Facile One-step Micropatterning Using Photodegradable Methacrylated Gelatin Hydrogels for Improved Cardiomyocyte Organization and Alignment

GelMA micropattern enhances cardiomyocyte organization, maturation, and contraction via contact guidance

Cardiac tissue engineering has emerged as a promising approach for restoring the functionality of damaged cardiac tissues following myocardial infarction. To effectively replicate the native anisotropic structure of cardiac tissues in vitro, this study focused on the fabrication of micropatterned gelatin methacryloyl hydrogels with varying geometric parameters. These substrates were evaluated for their ability to guide induced pluripotent stem cell-derived cardiomyocytes (CMs). The findings demonstrate that the mechanical properties of this hydrogel closely resemble those of native cardiac tissues, and it exhibits high fidelity in micropattern fabrication. Micropatterned hydrogel substrates lead to enhanced organization, maturation, and contraction of CMs. A microgroove with 20-μm-width and 20-μm-spacing was identified as the optimal configuration for maximizing the contact guidance effect, supported by analyses of nuclear orientation and F-actin organization. Furthermore, this specific micropattern design was found to promote CMs' maturation, as evidenced by increased expression of connexin 43 and vinculin, along with extended sarcomere length. It also enhanced CMs' contraction, resulting in larger contractile amplitudes and greater contractile motion anisotropy. In conclusion, these results underscore the significant benefits of optimizing micropatterned gelatin methacryloyl for improving CMs' organization, maturation, and contraction. This valuable insight paves the way for the development of highly organized and functionally mature cardiac tissues in vitro.

Advanced Multifunctional Hydrogels for Enhanced Wound Healing through Ultra-Fast Selenol-SNAr Chemistry

Fabrication of versatile hydrogels in a facile and effective manner represents a pivotal challenge in the field of biomaterials. Herein, a novel strategy is presented for preparing on-demand degradable hydrogels with multilevel responsiveness. By employing selenol-dichlorotetrazine nucleophilic aromatic substitution (SNAr) to synthesize hydrogels under mild conditions in a buffer solution, the necessity of additives or posttreatments can be obviated. The nucleophilic and redox reactions between selenol and tetrazine culminate in the formation of three degradable chemical bonds-diselenide, aryl selenide, and dearomatized selenide-in a single, expeditious step. The resultant hydrogel manifests exceptional adaptability to intricate environments in conjunction with self-healing and on-demand degradation properties. Furthermore, the resulting material demonstrated light-triggered antibacterial activity. Animal studies further underscore the potential of integrating metformin into Se-Tz hydrogels under green light irradiation, as it effectively stimulates angiogenesis and collagen deposition, thereby fostering efficient wound healing. In comparison to previously documented hydrogels, Se-Tz hydrogels exhibit controlled degradation and drug release, outstanding antibacterial activity, mechanical robustness, and bioactivity, all without the need for costly and intricate preparation procedures. These findings underscore Se-Tz hydrogels as a safe and effective therapeutic option for diabetic wound dressings.

Enhancing the mechanical strength of 3D printed GelMA for soft tissue engineering applications

Gelatin methacrylate (GelMA) hydrogels have gained significant traction in diverse tissue engineering applications through the utilization of 3D printing technology. As an artificial hydrogel possessing remarkable processability, GelMA has emerged as a pioneering material in the advancement of tissue engineering due to its exceptional biocompatibility and degradability. The integration of 3D printing technology facilitates the precise arrangement of cells and hydrogel materials, thereby enabling the creation of in vitro models that simulate artificial tissues suitable for transplantation. Consequently, the potential applications of GelMA in tissue engineering are further expanded. In tissue engineering applications, the mechanical properties of GelMA are often modified to overcome the hydrogel material's inherent mechanical strength limitations. This review provides a comprehensive overview of recent advancements in enhancing the mechanical properties of GelMA at the monomer, micron, and nano scales. Additionally, the diverse applications of GelMA in soft tissue engineering via 3D printing are emphasized. Furthermore, the potential opportunities and obstacles that GelMA may encounter in the field of tissue engineering are discussed. It is our contention that through ongoing technological progress, GelMA hydrogels with enhanced mechanical strength can be successfully fabricated, leading to the production of superior biological scaffolds with increased efficacy for tissue engineering purposes.

Research Progress on Cardiac Tissue Construction of Mesenchymal Stem Cells for Myocardial Infarction

Heart failure is still the main complication affecting the prognosis of acute myocardial infarction (AMI), and mesenchymal stem cells (MSCs) are an effective treatment to replace necrotic myocardium and improve cardiac functioning. However, the transplant survival rate of MSCs still presents challenges. In this review, the biological characteristics of MSCs, the progress of mechanism research in the treatment of myocardial infarction, and the advances in improving the transplant survival rate of MSCs in the replacement of necrotic myocardial infarction are systematically described. From a basic to advanced clinical research, MSC transplants have evolved from a pure injection, an exosome injection, the genetic modification of MSCs prior to injection to the cardiac tissue engineering of MSC patch grafting. This study shows that MSCs have wide clinical applications in the treatment of AMI, suggesting improved myocardial tissue creation. A broader clinical application prospect will be explored and developed to improve the survival rate of MSC transplants and myocardial vascularization.

Stimuli-Responsive Hydrogels: The Dynamic Smart Biomaterials of Tomorrow

In the past decade, stimuli-responsive hydrogels are increasingly studied as biomaterials for tissue engineering and regenerative medicine purposes. Smart hydrogels can not only replicate the physicochemical properties of the extracellular matrix but also mimic dynamic processes that are crucial for the regulation of cell behavior. Dynamic changes can be influenced by the hydrogel itself (isotropic vs anisotropic) or guided by applying localized triggers. The resulting swelling-shrinking, shape-morphing, as well as patterns have been shown to influence cell function in a spatiotemporally controlled manner. Furthermore, the use of stimuli-responsive hydrogels as bioinks in 4D bioprinting is very promising as they allow the biofabrication of complex microstructures. This perspective discusses recent cutting-edge advances as well as current challenges in the field of smart biomaterials for tissue engineering. Additionally, emerging trends and potential future directions are addressed.

Micropatterned fibrin scaffolds increase cardiomyocyte alignment and contractility for the fabrication of engineered myocardial tissue

Cardiovascular disease is the leading cause of death in the United States, which can result in blockage of a coronary artery, triggering a myocardial infarction (MI), scar tissue formation in the myocardium, and ultimately heart failure. Currently, the gold-standard solution for total heart failure is a heart transplantation. An alternative to total-organ transplantation is surgically remodeling the ventricle with the implantation of a cardiac patch. Acellular cardiac patches have previously been investigated using synthetic or decellularized native materials to improve cardiac function. However, a limitation of this strategy is that acellular cardiac patches only reshape the ventricle and do not increase cardiac contractile function. Toward the development of a cardiac patch, our laboratory previously developed a cell-populated composite fibrin scaffold and aligned microthreads to recapitulate the mechanical properties of native myocardium. In this study, we explore micropatterning the surfaces of fibrin gels to mimic anisotropic native tissue architecture and promote cellular alignment of human induced pluripotent stem cell cardiomyocytes (hiPS-CM), which is crucial for increasing scaffold contractile properties. hiPS-CMs seeded on micropatterned surfaces exhibit cellular elongation, distinct sarcomere alignment, and circumferential connexin-43 staining at 14 days of culture, which are necessary for mature contractile properties. Constructs were also subject to electrical stimulation during culture to promote increased contractile properties. After 7 days of stimulation, contractile strains of micropatterned constructs were significantly higher than unpatterned controls. These results suggest that the use of micropatterned topographic cues on fibrin scaffolds may be a promising strategy for creating engineered cardiac tissue.

Influence of Gelatin Source and Bloom Number on Gelatin Methacryloyl Hydrogels Mechanical and Biological Properties for Muscle Regeneration

Approximately half of an adult human's body weight is made up of muscles. Thus, restoring the functionality and aesthetics of lost muscle tissue is critical. The body is usually able to repair minor muscle injuries. However, when volumetric muscle loss occurs due to tumour extraction, for instance, the body will form fibrous tissue instead. Gelatin methacryloyl (GelMA) hydrogels have been applied for drug delivery, tissue adhesive, and various tissue engineering applications due to their tuneable mechanical properties. Here, we have synthesised GelMA from different gelatin sources (i.e., porcine, bovine, and fish) with varying bloom numbers, which refers to the gel strength, and investigated for the influence of the source of gelatin and the bloom number on biological activities and mechanical properties. The results indicated that the source of the gelatin and variable bloom numbers have an impact on GelMA hydrogel properties. Furthermore, our findings established that the bovine-derived gelatin methacryloyl (B-GelMA) has better mechanical properties than the other varieties composed of porcine and fish with 60 kPa, 40 kPa, and 10 kPa in bovine, porcine, and fish, respectively. Additionally, it showed a noticeably greater swelling ratio (SR) ~1100% and a reduced rate of degradation, improving the stability of hydrogels and giving cells adequate time to divide and proliferate to compensate for muscle loss. Furthermore, the bloom number of gelatin was also proven to influence the mechanical properties of GelMA. Interestingly, although GelMA made of fish had the lowest mechanical strength and gel stability, it demonstrated excellent biological properties. Overall, the results emphasise the importance of gelatin source and bloom number, allowing GelMA hydrogels to have a wide range of mechanical and excellent biological properties and making them suitable for various muscle tissue regeneration applications.

Poly(ethylene oxide)/Gelatin-Based Biphasic Photocrosslinkable Hydrogels of Tunable Morphology for Hepatic Progenitor Cell Encapsulation

Macroporous hydrogels have great potential for biomedical applications. Liquid or gel-like pores were created in a photopolymerizable hydrogel by forming water-in-water emulsions upon mixing aqueous solutions of gelatin and a poly(ethylene oxide) (PEO)-based triblock copolymer. The copolymer constituted the continuous matrix, which dominated the mechanical properties of the hydrogel once photopolymerized. The gelatin constituted the dispersed phase, which created macropores in the hydrogel. The microstructures of the porous hydrogel were determined by the volume fraction of the gelatin phase. When volume fractions were close to 50 v%, free-standing hydrogels with interpenetrated morphology can be obtained thanks to the addition of a small amount of xanthan. The hydrogels displayed Young's moduli ranging from 5 to 30 kPa. They have been found to be non-swellable and non-degradable in physiological conditions. Preliminary viability tests with hepatic progenitor cells embedded in monophasic PEO-based hydrogels showed rapid mortality of the cells, whereas encouraging viability was observed in PEO-based triblock copolymer/gelatin macroporous hydrogels. The latter has the potential to be used in cell therapy.

Self-Illuminating Triggered Release of Therapeutics from Photocleavable Nanoprodrug for the Targeted Treatment of Breast Cancer

Photocleavable biomaterials and bioconjugates have been widely researched for tissue engineering, cell culture, and therapeutics delivery. However, most in vivo applications of these materials or conjugates require external irradiation, and some of the light sources used such as ultraviolet (UV) light have poor tissue penetration. To address these key limitations, we synthesized a photocleavable nanoprodrug using luminol (a luminescent donor), chlorambucil (CHL, i.e., an antitumor drug with a photocleavable linker), and polyethylene glycol-folic acid conjugates (a targeted moiety) loaded onto polyamidoamine (PAMAM). The synthesized nanoprodrug can smartly release its payloads through photocleavage of photoresponsive linker by UV light, which was produced in situ by reacting luminol with pathological reactive oxygen species (ROS). The luminescence performance and absorption spectrum of this nanoprodrug was characterized in detail. In vitro cellular assays verified that the nanoprodrugs could be efficiently internalized by 4T1 and MDA-MB-231 cells, and the CHL released from the nanoprodrugs could distinctly decrease cell viability through the damage of DNA in cells. In vivo animal experiments demonstrated that the nanoprodrugs were mainly accumulated at tumor sites, and the antitumor drug CHL could be smartly released from the nanoprodrugs through cleavage of photosensitive linkers at a high level of ROS. The released CHL significantly inhibited the growth of tumors without any obvious adverse effects. Our results provide a practicable strategy to expand the in vivo application of photocleavable biomaterials and bioconjugates.

The Bumpy Road to Stem Cell Therapies: Rational Design of Surface Topographies to Dictate Stem Cell Mechanotransduction and Fate

Cells sense and respond to a variety of physical cues from their surrounding microenvironment, and these are interpreted through mechanotransductive processes to inform their behavior. These mechanisms have particular relevance to stem cells, where control of stem cell proliferation, potency, and differentiation is key to their successful application in regenerative medicine. It is increasingly recognized that surface micro- and nanotopographies influence stem cell behavior and may represent a powerful tool with which to direct the morphology and fate of stem cells. Current progress toward this goal has been driven by combined advances in fabrication technologies and cell biology. Here, the capacity to generate precisely defined micro- and nanoscale topographies has facilitated the studies that provide knowledge of the mechanotransducive processes that govern the cellular response as well as knowledge of the specific features that can drive cells toward a defined differentiation outcome. However, the path forward is not fully defined, and the "bumpy road" that lays ahead must be crossed before the full potential of these approaches can be fully exploited. This review focuses on the challenges and opportunities in applying micro- and nanotopographies to dictate stem cell fate for regenerative medicine. Here, key techniques used to produce topographic features are reviewed, such as photolithography, block copolymer lithography, electron beam lithography, nanoimprint lithography, soft lithography, scanning probe lithography, colloidal lithography, electrospinning, and surface roughening, alongside their advantages and disadvantages. The biological impacts of surface topographies are then discussed, including the current understanding of the mechanotransductive mechanisms by which these cues are interpreted by the cells, as well as the specific effects of surface topographies on cell differentiation and fate. Finally, considerations in translating these technologies and their future prospects are evaluated.

Stimuli-responsive destructible polymeric hydrogels based on irreversible covalent bond dissociation

Covalently crosslinked stimuli-destructible hydrogels with the ability of irreversible bond dissociation have attracted great attentions due to their biodegradability, stability against hydrolysis, and controlled solubility upon insertion of desired triggers.

Cell-laden injectable microgels: Current status and future prospects for cartilage regeneration

Injectable hydrogels have been employed extensively as versatile materials for cartilage regeneration due to their excellent biocompatibility, tunable structure, and ability to accommodate bioactive factors, as well as their ability to be locally delivered via minimally invasive injection to fill irregular defects. More recently, in vitro and in vivo studies have revealed that processing these materials to produce cell-laden microgels can enhance cell-cell and cell-matrix interactions and boost nutrient and metabolite exchange. Moreover, these studies have demonstrated gene expression profiles and matrix regeneration that are superior compared to conventional injectable bulk hydrogels. As cell-laden microgels and their application in cartilage repair are moving closer to clinical translation, this review aims to present an overview of the recent developments in this field. Here we focus on the currently used biomaterials and crosslinking strategies, the innovative fabrication techniques being used for the production of microgels, the cell sources used, the signals used for induction of chondrogenic differentiation and the resultant biological responses, and the ability to create three-dimensional, functional cartilage tissues. In addition, this review also covers the current clinical approaches for repairing cartilage as well as specific challenges faced when attempting the regeneration of damaged cartilage tissue. New findings related to the macroporous nature of the structures formed by the assembled microgel building blocks and the novel use of microgels in 3D printing for cartilage tissue engineering are also highlighted. Finally, we outline the challenges and future opportunities for employing cell-laden microgels in clinical applications.

Magnetic Resonance Imaging-Guided Multi-Stimulus-Responsive Drug Delivery Strategy for Personalized and Precise Cancer Treatment

The emergence of nano-targeted controlled release liposomal drug carriers has provided a breakthrough in cancer therapy. However, their clinical efficacy is unsatisfactory, which is related to individualized differences in targeted drugs and poor in vivo release efficiency. In this paper, we prepared a class of personalized targeted and precisely controlled-release therapeutic drug carriers (GF liposomes) by co-assembling targeting and traceable o-nitrobenzyl ester lipids to propose a magnetic resonance imaging (MRI)-guided personalized in vivo targeted drug screening strategy and a multi-stimulus superimposed controlled-release strategy. Furthermore, by following the drug release process of drug-loaded liposomes (GF-D), it was found that these liposomes could rely on energy superposition to achieve more sensitive and efficient controlled drug release. In addition, the indispensable adjustment of liposome formulation for personalized MRI-based targeted therapy was verified by differential cellular uptake and in vivo magnetic resonance imaging. In the end, the 10.22-fold tumor suppression effect in the stimulus superposition group (GF-D-UV) indicates that the multi-stimulus cumulative response strategy and MRI-guided in vivo screening strategy can more effectively treat cancer. This contribution provides a concise and clever design idea for the future development of personalized precise and efficient clinical cancer therapies.

Self-Organogenesis from 2D Micropatterns to 3D Biomimetic Biliary Trees

BACKGROUND AND AIMS

Globally, liver diseases account for 2 million deaths per year. For those with advanced liver disease the only curative approach is liver transplantation. However, less than 10% of those in need get a liver transplant due to limited organ availability. To circumvent this challenge, there has been a great focus in generating a bioengineered liver. Despite its essential role in liver functions, a functional biliary system has not yet been developed. In this framework, exploration of epithelial cell self-organogenesis and microengineering-driven geometrical cell confinement allow to envision the bioengineering of a functional biomimetic intrahepatic biliary tract.

APPROACH

three-dimensional (3D) bile ducts were built in vitro by restricting cell adhesion to two-dimensional (2D) patterns to guide cell self-organization. Tree shapes mimicking the configuration of the human biliary system were micropatterned on glass slides, restricting cell attachment to these areas. Different tree geometries and culture conditions were explored to stimulate self-organogenesis of normal rat cholangiocytes (NRCs) used as a biliary cell model, either alone or in co-culture with human umbilical endothelial cells (HUVECs).

RESULTS

Pre-seeding the micropatterns with HUVECs promoted luminogenesis with higher efficiency to yield functional branched biliary tubes. Lumen formation, apico-basal polarity, and preservation of the cholangiocyte phenotype were confirmed. Moreover, intact and functional biliary structures were detached from the micropatterns for further manipulation.

CONCLUSION

This study presents physiologically relevant 3D biliary duct networks built in vitro from 2D micropatterns. This opens opportunities for investigating bile duct organogenesis, physiopathology, and drug testing.

Quantitative developmental biology in vitro using micropatterning

Micropatterning encompasses a set of methods aimed at precisely controlling the spatial distribution of molecules onto the surface of materials. Biologists have borrowed the idea and adapted these methods, originally developed for electronics, to impose physical constraints on biological systems with the aim of addressing fundamental questions across biological scales from molecules to multicellular systems. Here, I approach this topic from a developmental biologist's perspective focusing specifically on how and why micropatterning has gained in popularity within the developmental biology community in recent years. Overall, this Primer provides a concise overview of how micropatterns are used to study developmental processes and emphasises how micropatterns are a useful addition to the developmental biologist's toolbox.

Bioactive potential of natural biomaterials: identification, retention and assessment of biological properties

Biomaterials have had an increasingly important role in recent decades, in biomedical device design and the development of tissue engineering solutions for cell delivery, drug delivery, device integration, tissue replacement, and more. There is an increasing trend in tissue engineering to use natural substrates, such as macromolecules native to plants and animals to improve the biocompatibility and biodegradability of delivered materials. At the same time, these materials have favourable mechanical properties and often considered to be biologically inert. More importantly, these macromolecules possess innate functions and properties due to their unique chemical composition and structure, which increase their bioactivity and therapeutic potential in a wide range of applications. While much focus has been on integrating these materials into these devices via a spectrum of cross-linking mechanisms, little attention is drawn to residual bioactivity that is often hampered during isolation, purification, and production processes. Herein, we discuss methods of initial material characterisation to determine innate bioactivity, means of material processing including cross-linking, decellularisation, and purification techniques and finally, a biological assessment of retained bioactivity of a final product. This review aims to address considerations for biomaterials design from natural polymers, through the optimisation and preservation of bioactive components that maximise the inherent bioactive potency of the substrate to promote tissue regeneration.

Microencapsulation improves chondrogenesis in vitro and cartilaginous matrix stability in vivo compared to bulk encapsulation

The encapsulation of cells into microgels is attractive for applications in tissue regeneration. While cells are protected against shear stress during injection, the assembly of microgels after injection into a tissue defect also forms a macroporous scaffold that allows effective nutrient transport throughout the construct. However, in most of current strategies that form microgel-based macroporous scaffold or higher-order structures, cells are seeded during or post the assembly process and not microencapsulated in situ. The objective of this study is to investigate the chondrogenic phenotype of microencapsulated fetal chondrocytes in a biocompatible, assembled microgel system vs. bulk gels and to test the stability of the constructs in vivo. Here, we demonstrate that cell microencapsulation leads to increased expression of cartilage-specific genes in a TGF-β1-dependent manner. This correlates, as shown by histological staining, with the ability of microencapsulated cells to deposit cartilaginous matrix after migrating to the surface of the microgels, while keeping a macroscopic granular morphology. Implantation of precultured scaffolds in a subcutaneous mouse model results in vessel infiltration in bulk gels but not in assembled microgels, suggesting a higher stability of the matrix produced by the cells in the assembled microgel constructs. The cells are able to remodel the microgels as demonstrated by the gradual disappearance of the granular structure in vivo. The biocompatible microencapsulation and microgel assembly system presented in this article therefore hold great promise as an injectable system for cartilage repair.

The Role of the Microenvironment in Controlling the Fate of Bioprinted Stem Cells

The field of tissue engineering and regenerative medicine has made numerous advances in recent years in the arena of fabricating multifunctional, three-dimensional (3D) tissue constructs. This can be attributed to novel approaches in the bioprinting of stem cells. There are expansive options in bioprinting technology that have become more refined and specialized over the years, and stem cells address many limitations in cell source, expansion, and development of bioengineered tissue constructs. While bioprinted stem cells present an opportunity to replicate physiological microenvironments with precision, the future of this practice relies heavily on the optimization of the cellular microenvironment. To fabricate tissue constructs that are useful in replicating physiological conditions in laboratory settings, or in preparation for transplantation to a living host, the microenvironment must mimic conditions that allow bioprinted stem cells to proliferate, differentiate, and migrate. The advances of bioprinting stem cells and directing cell fate have the potential to provide feasible and translatable approach to creating complex tissues and organs. This review will examine the methods through which bioprinted stem cells are differentiated into desired cell lineages through biochemical, biological, and biomechanical techniques.

Combined Effects of Electric Stimulation and Microgrooves in Cardiac Tissue-on-a-Chip for Drug Screening

Animal models and traditional cell cultures are essential tools for drug development. However, these platforms can show striking discrepancies in efficacy and side effects when compared to human trials. These differences can lengthen the drug development process and even lead to drug withdrawal from the market. The establishment of preclinical drug screening platforms that have higher relevancy to physiological conditions is desirable to facilitate drug development. Here, a heart-on-a-chip platform, incorporating microgrooves and electrical pulse stimulations to recapitulate the well-aligned structure and synchronous beating of cardiomyocytes (CMs) for drug screening, is reported. Each chip is made with facile lithographic and laser-cutting processes that can be easily scaled up to high-throughput format. The maturation and phenotypic changes of CMs cultured on the heart-on-a-chip is validated and it can be treated with various drugs to evaluate cardiotoxicity and cardioprotective efficacy. The heart-on-a-chip can provide a high-throughput drug screening platform in preclinical drug development.

Approaches for the synthesis of o-nitrobenzyl and coumarin linkers for use in photocleavable biomaterials and bioconjugates and their biomedical applications

Photocleavable biomaterials and bioconjugates are particularly interesting because light sources are easy to obtain and the responsiveness of materials is convenient to control. In recent years, various photocleavable biomaterials and bioconjugates have been synthesized for the control of payload release, regulation of biomolecule activity, 3D cell culture, and investigation of molecular mechanisms. Photocleavable linkers are crucial components of photocleavable biomaterials, which significantly influence the photoresponsive capabilities of materials. Photosensitive molecules, such as o-nitrobenzyls and coumarins, have been extensively developed as photocleavable linkers. In the present review, we provide comprehensive knowledge regarding the synthetic strategies of o-nitrobenzyl and coumarin derived linkers with various functional groups and their applications for the construction of photocleavable biomaterials and bioconjugates. Finally, the biomedical applications of o-nitrobenzyl and coumarin-based photocleavable biomaterials and bioconjugates will be summarized and discussed.

Recent advances in bio-orthogonal and dynamic crosslinking of biomimetic hydrogels

In recent years, dynamic, 'click' hydrogels have been applied in numerous biomedical applications. Owing to the mild, cytocompatible, and highly specific reaction kinetics, a multitude of orthogonal handles have been developed for fabricating dynamic hydrogels to facilitate '4D' cell culture. The high degree of tunability in crosslinking reactions of orthogonal 'click' chemistry has enabled a bottom-up approach to install specific biomimicry in an artificial extracellular matrix. In addition to click chemistry, highly specific enzymatic reactions are also increasingly used for network crosslinking and for spatiotemporal control of hydrogel properties. On the other hand, covalent adaptable chemistry has been used to recapitulate the viscoelastic component of biological tissues and for formulating self-healing and shear-thinning hydrogels. The common feature of these three classes of chemistry (i.e., orthogonal click chemistry, enzymatic reactions, and covalent adaptable chemistry) is that they can be carried out under ambient and aqueous conditions, a prerequisite for maintaining cell viability for in situ cell encapsulation and post-gelation modification of network properties. Due to their orthogonality, different chemistries can also be applied sequentially to provide additional biochemical and mechanical control to guide cell behavior. Herein, we review recent advances in the use of orthogonal click chemistry, enzymatic reactions, and covalent adaptable chemistry for the development of dynamically tunable and biomimetic hydrogels.

Spatiotemporally Controlled Photoresponsive Hydrogels: Design and Predictive Modeling from Processing through Application

Photoresponsive hydrogels (PRHs) are soft materials whose mechanical and chemical properties can be tuned spatially and temporally with relative ease. Both photo-crosslinkable and photodegradable hydrogels find utility in a range of biomedical applications that require tissue-like properties or programmable responses. Progress in engineering with PRHs is facilitated by the development of theoretical tools that enable optimization of their photochemistry, polymer matrices, nanofillers, and architecture. This review brings together models and design principles that enable key applications of PRHs in tissue engineering, drug delivery, and soft robotics, and highlights ongoing challenges in both modeling and application.

The Effect of Thiol Structure on Allyl Sulfide Photodegradable Hydrogels and their Application as a Degradable Scaffold for Organoid Passaging

Intestinal organoids are useful in vitro models for basic and translational studies aimed at understanding and treating disease. However, their routine culture relies on animal-derived matrices that limit translation to clinical applications. In fact, there are few fully defined, synthetic hydrogel systems that allow for the expansion of intestinal organoids. Here, an allyl sulfide photodegradable hydrogel is presented, achieving rapid degradation through radical addition-fragmentation chain transfer (AFCT) reactions, to support routine passaging of intestinal organoids. Shear rheology to first characterize the effect of thiol and allyl sulfide crosslink structures on degradation kinetics is used. Irradiation with 365 nm light (5 mW cm-2 ) in the presence of a soluble thiol (glutathione at 15 × 10-3 m), and a photoinitiator (lithium phenyl-2,4,6-trimethylbenzoylphosphinate at 1 × 10-3 m), leads to complete hydrogel degradation in less than 15 s. Allyl sulfide hydrogels are used to support the formation of epithelial colonies from single intestinal stem cells, and rapid photodegradation is used to achieve repetitive passaging of stem cell colonies without loss in morphology or organoid formation potential. This platform could support long-term culture of intestinal organoids, potentially replacing the need for animal-derived matrices, while also allowing systematic variations to the hydrogel properties tailored for the organoid of interest.

Tools for probing host-bacteria interactions in the gut microenvironment: From molecular to cellular levels

Healthy function of the gut microenvironment is dependent on complex interactions between the bacteria of the microbiome, epithelial and immune (host) cells, and the surrounding tissue. Misregulation of these interactions is implicated in disease. A range of tools have been developed to study these interactions, from mechanistic studies to therapeutic evaluation. In this Digest, we highlight select tools at the cellular and molecular level for probing specific cell-microenvironment interactions. Approaches are overviewed for controlling and probing cell-cell interactions, from transwell and microfluidic devices to engineered bacterial peptidoglycan fragments, and cell-matrix interactions, from three-dimensional scaffolds to chemical handles for in situ modifications.

Mechanochemical Patternable ECM-Mimetic Hydrogels for Programmed Cell Orientation

Native human tissues are supported by a viscoelastic extracellular matrix (ECM) that can adapt its intricate network to dynamic mechanical stimuli. To recapitulate the unique ECM biofunctionality, hydrogel design is shifting from typical covalent crosslinks toward covalently adaptable networks. To pursue such properties, herein hybrid polysaccharide-polypeptide networks are designed based on dynamic covalent assembly inspired by natural ECM crosslinking processes. This is achieved through the synthesis of an amine-reactive oxidized-laminarin biopolymer that can readily crosslink with gelatin (oxLAM-Gelatin) and simultaneously allow cell encapsulation. Interestingly, the rational design of oxLAM-Gelatin hydrogels with varying aldehyde-to-amine ratios enables a refined control over crosslinking kinetics, viscoelastic properties, and degradability profile. The mechanochemical features of these hydrogels post-crosslinking offer an alternative route for imprinting any intended nano- or microtopography in ECM-mimetic matrices bearing inherent cell-adhesive motifs. Different patterns are easily paved in oxLAM-Gelatin under physiological conditions and complex topographical configurations are retained along time. Human adipose-derived mesenchymal stem cells contacting mechanically sculpted oxLAM-Gelatin hydrogels sense the underlying surface nanotopography and align parallel to the anisotropic nanoridge/nanogroove intercalating array. These findings demonstrate that covalently adaptable features in ECM-mimetic networks can be leveraged to combine surface topography and cell-adhesive motifs as they appear in natural matrices.

Micropatterned hydrogels and cell alignment enhance the odontogenic potential of stem cells from apical papilla in-vitro

INTRODUCTION

An understanding of the extracellular matrix characteristics which stimulate and guide stem cell differentiation in the dental pulp is fundamental for the development of enhanced dental regenerative therapies. Our objectives, in this study, were to determine whether stem cells from the apical papilla (SCAP) responded to substrate stiffness, whether hydrogels providing micropatterned topographical cues stimulate SCAP self-alignment, and whether the resulting alignment could influence their differentiation towards an odontogenic lineage in-vitro.

METHODS

Experiments utilized gelatin methacryloyl (GelMA) hydrogels of increasing concentrations (5, 10 and 15%). We determined their compressive modulus via unconfined compression and analyzed cell spreading via F-actin/DAPI immunostaining. GelMA hydrogels were micropatterned using photolithography, in order to generate microgrooves and ridges of 60 and 120μm, onto which SCAP were seeded and analyzed for self-alignment via fluorescence microscopy. Lastly, we analyzed the odontogenic differentiation of SCAP using alkaline phosphatase protein expression (ANOVA/Tukey α=0.05).

RESULTS

SCAP appeared to proliferate better on stiffer hydrogels. Both 60 and 120μm micropatterned hydrogels guided the self-alignment of SCAP with no significant difference between them. Similarly, both 60 and 120μm micropattern aligned cells promoted higher odontogenic differentiation than non-patterned controls.

SIGNIFICANCE

In summary, both substrate mechanics and geometry have a statistically significant influence on SCAP response, and may assist in the odontogenic differentiation of dental stem cells. These results may point toward the fabrication of cell-guiding scaffolds for regenerative endodontics, and may provide cues regarding the development of the pulp-dentin interface during tooth formation.

Multidimensional assembly using layer-by-layer deposition for synchronized cardiac macro tissues

The fabrication of biomimetic structures for tissues and organs is emerging in the fields of biomedical engineering and precision medicine. While current progress in biomedical research provides a number of biofabrication methods, the construction of multi-dimensional cardiac tissue is highly challenging due to difficulties in the maturation and synchronization of cardiomyocytes (CMs) in conjunction with other types of cells, such as myofibroblasts and endothelial cells. Here, we show a simple fabrication methodology to construct multi-dimensional cardiac macro tissue (mCMT) by layer-by-layer (LBL) deposition of cells on micro patterned PDMS. mCMTs formed by LBL deposition of pluripotent stem cell (PSC)-derived cardiomyocytes and cardiac fibroblasts formed 3D patterned structures with synchronized beating characteristics. We also demonstrate that cardiac maturation factors such as the gene expression of MLC2v and cTNI and formation of sarcomeres in mCMTs were significantly enhanced by LBL deposition and growth factors during the maturation process. Fabrication of matured mCMTs with synchronized beating enables providing an efficient platform for evaluating the efficacy and toxicity of drug candidates. These results have important implications because mCMTs are applicable to diverse in vitro studies and drug screening methods that require tissue-like structures and functions in a physiological environment.

We fabricated a cardiac macro tissue with synchronized beating by layer-by-layer deposition and evaluated the effect of drug candidates.

A Facile Method to Fabricate Anisotropic Extracellular Matrix with 3D Printing Topological Microfibers

Natural tissues and organs have different requirements regarding the mechanical characteristics of response. It is still a challenge to achieve biomaterials with anisotropic mechanical properties using an extracellular matrix with biological activity. We have improved the ductility and modulus of the gelatin matrix using 3D printed gelatin microfibers with different concentrations and topologies and, at the same, time achieved anisotropic mechanical properties. We successfully printed flat microfibers using partially cross-linked gelatin. We modified the 10% (w/v) gelatin matrix with microfibers consisting of a gelatin concentration of 14% (w/v), increasing the modulus to about three times and the elongation at break by 39% in parallel with the fiber direction. At the same time, it is found that the microfiber topology can effectively change the matrix ductility, and changing the modulus of the gelatin used in the microfiber can effectively change the matrix modulus. These findings provide a simple method for obtaining active biological materials that are closer to a physiological environment.

(Photo-)crosslinkable gelatin derivatives for biofabrication applications

Over the recent decades gelatin has proven to be very suitable as an extracellular matrix mimic for biofabrication and tissue engineering applications. However, gelatin is prone to dissolution at typical cell culture conditions and is therefore often chemically modified to introduce (photo-)crosslinkable functionalities. These modifications allow to tune the material properties of gelatin, making it suitable for a wide range of biofabrication techniques both as a bioink and as a biomaterial ink (component). The present review provides a non-exhaustive overview of the different reported gelatin modification strategies to yield crosslinkable materials that can be used to form hydrogels suitable for biofabrication applications. The different crosslinking chemistries are discussed and classified according to their mechanism including chain-growth and step-growth polymerization. The step-growth polymerization mechanisms are further classified based on the specific chemistry including different (photo-)click chemistries and reversible systems. The benefits and drawbacks of each chemistry are also briefly discussed. Furthermore, focus is placed on different biofabrication strategies using either inkjet, deposition or light-based additive manufacturing techniques, and the applications of the obtained 3D constructs. STATEMENT OF SIGNIFICANCE: Gelatin and more specifically gelatin-methacryloyl has emerged to become one of the gold standard materials as an extracellular matrix mimic in the field of biofabrication. However, also other modification strategies have been elaborated to take advantage of a plethora of crosslinking chemistries. Therefore, a review paper focusing on the different modification strategies and processing of gelatin is presented. Particular attention is paid to the underlying chemistry along with the benefits and drawbacks of each type of crosslinking chemistry. The different strategies were classified based on their basic crosslinking mechanism including chain- or step-growth polymerization. Within the step-growth classification, a further distinction is made between click chemistries as well as other strategies. The influence of these modifications on the physical gelation and processing conditions including mechanical properties is presented. Additionally, substantial attention is put to the applied photoinitiators and the different biofabrication technologies including inkjet, deposition or light-based technologies.

Reversible Hydrogel Photopatterning: Spatial and Temporal Control over Gel Mechanical Properties Using Visible Light Photoredox Catalysis

There is a growing interest in being able to control the mechanical properties of hydrogels for applications in materials, medicine, and biology. Primarily, changes in the hydrogel's physical properties, i.e., stiffness, toughness, etc., are achieved by modulating the network cross-linking chemistry. Common cross-linking strategies rely on (i) irreversible network bond degradation and reformation in response to an external stimulus, (ii) using dynamic covalent chemistry, or (iii) isomerization of integrated functional groups (e.g., azobenzene or spiropyran). Many of these strategies are executed using ultraviolet or visible light since the incident photons serve as an external stimulus that affords spatial and temporal control over the mechanical adaptation process. Here, we describe a different type of hydrogel cross-linking strategy that uses a redox-responsive cross-linker, incorporated in poly(hydroxyethyl acrylate)-based hydrogels at three different weight percent loadings, which consists of two viologen subunits tethered by hexaethylene glycol and capped with styrene groups at each terminus. These dicationic viologen subunits (V²⁺) can be reduced to their monoradical cations (V^•+) through a photoinduced electron transfer (PET) process using a visible light-absorbing photocatalyst (tris(bipyridine)ruthenium(II) dichloride) embedded in the hydrogel, resulting in the intramolecular stacking of viologen radical cations, through radical-radical pairing interactions, while losing two positive charges and the corresponding counteranions from the hydrogel. It is shown how this concerted process ultimately leads to collapse of the hydrogel network and significantly (p < 0.05) increases (by nearly a factor of 2) the soft material's stiffness, tensile strength, and percent elongation at break, all of which is easily reversed via oxidation of the viologen subunits and swelling in water. Application of this reversible PET process was demonstrated by photopatterning the same hydrogel multiple times, where the pattern was "erased" each time by turning off the blue light (∼450 nm) source and allowing for oxidation and reswelling in between patterning steps. The areas of the hydrogel that were masked exhibited lower (by 1-2 kPa) shear storage moduli (G') than the areas that were irradiated for 1.5 h. Moreover, because the viologen subunits in the functional cross-linker are electrochromic, it is possible to visualize the regions of the hydrogel that undergo changes in mechanical properties. This visualization process was illustrated by photopatterning a larger hydrogel (∼9.5 cm on its longest side) with a photomask in the design of an array of stars.

Multifunctional prosthetic polyester-based hybrid mesh for repairing of abdominal wall hernias and defects

This study involves the design, development and evaluation of a new multifunctional prosthetic mesh for treatment of abdominal wall defects without complications. The developed prosthetic mesh is a hybrid platform of both synthetic and natural materials with its backbone consisting of a synthetic commercial polyester fabric (CPF) to provide the required mechanical integrity. The CPF mesh was coated by a natural biodegradable, biocompatible and antimicrobial layer of chitosan (CS) incorporating phenytoin (PH)-loaded pluronic nanomicelles for healing promotion, and ciprofloxacin (CPX)-alginate polyelectrolyte complex-based microparticles as antibacterial agent. The prosthetic mesh was optimized and evaluated in-vitro and in-vivo. The optimum PH-loaded micelles had particle size of 95.42 nm, polydispersity index of 0.41, zeta potential of -18 and entrapment efficiency of 89.4%, while the optimum CPX microcomplexes had particle size of 1292.0 nm, polydispersity index of 0.8, zeta potential of -20.1, complexation efficiency of 81.1%, and minimum inhibitory concentration of 0.25 μg/ml and 0.125 μg/ml against Staphylococcus aureus and Pseudomonas aeruginosa, respectively. In-vivo study on abdominal wall defect dog model was conducted, followed by implantation of the proposed prosthetic meshes. The developed mesh depicted an efficient healing with excellent biocompatibility, and could be an ideal and feasible alternative prosthesis with many advantages such as low cost, inertness, mechanical stability, pliability, low infection rate, limited modification by body tissues, sterilizability, non-carcinogenicity, limited inflammatory reaction, hypoallergenic as well as minimal complications.

Natural hydrogels for cartilage regeneration: Modification, preparation and application

Hydrogels, consisting of hydrophilic polymers, can be used as films, scaffolds, nanoparticles and drug carriers. They are one of the hot research topics in material science and tissue engineering and are widely used in the field of biomedical and biological sciences. Researchers are seeking for a type of material that is similar to human tissues and can partially replace human tissues or organs. The hydrogel has brought possibility to solve this problem. It has good biocompatibility and biodegradability. After entering the body, it does not cause immune and toxic reactions. The degradation time can be controlled, and the degradation products are nontoxic and nonimmunogenic; the final metabolites can be excreted outside the body. Owing to the lack of blood vessels and poor migration ability of chondrocytes, the self-healing ability of damaged cartilage is limited. Tissue engineering has brought a new direction for the regeneration of cartilage. Drug carriers and scaffolds made of hydrogels are widely used in cartilage tissue engineering. The present review introduces the natural hydrogels, which are often used for cartilage tissue engineering with respect to synthesis, modification and application methods.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

This review introduces the natural hydrogels that are often used in cartilage tissue engineering with respect to synthesis, modification and application methods. Furthermore, the essential concepts and recent discoveries were demonstrated to illustrate the achievable goals and the current limitations. In addition, we propose the putative challenges and directions for the use of natural hydrogels in cartilage regeneration.

Spatial Regulation of Valve Interstitial Cell Phenotypes within Three-Dimensional Micropatterned Hydrogels

Calcific aortic valve disease (CAVD) is the third leading cause of cardiovascular disease. CAVD exhibits progressive disruption of the normally highly organized and aligned extracellular matrix (ECM) structure within the valve leaflets simultaneously with myofibroblastic and/or osteogenic differentiation of indigenous endogenous valve interstitial cells (VIC). It is unclear how the alignment of VIC within their 3D microenvironment drives VIC phenotype or how alignment affects cellular responses to biochemical cues in physiological or pathological conditions. In this study, we implement a photolithographic technique to control the alignment and elongation of both normal and diseased human aortic VIC (HAVIC) within microengineered 3D hydrogels consisting of methacrylated hyaluronic acid and methacrylated gelatin. Stripe micropatterning created distinct alignment of HAVIC within a 3D culture system, which promoted spreading and enhanced their activation and osteogenic differentiation in pro-osteogenic conditions. HAVIC from a patient with CAVD exhibited greater susceptibility to myofibroblastic and osteogenic differentiation in culture. The roles of conjugated basic fibroblastic growth factor (bFGF) and RhoA/ROCK pathway in regulating HAVIC phenotypes were also investigated in the presence of aligned microtopography. The addition of bFGF was preventative to osteogenic differentiation for healthy HAVIC; however, it promoted osteogenic differentiation in diseased HAVIC. Inhibition of the ROCK pathway only decreased osteogenic differentiation for diseased HAVIC in the aligned formation. Collectively, these results improve our knowledge of the effects that VIC alignment has on VIC phenotypes and valve disease progression. The cell culture platform also enables a better understanding of the interplay between topography, biochemical cues, and VIC differentiation and provides information useful for directing differentiation as well as valve tissue regeneration.

Use of GelMA for 3D printing of cardiac myocytes and fibroblasts

Aim

To 3D print heart tissue, one must understand how the main two types of cardiac cells are affected by the printing process.

Materials & methods

Effects of gelatin methacryloyl (GelMA) concentration, extruder pressure and duration of UV exposure on survival of cardiac myocytes and fibroblasts were examined using lactate dehydrogenase and LIVE/DEAD assays, bioluminescence imaging and morphological assessment.

Results & conclusion

Cell survival within 3D printed cardiomyocyte-laden GelMA constructs was more sensitive to extruder pressure and GelMA concentrations than within 3D fibroblast-laden GelMA constructs. Cells within both types of constructs were adversely impacted by the UV curing step. Use of mixed cell populations and enrichment of bioink formulation with fibronectin led to an improvement of cardiomyocyte survival and spreading.

Mechanically robust photodegradable gelatin hydrogels for 3D cell culture and in situ mechanical modification

Highly conjugated, hydrophobically modified gelatin hydrogels were synthesized, polymerized and degraded with orthogonal wavelengths of light.

Nanotopography-responsive myotube alignment and orientation as a sensitive phenotypic biomarker for Duchenne Muscular Dystrophy

Duchenne Muscular Dystrophy (DMD) is a fatal genetic disorder currently having no cure. Here we report that culture substrates patterned with nanogrooves and functionalized with Matrigel (or laminin) present an engineered cell microenvironment to allow myotubes derived from non-diseased, less-affected DMD, and severely-affected DMD human induced pluripotent stem cells (hiPSCs) to exhibit prominent differences in alignment and orientation, providing a sensitive phenotypic biomarker to potentially facilitate DMD drug development and early diagnosis. We discovered that myotubes differentiated from myogenic progenitors derived from non-diseased hiPSCs align nearly perpendicular to nanogrooves, a phenomenon not reported previously. We further found that myotubes derived from hiPSCs of a dystrophin-null DMD patient orient randomly, and those from hiPSCs of a patient carrying partially functional dystrophin align approximately 14° off the alignment direction of non-diseased myotubes. Substrates engineered with micron-scale grooves and/or cell adhesion molecules only interacting with integrins all guide parallel myotube alignment to grooves and lose the ability to distinguish different cell types. Disruption of the interaction between the Dystrophin-Associated-Protein-Complex (DAPC) and laminin by heparin or anti-α-dystroglycan antibody IIH6 disenables myotubes to align perpendicular to nanogrooves, suggesting that this phenotype is controlled by the DAPC-mediated cytoskeleton-extracellular matrix linkage.

Near-Infrared-Triggered in Situ Gelation System for Repeatedly Enhanced Photothermal Brachytherapy with a Single Dose

Brachytherapy by the placing of therapeutic radioactive materials into or near tumors has been widely used in a clinical setting for cancer treatment. The efficacy of brachytherapy, however, may often be limited by the radiation resistance for tumor cells located in the hypoxic region of a solid tumor as well as the non-optimal distribution of radioactivity inside the tumor. Herein, a hybrid hydrogel system is developed by using ¹³¹I-labeled copper sulfide (CuS/¹³¹I) nanoparticles as the photothermal- and radiotherapeutic agent, poly(ethylene glycol) double acrylates (PEGDA) as the polymeric matrix, and 2,2'-azobis[2-(2-imidazolin-2-yl) propane] dihydrochloride (AIPH) as the thermal initiator to realize light-induced in situ gelation in the tumor for the combined photothermal brachytherapy. After local injection, CuS/¹³¹I nanoparticles under irradiation by the 915 nm near-infrared (NIR) laser would produce heat to mildly raise the tumor temperature and initiate the polymerization of PEGDA by activating the AIPH thermal initiator, effectively fixing CuS/¹³¹I by in situ gelation within the tumor for the long term. By the repeated NIR irradiation of tumors, the tumor hypoxia could be relieved for a much-longer term, resulting in a significant synergistic photothermal brachytherapeutic effect to eliminate tumors. This work presents an efficient type of NIR-responsive nanoparticle-encapsulated hydrogel system, inspiring the design of a form of brachytherapy.

Cartilage tissue formation through assembly of microgels containing mesenchymal stem cells

Current clinical approaches to treat articular cartilage degeneration provide only a limited ability to regenerate tissue with long-term durability and functionality. In this application, injectable bulk hydrogels and microgels containing stem cells can provide a suitable environment for tissue regeneration. However insufficient cell-cell interactions, low differentiation efficiency and poor tissue adhesion hinder the formation of high-quality hyaline type cartilage. Here, we have designed a higher order tissue-like structure using injectable cell-laden microgels as the building blocks to achieve human bone marrow-derived mesenchymal stem cell (hBMSC) long-term maintenance and chondrogenesis. We have demonstrated that a 4-arm poly(ethylene glycol)-N-hydroxysuccinimide (NHS) crosslinker induces covalent bonding between the microgel building blocks as well as the surrounding tissue mimic. The crosslinking process assembles the microgels into a 3D construct and preserves the viability and cellular functions of the encapsulated hBMSCs. This assembled microgel construct encourages upregulation of chondrogenic markers in both gene and glycosaminoglycan (GAG) expression levels. In addition, the regenerated tissue in the assembled microgels stained positively with Alcian blue and Safranin O exhibiting unique hyaline-like cartilage features. Furthermore, the immunostaining showed a favourable distribution and significantly higher content of type II collagen in the assembled microgels when compared to both the bulk hydrogel and pellet cultures. Collectively, this tissue adhesive hBMSC-laden microgel construct provides potential clinical opportunities for articular cartilage repair and other applications in regenerative medicine.

STATEMENT OF SIGNIFICANCE

A reliable approach to reconstruct durable and fully functional articular cartilage tissue is required for effective clinical therapies. Here, injectable hydrogels together with cell-based therapies offer new treatment strategies in cartilage repair. For effective cartilage regeneration, the injectable hydrogel system needs to be bonded to the surrounding tissue and at the same time needs to be sufficiently stable for prolonged chondrogenesis. In this work, we utilised injectable hBMSC-laden microgels as the building blocks to create an assembled construct via N-hydroxysuccinimide-amine coupling. This crosslinking process also allows for rapid bonding between the assembled microgels and a surrounding tissue mimic. The resultant assembled microgel-construct provides both a physically stable and biologically dynamic environment for hBMSC chondrogenesis, leading to the production of a mature hyaline type cartilage structure.

Applications of Bioengineered 3D Tissue and Tumor Organoids in Drug Development and Precision Medicine: Current and Future

Over the past decade, advances in biomedical and tissue engineering technologies, such as cell culture techniques, biomaterials, and biofabrication, have driven increasingly widespread use of three-dimensional (3D) cell culture platforms and, subsequently, the use of organoids in a variety of research endeavors. Given the 3D nature of these organoid systems, and the frequent inclusion of extracellular matrix components, these constructs typically have more physiologically accurate cell-cell and cell-matrix interactions than traditional 2D cell cultures. As a result, 3D organoids can serve as better model systems than their 2D counterparts. Moreover, as organoids can be biofabricated from highly functional human cells, they have certain advantages over animal models, being human in nature and more easily manipulated in the laboratory. In this review, we describe such organoid technologies and their deployment in drug development and precision medicine efforts. Organoid technologies are rapidly being developed for these applications and now represent a wide variety of tissue types and diseases. Evidence is emerging that organoids are poised for widespread adoption, not only in academia but also in the pharmaceutical industry and in clinical diagnostic applications, positioning them as indispensable tools in medicine.

Increased Cardiomyocyte Alignment and Intracellular Calcium Transients Using Micropatterned and Drug-Releasing Poly(Glycerol Sebacate) Elastomers

Myocardial tissue engineering is a promising therapy for myocardial infarction recovery. The success of myocardial tissue engineering is likely to rely on the combination of cardiomyocytes, prosurvival regulatory signals, and a flexible biomaterial structure that can deliver them. In this study, poly(glycerol sebacate) (PGS), which exhibits stable elasticity under repeated tensile loading, was engineered to provide physical features that aligned cardiomyocytes in a similar manner to that seen in native cardiac tissue. In addition, a small molecule mimetic of brain derived neurotrophic factor (BDNF) was polymerized into the PGS to achieve a continuous and steady release. Micropatterning of PGS elastomers increased cell alignment, calcium transient homogeneity, and cell connectivity. The intensity of the calcium transients in cardiomyocytes was enhanced when cultured on PGS which released a small molecule BDNF mimetic. This study demonstrates that robust micropatterned elastomer films are a potential candidate for the delivery of functional cardiomyocytes and factors to the injured or dysfunctional myocardium, as well as providing novel in vitro platforms to study cardiomyocyte physiology.