Biocompatibility of electroactive polymers in tissues

SERS biosensor with plastic antibodies for detection of a cancer biomarker protein

Surface-enhanced Raman scattering (SERS) is a powerful method for detecting breast cancer-specific biomarkers due to its extraordinary enhancement effects obtained by localized surface plasmon resonance (LSPR) in metallic nanostructures at hotspots. In this research, gold nanostars (AuNSs) were used as SERS probes to detect a cancer biomarker at very low concentrations. To this end, we combined molecularly imprinted polymers (MIPs) as a detection layer with SERS for the detection of the biomarker CA 15-3 in point-of-care (PoC) analysis. This required two main steps: (i) the deposition of MIPs on a gold electrode, followed by a second step (ii) antibody binding with AuNSs containing a suitable Raman reporter to enhance Raman signaling (SERS). The MPan sensor was prepared by electropolymerization of the monomer aniline in the presence of CA 15-3. The template molecule was then extracted from the polymer using sodium dodecyl sulfate (SDS). In parallel, a control material was prepared in the absence of the protein (NPan). Surface modification for the control was performed using electrochemical techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The performance of the sensor was evaluated using the SERS technique, in which the MPan sensor is first incubated with the protein and then exposed to the SERS probe. Under optimized conditions, the device showed a linear response to CA 15-3 concentrations from 0.016 to 248.51 U mL-1 in a PBS buffer at pH 7.4 in 1000-fold diluted serum. Overall, this approach demonstrates the potential of SERS as an optical reader and opens a new avenue for biosensing applications.

Polylactic Acid/Polyaniline Nanofibers Subjected to Pre- and Post-Electrospinning Plasma Treatments for Refined Scaffold-Based Nerve Tissue Engineering Applications

Composite biopolymer/conducting polymer scaffolds, such as polylactic acid (PLA)/ polyaniline (PAni) nanofibers, have emerged as popular alternative scaffolds in the electrical-sensitive nerve tissue engineering (TE). Although mimicking the extracellular matrix geometry, such scaffolds are highly hydrophobic and usually present an inhomogeneous morphology with massive beads that impede nerve cell-material interactions. Therefore, the present study launches an exclusive combinatorial strategy merging successive pre- and post-electrospinning plasma treatments to cope with these issues. Firstly, an atmospheric pressure plasma jet (APPJ) treatment was applied on PLA and PLA/PAni solutions prior to electrospinning, enhancing their viscosity and conductivity. These liquid property changes largely eliminated the beaded structures on the nanofibers, leading to uniform and nicely elongated fibers having average diameters between 170 and 230 nm. After electrospinning, the conceived scaffolds were subjected to a N₂ dielectric barrier discharge (DBD) treatment, which significantly increased their surface wettability as illustrated by large decreases in water contact angles for values above 125° to values below 25°. X-ray photoelectron spectroscopy (XPS) analyses revealed that 3.3% of nitrogen was implanted on the nanofibers surface in the form of C-N and N-C=O functionalities upon DBD treatment. Finally, after seeding pheochromocytoma (PC-12) cells on the scaffolds, a greatly enhanced cell adhesion and a more dispersive cell distribution were detected on the DBD-treated samples. Interestingly, when the APPJ treatment was additionally performed, the extension of a high number of long neurites was spotted leading to the formation of a neuronal network between PC-12 cell clusters. In addition, the presence of conducting PAni in the scaffolds further promoted the behavior of PC-12 cells as illustrated by more than a 40% increase in the neurite density without any external electrical stimulation. As such, this work presents a new strategy combining different plasma-assisted biofabrication techniques of conducting nanofibers to create promising scaffolds for electrical-sensitive TE applications.

Polyaniline (PANI)-conjugated tungsten disulphide (WS2) nanoparticles as potential therapeutics against brain-eating amoebae

Brain-eating amoebae, including Acanthamoeba castellanii and Naegleria fowleri, are the causative agents of devastating central nervous system infections with extreme mortality rates. There is an indisputable urgency for the development of effective chemotherapeutic agents for the control of these diseases that are increasing in incidence. Here, we evaluated the anti-amoebic potential of polyaniline:tungsten disulphide (PANI:WS₂) nanocomposite against the infective trophozoite and cyst stages of N. fowleri and A. castellanii. Throughout these evaluations, significant viability inhibition was noted when 100 µg/mL of PANI:WS₂ was employed at its 1:5 formulation. These effects were studied to be due to increased levels of reactive oxygen species (ROS) as visualised through fluorescence microscopy. Furthermore, field emission scanning electron microscopy (FE-SEM) analysis pictured disruption to amoeba morphology. The host-cell cytotoxicity of the nanocomposite (PANI:WS₂) was studied to be negligible, making it an attractive avenue in the pursuit for effective treatments for brain-eating amoeba infections. KEY POINTS: • Synthesis of polyaniline:tungsten disulphide (PANI:WS₂) nanocomposite. • Anti-amoebic potential of PANI:WS₂ nanocomposite. • PANI:WS₂ nanocomposites are promising anti-amoebic agents in vitro.

Physicochemical Properties and Atomic-Scale Interactions in Polyaniline (Emeraldine Base)/Starch Bio-Based Composites: Experimental and Computational Investigations

The processability of conductive polymers still represents a challenge. The use of potato starch as a steric stabilizer for the preparation of stable dispersions of polyaniline (emeraldine base, EB) is described in this paper. Biocomposites are obtained by oxidative polymerization of aniline in aqueous solutions containing different ratios of aniline and starch (% w/w). PANI-EB/Starch biocomposites are subjected to structural analysis (UV-Visible, RAMAN, ATR, XRD), thermal analysis (TGA, DSC), morphological analysis (SEM, Laser Granulometry), and electrochemical analysis using cyclic voltammetry. The samples were also tested for their solubility using various organic solvents. The results showed that, with respect to starch particles, PANI/starch biocomposites exhibit an overall decrease in particles size, which improves both their aqueous dispersion and solubility in organic solvents. Although X-ray diffraction and DSC analyses indicated a loss of crystallinity in biocomposites, the cyclic voltammetry tests revealed that all PANI-EB/Starch biocomposites possess improved redox exchange properties. Finally, the weak interactions at the atomic-level interactions between amylopectin–aniline and amylopectin–PANI were disclosed by the computational studies using DFT, COSMO-RS, and AIM methods.

Polyaniline-Conjugated Boron Nitride Nanoparticles Exhibiting Potent Effects against Pathogenic Brain-Eating Amoebae

Free-living amoebae include Acanthamoeba castellanii and Naegleria fowleri that are opportunistic protozoa responsible for life-threatening central nervous system infections with mortality rates over 90%. The rising number of cases and high mortality rates are indicative of the critical unmet need for the development of efficient drugs in order to avert future deaths. In this study, we assess the anti-amoebic capacity of a conducting polymer nanocomposite comprising polyaniline (PANI) and hexagonal boron nitride (hBN) against A. castellanii and N. fowleri. We observed significant amoebicidal and cysticidal effects using 100 μg/mL PANI/hBN (P < 0.05). Further, the nanocomposite demonstrated negligible cytotoxicity toward HaCaT and primary human corneal epithelial cells (pHCECs). In evaluating the mode of inhibition of A. castellanii due to treatment with PANI/hBN, increased intracellular reactive oxygen species (ROS) was measured and scanning microscopy visualized the formation of pores in the amoebae. Overall, this study is suggestive of the potential of the PANI/hBN nanocomposite as a promising therapy for amoeba infections.

Polyaniline nano-needles into electrospun bio active fibres support in vitro astrocyte response

Recent studies have proposed that the bioelectrical response of glial cells, called astrocytes, currently represents a key target for neuroregenerative purposes. Here, we propose the fabrication of electrospun nanofibres containing gelatin and polyaniline (PANi) synthesized in the form of nano-needles (PnNs) as electrically conductive scaffolds to support the growth and functionalities of primary astrocytes. We report a fine control of the morphological features in terms of fibre size and spatial distribution and fibre patterning, i.e. random or aligned fibre organization, as revealed by SEM- and TEM-supported image analysis. We demonstrate that the peculiar morphological properties of fibres - i.e., the fibre size scale and alignment - drive the adhesion, proliferation, and functional properties of primary cortical astrocytes. In addition, the gradual transmission of biochemical and biophysical signals due to the presence of PnNs combined with the presence of gelatin results in a permissive and guiding environment for astrocytes. Accordingly, the functional properties of astrocytes measured via cell patch-clamp experiments reveal that PnNs do not alter the bioelectrical properties of resting astrocytes, thus setting the scene for the use of PnN-loaded nanofibres as bioconductive platforms for interfacing astrocytes and controlling their bioelectrical properties.

Optimizing the electrical conductivity of polyacrylonitrile/polyaniline with nickel nanoparticles for the enhanced electrostimulation of Schwann cells proliferation

Tissue engineering scaffolds made of biocompatible polymers are promising alternatives for nerve reparation. For this application, cell proliferation will be speeded up by electrostimulation, which required electrically-conductive materials. Here, a biomimicking scaffold with optimized conductivity was developed from electrospun polyacrylonitrile/electrically-conductive polyaniline (PAN/PANI) nanofibers doped with Ni nanoparticles. PAN/PANI/Ni was biocompatible for Schwann cells and exhibited a suitable tensile strength and wettability for cell proliferation. When compared with unmodified PAN/PANI, the electrical conductivity of PAN/PANI/Ni was 6.4 fold higher. Without electrostimulation, PAN/PANI and PAN/PANI/Ni exhibited similar Schwann cells' proliferation rates. Upon electrostimulation at 100 mV cm^-1 for one hour per day over five days, PAN/PANI/Ni accelerated Schwann cells' proliferation 2.1 times compared to PAN/PANI. These results demonstrate the importance of expanding the electrical conductivity of the tissue engineering scaffold to ensure optimal electrostimulation of nerve cell growth. Additionally, this study describes a straightforward approach to modulate the electrical conductivity of polymeric materials via the addition of Ni nanoparticles that can be applied to different biomimicking scaffolds for nerve healing.

Regenerative medicine for skeletal muscle loss: a review of current tissue engineering approaches

Skeletal muscle is capable of regeneration following minor damage, more significant volumetric muscle loss (VML) however results in permanent functional impairment. Current multimodal treatment methodologies yield variable functional recovery, with reconstructive surgical approaches restricted by limited donor tissue and significant donor morbidity. Tissue-engineered skeletal muscle constructs promise the potential to revolutionise the treatment of VML through the regeneration of functional skeletal muscle. Herein, we review the current status of tissue engineering approaches to VML; firstly the design of biocompatible tissue scaffolds, including recent developments with electroconductive materials. Secondly, we review the progenitor cell populations used to seed scaffolds and their relative merits. Thirdly we review in vitro methods of scaffold functional maturation including the use of three-dimensional bioprinting and bioreactors. Finally, we discuss the technical, regulatory and ethical barriers to clinical translation of this technology. Despite significant advances in areas, such as electroactive scaffolds and three-dimensional bioprinting, along with several promising in vivo studies, there remain multiple technical hurdles before translation into clinically impactful therapies can be achieved. Novel strategies for graft vascularisation, and in vitro functional maturation will be of particular importance in order to develop tissue-engineered constructs capable of significant clinical impact.

A Review on Chitosan's Uses as Biomaterial: Tissue Engineering, Drug Delivery Systems and Cancer Treatment

Chitosan, derived from chitin, is a biopolymer consisting of arbitrarily distributed β-(1-4)-linked D-glucosamine and N-acetyl-D-glucosamine that exhibits outstanding properties- biocompatibility, biodegradability, non-toxicity, antibacterial activity, the capacity to form films, and chelating of metal ions. Most of these peculiar properties are attributed to the presence of free protonable amino groups along the chitosan backbone, which also gives it solubility in acidic conditions. Moreover, this biopolymer can also be physically modified, thereby presenting a variety of forms to be developed. Consequently, this polysaccharide is used in various fields, such as tissue engineering, drug delivery systems, and cancer treatment. In this sense, this review aims to gather the state-of-the-art concerning this polysaccharide when used as a biomaterial, providing information about its characteristics, chemical modifications, and applications. We present the most relevant and new information about this polysaccharide-based biomaterial's applications in distinct fields and also the ability of chitosan and its various derivatives to selectively permeate through the cancer cell membranes and exhibit anticancer activity, and the possibility of adding several therapeutic metal ions as a strategy to improve the therapeutic potential of this polymer.

A novel, low cost, and accessible method for rapid fabrication of the modifiable microfluidic devices

As microfluidic chips are evolving to become a significant analysis tool toward POCT devices, it is crucial to make the cost and the time required for the fabrication process of these chips as low as possible. Because of the multidisciplinary nature of these systems and the collaboration of many different laboratories and organizations from vastly various fields with unequal types of equipment, it is essential to develop new techniques and materials to make the integration of disparate systems together more straightforward, accessible, and economical. In this paper, we present ethylene–vinyl acetate (EVA) as a new polymer-based material for the fabrication of different microfluidic chips, which brings new features and tools in fabrication, integration, and functionality of microfluidic systems. We put this material next to PDMS for comparison between various aspects of these materials. We have shown that besides the low-cost ability, ubiquitousness, geometrical modifiability, and ease of fabrication of EVA chips, due the lower hydrophobicity and lower terahertz (THz) absorption of EVA than PDMS, EVA chips, in comparison to PDMS counterparts, can work faster, have less number of channel blocking and can be used in THz biosensing application like metamaterial-based cancer detection. Finally, several devices are made using EVA to demonstrate the functionality and versatility of this material for the fabrication of microfluidic chips.

Effect of structural factors on the physicochemical properties of functionalized polyanilines

This review discusses the physical and physicochemical properties of polyaniline (PANI) derivatives. The most important methods for the preparation of functionalized polyanilines are presented. The presence of various substituents in its structure changes the polymer characteristics significantly due to steric and electronic effects of the functional groups. This review describes the relationship between the properties of functionalized polyanilines depending on the nature, number and position of the substituents at the aromatic ring.

Electroactive nanofibers mats based on poly(l-lactic acid)/poly(ortho-ethoxyaniline) blends for biological applications

The combination of scaffolds with desirable topographic characteristics and the use of electrical stimulus consist of a strategy to repair and regenerate tissues. An interesting approach to obtain electroactive scaffolds with the aforementioned features comprises on the use of conducting polymers which can be blended with other biocompatible polymers. In this work, poly(l-lactic acid) (PLLA) and poly(ortho-ethoxyaniline) (POEA) were synthesized and PLLA/POEA mats were prepared for the first time by electrospinning technique. Topographic characterization of PLLA/POEA showed a tunable mean diameter of the nanofibers by changing the electrospinning parameters. The presence of POEA into the blend was confirmed by X-ray photoelectron and Fourier-transform infrared spectroscopy analyses. Differential scanning calorimetry curves of PLLA/POEA exhibited shift positions of T_c and absence of the exothermic peak related to the characteristic isomerization process of POEA at high temperatures. The thermal analysis results indicate a favored miscibility between the polymers which is likely resulted from the strong interaction between polymers functionalities. The homogenous distribution of POEA chains throughout the scaffold rendered redox reversibility property for the mats. Biocompatibility results showed non-cytotoxic features for PLLA/POEA, attesting this novel system as a promising candidate for biological applications.

Application of Biodegradable and Biocompatible Nanocomposites in Electronics: Current Status and Future Directions

With the continuous increase in the production of electronic devices, large amounts of electronic waste (E-waste) are routinely being discarded into the environment. This causes serious environmental and ecological problems because of the non-degradable polymers, released hazardous chemicals, and toxic heavy metals. The appearance of biodegradable polymers, which can be degraded or dissolved into the surrounding environment with no pollution, is promising for effectively relieving the environmental burden. Additionally, biodegradable polymers are usually biocompatible, which enables electronics to be used in implantable biomedical applications. However, for some specific application requirements, such as flexibility, electric conductivity, dielectric property, gas and water vapor barrier, most biodegradable polymers are inadequate. Recent research has focused on the preparation of nanocomposites by incorporating nanofillers into biopolymers, so as to endow them with functional characteristics, while simultaneously maintaining effective biodegradability and biocompatibility. As such, bionanocomposites have broad application prospects in electronic devices. In this paper, emergent biodegradable and biocompatible polymers used as insulators or (semi)conductors are first reviewed, followed by biodegradable and biocompatible nanocomposites applied in electronics as substrates, (semi)conductors and dielectrics, as well as electronic packaging, which is highlighted with specific examples. To finish, future directions of the biodegradable and biocompatible nanocomposites, as well as the challenges, that must be overcome are discussed.

Conjugated Polymers in Bioelectronics: Addressing the Interface Challenge

Conjugated polymers are the material of choice for organic bioelectronic interfaces as they combine mechanical flexibility with electric and ionic conductivity. Their attractive properties are largely demonstrated in vitro, while the in vivo applications are limited to the coating of inorganic electrodes, where they are used to improve the intimate electronic contact between the device and the tissue. However, there has not been a commensurate rise in the in vivo applications of entirely organic implantable electronic devices based on conjugated polymers. To date, there is no comprehensive understanding of how these devices will interface with real biological systems. With the push toward increasingly thinner and more flexible next generation medical implants, this limitation remains a major detractor in the translation of conjugated polymers toward biological applications. This research news article examines the few reported in vivo studies and attempts to establish why there is such a dearth in the literature.

Conducting Polymers, Hydrogels and Their Composites: Preparation, Properties and Bioapplications

This review is focused on current state-of-the-art research on electroactive-based materials and their synthesis, as well as their physicochemical and biological properties. Special attention is paid to pristine intrinsically conducting polymers (ICPs) and their composites with other organic and inorganic components, well-defined micro- and nanostructures, and enhanced surface areas compared with those of conventionally prepared ICPs. Hydrogels, due to their defined porous structures and being filled with aqueous solution, offer the ability to increase the amount of immobilized chemical, biological or biochemical molecules. When other components are incorporated into ICPs, the materials form composites; in this particular case, they form conductive composites. The design and synthesis of conductive composites result in the inheritance of the advantages of each component and offer new features because of the synergistic effects between the components. The resulting structures of ICPs, conducting polymer hydrogels and their composites, as well as the unusual physicochemical properties, biocompatibility and multi-functionality of these materials, facilitate their bioapplications. The synergistic effects between constituents have made these materials particularly attractive as sensing elements for biological agents, and they also enable the immobilization of bioreceptors such as enzymes, antigen-antibodies, and nucleic acids onto their surfaces for the detection of an array of biological agents. Currently, these materials have unlimited applicability in biomedicine. In this review, we have limited discussion to three areas in which it seems that the use of ICPs and materials, including their different forms, are particularly interesting, namely, biosensors, delivery of drugs and tissue engineering.

Organic Bioelectronics: Materials and Biocompatibility

Organic electronic materials have been considered for a wide-range of technological applications. More recently these organic (semi)conductors (encompassing both conducting and semi-conducting organic electronic materials) have received increasing attention as materials for bioelectronic applications. Biological tissues typically comprise soft, elastic, carbon-based macromolecules and polymers, and communication in these biological systems is usually mediated via mixed electronic and ionic conduction. In contrast to hard inorganic semiconductors, whose primary charge carriers are electrons and holes, organic (semi)conductors uniquely match the mechanical and conduction properties of biotic tissue. Here, we review the biocompatibility of organic electronic materials and their implementation in bioelectronic applications.

Copper-polyaniline nanocomposite: Role of physicochemical properties on the antimicrobial activity and genotoxicity evaluation

Copper nanoparticles (Cu NPs) have proven to own excellent antimicrobial efficacy, but the problems of easy oxidation and aggregation limit their practical application. Here, nanocomposite based on polyaniline (PANI) and Cu NPs solved this problem and brought additional physicochemical properties that are markedly advantageous for antimicrobial applications. Current work exploits this potential, to examine its time- and concentration-dependent antimicrobial activity, employing E. coli, S. aureus, and C. albicans as a model microbial species. Regarding the presence of polaronic charge carriers in the fibrous polyaniline network, effects of Cu NPs' size and their partially oxidized surfaces (the data were confirmed by HRTEM, FESEM, XRD, Raman and XPS analysis), as well as rapid copper ions release, Cu-PANI nanocomposite showed efficient bactericidal and fungicidal activities at the concentrations ≤1 ppm, within the incubation time of 2 h. Beside the quantitative analysis, the high levels of cellular disruption for all tested microbes were evidenced by atomic force microscopy. Moreover, the minimum inhibitory and bactericidal concentrations of the Cu-PANI nanocomposite were lower than those reported for other nanocomposites. Using such low concentrations is recognized as a good way to avoid its toxicity toward the environment. For this purpose, Cu-PANI nanocomposite is tested for its genotoxicity and influence on the oxidative status of the human cells in vitro.

Vibro-Perception of Optical Bio-Inspired Fiber-Skin

In this research, based on the principle of optical interferometry, the Mach-Zehnder and Optical Phase-locked Loop (OPLL) vibro-perception systems of bio-inspired fiber-skin are designed to mimic the tactile perception of human skin. The fiber-skin is made of the optical fiber embedded in the silicone elastomer. The optical fiber is an instinctive and alternative sensor for tactile perception with high sensitivity and reliability, also low cost and susceptibility to the magnetic interference. The silicone elastomer serves as a substrate with high flexibility and biocompatibility, and the optical fiber core serves as the vibro-perception sensor to detect physical motions like tapping and sliding. According to the experimental results, the designed optical fiber-skin demonstrates the ability to detect the physical motions like tapping and sliding in both the Mach-Zehnder and OPLL vibro-perception systems. For direct contact condition, the OPLL vibro-perception system shows better performance compared with the Mach-Zehnder vibro-perception system. However, the Mach-Zehnder vibro-perception system is preferable to the OPLL system in the indirect contact experiment. In summary, the fiber-skin is validated to have light touch character and excellent repeatability, which is highly-suitable for skin-mimic sensing.

Intracellular calcium ions and morphological changes of cardiac myoblasts response to an intelligent biodegradable conducting copolymer

A novel biodegradable conducting polymer, PLA-b-AP-b-PLA (PAP) triblock copolymer of poly (l-lactide) (PLA) and aniline pentamer (AP) with electroactivity and biodegradability, was synthesized and its potential application in cardiac tissue engineering was studied. The PAP copolymer presented better biocompatibility compared to PANi and PLA because of promoted cell adhesion and spreading of rat cardiac myoblasts (H9c2 cell line) on PAP/PLA thin film. After pulse electrical stimulation (5 V, 1 Hz, 500 ms) for 6 days, the proliferation ratio, and intracellular calcium concentration of H9c2 cells on PAP/PLA were improved significantly. Meanwhile, cell morphology changed by varying the pulse electrical signals. Especially, the oriented pseudopodia-like structure was observed from H9c2 cells on PAP/PLA after electrical stimulation. It is regarded that the novel conducting copolymer could enhance electronic signals transferring between cells because of its special electrochemical properties, which may result in the differentiation of cardiac myoblasts.

Tissue reaction after subcutaneous implants of a new material composed of ethylene-vinyl acetate and starch for future use as a biomaterial

This study aimed to evaluate the tissue reaction of ethylene-vinyl acetate (EVA) in 4 different compositions and processing: EVA foamed at high pressure with ultrasound (EVACU); EVA with 15% starch foamed at high pressure with ultrasound (EVAMCU); EVA with 15% starch foamed at high pressure without ultrasound and EVA foamed at high pressure without ultrasound as future use as a porous scaffold. Scanning electron microscopy images showed the influence of starch, reducing the diameter of pores. The number of open pores was also reduced with the addition of starch. The ultrasound applied during the manufacturing of composites does not affect these characteristics. Eighteen rats were used to test the tissue reaction of materials and PTFE (polytetrafluoroethylene), proven biocompatible material. After 7, 15, and 60 days of surgery, the materials were removed and processed for microscopic evaluation and counting of the inflammatory infiltrate. The data shows inflammatory reaction similar to PTFE. However, in the quantitative analysis at 60 days, the EVACU and EVAMCU showed less quantity of mononuclear cells (p < 0.05). Thus, the results suggest that the use of ultrasound in the production method (EVA) seems to have improved cell behavior regarding the reduction of infiltration over the period, with tissue response equivalent to the PTFE. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 400-407, 2019.

Multifunctional nanoparticles as somatostatin receptor-targeting delivery system of polyaniline and methotrexate for combined chemo-photothermal therapy

Lanreotide (LT), a synthetic analog of somatostatin, has been demonstrated to specifically bind to somatostatin receptors (SSTRs), which are widely overexpressed in several types of cancer cells. In this study, we incorporated a chemotherapeutic agent, methotrexate (MTX), and a photosensitizer material, polyaniline (PANI), into hybrid polymer nanoparticles (NPs), which could target cancer cells after conjugation with LT (LT-MTX/PANI NPs). The successful preparation of LT-MTX/PANI NPs was confirmed by a small particle size (187.9 ± 3.2 nm), a polydispersity index of 0.232 ± 0.011, and a negative ζ potential of -14.6 ± 1.0 mV. Notably, LT-MTX/PANI NPs showed a greater uptake into SSTR-positive cancer cells and thereby better inhibited cell viability and induced higher levels of apoptosis than MTX, PANI NP, and MTX/PANI NP treatments did. In addition, the heat associated with the burst drug release induced by near-infrared (NIR) irradiation resulted in remarkably enhanced cell apoptosis, which was confirmed by an increase in the expression levels of apoptotic marker proteins. In agreement with the in vitro results, the administration of the SSTR-targeting NPs, followed by NIR exposure, to xenograft tumor-bearing mice resulted in an improved suppression of tumor development compared to that shown by MTX, PANI NPs, and MTX/PANI NPs, as well as by LT-MTX/PANI NPs without photothermal therapy. Thus, the SSTR-targeting NPs could be a promising delivery system for the effective treatment of SSTR-positive cancers.

STATEMENT OF SIGNIFICANCE

Somatostatin receptors are widely overexpressed in several types of cancer cells. In this study, we designed nanoparticles for targeted delivery of chemotherapeutic agents to tumor sites by conjugating hybrid polymers with a synthetic analog of somatostatin, specifically binding to somatostatin receptors. In addition, a photosensitizer material, polyaniline, was incorporated into the nanoparticles for combined chemo-photothermal therapy. The results demonstrated clear advantages of the newly designed targeted nanoparticles over their non-targeted counterparts or a free chemotherapeutic drug in inhibiting the viability of cancer cells in vitro and targeting/suppressing the tumor growth in an animal xenograft model. The study suggests that the designed nanoparticles are a promising delivery system for the effective treatment of somatostatin receptor-positive cancers.

Tailoring Biomaterial Compatibility: In Vivo Tissue Response versus in Vitro Cell Behavior

Biocompatibility relies essentially on surface phenomena, represented by cell-cell, cell-material and material (polymer)-protein interactions. An in vivo and in vitro experimental investigation was carried out on the biomaterials of two different classes with a good potential for in situ utilisation. Non-resorbable (Polypyrrole, Polyaniline, Polyimide) and resorbable (PLLA-PDXO-PLLA) materials for tissue engineering were studied for their overall tissue tolerance and cellular interactions. These non-resorbable polymers conceived for biosensor applications and implantable drug-delivery systems are intrinsically conductive. The PLLA-PDXO-PLLA triblock copolymer showed interesting tensile properties for bone and cartilage tissue engineering due to the presence of 1,5-dioxepan-2-one. In vitro and in vivo parallel studies showed an interesting correspondence: a) the cells in contact with the resorbable material that appeared to be capable of migratory-regenerative aspects in vitro exhibited good compatibility in vivo; whereas b) the non-resorbable materials, which are designed to remain in situ in vivo, were seen to have the potential to represent an adverse factor (inflammation, fibrotic reactions) that correlated with some aspects of cell behaviour in vitro.

Injectable, cytocompatible, elastic, free radical scavenging and electroconductive hydrogel for cardiac cell encapsulation

The injectable electroconductive hydrogels are desirable for the regenerative therapy of electroresponsive tissues like heart. With the present electroconductive hydrogels, the issues of cytotoxicity, biodegradability, and diffusion of the conductive element and poor water solubility limit their applications. Here, electroconductive injectable single component hydrogels, PANIE-P/PEGDA and PANIS-P/PEGDA, are prepared with fumarate-co-PEG-co-sebacate comacromer conjugated with non-sulfonated/sulfonated polyaniline and PEGDA. These hydrogels have maximum electrical conductivity of 0.351±0.043×10^-3Scm^-1 and 0.550±0.016×10^-3Scm^-1, which is comparable to the native myocardium. The hydrogels with 50% comacromer concentration coded as PE50P and PS50P retain 82.48% and 84.08% water on equilibrium swelling respectively. The hydrogels have required a porous surface for cell growth and proliferation. PS50P hydrogel has stiffness of 442kPa with elastic characteristics. The hydrogel is compatible with L929 fibroblast and H9c2 cardiomyoblast cells. PS50P hydrogel has better free radical scavenging property and protective effect over cells under oxidative stress. The hydrogel retains encapsulated cardiomyoblast cells with 98% viability under static long-term in vitro culture. Briefly, the PS50P hydrogel is electroconductive, free radical scavenging and mechanically suitable for cardiac regenerative therapy.

Conductive and biodegradable scaffolds based on a five-arm and functionalized star-like polyaniline–polycaprolactone copolymer with a d-glucose core

The scaffolds demonstrated a porous structure with a large surface area and electrical conductivity, imitating the ECM to regulate cell attachment, proliferation, and differentiation.

Electro-Active Polymers (EAPs): A Promising Route to Design Bio-Organic/Bioinspired Platforms with on Demand Functionalities

Through recent discoveries and new knowledge among correlations between molecular biology and materials science, it is a growing interest to design new biomaterials able to interact-i.e., to influence, to guide or to detect-with cells and their surrounding microenvironments, in order to better control biological phenomena. In this context, electro-active polymers (EAPs) are showing great promise as biomaterials acting as an interface between electronics and biology. This is ascribable to the highly tunability of chemical/physical properties which confer them different conductive properties for various applicative uses (i.e., molecular targeting, biosensors, biocompatible scaffolds). This review article is divided into three parts: the first one is an overview on EAPs to introduce basic conductivity mechanisms and their classification. The second one is focused on the description of most common processes used to manipulate EAPs in the form of two-dimensional (2D) and three-dimensional (3D) materials. The last part addresses their use in current applications in different biomedical research areas including tissue engineering, biosensors and molecular delivery.

Bicomponent electrospun scaffolds to design extracellular matrix tissue analogs

In the last decade, bicomponent fibers have been proposed to fabricate bio-inspired systems for tissue repair, regenerative medicine, medical healthcare and clinical applications. In comparison with monocomponent fibers, key advantage concerns their ability of self-adapting to the physiological conditions through an extended pattern of signals--morphological, chemical and physical ones--confined at the single fiber level. Hydrophobic/hydrophilic phases may be variously organized by tuneable processing modes (i.e., blending, core/shell, interweaving) thus offering different benefits in terms of biological activity, fluid sorption and molecular transport properties (first generation). The possibility to efficiently graft cell-adhesive proteins and peptide sequences onto the fiber surface mediated by spacers or impregnating hydrogels allows to trigger cell late activities by a controlled and sustained release in vitro of specific biomolecules (i.e., morphogens, growth factors). Here, we introduce an overview of current approaches based on bicomponent fiber use as extra cellular matrix analogs with cell-instructive functions and hierarchal organization of living tissues.

Novel nanostructured star-shaped polyaniline derivatives and their electrospun nanofibers with gelatin

The aim of this study is the synthesis, characterization and investigation of some physicochemical properties of the star-shaped polyaniline derivatives. The nanofibers of the synthesized star-shaped polymers with gelatin were also prepared.

Conducting polyaniline based cell culture substrate for embryonic stem cells and embryoid bodies

Noncytotoxic polyaniline–poly(2-acrylamido-2-methyl-1-propanesulfonate) films which are electrically conducting at the physiological pH were applied as cell culture substrate. The films demonstrate selective interaction with specific target cells.

Novel conductive polypyrrole/zinc oxide/chitosan bionanocomposite: synthesis, characterization, antioxidant, and antibacterial activities

An antibacterial and conductive bionanocomposite (BNC) film consisting of polypyrrole (Ppy), zinc oxide (ZnO) nanoparticles (NPs), and chitosan (CS) was electrochemically synthesized on indium tin oxide (ITO) glass substrate by electrooxidation of 0.1 M pyrrole in aqueous solution containing appropriate amounts of ZnO NPs uniformly dispersed in CS. This method enables the room temperature electrosynthesis of BNC film consisting of ZnO NPs incorporated within the growing Ppy/CS composite. The morphology of Ppy/ZnO/CS BNC was characterized by scanning electron microscopy. ITO–Ppy/CS and ITO–Ppy/ZnO/CS bioelectrodes were characterized using the Fourier transform infrared technique, X-ray diffraction, and thermogravimetric analysis. The electrical conductivity of nanocomposites was investigated by a four-probe method. The prepared nanocomposites were analyzed for antioxidant activity using the 2,2-diphenyl-1-picrylhydrazyl assay. The results demonstrated that the antioxidant activity of nanocomposites increased remarkably by addition of ZnO NPs. The electrical conductivity of films showed a sudden decrease for lower weight ratios of ZnO NPs (5 wt%), while it was increased gradually for higher ratios (10, 15, and 20 wt%). The nanocomposites were analyzed for antibacterial activity against Gram-positive and Gram-negative bacteria. The results indicated that the synthesized BNC is effective against all of the studied bacteria, and its effectiveness is higher for Pseudomonas aeruginosa. The thermal stability and physical properties of BNC films were increased by an increase in the weight ratio of ZnO NPs, promising novel applications for the electrically conductive polysaccharide-based nanocomposites, particularly those that may exploit the antimicrobial nature of Ppy/ZnO/CS BNCs.

Conductive polymers: towards a smart biomaterial for tissue engineering

Developing stimulus-responsive biomaterials with easy-to-tailor properties is a highly desired goal of the tissue engineering community. A novel type of electroactive biomaterial, the conductive polymer, promises to become one such material. Conductive polymers are already used in fuel cells, computer displays and microsurgical tools, and are now finding applications in the field of biomaterials. These versatile polymers can be synthesised alone, as hydrogels, combined into composites or electrospun into microfibres. They can be created to be biocompatible and biodegradable. Their physical properties can easily be optimized for a specific application through binding biologically important molecules into the polymer using one of the many available methods for their functionalization. Their conductive nature allows cells or tissue cultured upon them to be stimulated, the polymers' own physical properties to be influenced post-synthesis and the drugs bound in them released, through the application of an electrical signal. It is thus little wonder that these polymers are becoming very important materials for biosensors, neural implants, drug delivery devices and tissue engineering scaffolds. Focusing mainly on polypyrrole, polyaniline and poly(3,4-ethylenedioxythiophene), we review conductive polymers from the perspective of tissue engineering. The basic properties of conductive polymers, their chemical and electrochemical synthesis, the phenomena underlying their conductivity and the ways to tailor their properties (functionalization, composites, etc.) are discussed.