Degradation potential of biological tissues fixed with various fixatives: an in vitro study

Chitosan Cryogels Cross-Linked with 1,1,3-Triglycidyloxypropane: Mechanical Properties and Cytotoxicity for Cancer Cell 3D Cultures

Here, we have presented a new method of 1,1,3-triglycidyloxypropane (TGP) synthesis and investigated how cross-linker branching affects mechanical properties and cytotoxicity of chitosan scaffolds in comparison with those cross-linked using diglycidyl ethers of 1,4-butandiol (BDDGE) and poly(ethylene glycol) (PEGDGE). We have demonstrated that TGP is an efficient cross-linker for chitosan at a subzero temperature at TGP:chitosan molar ratios from 1:1 to 1:20. Although the elasticity of chitosan scaffolds increased in the following order of the cross-linkers PEGDGE > TGP > BDDGE, TGP provided cryogels with the highest compressive strength. Chitosan-TGP cryogels have shown low cytotoxicity for colorectal cancer HCT 116 cell line and supported the formation of 3D multicellular structures of the spherical shape and size up to 200 µm, while in more brittle chitosan-BDDGE cryogel this cell culture formed epithelia-like sheets. Hence, the selection of the cross-linker type and concentration for chitosan scaffold fabrication can be used to mimic the solid tumor microenvironment of certain human tissue, control matrix-driven changes in the morphology of cancer cell aggregates, and facilitate long-term experiments with 3D tumor cell cultures.

The hybrid crosslinking method improved the stability and anti-calcification properties of the bioprosthetic heart valves

The bioprosthetic heart valves (BHVs) are the best option for the treatment of valvular heart disease. Glutaraldehyde (Glut) is commonly used as the golden standard reagent for the crosslinking of BHVs. However, the obvious defects of Glut, including residual aldehyde toxicity, degradation and calcification, increase the probability of valve failure in vivo and motivated the exploration of alternatives. Thus, the aim of this study is to develop a non-glutaraldehyde hybrid cross-linking method composed of Neomycin Trisulfate, Polyethylene glycol diglycidyl ether and Tannic acid as a substitute for Glut, which was proven to reduce calcification, degradation, inflammation of the biomaterial. Evaluations of the crosslinked bovine pericardial included histological and ultrastructural characterization, biomechanical performance, biocompatibility and structural stability test, and in vivo anti-inflammation and anti-calcification assay by subcutaneous implantation in juvenile Sprague Dawley rats. The results revealed that the hybrid crosslinked bovine pericardial were superior to Glut crosslinked biomaterial in terms of better hydrophilicity, thermodynamics stability, hemocompatibility and cytocompatibility, higher Young’s Modulus, better stability and resistance to enzymatic hydrolysis, and lower inflammation, degradation and calcification levels in subcutaneous implants. Considering all above performances, it indicates that the hybrid cross-linking method is appropriate to replace Glut as the method for BHV preparation, and particularly this hybrid crosslinked biomaterials may be a promising candidate for next-generation BHVs.

Advances on the modification and biomedical applications of acellular dermal matrices

Acellular dermal matrix (ADM) is derived from natural skin by removing the entire epidermis and the cell components of dermis, but retaining the collagen components of dermis. It can be used as a therapeutic alternative to “gold standard” tissue grafts and has been widely used in many surgical fields, since it possesses affluent predominant physicochemical and biological characteristics that have attracted the attention of researchers. Herein, the basic science of biologics with a focus on ADMs is comprehensively described, the modification principles and technologies of ADM are discussed, and the characteristics of ADMs and the evidence behind their use for a variety of reconstructive and prosthetic purposes are reviewed. In addition, the advances in biomedical applications of ADMs and the common indications for use in reconstructing and repairing wounds, maintaining homeostasis in the filling of a tissue defect, guiding tissue regeneration, and delivering cells via grafts in surgical applications are thoroughly analyzed. This review expectedly promotes and inspires the emergence of natural raw collagen-based materials as an advanced substitute biomaterial to autologous tissue transplantation.

Graphical Abstract

Cytotoxicity of Xenogeneic Pericardium Preserved by Epoxy Cross-Linking Agents

The aim of the study was to assess the cytotoxic effect of xenopericardial biomaterial treated with di- and pentaepoxides on the cell cultures in vitro.

Materials and Methods

Samples of bovine and porcine pericardium were used in the work. Three different modes were employed for preservation: 1) 0.625% solution of glutaraldehyde (GA) and a two-fold change on days 2 and 7; 2) 5% solution of ethylene glycol diglycidyl ether (EGDE) changed on day 2; 3) 5% EGDE solution for 10 days, then 2% pentaepoxide solution also for 10 days. The cytotoxicity of the biomaterial was assessed by the extraction method. To determine the cytotoxicity of the biomaterial, EA.hy926 cells, multipotent mesenchymal stem cells (MMSCs), and fibroblasts were used. Cell viability was determined by the MTT test. The level of apoptosis and necrosis in the cell cultures was assessed by staining with acridine orange and ethidium bromide after cultivation with xenopericardial extracts employing different modes of preservation.

Results

Extracts of bovine and porcine pericardium preserved with GA have been found to have the greatest toxic effect on the cell cultures showing 20-33% reduction of cell viability. Extracts from bovine and porcine pericardium preserved with di- and pentaepoxy compounds do not have a toxic effect on endothelial cells, MMSCs, and fibroblasts since cell viability reduction is by no more than 15%. The lowest level of apoptosis and necrosis is observed in the cell cultures under the influence of extracts from the pericardium, preserved with diepoxide and pentaepoxide compounds.

Conclusion

According to the MTT test for cytotoxicity and determination of the level of apoptosis and necrosis in cell cultures, bovine and porcine pericardia treated with di- and pentaepoxides have been established to have no cytotoxic effect on the culture of endothelial EA.hy926 cells, MMSCs, fibroblasts in vitro, whereas GA, in comparison with di- and pentaepoxides, has a toxic impact on the cells.

Poly(ethylene glycol)-Based Coatings for Bioprosthetic Valve Tissues: Toward Restoration of Physiological Behavior

Bioprosthetic valves (BPVs) have a limited lifespan in the body necessitating repeated surgeries to replace the failed implant. Early failure of these implants has been linked to various surface properties of the valve. Surface properties of BPVs are significantly different from physiological valves because of the fixation process used when processing the xenograft tissue. To improve the longevity of BPVs, efforts need to be taken to improve the surface properties and shield the implant from the bodily interactions that degrade it. Toward this goal, we evaluated the use of hydrogel coatings to attach to the BPV tissue and impart surface properties that are close to physiological. Hydrogels are well characterized for their biocompatibility and highly tunable surface characteristics. Using a previously published coating method, we deposited hydrogel coatings of poly(ethylene glycol)diacrylate (PEGDA) and poly(ethylene glycol)diacrylamide (PEGDAA) atop BPV samples. Coated samples were evaluated against the physiological tissue and uncoated glutaraldehyde-fixed tissue for deposition of hydrogel, surface adherence, mechanical properties, and fixation properties. Results showed both PEGDA- and PEGDAA-deposited coatings were nearly continuous across the valve leaflet surface. Further, the PEGDA- and PEGDAA-coated samples showed restoration of physiological levels of protein adhesion and mechanical stiffness. Interestingly, the coating process rather than the coating itself altered the material behavior yet did not alter the cross-linking from fixation. These results show that the PEG-based coatings for BPVs can successfully alter surface properties of BPVs and help promote physiological characteristics without interfering with the necessary fixation.

Cross-linking method using pentaepoxide for improving bovine and porcine bioprosthetic pericardia: A multiparametric assessment study

Bioprosthetic heart valves made from bovine pericardium (BP) and porcine pericardium (PP) preserved with glutaraldehyde (GA) are commonly used in valve surgeries but prone to calcification in many patients. In this study, we compared BP and PP preserved with GA, ethylene glycol diglycidyl ether (DE), and 1,2,3,4,6-penta-O-{1-[2-(glycidyloxy)ethoxy]ethyl}-d-glucopyranose (PE). We studied the stabilities of DE and PE in preservation media along with the amino acid (AA) compositions, Fourier-transform infrared spectra, mechanical properties, surface morphologies, thermal stability, calcification, and the cytocompatibility of BP and PP treated with 0.625% GA, 5% DE, 2% PE, and alternating 5% DE and 2% PE for 3 + 11 d and 10 + 10 d, respectively. Both epoxides were stable in the water-buffer solutions (pH 7.4). DE provided high linkage densities in BP and PP owing to reactions with Hyl, Lys, His, Arg, Ser, and Tyr. PE reacted weakly with these AAs but strongly with Met. High cross-linking density obtained using the 10 d + 10 d method provided satisfactory thermal stability of biomaterials. The epoxy preservations improved cytocompatibility and resistance to calcification. PE enhanced the stress/strain properties of the xenogeneic pericardia, perhaps by forming nanostructures that were clearly visualised in BP using scanning electron microscopy. The DE + PE combination, in an alternating cross-linking manner, thus constitutes a promising option for developing bioprosthetic pericardia.

Quasi-isothermal modulated DSC as a valuable characterisation method for soft tissue biomaterial crosslinking reactions

Glutaraldehyde (Glut) is an extensively used sterilant and fixative for the crosslinking of natural soft tissue biomaterials like bovine pericardium (BP) to provide stability and is required for its application in vivo. There is plenty of debate around the reaction mechanism of Glut with natural biomaterials. Differential scanning calorimetry (DSC) is a commonly used technique that is typically used to measure the thermal profile of polymers. However, a variation known as quasi-isothermal modulated differential scanning calorimetry (QiMDSC) has been utilised for the analysis of polymorphic transformations in both the pharmaceutical and food industries. This communication will address QiMDSC as a method for analysing soft tissue biomaterials and their crosslinking mechanisms and how it can be applied to other biomaterial applications.

Interfacial Coating Method for Amine-Rich Surfaces using Poly(ethylene glycol) Diacrylate Applied to Bioprosthetic Valve Tissue Models

Bioprosthetic heart valve implants are beset by calcification and failure due to the interactions between the body and the transplant. Hydrogels can be used as biological blank slates that may help to shield implants from these interactions; however, traditional light-based hydrogel polymerization is impeded by tissue opacity and topography. Therefore, new methods must be created to bind hydrogel to implant tissues. To address these complications, a two-step surface-coating method for bioprosthetic valves was developed. A previously developed bioprosthetic valve model (VM) was used to investigate and optimize the coating method. Generally, this coating is achieved by first reacting surface amine groups with an NHS-PEG-acrylate while also allowing glucose to absorb into the bulk. Then, glucose oxidase, poly(ethylene glycol) diacrylate (PEGDA), and iron ions are added to the system to initiate free-radical polymerization that bonds the PEGDA hydrogel to the acrylates sites on the surface. Results showed a thin (∼8 μm), continuous coating on VM samples that is capable of repelling protein adhesion (2% surface fouling versus 20% on uncoated samples) and does not significantly affect the surface mechanical properties. Based on this success, the coating method was translated to glutaraldehyde-fixed valve tissue samples. Results showed noncontinuous but evident coating on the surface, which was further improved by adjusting the coating solution. These results demonstrate the feasibility of the proposed two-step surface coating method for modifying the surface of bioprosthetic valve replacements.

Development and characterization of bladder acellular matrix cross-linked by dialdehyde carboxymethyl cellulose for bladder tissue engineering

In order to address the disadvantage of rapid degradation and serious immune response of bladder acellular matrix (BAM) tissues in clinical application, in this study, oxidized carboxymethyl cellulose (DCMC) was developed to replace glutaraldehyde (GA), a most common synthetic crosslinking reagent in clinical practice, to fix BAM tissues for lower cytotoxicity. The aim of this work was to evaluate feasibility of DCMC as a crosslinking reagent for BAM fixation and developing DCMC fixed-BAM (D-BAM) tissues for tissue engineering. For the preparation of DCMC, the results showed that when DCMC was prepared using a specific concentration of sodium periodate solution (the mass ratio of NaIO4/CMC is 1 : 1) and a specific reaction time (4 hours), its cytotoxicity was the lowest and its fixation effect was better. The critical crosslinking characteristics and cytocompatibility of optimum D-BAM tissues were also investigated. The results demonstrated that DCMC-fixation (especially 30 mg ml-1 DCMC-fixation) not only formed stable cross-linking bonds but also preserved well the original ultrastructure of the BAM tissues, which simultaneously increased the mechanical strength and capacity of the enzymatic hydrolytic resistance. The DCMC-fixation could also reduce the expression of α-Gal in BAM tissues and preserve the useful growth factors such as GAGs, KGF and TGF-β in bladder tissues. In addition, 30 mg ml-1 D-BAM tissues had excellent cytocompatibility. Moreover, it could stimulate the secretion of PDGF and EGF from seeded bladder transitional epithelial cells (BTECs), which is a critical feature for further re-epithelialization. Its anti-calcification ability was also prominent, which is necessary in bladder repair. The present studies demonstrated that DCMC could be a potential biological crosslinking agent for BAM fixation due to its excellent crosslinking effects, and the D-BAM tissues were suitable to be used as a substitute for the bladder due to their resistance to enzymatic degradation, anticalcification and cytocompatibility.

A tissue-mimetic nano-fibrillar hybrid injectable hydrogel for potential soft tissue engineering applications

While collagen type I (Col-I) is commonly used as a structural component of biomaterials, collagen type III (Col-III), another fibril forming collagen ubiquitous in many soft tissues, has not previously been used. In the present study, the novel concept of an injectable hydrogel with semi-interpenetrating polymeric networks of heterotypic collagen fibrils, with tissue-specific Col-III to Col-I ratios, in a glycol-chitosan matrix was investigated. Col-III was introduced as a component of the novel hydrogel, inspired by its co-presence with Col-I in many soft tissues, its influence on the Col-I fibrillogenesis in terms of diameter and mechanics, and its established role in regulating scar formation. The hydrogel has a nano-fibrillar porous structure, and is mechanically stable under continuous dynamic stimulation. It was found to provide a longer half-life of about 35 days than similar hyaluronic acid-based hydrogels, and to support cell implantation in terms of viability, metabolic activity, adhesion and migration. The specific case of pure Col-III fibrils in a glycol-chitosan matrix was investigated. The proposed hydrogels meet many essential requirements for soft tissue engineering applications, particularly for mechanically challenged tissues such as vocal folds and heart valves.

Accelerating effects of genipin-crosslinked small intestinal submucosa for defected gastric mucosa repair

Slow healing of gastric mucosa defects caused by endoscopic surgery is a common but severe clinical problem for lack of an effective treatment. Small intestinal submucosa (SIS) is a bio-derived extracellular matrix scaffold with remarkable repairing ability for soft tissue, but its rapid degradation and poor mechanical properties in the stomach environment limit its application for gastric mucosa regeneration. Herein, we modified SIS by genipin, a natural crosslinking agent, to improve its resistance against degradation in gastric juice and to promote the healing of gastric mucosa defects. The crosslinking characteristics of genipin-crosslinked SIS (GP-CR SIS) were evaluated by crosslinking degree, swelling ratio and FITR, respectively. GP-CR SIS was highly resistant to gastric juice digestion and had a great improvement in mechanical properties. Additionally, GP-CR SIS maintained excellent biocompatibility according to a cytotoxicity test, hemolysis test, and rat subcutaneous implant assay. In an in vivo study, we treated defected gastric mucosa with GP-CR SIS in a rabbit endoscopic submucosal dissection (ESD)-related ulcer model. After two weeks of surgical treatment, GP-CR SIS significantly expedited wound closure and ameliorated newly constructed tissue by providing a protective microenvironment for rapid granulation tissue formation and accelerating angiogenesis/re-epithelialization. In conclusion, this study demonstrates the huge therapeutic potential of GP-CR SIS scaffolds for accelerating defected gastric mucosa regeneration.

Biocompatibility and degradation of tendon-derived scaffolds

Decellularized extracellular matrix has often been used as a biomaterial for tissue engineering applications. Its function, once implanted can be crucial to determining whether a tissue engineered construct will be successful, both in terms of how the material breaks down, and how the body reacts to the material's presence in the first place. Collagen is one of the primary components of extracellular matrix and has been used for a number of biomedical applications. Scaffolds comprised of highly aligned collagen fibrils can be fabricated directly from decellularized tendon using a slicing, stacking, and rolling technique, to create two- and three-dimensional constructs. Here, the degradation characteristics of the material are evaluated in vitro, showing that chemical crosslinking can reduce degradation while maintaining fiber structure. In vivo, non-crosslinked and crosslinked samples are implanted, and their biological response and degradation evaluated through histological sectioning, trichrome staining, and immunohistochemical staining for macrophages. Non-crosslinked samples are rapidly degraded and lose fiber morphology while crosslinked samples retain both macroscopic structure as well as fiber orientation. The cellular response of both materials is also investigated. The in vivo response demonstrates that the decellularized tendon material is biocompatible, biodegradable and can be crosslinked to maintain surface features for extended periods of time in vivo. This study provides material characteristics for the use of decellularized tendon as biomaterial for tissue engineering.

Reinforced pericardium as a hybrid material for cardiovascular applications

Pericardium-based cardiovascular devices are currently bound by a 10-year maximum lifetime due to detrimental calcification and degradation. The goal of this work is to develop a novel synthetic material to create a lasting replacement for malfunctioning or diseased tissue in the cardiovascular system. This study couples poly(propylene fumarate) (PPF) and a natural biomaterial together in an unprecedented hybrid composite and evaluates the composite versus the standard glutaraldehyde-treated tissue. The polymer reinforcement is hypothesized to provide initial physical protection from proteolytic enzymes and degradation, but leave the original collagen and elastin matrix unaltered. The calcification rate and durability of the hybrid material are evaluated in vitro and in an in vivo subdermal animal model. Results demonstrate that PPF is an effective support and leads to significantly less calcium deposition, important metrics when evaluating cardiovascular material. By avoiding chemical crosslinking of the tissue and associated side effects, PPF-reinforced pericardium as a biohybrid material offers a promising potential direction for further development in cardiovascular material alternatives. Eliminating the basis for the majority of cardiovascular prosthetic failures could revolutionize expectations for extent of cardiovascular repair.

A comparative study on mechanical and biochemical properties of bovine pericardium after single or double crosslinking treatment

BACKGROUND AND OBJECTIVES

Glutaraldehyde (GA) has been used as a representative method of tissue preservation in cardiovascular surgery. However, GA has showed limited durability including calcification, mechanical failure and toxicity. To overcome those unsolved problems, we analyzed the crosslinking differences of primary amines, GA and genipin in their mechanical and biochemical properties with a single or double crosslinking agent for clinical application.

MATERIALS AND METHODS

Samples were divided into 3 groups; control, single crosslinking fixation and double crosslinking fixation after decellurarization using bovine pericardium. For analysis of the biochemical and mechanical properties of each crosslinking method, tensile strength, percentage strain, thermal stability, resistance to pronase, nynhydrin and cytotoxicity test were studied.

RESULTS

Combined hexamethylene diamine and suberic acid in the carbodiimide hydrochloride/N-hydroxysucinimide solution (EDC/NHS) after decellurarization, tensile strength and strain percentage were not statistically significant compared to the single crosslinking treated groups (p>0.05). Tissue crosslinking stability was weak in single treatment of diphenylphosphoryl azide, suberic acid, low concentration of EDC, hexamethylene diamine and procyanidin groups, but thermal stability and resistance to the pronase and ninhydrin were markedly increased in concentrated EDC/NHS or after combined double treatment with low concentration of GA or genipin (p<0.001).

CONCLUSION

Single or double crosslinking with low concentration of carbodiimide, diphenylphosphonyl azide, procyanidin, suberic acid and hexane diamine were not as effective in mechanical, biochemical, cytotoxic and crosslinking properties compared to GA or genipin fixation, but their mechanical and chemical properties were much improved when combined with low concentrations of GA or genipin in the double crosslinking process.

Shearwave dispersion ultrasound vibrometry (SDUV) on swine kidney

Shearwave dispersion ultrasound vibrometry (SDUV) is used to quantify both tissue shear elasticity and shear viscosity by evaluating dispersion of shear wave propagation speed over a certain bandwidth (50 to 500 Hz). The motivation for developing elasticity imaging techniques is the desire to diagnose disease processes. However, it is important to study the mechanical properties of healthy tissues; such data can enhance clinical knowledge and improve understanding of the mechanical properties of tissue. The purpose of this study is to evaluate the feasibility of using SDUV for in vitro measurements of renal cortex shear elasticity and shear viscosity in healthy swine kidneys. Eight excised kidneys from female pigs were used in these in vitro experiments and a battery of tests was performed to gain insight into the material proper ties of the renal cortex. In these 8 kidneys, the overall renal cortex elasticity and viscosity were 1.81 ± 0.17 kPa and 1.48 ± 0.49 Pa-s, respectively. In an analysis of the material properties over time after excision, there was not a statistically significant difference in shear elasticity over a 24-h period, but a statistically significant difference in shear viscosity was found. Homogeneity of the renal cortex was examined and it was found that shear elasticity and shear viscosity were statistically different within a kidney, suggesting global tissue inhomogeneity. In creases of more than 30% in shear elasticity and shear viscosity were observed after immersion in 10% formaldehyde. Finally, it was found that the renal cortex is rather anisotropic. Two values for shear elasticity and shear viscosity were measured depending on shear wave propagation direction. These various tests elucidated different aspects of the material properties and the structure of the ex vivo renal cortex.

Preparation and characterization of a thermostable and biodegradable biopolymers using natural cross-linker

The present study describes preparation and characterization of a thermally stable and biodegradable biopolymer using collagen and a natural polymer, alginic acid (AA). Required concentration of alginic acid and collagen was optimized and the resulting biopolymer was characterized for, degree of cross-linking, mechanical strength, thermal stability, biocompatibility (toxicity) and biodegradability. Results reveal, the degree of cross-linking of alginic acid (at 1.5% concentration) with collagen was calculated as 75%, whereas it was 83% with standard cross-linking agent, glutaraldehyde (at 1.5% concentration). The AA cross-linked biopolymer was stable up to 245°C and Exhibits 5-6-fold increase in mechanical (tensile) strength compared to plain collagen (native) materials. However, glutaraldehyde cross-linked material exhibits comparatively less thermal stability and brittle in nature (low tensile strength). With regard to cell toxicity, no cytotoxicity was observed for AA cross-linked material when tested with mesenchymal cells and found degradable when treated with collagenase enzyme. The nature of bonding pattern and the reason for thermal stability of AA cross-linked collagen biopolymer was discussed in detail with the help of bioinformatics. A supplementary file on efficacy of AACC as a wound dressing material is demonstrated in detail with animal model studies.

Biotribological investigation of a multi-tube foot for traction generation in a medical microrobot

In recent years, efforts to develop microrobots for medical applications have been expanding. One of the key design issues in such microrobots is to attain adequate frictional interaction between the robotic foot and the organ tissue. In particular, it is important to generate the necessary frictional force without damaging the tissue. In this work, a design for the robotic foot was proposed on the basis of the frictional behaviour of a tube structure. Fundamental experiments were initially performed to understand the biotribological behaviour of the tube and rod structures. The design was then modified to a multi-tube structure to achieve adequate frictional behaviour. Biotribological investigation of a multi-tube foot in contact with a small intestine specimen of a pig was conducted using a pin-on-reciprocator type biotribotester. It was found that there is an optimum number and arrangement of the tubes for generating high frictional force. Experimental results showed that a nine-tube foot had the highest initial friction coefficient of about 1.5. The major frictional mechanism was determined to be interlocking between the tubes and the surface structures of the intestine specimen. The results of this work will aid the optimum design of frictional surface for medical microrobots and other biological devices.

Effects of laser irradiation on collagen organization in chemically induced degenerative annulus fibrosus of lumbar intervertebral disc

BACKGROUND AND OBJECTIVE

The number of in vitro experimental studies was carried out with the use of intact tissues to establish a mechanism of laser-tissue interaction. However, in the process of degeneration, both biochemical composition and behavior of the disc were altered drastically. The objective of this study was to evaluate the role of the main matrix components in laser modification of annulus fibrosus (AF) under IR laser irradiation.

STUDY DESIGNS/MATERIALS AND METHODS

The samples of AF in a motion segment after hyaluronidase treatment, trypsin digestion and glycation by glyceraldehyde were heated in hydrothermal bath (95 degrees C, 2 min) or irradiated by laser at 1.56 microm. Specimens were imaged by cross-polarization optical coherence tomography (CP-OCT), and then analyzed by differential scanning calorimery (DSC).

RESULTS AND DISCUSSION

According to CP-OCT and DSC data non-significant alteration was revealed in AF after hyaluronidase treatment, glycation led to stabilization of annulus collagen and trypsin digestion resulted in a noticeable impairment of collagen fibrils. Laser treatment induced subsequent damages of AF matrix but these damages cannot be explained by laser heating only. The specificity of chemical modification of AF matrix has an influence on a character of collagen network alteration due to IR laser effect. Minimal and maximal alterations are observed for hyaluronidase and trypsin treated samples respectively. Glyceraldehyde fixed samples showed failure of the collagen structure after moderate laser treatment; at the same time thermal denaturation of collagen macromolecules was negligible. We assume that a mechanical effect of laser irradiation plays an important role in laser-induced annulus collagen modification and propose the scheme of physico-chemical process occurring under non-uniform IR laser treatment in AF tissue.

CONCLUSION

CP-OCT and DSC techniques allow us to record the alteration of collagen network organization as a result of chemical modification. There were detected significant and specific effects of the biochemical composition and material properties on the response of AF collagen network on laser irradiation. The results go in accordance with our hypothesis that the primary effect of laser influence on collagen network under tension is the mechanical damage of collagen fiber.

Stabilization of scleral collagen by glycerol aldehyde cross-linking

The paper aims at the evaluation of prospects for using glyceraldehyde as a cross-linking agent for the scleral tissue. Stability parameters (denaturation temperature, Young's modulus, ultimate tensile stress, proteolytic resistance) and analytical parameter (fluorescence intensity) were determined during the glycation process of isolated rabbit sclera. The analysis of fluorescence spectral characteristic provided information about some glycation products. The glyceraldehyde treatment was resulted in a significant increase in thermal stability, proteolytic resistance and improvement of biomechanical characteristics (Young's modulus, ultimate tensile stress). Unique properties of the reaction between scleral collagen and glyceraldehyde are observed at short cross-linking times. The appearance of intermediate collagen fraction with lowest thermal and proteolytic stability was detected.

A novel drug-eluting stent spray-coated with multi-layers of collagen and sirolimus

In the study, a novel drug-eluting stent for treating the coronary arterial stenosis was developed. Using a spray-coating method, aqueous bovine type I collagen and sirolimus were coated layer-by-layer alternatively onto the surface of a metallic stent and a topcoat of collagen was used as a barrier to control drug release. To prevent dissolution of the collagen matrices, the spray-coated collagen was further crosslinked by genipin, a naturally occurring crosslinking agent. The results obtained in the atomic force microscopy (AFM) examination suggested that the spray-coated collagen was tightly adhered to the surface of the stent. Additionally, the collagen coating was demonstrated by the scanning electron microscopy (SEM) to be sufficiently flexible to allow balloon expansion of the stent without cracking or peeling from the wire. The resistance against enzymatic degradation and the hemocompatibility of the collagen matrices increased significantly as their degree of crosslinking increased. All the studied sirolimus-loaded stents exhibited a nearly linear sustained-release profile (except at the end stage of release) with no significant burst releases. It was found that a topcoat of collagen on the collagen/sirolimus coated stent did slow down the release of sirolimus to some extent. Additionally, the number of layers of collagen/sirolimus coated significantly affected the duration of sirolimus released. Furthermore, the sustained-release duration of sirolimus was proportional to the actual amount of drug loaded on the stent. The aforementioned results indicated that the drug-eluting stent developed had a tightly adhered collagen coating and can be used as a drug reservoir to sustain release of sirolimus.

Stable ciliary activity in human nasal epithelial cells grown in a perfusion system

PURPOSE

Explore the usefulness of a perfusion system in order to establish human nasal epithelial cell cultures suitable for long-term in vitro ciliary beat frequency (CBF) and cilio-toxicity studies.

METHODS

The cells were obtained by protease digestion of nasal biopsy material. The cells were plated at a density of 0.8-1 x 10(6)/cm2 on Vitrogen-coated polyethylene terephthalate membranes, and cultured under submerged conditions in a CO2 incubator or in a perfusion system (initiated on days 8-9 after plating). The CBF was determined at 24.1 +/- 0.8 degrees C by a computerized microscope photometry system. The morphology of the cultured cells was characterized by transmission electron microscopy (TEM).

RESULTS

Under CO2 incubator culture conditions, stable ciliary activity was expressed and maintained from day 2 to day 24. Under perfusion system culture conditions, the CBF (mean+/-S.D., n = 4) amounted to 8.4 +/- 0.9 and 8.8 +/- 0.4 Hz on days 7 and 14, respectively. These values were lower as compared to the corresponding CBF obtained in the CO2 incubator cultures (9.5 +/- 0.6 and 9.9 +/- 1.0 Hz, respectively). Reference cilio-stimulatory (glycocholate) and cilio-inhibitory (chlorocresol) compounds were used to assess CBF reactivity. In the CO2 incubator and 7- and 14-days perfusion system cultures, glycocholate (0.5%) showed a reversible cilio-stimulatory effect of 23, 26 and 21%, respectively, while chlorocresol (0.005%) exerted a reversible cilio-inhibitory effect of 36, 40 and 36%, respectively. TEM revealed polarized cuboidal to columnar epithelial morphology, with well-differentiated ciliated cells under CO2 and perfusion system conditions (up to day 23).

CONCLUSION

Culturing human nasal epithelial cells on Vitrogen-coated polyethylene terephthalate membranes in submerged conditions in a CO2 incubator and in a perfusion system offers the possibility for long-term preservation (up to 22-24 days) of stable and reactive CBF in vitro.

Effects of crosslinking degree of an acellular biological tissue on its tissue regeneration pattern

It was reported that acellular biological tissues can provide a natural microenvironment for host cell migration and may be used as a scaffold for tissue regeneration. To reduce antigenicity, biological tissues have to be fixed with a crosslinking agent before implantation. As a tissue-engineering scaffold, it is speculated that the crosslinking degree of an acellular tissue may affect its tissue regeneration pattern. In the study, a cell extraction process was employed to remove the cellular components from bovine pericardia. The acellular tissues then were fixed with genipin at various known concentrations to obtain varying degrees of crosslinking. It was shown in the in vitro degradation study that after fixing with genipin, the resistance against enzymatic degradation of the acellular tissue increased significantly with increasing its crosslinking degree. In the in vivo subcutaneous study, it was found that cells (inflammatory cells, fibroblasts, endothelial cells, and red blood cells) were able to infiltrate into acellular tissues. Generally, the depth of cell infiltration into the acellular tissue decreased with increasing its crosslinking degree. Infiltration of inflammatory cells was accompanied by degradation of the acellular tissue. Due to early degradation, no tissue regeneration was observed within fresh (without crosslinking) and the 30%-degree-crosslinking acellular tissues. This is because the scaffolds provided by these two samples were already completely degraded before the infiltrated cells began to secrete their own extracellular matrix. In contrast, tissue regeneration (fibroblasts, neo-collagen fibrils, and neo-capillaries) was observed for the 60%- and 95%-degree-crosslinking acellular tissues by the histological examination, immunohistological staining, transmission electron microscopy, and denaturation temperature measurement. The 95%-degree-crosslinking acellular tissue was more resistant against enzymatic degradation than its 60%-degree-crosslinking counterpart. Consequently, tissue regeneration was limited in the outer layer of the 95%-degree-crosslinking acellular tissue throughout the entire course of the study (1-year postoperatively), while tissue regeneration was observed within the entire sample for the 60%-degree-crosslinking acellular tissue. In conclusion, the crosslinking degree determines the degradation rate of the acellular tissue and its tissue regeneration pattern.

Crosslinking of biological tissues using genipin and/or carbodiimide

The study was to investigate the crosslinking characteristics, mechanical properties, and resistance against enzymatic degradation of biological tissues after fixation with genipin (a naturally occurring crosslinking agent) and/or carbodiimide. Fresh tissue was used as a control. It was found that both genipin and carbodiimide are effective crosslinking agents for tissue fixation and genipin crosslinking is comparatively slower than carbodiimide crosslinking. Additionally, tissue fixation in genipin and/or carbodiimide may produce distinct crosslinking structures. Carbodiimide may form intrahelical and interhelical crosslinks within or between tropocollagen molecules, whereas genipin may further introduce intermicrofibrillar crosslinks between adjacent collagen microfibrils. The stability (denaturation temperature and resistance against enzymatic degradation) of the fixed tissue is mainly determined by its intrahelical and interhelical crosslinks. In contrast, intermicrofibrillar crosslinks significantly affect the mechanical properties (tissue shrinkage during fixation, tensile strength, strain at break, and ruptured pattern) of the fixed tissue. Moreover, the degree of enzymatic degradation of the fixed tissue may be influenced by three factors: the availability, to the enzyme, of recognizable cleavage sites, the degree of crosslinking, and the extent of helical integrity of tropocollagen molecules in tissue.

Feasibility study using a natural compound (reuterin) produced by Lactobacillus reuteri in sterilizing and crosslinking biological tissues

Bioprostheses derived from biological tissues have to be fixed and subsequently sterilized before they can be implanted in humans. Currently available crosslinking agents and sterilants used in the fixation or sterilization of biological tissues such as glutaraldehyde and formaldehyde are all highly cytotoxic, which may impair the biocompatibility of bioprostheses. Therefore, it is desirable to provide an agent suitable for use in biomedical applications that is of low cytotoxicity and may form sterile and biocompatible crosslinked products. To achieve this goal, a natural compound (reuterin), produced by Lactobacillus reuteri in the presence of glycerol, was used by our group. It is known that reuterin has antibacterial, antimycotic, and antiprotozoal activities. Additionally, as in the case with formaldehyde, reuterin may react with the free amino groups in biological tissues by using its aldehyde functional group. Therefore, it was speculated that reuterin could be used as a crosslinking agent and a sterilant for biological tissues in the same way as glutaraldehyde and formaldehyde. In the study, the production of reuterin, produced by Lactobacillus reuteri under control conditions, was reported. Preparative chromatography was used to purify reuterin. Also, the minimal inhibitory concentration and minimal bactericidal concentration of reuterin and its antimicrobial activity on a contaminated tissue were investigated. In addition, the cytotoxicity of reuterin was evaluated. Glutaraldehyde, the most commonly used sterilant in the sterilization of biological tissues, was employed as a control. Furthermore, the feasibility of using reuterin as a crosslinking agent in fixing biological tissues was studied. Fresh and the glutaraldehyde-fixed tissues were used as controls. The results obtained in the minimal inhibitory concentration and minimal bactericidal concentration studies and in the sterilization study of a contaminated tissue indicated that the antimicrobial activity of reuterin is significantly superior to its glutaraldehyde counterpart. In addition, the results obtained in the 3-(4,5-dimethylthiazol-yl)-2,5-diphenyltetrazolium bromide assay showed that reuterin is significantly less cytotoxic than glutaraldehyde. Additionally, it was found that reuterin is an effective crosslinking agent for biological tissue fixation. The reuterin-fixed tissue had comparable free amino group content, denaturation temperature, and resistance against enzymatic degradation as the glutaraldehyde-fixed tissue. In conclusion, the results obtained in this study indicate that reuterin is an effective agent in the sterilization and fixation of biological tissues.

Reaction diffusion model of the enzymatic erosion of insoluble fibrillar matrices

Predicting the time course of in vivo biodegradation is a key issue in the design of an increasing number of biomedical applications such as sutures, tissue analogs and drug-delivery devices. The design of such biodegradable devices is hampered by the absence of quantitative models for the enzymatic erosion of solid protein matrices. In this work, we derive and simulate a reaction diffusion model for the enzymatic erosion of fibrillar gels that successfully reproduces the main qualitative features of this process. A key aspect of the proposed model is the incorporation of steric hindrance into the standard Michaelis-Menten scheme for enzyme kinetics. In the limit of instantaneous diffusion, the model equations are analogous to the standard equations for enzymatic degradation in solution. Invoking this analogy, the total quasi-steady-state approximation is used to derive approximate analytical solutions that are valid for a wide range of in vitro conditions. Using these analytical approximations, an experimental-theoretical method is derived to unambiguously estimate all the kinetic model parameters. Moreover, the analytical approximations correctly describe the characteristic hyperbolic dependence of the erosion rate on enzyme concentration and the zero-order erosion of thin fibers. For definiteness, the analysis of published experimental results of enzymatic degradation of fibrillar collagen is demonstrated, and the role of diffusion in these experiments is elucidated.

Biocompatibility study of a biological tissue fixed with a naturally occurring crosslinking reagent

A recognized disadvantage of the currently available chemical reagents used to fix bioprostheses is the potential toxic effects a recipient may be exposed to from residues. It is therefore desirable to provide a crosslinking reagent that is of low cytotoxicity and can form stable and biocompatible crosslinked products. To achieve this goal, a naturally occurring crosslinking reagent-genipin-was used by our group to fix biological tissues. Genipin can be obtained from its parent compound geniposide, which can be isolated from the fruits of Gardenia jasminoides ELLIS. In our previous feasibility study, it was found that the cytotoxicity of genipin is significantly lower than both glutaraldehyde and an epoxy compound. Additionally, it was shown that genipin can form stable crosslinked products. The present study further investigates the biocompatibility of a genipin-fixed porcine pericardium implanted subcutaneously in a growing rat model. The fresh, glutaraldehyde-, and epoxy-fixed counterparts were used as controls. It was noted that the inflammatory reaction of the genipin-fixed tissue was significantly less than its glutaraldehyde- and epoxy-fixed counterparts. Also, the genipin-fixed tissue has tensile strength and resistance against in vivo degradation comparable to the glutaraldehyde-fixed tissue. Additionally, the calcium content of the genipin-fixed tissue measured throughout the entire course of the study was minimal. Nevertheless, further study in calcification for the genipin-fixed tissue should be conducted in a blood-contact environment. The results obtained in this subcutaneous study indicate that genipin is a promising crosslinking reagent for biological tissue fixation. However, further durability testing in vitro and in vivo are needed to determine the relative functional merits of this new crosslinker.

Feasibility study of a natural crosslinking reagent for biological tissue fixation

Bioprostheses derived from biological tissues must be chemically modified and subsequently sterilized before they can be implanted in humans. Various crosslinking reagents, including formaldehyde, glutaraldehyde, dialdehyde starch, and epoxy compound, have been used to chemically modify biological tissues. However, these synthetic crosslinking reagents are all highly (or relatively highly) cytotoxic. It is therefore desirable to provide a crosslinking reagent suitable for use in biomedical applications that is of low cytotoxicity and that forms stable and biocompatible crosslinked products. This study evaluates the feasibility of using a naturally occurring crosslinking reagent--genipin--to chemically modify biological tissues. Genipin and its related iridoid compounds, extracted from gardenia fruits, have been used in traditional Chinese medicine for the treatments of jaundice and various inflammatory and hepatic diseases. In this feasibility study, the cytotoxicity of genipin and the crosslinking characteristics of genipin-fixed biological tissues were investigated. Fresh porcine pericardia procured from a slaughterhouse were used as raw materials. Glutaraldehyde and an epoxy compound (ethylene glycol diglycidyl ether), which has been used extensively in developing bioprostheses, were used as controls. It was found that the cytotoxicity of genipin was significantly lower than that of glutaraldehyde and the epoxy compound. The amino acid residues in the porcine pericardium that may react with genipin were lysine, hydroxylysine, and arginine. Additionally, the genipin-fixed tissue had a mechanical strength and resistance against enzymatic degradation comparable to the glutaraldehyde-fixed tissue. This suggests that genipin can form stable crosslinked products. The results of this in vitro study demonstrate that genipin is an effective crosslinking reagent for biological tissue fixation.