Silk Biomaterials with Vascularization Capacity

Using hardystonite as a biomaterial in biomedical and bone tissue engineering applications

Widespread adoption for substitutes of artificial bone grafts based on proper bioceramics has been generated in recent years. Among them, calcium-silicate-based bioceramics, which possess osteoconductive properties and can directly attach to biological organs, have attracted substantial attention for broad ranges of applications in bone tissue engineering. Approaches exist for a novel strategy to promote the drawbacks of bioceramics such as the incorporation of Zn2+, Mg2+, and Zr4+ ions into calcium-silicate networks, and the improvement of their physical, mechanical, and biological properties. Recently, hardystonite (Ca2ZnSi2O7) bioceramics, as one of the most proper calcium-silicate-based bioceramics, has presented excellent biocompatibility, bioactivity, and interaction. Due to its physical, mechanical, and biological behaviors and ability to be shaped utilizing a variety of fabrication techniques, hardystonite possesses the potential to be applied in biomedical and tissue engineering, mainly bone tissue engineering. A notable potential exists for the newly developed bioceramics to help therapies supply clinical outputs. The promising review paper has been presented by considering major aims to summarize and discuss the most applicable studies carried out for its physical, mechanical, and biological behaviors.

Effect of silk fibroin microparticles on cellular immunity and liver of gilthead seabream (Sparus aurata L.) with and without experimental skin injuries

Silk fibroin (SF) microparticles were administered in the diet of gilthead seabream with or without experimental skin wounds to study the effects on cellular immunity and liver. A commercially available diet was enriched with varying amount of SF: 0, 50 and 100 mg kg-1 (representing the control, SF50 and SF100 diets respectively). The animals were fed for 30 days and half of them were sampled. Similar experimental wounds were then performed on the rest of fish, and they continued to be fed the same diet. At 7 days post-wounding, samples were taken from the wounded fish. Cellular immunity was studied on head kidney leucocytes (phagocytosis, respiratory and peroxidase content) and liver status (histological study and gene expression) were studied. Our results showed that experimental wounds affect both cellular immunity (by decreasing leucocyte respiratory burst and peroxidase activity) and altered liver histology (by inducing vascularisation and congestion of blood vessels). In addition, it influences the expression of genes that serve as markers of oxidative stress, endoplasmic reticulum stress and apoptosis. The highest dose of SF (SF100) increased the phagocytic capacity of leucocytes the most, as well as the expression of genes related to blood vessel formation in the liver. Furthermore, increased expression of antioxidant genes (cat and gsr) and decreased expression of genes related to reticulum endoplasmic stress (grp94 and grp170) and apoptosis (nos and jnk) were detected in these fish fed with SF100 and wounded. In conclusion, fed fish with SF100 had many beneficial effects as cellular immunostimulant and hepatoprotection in wounded fish. Its use could be of great interest for stress management in farmed fish conditions.

Silk Nanofiber Scaffolds with Multiple Angiogenic Cues to Accelerate Wound Regeneration

Niches with multiple physical and chemical cues can influence the fate of cells and tissues in vivo. Simulating the in vivo niche in the design of bioactive materials is a challenge, particularly to tune multiple cues simultaneously in the same system. Here, an assembly strategy was developed to regulate multiple cues in the same scaffold based on the use of two silk nanofiber components that respond differently during the fabrication processes. An aqueous solution containing the two components, amorphous silk nanofibers (ASNFs) and β-sheet-rich silk nanofibers (BSNFs), was sequentially treated with an electrical field and freeze-drying processes where the BSNFs oriented to the electrical field, while the ASNFs formed stable porous structures during the lyophilization process to impact the mechanical properties. Bioactive cargo, such as deferoxamine (DFO), was loaded on the BSNFs to enrich cell responses with the scaffolds. The in vitro results revealed that the loaded DFO and the anisotropic structures with improved mechanical properties resulted in better vascularization than those of the scaffolds without the anisotropic features. The multiple cues in the scaffolds provided angiogenic niches to accelerate wound healing.

Apelin-Overexpressing Neural Stem Cells in Conjunction with a Silk Fibroin Nanofiber Scaffold for the Treatment of Traumatic Brain Injury

Traumatic brain injury (TBI), especially moderate or severe TBI, is one of the most devastating injuries to the nervous system, as the existing therapies for neurological defect repair have difficulty achieving satisfactory results. Neural stem cells (NSCs) therapy is a potentially effective treatment option, especially after specific genetic modifications and when used in combination with biomimetic biological scaffolds. In this study, tussah silk fibroin (TSF) scaffolds with interconnected nanofibrous structures were fabricated using a top-down method. We constructed the apelin-overexpressing NSCs that were cocultured with a TSF nanofiber scaffold (TSFNS) that simulated the extracellular matrix in vitro. To verify the therapeutic efficacy of engineered NSCs in vivo, we constructed TBI models and randomized the C57BL/6 mice into three groups: a control group, an NSC-ctrl group (transplantation of NSCs integrated on TSFNS), and an NSC-apelin group (transplantation of apelin-overexpressing NSCs integrated on TSFNS). The neurological functions of the model mice were evaluated in stages. Specimens were obtained 24 days after transplantation for immunohistochemistry, immunofluorescence, and western blot experiments, and statistical analysis was performed. The results showed that the combination of the TSFNS and apelin overexpression guided extension and elevated the proliferation and differentiation of NSCs both in vivo and in vitro. Moreover, the transplantation of TSFNS-NSCs-Apelin reduced lesion volume, enhanced angiogenesis, inhibited neuronal apoptosis, reduced blood-brain barrier damage, and mitigated neuroinflammation. In summary, TSFNS-NSC-Apelin therapy could build a microenvironment that is more conducive to neural repair to promote the recovery of injured neurological function.

Simulation of Cortical and Cancellous Bone to Accelerate Tissue Regeneration

Different tissues have complex anisotropic structures to support biological functions. Mimicking these complex structures in vitro remains a challenge in biomaterials designs in support of tissue regeneration. Here, inspired by different types of silk nanofibers, a composite materials strategy was pursued towards this challenge. A combination of fabrication methods was utilized to achieve separate control of amorphous and beta-sheet rich silk nanofibers in the same solution. Aqueous solutions containing these two structural types of silk nanofibers were then simultaneously treated with an electric field and with ethylene glycol diglycidyl ether (EGDE). Under these conditions, the beta-sheet rich silk nanofibers in the mixture responded to the electric field while the amorphous nanofibers were active in the crosslinking process with the EGDE. As a result, cryogels with anisotropic structures were prepared, including mimics for cortical- and cancellous-like bone biomaterials as a complex osteoinductive niche. In vitro studies revealed that mechanical cues of the cryogels induced osteodifferentiation of stem cells while the anisotropy inside the cryogels influenced immune reactions of macrophages. These bioactive cryogels also stimulated improved bone regeneration in vivo through modulation of inflammation, angiogenesis and osteogenesis responses, suggesting an effective strategy to develop bioactive matrices with complex anisotropic structures beneficial to tissue regeneration.

Neural tissue-engineered prevascularization in vivo enhances peripheral neuroregeneration via rapid vascular inosculation

Neural tissue engineering techniques typically face a significant challenge, simulating complex natural vascular systems that hinder the clinical application of tissue-engineered nerve grafts (TENGs). Here, we report a subcutaneously pre-vascularized TENG consisting of a vascular endothelial growth factor-induced host vascular network, chitosan nerve conduit, and inserted silk fibroin fibers. Contrast agent perfusion, tissue clearing, microCT scan, and blood vessel 3D reconstruction were carried out continuously to prove whether the regenerated blood vessels were functional. Moreover, histological and electrophysiological evaluations were also applied to investigate the efficacy of repairing peripheral nerve defects with pre-vascularized TENG. Rapid vascular inosculation of TENG pre-vascularized blood vessels with the host vascular system was observed at 4 ​d bridging the 10 ​mm sciatic nerve defect in rats. Transplantation of pre-vascularized TENG in vivo suppressed proliferation of vascular endothelial cells (VECs) while promoting their migration within 14 ​d post bridging surgery. More importantly, the early vascularization of TENG drives axonal regrowth by facilitating bidirectional migration of Schwann cells (SCs) and the bands of Büngner formation. This pre-vascularized TENG increased remyelination, promoted recovery of electrophysiological function, and prevented atrophy of the target muscles when observed 12 weeks post neural transplantation. The neural tissue-engineered pre-vascularization technique provides a potential approach to discover an individualized TENG and explore the innovative neural regenerative process.

Silk Fibroin and Sericin Differentially Potentiate the Paracrine and Regenerative Functions of Stem Cells Through Multiomics Analysis

Silk fibroin (SF) and sericin (SS), the two major proteins of silk, are attractive biomaterials with great potential in tissue engineering and regenerative medicine. However, their biochemical interactions with stem cells remain unclear. In this study, multiomics are employed to obtain a global view of the cellular processes and pathways of mesenchymal stem cells (MSCs) triggered by SF and SS to discern cell-biomaterial interactions at an in-depth, high-throughput molecular level. Integrated RNA sequencing and proteomic analysis confirm that SF and SS initiate widespread but distinct cellular responses and potentiate the paracrine functions of MSCs that regulate extracellular matrix deposition, angiogenesis, and immunomodulation through differentially activating the integrin/PI3K/Akt and glycolysis signaling pathways. These paracrine signals of MSCs stimulated by SF and SS effectively improve skin regeneration by regulating the behavior of multiple resident cells (fibroblasts, endothelial cells, and macrophages) in the skin wound microenvironment. Compared to SS, SF exhibits better immunomodulatory effects in vitro and in vivo, indicating its greater potential as a carrier material of MSCs for skin regeneration. This study provides comprehensive and reliable insights into the cellular interactions with SF and SS, enabling the future development of silk-based therapeutics for tissue engineering and stem cell therapy.

Tough Porous Silk Nanofiber-Derived Cryogels with Osteogenic and Angiogenic Capacity for Bone Repair

Tough porous cryogels with angiogenesis and osteogenesis features remain a design challenge for utility in bone regeneration. Here, building off of the recent efforts to generate tough silk nanofiber-derived cryogels with osteogenic activity, deferoxamine (DFO) is loaded in silk nanofiber-derived cryogels to introduce angiogenic capacity. Both the mechanical cues (stiffness) and the sustained release of DFO from the gels are controlled by tuning the concentration of silk nanofibers in the system, achieving a modulus above 400 kPa and slow release of the DFO over 60 days. The modulus of the cryogels and the released DFO induce osteogenic and angiogenic activity, which facilitates bone regeneration in vivo in femur defects in rat, resulting in faster regeneration of vascularized bone tissue. The tunable physical and chemical cues derived from these nanofibrous-microporous structures support the potential for silk cryogels in bone tissue regeneration.

Fabrication of Silk Hydrogel Scaffolds with Aligned Porous Structures and Tunable Mechanical Properties

The effectiveness of cell culture and tissue regeneration largely depends on the structural and physiochemical characteristics of tissue-engineering scaffolds. Hydrogels are frequently employed in tissue engineering because of their high-water content and strong biocompatibility, making them the ideal scaffold materials for simulating tissue structures and properties. However, hydrogels created using traditional methods have low mechanical strength and a non-porous structure, which severely restrict their application. Herein, we successfully developed silk fibroin glycidyl methacrylate (SF-GMA) hydrogels with oriented porous structures and substantial toughness through directional freezing (DF) and in situ photo-crosslinking (DF-SF-GMA). The oriented porous structures in the DF-SF-GMA hydrogels were induced by directional ice templates and maintained after photo-crosslinking. The mechanical properties, particularly the toughness, of these scaffolds were enhanced compared to the traditional bulk hydrogels. Interestingly, the DF-SF-GMA hydrogels exhibit fast stress relaxation and variable viscoelasticity. The remarkable biocompatibility of the DF-SF-GMA hydrogels was further demonstrated in cell culture. Accordingly, this work reports a method to prepare tough SF hydrogels with aligned porous structures, which can be extensively applied to cell culture and tissue engineering.

Silk-Inorganic Nanoparticle Hybrid Hydrogel as an Injectable Bone Repairing Biomaterial

Silk fibroin is regarded as a promising biomaterial in various areas, including bone tissue regeneration. Herein, Laponite^® (LAP), which can promote osteogenic differentiation, was introduced into regenerated silk fibroin (RSF) to prepare an RSF/LAP hybrid hydrogel. This thixotropic hydrogel is injectable during the operation process, which is favorable for repairing bone defects. Our previous work demonstrated that the RSF/LAP hydrogel greatly promoted the osteogenic differentiation of osteoblasts in vitro. In the present study, the RSF/LAP hydrogel was found to have excellent biocompatibility and significantly improved new bone formation in a standard rat calvarial defect model in vivo. Additionally, the underlying biological mechanism of the RSF/LAP hydrogel in promoting osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) was extensively explored. The results indicate that the RSF/LAP hydrogels provide suitable conditions for the adhesion and proliferation of BMSCs, showing good biocompatibility in vitro. With the increase in LAP content, the alkaline phosphatase (ALP) activity and mRNA and protein expression of the osteogenic markers of BMSCs improved significantly. Protein kinase B (AKT) pathway activation was found to be responsible for the inherent osteogenic properties of the RSF/LAP hybrid hydrogel. Therefore, the results shown in this study firmly suggest such an injectable RSF/LAP hydrogel with good biocompatibility (both in vitro and in vivo) would have good application prospects in the field of bone regeneration.

Influence of lyophilization primary drying time and temperature on porous silk scaffold fabrication for biomedical applications

Lyophilization of protein solutions, such as silk fibroin (silk), produces porous scaffolds useful for tissue engineering (TE). The impact of modifying lyophilization primary drying parameters on scaffold properties has not yet been explored previously. In this work, changes to primary drying duration and temperature were investigated using 3%, 6%, 9%, and 12% (w/v) silk solutions, via protocols labeled as Long Hold, Slow Ramp, and Standard. The 9% and 12% scaffolds were not successfully fabricated using the Standard protocol, while the Long Hold and Slow Ramp protocols resulted in scaffolds from all silk solution concentrations. Scaffolds fabricated using the Long Hold protocol had higher Young's moduli, smaller pore Feret diameters, and faster degradation. To investigate the utility of the different lyophilized scaffolds for in vitro cell culturing, the HepaRG liver cell line was cultured in the 3% to 12% scaffolds fabricated using the Long Hold protocol. The HepaRG cells grown in 3% scaffolds initially had greater lipid accumulation and metabolic activity than the other groups, although these differences were no longer apparent by Day 28. The deoxyribonucleic acid content of the HepaRG cells grown in 3% scaffold group was also initially significantly higher than the other groups. Significant differences in gene expression by 9% scaffolded HepaRG cells (CK19, HNFα) were seen on Day 14 while significant differences by 12% scaffolded HepaRG cells (ALB, APOA4) were seen on Day 28. Overall, modifying the primary drying parameters and silk concentration resulted in lyophilized scaffolds with tunable properties useful for TE applications.

Biomedical applications of silk and its role for intervertebral disc repair

Intervertebral disc (IVD) degeneration (IDD) is the main contributor to chronic low back pain. To date, the present therapies mainly focus on treating the symptoms caused by IDD rather than addressing the problem itself. For this reason, researchers have searched for a suitable biomaterial to repair and/or regenerate the IVD. A promising candidate to fill this gap is silk, which has already been used as a biomaterial for many years. Therefore, this review aims first to elaborate on the different origins from which silk is harvested, the individual composition, and the characteristics of each silk type. Another goal is to enlighten why silk is so suitable as a biomaterial, discuss its functionalization, and how it could be used for tissue engineering purposes. The second part of this review aims to provide an overview of preclinical studies using silk-based biomaterials to repair the inner region of the IVD, the nucleus pulposus (NP), and the IVD's outer area, the annulus fibrosus (AF). Since the NP and the AF differ fundamentally in their structure, different therapeutic approaches are required. Consequently, silk-containing hydrogels have been used mainly to repair the NP, and silk-based scaffolds have been used for the AF. Although most preclinical studies have shown promising results in IVD-related repair and regeneration, their clinical transition is yet to come.

Preliminary study of silk fibroin porous scaffold for oral soft-tissue thickening

OBJECTIVES

This study aimed to investigate the feasibility of three different concentrations of silk-fibroin porous scaffolds applied to oral soft-tissue thickening in vivo.

METHODS

Silk-fibroin scaffolds with three different concentrations (1 wt%, 3 wt%, and 5 wt%; denoted as SF1, SF3, and SF5, respectively) were prepared by freeze drying and methanol enhancement. The scaffolds were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and thermogravimetric analysis. Pore size, porosity, and in vitro degradation rate were also evaluated. The three groups of scaffold materials (the experimental sides) and the collagen matrix (the control side) were implanted into the oral mucosa of New Zealand white rabbits. Changed in mucosa thickness before and 3 months after operation were compared. The in vivo metabolism and regeneration effect of each group were observed by histological hematoxylin-eosin (HE) and Masson staining.

RESULTS

SEM showed that the three groups of scaffolds were all cross-linked porous structures. XRD and FTIR showed that the three scaffolds were dominated by a relatively stable Silk Ⅱ structure, which degraded more slowly in vitro. Among them, SF3 had the largest pore size (133.40 μm±22.85 μm) and moderate porosity (90.05%±6.68%). In vivo results showed that the thickening effect of SF1 was similar to that of the control group because of insufficient space-maintenance property. Meanwhile, the properties of SF3 and SF5 were more stable, and the thickening effect was significantly better than those of the control group. However, unlike SF5 that induced obvious inflammation, SF3 showed better degradation, more fibrosis and angiogenesis, and less inflammatory response in vivo.

CONCLUSIONS

Silk-fibroin scaffolds can be applied to effectively thicken soft tissues, among which SF3 (3 wt%) silk fibroin scaffold exhibited the best physicochemical properties, histocompatibility, and mucosal-thickening effect.

Development of silk fibroin‑sodium alginate scaffold loaded silk fibroin nanoparticles for hemostasis and cell adhesion

During wound healing process, it is essential to promote hemostasis and cell adhesion. Herein, we incorporated a scaffold with nanoparticles to improve the hemostatic properties and stimulate cell adhesion. The nanoparticles were prepared by self-assembling of silk fibroin, and the scaffold loaded nanoparticles were synthesized by crosslinking and freeze-drying. Macroscopical images showed that the nanoparticles distributed uniformly and increased the surface roughness of scaffold pore wall. The addition of nanoparticles decreased the pore size, enhanced the compression strength, lowered the degradation rate, and maintained the resilience and water uptake capacity. Compared with pure scaffold, the scaffold loaded nanoparticles revealed higher blood clotting index and promoted platelets adhesion. Furthermore, in vitro tests showed that scaffold loaded nanoparticles exhibited excellent biocompatibility, and stimulation effects on cell proliferation, migration, and adhesion for both L929 cells and HUVECs. Therefore, the scaffold loaded nanoparticles possessed great potential as a wound dressing for efficient hemostasis and subsequent wound healing.

The conditioned medium from mesenchymal stromal cells pretreated with proinflammatory cytokines promote fibroblasts migration and activation

Human dermal fibroblasts (HDFs) play important roles in all stages of wound healing. However, in nonhealing wounds, fibroblasts are prone to aging, resulting in insufficient migration, proliferation and secretion functions. Recent studies have suggested that mesenchymal stromal cells (MSCs) are conducive to wound healing and cell growth through paracrine cytokine signaling. In our studies, we found that conditioned medium of MSCs pretreated with IFN-γ and TNF-α (IT MSC-CM) has abundant growth factors associated with wound repair. Our in vitro results showed that the effects of IT MSC-CM on promoting cell migration, proliferation and activation in HDFs were better than those of conditioned medium from mesenchymal stromal cells (MSC-CM). Moreover, we embedded a scaffold material containing IT MSC-CM and reconfirmed that cell migration and activation were superior to that in the presence of MSC-CM in vivo. Generally, PDGF-BB is perceived as a promoter of the migration and proliferation of HDFs. Moreover, a high level of PDGF-BB in IT MSC-CM was detected, according to which we guess that the effect on HDFs may be mediated by the upregulation of PDGF-BB. These studies all showed the potential of IT MSC-CM to promote rapid and effective wound healing.

Bone tissue engineering using 3D silk scaffolds and human dental pulp stromal cells epigenetic reprogrammed with the selective histone deacetylase inhibitor MI192

Epigenetics plays a critical role in regulating mesenchymal stem cells’ (MSCs) fate for tissue repair and regeneration. There is increasing evidence that the inhibition of histone deacetylase (HDAC) isoform 3 can enhance MSC osteogenesis. This study investigated the potential of using a selective HDAC2 and 3 inhibitor, MI192, to promote human dental pulp stromal cells (hDPSCs) bone-like tissue formation in vitro and in vivo within porous Bombyx Mori silk scaffolds. Both 2 and 5 wt% silk scaffolds were fabricated and characterised. The 5 wt% scaffolds possess thicker internal lamellae, reduced scaffold swelling and degradation rates, whilst increased compressive modulus in comparison to the 2 wt% silk scaffold. MI192 pre-treatment of hDPSCs on 5 wt% silk scaffold significantly enhanced hDPSCs alkaline phosphatase activity (ALP). The expression of osteoblast-related genes (RUNX2, ALP, Col1a, OCN) was significantly upregulated in the MI192 pre-treated cells. Histological analysis confirmed that the MI192 pre-treated hDPSCs-silk scaffold constructs promoted bone extracellular matrix (ALP, Col1a, OCN) deposition and mineralisation compared to the untreated group. Following 6 weeks of subcutaneous implantation in nude mice, the MI192 pre-treated hDPSCs-silk scaffold constructs enhanced the vascularisation and extracellular matrix mineralisation compared to untreated control. In conclusion, these findings demonstrate the potential of using epigenetic reprogramming and silk scaffolds to promote hDPSCs bone formation efficacy, which provides evidence for clinical translation of this technology for bone augmentation.

Fibrous Structure and Stiffness of Designer Protein Hydrogels Synergize to Regulate Endothelial Differentiation of Bone Marrow Mesenchymal Stem Cells

Matrix stiffness and fibrous structure provided by the native extracellular matrix have been increasingly appreciated as important cues in regulating cell behaviors. Recapitulating these physical cues for cell fate regulation remains a challenge due to the inherent difficulties in making mimetic hydrogels with well-defined compositions, tunable stiffness, and structures. Here, we present two series of fibrous and porous hydrogels with tunable stiffness based on genetically engineered resilin-silk-like and resilin-like protein polymers. Using these hydrogels as substrates, the mechanoresponses of bone marrow mesenchymal stem cells to stiffness and fibrous structure were systematically studied. For both hydrogel series, increasing compression modulus from 8.5 to 14.5 and 23 kPa consistently promoted cell proliferation and differentiation. Nonetheless, the promoting effects were more pronounced on the fibrous gels than their porous counterparts at all three stiffness levels. More interestingly, even the softest fibrous gel (8.5 kPa) allowed the stem cells to exhibit higher endothelial differentiation capability than the toughest porous gel (23 kPa). The predominant role of fibrous structure on the synergistic regulation of endothelial differentiation was further explored. It was found that the stiffness signal activated Yes-associated protein (YAP), the main regulator of endothelial differentiation, via spreading of focal adhesions, whereas fibrous structure reinforced YAP activation by promoting the maturation of focal adhesions and associated F-actin alignment. Therefore, our results shed light on the interplay of physical cues in regulating stem cells and may guide the fabrication of designer proteinaceous matrices toward regenerative medicine.

Biopolymers for Surgical Applications

Biopolymers have gained significant attention as a class of polymer materials with a wide range of applications, especially in the medical and pharmaceutical field. Due to particular characteristics, such as biocompatibility, biodegradability, non-toxicity, and functionality, they have become promising candidates for various surgical applications, including as bioadhesives, sealants, wound dressings, sutures, drug carriers, coating materials, etc. Recent research shows that further modification of biopolymers by advanced techniques can improve their functionality i.e., antibacterial activity, cell viability, drug-releasing capability, good wet adhesion performance, and good mechanical properties. This mini review aims to provide a brief report on the type of biopolymers and recent developments regarding their use in various surgical applications.

Nerve Growth Factor-Laden Anisotropic Silk Nanofiber Hydrogels to Regulate Neuronal/Astroglial Differentiation for Scarless Spinal Cord Repair

Scarless spinal cord regeneration remains a challenge due to the complicated microenvironment at lesion sites. In this study, the nerve growth factor (NGF) was immobilized in silk protein nanofiber hydrogels with hierarchical anisotropic microstructures to fabricate bioactive systems that provide multiple physical and biological cues to address spinal cord injury (SCI). The NGF maintained bioactivity inside the hydrogels and regulated the neuronal/astroglial differentiation of neural stem cells. The aligned microstructures facilitated the migration and orientation of cells, which further stimulated angiogenesis and neuron extensions both in vitro and in vivo. In a severe rat long-span hemisection SCI model, these hydrogel matrices reduced scar formation and achieved the scarless repair of the spinal cord and effective recovery of motor functions. Histological analysis confirmed the directional regenerated neuronal tissues, with a similar morphology to that of the normal spinal cord. The in vitro and in vivo results showed promising utility for these NGF-laden silk hydrogels for spinal cord regeneration while also demonstrating the feasibility of cell-free bioactive matrices with multiple cues to regulate endogenous cell responses.

Patch grafting, strategies for transplantation of organoids into solid organs such as liver

Epithelial cell therapies have been at an impasse because of inefficient methods of transplantation to solid organs. Patch grafting strategies were established enabling transplantation of ≥10^7th organoids/patch of porcine GFP+ biliary tree stem/progenitors into livers of wild type hosts. Grafts consisted of organoids embedded in soft (~100 Pa) hyaluronan hydrogels, both prepared in serum-free Kubota's Medium; placed against target sites; covered with a silk backing impregnated with more rigid hyaluronan hydrogels (~700 Pa); and use of the backing to tether grafts with sutures or glue to target sites. Hyaluronan coatings (~200-300 Pa) onto the serosal surface of the graft served to minimize adhesions with neighboring organs. The organ's clearance of hyaluronans enabled restoration of tissue-specific paracrine and systemic signaling, resulting in return of normal hepatic histology, with donor parenchymal cells uniformly integrated amidst host cells and that had differentiated to mature hepatocytes and cholangiocytes. Grafts containing donor mature hepatocytes, partnered with endothelia, and in the same graft biomaterials as for stem/progenitor organoids, did not engraft. Engraftment occurred if porcine liver-derived mesenchymal stem cells (MSCs) were co-transplanted with donor mature cells. RNA-seq analyses revealed that engraftment correlated with expression of matrix-metalloproteinases (MMPs), especially secreted isoforms that were found expressed strongly by organoids, less so by MSCs, and minimally, if at all, by adult cells. Engraftment with patch grafting strategies occurred without evidence of emboli or ectopic cell distribution. It was successful with stem/progenitor organoids or with cells with a source(s) of secreted MMP isoforms and offers significant potential for enabling cell therapies for solid organs.

Advances in the synthesis and application of self-assembling biomaterials

The present study scrutinized some of the crucial advancements in the synthesis and functionalisation of self-assembling biomaterials for application in biomedicine. The basic concept of self-organization was discussed along with the mechanisms and methods involved in its implementation with biomaterials. Further, several recent applications of this technology in the biological and medical domain, and the avenues for future research and development were presented. This study brought to focus the vast potential of basic and applied research involved, especially in the context of hybrids and composites, as well as the difference in pace of new developments for different types of biomolecular materials. As nanobiotechnology matures, the tools and techniques available for developing and controlling self-assembled biomaterials as well as studying their interaction with biological tissue, will grow exponentially. Presently, self-assembly remains a potent tool for the synthesis of functional biomaterials.

Nerve Guidance Conduits with Hierarchical Anisotropic Architecture for Peripheral Nerve Regeneration

Nerve guidance conduits with multifunctional features could offer microenvironments for improved nerve regeneration and functional recovery. However, the challenge remains to optimize multiple cues in nerve conduit systems due to the interplay of these factors during fabrication. Here, a modular assembly for the fabrication of nerve conduits is utilized to address the goal of incorporating multifunctional guidance cues for nerve regeneration. Silk-based hollow conduits with suitable size and mechanical properties, along with silk nanofiber fillers with tunable hierarchical anisotropic architectures and microporous structures, are developed and assembled into conduits. These conduits supported improves nerve regeneration in terms of cell proliferation (Schwann and PC12 cells) and growth factor secretion (BDNF, brain-derived neurotrophic factor) in vitro, and the in vivo repair and functional recovery of rat sciatic nerve defects. Nerve regeneration using these new conduit designs is comparable to autografts, providing a path towards future clinical impact.

The molecular conformation of silk fibroin regulates osteogenic cell behavior by modulating the stability of the adsorbed protein-material interface

Silk fibroin (SF) can be used to construct various stiff material interfaces to support bone formation. An essential preparatory step is to partially transform SF molecules from random coils to β-sheets to render the material water insoluble. However, the influence of the SF conformation on osteogenic cell behavior at the material interface remains unknown. Herein, three stiff SF substrates were prepared by varying the β-sheet content (high, medium, and low). The substrates had a comparable chemical composition, surface topography, and wettability. When adsorbed fibronectin was used as a model cellular adhesive protein, the stability of the adsorbed protein-material interface, in terms of the surface stability of the SF substrates and the accompanying fibronectin detachment resistance, increased with the increasing β-sheet content of the SF substrates. Furthermore, (i) larger areas of cytoskeleton-associated focal adhesions, (ii) higher orders of cytoskeletal organization and (iii) more elongated cell spreading were observed for bone marrow-derived mesenchymal stromal cells (BMSCs) cultured on SF substrates with high vs. low β-sheet contents, along with enhanced nuclear translocation and activation of YAP/TAZ and RUNX2. Consequently, osteogenic differentiation of BMSCs was stimulated on high β-sheet substrates. These results indicated that the β-sheet content influences osteogenic differentiation of BMSCs on SF materials in vitro by modulating the stability of the adsorbed protein-material interface, which proceeds via protein-focal adhesion-cytoskeleton links and subsequent intracellular mechanotransduction. Our findings emphasize the role of the stability of the adsorbed protein-material interface in cellular mechanotransduction and the perception of stiff SF substrates with different β-sheet contents, which should not be overlooked when engineering stiff biomaterials.

Injectable Desferrioxamine-Laden Silk Nanofiber Hydrogels for Accelerating Diabetic Wound Healing

Dysangiogenesis and chronic inflammation are two critical reasons for diabetic foot ulcers. Desferrioxamine (DFO) was used clinically in the treatment of diabetic foot ulcers by repeated injections because of its capacity to induce vascularization. Biocompatible carriers that release DFO slowly and facilitate healing simultaneously are preferable options to accelerate the healing of diabetic wounds. Here, DFO-laden silk nanofiber hydrogels that provided a sustained release of DFO for more than 40 days were used to treat diabetic wounds. The DFO-laden hydrogels stimulated the healing of diabetic wounds. In vitro cell studies revealed that the DFO-laden hydrogels modulated the migration and gene expression of endothelial cells, and they also tuned the inflammation behavior of macrophages. These results were confirmed in an in vivo diabetic wound model. The DFO-laden hydrogels alleviated dysangiogenesis and chronic inflammation in the diabetic wounds, resulting in a more rapid wound healing and increased collagen deposition. Both in vitro and in vivo studies suggested potential clinical applications of these DFO-laden hydrogels in the treatment of diabetic ulcers.

Construction of a Silk Fibroin/Polyethylene Glycol Double Network Hydrogel with Co-Culture of HUVECs and UCMSCs for a Functional Vascular Network

The success of complex tissue and internal organ reconstruction relies principally on the fabrication of a 3D vascular network, which guarantees the delivery of oxygen and nutrients in addition to the disposal of waste. In this study, a rapidly forming cell-encapsulated double network (DN) hydrogel is constructed by an ultrasonically activated silk fibroin network and bioorthogonal-mediated polyethylene glycol network. This DN hydrogel can be solidified within 10 s, and its mechanical property gradually increases to ∼20 kPa after 30 min. This work also demonstrates that coencapsulation of human umbilical vein endothelial cells (HUVECs) and umbilical cord-derived mesenchymal stem cells (UCMSCs) into the DN hydrogel can facilitate the formation of more mature vessels and complete the capillary network in comparison with the hydrogels encapsulated with a single cell type both in vitro and in vivo. Taking together, the DN hydrogel, combined with coencapsulation of HUVECs and UCMSCs, represents a strategy for the construction of a functional vascular network.

A medical adhesive used in a wet environment by blending tannic acid and silk fibroin

A multifunctional and effective medical adhesive with a combination of high toughness and superior adhesion is highly desired in biomedical fields. However, clinical application of medical adhesives is still limited due to their weak adhesion to wet tissue. In this study, a novel medical adhesive called TASK composed of tannic acid (TA) and silk fibroin (SF) based on polyphenol-gel systems was developed. TASK powder was prepared by a simple physical mixture of pyrogallol-rich tannic acid and silk fibroin in aqueous solution and further freeze drying, which was stable and convenient for sterilization before clinical application. The TASK composite gel was formed by just adding water to the TASK powder. TASK showed improved wet-adhesive properties and stability; its adhesion strength after 5 h in water reached 180.9 ± 27.4 kPa. ATR-FTIR results indicated that the plentiful phenolic hydroxyl groups in TA allowed TASK to maintain adhesion to tissue in a wet environment. Furthermore, no chemical modification or covalent cross-linking was required for this wet-adhesive TASK which may facilitate its clinical application.

Usnic-Acid-Functionalized Silk Fibroin Composite Scaffolds for Cutaneous Wounds Healing

Despite the progress in chronic wound treatment, antibacterial cutaneous scaffold with high efficiency in wound healing is still the hot spot in the field. In present study, a functionalized silk fibroin (SF) cutaneous scaffold incorporated with natural medicine usnic acid (UA) is investigated, in which UA is used as an antibacterial and wound-healing reagent. Via electrospinning, UA-SF mixture is fabricated into UA-SF composite scaffold (USCS), which is composed of uniform nanofibers with average diameters of around 360 ± 10 nm. The interwoven nanofibers form mesh structure providing sufficient moisture permeability for scaffold. With methanol treatment, USCS presents improved mechanical properties and stability to protease XIV. In the presence of USCS, the growth rate of both Gram-positive and Gram-negative bacteria, including Staphylococcus aureus, Streptococci pyogenes, Escherichia coli, and Pseudomonas aeruginosa, is significantly inhibited in plate culture and suspension assays. In a cutaneous excisional mouse wound model, USCS presents a significant increase of wound closure rate, compared with pure SF scaffold and commercial dressing, Tegaderm Hydrocolloid ^3M . The histological assessments further prove that USCS can enhance re-epithelialization, vascularization, and collagen deposition in wound site to promote the wound-healing process, which indicates the potential application of USCS in chronic wound treatment.

Bioinspired Materials for Wound Healing Application: The Potential of Silk Fibroin

Nature is an incredible source of inspiration for scientific research due to the multiple examples of sophisticated structures and architectures which have evolved for billions of years in different environments. Numerous biomaterials have evolved toward high level functions and performances, which can be exploited for designing novel biomedical devices. Naturally derived biopolymers, in particular, offer a wide range of chances to design appropriate substrates for tissue regeneration and wound healing applications. Wound management still represents a challenging field which requires continuous efforts in scientific research for definition of novel approaches to facilitate and promote wound healing and tissue regeneration, particularly where the conventional therapies fail. Moreover, big concerns associated to the risk of wound infections and antibiotic resistance have stimulated the scientific research toward the definition of products with simultaneous regenerative and antimicrobial properties. Among the bioinspired materials for wound healing, this review focuses attention on a protein derived from the silkworm cocoon, namely silk fibroin, which is characterized by incredible biological features and wound healing capability. As demonstrated by the increasing number of publications, today fibroin has received great attention for providing valuable options for fabrication of biomedical devices and products for tissue engineering. In combination with antimicrobial agents, particularly with silver nanoparticles, fibroin also allows the development of products with improved wound healing and antibacterial properties. This review aims at providing the reader with a comprehensive analysis of the most recent findings on silk fibroin, presenting studies and results demonstrating its effective role in wound healing and its great potential for wound healing applications.

Injectable hydrogel systems with multiple biophysical and biochemical cues for bone regeneration

Bone regeneration is a complex process in which angiogenesis and osteogenesis are crucial. Introducing multiple angiogenic and osteogenic cues simultaneously into a single system and tuning these cues to optimize the niche remains a challenge for bone tissue engineering. Herein, based on our injectable biomimetic hydrogels composed of silk nanofibers (SNF) and hydroxyapatite nanoparticles (HA), deferoxamine (DFO) and bone morphogenetic protein-2 (BMP-2) were loaded on SNF and HA to introduce more angiogenic and osteogenic cues. The angiogenesis and osteogenesis capacity of injectable hydrogels could be regulated by tuning the delivery of DFO and BMP-2 independently, resulting in vascularization and bone regeneration in cranial defects. The angiogenesis and osteogenesis outcomes accelerated the regeneration of vascularized bones toward similar composition and structure to natural bones. Therefore, the multiple biophysical and chemical cues provided by the nanofibrous structures, organic-inorganic compositions, and chemical and biochemical angiogenic and osteogenic inducing cues suggest the potential for clinical applicability of these hydrogels in bone tissue engineering.

Electric field-driven building blocks for introducing multiple gradients to hydrogels

Gradient biomaterials are considered as preferable matrices for tissue engineering due to better simulation of native tissues. The introduction of gradient cues usually needs special equipment and complex process but is only effective to limited biomaterials. Incorporation of multiple gradients in the hydrogels remains challenges. Here, beta-sheet rich silk nanofibers (BSNF) were used as building blocks to introduce multiple gradients into different hydrogel systems through the joint action of crosslinking and electric field. The blocks migrated to the anode along the electric field and gradually stagnated due to the solution-hydrogel transition of the systems, finally achieving gradient distribution of the blocks in the formed hydrogels. The gradient distribution of the blocks could be tuned easily through changing different factors such as solution viscosity, which resulted in highly tunable gradient of mechanical cues. The blocks were also aligned under the electric field, endowing orientation gradient simultaneously. Different cargos could be loaded on the blocks and form gradient cues through the same crosslinking-electric field strategy. The building blocks could be introduced to various hydrogels such as Gelatin and NIPAM, indicating the universality. Complex niches with multiple gradient cues could be achieved through the strategy. Silk-based hydrogels with suitable mechanical gradients were fabricated to control the osteogenesis and chondrogenesis. Chondrogenic-osteogenic gradient transition was obtained, which stimulated the ectopic osteochondral tissue regeneration in vivo. The versatility and highly controllability of the strategy as well as multifunction of the building blocks reveal the applicability in complex tissue engineering and various interfacial tissues.

Tough Anisotropic Silk Nanofiber Hydrogels with Osteoinductive Capacity

Multiple physical cues such as hierarchical microstructures, topography, and stiffness influence cell fate during tissue regeneration. Yet, introducing multiple physical cues to the same biomaterial remains a challenge. Here, a synergistic cross-linking strategy was developed to fabricate protein hydrogels with multiple physical cues based on combinations of two types of silk nanofibers. β-sheet-rich silk nanofibers (BSNFs) were blended with amorphous silk nanofibers (ASNFs) to form composite nanofiber systems. The composites were transformed into tough hydrogels through horseradish peroxidase (HRP) cross-linking in an electric field, where ASNFs were cross-linked with HRP, while BSNFs were aligned by the electrical field. Anisotropic morphologies and higher stiffness of 120 kPa were achieved. These anisotropic hydrogels induced osteogenic differentiation and the aligned aggregation of stem cells in vitro while also exhibiting osteoinductive capacity in vivo. Improved tissue outcomes with the hydrogels suggest promising applications in bone tissue engineering, as the processing strategy described here provides options to form hydrogels with multiple physical cues.

An efficient functionalization of dexamethasone-loaded polymeric scaffold with [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane coupling agent for bone regeneration: Synthesis, characterization, and in vitro evaluation

In this study, dexamethasone-loaded gelatin–starch scaffolds were fabricated by the freeze-drying technique under different cooling temperatures and polymeric compositions. The constructs were modified via [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane coupling agent in order to produce a bioactive network structure for bone tissue engineering applications. Herein, the synergistic effect of [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane and dexamethasone was examined on the bioactivity and osteogenic behavior of scaffolds. Based on scanning electron microscopy micrographs, more fine pores were formed at higher freezing temperatures. The prepared microstructure at a rapid freezing rate resulted in diminished mechanical properties and a greater level of swelling and durability compared with a slow freezing rate. According to the acquired results, the mechanical strength decreased, while both absorption capacity and mass loss rate increased as a function of starch addition. Furthermore, the enhancement of hydrophilicity and reduction of mechanical stability enhanced the dexamethasone release levels. In addition, the synthesized constructs confirmed the positive effect of [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane and dexamethasone on biomimetic mineralization of the scaffolds. Supporting the cellular adhesion and proliferation alongside the expression of alkaline phosphatase, especially in the presence of dexamethasone, was the other advantage of synthetic scaffolds as a bone reconstructive substitute. Accordingly, drug-loaded hybrid constructs seem to be promising for further preclinical and clinical investigations in bone tissue engineering.

Natural Nanofiber Shuttles for Transporting Hydrophobic Cargo into Aqueous Solutions

Hydrophobic biomolecules realize their functions in vivo in aqueous environments, often through a delicate balance of amphiphilicity and chaperones. Introducing exogenous hydrophobic biomolecules into in vivo aqueous systems is a challenge in drug delivery and regenerative medicine, where labile linkers, carriers, and fusions or chimeric molecules are often designed to facilitate such aqueous interfaces. Here, we utilize naturally derived silk nanofiber shuttles with the capacity to transport hydrophobic cargos directly into aqueous solutions. These nanofibers disperse in organic solvents and in aqueous solutions because of their inherent amphiphilicity, with enriched hydrophobicity and strategically interspersed negatively charged groups. Hydrophobic molecules loaded on these shuttles in organic solvent-water systems separated from the solvent after centrifugation. These concentrated hydrophobic molecule-loaded nanofibers could then be dispersed into aqueous solution directly without modification. These shuttle systems were effective for different hydrophobic molecules such as drugs, vitamins, and dyes. Improved biological stability and functions of hydrophobic cargos after loading on these nanofibers suggest potential applications in drug delivery, cosmetology, medical diagnosis, and related health fields, with a relatively facile process.

Insights into the angiogenic effects of nanomaterials: mechanisms involved and potential applications

The vascular system, which transports oxygen and nutrients, plays an important role in wound healing, cardiovascular disease treatment and bone tissue engineering. Angiogenesis is a complex and delicate regulatory process. Vascular cells, the extracellular matrix (ECM) and angiogenic factors are indispensable in the promotion of lumen formation and vascular maturation to support blood flow. However, the addition of growth factors or proteins involved in proangiogenic effects is not effective for regulating angiogenesis in different microenvironments. The construction of biomaterial scaffolds to achieve optimal growth conditions and earlier vascularization is undoubtedly one of the most important considerations and major challenges among engineering strategies. Nanomaterials have attracted much attention in biomedical applications due to their structure and unique photoelectric and catalytic properties. Nanomaterials not only serve as carriers that effectively deliver factors such as angiogenesis-related proteins and mRNA but also simulate the nano-topological structure of the primary ECM of blood vessels and stimulate the gene expression of angiogenic effects facilitating angiogenesis. Therefore, the introduction of nanomaterials to promote angiogenesis is a great helpful to the success of tissue regeneration and some ischaemic diseases. This review focuses on the angiogenic effects of nanoscaffolds in different types of tissue regeneration and discusses the influencing factors as well as possible related mechanisms of nanomaterials in endothelial neovascularization. It contributes novel insights into the design and development of novel nanomaterials for vascularization and therapeutic applications.

Vascular Pedicle and Microchannels: Simple Methods Toward Effective In Vivo Vascularization of 3D Scaffolds

Poor vascularization remains a key limiting factor in translating advances in tissue engineering to clinical applications. Vascular pedicles (large arteries and veins) isolated in plastic chambers are known to sprout an extensive capillary network. This study examined the effect vascular pedicles and scaffold architecture have on vascularization and tissue integration of implanted silk scaffolds. Porous silk scaffolds with or without microchannels are manufactured to support implantation of a central vascular pedicle, without a chamber, implanted in the groin of Sprague Dawley rats, and assessed morphologically and morphometrically at 2 and 6 weeks. At both time points, blood vessels, connective tissue, and an inflammatory response infiltrate all scaffold pores externally, and centrally when a vascular pedicle is implanted. At week 2, vascular pedicles significantly increase the degree of scaffold tissue infiltration, and both the pedicle and the scaffold microchannels significantly increase vascular volume and vascular density. Interestingly, microchannels contribute to increased scaffold vascularity without affecting overall tissue infiltration, suggesting a direct effect of biomaterial architecture on vascularization. The inclusion of pedicles and microchannels are simple and effective proangiogenic techniques for engineering thick tissue constructs as both increase the speed of construct vascularization in the early weeks post in vivo implantation.

Injectable Silk-Vaterite Composite Hydrogels with Tunable Sustained Drug Release Capacity

Improving the efficiency of chemotherapy remains a key challenge in drug delivery. Many drug carriers have been designed to achieve multifunctional factors as part of their performance, including controlled release, dispersibility in aqueous environments, and targeting to cancer sites. However, it is difficult to optimize multiple properties simultaneously for a single carrier system. Here, synergistic carriers composed of vaterite microspheres and silk nanofiber hydrogels were developed to improve the dispersibility of vaterite spheres and the control of drug delivery without compromising the injectability or sensitivity to pH. The vaterite microspheres were dispersed homogeneously and remained stable in the silk nanofiber hydrogels. Doxorubicin (DOX) was effectively loaded on the vaterite spheres and silk nanofibers, forming synergistic silk-vaterite hydrogel delivery systems. The sustained delivery of DOX was tuned and controlled by vaterite stability and the DOX content loaded on the spheres and nanofibers. The cytotoxicity was regulated via the controlled delivery of DOX, suggesting the possibility of optimizing chemotherapeutic strategies. These silk-vaterite delivery hydrogels suggest a useful strategy for designing novel delivery systems for improved delivery and therapeutic benefits.

Injectable Silk Nanofiber Hydrogels for Sustained Release of Small-Molecule Drugs and Vascularization

Strategies to control neovascularization in damaged tissues remain a key issue in regenerative medicine. Unlike most reported desferrioxamine (DFO)-loaded systems where DFO demonstrates a burst release, here we attain zero-order release behavior above 40 days. This outcome was achieved by blending DFO with silk nanofibers with special hydrophilic-hydrophobic properties. The special silk nanofibers showed strong physical binding capacity with DFO, avoiding chemical cross-linking. Using these new biomaterials in vivo in a rat wound model suggested that the DFO-loaded silk nanofiber hydrogel systems stimulated angiogenesis by the sustained release of DFO, but also facilitated cell migration and tissue ingrowth. These features resulted in faster formation of a blood vessel network in the wounds, as well improved healing when compared to the free DFO system. The DFO-loaded systems are also suitable for the regeneration of other tissues, such as nerve and bone, suggesting universality in the biomedical field.

Water-insoluble amorphous silk fibroin scaffolds from aqueous solutions

Regenerated silk fibroin (RSF) is emerging as promising biomaterial for regeneration, drug delivery and optical devices, with continued demand for mild, all-aqueous processes to control microstructure and the performance. Here, temperature control of assembly kinetics was introduced to prepare the water-insoluble scaffolds from neutral aqueous solutions of RSF protein. Higher temperatures were used to accelerate the assembly rate of the silk fibroin protein chains in aqueous solution and during the lyophilization process, resulting in water-insoluble scaffold formation. The scaffolds were mainly composed of amorphous states of the silk fibroin chains, endowing softer mechanical properties. These scaffolds also showed nanofibrous structures, improved cell proliferation in vitro and enhanced neovascularization and tissue regeneration in vivo than previously reported silk fibroin scaffolds. These results suggest utility of silk scaffolds in soft tissue regeneration.

Anisotropic Biomimetic Silk Scaffolds for Improved Cell Migration and Healing of Skin Wounds

Improved and more rapid healing of full-thickness skin wounds remains a major clinical need. Silk fibroin (SF) is a natural protein biomaterial that has been used in skin repair. However, there has been little effort aimed at improving skin healing through tuning the hierarchical microstructure of SF-based matrices and introducing multiple physical cues. Recently, enhanced vascularization was achieved with SF scaffolds with nanofibrous structures and tunable secondary conformation of the matrices. We hypothesized that anisotropic features in nanofibrous SF scaffolds would promote cell migration, neovascularization, and tissue regeneration in wounds. To address this hypothesis, SF nanofibers were aligned in an electric field to form anisotropic porous scaffolds after lyophilization. In vitro and in vivo studies indicated good cytocompatibility, and improved cell migration and vascularization than nanofibrous scaffolds without these anisotropic features. These improvements resulted in more rapid wound closure, tissue ingrowth, and the formation of new epidermis, as well as higher collagen deposition with a structure similar to the surrounding native tissue. The new epidermal layers and neovascularization were achieved by day 7, with wound healing complete by day 28. It was concluded that anisotropic SF scaffolds alone, without a need for growth factors and cells, promoted significant cell migration, vascularization, and skin regeneration and may have the potential to effectively treat dermal wounds.

In Situ Forming Injectable Silk Fibroin Hydrogel Promotes Skin Regeneration in Full Thickness Burn Wounds

Full-thickness skin wounds, associated with deep burns or chronic wounds pose a major clinical problem. Herein, the development of in situ forming hydrogel using a natural silk fibroin (SF) biomaterial for treating burn wounds is reported. Blends of SF solutions isolated from Bombyx mori and Antheraea assama show inherent self-assembly between silk proteins and lead to irreversible gelation at body temperature. Investigation of the gelation mechanism reveals crosslinking due to formation of β-sheet structures as examined by X-ray diffraction and Fourier transform infrared spectroscopy. The SF hydrogel supports proliferation of primary human dermal fibroblasts and migration of keratinocytes comparable to collagen gel (Col) as examined under in vitro conditions. The SF hydrogel also provides an instructive and supportive matrix to the full-thickness third-degree burn wounds in vivo. A 3-week comparative study with Col indicates that SF hydrogel not only promotes wound healing but also shows transitions from inflammation to proliferation stage as observed through the expression of TNF-α and CD163 genes. Further, deposition and remodeling of collagen type I and III fibers suggests an enhanced overall tissue regeneration. Comparable results with Col demonstrate the SF hydrogel as an effective and inexpensive formulation toward a potential therapeutic approach for burn wound treatment.