A review of tissue-engineered skin bioconstructs available for skin reconstruction

Epidermal healing in burns: autologous keratinocyte transplantation as a standard procedure: update and perspective

Background:

Treatment of burned patients is a tricky clinical problem not only because of the extent of the physiologic abnormalities but also because of the limited area of normal skin available.

Methods:

Literature indexed in the National Center (PubMed) has been reviewed using combinations of key words (burns, children, skin graft, tissue engineering, and keratinocyte grafts). Articles investigating the association between burns and graft therapeutic modalities have been considered. Further literature has been obtained by analysis of references listed in reviewed articles.

Results:

Severe burns are conventionally treated with split-thickness skin autografts. However, there are usually not enough skin donor sites. For years, the question of how covering the wound surface became one of the major challenges in clinical research area and several procedures were proposed. The microskin graft is one of the oldest methods to cover extensive burns. This technique of skin expansion is efficient, but results remain inconsistent. An alternative is to graft cultured human epidermal keratinocytes. However, because of several complications and labor-intensive process of preparing grafts, the initial optimism for cultured epithelial autograft has gradually declined. In an effort to solve these drawbacks, isolated epithelial cells from selecting donor site were introduced in skin transplantation.

Conclusions:

Cell suspensions transplanted directly to the wound is an attractive process, removing the need for attachment to a membrane before transfer and avoiding one potential source of inefficiency. Choosing an optimal donor site containing cells with high proliferative capacity is essential for graft success in burns.

Proliferation of keratinocytes induced by adipose-derived stem cells on a chitosan scaffold and its role in wound healing, a review

In the field of tissue engineering and reconstruction, the development of efficient biomaterial is in high demand to achieve uncomplicated wound healing. Chronic wounds and excessive scarring are the major complications of tissue repair and, as this inadequate healing continues to increase, novel therapies and treatments for dysfunctional skin repair and reconstruction are important. This paper reviews the various aspects of the complications related to wound healing and focuses on chitosan because of its unique function in accelerating wound healing. The proliferation of keratinocytes is essential for wound closure, and adipose-derived stem cells play a significant role in wound healing. Thus, chitosan in combination with keratinocytes and adipose-derived stem cells may act as a vehicle for delivering cells, which would increase the proliferation of keratinocytes and help complete recovery from injuries.

A simple material model to generate epidermal and dermal layers in vitro for skin regeneration

There is an urgent need for a rationally-designed, cellularized skin graft capable of reproducing the micro-environmental cues necessary to promote skin healing and regeneration. To address this need, we developed a composite scaffold, namely, CA/C-PEG, composing of a porous chitosan-alginate (CA) structure impregnated with a thermally reversible chitosan-poly(ethylene glycol) (C-PEG) gel to incorporate skin cells as a bi-layered skin equivalent. Fibroblasts were encapsulated in C-PEG to simulate the dermal layer while the keratinocytes were seeded on the top of CA/C-PEG composite scaffold to mimic the epidermal layer. The CA scaffold provided mechanical support for the C-PEG gel and the C-PEG gel physically segregated the keratinocytes from fibroblasts in the construct. Three different tissue culture micro-environments were tested: CA scaffolds without C-PEG cultured in cell culture medium without air-liquid interface (-gel-interface), CA scaffolds impregnated with C-PEG and cultured in cell culture medium without air-liquid interface (-gel-interface), and CA scaffolds impregnated with C-PEG cultured in cell culture medium with air-liquid interface (-gel- interface). We found that the presence of C-PEG increased the cellular proliferation rates of both keratinocytes and fibroblasts, and the air-liquid interface induced keratinocyte maturation. This CA/C-PEG composite scaffold design is able to recapitulate micro-environments relevant to skin tissue engineering, and may be a useful tool for future skin tissue engineering applications.

Dermal papilla cells improve the wound healing process and generate hair bud-like structures in grafted skin substitutes using hair follicle stem cells

Tissue-engineered skin represents a useful strategy for the treatment of deep skin injuries and might contribute to the understanding of skin regeneration. The use of dermal papilla cells (DPCs) as a dermal component in a permanent composite skin with human hair follicle stem cells (HFSCs) was evaluated by studying the tissue-engineered skin architecture, stem cell persistence, hair regeneration, and graft-take in nude mice. A porcine acellular dermal matrix was seeded with HFSCs alone and with HFSCs plus human DPCs or dermal fibroblasts (DFs). In vitro, the presence of DPCs induced a more regular and multilayered stratified epidermis with more basal p63-positive cells and invaginations. The DPC-containing constructs more accurately mimicked the skin architecture by properly stratifying the differentiating HFSCs and developing a well-ordered epithelia that contributed to more closely recapitulate an artificial human skin. This acellular dermal matrix previously repopulated in vitro with HFSCs and DFs or DPCs as the dermal component was grafted in nude mice. The presence of DPCs in the composite substitute not only favored early neovascularization, good assimilation and remodeling after grafting but also contributed to the neovascular network maturation, which might reduce the inflammation process, resulting in a better healing process, with less scarring and wound contraction. Interestingly, only DPC-containing constructs showed embryonic hair bud-like structures with cells of human origin, presence of precursor epithelial cells, and expression of a hair differentiation marker. Although preliminary, these findings have demonstrated the importance of the presence of DPCs for proper skin repair.

Gene therapy: pursuing restoration of dermal adhesion in recessive dystrophic epidermolysis bullosa

The replacement of a defective gene with a fully functional copy is the goal of the most basic gene therapy. Recessive dystrophic epidermolysis bullosa (RDEB) is characterised by a lack of adhesion of the epidermis to the dermis. It is an ideal target for gene therapy as all variants of hereditary RDEB are caused by mutations in a single gene, COL7A1, coding for type VII collagen, a key component of anchoring fibrils that secure attachment of the epidermis to the dermis. RDEB is one of the most severe variants in the epidermolysis bullosa (EB) group of heritable skin diseases. Epidermolysis bullosa is defined by chronic fragility and blistering of the skin and mucous membranes due to mutations in the genes responsible for production of the basement membrane proteins. This condition has a high personal, medical and socio-economic impact. People with RDEB require a broad spectrum of medications and specialised care. Due to this being a systemic condition, most research focus is in the area of gene therapy. Recently, preclinical works have begun to show promise. They focus on the virally mediated ex vivo correction of autologous epithelium. These corrected cells are then to be expanded and grafted onto the patient following the lead of the first successful gene therapy in dermatology being a grafting of corrected tissue for junctional EB treatment. Current progress, outstanding challenges and future directions in translating these approaches in clinics are reviewed in this article.

Human epidermal keratinocyte cell response on integrin-specific artificial extracellular matrix proteins

Cell-matrix interactions play critical roles in regulating cellular behavior in wound repair and regeneration of the human skin. In particular, human skin keratinocytes express several key integrins such as alpha5beta1, alpha3beta1, and alpha2beta1 for binding to the extracellular matrix (ECM) present in the basement membrane in uninjured skin. To mimic these key integrin-ECM interactions, artificial ECM (aECM) proteins containing functional domains derived from laminin 5, type IV collagen, fibronectin, and elastin are prepared. Human skin keratinocyte cell responses on the aECM proteins are specific to the cell-binding domain present in each construct. Keratinocyte attachment to the aECM protein substrates is also mediated by specific integrin-material interactions. In addition, the aECM proteins are able to support the proliferation of keratinocyte stem cells, demonstrating their promise for use in skin tissue engineering.

Collagen and hyaluronan at wound sites influence early polymicrobial biofilm adhesive events

BACKGROUND

Wounds can easily become chronically infected, leading to secondary health complications, which occur more frequently in individuals with diabetes, compromised immune systems, and those that have suffered severe burns. When wounds become chronically infected, biofilm producing microbes are often isolated from these sites. The presence of a biofilm at a wound site has significant negative impact on the treatment outcomes, as biofilms are characteristically recalcitrant to removal, in part due to the formation of a protective matrix that shield residents organisms from inimical forces. Pseudomonas aeruginosa and methicillin-resistant Staphylococcus aureus (MRSA) are two of the organisms most prevalently isolated from wound sites, and are of particular concern due to their elevated levels of antibiotic resistance, rapid growth, and exotoxin production. In order to understand the biofilm forming abilities of these microbes in a simulated wound environment we used a microtiter plate assay to assess the ability of these two organisms to bind to proteins that are typically found at wound sites: collagen and hyaluronan.

RESULTS

Collagen and hyaluronan were used to coat the wells of 96-well plates in collagen:hyaluronan ratios of 0:1, 3:1, 1:1, 1:3, and 1:0 . P. aeruginosa and MRSA were inoculated as mono- and co-cultures (1:1 and a 3:1 MRSA: P. aeruginosa). We determined that coating the wells with collagen and/or hyaluronan significantly increased the biofilm biomass of attached cells compared to an uncoated control, although no one coating formulation showed a significant increase compared to any other combination. We also noted that the fold-change increase for MRSA upon coating was greater than for P. aeruginosa.

CONCLUSIONS

Our study suggests that the presence of collagen and/or hyaluronan at wound sites may be an important factor that influences the attachment and subsequent biofilm formation of notorious biofilm-formers, such as MRSA and P. aeruginosa. Understanding the kinetics of binding may aid in our comprehension of recalcitrant wound infection development, better enabling our ability to design therapies that would prevent or mitigate the negative outcomes associated with such infections.

The in vitro characterization of a gelatin scaffold, prepared by cryogelation and assessed in vivo as a dermal replacement in wound repair

A sheet gelatin scaffold with attached silicone pseudoepidermal layer for wound repair purposes was produced by a cryogelation technique. The resulting scaffold possessed an interconnected macroporous structure with a pore size distribution of 131 ± 17 μm at one surface decreasing to 30 ± 8 μm at the attached silicone surface. The dynamic storage modulus (G') and mechanical stability were comparable to the clinical gold standard dermal regeneration template, Integra®. The scaffolds were seeded in vitro with human primary dermal fibroblasts. The gelatin based material was not only non-cytotoxic, but over a 28 day culture period also demonstrated advantages in cell migration, proliferation and distribution within the matrix when compared with Integra®. When seeded with human keratinocytes, the neoepidermal layer that formed over the cryogel scaffold appeared to be more advanced and mature when compared with that formed over Integra®. The in vivo application of the gelatin scaffold in a porcine wound healing model showed that the material supports wound healing by allowing host cellular infiltration, biointegration and remodelling. The results of our in vitro and in vivo studies suggest that the gelatin based scaffold produced by a cryogelation technique is a promising material for dermal substitution, wound healing and other potential biomedical applications.

Translating cell-based regenerative medicines from research to successful products: challenges and solutions

The Tissue Engineering & Regenerative Medicine International Society-Europe (TERMIS-EU) Industry Committee as well as its TERMIS-Americas (AM) counterpart intend to address the specific challenges and needs facing the industry in translating academic research into commercial products. Over the last 3 years, the TERMIS-EU Industry Committee has worked with commercial bodies to deliver programs that encourage academics to liaise with industry in proactive collaborations. The TERMIS-EU 2013 Industry Symposium aimed to build on this commercial agenda by focusing on two topics: Operations Management (How to move a process into the good manufacturing practice [GMP] environment) and Clinical Translation (Moving a GMP process into robust trials). These topics were introduced by providing the synergistic business perspective of partnering between the multiple regenerative medicine stakeholders, throughout the life cycle of product development. Seven industry leaders were invited to share their experience, expertise, and strategies. Due to the complex nature of regenerative medicine products, partnering for their successful commercial development seems inevitable to overcome all obstacles by sharing experiences and expertise of all stakeholders. When ideally implemented, the "innovation quotient" of a virtual team resulting from the combination of internal and external project teams can be maximized through maximizing the three main dimensions: core competences, technology portfolio, and alliance management.

Effects of mature adipocyte-derived dedifferentiated fat (DFAT) cells on generation and vascularisation of dermis-like tissue after artificial dermis grafting

Although artificial dermis (AD) is effective for skin reconstruction, it requires two separate procedures, because the AD must be vascularised before skin grafts. To shorten the period of the dermis-like tissue generation before the secondary skin grafting must be beneficial. Dedifferentiated fat (DFAT) cells are isolated from mature adipose cell suspensions and have potential to differentiate into multiple cell types including endothelial cells. This study aimed to investigate effects of DFAT cells on dermal regeneration after AD grafts in rats. The effects of combination use of DFAT cells and basic fibroblast growth factor (bFGF) were also tested to mimic clinical situations. DFAT cells were isolated from SD rats. Full-thickness wounds were created on the back of rats followed by AD grafting. Five groups were established; Group I: control, Group II: treated with DFAT cells, Group III: treated with bFGF, Group IV: treated with both of DFAT cells and bFGF, and Group V: treated with Green fluorescent protein (GFP)-labelled DFAT cells and bFGF. Histological evaluation was serially performed. Group IV showed markedly promoted vascularisation of dermis-like tissue. In particular, capillary infiltration into the dermis was obtained within 2 days. Immunohistochemical examination revealed that the transplanted DFAT cells had differentiated into endothelial cells and participated in angiogenesis. Group IV also showed a marked increase in the thickness of the dermis like tissue. The present results suggest that the use of DFAT cells under bFGF treatment could be beneficial to shorten the period required for dermal regeneration and vascularisation and contribute to use AD more effectively and safely.

Topical N-acetylcysteine accelerates wound healing in vitro and in vivo via the PKC/Stat3 pathway

N-Acetylcysteine (Nac) is an antioxidant administered in both oral and injectable forms. In this study, we used Nac topically to treat burn wounds in vitro and in vivo to investigate mechanisms of action. In vitro, we monitored glutathione levels, cell proliferation, migration, scratch-wound healing activities and the epithelialization-related proteins, matrixmetalloproteinase-1 (MMP-1) and proteins involved in regulating the expression of MMP-1 in CCD-966SK cells treated with Nac. Various Nac concentrations (0.1, 0.5, and 1.0 mM) increased glutathione levels, cell viability, scratch-wound healing activities and migration abilities of CCD-966SK cells in a dose-dependent manner. The MMP-1 expression of CCD-966SK cells treated with 1.0 mM Nac for 24 h was significantly increased. Levels of phosphatidylinositol 3-kinase (PI3K), protein kinase C (PKC), janus kinase 1 (Jak1), signal transducer and activator of transcription 3 (Stat3), c-Fos and Jun, but not extracellular signal-regulated protein kinases 1 and 2 (Erk1/2), were also significantly increased in a dose-dependent manner compared to the controls. In addition, Nac induced collagenous expression of MMP-1 via the PKC/Stat3 signaling pathway. In vivo, a burn wound healing rat model was applied to assess the stimulation activity and histopathological effects of Nac, with 3.0% Nac-treated wounds being found to show better characteristics on re-epithelialization. Our results demonstrated that Nac can potentially promote wound healing activity, and may be a promising drug to accelerate burn wound healing.

Reconstruction after skin cancer excision through a dermal induction template: our experience

Dermal substitutes offer alternative approaches for wounds of all thicknesses where sufficient donation sites are not available for self-grafts. Several dermal substitutes are described in literature. This study included 20 patients treated with a dermal induction template after the removal of malignant skin cancers situated in various parts of the body. The participants were especially aged patients with multiple skin cancers, and complex clinical conditions, often affected by pathologies such as cardiopathy, diabetes mellitus, and hypercholesterolaemia, and receiving pharmacological multi-therapies, particularly antiplatelets and anticoagulants. In many of these patients, the general complex clinical picture provided significant contraindication for complex reconstructive surgery because of the high risk involved. All patients achieved complete healing about 8 weeks after the first surgery. By using a dermal induction template, it was possible to cover substantial loss of substances without the need of autologous tissue, with smoother and less apparent scar, minor occurrence of hypertrophic and retracted scars, better flexibility of healed skin and therefore a better result from an aesthetic point of view.

Effect of Extracts of Terminalia chebula on Proliferation of Keratinocytes and Fibroblasts Cells: An Alternative Approach for Wound Healing

Terminalia chebula is one of the traditional medicines used in the treatment of many diseases. In the present work, different concentrations of various organic and aqueous extracts (solvent-free) of T. chebula were tested on fibroblast (L929) and keratinocytes cells to evaluate its biocompatible concentration by using MTT and live-dead viability/cytotoxic assay. These extracts were found to be effective in decreasing the ammonia accumulation in the media, thereby reducing its toxic effect on cells. DPPH assay further confirmed the free-radical scavenging ability of the extracts which increased with the increase in concentration of each extract. Cell proliferation/apoptosis, cytoskeletal structure, and ECM production were further evaluated by live-dead assay and phalloidin/cytokeratin staining, respectively. The cytoskeletal structure and ECM secretion of the cells treated with extracts showed higher cellular activity in comparison to control. In conclusion, we have demonstrated the effect of these extracts of T. chebula on both types of skin cells and optimized concentration in which it could be used as a bioactive component for wound healing applications by increasing cell proliferation and decreasing free-radical production without affecting the normal cellular matrix. It can also find applications in other therapeutics applications where ammonia toxicity is a limiting factor.

Treating the whole not the hole: necessary coupling of technologies for diabetic foot ulcer treatment

Type 2 diabetes is the epidemic of our generation, and diabetic foot ulcers (DFUs) are a major complication. Although DFU formation itself can indicate disease progression, the failure to effectively treat ulcers contributes further to a decay in patient quality of life and increased mortality. Herein we discuss the development of next-generation DFU therapies including: (i) topical growth factors, (ii) scaffolds, and (iii) cellular therapies. Individually these therapies have yielded measurable but modest improvements in DFU repair. Because DFUs arise as a result of multiple biochemical deficiencies, a singular treatment modality is unlikely to be effective. Next-generation DFU technologies must be combined to address effectively the complex underlying pathology and enable reliable DFU repair.

Engineering the extracellular matrix for clinical applications: endoderm, mesoderm, and ectoderm

Tissue engineering is rapidly progressing from a research-based discipline to clinical applications. Emerging technologies could be utilized to develop therapeutics for a wide range of diseases, but many are contingent on a cell scaffold that can produce proper tissue ultrastructure. The extracellular matrix, which a cell scaffold simulates, is not merely a foundation for tissue growth but a dynamic participant in cellular crosstalk and organ homeostasis. Cells change their growth rates, recruitment, and differentiation in response to the composition, modulus, and patterning of the substrate on which they reside. Cell scaffolds can regulate these factors through precision design, functionalization, and application. The ideal therapy would utilize highly specialized cell scaffolds to best mimic the tissue of interest. This paper discusses advantages and challenges of optimized cell scaffold design in the endoderm, mesoderm, and ectoderm for clinical applications in tracheal transplant, cardiac regeneration, and skin grafts, respectively.

Bioengineered alternative tissues

Bioengineered alternative tissues (BATs) are heterogeneous processed materials used to aid in wound closure of diabetic foot ulcers. There has been significant progress in the development and clinical use of BATs in the last decade. BATs may be derived from an autograft, allograft, or xenograft source. They may be a single-layer material and consist of only an epidermal or dermal component or they may be bilayer, consisting of both epidermal and dermal components. The holy grail of tissue replacement has yet to be discovered. Nevertheless, if researchers and bioengineers can flip the switch to return cells to their prenatal period, this can be a breakthrough in cellular regeneration.

Design and fabrication of human skin by three-dimensional bioprinting

Three-dimensional (3D) bioprinting, a flexible automated on-demand platform for the free-form fabrication of complex living architectures, is a novel approach for the design and engineering of human organs and tissues. Here, we demonstrate the potential of 3D bioprinting for tissue engineering using human skin as a prototypical example. Keratinocytes and fibroblasts were used as constituent cells to represent the epidermis and dermis, and collagen was used to represent the dermal matrix of the skin. Preliminary studies were conducted to optimize printing parameters for maximum cell viability as well as for the optimization of cell densities in the epidermis and dermis to mimic physiologically relevant attributes of human skin. Printed 3D constructs were cultured in submerged media conditions followed by exposure of the epidermal layer to the air-liquid interface to promote maturation and stratification. Histology and immunofluorescence characterization demonstrated that 3D printed skin tissue was morphologically and biologically representative of in vivo human skin tissue. In comparison with traditional methods for skin engineering, 3D bioprinting offers several advantages in terms of shape- and form retention, flexibility, reproducibility, and high culture throughput. It has a broad range of applications in transdermal and topical formulation discovery, dermal toxicity studies, and in designing autologous grafts for wound healing. The proof-of-concept studies presented here can be further extended for enhancing the complexity of the skin model via the incorporation of secondary and adnexal structures or the inclusion of diseased cells to serve as a model for studying the pathophysiology of skin diseases.

Glucomannan-poly(N-vinyl pyrrolidinone) bicomponent hydrogels for wound healing

Polysaccharides interact with cells in ways that can be conducive to wound healing. We have recently reported that konjac glucomannan (KGM) which is comprised of d-mannose and d-glucose linked by β-1,4 glycosidic chains, stimulates fibroblast proliferation. The aim of this study was to produce a range of crosslinked KGMs and bicomponent KGM containing hydrogels and to examine their potential for wound healing. Two types of KGM hydrogel were synthesized, biodegradable from crosslinked KGM and non-biodegradable by forming semi-IPNs and graft-conetworks with a second synthetic component, poly(N-vinyl pyrrolidinone-co-poly(ethyleneglycol)diacrylate) (P(NVP-co-PEGDA)), which was produced by UV initiated radical polymerization. Crosslinked KGM was formed by bimolecular termination of macro-radicals formed by oxidation with Ce(iv). Semi-IPNs were formed by copolymerization of NVP and PEGDA in the presence of KGM and in the graft-conetworks the KGM was also crosslinked using the Ce(iv) procedure. The hydrogels had different swelling properties and differences could be observed in their chemical structure using ¹³C solid state NMR, DSC and FTIR. Both forms were cytocompatible but only the graft-conetworks had the ability to stimulate fibroblast metabolic activity and to stimulate the migration of both fibroblasts and keratinocytes. In conclusion a form of KGM hydrogel has been produced that could benefit wound healing.

Combinatorial biomatrix/cell-based therapies for restoration of host tissue architecture and function

This Progress Report reviews recent advances in the utility of extracellular matrix (ECM)-mimic biomaterials in presenting and delivering therapeutic cells to promote tissue healing. This overview gives a brief introduction of different cell types being used in regenerative medicine and tissue engineering while addressing critical issues that must be overcome before cell-based approaches can be routinely employed in the clinic. A selection of five commonly used cell-associated, biomaterial platforms (collagen, hyaluronic acid, fibrin, alginate, and poly(ethylene glycol)) are reviewed for treatment of a number of acute injury or diseases with emphasis on animal models and clinical trials. This article concludes with current challenges and future perspectives regarding foreign body host response to biomaterials and immunological reactions to allogeneic or xenogeneic cells, vascularization and angiogenesis, matching mechanical strength and anisotropy of native tissues, as well as other non-technical issues regarding the clinical translation of biomatrix/cell-based therapies.

Micropatterned dermal-epidermal regeneration matrices create functional niches that enhance epidermal morphogenesis

Although tissue engineered skin substitutes have demonstrated some clinical success for the treatment of chronic wounds such as diabetic and venous ulcers, persistent graft take and stability remain concerns. Current bilayered skin substitutes lack the characteristic microtopography of the dermal-epidermal junction that gives skin enhanced mechanical stability and creates cellular microniches that differentially promote keratinocyte function to form skin appendages and enhance wound healing. We developed a novel micropatterned dermal-epidermal regeneration matrix (μDERM) which incorporates this complex topography and substantially enhances epidermal morphology. Here, we describe the use of this three-dimensional (3-D) in vitro culture model to systematically evaluate different topographical geometries and to determine their relationship to keratinocyte function. We identified three distinct keratinocyte functional niches: the proliferative niche (narrow geometries), the basement membrane protein synthesis niche (wide geometries) and the putative keratinocyte stem cell niche (narrow geometries and corners). Specifically, epidermal thickness and keratinocyte proliferation is significantly (p<0.05) increased in 50 and 100 μm channels while laminin-332 deposition is significantly (p<0.05) increased in 400 μm channels compared to flat controls. Additionally, β1(bri)p63(+) keratinocytes, putative keratinocyte stem cells, preferentially cluster in channel geometries (similar to clustering observed in native skin) compared to a random distribution on flats. This study identifies specific target geometries to enhance skin regeneration and graft performance. Furthermore, these results suggest the importance of μDERM microtopography in designing the next generation of skin substitutes. Finally, we anticipate that 3-D organotypic cultures on μDERMS will provide a novel tissue engineered skin substitute for in vitro investigations of skin morphogenesis, wound healing and pathology.

Regeneration of the limb: opinions on the reality

Whenever the topic of re-growing human limbs is posed for discussion, it is often argued that ‘if a newt can do it, then so can we’. This notion, albeit promising, is somewhat like watching a science-fiction film; the individual components are currently available but we are far from realizing the complete picture. Today’s reality is that if we are faced with a limb-severing injury, any regenerative attempt would endeavour to accelerate the pace at which the tissue heals to a clinically relevant/functional state. The science of limb regeneration can be approached from three different angles, developmental biology; regenerative medicine; and tissue engineering. This opinion piece describes how each approach can be used to understand the concepts behind regeneration, how far each approach has advanced and the hurdles faced by each of the approaches.

Advancements in electrospinning of polymeric nanofibrous scaffolds for tissue engineering

Polymeric nanofibers have potential as tissue engineering scaffolds, as they mimic the nanoscale properties and structural characteristics of native extracellular matrix (ECM). Nanofibers composed of natural and synthetic polymers, biomimetic composites, ceramics, and metals have been fabricated by electrospinning for various tissue engineering applications. The inherent advantages of electrospinning nanofibers include the generation of substrata with high surface area-to-volume ratios, the capacity to precisely control material and mechanical properties, and a tendency for cellular in-growth due to interconnectivity within the pores. Furthermore, the electrospinning process affords the opportunity to engineer scaffolds with micro- to nanoscale topography similar to the natural ECM. This review describes the fundamental aspects of the electrospinning process when applied to spinnable natural and synthetic polymers; particularly, those parameters that influence fiber geometry, morphology, mesh porosity, and scaffold mechanical properties. We describe cellular responses to fiber morphology achieved by varying processing parameters and highlight successful applications of electrospun nanofibrous scaffolds when used to tissue engineer bone, skin, and vascular grafts.

Tissue-engineered skin substitutes: an overview

Extensive skin loss and chronic wounds are still a significant challenge to clinicians: even if injured epidermis is normally able to self-renew, deep injuries can cause negative regulation of the wound healing cascade, leading to chronic wound formation. Skin-autografting surgical procedures are often limited by the poor availability of healthy tissue, whereas the use of non-self-tissues for allografts presents some severe risks. Tissue-engineered skin substitutes have recently become viable as a suitable alternative to auto- and allografts. However, biologists, biochemists, and technical engineers are still struggling to produce complex skin substitutes that can readily be transplanted in large quantities. The ambitious goal is now to construct a dermoepidermal substitute that rapidly vascularizes and optimally supports a stratifying epidermal graft on a biodegradable matrix. This review analyzes these aspects in light of the available literature and the authors' experience.

Skin and hair on-a-chip: in vitro skin models versus ex vivo tissue maintenance with dynamic perfusion

Substantial progress has been achieved over the last few decades in the development of skin equivalents to model the skin as an organ. However, their static culture still limits the emulation of essential physiological properties crucial for toxicity testing and compound screening. Here, we describe a dynamically perfused chip-based bioreactor platform capable of applying variable mechanical shear stress and extending culture periods. This leads to improvements of culture conditions for integrated in vitro skin models, ex vivo skin organ cultures and biopsies of single hair follicular units.

Current progress of skin tissue engineering: Seed cells, bioscaffolds, and construction strategies

The development of cell biology, molecular biology, and material science, has been propelling biomimic tissue-engineered skins to become more sophisticated in scientificity and more simplified in practicality. In order to improve the safety, durability, elasticity, biocompatibility, and clinical efficacy of tissue-engineered skin, several powerful seed cells have already found their application in wound repair, and a variety of bioactive scaff olds have been discovered to influence cell fate in epidermogenesis. These exuberant interests provide insights into advanced construction strategies for complex skin mimics. Based on these exciting developments, a complete full-thickness tissue-engineered skin is likely to be generated.

Integration of scaffolds into full-thickness skin wounds: the connexin response

Scaffolds have been reported to promote healing of hard-to-heal wounds such as burns and chronic ulcers. However, there has been little investigation into the cell biology of wound edge tissues in response to the scaffolds. Here, we assess the impact of collagen scaffolds on mouse full-thickness wound re-epithelialisation during the first 5 days of healing. We find that scaffolds impede wound re-epithelialisation, inducing a bulbous thickening of the wound edge epidermis as opposed to the thin tongue of migratory keratinocytes seen in normal wound healing. Scaffolds also increase the inflammatory response and the numbers of neutrophils in and around the wound. These effects were also produced by scaffolds made of alginate in the form of fibers and microspheres, but not as an alginate hydrogel. In addition, we find the gap junction protein connexin 43, which normally down-regulates at the wound edge during re-epithelialisation, to be up-regulated in the bulbous epidermal wound edge. Incorporation of connexin 43 antisense oligodeoxynucleotides into the scaffold can be performed to reduce inflammation whilst promoting scaffold biocompatibility.

The development of a 3D immunocompetent model of human skin

As the first line of defence, skin is regularly exposed to a variety of biological, physical and chemical insults. Therefore, determining the skin sensitization potential of new chemicals is of paramount importance from the safety assessment and regulatory point of view. Given the questionable biological relevance of animal models to human as well as ethical and regulatory pressure to limit or stop the use of animal models for safety testing, there is a need for developing simple yet physiologically relevant models of human skin. Herein, we describe the construction of a novel immunocompetent 3D human skin model comprising of dendritic cells co-cultured with keratinocytes and fibroblasts. This model culture system is simple to assemble with readily-available components and importantly, can be separated into its constitutive individual layers to allow further insight into cell-cell interactions and detailed studies of the mechanisms of skin sensitization. In this study, using non-degradable microfibre scaffolds and a cell-laden gel, we have engineered a multilayer 3D immunocompetent model comprised of keratinocytes and fibroblasts that are interspersed with dendritic cells. We have characterized this model using a combination of confocal microscopy, immuno-histochemistry and scanning electron microscopy and have shown differentiation of the epidermal layer and formation of an epidermal barrier. Crucially the immune cells in the model are able to migrate and remain responsive to stimulation with skin sensitizers even at low concentrations. We therefore suggest this new biologically relevant skin model will prove valuable in investigating the mechanisms of allergic contact dermatitis and other skin pathologies in human. Once fully optimized, this model can also be used as a platform for testing the allergenic potential of new chemicals and drug leads.

A Paradigm of Fibroblast Activation and Dermal Wound Contraction to Guide the Development of Therapies for Chronic Wounds and Pathologic Scars

SIGNIFICANCE

Delayed wound healing and pathologic scarring are abnormal processes that can be thought of as occurring on a wound healing continuum, where insufficient wound contraction leads to nonhealing wounds, and overexuberant wound contraction leads to scarring. Chronic nonhealing wounds, including diabetic foot wounds, decubitus ulcers, and venous stasis ulcers, affect millions of people annually in the United States and costs billions of dollars. Similarly, pathologic scaring affects more than 40 million Americans annually and also costs billions of dollars.

CRITICAL ISSUES

While there are multiple factors that contribute to chronic nonhealing wounds and pathologic scars, a derangement in wound contraction is common to both. In this article, we will present a paradigm of dermal wound contraction, derived from clinical observations and basic science evidence, which pertains to chronic nonhealing wounds and pathologic scars.

RECENT ADVANCES

We will review how select therapies currently under investigation and in development fit the paradigm.

FUTURE DIRECTIONS

The paradigm will facilitate translational research and enable the development of future innovative therapies.

RNAi functionalized scaffold for scarless skin regeneration

Combination of a 3-D scaffold with the emerging RNA interference (RNAi) technique represents the latest paradigm of regenerative medicine. In our recent paper "RNAi functionalized collagen-chitosan/silicone membrane bilayer dermal equivalent for full-thickness skin regeneration with inhibited scarring" in the journal Biomaterial, we not only demonstrated a 3-D system for siRNA sustained delivery, but also presented a comprehensive in vivo study by targeting a vital problem in skin regeneration: scarring. It is expected that further development of this kind of RNAi functionalized scaffold can provide a better platform for directing cell fates by integrating the "down-regulating" biomolecular cues into the cellular microenvironment, leading to the complete functional regeneration of skin.

The Use of EZ Derm® in Partial-Thickness Burns: An Institutional Review of 157 Patients

OBJECTIVES

To evaluate the use of EZ Derm® (Molnlycke Health Care, US, LLC, Norcross, GA) on partial-thickness burns.

METHODS

A retrospective review of medical records from patients presenting to the Tampa General Regional Burn Center from January 1, 2008, through January 1, 2012, was conducted. A hospitalwide list of patients was generated on the basis of the presence of charge codes for EZ Derm®. All encounters that did not pass through the Burn Unit were excluded. Applicable charts were reviewed for basic patient characteristics, burn characteristics, outcomes, and complications. Complications were defined as premature separation of EZ Derm®, deviation from a flat fully epithelized wound at the time of final EZ Derm® separation and hypertrophic/keloid scaring.

RESULTS

A total of 157 patients were identified and met the study criteria. Eighteen complications were reported from 16 of the 157 patients. Complications were attributed to positioning (2/133 = 1.5%), infection (4/133 = 3.0%), incomplete epithelialization at time of separation (3/133 = 2.2%), need for additional excision and grafting (6/133 = 4.5%), hypertrophic scaring (2/60 = 3.3), and cryptogenic (1/133 = 0.75).

CONCLUSIONS

EZ Derm® has proven to be a robust wound dressing that provides cost-effective, consistent durable wound coverage with minimal complications that resolve without long-term sequela.

Engineering a biocompatible scaffold with either micrometre or nanometre scale surface topography for promoting protein adsorption and cellular response

Surface topographical features on biomaterials, both at the submicrometre and nanometre scales, are known to influence the physicochemical interactions between biological processes involving proteins and cells. The nanometre-structured surface features tend to resemble the extracellular matrix, the natural environment in which cells live, communicate, and work together. It is believed that by engineering a well-defined nanometre scale surface topography, it should be possible to induce appropriate surface signals that can be used to manipulate cell function in a similar manner to the extracellular matrix. Therefore, there is a need to investigate, understand, and ultimately have the ability to produce tailor-made nanometre scale surface topographies with suitable surface chemistry to promote favourable biological interactions similar to those of the extracellular matrix. Recent advances in nanoscience and nanotechnology have produced many new nanomaterials and numerous manufacturing techniques that have the potential to significantly improve several fields such as biological sensing, cell culture technology, surgical implants, and medical devices. For these fields to progress, there is a definite need to develop a detailed understanding of the interaction between biological systems and fabricated surface structures at both the micrometre and nanometre scales.

Human split-thickness skin allograft: skin substitute in the treatment of burn

BACKGROUND

Human skin allograft has been used as wound coverage for a long time; it is one of the most successful and widely used dressings for burn wounds in the world.

OBJECTIVE

To prepare a freeze-dried human split-thickness skin allograft and evaluate its cytotoxicity, the structure and physical properties after processing methods and clinical efficacy in burn patients.

METHODS

After ensuring tissue safety, we lyophilized human cadaveric partial thickness skin and exposed it to gamma radiation. Histopathological and immunohistochemical properties, tensile strength and in vitro cytotoxicity were assayed for the skin samples. Then, we tested the samples in 11 patients with deep skin burn.

RESULTS

On histological and histopathological examinations, we found a normal skin structure. The tensile strength of the rehydrated freeze-dried human skin allograft was not lesser than the fresh human skin. Cell viability in MTT testing was more than 95%. None of our patients showed any signs of immunological reactions or complications.

CONCLUSION

Gamma-irradiated freeze-dried human split-thickness skin is safe and non-toxic and can be used for the treatment of patients with deep skin burn.

Healing potential of mesenchymal stem cells cultured on a collagen-based scaffold for skin regeneration

BACKGROUND

Wound healing of burned skin remains a major goal in public health. Previous reports showed that the bone marrow stem cells were potent in keratinization and vascularization of full thickness skin wounds.

METHODS

In this study, mesenchymal stem cells were derived from rat adipose tissues and characterized by flowcytometry. Staining methods were used to evaluate their differentiation ability. A collagen-chitosan scaffold was prepared by freeze-drying method and crosslinked by carbodiimide-based crosslinker.

RESULTS

The results of immunecytochemistry and PCR experiments confirmed the adipose-derived stem cells (ASC) in differentiation to the keratinocytes under the treatment of keratinocyte growth factor. The isolated ASC were seeded on the scaffolds and implanted at the prepared wounds. The scaffolds without cells were considered as a control and implanted on the other side of the rat. Histopathological analyses confirmed the formation of new tissue on the scaffold-cell side after 14 days with the formation of dermis and epidermis.

CONCLUSION

These results indicated the capacity of ASC in differentiation to keratinocytes and also wound healing in vivo.

Regenerative materials that facilitate wound healing

Wounds and damaged tissue become problematic when the tissue repair process does not proceed in a normal manner. Standard treatment of wounds entails topical dressings and devices in conjunction with good wound care practices. Good practices adequately support healing in most patients. Difficult, chronic, or recalcitrant wounds may require the use of more advanced technologies. Wounds that are full thickness or present with the absence of a matrix, may particularly benefit from regenerative materials. This article focuses on the use of cellular and acellular materials as well as chemical constructs to support granulation, tissue repair, and wound closure.

Nanofibrous structured biomimetic strategies for skin tissue regeneration

Mimicking porous topography of natural extracellular matrix is advantageous for successful regeneration of damaged tissues or organs. Nanotechnology being one of the most promising and growing technology today shows an extremely huge potential in the field of tissue engineering. Nanofibrous structures that mimic the native extracellular matrix and promote the adhesion of various cells are being developed as tissue-engineered scaffolds for skin, bone, vasculature, heart, cornea, nervous system, and other tissues. A range of novel biocomposite materials has been developed to enhance the bioactive or therapeutic properties of these nanofibrous scaffolds via surface modifications, including the immobilization of functional cell-adhesive ligands and bioactive molecules such as drugs, enzymes, and cytokines. In skin tissue engineering, usage of allogeneic skin is avoided to reestablish physiological continuity and also to address the challenge of curing acute and chronic wounds, which remains as the area of exploration with various biomimetic approaches. Two-dimensional, three-dimensional scaffolds and stem cells are presently used as dermal regeneration templates for the treatment of full-thickness skin defects resulting from injuries and severe burns. The present review elaborates specifically on the fabrication of nanofibrous structured strategies for wound dressings, wound healing, and controlled release of growth factors for skin tissue regeneration.

Bioengineered matrices--part 2: focal adhesion, integrins, and the fibroblast effect

Initial efforts at biologic skin replacement strategies were mainly directed toward keratinocyte regeneration and epithelial replacement. It soon became evident that without a good dermal scaffold, the long-term efficacy of epithelial replacement was very limited. Further studies have focused on matrix replacement predominantly involving collagen frameworks with or without cellular additions. The fibroblast is central to the process of dermal regeneration and to the success of biologic matrix design. The sequence of cellular focal adhesion, integrin phosphorylated activation, intracellular and extracellular signaling, cytoskeletal activation, changes in cell morphology, and cytokine growth factor interaction are all important in influencing cell proliferation, cell spreading, neocollagenesis, and collagen translocation. A basic acellular matrix with chemical composition and correct physical structure (pore size and resistance) that takes cognizance of this sequence of matrix deposition and fibroblast functionality should be successful in promoting intrinsic healing and dermal replacement.

Bioengineered matrices--part 1: attaining structural success in biologic skin substitutes

Skin defect closure after injury or disease may present significant reconstructive challenges. Traditional epidermal coverage alone in the form of skin grafts often fall short in providing stable cover to restore structure and function of the skin. Excessive wound contraction and scar formation, particularly in defects of dermis and epidermis, may create functional and aesthetic problems. Progress in our understanding of molecular biology and tissue engineering have produced major advances in skin substitute technology, particularly relating to the dynamic cellular/extracellular matrix interaction that is critical to successful incorporation of a skin substitute. However, currently available skin substitutes still exhibit a range of problems including excessive wound contraction and scar formation, poor host tissue incorporation, revascularization and, in some cases, structural deficiencies in matrix design. The design principles and structural composition of the matrix must take into account collagenous forms, inherent resistance, porosity, and hydration. The ultimate matrix should be one that promotes intrinsic regeneration by encouraging cellular incorporation and cellular/extracellular cross communication. Attention to basic structural details rather than reliance on specialized cellular or peptide additions to the mix may well produce the advances we seek in improved incorporation of bioengineered skin substitutes.