Structural change and swelling mechanism of pH-sensitive hydrogels based on chitosan andD,L-lactic acid

Biocide physically cross-linked hydrogels based on carrageenan and guanidinium polyampholytes for wound healing applications

Over last years, hydrogels based on natural polymers have attracted considerable interest as materials for wound healing. Herein, hydrogel films based on kappa-carrageenan and guanidinium polyampholytes were prepared by the in situ physical cross-linking with potassium chloride and borax, respectively. The polyampholytes were obtained by a free radical copolymerization of 2,2-diallyl-1,1,3,3-tetraethylguanidinium chloride and unsaturated acids. To characterize the composite films, NMR, FTIR, SEM, TGA, XRD, element analysis and tensile test were used. Ampicillin was incorporated into the hydrogels to enhance wound healing potential. The healing-related characteristics, including swelling ratio, drug release and antimicrobial activity, were assessed. The equilibrium swelling ratios were in the range of 3.9-6.5 depending on the polyampholyte composition. According to the in vitro ampicillin release studies, 30-43 % of ampicillin was released from the hydrogels after 5 h at 37 °C and pH 7.4, with drug release being temperature and pH dependent. The ampicillin-loaded films showed a remarkable antimicrobial effect. The inhibition sizes for Escherichia coli and Staphylococcus aureus were 1.10-1.85 and 1.95-2.60 cm, respectively. Although the bi-polymeric hydrogels were thoroughly characterized, with the in vitro study of their biocidal effects carried out in this work, the in vivo drug release assessment needs to be further explored.

Proline conjugated chitosan as wound healing material: In vitro studies on the influence of the scaffold on collagen production and wound healing

The present study reports the development of L-proline conjugated chitosan scaffold for wound healing application. Proline plays a beneficial role in collagen synthesis, and as a biochemical, it has the potential to modulate wound healing. In this regard, amino acid L-proline was conjugated onto chitosan, and the scaffolds were synthesised. FTIR and NMR analysis confirmed amino acid conjugation. The prepared scaffold was characterized by studies such as swelling, dissolution, tensile strength, porosity, water-vapor transmission rate and in-vitro healing properties. Cell viability assay showed that the scaffold has no cytotoxicity against the L929 and HaCaT cells. The in-vitro wound healing potential of the scaffold by scratch wound assay on the L929 cell line showed 53.35 ± 2.3 %, 72.96 ± 2.2 %, and 50.89 ± 0.3 % wound closure for CS-P 200, CS-P 400 and CS-P 600, respectively when compared to native CS scaffold (38.86 ± 1.6 %). A similar observation was found with HaCaT cells too. The studies showed that the modified scaffold promotes collagen deposition from fibroblast cells. These findings suggest that scaffold cues remodel the wound microenvironment for a better wound-healing state, and the L-proline conjugated scaffold may have considerable potential as a wound dressing to improve wound healing.

Appraisal of anti-gout potential of colchicine-loaded chitosan nanoparticle gel in uric acid-induced gout animal model

Present study is aimed at transdermal delivery of colchicine-loaded chitosan nanoparticles. The nanoformulations were prepared utilising spontaneous emulsification method and optimised through 2³ factorial designs. The optimised formulation (CHNP-OPT) displayed an average particle size of 294 ± 3.75 nm, entrapment efficiency 92.89 ± 1.1% and drug content 83.45 ± 2.5%, respectively. In vitro release study demonstrated 89.34 ± 2.90% release over a period of 24 h. Further, CHNP-OPT incorporated into HPMC-E4M (hydroxypropyl methylcellulose) to form transdermal gel. CHNP_gel displayed 74.65 ± 1.90% permeation and stability over a period of 90 days. The anti-gout potential of CHNP_gel formulation was evaluated in vivo against monosodium urate (MSU) crystal-induced gout in animal model. There was significant reduction in uric acid level, during MSU administration, when compared with the conventional gel of colchicine. The enhanced therapeutic potential was witnessed through X-ray. The study revealed that colchicine-loaded CHNP_gel proved their supremacy over plain colchicine and can be an efficient delivery system for gout treatment.

Versatility of Hydrogels: From Synthetic Strategies, Classification, and Properties to Biomedical Applications

Hydrogels are three-dimensional, cross-linked, and supramolecular networks that can absorb significant volumes of water. Hydrogels are one of the most promising biomaterials in the biological and biomedical fields, thanks to their hydrophilic properties, biocompatibility, and wide therapeutic potential. Owing to their nontoxic nature and safe use, they are widely accepted for various biomedical applications such as wound dressing, controlled drug delivery, bone regeneration, tissue engineering, biosensors, and artificial contact lenses. Herein, this review comprises different synthetic strategies for hydrogels and their chemical/physical characteristics, and various analytical, optical, and spectroscopic tools for their characterization are discussed. A range of synthetic approaches is also covered for the synthesis and design of hydrogels. It will also cover biomedical applications such as bone regeneration, tissue engineering, and drug delivery. This review addressed the fundamental, general, and applied features of hydrogels in order to facilitate undergraduates, graduates, biomedical students, and researchers in a variety of domains.

Programmable Mechanically Active Hydrogel-Based Materials

Programmable mechanically active materials (MAMs) are defined as materials that can sense and transduce external stimuli into mechanical outputs or conversely that can detect mechanical stimuli and respond through an optical change or other change in the appearance of the material. Programmable MAMs are a subset of responsive materials and offer potential in next generation robotics and smart systems. This review specifically focuses on hydrogel-based MAMs because of their mechanical compliance, programmability, biocompatibility, and cost-efficiency. First, the composition of hydrogel MAMs along with the top-down and bottom-up approaches used for programming these materials are discussed. Next, the fundamental principles for engineering responsivity in MAMS, which includes optical, thermal, magnetic, electrical, chemical, and mechanical stimuli, are considered. Some advantages and disadvantages of different responsivities are compared. Then, to conclude, the emerging applications of hydrogel-based MAMs from recently published literature, as well as the future outlook of MAM studies, are summarized.

Hydrogels Classification According to the Physical or Chemical Interactions and as Stimuli-Sensitive Materials

Hydrogels are attractive biomaterials with favorable characteristics due to their water uptake capacity. However, hydrogel properties are determined by the cross-linking degree and nature, the tacticity, and the crystallinity of the polymer. These biomaterials can be sorted out according to the internal structure and by their response to external factors. In this case, the internal interaction can be reversible when the internal chains are led by physicochemical interactions. These physical hydrogels can be synthesized through several techniques such as crystallization, amphiphilic copolymers, charge interactions, hydrogen bonds, stereo-complexing, and protein interactions. In contrast, the internal interaction can be irreversible through covalent cross-linking. Synthesized hydrogels by chemical interactions present a high cross-linking density and are employed using graft copolymerization, reactive functional groups, and enzymatic methods. Moreover, specific smart hydrogels have also been denoted by their external response, pH, temperature, electric, light, and enzyme. This review deeply details the type of hydrogel, either the internal structure or the external response. Furthermore, we detail some of the main applications of these hydrogels in the biomedicine field, such as drug delivery systems, scaffolds for tissue engineering, actuators, biosensors, and many other applications.

A Review on the Design and Hydration Properties of Natural Polymer-Based Hydrogels

Hydrogels are hydrophilic 3D networks that are able to ingest large amounts of water or biological fluids, and are potential candidates for biosensors, drug delivery vectors, energy harvester devices, and carriers or matrices for cells in tissue engineering. Natural polymers, e.g., cellulose, chitosan and starch, have excellent properties that afford fabrication of advanced hydrogel materials for biomedical applications: biodegradability, biocompatibility, non-toxicity, hydrophilicity, thermal and chemical stability, and the high capacity for swelling induced by facile synthetic modification, among other physicochemical properties. Hydrogels require variable time to reach an equilibrium swelling due to the variable diffusion rates of water sorption, capillary action, and other modalities. In this study, the nature, transport kinetics, and the role of water in the formation and structural stability of various types of hydrogels comprised of natural polymers are reviewed. Since water is an integral part of hydrogels that constitute a substantive portion of its composition, there is a need to obtain an improved understanding of the role of hydration in the structure, degree of swelling and the mechanical stability of such biomaterial hydrogels. The capacity of the polymer chains to swell in an aqueous solvent can be expressed by the rubber elasticity theory and other thermodynamic contributions; whereas the rate of water diffusion can be driven either by concentration gradient or chemical potential. An overview of fabrication strategies for various types of hydrogels is presented as well as their responsiveness to external stimuli, along with their potential utility in diverse and novel applications. This review aims to shed light on the role of hydration to the structure and function of hydrogels. In turn, this review will further contribute to the development of advanced materials, such as "injectable hydrogels" and super-adsorbents for applications in the field of environmental science and biomedicine.

One Step e-Beam Radiation Cross-Linking of Quaternary Hydrogels Dressings Based on Chitosan-Poly(Vinyl-Pyrrolidone)-Poly(Ethylene Glycol)-Poly(Acrylic Acid)

We report on the successful preparation of wet dressings hydrogels based on Chitosan-Poly(N-Vinyl-Pyrrolidone)-Poly(ethylene glycol)-Poly(acrylic acid) and Poly(ethylene oxide) by e-beam cross-linking in weakly acidic media, to be used for rapid healing and pain release of infected skin wounds. The structure and compositions of hydrogels investigated according to sol-gel and swelling studies, network parameters, as well as FTIR and XPS analyses showed the efficient interaction of the hydrogel components upon irradiation, maintaining the bonding environment while the cross-linking degree increasing with the irradiation dose and the formation of a structure with the mesh size in the range 11–67 nm. Hydrogels with gel fraction above 85% and the best swelling properties in different pH solutions were obtained for hydrogels produced with 15 kGy. The hydrogels are stable in the simulated physiological condition of an infected wound and show appropriate moisture retention capability and the water vapor transmission rate up to 272.67 g m⁻² day⁻¹, to ensure fast healing. The hydrogels proved to have a significant loading capacity of ibuprofen (IBU), being able to incorporate a therapeutic dose for the treatment of severe pains. Simultaneously, IBU was released up to 25% in the first 2h, having a release maximum after 8 h.

In vitro evaluation of the hyaluronic acid/alginate composite powder for topical haemostasis and wound healing

The use of haemostatic agents can provide life-saving treatment for patients who suffer from massive bleeding in both prehospital and intraoperative conditions. However, there are still urgent demands for novel haemostatic materials that exhibit better haemostatic activity, biocompatibility, and biodegradability than existing products. In the present study, we aim to evaluate the feasibility of new wound dressing, RapidClot, for treating uncontrolled haemorrhage through a series of in vitro assessments to determine the swelling ratio, clotting time, enzymatic degradation, haemolytic activity, cytotoxicity, cell proliferation, and migration. The results indicated that the RapidClot revealed better water adsorption capacity and shorter blood clotting time (132.7 seconds) than two commercially available haemostatic agents Celox (378.7 seconds) and WoundSeal (705.3 seconds). Additionally, the RapidClot dressing exhibited a similar level of degradability in the presence of hyaluronidase and lysozyme as that of Celox, whereas negligible degradation of WoundSeal was obtained. Although both Celox and RapidClot revealed a similar level in cell viability (above than 90%) against NIH/3 T3 fibroblasts, improved cell proliferation and migration could be obtained in RapidClot. Taking together, our results demonstrated that RapidClot could possess a great potential for serving as an efficient healing dressing with haemorrhage control ability.

3D-macroporous chitosan-based scaffolds with in situ formed Pd and Pt nanoparticles for nitrophenol reduction

3D-macroporous chitosan-based scaffolds (cryogels) were produced via growth of metal-polymer coordinated complexes and electrostatic interactions between oppositely charged groups of chitosan and metal ions under subzero temperatures. A mechanism of reduction of noble metal complexes inside the cryogel walls by glutaraldehyde is proposed, which produces discrete and dispersed noble metal nanoparticles. 3D-macroporous scaffolds prepared under different conditions were characterised using TGA, FTIR, nitrogen adsorption, SEM, EDX and TEM, and the distribution of platinum nanoparticles (PtNPs) and palladium nanoparticles (PdNPs) in the material assessed. The catalytic activity of the in situ synthesised PdNPs, at 2.6, 12.5 and 21.0 μg total mass, respectively, was studied utilising a model system of 4-nitrophenol reduction. The kinetics of the reaction under different conditions (temperature, concentration of catalyst) were examined, and a decrease of catalytic activity was not observed over 17 treatment cycles. Increasing the temperature of the catalytic reaction from 10 to 22 and 35 °C by PdNPs supported within the cryogel increased the kinetic rate by 44 and 126%, respectively. Turnover number and turnover frequency of the PdNPs catalysts at room temperature were in the range 0.20-0.53 h^-1. The conversion degree of 4-nitrophenol at room temperature reached 98.9% (21.0 μg PdNPs). Significantly less mass of palladium nanoparticles (by 30-40 times) was needed compared to published data to obtain comparable rates of reduction of 4-nitrophenol.

Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine

Electrospinning has been used for decades to generate nano-fibres via an electrically charged jet of polymer solution. This process is established on a spinning technique, using electrostatic forces to produce fine fibres from polymer solutions. Amongst, the electrospinning of available biopolymers (silk, cellulose, collagen, gelatine and hyaluronic acid), chitosan (CH) has shown a favourable outcome for tissue regeneration applications. The aim of the current review is to assess the current literature about electrospinning chitosan and its composite formulations for creating fibres in combination with other natural polymers to be employed in tissue engineering. In addition, various polymers blended with chitosan for electrospinning have been discussed in terms of their potential biomedical applications. The review shows that evidence exists in support of the favourable properties and biocompatibility of chitosan electrospun composite biomaterials for a range of applications. However, further research and in vivo studies are required to translate these materials from the laboratory to clinical applications.

Study of the controlled assembly of DNA gated PEI/Chitosan/SiO2 fluorescent sensor

In this paper, polyethylenimine (PEI) and Chitosan were simultaneously one-step doped into silicon dioxide (SiO₂ ) nanoparticles to synthesize PEI/Chitosan/SiO₂ composite nanoparticles. The polymer PEI contained a large amount of amino groups, which can realize the amino functionalized SiO₂ nanoparticles. And, the good pore forming effect of Chitosan was introduced into SiO₂ nanoparticles, and the resulting composite nanoparticles also had a porous structure. In pH 7.4 phosphate buffer solution (PBS), the amino groups of PEI had positive charges, and therefore the fluorescein sodium dye molecule can be loaded into the channels of PEI/Chitosan/SiO₂ composite nanoparticles by electrostatic adsorption. Furthermore, utilizing the diversity of DNA molecular conformation, we designed a high sensitive controllable assembly of DNA gated fluorescent sensor based on PEI/Chitosan/SiO₂ composite nanoparticles as loading materials. The factors affecting the sensing performance of the sensor were investigated, and the sensing mechanism was also further studied.

Potential of electrospun chitosan fibers as a surface layer in functionally graded GTR membrane for periodontal regeneration

OBJECTIVE

The regeneration of periodontal tissues lost as a consequence of destructive periodontal disease remains a challenge for clinicians. Guided tissue regeneration (GTR) has emerged as the most widely practiced regenerative procedure. Aim of this study was to electrospin chitosan (CH) membranes with a low or high degree of fiber orientation and examines their suitability for use as a surface layer in GTR membranes, which can ease integration with the periodontal tissue by controlling the direction of cell growth.

METHODS

A solution of CH-doped with polyethylene oxide (PEO) (ratio 95:5) was prepared for electrospinning. Characterization was performed for biophysiochemical and mechanical properties by means of scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy, swelling ratio, tensile testing and monitoring degradation using pH analysis, weight profile, ultraviolet-visible (UV-vis) spectroscopy and FTIR analysis. Obtained fibers were also assessed for viability and matrix deposition using human osteosarcoma (MG63) and human embryonic stem cell-derived mesenchymal progenitor (hES-MP) cells.

RESULTS

Random and aligned CH fibers were obtained. FTIR analysis showed neat CH spectral profile before and after electrospinning. Electropsun mats were conducive to cellular attachment and viability increased with time. The fibers supported matrix deposition by hES-MPs. Histological sections showed cellular infiltration as well.

SIGNIFICANCE

The surface layer would act as seal to prevent junctional epithelium from falling into the defect site and hence maintain space for bone regeneration.

Molecular Dynamics of a Water-Absorbent Nanoscale Material Based on Chitosan

Although hydrogels have been widely investigated for their use in materials science, nanotechnology, and novel pharmaceuticals, mechanistic details explaining their water-absorbent features are not well understood. We performed an all-atom molecular dynamics study of the structural transformation of chitosan nanohydrogels due to water absorption. We analyzed the conformation of dry, nanoscaled chitosan, the structural modifications that emerge during the process of water inclusion, and the dynamics of this biopolymer in the presence of nature's solvent. Two sets of nanoscaled, single-chained chitosan models were simulated: one to study the swelling dependence upon the degree of self-cross-linking and other to observe the response with respect to the degree of protonation. We verified that nanohydrogels keep their ability to absorb water and grow, regardless of their degree of cross-linking. Noteworthy, we found that the swelling behavior of nanoscaled chitosan is pH-dependent, and it is considerably more limited than that of larger scale hydrogels. Thus, our study suggests that properties of nanohydrogels are significantly different from those of larger hydrogels. These findings might be important in the design of novel controlled-release and targeted drug-delivery systems based on chitosan.

Chitosan-folate coated mesoporous silica nanoparticles as a smart and pH-sensitive system for curcumin delivery

Biocompatible pH and folate sensitive large pore MSNs with controllable and targeted CUR delivery.

Graft Copolymerization of Chitosan with L-Lactide under Microwave Irradiation

Poly (L-lactide) was grafted onto chitosan by ring-opening copolymerization under microwave irradiation in the presence of tin octoate (Sn (Oct)2) as catalyst. The chemical structure and physical properties of the copolymers with different feeding ratios were discussed by FTIR, DTG and X-RD, taking pure chitosan as reference. The results showed that the application of microwave irradiation in the reaction could achieve the copolymer with high grafting percentage in a short time and low temperature. The thermal stability and crystallinity were decreased with the feeding ratio increasing, attributing to the increasing of grafting percentage.

PLA architectures: the role of branching

Biobased and biodegradable polymers have become more and more interesting in view of waste management and crude oil depletion.

Development of tannic acid/chitosan/pullulan composite nanofibers from aqueous solution for potential applications as wound dressing

This study presents the successful development of biocompatible tannic acid (TA)/chitosan (CS)/pullulan (PL) composite nanofibers (NFs) with synergistic antibacterial activity against the Gram-negative bacteria Escherichia coli. The NFs were developed utilizing the forcespinning(®) (FS) technique from CS-CA aqueous solutions to avoid the usage of toxic organic solvents. The ternary nanofibrous membranes were crosslinked to become water stable for potential applications as wound dressing. The morphology, structure, water solubility, water absorption capability and thermal properties of the NFs were characterized. The ternary composite membrane exhibits good water absorption ability with rapid uptake rate. This novel membrane favors fibroblast cell attachment and growth by providing a 3D environment which mimics the extracellular matrix (ECM) in skin and allows cells to move through the fibrous structure resulting in interlayer growth throughout the membrane, thus favoring potential for deep and intricate wound healing.

Thermal preparation of chitosan-acrylic acid superabsorbent: optimization, characteristic and water absorbency

Chitosan-acrylic acid superabsorbent polymer was successfully prepared by the thermal reaction without using initiator and crosslinker in air. The effects of some reaction variables on the water absorbency of this polymer were investigated by orthogonal tests, and the optimal conditions were described. The influences of temperature, time, ratio of the reactants and neutralization degree of acrylic acid on the reaction were further studied. These polymers were also prepared in nitrogen atmosphere and by using a radical initiator and compared against thermal reaction obtained polymers. The structures of the polymers were characterized by FT-IR, TGA, XRD, (13)C NMR and elemental analyses. The results showed that the thermal reaction product of acrylic acid with chitosan might form N-carboxyethyl grafted and amide-linked polymer and this product could absorb water 644 times its own dry weight. The possible mechanism for the thermal reaction was further suggested. The purpose of this research was to explore the friendly synthesized method of the superabsorbent.

Preparation of biocompatible chitosan grafted poly(lactic acid) nanoparticles

Chitosan grafted poly(lactic acid) (CS-g-PLA) copolymer was synthesized and characterized by FT-IR and elemental analysis. The degree of poly(lactic acid) substitution on chitosan was 1.90 ± 0.04%. The critical aggregation concentration of CS-g-PLA in distilled water was 0.17 mg/ml. Three methods of preparing CS-g-PLA nanoparticles (diafiltration method, ultrasonication method and diafiltration combined with ultrasonication method) were investigated and their effect was compared. Of the three methods, diafiltration combined with ultrasonication method produced nanoparticles with optimal property in terms of size and morphology, with size ranging from 133 to 352 nm and zeta potential from 36 to 43 mV. Also, the hemolytic activity and cytotoxicity of the CS-g-PLA based nanoparticles was tested, and results showed low hemolysis rate (<5%) and no significant cytotoxicity effect of these nanoparticles.

Polysaccharide-modified synthetic polymeric biomaterials

This review presents an overview of polysaccharide-conjugated synthetic polymers and their use in tissue-engineered scaffolds and drug-delivery applications. This topic will be divided into four categories: (1) polymeric materials modified with non-mammalian polysaccharides such as alginate, chitin, and dextran; (2) polymers modified with mammalian polysaccharides such as hyaluronan, chondroitin sulfate, and heparin; (3) multi-polysaccharide-derivatized polymer conjugate systems; and (4) polymers containing polysaccharide-mimetic molecules. Each section will discuss relevant conjugation techniques, analysis, and the impact of these materials as micelles, particles, or hydrogels used in in-vitro and in-vivo biomaterial applications.

Biodegradable 'intelligent' materials in response to chemical stimuli for biomedical applications

BACKGROUND

Biodegradable stimuli-responsive materials, which exhibit large and sharp physical-chemical changes in response to small physical or chemical stimuli, are attracting increasing interests because of their potential applications in biomedical fields, such as transient implants, drug delivery carriers, and tissue engineering scaffolds. Our previous review (see page 493 of issue 4) summarized those biodegradable 'intelligent' materials that respond to physical stimuli, such as temperature, ultrasound, and magnetic field. Biodegradable 'intelligent' materials that could respond to chemical stimuli, such as pH and specific molecules, have also been studied intensively and significant progress in this field has been achieved. As a single stimulus-responsive property would limit practical application, multi-stimuli-responsive materials are receiving increasing interest and considerable attention.

OBJECTIVE/METHODS

This review summarizes the development of biodegradable 'intelligent' materials in response to chemical stimuli and to dual stimuli; their potential biomedical applications are also introduced. A detailed analysis of publications and patents on such materials in recent years is presented.

RESULTS/CONCLUSION

Most of biodegradable stimuli-responsive materials are currently still at a developmental research stage. Further work is required to improve the responsive properties between the materials and the biological environments, so that the clinical applicability of such devices could be successful. We hope that our review will be helpful in the future development of new stimuli-responsive biodegradable polymers or polymeric systems that can be used reliably in real-life applications.