Manipulation of selective cell adhesion and growth by surface charges of electrically polarized hydroxyapatite

Biocompatibility and dimensional stability through the use of 3D-printed scaffolds made by polycaprolactone and bioglass-7: An in vitro and in vivo study

PURPOSE

This experiment aimed to observe the differences in biological properties by producing BGS-7 + PCL scaffolds with different weight fractions of BGS-7 through 3D printing and to confirm whether using the scaffold for vertical bone augmentation is effective.

MATERIALS AND METHODS

Cube-shaped bioglass (BGS-7) and polycaprolactone (PCL) scaffolds with different weight fractions (PCL alone, PCL with 15% and 30% BGS-7) are produced using 3D printing. The surface hydroxyapatite (HA) apposition, the pH change, proliferation and attachment assays, and various gene expression levels are assessed. After a 7-mm implant was inserted 3 mm into the rabbit calvaria, vertical bone augmentation is performed around the implant and inside the scaffold in four ways: scaffold only, scaffold+bone graft, bone graft only, and no graft. Sacrifice is performed at 6, 12, and 24 weeks, and the various parameters are compared radiographically and histologically.

RESULTS

HA apposition, cell proliferation, cell attachment, and expression of osteogenic genes increase as the proportion of BGS-7 increase. In the in vivo test, a higher bone-implant contact ratio, bone volume ratio, bone mineral density, and new bone area are observed when the scaffold and bone grafts were used together.

CONCLUSION

The 3D-printed scaffold, a mixture of BGS-7 and PCL, exhibit higher biological compatibility as the proportion of BGS-7 increase. Additionally, the use of scaffold is effective for vertical bone augmentation.

Decoupling the Influence of Poly(3,4-Ethylenedioxythiophene)-Collagen Composite Characteristics on Cell Stemness

Conductive polymers (CPs) are widely studied for their ability to influence a myriad of tissue systems. While their mixed ionic/electronic conductivity is commonly considered the primary driver of these benefits, the mechanisms by which CPs influence cell fate remain unclear. In this study, CP-biomaterial interactions are investigated using collagen, due to its widespread prevalence throughout the body and in tissue engineering constructs. Collagen is functionalized with both electrostatically and covalently bound derivatives of the CP poly(3,4-ethylenedioxythiophene) (PEDOT) doped via backbone-tethered sulfonate groups, which enable high solubility and loading to the collagen biomatrix. Intrinsically doped scaffolds are compared to those incorporated with a commercially available PEDOT formulation, which is complexed with polyanionic polystyrene sulfonate (PSS). Low loadings of intrinsically doped PEDOT do not increase substrate conductivity compared to collagen alone, enabling separate investigation into CP loading and conductivity. Interestingly, higher PEDOT loading bolsters human mesenchymal stromal (hMSC) cell gene expression of Oct-4 and NANOG, which are key transcription factors regulating cell stemness. Conductive collagen composites with commercial PEDOT:PSS do not significantly affect the expression of these transcription factors in hMSCs. Furthermore, it is demonstrated that PEDOT regulates cellular fate independently from physical changes to the material but directly to the loading of the polymer.

Cell-free biodegradable electroactive scaffold for urinary bladder regeneration

Tissue engineering heavily relies on cell-seeded scaffolds to support the complex biological and mechanical requirements of a target organ. However, in addition to safety and efficacy, translation of tissue engineering technology will depend on manufacturability, affordability, and ease of adoption. Therefore, there is a need to develop scalable biomaterial scaffolds with sufficient bioactivity to eliminate the need for exogenous cell seeding. Herein, we describe synthesis, characterization, and implementation of an electroactive biodegradable elastomer for urinary bladder tissue engineering. To create an electrically conductive and mechanically robust scaffold to support bladder tissue regeneration, we developed a phase-compatible functionalization method wherein the hydrophobic conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT) was polymerized in situ within a similarly hydrophobic citrate-based elastomer poly(octamethylene-citrate-co-octanol) (POCO) film. We demonstrate the efficacy of this film as a scaffold for bladder augmentation in athymic rats, comparing PEDOT-POCO scaffolds to mesenchymal stromal cell-seeded POCO scaffolds. PEDOT-POCO recovered bladder function and anatomical structure comparably to the cell-seeded POCO scaffolds and significantly better than non-cell seeded POCO scaffolds. This manuscript reports: (1) a new phase-compatible functionalization method that confers electroactivity to a biodegradable elastic scaffold, and (2) the successful restoration of the anatomy and function of an organ using a cell-free electroactive scaffold.

Combined Dextran-Graft-Polyacrylamide/Zinc Oxide Nanocarrier for Effective Anticancer Therapy in vitro

Introduction

Cancer chemotherapy faces two major challenges - high toxicity of active substances and tumor resistance to drugs. Low toxic nanocarriers in combination with anticancer agents can significantly increase the effectiveness of therapy. Modern advances in nanotechnology make it easy to create materials with the necessary physical and chemical properties.

Methods

Two hybrid nanosystems of dextran-polyacrylamide/ zinc oxide nanoparticles (D-PAA/ZnO NPs) were synthesized in aqueous solution with zinc sulphate (D-PAA/ZnO NPs (SO42-)) and zinc acetate (D-PAA/ZnO NPs (-OAc)). The light absorption, fluorescence, dynamic light scattering and transmission electron microscopy for nanocomposite characterization were used. MTT, neutral red uptake and scratch assays were selected as fibroblasts cytotoxicity assays. Cytotoxicity was tested in vitro for normal fibroblasts, MAEC, prostate (LNCaP, PC-3, DU-145) and breast (MDA-MB-231, MCF-7) cancer cells lines. Immunocytochemical methods were used for detection of Ki-67, p53, Bcl-2, Bax, e-cadherin, N-cadherin and CD44 expression. Acridine orange was used to detect morphological changes in cells.

Results

The radius of ZnO NPs (SO42-) was 1.5 nm and ZnO NPs (-OAc) was 2 nm. The nanosystems were low-toxic to fibroblasts, MAEC. Cells in the last stages of apoptosis with the formation of apoptotic bodies were detected for all investigated cancer cell lines. Proapoptotic proteins expression in cancer cells indicates an apoptotic death. Increased expression of E-cadherin and N-cadherin was registered for cancer cells line LNCaP, PC-3, DU-145 and MCF-7 after 48 h incubation with D-PAA/ZnO NPs (SO42-).

Conclusion

The nanosystems were low-toxic to fibroblasts, MAEC. The D-PAA/ZnO NPs nanosystem synthesized using zinc sulphate demonstrates high cytotoxicity due to destruction of various types of cancer cells in vitro and potentially increases adhesion between cells. Thus, our findings indicate the selective cytotoxicity of D-PAA/ZnO NPs against cancer cells and can be potentially used for cancer treatment.

Physicochemical, mechanical, dielectric, and biological properties of sintered hydroxyapatite/barium titanate nanocomposites for bone regeneration

Bone implants fabricated using nanocomposites containing hydroxyapatite (HA) and barium titanate (BT) show osteoconductive, osteoinductive, osteointegration, and piezoelectricity properties for bone regeneration applications. In our present study, HA and BT nanopowders were synthesized using high-energy ball-milling-assisted solid-state reaction with precursors of calcium carbonate and ammonium dihydrogen phosphate, and barium carbonate and titanium oxide powder mixtures, respectively. Hexagonal HA and tetragonal BT phases were formed after calcination at 700 and 1000 °C, respectively. Subsequently, hydroxyapatite/barium titanate (HA/BT) nanocomposites with different weight percentages of HA and BT were prepared by ball-milling, then compacted and sintered at two different temperatures to endow these bioceramics with better mechanical, dielectric, and biological properties for bone regeneration. Microstructure, crystal phases, and molecular structure characterizations of these sintered HA/BT nanocomposite compacts (SHBNCs) were performed using field-emission scanning electron microscopy, x-ray diffraction, and Fourier-transform infrared spectroscopy, respectively. Bulk density was evaluated using the Archimedes method. HA/BT nanocomposites with increased BT content showed enhanced dielectric properties, and the dielectric constant (ϵ_r) value for 5HA/95BT was ∼182 at 100 Hz. Mechanical properties such as Vicker's hardness, fracture toughness, yield strength, and diametral tensile strength were also investigated. The hemolysis assay of SHBNCs exhibited hemocompatibility. The effect of these SHBNCs as implants on thein vitrocytocompatibility and cell viability of MG-63 osteoblast-like cells was assessed by MTT assay and live/dead staining, respectively. 15HA/85BT showed increased metabolic activity with a higher number of live cells than BT after the culture period. Overall, the SHBNCs can be used as orthopedic implants for bone regeneration applications.

Enhanced Cell Osteogenesis and Osteoimmunology Regulated by Piezoelectric Biomaterials with Controllable Surface Potential and Charges

Bone regeneration is a well-orchestrated process involving electrical, biochemical, and mechanical multiple physiological cues. Electrical signals play a vital role in the process of bone repair. The endogenous potential will spontaneously form on defect sites, guide the cell behaviors, and mediate bone healing when the bone fracture occurs. However, the mechanism on how the surface charges of implant potentially guides osteogenesis and osteoimmunology has not been clearly revealed yet. In this study, piezoelectric BaTiO₃/β-TCP (BTCP) ceramics are prepared by two-step sintering, and different surface charges are established by polarization. In addition, the cell osteogenesis and osteoimmunology of BMSCs and RAW264.7 on different surface charges were explored. The results showed that the piezoelectric constant d₃₃ of BTCP was controllable by adjusting the sintering temperature and rate. The polarized BTCP with a negative surface charge (BTCP-) promoted protein adsorption and BMSC extracellular Ca²⁺ influx. The attachment, spreading, migration, and osteogenic differentiation of BMSCs were enhanced on BTCP-. Additionally, the polarized BTCP ceramics with a positive surface charge (BTCP+) significantly inhibited M1 polarization of macrophages, affecting the expression of the M1 marker in macrophages and changing secretion of proinflammatory cytokines. It in turn enhanced osteogenic differentiation of BMSCs, suggesting that positive surface charges could modulate the bone immunoregulatory properties and shift the immune microenvironment to one that favored osteogenesis. The result provides an alternative method of synergistically modulating cellular immunity and the osteogenesis function and enhancing the bone regeneration by fabricating piezoelectric biomaterials with electrical signals.

Dendritic Polyglycerol Amine: An Enhanced Substrate to Support Long-Term Neural Cell Culture

Long-term stable cell culture is a critical tool to better understand cell function. Most adherent cell culture models require a polymer substrate coating of poly-lysine or poly-ornithine for the cells to adhere and survive. However, polypeptide-based substrates are degraded by proteolysis and it remains a challenge to maintain healthy cell cultures for extended periods of time. Here, we report the development of an enhanced cell culture substrate based on a coating of dendritic polyglycerol amine (dPGA), a non-protein macromolecular biomimetic of poly-lysine, to promote the adhesion and survival of neurons in cell culture. We show that this new polymer coating provides enhanced survival, differentiation and long-term stability for cultures of primary neurons or neurons derived from human induced pluripotent stem cells (hiPSCs). Atomic force microscopy analysis provides evidence that greater nanoscale roughness contributes to the enhanced capacity of dPGA-coated surfaces to support cells in culture. We conclude that dPGA is a cytocompatible, functionally superior, easy to use, low cost and highly stable alternative to poly-cationic polymer cell culture substrate coatings such as poly-lysine and poly-ornithine.

Summary statement

Here, we describe a novel dendritic polyglycerol amine-based substrate coating, demonstrating superior performance compared to current polymer coatings for long-term culture of primary neurons and neurons derived from induced pluripotent stem cells.

Visualization of Ion|Surface Binding and In Situ Evaluation of Surface Interaction Free Energies via Competitive Adsorption Isotherms

Function and properties at biologic as well as technological interfaces are controlled by a complex and concerted competition of specific and unspecific binding with ions and water in the electrolyte. It is not possible to date to directly estimate by experiment the interfacial binding energies of involved species in a consistent approach, thus limiting our understanding of how interactions in complex (physiologic) media are moderated. Here, we employ a model system utilizing polymers with end grafted amines interacting with a negatively charged mica surface. We measure interaction forces as a function of the molecule density and ion concentration in NaCl solutions. The measured adhesion decreases by about 90%, from 0.01 to 1 M electrolyte concentration. We further demonstrate by molecular resolution imaging how ions increasingly populate the binding surface at elevated concentrations, and are effectively competing with the functional group for a binding site. We demonstrate that a competing Langmuir isotherm model can describe this concentration-dependent competition. Further, based on this model we can quantitatively estimate ion binding energies, as well as binding energy relationships at a complex solid|liquid interface. Our approach enables the extraction of thermodynamic interaction energies and kinetic parameters of ionic species during monolayer level interactions at a solid|liquid interface, which to-date is impossible with other techniques.

Natural Drug-Loaded Bimetal-Substituted Hydroxyapatite-Polymeric Composite for Osteosarcoma-Affected Bone Repair

Repairing segmental bone deformities after resection of dangerous bone tumors is a long-standing clinical issue. The study's main objective is to synthesize a natural bioactive compound-loaded bimetal-substituted hydroxyapatite (BM-HA)-based composite for bone regeneration. The bimetal (copper and cadmium)-substituted HAs were prepared by the sol-gel method and reinforced with biocompatible polyacrylamide (BM-HA/PAA). Umbelliferone (UMB) drug was added to the BM-HA/PAA composite to enhance anticancer activity further. The composite's formation was confirmed by various physicochemical investigations, such as FT-IR, XRD, SEM, EDAX, and HR-TEM techniques. The bioactivity was assessed by immersing the sample in simulated body fluid for 1, 3, and 7 days. The zeta potential values of BM-HA/PAA and BM-HA/PAA/UMB are -36.4 mV and -49.4 mV, respectively. The in vitro viability of the prepared composites was examined in mesenchymal stem cells (MSCs). It shows the ability of the composite to produce osteogenic bone regeneration without any adverse effects. From the gene expression and PCR results, the final UMB-loaded composite induced osteogenic markers, such as Runx, OCN, and VEFG. The prepared bimetal substituted polyacrylamide reinforced HA composite loaded with UMB drug has the ability for bone repair/regenerations.

Amorphous-Crystalline Calcium Phosphate Coating Promotes In Vitro Growth of Tumor-Derived Jurkat T Cells Activated by Anti-CD2/CD3/CD28 Antibodies

A modern trend in traumatology, orthopedics, and implantology is the development of materials and coatings with an amorphous-crystalline structure that exhibits excellent biocopatibility. The structure and physico-chemical and biological properties of calcium phosphate (CaP) coatings deposited on Ti plates using the micro-arc oxidation (MAO) method under different voltages (200, 250, and 300 V) were studied. Amorphous, nanocrystalline, and microcrystalline statesof CaHPO4 and β-Ca2P2O7 were observed in the coatings using TEM and XRD. The increase in MAO voltage resulted in augmentation of the surface roughness Ra from 2.5 to 6.5 µm, mass from 10 to 25 mg, thickness from 50 to 105 µm, and Ca/P ratio from 0.3 to 0.6. The electrical potential (EP) of the CaP coatings changed from -456 to -535 mV, while the zeta potential (ZP) decreased from -53 to -40 mV following an increase in the values of the MAO voltage. Numerous correlations of physical and chemical indices of CaP coatings were estimated. A decrease in the ZP magnitudes of CaP coatings deposited at 200-250 V was strongly associated with elevated hTERT expression in tumor-derived Jurkat T cells preliminarily activated with anti-CD2/CD3/CD28 antibodies and then contacted in vitro with CaP-coated samples for 14 days. In turn, in vitro survival of CD4+ subsets was enhanced, with proinflammatory cytokine secretion of activated Jurkat T cells. Thus, the applied MAO voltage allowed the regulation of the physicochemical properties of amorphous-crystalline CaP-coatings on Ti substrates to a certain extent. This method may be used as a technological mechanism to trigger the behavior of cells through contact with micro-arc CaP coatings. The possible role of negative ZP and Ca2+ as effectors of the biological effects of amorphous-crystalline CaP coatings is discussed. Micro-arc CaP coatings should be carefully tested to determine their suitability for use in patients with chronic lymphoid malignancies.

Alloplastic Bone Substitutes for Periodontal and Bone Regeneration in Dentistry: Current Status and Prospects

Various bone graft products are commercially available worldwide. However, there is no clear consensus regarding the appropriate bone graft products in different clinical situations. This review is intended to summarize bone graft products, especially alloplastic bone substitutes that are available in multiple countries. It also provides dental clinicians with detailed and accurate information concerning these products. Furthermore, it discusses the prospects of alloplastic bone substitutes based on an analysis of the current market status, as well as a comparison of trends among countries. In this review, we focus on alloplastic bone substitutes approved in the United States, Japan, and Korea for use in periodontal and bone regeneration. According to the Food and Drug Administration database, 87 alloplastic bone graft products have been approved in the United States since 1996. According to the Pharmaceuticals and Medical Devices Agency database, 10 alloplastic bone graft products have been approved in Japan since 2004. According to the Ministry of Health and Welfare database, 36 alloplastic bone graft products have been approved in Korea since 1980. The approved products are mainly hydroxyapatite, β-tricalcium phosphate, and biphasic calcium phosphate. The formulations of the products differed among countries. The development of new alloplastic bone products has been remarkable. In the near future, alloplastic bone substitutes with safety and standardized quality may be the first choice instead of autologous bone; they may offer new osteoconductive and osteoinductive products with easier handling form and an adequate resorption rate, which can be used with growth factors and/or cell transplantation. Careful selection of alloplastic bone graft products is necessary to achieve predictable outcomes according to each clinical situation.

Improved antibacterial and cellular response of electrets and piezobioceramics

The bacterial contamination in implants has been recognized as one of the key issues in orthopedics. In this article, a new technique of electrical polarization of various non-piezoelectric and piezoelectric biocompatible ceramics has been explored to develop antibacterial implants. Optimally processed hydroxyapatite (HA), BaTiO₃ (BT), CaTiO₃ (CT), Na_0.5K_0.5NbO₃ (NKN) and their composites have been used as model biomaterials to verify the concept. The phase evolution analyses and microstructural characterizations were performed for sintered samples. The samples were polarized at polarizing voltage and temperature of 20 kV and 500°C, respectively, for 30 min. The hydrophilicity of polarized surfaces was examined using deionized water and culture media. The polarization induced in-vitro antibacterial study was performed for both, gram positive and gram negative bacteria. The viability of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria reduces significantly on the polarized surfaces. In addition, the influence of polarization on antibacterial response has been explored via various mechanisms such as development of reactive oxygen species (ROS), catalase activity and lipoperoxidation. Furthermore, the cellular response of polarized surfaces was also examined using SaOS2 and MG-63 cells. The viability of SaOS2 and MG-63 cells was observed to increase significantly on negatively polarized surfaces. Overall, the surface treatment enhances the antibacterial response of HA, NKN, BT, CT and their composites surfaces with positive influence on cellular response.

Impact of Dopants on the Electrical and Optical Properties of Hydroxyapatite

This chapter deals with the effect of alternating electrical current on hydroxyapatite [HAp, Ca10(PO4)6(OH)2] and doped HAp along with their optical response and the processes involved. The dielectric constant, permittivity and ac conductivity were analyzed to have an insight into the surface charge polarization phenomenon. Further, the magnitude and the polarity of the surface charges, microstructure, and phases also play significant role in the cell proliferation and growth on the implants. Besides, the mechanism behind the electrical properties and the healing of bone fracture are discussed. The influence of various dopants on the optical properties of HAp viz., absorbance, transmission, band gaps and defects energy levels are analyzed along with the photoluminescence and excitation independent emission. In the future outlook, the analysis of effect of doping is summarized and its impact on the next generation biomaterials are elucidated.

Interplay between surface chemistry and osteogenic behaviour of sulphate substituted nano-hydroxyapatite

Surface potential and chemical compositions of the bioceramics are the core of therapeutic effect and are key factors to trigger the interfacial interactions with surrounding hard and soft tissues to repair and regeneration. Ionic substitution in hydroxyapatite (Hap) lattice significantly influences the zeta potential from -16.46 ± 0.66 mV to -6.01 ± 0.68 mV as well as an average nano-rod length from ~40 nm to ~26 nm with respect to SO₄^2- ion content. Moreover, the surface chemistry of Hap is mainly inter-related to SO₄^2- substitution rate at PO₄^2- site. Specifically, nano-sized feature with lowered negative surface potential influences the protein adsorption via their weak repulsive or attractive forces. Bovine serum albumin (BSA) and lysozyme (LSZ) adsorption studies confirmed the increased affinity to active binding sites of Hap's surface. Further, SO₄^2- ion substituted Hap (SNHA) showed improved in vitro biomineralization activity and alkaline phosphatase activity. Expression of osteogenic biomarkers such as collagen I, V, osteopontin and osteocalcin were evaluated in Saos-2 and MC3T3-E1 cells. Gene expression of these markers was influenced by SO₄^2- ion content in Hap (maximum with 10SNHA). Altogether, these data emphasizes that chemical composition and surface properties are dominant aspect in bioceramic development towards bone regeneration.

Structural and Chemical Hierarchy in Hydroxyapatite Coatings

Hydroxyapatite coatings need similarly shaped splats as building blocks and then a homogeneous microstructure to unravel the structural and chemical hierarchy for more refined improvements to implant surfaces. Coatings were thermally sprayed with differently sized powders (20–40, 40–63 and 63–80 µm) to produce flattened homogeneous splats. The surface was characterized for splat shape by profilometry and Atomic force microscopy (AFM), crystal size by AFM, crystal orientation by X-ray diffraction (XRD) and structural variations by XRD. Chemical composition was assessed by phase analysis, but variations in chemistry were detected by XRD and Raman spectroscopy. The resulting surface electrical potential was measured by Kelvin probe AFM. Five levels of structural hierarchy were suggested: the coating, the splat, oriented crystals, alternate layers of oxyapatite and hydroxyapatite (HAp) and the suggested anion orientation. Chemical hierarchy was present over a lower range of order for smaller splats. Coatings made from smaller splats exhibited a greater electrical potential, inferred to arise from oxyapatite, and supplemented by ordered OH⁻ ions in a rehydroxylated surface layer. A model has been proposed to show the influence of structural hierarchy on the electrical surface potential. Structural hierarchy is proposed as a means to further refine the properties of implant surfaces.

Antibacterial and cellular response of piezoelectric Na0.5K0.5NbO3modified 1393 bioactive glass

In the present study, the combined effect of addition of varying concentrations (10-30 vol%) of biocompatible piezoelectric Na_0.5K_0.5NbO₃ (NKN) as well as electrostatic and dynamic pulsed electrical treatment on antibacterial and cellular response of 1393 bioactive glass (1393 BG) has been examined. The phase analyses of the sintered (at 800 °C for 30 min) samples revealed the formation of 1393 BG - NKN composites without any appearance of secondary phases. The addition of 10-30 vol% NKN significantly improved the mechanical behaviour of 1393 BG like, hardness (1.7 to 2 times), fracture toughness (1.3 to 2.6 times), compressive (2.3 to 8 times) and flexural strengths (2 to 3.5 times) than monolithic 1393 BG. The piezoelectric NKN is observed to induce the antibacterial activity in 1393 BG - (10- 30 vol%) NKN composites, while Staphylococcus aureus (S. aureus, gram positive) and Escherichia coli (E. coli, gram negative) bacterial cells were exposed to unpolarized and polarized (20 kV, 500°C for 30 min) sample surfaces. The antibacterial response was examined using disc diffusion, nitro blue tetrazolium (NBT) and MTT assays. The statistical analyses revealed the significant reduction in the viability of bacterial cells on polarized 1393 BG - (10- 30 vol%) NKN composite samples. In addition, the combined effect of electrostatic and dynamic pulsed electrical stimulation (1 V/cm, 500 μs pulses) on the cellular response of 1393 BG and 1393 BG - 30 vol% NKN composites has been analysed with MG-63 osteoblast-like cells. The cell proliferation was observed to increase significantly for the dynamic pulsed electric field treated negatively charged surfaces.

Preliminary studies of the effect of doping of chromium oxide in SiO2-CaO-P2O5 bioceramics for bone regeneration applications

Bioceramics of composition xCr₂O₃∙(43-x) CaO∙42SiO₂∙15P₂O₅ (x varying from 0 to 8 mol%) have been synthesized in the laboratory by using sol-gel technique. The morphology and structure has been determined by using Powder X-ray Diffraction, Fourier Transform Infrared and Raman spectroscopy and Field Emission Scanning Electron Microscopy. The in vitro bio mineralization behavior has been assessed by immersion in simulated body fluid for 7 days. The results obtained in our studies have indicated excellent hydroxyapatite formation ability of our samples. Drug delivery property of synthesized samples has been checked by using UV-spectroscopy of antibiotic 'gentamicin'. The in vitro drug release profile was fitted best in the Higuchi model with the highest value of coefficient of determination (R² = 0.9970). Antimicrobial properties have been evaluated from minimum inhibitory concentration and time kill assay values. The cellular response has been investigated by using human osteosarcoma MG 63 cell line. Also to check charge on the synthesized samples, Zeta potential studies have been conducted and it has been observed that samples carry negative charge when immersed in simulated body fluid. Negative surface charge provide suitable environment for cell adhesion and proliferation. Experiments have been undertaken to explore suitable composition with an objective of development of suitable implant material for bone regeneration applications.

Carbon nanotubes: An effective platform for biomedical electronics

Cylindrical fullerenes (or carbon nanotubes (CNTs)) have been extensively investigated as potential sensor platforms due to effective and practical manipulation of their physical and chemical properties by functionalization/doping with chemical groups suitable for novel nanocarrier systems. CNTs play a significant role in biomedical applications due to rapid development of synthetic methods, structural integration, surface area-controlled heteroatom doping, and electrical conductivity. This review article comprehensively summarized recent trends in biomedical science and technologies utilizing a promising nanomaterial of CNTs in disease diagnosis and therapeutics, based on their biocompatibility and significance in drug delivery, implants, and bio imaging. Biocompatibility of CNTs is essential for designing effective and practical electronic applications in the biomedical field particularly due to their growing potential in the delivery of anticancer agents. Furthermore, functionalized CNTs have been shown to exhibit advanced electrochemical properties, responsible for functioning of numerous oxidase and dehydrogenase based amperometric biosensors. Finally, faster signal transduction by CNTs allows charge transfer between underlying electrode and redox centres of biomolecules (enzymes).

Pyro-Electrification of Freestanding Polymer Sheets: A New Tool for Cation-Free Manipulation of Cell Adhesion in vitro

Localized electric fields have become, in recent years, a source of inspiration to researchers and laboratories thanks to a huge amount of applications derived from it, including positioning of microparticles as building blocks for electrical, optical, and magnetic devices. The possibility of producing polymeric materials with surface charge thus opens new perspectives for applications where process simplicity and cost-effectiveness of flexible electronics are of fundamental importance. In particular, the influence of surface charges is widely studied and is a critical issue especially when new materials and functional technologies are introduced. Here, we report a voltage-free pyro-electrification (PE) process able to induce a permanent dipole orientation into polymer sheets under both mono- and bipolar distribution. The technique makes use of the pyroelectric effect for generating electric potentials on the order of kilovolts by an easy-to-accomplish thermal treatment of ferroelectric lithium niobate (LN) crystals. The PE allows us to avoid the expensive and time-consuming fabrication of high-power electrical circuits, as occurs in traditional generator-based techniques. Since the technique is fully compatible with spin-coating-based procedures, the pyro-electrified polymer sheets are easily peeled off the surface of the LN crystal after PE completion, thus providing highly stable and freestanding charged sheets. We show the reliability of the technique for different polymers and for different applications ranging from live cell patterning to biofilm formation tests for bacteria linked to food-processing environments.

Effect of Biomaterial Electrical Charge on Bone Morphogenetic Protein-2-Induced In Vivo Bone Formation

IMPACT STATEMENT

Biomaterials can play a dual role in bone regeneration: they enable local sustained delivery of growth factors, such as bone morphogenetic protein-2 (BMP-2), while they provide structural support as scaffold. By better imitating the properties of native bone tissue, scaffolds may be both osteoconductive and osteoinductive. The latter can be achieved by modifying the electrical charge of the surface. The present work uses tunable oligo[(polyethylene glycol) fumarate] hydrogel and demonstrates that negative charge enhances BMP-2-induced bone formation compared with neutral or positive charge. Altogether, this indicates that tissue-specific surface charge modifications of biomaterials hold great promise in the field of tissue regeneration.

Hydrogel hybrid porcine pericardium for the fabrication of a pre-mounted TAVI valve with improved biocompatibility

Transcatheter aortic valve implantation (TAVI) has been developed years ago for patients who cannot undergo a surgical aortic valve replacement (SAVR). Although TAVI possesses the advantages of lower trauma and simpler manipulation compared to SAVR, the need for storage in glutaraldehyde (GLU) and a tedious intraoperative assembly process have caused great inconvenience for its further application. A pre-mounted TAVI valve assembled by mounting a dry valve frame to a delivery system is expected to address these problems. However, the currently used GLU treated leaflet cannot unfold normally after being crimped for a long-term and loses its function when the BHV is assembled to the catheter. Besides, its cytotoxicity and immune response after implantation are still problems to be solved. In the present study, a hydrogel hybrid porcine pericardium (HHPP) approach was developed to endow the BHVs with a favorable unfolding property and good biocompatibility. Three monomers with different charge characteristics (sodium acrylate, 2-methacryloyloxyethyl phosphorylcholine, and acryloyloxyethyltrimethyl ammonium chloride) were complexed with GLU treated PP (GLU-PP) to form three kinds of HHPPs (SAAH-PP, MPCH-PP, and DACH-PP). The results of the crimping simulation experiment showed that all HHPPs could quickly recover in PBS after being folded for 10 days, while the traditional BHVs (GLU-PP) could not recover under the same conditions. Bovine serum albumin adsorption and platelet adhesion test showed that SAAH-PP and MPCH-PP had good anti-adhesion abilities. A cell culture study indicated that all the three HHPPs promoted HUVEC growth and proliferation. In vivo biocompatibility studies showed that the immune response induced by MPCH-PP was reduced compared to that by GLU-PP. These studies demonstrated that the strategy of MPC hydrogel hybridization may be an effective approach to prepare a pre-mounted TAVI valve with improved biocompatibility.

Insights into the apatite mineralization potential of thermally processed nanocrystalline Ca10−xFex(PO4)6(OH)2

The thermal treatment of Ca_10−xFe_x(PO₄)₆(OH)₂ at different temperatures had an effect on the mineralization potential under non-cellular and cellular conditions by releasing its bioactive ions at optimal or excessive levels.

Single-Chain Atomic Crystals as Extracellular Matrix-Mimicking Material with Exceptional Biocompatibility and Bioactivity

In this study, Mo₃Se₃^- single-chain atomic crystals (SCACs) with atomically small chain diameters of ∼0.6 nm, large surface areas, and mechanical flexibility were synthesized and investigated as an extracellular matrix (ECM)-mimicking scaffold material for tissue engineering applications. The proliferation of L-929 and MC3T3-E1 cell lines increased up to 268.4 ± 24.4% and 396.2 ± 8.1%, respectively, after 48 h of culturing with Mo₃Se₃^- SCACs. More importantly, this extremely high proliferation was observed when the cells were treated with 200 μg mL^-1 of Mo₃Se₃^- SCACs, which is above the cytotoxic concentration of most nanomaterials reported earlier. An ECM-mimicking scaffold film prepared by coating Mo₃Se₃^- SCACs on a glass substrate enabled the cells to adhere to the surface in a highly stretched manner at the initial stage of cell adhesion. Most cells cultured on the ECM-mimicking scaffold film remained alive; in contrast, a substantial number of cells cultured on glass substrates without the Mo₃Se₃^- SCAC coating did not survive. This work not only proves the exceptional biocompatible and bioactive characteristics of the Mo₃Se₃^- SCACs but also suggests that, as an ECM-mimicking scaffold material, Mo₃Se₃^- SCACs can overcome several critical limitations of most other nanomaterials.

On the electrical conductivity of alginate hydrogels

Hydrogels have been extensively used in the field of biomedical applications, offering customizable natural, synthetic or hybrid materials, particularly relevant in the field of tissue engineering. In the bioelectronics discipline, hydrogels are promising mainly as sensing platforms with or without encapsulated cells, showing great potential in healthcare and medicine. However, to date there is little data in the literature which characterizes the electrical properties of tissue engineering materials which are relevant to bioelectronics. In this work, we present electrical characterization of alginate hydrogels, a natural polysaccharide, using a four-probe method similar to electrical impedance spectroscopy. The acquired conductance data show distinct frequency-dependent features that change as a function of alginate and crosslinker concentration reflecting ion kinetics inside the measured sample. Furthermore, the presence of NIH 3T3 fibroblasts encapsulated in the hydrogels matrix was found to alter the artificial tissue's electrical properties. The method used provides valuable insight to the frequency-dependent electrical response of the resulting systems. It is hoped that the outcome of this research will be of use in the development of cell/electronic interfaces, possibly toward diagnostic biosensors and therapeutic bioelectronics.

Smart Injectable Self-Setting Monetite Based Bioceramics for Orthopedic Applications

The present study is the first of its kind dealing with the development of a specific bioceramic which qualifies as a potential material in hard-tissue replacements. Specifically, we report the synthesis and evaluation of smart injectable calcium phosphate bone cement (CPC) which we believe will be suitable for various kinds of orthopedic and spinal-fusion applications. The smart nature of this next generation orthopedic implant is attained by incorporating piezoelectric barium titanate (BT) particles into monetite-based (dicalcium phosphate anhydrous, DCPA) CPC composition. The main goal is to take advantage of the piezoelectric properties of BT, as electromechanical effect plays a vital role in fracture healing at the defect site and bone integration with the implant. Furthermore, radiopacity of BT would help in easy detection of the CPC presence at the fracture site during surgery. Results reveal that BT addition favors important properties of bone cement such as good compressive strength, injectability, bioactivity, biocompatibility, and even washout resistance. Most importantly, the self-setting nature of the bone cements are not compromised with BT incorporation. The in vitro results confirm that the developed bone-cement abides by the standard orthopedic requirements making it apt for real-time prosthetic materials.

Mesoporous and hollow hydroxyapatite nanostructured particles as a drug delivery vehicle for the local release of ibuprofen

The high risk of infection caused by implantation of orthopedic bio-metals is still a daunting challenge for surgeons as it can lead to implant failure. One approach to overcome this issue is the local release of antibacterial drug through coating on the surface of a metallic implant. One ideal carrier for this purpose is hydroxyapatite (HA) particles which are bioactive, biodegradable, biocompatible and have the potential to bond to bone. In the current study, highly crystalline mesoporous HA nanostructure particles were successfully synthesized in a low-temperature solvent process with the aid of an inorganic CaCO₃ template and then fully characterized. The specific surface area and the average size of the cavities of the nanostructured mesoporous HA particles were 85 m²/g and 20 nm, respectively. The feasibility of the prepared HA mesoporous nanostructures for drug delivery, using ibuprofen as a model drug, was also investigated. The as-prepared HA mesoporous nanostructures showed a high drug-loading capacity, as well as sustained drug release in a phosphate buffered saline (PBS) at a pH of 7.4. Overall, results show that HA mesoporous nanostructures gave great potential in bone regeneration and local delivery of either drugs or biomolecules.

Ultrananocrystalline diamond-coated nanoporous membranes support SK-N-SH neuroblastoma epithelial [corrected] cell attachment

Ultrananocrystalline diamond (UNCD) has been demonstrated to have attractive features for biomedical applications and can be combined with nanoporous membranes for applications in drug delivery systems, biosensing, immunoisolation and single molecule analysis. In this study, free-standing nanoporous UNCD membranes with pore sizes of 100 or 400 nm were fabricated by directly depositing ultrathin UNCD films on nanoporous silicon nitride membranes and then etching away silicon nitride using reactive ion etching. Successful deposition of UNCD on the substrate with a novel process was confirmed with Raman spectroscopy, X-ray photoelectron spectroscopy, cross-section scanning electron microscopy (SEM) and transmission electron microscopy. Both sample types exhibited uniform geometry and maintained a clear hexagonal pore arrangement. Cellular attachment of SK-N-SH neuroblastoma endothelial cells was examined using confocal microscopy and SEM. Attachment of SK-N-SH cells onto UNCD membranes on both porous regions and solid surfaces was shown, indicating the potential use of UNCD membranes in biomedical applications such as biosensors and tissue engineering scaffolds.

Piezoelectric materials as stimulatory biomedical materials and scaffolds for bone repair

The process of bone repair and regeneration requires multiple physiological cues including biochemical, electrical and mechanical - that act together to ensure functional recovery. Myriad materials have been explored as bioactive scaffolds to deliver these cues locally to the damage site, amongst these piezoelectric materials have demonstrated significant potential for tissue engineering and regeneration, especially for bone repair. Piezoelectric materials have been widely explored for power generation and harvesting, structural health monitoring, and use in biomedical devices. They have the ability to deform with physiological movements and consequently deliver electrical stimulation to cells or damaged tissue without the need of an external power source. Bone itself is piezoelectric and the charges/potentials it generates in response to mechanical activity are capable of enhancing bone growth. Piezoelectric materials are capable of stimulating the physiological electrical microenvironment, and can play a vital role to stimulate regeneration and repair. This review gives an overview of the association of piezoelectric effect with bone repair, and focuses on state-of-the-art piezoelectric materials (polymers, ceramics and their composites), the fabrication routes to produce piezoelectric scaffolds, and their application in bone repair. Important characteristics of these materials from the perspective of bone tissue engineering are highlighted. Promising upcoming strategies and new piezoelectric materials for this application are presented.

STATEMENT OF SIGNIFICANCE

Electrical stimulation/electrical microenvironment are known effect the process of bone regeneration by altering the cellular response and are crucial in maintaining tissue functionality. Piezoelectric materials, owing to their capability of generating charges/potentials in response to mechanical deformations, have displayed great potential for fabricating smart stimulatory scaffolds for bone tissue engineering. The growing interest of the scientific community and compelling results of the published research articles has been the motivation of this review article. This article summarizes the significant progress in the field with a focus on the fabrication aspects of piezoelectric materials. The review of both material and cellular aspects on this topic ensures that this paper appeals to both material scientists and tissue engineers.

Modulating Surface Potential by Controlling the β Phase Content in Poly(vinylidene fluoridetrifluoroethylene) Membranes Enhances Bone Regeneration

Bioelectricity plays a vital role in living organisms. Although electrical stimulation is introduced in the field of bone regeneration, the concept of a dose-response relationship between surface potential and osteogenesis is not thoroughly studied. To optimize the osteogenic properties of different surface potentials, a flexible piezoelectric membrane, poly(vinylidene fluoridetrifluoroethylene) [P(VDF-TrFE)], is fabricated by annealing treatment to control its β phases. The surface potential and piezoelectric coefficients (d₃₃ ) of the membranes can be regulated by increasing β phase contents. Compared with d₃₃  = 20 pC N^-1 (surface potential = -78 mV) and unpolarized membranes, bone marrow mesenchymal stem cells (BM-MSCs) cultured on the d₃₃  = 10 pC N^-1 (surface potential = -53 mV) membranes have better osteogenic properties. In vivo, d₃₃  = 10 pC N^-1 membranes result in rapid bone regeneration and complete mature bone-structure formation. BM-MSCs on d₃₃  = 10 pC N^-1 membranes have the lowest reactive oxygen species level and the highest mitochondrial membrane electric potential, implying that these membranes provide the best electrical qunantity for BM-MSCs' proliferation and energy metabolism. This study establishes an effective method to control the surface potential of P(VDF-Trfe) membranes and highlights the importance of optimized electrical stimulation in bone regeneration.

Fabrication and optimization of Nanodiamonds-composited poly(ε-caprolactone) fibrous matrices for potential regeneration of hard tissues

Background

Electrospun fibrous matrices are of great importance for tissue engineering and drug delivery device. However, relatively low mechanical strength of the fibrous matrix is one of the major disadvantages. NDs with a positive charge were selected to enhance the mechanical property of a composited fibrous matrix by inducing the intermolecular interaction between NDs and polymer chain. We prepared ND-composited poly (ε-caprolactone) (PCL) fibrous matrices by electrospinning and evaluated their performance in terms of mechanical strength and cell behaviors.

Methods

A predetermined amounts of NDs (0.5, 1, 2 and 3 wt%) were added into PCL solution in a mixture of chloroform and 2,2,2-trifluoroethanol (8:2). ND-composited PCL (ND/PCL) fibrous matrices were prepared by electrospinning method. The tensile properties of the ND/PCL fibrous matrices were analyzed by using a universal testing machine. Mouse calvaria-derived preosteoblast (MC3T3-E1) was used for cell proliferation, alkaline phosphatase (ALP) assay, and Alizarin Red S staining.

Results

The diameters of the fibrous matrices were adjusted to approximately 1.8 μm by changing process variables. The intermolecular interaction between NDs and PCL polymers resulted in the increased tensile strength and the favorable interfacial adhesion in the ND/PCL fibrous matrices. The ND/PCL fibrous matrix with 1 wt% of ND had the highest tensile strength among the samples and also improved proliferation and differentiation of MC3T3-E1 cells.

Conclusions

Compared to the other samples, the ND/PCL fibrous matrix with 1 wt% of ND concentration exhibited superior performances for MC3T3 cells. The ND/PCL fibrous matrix can be potentially used for bone and dental tissue engineering.

Surface functionalisation of nanodiamonds for human neural stem cell adhesion and proliferation

Biological systems interact with nanostructured materials on a sub-cellular level. These interactions may govern cell behaviour and the precise control of a nanomaterial's structure and surface chemistry allow for a high degree of tunability to be achieved. Cells are surrounded by an extra-cellular matrix with nano-topographical properties. Diamond based materials, and specifically nanostructured diamond has attracted much attention due to its extreme electrical and mechanical properties, chemical inertness and biocompatibility. Here the interaction of nanodiamond monolayers with human Neural Stem Cells (hNSCs) has been investigated. The effect of altering surface functionalisation of nanodiamonds on hNSC adhesion and proliferation has shown that confluent cellular attachment occurs on oxygen terminated nanodiamonds (O-NDs), but not on hydrogen terminated nanodiamonds (H-NDs). Analysis of H and O-NDs by Atomic Force Microscopy, contact angle measurements and protein adsorption suggests that differences in topography, wettability, surface charge and protein adsorption of these surfaces may underlie the difference in cellular adhesion of hNSCs reported here.

Calcium Silicate Improved Bioactivity and Mechanical Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Scaffolds

The poor bioactivity and mechanical properties have restricted its biomedical application, although poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) had good biocompatibility and biodegradability. In this study, calcium silicate (CS) was incorporated into PHBV for improving its bioactivity and mechanical properties, and the porous PHBV/CS composite scaffolds were fabricated via selective laser sintering (SLS). Simulated body fluid (SBF) immersion tests indicated the composite scaffolds had good apatite-forming ability, which could be mainly attributed to the electrostatic attraction of negatively charged silanol groups derived from CS degradation to positively charged calcium ions in SBF. Moreover, the compressive properties of the composite scaffolds increased at first, and then decreased with increasing the CS content, which was ascribed to the fact that CS of a proper content could homogeneously disperse in PHBV matrix, while excessive CS would form continuous phase. The compressive strength and modulus of composite scaffolds with optimal CS content of 10 wt % were 3.55 MPa and 36.54 MPa, respectively, which were increased by 41.43% and 28.61%, respectively, as compared with PHBV scaffolds. Additionally, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay indicated MG63 cells had a higher proliferation rate on PHBV/CS composite scaffolds than that on PHBV. Alkaline phosphatase (ALP) staining assay demonstrated the incorporation of CS significantly promoted osteogenic differentiation of MG63 cells on the scaffolds. These results suggest that the PHBV/CS composite scaffolds have the potential in serving as a substitute in bone tissue engineering.

Cell Adhesion and Proliferation on Sulfonated and Non-Modified Chitosan Films

Three types of chitosan-based films have been prepared and evaluated: a non-modified chitosan film bearing cationizable aliphatic amines and two films made of N-sulfopropyl chitosan derivatives bearing both aliphatic amines and negative sulfonate groups at different ratios. Cell adhesion and proliferation on chitosan films of C2C12 pre-myoblastic cells and B16 cells as tumoral model have been tested. A differential cell behavior has been observed on chitosan films due to their different surface modification. B16 cells have shown lower vinculin expression when cultured on sulfonated chitosan films. This study shows how the interaction among cells and material surface can be modulated by physicochemical characteristics of the biomaterial surface, altering tumoral cell adhesion and proliferation processes.

Fabrication of Biocompatible Potassium Sodium Niobate Piezoelectric Ceramic as an Electroactive Implant

The discovery of piezoelectricity in natural bone has attracted extensive research in emulating biological electricity for various tissue regeneration. Here, we carried out experiments to build biocompatible potassium sodium niobate (KNN) ceramics. Then, influence substrate surface charges on bovine serum albumin (BSA) protein adsorption and cell proliferation on KNN ceramics surfaces was investigated. KNN ceramics with piezoelectric constant of ~93 pC/N and relative density of ~93% were fabricated. The adsorption of protein on the positive surfaces (Ps) and negative surfaces (Ns) of KNN ceramics with piezoelectric constant of ~93 pC/N showed greater protein adsorption capacity than that on non-polarized surfaces (NPs). Biocompatibility of KNN ceramics was verified through cell culturing and live/dead cell staining of MC3T3. The cells experiment showed enhanced cell growth on the positive surfaces (Ps) and negative surfaces (Ns) compared to non-polarized surfaces (NPs). These results revealed that KNN ceramics had great potential to be used to understand the effect of surface potential on cells processes and would benefit future research in designing piezoelectric materials for tissue regeneration.

Fabrication and in vitro biological properties of piezoelectric bioceramics for bone regeneration

The piezoelectric effect of biological piezoelectric materials promotes bone growth. However, the material should be subjected to stress before it can produce an electric charge that promotes bone repair and reconstruction conducive to fracture healing. A novel method for in vitro experimentation of biological piezoelectric materials with physiological load is presented. A dynamic loading device that can simulate the force of human motion and provide periodic load to piezoelectric materials when co-cultured with cells was designed to obtain a realistic expression of piezoelectric effect on bone repair. Hydroxyapatite (HA)/barium titanate (BaTiO₃) composite materials were fabricated by slip casting, and their piezoelectric properties were obtained by polarization. The d₃₃ of HA/BaTiO₃ piezoelectric ceramics after polarization was 1.3 pC/N to 6.8 pC/N with BaTiO₃ content ranging from 80% to 100%. The in vitro biological properties of piezoelectric bioceramics with and without cycle loading were investigated. When HA/BaTiO₃ piezoelectric bioceramics were affected by cycle loading, the piezoelectric effect of BaTiO₃ promoted the growth of osteoblasts and interaction with HA, which was better than the effect of HA alone. The best biocompatibility and bone-inducing activity were demonstrated by the 10%HA/90%BaTiO₃ piezoelectric ceramics.

In vitro characterisation of a sol-gel derived in situ silica-coated silicate and carbonate co-doped hydroxyapatite nanopowder for bone grafting

Design and synthesis of materials with better properties and performance are essential requirements in the field of biomaterials science that would directly improve patient quality of life. For this purpose, in situ silica-coated silicate and carbonate co-doped hydroxyapatite (Sc/S.C.HA) nanopowder was synthesized via the sol-gel method. Characterisation of the prepared nanopowder was carried out by XRD, FTIR, TEM, SEM, EDX, ICP, zeta potential, acid dissolution test, and cell culture test. The substitution of the silicate and carbonate ions into hydroxyapatite structure was confirmed by FTIR analysis. XRD analysis showed that silica is an amorphous phase, which played a role in covering the surface of the S.C.HA nanoparticles as confirmed by acid dissolution test. Low thickness and low integrity of the amorphous silica surface layer facilitated ions release from S.C.HA nanoparticles into physiological saline solution. Zeta potential of the prepared nanopowder suspended in physiological saline solution was -27.3±0.2mV at pH7.4. This negatively charged surface, due to the presence of amorphous silica layer upon the S.C.HA nanoparticles, not only had an accelerating effect on in vitro biomineralization of apatite, but also had a positive effect on cell attachment.

Histomorphometric analysis of maxillary sinus augmentation with calcium phosphate nanocrystal-coated xenograft

OBJECTIVE

The purpose of this study was to evaluate the histomorphometric result from maxillary sinus augmentation with calcium phosphate nanocrystal-coated bovine bone (Biocera).

STUDY DESIGN

Maxillary sinus augmentations were performed on 10 patients with the delayed placement of implants. The lateral bony window was created using a piezoelectric saw, and the sinus membrane was elevated to make a new compartment. Biocera was grafted. The bony window was repositioned over the bone graft. In all cases, samples were taken for biopsy at the time of implant placement, 6 to 8 months after the grafting procedure.

RESULTS

None of the 10 patients had complications, and there were no clinical and radiographic signs of infection. Histomorphometrically, 25.94% (± 11.24%) of newly formed bone, 52.67% (± 12.60%) of soft tissue, and 21.38% (± 10.76%) of residual grafts were shown. Histologic findings showed newly formed bone surrounding the residual grafted particles, without inflammation. Newly formed bone along inner surface of the repositioned bony window area showed more mature and dense bone structure than new bone formed along bone graft.

CONCLUSION

The present study revealed that calcium phosphate nanocystal-coated xenograft was considered to be a suitable bone graft material for maxillary sinus augmentation.

Comparison of two kinds of bovine bone in maxillary sinus augmentation: a histomorphometric study

PURPOSE

The purpose of this study was to compare the histomorphometric from sinus augmentation with calcium-phosphate nanocrystal-coated bovine bone (Biocera) and anorganic bovine bone matrix (Bio-Oss).

MATERIALS AND METHODS

Bilateral maxillary sinus augmentations were performed on 5 patients with delayed placement of implants. The lateral bony window was created using a piezoelectric saw, and the sinus membrane was elevated to make a new compartment. Bio-Oss was grafted in one sinus as the control group and Biocera was grafted in the opposite sinus as the test group. The bony window was repositioned over the bone graft. In all cases, samples were taken for biopsy at the time of implant placement, 6 to 8 months after the grafting procedure. Independent t tests were used to examine between-group differences.

RESULTS

None of the 5 patients had complications during healing period. Histomorphometrically, the Bio-Oss group showed 28.46% (±5.28%) of newly formed bone. Biocera group showed 29.94% (±8.72%) of newly formed bone. Newly formed bone along inner surface of repositioned bony window area showed more mature and dense bone structure than new bone formed along bone graft.

CONCLUSIONS

This study revealed that both bovine bone grafts were considered as suitable bone graft materials for maxillary sinus augmentation.

Collagen-based silver nanoparticles: Study on cell viability, skin permeation, and swelling inhibition

Collagen is considered the most abundant protein in the animal kingdom, comprising 30% of the total amount of proteins and 6% of the human body by weight. Studies that examine the interaction between silver nanoparticles and proteins have been highlighted in the literature in order to understand the stability of the nanoparticle system, the effects observed in biological systems, and the appearance of new chemical pharmaceutical products. The objective of this study was to analyze the behavior of silver nanoparticles stabilized with collagen (AgNPcol) and to check the skin permeation capacity and action in paw edema induced by carrageenan. AgNPcol synthesis was carried out using solutions of reducing agent sodium borohydride (NaBH₄), silver nitrate (AgNO₃) and collagen. Characterization was done by using dynamic light scattering (DLS) and X-ray diffraction (XRD) and AFM. Cellular viability testing was performed by using flow cytometry in human melanoma cancer (MV3) and murine fibroblast (L929) cells. The skin permeation study was conducted using a Franz diffusion cell, and the efficiency of AgNPcol against the formation of paw edema in mice was evaluated. The hydrodynamic diameter and zeta potential of AgNPcol were 140.7±7.8nm and 20.1±0.7mV, respectively. AgNPcol failed to induce early apoptosis, late apoptosis, and necrosis in L929 cells; however, it exhibited enhanced toxicity in cancer cells (MV3) compared to normal cells (L929). AgNPcol demonstrated increased toxicological effects in cancer MV3 cells, promoting skin permeation, and preventing paw edema.

Biomimetic whitlockite inorganic nanoparticles-mediated in situ remodeling and rapid bone regeneration

Bone remodeling process relies on complex signaling pathway between osteoblasts and osteoclasts and control mechanisms to achieve homeostasis of their growth and differentiation. Despite previous achievements in understanding complicated signaling pathways between cells and bone extracellular matrices during bone remodeling process, a role of local ionic concentration remains to be elucidated. Here, we demonstrate that synthetic whitlockite (WH: Ca₁₈Mg₂(HPO₄)₂(PO₄)₁₂) nanoparticles can recapitulate early-stage of bone regeneration through stimulating osteogenic differentiation, prohibiting osteoclastic activity, and transforming into mechanically enhanced hydroxyapatite (HAP)-neo bone tissues by continuous supply of PO₄^3- and Mg²⁺ under physiological conditions. In addition, based on their structural analysis, the dynamic phase transformation from WH into HAP contributed as a key factor for rapid bone regeneration with denser hierarchical neo-bone structure. Our findings suggest a groundbreaking concept of 'living bone minerals' that actively communicate with the surrounding system to induce self-healing, while previous notions about bone minerals have been limited to passive products of cellular mineralization.

In Vitro Biocompatibility of Si Alloyed Multi-Principal Element Carbide Coatings

In the current study, we have examined the possibility to improve the biocompatibility of the (TiZrNbTaHf)C through replacement of either Ti or Ta by Si. The coatings were deposited on Si and 316L stainless steel substrates by magnetron sputtering in an Ar+CH₄ mixed atmosphere and were examined for elemental composition, chemical bonds, surface topography, surface electrical charge and biocompatible characteristics. The net surface charge was evaluated at nano and macroscopic scale by measuring the electrical potential and work function, respectively. The biocompatible tests comprised determination of cell viability and cell attachment to the coated surface. The deposited coatings had C/(metal+Si) ratios close to unity, while a mixture of metallic carbide, free-carbon and oxidized species formed on the film surface. The coatings’ surfaces were smooth and no influence of surface roughness on electrical charge or biocompatibility was found. The biocompatible characteristics correlated well with the electrical potential/work function, suggesting a significant role of surface charge in improving biocompatibility, particularly cell attachment to coating's surface. Replacement of either Ti or Ta by Si in the (TiZrNbTaHf)C coating led to an enhanced surface electrical charge, as well as to superior biocompatible properties, with best results for the (TiZrNbSiHf)C coating.