Computationally Guided Molecular Design to Minimize the LE/CT Gap in D-π-A Fluorinated Triarylboranes for Efficient TADF via D and π-Bridge Tuning

An Air-Stable, Single-Component Iridium Precatalyst for the Borylation of C-H Bonds on Large to Miniaturized Scales

The functionalization of C-H bonds enables the modification of complex molecules, often with the intention of forming compound libraries. The borylation of aryl C-H bonds is a widely used class of C-H bond functionalization, and conventional catalyst systems for the borylation of C-H bonds consist of an iridium source and an N,N-ligand, in conjunction with pinacolborane, to form the active iridium(III) tris(boryl) catalyst. These multicomponent catalyst systems complicate borylation reactions at large and small scales, due to the air sensitivity of the most common iridium precursor [Ir(cod)OMe]2, and, particularly on small scale, the challenges associated with dispensing multiple components with differing solubilities or that are air-sensitive. We describe the discovery of an air-stable, single-component iridium precatalyst, [(tmphen)Ir(coe)2Cl], that generates the same active iridium(III) tris(boryl) catalyst and reacts with higher turnovers, comparable selectivity, and similar scope to those of known catalyst systems for the borylation of aryl and heteroaryl C-H bonds. We show how the development of this precatalyst enables reactions to be run on submicromole scale in a high-throughput experimentation format in conjunction with ChemBead technology, and with a second diversification step that illustrates the potential to diversify structures by chemical sequences involving catalytic reactions, including C-H bond functionalizations, on submicromole scales in the same reaction vessel.

Facilitating intrinsic delayed fluorescence of conjugated emitters by inter-chromophore interaction

Delayed fluorescence (DF) is a unique emitting phenomenon of great interest for important applications in organic optoelectronics. In general, DF requires well-separated frontier orbitals, inherently corresponding to charge transfer (CT)-type emitters. However, facilitating intrinsic DF for local excited (LE)-type conjugated emitters remains very challenging. Aiming to overcome this obstacle, we demonstrate a new molecular design strategy with a DF-inactive B,N-multiple resonance (MR) emitter as a model system. Without the necessity of doping with heavy atoms, we synthesized a co-facial dimer in which an excimer-like state (Sexc) was expected to facilitate efficient reverse intersystem crossing (RISC, T1 → Sexc) and intrinsic DF. Benefiting from greatly enhanced SOC and reduced ΔE ST, the proof-of-concept emitter Np-2CzB exhibited k RISC up to 6.5 × 105 s-1 and intrinsic DF with >35% contribution (Φ DF/Φ F) in dilute solution. Further investigation indicated that Sexc state formation relies on an optimized co-facial distance (d = ∼4.7 Å), strong inter-chromophore interaction (J coul > 450 cm-1) and a rigid structure (Γ S1→S0 < 350 cm-1). Although our strategy was demonstrated with a B,N-MR emitter, it can be applicable to many LE-type conjugated emitters without intrinsic DF. By triggering potential DF emission, many classic emitters might play a more important role in optoelectronics.

Benchmarking Charge-Transfer Excited States in TADF Emitters: ΔDFT Outperforms TD-DFT for Emission Energies

Charge-transfer (CT) excited states are crucial to organic light-emitting diodes (OLEDs), particularly to those based on thermally activated delayed fluorescence (TADF). However, accurately modeling CT states remains challenging, even with modern implementations of (time-dependent) density functional theory [(TD-)DFT], especially in a dielectric environment. To identify shortcomings and improve the methodology, we previously established the STGABS27 benchmark set with highly accurate experimental references for the adiabatic energy gap between the lowest singlet and triplet excited states (ΔEST). Here, we diversify this set to the STGABS27-EMS benchmark by including experimental emission energies (Eem) and use this new set to (re)-evaluate various DFT-based approaches. Surprisingly, these tests demonstrate that a state-specific (un)restricted open-shell Kohn-Sham (U/ROKS) DFT coupled with a polarizable continuum model for perturbative state-specific nonequilibrium solvation (ptSS-PCM) provides exceptional accuracy for predicting Eem over a wide range of density functionals. In contrast, the main workhorse of the field, Tamm-Dancoff-approximated TD-DFT (TDA-DFT) paired with the same ptSS-PCM, is distinctly less accurate and strongly functional-dependent. More importantly, while TDA-DFT requires the choice of two very different density functionals for good performance on either ΔEST or Eem, the time-independent U/ROKS/PCM approaches deliver excellent accuracy for both quantities with a wide variety of functionals.

Synthetic progress of organic thermally activated delayed fluorescence emitters via C-H activation and functionalization

Thermally activated delayed fluorescence (TADF) emitters have become increasingly prominent due to their promising applications across various fields, prompting a continuous demand for developing reliable synthetic methods to access them. This review aims to highlight the progress made in the last decade in synthesizing organic TADF compounds through C-H bond activation and functionalization. The review begins with a brief introduction to the basic features and design principles of TADF emitters. It then provides an overview of the advantages and concise development of C-H bond transformations in constructing TADF emitters. Subsequently, it summarizes both transition-metal-catalyzed and non-transition-metal-promoted C-H bond transformations used for the synthesis of TADF emitters. Finally, the review gives an outlook on further challenges and potential directions in this field.

Insights into mechanistic interpretation of crystalline-state reddish phosphorescence of non-planar π-conjugated organoboron compounds

Metal-free room-temperature phosphorescent (RTP) materials are attracting attention in such applications as organic light-emitting diodes and bioimaging. However, the chemical structures of RTP materials reported thus far are mostly predominantly based on π-conjugated systems incorporating heavy atoms such as bromine atoms or carbonyl groups, resulting in limited structural diversity. On the other hand, triarylboranes are known for their strong Lewis acidity and deep LUMO energy levels, but few studies have reported on their RTP properties. In this study, we discovered that compounds based on a tetracyclic structure containing boron, referred to as benzo[d]dithieno[b,f]borepins, exhibit strong solid-state reddish phosphorescence even in air. Quantum chemical calculations, including those for model compounds, revealed that the loss of planarity of the tetracyclic structure increases spin-orbit coupling matrix elements, thereby accelerating the intersystem crossing process. Moreover, single-crystal X-ray structural analysis and natural energy decomposition analysis suggested that the borepin compounds without bromine or oxygen atoms, unlike typical RTP materials, exhibit red-shifted phosphorescence in the crystalline state owing to structural relaxation in the T1 state. Additionally, the borepin compounds showed potential application as bioimaging dyes.

Modulating Efficiency and Color of Thermally Activated Delayed Fluorescence by Rationalizing the Substitution Effect

Thermally activated delayed fluorescence (TADF) constitutes the process by which third-generation organic light-emitting diodes (OLEDs) are being designed and produced. Despite several years of trial-and-error attempts, mainly driven by chemical intuition about how to improve a certain aspect of the process, few studies focused on the in-depth description of its two key properties: efficiency of the T1 → S1 intersystem crossing and further S1 → S0 emission. Here, by means of a newly developed theoretical formalism, we propose a systematic rationalization of the substituent effect in a paradigmatic class of OLED compounds, based on phenothiazine-dibenzothiophene-S,S-dioxide, known as PTZ-DBTO2. Our methodology allows to discern among geometrical and electronic effects induced by the substituent, deeply understanding the relationships existing between charge transfer, spin density, geometrical deformations, and energy modulations between electronic states. By our results, we can finally elucidate, depending on the substituent, the fate of the overall TADF process, quantitatively assessing its efficiency and predicting the color emission. Moreover, the general terms by which this methodology was developed allow its application to any chromophore of interest.

Role of Bridging Groups in Regulating the Luminescence and Charge Transfer Properties of Thermally Activated Delayed Fluorescence Molecules: A Theoretical Perspective

Organic emitters with a simultaneous combination of aggregation-induced emission (AIE) and thermally activated delayed fluorescence (TADF) characteristics are in great demand due to their excellent comprehensive performances toward efficient organic light-emitting diodes (OLEDs), biomedical imaging, and the telecommunications field. However, the development of efficient AIE-TADF materials remains a substantial challenge. In this work, light-emitting properties of two AIE-TADF molecules with different bridging groups ICz-BP and ICz-DPS are theoretically investigated in the solid state with the combined quantum mechanics/molecular mechanics (QM/MM) method and the thermal vibration correlation function (TVCF) theory. The research indicates that the C═O bridging bond in ICz-BP is more favorable than the S═O bridging bond in ICz-DPS for enhancing the planarity of the acceptor, increasing conjugation, and thereby elevating the transition dipole moment density. Simultaneously, the stacking pattern of ICz-BP in the solid facilitates a reduction in energy gap between S1 and T1 (ΔEST), achieving rapid reverse intersystem crossing rate (kRISC). Furthermore, compared to toluene, the stacking patterns of ICz-BP and ICz-DPS in the solid effectively suppress the out-of-plane wagging vibration of the acceptor, thereby inhibiting the loss of nonradiative energy in the excited state and realizing aggregation-induced emission. Moreover, the charge transport properties of both electrons and holes in ICz-BP are found to be higher than the corresponding rates in ICz-DPS, attributed to the smaller internal reorganization energy of ICz-BP in the solid state. Additionally, the calculations reveal a more balanced charge transport characteristic in ICz-BP, contributing to efficient exciton recombination and emission and ultimately mitigating efficiency roll-off. Based on these computational results, we aim to unveil the relationship between molecular structure and light-emitting properties, aiding in the design and development of efficient AIE-TADF devices.

Theoretical design and performance prediction of deep red/near-infrared thermally activated delayed fluorescence molecules with through space charge transfer

Thermally activated delayed fluorescence (TADF) molecules with through-space charge transfer (TSCT) have attracted much attention in recent years because of their ability to simultaneously reduce the energy difference (ΔEST) and enlarge the spin-orbit coupling (SOC). In this paper, 40 molecules are theoretically designed by changing the different substitution positions of the donors and acceptors, and systematically investigated based on the first-principles calculations and excited-state dynamics study. It is found that the emission wavelengths of v-shaped molecules with intramolecular TSCT are larger than those of the molecules without TSCT. Therefore, the intramolecular TSCT can induce the red-shift of the emission and realize the deep-red/near-infrared emission. Besides intramolecular TSCT can simultaneously increase the SOC as well as the oscillator strength and reduce the ΔEST. In addition, PXZ or PTZ can also favor the realization of smaller ΔEST and red-shift emission. Our calculations suggest that intramolecular TSCT and suitable donors (-PXZ or -PTZ) are an effective strategy for the design of efficient deep red/near-infrared TADF emitters.

Carbonyl- and Nitrogen-Embedded Multi-Resonance Emitter with Ultra-Pure Green Emission and High Electroluminescence Efficiencies

Multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters with narrow emission spectra have garnered significant attention in future organic light-emitting diode (OLED) displays. However, current C=O/N-embedded MR-TADF systems still lack satisfactory performance in terms of electroluminescence bandwidths and external quantum efficiencies (EQEs). In this study, a C=O/N-embedded green MR-TADF emitter, featuring two acridone units incorporated in a sterically protected 11-ring fused core skeleton, is successfully synthesized through finely controlling the reaction selectivity. The superior combination of multiple intramolecular fusion and steric wrapping strategies in the design of the emitter not only imparts an extremely narrow emission spectrum and a high fluorescence quantum yield to the emitter but also mitigates aggregation-induced spectral broadening and fluorescence quenching. Therefore, the emitter exhibits leading green OLED performance among C=O/N-based MR-TADF systems, achieving an EQE of up to 37.2 %, a full width at half maximum of merely 0.11 eV (24 nm), and a Commission Internationale de l'Éclairage coordinate of (0.20, 0.73). This study marks a significant advance in the realization of ideal C=O/N-based MR-TADF emitters and holds profound implications for the design and synthesis of other MR-TADF systems.

Functional Alkali Metal-Based Ternary Chalcogenides: Design, Properties, and Opportunities

The search for novel materials has recently brought research attention to alkali metal-based chalcogenides (ABZ) as a new class of semiconducting inorganic materials. Various theoretical and computational studies have highlighted many compositions of this class as ideal functional materials for application in energy conversion and storage devices. This Perspective discusses the expansive compositional landscape of ABZ compositions that inherently gives a wide spectrum of properties with great potential for application. In the present paper, we examine the technique of synthesizing this particular class of materials and explore their potential for compositional engineering in order to manipulate key functional properties. This study presents the notable findings that have been documented thus far in addition to outlining the potential avenues for implementation and the associated challenges they present. By fulfilling the sustainability requirements of being relativity earth-abundant, environmentally benign, and biocompatible, we anticipate a promising future for alkali metal chalcogenides. Through this Perspective, we aim to inspire continued research on this emerging class of materials, thereby enabling forthcoming breakthroughs in the realms of photovoltaics, thermoelectrics, and energy storage.

Transition-Metal-Catalyzed Silylation and Borylation of C-H Bonds for the Synthesis and Functionalization of Complex Molecules

The functionalization of C-H bonds in organic molecules containing functional groups has been one of the holy grails of catalysis. One synthetically important approach to the diverse functionalization of C-H bonds is the catalytic silylation or borylation of C-H bonds, which enables a broad array of downstream transformations to afford diverse structures. Advances in both undirected and directed methods for the transition-metal-catalyzed silylation and borylation of C-H bonds have led to their rapid adoption in early-, mid-, and late-stage of the synthesis of complex molecules. In this Review, we review the application of the transition-metal-catalyzed silylation and borylation of C-H bonds to the synthesis of bioactive molecules, organic materials, and ligands. Overall, we aim to provide a picture of the state of art of the silylation and borylation of C-H bonds as applied to the synthesis and modification of diverse architectures that will spur further application and development of these reactions.

D-π-A array structure of Bi4Ti3O12-triazine-aldehyde group benzene skeleton for enhanced photocatalytic uranium (VI) reduction

Photocatalytic reduction of U^VI to U^IV can help remove U from the environment and thus reduce the harmful impacts of radiation emitted by uranium isotopes. Herein, we first synthesized Bi₄Ti₃O₁₂ (B1) particles, then B1 was crosslinked with 6-chloro-1,3,5-triazine-diamine (DCT) to afford B2. Finally, B3 was formed using B2 and 4-formylbenzaldehyde (BA-CHO) to investigate the utility of the D-π-A array structure for photocatalytic U^VI removal from rare earth tailings wastewater. B1 lacked adsorption sites and displayed a wide band gap. The grafted triazine moiety in B2 introduced active sites and narrowed the band gap. Notably, B3, a Bi₄Ti₃O₁₂ (donor)-triazine unit (π-electron bridge)-aldehyde benzene (acceptor) molecule, effectively formed the D-π-A array structure, which formed multiple polarization fields and further narrowed the band gap. Therefore, U^VI was more likely to capture electrons at the adsorption site of B3 and be reduced to U^IV due to energy level matching effects. U^VI removal capacity of B3 under simulated sunlight was 684.9 mg g^-1, 2.5 times greater than B1 and 1.8 times greater than B2. B3 was still active after multiple reaction cycles, and U^VI removal from tailings wastewater reached 90.8%. Overall, B3 provides an alternative design scheme for enhancing photocatalytic performance.

Design of Intramolecular Dihedral Angle between Electronic Donor and Acceptor in Thermally Activated Delayed Fluorescence Molecules

In order to improve the exciton utilization efficiency (η_exc) of organic light-emitting materials, we addressed the ideal donor-acceptor dihedral angle (θ_D-A) in the TADF molecule by striking a balance between two photophysical processes. One is the conversion of triplet excitons into singlet excitons, and the other is the radiative process from a low-lying excited state to the ground state. Using a combination of first-principles calculations and molecular dynamics simulations, we investigated the impact of θ_D-A on the splitting energy and spin-orbit coupling between singlet and triplet excitons as well as the transition dipole moment for carbazole benzonitrile (CzBN) derivatives. By comparison with the reverse intersystem crossing rate (k_rISC), fluorescence emission rate (k_r), and η_exc, we proposed a potential highest η_exc (of 94.4%) with the ideal θ_D-A of 77° for blue light CzBN derivatives; the calculated results have a good agreement with experimental measurement. The structure-efficiency physical connection between the molecular structure (θ_D-A) and efficiency provided an ideal parameter for a potential candidate for blue TADF-OLED materials.

Synthesis and Structure-Property Relationships in Regioisomeric Alternating Borane-Terthiophene Polymers

Main-chain boron-containing π-conjugated polymers are attractive for organic electronic, sensing, and imaging applications. Alternating terthiophene-borane polymers were prepared and the effects of regioisomeric attachment of the conjugated linker and variations in the electronic effect of the pendent aryl groups (2,4,6-tri-tert-butylphenyl, Mes*; 2,4,6-tris(trifluoromethyl)phenyl, FMes) examined. Pd₂ dba₃ /P(t-Bu)₃ -catalyzed Stille polymerization of arylbis(2-thienyl)borane and arylbis(3-thienylborane) with 2,5-bis(trimethylstannyl)thiophene at 120 °C gave polymers with appreciable molecular weight but MALDI-TOF MS analyses showed evidence of unusually prominent homocoupling. These defects could be suppressed by using brominated rather than iodinated monomers, more hindered 2,5-bis(tri-n-butylstannyl)thiophene as comonomer, and Pd₂ dba₃ /P(o-tol)₃ as the catalyst at 100 °C. Under these conditions, macrocyclic species with n=3-10 repeating units formed preferentially according to MALDI-TOF MS analyses. Photophysical studies revealed a prominent effect of the regiochemistry and the nature of the pendent aryl groups on the absorption and emission, giving rise to orange, yellow-green, blue-green, and blue emissive materials respectively. The electronic effects were rationalized through DFT calculations on bis(terthiophene) model systems.

Nonlinear optical properties and optimization strategies of D-π-A type phenylamine derivatives in the near-infrared region

Modifying simple molecular structures to significantly improve nonlinear optical (NLO) performance is a primary prerequisite for scientific research. Based on the four phenylamine derivatives reported in previous studies, we designed four organic nonlinear molecules by changing the acceptor group and π-linker. (Time-dependent) density functional theory (DFT/TD-DFT) was performed on molecular geometry optimization, the contribution of π electrons to the bond order, linear and two-photon absorption (TPA) spectra, the intra-molecular charge transfer matrix (CTM), and NLO coefficients. These aspects were considered to analyze in detail how the structural modification of acceptors and π-linkers affects NLO characteristics. The three modification methods were: adding a carbonyl group at the junction of the π-linker and the acceptor group, adding a carbonyl group and a nitrogen atom to the acceptor group, and replacing the quinolinone with a pyrenyl group as the π-linker. The latter two methods can significantly reduce the excitation energy and enhance the intensity of intra-molecular charge transfer during the two-photon transition. The maximum TPA cross-sections and wavelengths of the designed molecules are DPPM (84722.6 GM, 815.7 nm) and DDPM (21600.6 GM, 781.3 nm). These two molecules have large TPA cross-sections in the near-infrared region, which renders them as possible NLO materials with broad application prospects.

Donor-Acceptor Type of Fused-Ring Thermally Activated Delayed Fluorescence Compounds Constructed through an Oxygen-Containing Six-Membered Ring

Nowadays, thermally activated delayed fluorescence (TADF) compounds with a fused-ring core skeleton are getting increasing research interest because of their use in high-performance organic light-emitting diodes (OLEDs). In this study, TADF compounds featuring a D-A-type fused-ring core skeleton are developed. The challenging compatibility of a planarized D-A arrangement and the TADF property is achieved through linking the D and A moieties with two oxygen atoms within a six-membered ring. Compared with a single-oxygen analogue possessing a flexible skeleton and a twisted D-A arrangement, these fused-ring compounds with higher skeleton rigidity show higher photoluminescence quantum yields and narrower emission spectra in toluene and in doped thin films. Their electroluminescent devices achieve high external quantum efficiencies (up to 19.4%), suggesting the potential of rarely achieved D-A-type fused-ring TADF systems to serve as high-performance emitters of OLEDs.

Polymer dots and glassy organic dots using dibenzodipyridophenazine dyes as water-dispersible TADF probes for cellular imaging

Fluorescence imaging of living cells is key to better understanding cellular morphology and biological processes. Water-dispersible nanoparticles exhibiting thermally activated delayed fluorescence (TADF) have recently emerged as useful probes for time-resolved fluorescence imaging (TRFI), circumventing interference from biological autofluorescence. Many existing approaches, however, require TADF dyes with specific structural features, precluding many high-performance TADF materials from being used in this application. Here, we describe the synthesis of two TADF emitters based on the rigid and strongly electron-withdrawing dibenzo[a,c]dipyrido[3,2-h:2'-3'-j]phenazine-12-yl (BPPZ) motif, and demonstrate two parallel approaches for the encapsulation of these fluorophores to yield water-dispersible nanoparticles suitable for TRFI. First, fluorescent polymer dots (Pdots) were formed by dye encapsulation within cell-penetrating amphiphilic copolymers. Glassy organic nanoparticles (g-Odots) were also prepared, giving nanoparticles with higher photoluminescence quantum yields and improved colour purity. Both approaches yielded nanoparticles suitable for imaging, with reasonable uptake and cytotoxicity on the timescale of standard imaging experiments using human cervical (HeLa) and liver (HepG2) cancer cell lines. This work demonstrates two flexible strategies for preparing water-dispersible TADF nanoparticles for TRFI, both of which should be readily adaptable to nearly any existing hydrophobic TADF dye.

Determining the Energy Gap between the S1 and T1 States of Thermally Activated Delayed Fluorescence Molecular Systems Using Transient Fluorescence Spectroscopy

The energy gap (ΔE_S-T) between the lowest single and triple excited states is a crucial parameter for thermally activated delayed fluorescence (TADF) molecular systems with high quantum yield. However, a reliable experimental approach to precisely determine this value is challenging. Here, we introduce a new, simple, and efficient strategy to accurately obtain the ΔE_S-T in TADF systems from time-resolved fluorescence spectroscopy using a recently reported TADF molecule, DMACPDO, as a representative. By introducing an explicit model to describe the corresponding singlet-triplet coupling system, elusive intersystem crossing and reverse intersystem crossing rates can be extracted by fitting the kinetics of the observed fluorescence. The ΔE_S-T value can then be determined. Moreover, our modeling accurately explained the opposite trend in fluorescence intensity of DMACPDO with solvent polarity under air-saturated and deoxygenated conditions. Additionally, the validity of this approach has been demonstrated in another well-known TADF molecule, 4CzIPN. We demonstrate how this approach of determining ΔE_S-T sheds light on a deeper understanding of energy-loss mechanisms involved in related photoconversion processes.

Cavity-Suppressing Electrode Integrated with Multi-Quantum Well Emitter: A Universal Approach Toward High-Performance Blue TADF Top Emission OLED

A novel device structure for thermally activated delayed fluorescence (TADF) top emission organic light-emitting diodes (TEOLEDs) that improves the viewing angle characteristics and reduces the efficiency roll-off is presented. Furthermore, we describe the design and fabrication of a cavity-suppressing electrode (CSE), Ag (12 nm)/WO₃ (65 nm)/Ag (12 nm) that can be used as a transparent cathode. While the TADF-TEOLED fabricated using the CSE exhibits higher external quantum efficiency (EQE) and improved angular dependency than the device fabricated using the microcavity-based Ag electrode, it suffers from low color purity and severe efficiency roll-off. These drawbacks can be reduced by using an optimized multi-quantum well emissive layer (MQW EML). The CSE-based TADF-TEOLED with an MQW EML fabricated herein exhibits a high EQE (18.05%), high color purity (full width at half maximum ~ 59 nm), reduced efficiency roll-off (~ 46% at 1000 cd m^-2), and low angular dependence. These improvements can be attributed to the synergistic effect of the CSE and MQW EML. An optimized transparent CSE improves charge injection and light outcoupling with low angular dependence, and the MQW EML effectively confines charges and excitons, thereby improving the color purity and EQE significantly. The proposed approach facilitates the optimization of multiple output characteristics of TEOLEDs for future display applications.

Theoretically elucidating high photoluminescence performance of dimethylacridan-based blue-color thermally activated delayed fluorescent materials

Based on first-principles methods, we comprehensively quantify the luminous quantum efficiencies and related photophysical process rates of dimethylacridan-based blue-color TADF emitters.

Thermally activated delayed fluorescence materials with aggregation-induced emission properties: a QM/MM study

Organic molecules with thermally activated delayed fluorescence (TADF) and aggregation induced emission (AIE) properties have attracted increasing research interest due to their great potential applications in organic light emitting diodes (OLEDs), especially for those with multicolor mechanochromic luminescence (MCL) features. Theoretical research on the luminescence characteristics of organic TADF emitters based on the aggregation states is highly desired to quantify the relationship between the TADF properties and aggregation states. In this work, we study the 4,4'-(6-(9,9-dimethylacridine-10(9H)-yl)quinoline-2,3-dibenzonitrile (DMAC-CNQ) emitter with TADF and AIE properties, and calculate the photophysical properties in gas, solid and amorphous states by using the quantum mechanics and molecular mechanics (QM/MM) method. Our simulations demonstrate that the aggregation states enhance obviously the reverse intersystem crossing rates and transition dipole moments of the DMAC-CNQ emitter, and suppress the non-radiative rates from the lowest excited singlet state (S₁) to ground state (S₀). Specifically, the molecular stacking of DMAC-CNQ in solid phases can mainly restrict the geometric torsion of the DMAC moiety for decreasing non-radiative decay rates, and the torsion of the CNQ moiety for increasing the reverse intersystem crossing rates. As a result, the calculated fluorescence efficiencies of the DMAC-CNQ emitter in the crystal and amorphous states are 67% and 26% respectively, and in good agreement with the experimental results.

One- and two-electron reduction of triarylborane-based helical donor-acceptor compounds

One-electron chemical reduction of 10-(dimesitylboryl)-N,N-di-p-tolylbenzo[c]phenanthrene-4-amine (3-B(Mes)2-[4]helix-9-N(p-Tol)2) 1 and 13-(dimesitylboryl)-N,N-di-p-tolyldibenzo[c,g]phenanthrene-8-amine (3-B(Mes)2-[5]helix-12-N(p-Tol)2) 2 gives rise to monoanions with extensive delocalization over the annulated helicene rings and the boron p z orbital. Two-electron chemical reduction of 1 and 2 produces open-shell biradicaloid dianions with temperature-dependent population of the triplet states due to small singlet-triplet gaps. These results have been confirmed by single-crystal X-ray diffraction, EPR and UV/vis-NIR spectroscopy, and DFT calculations.

PCM-ROKS for the Description of Charge-Transfer States in Solution: Singlet-Triplet Gaps with Chemical Accuracy from Open-Shell Kohn-Sham Reaction-Field Calculations

The adiabatic energy gap between the lowest singlet and triplet excited states ΔE_ST is a central property of thermally activated delayed fluorescence (TADF) emitters. Since these states are dominated by a charge-transfer character, causing strong orbital-relaxation and environmental effects, an accurate prediction of ΔE_ST is very challenging, even with modern quantum-chemical excited-state methods. Addressing this major challenge, we present an approach that combines spin-unrestricted (UKS) and restricted open-shell Kohn-Sham (ROKS) self-consistent field calculations with a polarizable-continuum model and range-separated hybrid functionals. Tests on a new representative benchmark set of 27 TADF emitters with accurately known ΔE_ST values termed STGABS27 reveal a robust and unprecedented performance with a mean absolute deviation of only 0.025 eV (∼0.5 kcal/mol) and few deviations greater than 0.05 eV (∼1 kcal/mol), even in electronically challenging cases. Requiring only two geometry optimizations per molecule at the ROKS/UKS level in a compact double-ζ basis, the approach is computationally efficient and can routinely be applied to molecules with more than 100 atoms.

Highly Efficient Electroluminescence from Narrowband Green Circularly Polarized Multiple Resonance Thermally Activated Delayed Fluorescence Enantiomers

Purely organic fluorescent materials that concurrently exhibit high efficiency, narrowband emission, and circularly polarized luminescence (CPL) remain an unaddressed issue despite their promising applications in wide color gamut- and 3D-display. Herein, the CPL optical property and multiple resonance (MR) effect induced thermally activated delayed fluorescence (MR-TADF) emission are integrated with high color purity and luminous efficiency together. Two pairs of highly efficient green CP-MR-TADF enantiomers, namely, (R/S)-OBN-2CN-BN and (R/S)-OBN-4CN-BN, are developed. The enantiomer-based organic light-emitting diodes (OLEDs) exhibit pure green emission with narrow full-width at half-maximums (FWHMs) of 30 and 33 nm, high maximum external quantum efficiencies (EQEs) of 29.4% and 24.5%, and clear circularly polarized electroluminescence (CPEL) signals with electroluminescence dissymmetry factors (g_EL ) of +1.43 × 10^-3 /-1.27 × 10^-3 and +4.60 × 10^-4 /-4.76 × 10^-4 , respectively. This is the first example of a highly efficient OLED that exhibits CPEL signal, narrowband emission, and TADF concurrently.

A TADF Emitter Featuring Linearly Arranged Spiro-Donor and Spiro-Acceptor Groups: Efficient Nondoped and Doped Deep-Blue OLEDs with CIEy <0.1

Reported herein is a molecular design strategy of deep-blue emitters for resolving the lack of highly efficient deep-blue organic light-emitting diodes (OLEDs) featuring CIE_y (Commission Internationale de l'Eclairage) color coordinates matching the display requirements (<0.1). The strategy is to combine weak spiro-donor and spiro-acceptor groups into a linear donor-π-acceptor type of thermally-activated delayed fluorescence molecule through a sterically bulky π-spacer. The strategy endows an emitter with deep-blue emission, a narrower emission bandwidth (51 nm in toluene), a high photoluminescence quantum yield (0.95 in toluene), weak concentration quenching, and efficient triplet-exciton utilization, which are all attractive characteristics for emitters of deep-blue OLEDs with lower CIE_y coordinates. Owing to the rational design, the emitter has realized not only highly efficient doped deep-blue OLEDs with external quantum efficiencies (EQEs) up to 25.4 % and CIE_y less than 0.1 but also so far the most efficient nondoped deep-blue OLED (EQE up to 22.5 %) with CIE_y less than 0.1.

Phenylpyridyl-Fused Boroles: A Unique Coordination Mode and Weak B-N Coordination-Induced Dual Fluorescence

Using 4-phenylpyridine or 2-phenylpyridine in place of biphenyl, two electron-poor phenylpyridyl-fused boroles, [TipPBB1]4 and TipPBB2 were prepared. [TipPBB1]4 adopts a unique coordination mode and forms a tetramer with a cavity in both the solid state and solution. The boron center of TipPBB2 is 4-coordinate in the solid state but the system dissociates in solution, leading to 3-coordinate borole species. Compared to its borafluorene analogues, the electron-accepting ability of TipPBB2 is largely enhanced by the pyridyl group. TipPBB2 exhibits dual fluorescence in solution due to an equilibrium between free TipPBB2 and a weak intermolecular coordination adduct with a second molecule. This equilibrium was further investigated by low-temperature NMR spectroscopy and photophysical studies. Theoretical studies indicate that the highest occupied molecular orbital (HOMO) of TipPBB2 localizes at the Tip group, in contrast to its borafluorene derivatives, wherein the HOMOs are localized on the borafluorene cores.

(Hetero)arene-fused boroles: a broad spectrum of applications

(Hetero)arene-fused boroles are a class of compounds containing a 5-membered boron diene-ring. Based on their molecular framework, the (hetero)arene-fused boroles can be considered as boron-doped polycyclic antiaromatic hydrocarbons and are thus of great interest. Due to the vacant p_z orbital on the 3-coordinate boron atom, the antiaromaticity and strain of the 5-membered borole ring, (hetero)arene-fused boroles possess strong electron accepting abilities and Lewis acidity. By functionalization, they can be tuned to optimize different properties for specific applications. Herein, we summarize synthetic methodologies, different strategies for their functionalization, and applications of (hetero)arene-fused boroles.

(Hetero)arene-fused boroles, ‘antiaromatic’ 2n-electron π-systems, more stable and more functionalizable than boroles, offer greater potential for a variety of applications.

An Iterative Divergent Approach to Conjugated Starburst Borane Dendrimers

Using a new divergent approach, conjugated triarylborane dendrimers were synthesized up to the 2nd generation. The synthetic strategy consists of three steps: 1) functionalization, via iridium catalyzed C-H borylation; 2) activation, via fluorination of the generated boronate ester with K[HF2 ] or [N(nBu4 )][HF2 ]; and 3) expansion, via reaction of the trifluoroborate salts with aryl Grignard reagents. The concept was also shown to be viable for a convergent approach. All but one of the conjugated borane dendrimers exhibit multiple, distinct and reversible reduction potentials, making them potentially interesting materials for applications in molecular accumulators. Based on their photophysical properties, the 1st generation dendrimers exhibit good conjugation over the whole system. However, the conjugation does not increase further upon expansion to the 2nd generation, but the molar extinction coefficients increase linearly with the number of triarylborane subunits, suggesting a potential application as photonic antennas.

Electronically Driven Regioselective Iridium-Catalyzed C-H Borylation of Donor-π-Acceptor Chromophores Containing Triarylboron Acceptors

We observed a surprisingly high electronically driven regioselectivity for the iridium-catalyzed C-H borylation of donor-π-acceptor (D-π-A) systems with diphenylamino (1) or carbazolyl (2) moieties as the donor, bis(2,6-bis(trifluoromethyl)phenyl)boryl (B(F Xyl)2 ) as the acceptor, and 1,4-phenylene as the π-bridge. Under our conditions, borylation was observed only at the sterically least encumbered para-positions of the acceptor group. As boronate esters are versatile building blocks for organic synthesis (C-C coupling, functional group transformations) the C-H borylation represents a simple potential method for post-functionalization by which electronic or other properties of D-π-A systems can be fine-tuned for specific applications. The photophysical and electrochemical properties of the borylated (1-(Bpin)2 ) and unborylated (1) diphenylamino-substituted D-π-A systems were investigated. Interestingly, the borylated derivative exhibits coordination of THF to the boronate ester moieties, influencing the photophysical properties and exemplifying the non-innocence of boronate esters.