Flexible antibacterial film deposited with polythiophene-porphyrin composite

Visible Light-Driven D-A Conjugated Linear Polymer and Its Coating for Dual Highly Efficient Photocatalytic Degradation and Disinfection

Herein, a novel donor-acceptor (D-A) conjugated linear polymeric system, poly[(2,6-(4,8-bis(5-(2-ethylhexyl)-4-fluorothiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-2,5-(3-carboxyl)-thiophene] (PBDT-F-COOH), with outstanding processing ability and its all-organic PBDT-F-COOH coating featuring chemical bonding for combination with polyurethane were prepared. Wide visible spectrum-driven PBDT-F-COOH and PBDT-F-COOH-PU showed dual efficient photocatalytic activities toward degradation and disinfection, mainly attributing to efficient dissociation of excitons and transfer of charge carriers, resulting from the large dipole moment of D-A PBDT-F-COOH. PBDT-F-COOH demonstrated >99.2% inactivation of Staphylococcus aureus (S. aureus) within 1 h and a 7-log decrease in 4 h under visible light irradiation. Additionally, the coating showed the 7-log inactivation of S. aureus in 7 h. These inactivation efficiency results are among those of the best reported D-A conjugated linear polymers. Importantly, PBDT-F-COOH and the PBDT-F-COOH-PU coating both presented satisfactory stability with high photocatalytic activity after recycling runs. This work provides a feasible approach for fabricating nontoxic and highly active organic photocatalysts with wide visible spectra and a large dipole moment via a D-A linear structure design protocol.

Bactericidal efficiency of porphyrin systems

Photodynamic Inactivation is an innovative technique used to combat bacterial and viral infections which involves the use of photosensitizing agents along with light to generate cytotoxic reactive oxygen species able to kill bacteria and viruses. In the first section of this minireview, porphyrin-based fluorophores are shown to be remarkable dye candidates for PDI (photodynamic inactivation) applications. The second section is dedicated to the description of porphyrin-based antimicrobial materials and their potentialities for industrial applications such as in food packaging or antimicrobial medical devices and hygiene. Finally, the failings and perspectives of PDI are analyzed to demonstrate how the PDI technique could be an efficient and ecologically friendly antimicrobial technique.

Antimicrobial Photodynamic Polymeric Films Bearing Biscarbazol Triphenylamine End-Capped Dendrimeric Zn(II) Porphyrin

A novel biscarbazol triphenylamine end-capped dendrimeric zinc(II) porphyrin (DP 5) was synthesized by click chemistry. This compound is a cruciform dendrimer that bears a nucleus of zinc(II) tetrapyrrolic macrocycle substituted at the meso positions by four identical substituents. These are formed by a tetrafluorophenyl group that possesses a triazole unit in the para position. This nitrogenous heterocyclic is connected to a 4,4'-di(N-carbazolyl)triphenylamine group by means of a phenylenevinylene bridge, which allows the conjugation between the nucleus and this external electropolymerizable carbazoyl group. In this structure, dendrimeric arms act as light-harvesting antennas, increasing the absorption of blue light, and as electroactive moieties. The electrochemical oxidation of the carbazole groups contained in the terminal arms of the DP 5 was used to obtain novel, stable, and reproducible fully π-conjugated photoactive polymeric films (FDP 5). First, the spectroscopic characteristics and photodynamic properties of DP 5 were compared with its constitutional components derived of porphyrin P 6 and carbazole D 7 moieties in solution. The fluorescence emissions of the dendrimeric units in DP 5 were more strongly quenched by the tetrapyrrolic macrocycle, indicating photoinduced energy transfer. In addition, FDP 5 film showed the Soret and Q absorption bands and red fluorescence emission of the corresponding zinc(II) porphyrin. Also, FDP 5 film was highly stable to photobleaching, and it was able to produce singlet molecular oxygen in both N,N-dimethylformamide (DMF) and water. Therefore, the porphyrin units embedded in the polymeric matrix of FDP 5 film mainly retain the photochemical properties. Photodynamic inactivation mediated by FDP 5 film was investigated in Staphylococcus aureus and Escherichia coli. When a cell suspension was deposited on the surface, complete eradication of S. aureus and a 99% reduction in E. coli survival were found after 15 and 30 min of irradiation, respectively. Also, FDP 5 film was highly effective to eliminate individual bacteria attached to the surface. In addition, photodynamic inactivation (PDI) sensitized by FDP 5 film produced >99.99% bacterial killing in biofilms formed on the surface after 60 min irradiation. The results indicate that FDP 5 film represents an interesting and versatile photodynamic active material to eradicate bacteria as planktonic cells, individual attached microbes, or biofilms.

Polyhedral Oligomeric Silsesquioxane (POSS)-Based Cationic Conjugated Oligoelectrolyte/Porphyrin for Efficient Energy Transfer and Multiamplified Antimicrobial Activity

Cationic quaternary ammonium (QA) groups and reactive oxygen species as two main approaches for antibacterial study have been intensively studied. Herein, we report a multifunctional antimicrobial agent (porphyrin-POSS-OPVE, PPO), which combines bacterial membrane intercalation, high density of local QA groups, efficient energy transfer, significantly reduced aggregation, and high water solubility into one single molecule. The light-harvesting PPO contains multiple donor-absorbing arms (oligo( p-phenylenevinylene) electrolytes, OPVEs) on its globular periphery and a central porphyrin acceptor in the core by using three-dimensional nanocages (polyhedral oligomeric silsesquioxanes, POSSs) as bridges. The antiaggregation ability of POSS and the highly efficient energy transfer from multiple OPVE arms to porphyrin could greatly amplify singlet oxygen generation in PPO. Particularly, OPVEs with QA terminal chains were able to intercalate into Escherichia coli membranes, which facilitated ¹O₂ diffusion and bacterial cell membrane disintegration by QA groups. The increased local cationic QA charges in OPVE arms can also enhance the biocidal activity of PPO. Benefiting from these satisfactory features, PPO exhibits multiamplified antibacterial efficacy under a very low concentration level and white light dose (400-700 nm, 6 mW·cm^-2, 5 min, 1.8 J·cm^-2) to Escherichia coli (8 μM) and Staphylococcus aureus (500 nM). Therefore, PPO shows great potential for photodynamic antimicrobial chemotherapy at a much lower irradiation light dose and photosensitizer concentration level compared to previous reports.

Flexible Antibacterial Film Based on Conjugated Polyelectrolyte/Silver Nanocomposites

In this work, we report a flexible film based on conjugated polyelectrolyte/silver nanocomposites with efficient antibacterial activity. A flexible poly(dimethylsiloxane) film served as a substrate for deposition of nanostructured silver. A light-activated antibacterial agent, based on the cationic conjugated polyelectrolyte poly({9,9-bis[6'-(N,N-trimethylamino)hexyl]-2,7-fluorenyleneethynylene}-alt-co-1,4-(2,5-dimethoxy)phenylene)dibromide (PFEMO) was self-assembled on the negatively charged substrate. By changing the thickness of the poly(l-lysine)/poly(acrylic acid) multilayers between the metal substrate and PFEMO, we obtained concomitant enhancement of PFEMO fluorescence, phosphorescence, and reactive oxygen species generation. These enhancements were induced by surface plasmon resonance effects of the Ag nanoparticles, which overlapped the PFEMO absorption band. Owing to the combination of enhanced bactericidal effects and good flexibility, these films have great potential for use as novel biomaterials for preventing bacterial infections.

Assessing the Biocidal Activity and Investigating the Mechanism of Oligo-p-phenylene-ethynylenes

A number of oligo-p-phenylene-ethynylenes (OPEs) have exhibited excellent biocidal activity against both Gram-negative and Gram-positive bacteria. Although cell death may occur in the dark, these biocidal compounds are far more effective in the light as a result of their abilities to generate cell-damaging reactive oxygen species. In this study, the interactions of four OPEs with Escherichia coli and Staphylococcus aureus have been investigated. Compared to the OPEs with quaternary ammonium salts (Q-OPE), the OPEs with tertiary ammonium (T-OPE) effectively kill many more bacterial cells under light irradiation, presumably by severe perturbations of the bacterial cell wall and cytoplasmic membrane. According to the findings from this study, such intriguing light-induced antibacterial behavior is probably attributed to the combination of bacterial membrane disruption and the interfacial or intracellular generation of singlet oxygen or other ROS. Singlet oxygen was proved to be formed from irradiation of the OPEs, whereas the varying cell membrane perturbation abilities of OPEs enhance antibacterial activity.

Antimicrobial Polymers in the Nano-World

Infections are one of the main concerns of our era due to antibiotic-resistant infections and the increasing costs in the health-care sector. Within this context, antimicrobial polymers present a great alternative to combat these problems since their mechanisms of action differ from those of antibiotics. Therefore, the microorganisms' resistance to these polymeric materials is avoided. Antimicrobial polymers are not only applied in the health-care sector, they are also used in many other areas. This review presents different strategies that combine nanoscience and nanotechnology in the polymer world to combat contaminations from bacteria, fungi or algae. It focuses on the most relevant areas of application of these materials, viz. health, food, agriculture, and textiles.

A Perspective on the Trends and Challenges Facing Porphyrin-Based Anti-Microbial Materials

The emergence of multidrug resistant bacterium threatens to unravel global healthcare systems, built up over centuries of medical research and development. Current antibiotics have little resistance against this onslaught as bacterium strains can quickly evolve effective defense mechanisms. Fortunately, alternative therapies exist and, at the forefront of research lays the photodynamic inhibition approach mediated by porphyrin based photosensitizers. This review will focus on the development of various porphyrins compounds and their incorporation as small molecules, into polymers, fibers and thin films as practical therapeutic agents, utilizing photodynamic therapy to inhibit a wide spectrum of bacterium. The use of photodynamic therapy of these porphyrin molecules are discussed and evaluated according to their electronic and bulk material effect on different bacterium strains. This review also provides an insight into the general direction and challenges facing porphyrins and derivatives as full-fledged therapeutic agents and what needs to be further done in order to be bestowed their rightful and equal status in modern medicine, similar to the very first antibiotic; penicillin itself. It is hoped that, with this perspective, new paradigms and strategies in the application of porphyrins and derivatives will progressively flourish and lead to advances against disease.

Cationic Oligo(thiophene ethynylene) with Broad-Spectrum and High Antibacterial Efficiency under White Light and Specific Biocidal Activity against S. aureus in Dark

We designed and synthesized a novel oligo(thiophene ethynylene) (OTE) to investigate the antibacterial activities against Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative (Ralstonia solanacearum and Escherichia coli) bacteria in vitro by photodynamic therapy (PDT). Notably, OTE presents broad-spectrum and greatly high antibacterial activities after white light irradiation at nanogram per milliliter concentrations. The half inhibitory concentrations (IC50) values obtained for S. aureus, S. epidermidis, E. coli, and R. solanacearum are 8, 13, 24, and 52 ng/mL after illumination for 30 min, respectively, which are lower than that of other PDT agents. Interestingly, OTE shows the specific and very strong dark killing capability against S. aureus at the concentration of 180 ng/mL for 30 min, which is the highest efficiency biocide against S. aureus without the need of irradiation to date. The antibacterial mechanism investigated demonstrated that reactive oxygen species or singlet-oxygen generated by OTE kills bacteria irreversibly upon white light irradiation, and OTE as a v-type oligomer exerts its toxicity directly on destroying bacterial cytoplasmic membrane in the dark. Importantly, the OTE shows no cell cytotoxicity and excellent biocompatibility. The results indicate that it is potential to provide versatile applications in the efficient control of pathogenic organisms and specific application for killing S. aureus.

An adaptive biointerface from self-assembled functional peptides for tissue engineering

A self-assembled peptide-based biointerface is demonstrated with triple functional layers that can significantly improve the tissue self-healing process or prevent biofilm-mediated chronic inflammation. This smart biointerface is composed of three functional moieties (i.e., a cell-adhesive peptide, an infectious environment-responsive peptide, and an antifouling hexaethylene glycol (HEG) layer), and the resulting interface coated onto prosthetic replacements can smartly respond to the surrounding physiological or pathological microenvironment.

Synthesis of ultrastable copper sulfide nanoclusters via trapping the reaction intermediate: potential anticancer and antibacterial applications

Copper-based nanomaterials have broad applications in electronics, catalysts, solar energy conversion, antibiotics, tissue imaging, and photothermal cancer therapy. However, it is challenging to prepare ultrasmall and ultrastable CuS nanoclusters (NCs) at room temperature. In this article, a simple method to synthesize water-soluble, monodispersed CuS NCs is reported based on the strategy of trapping the reaction intermediate using thiol-terminated, alkyl-containing short-chain poly(ethylene glycol)s (HS-(CH2)11-(OCH2CH2)6-OH, abbreviated as MUH). The MUH-coated CuS NCs have superior stability in solutions with varied pH values and are stable in pure water for at least 10 months. The as-prepared CuS NCs were highly toxic to A549 cancer cells at a concentration of higher than 100 μM (9.6 μg/mL), making them be potentially applicable as anticancer drugs via intravenous administration by liposomal encapsulation or by direct intratumoral injection. Besides, for the first time, CuS NCs were used for antibacterial application, and 800 μM (76.8 μg/mL) CuS NCs could completely kill the E. coli cells through damaging the cell walls. Moreover, the NCs synthesized here have strong near-infrared (NIR) absorption and can be used as a candidate reagent for photothermal therapy and photoacoustic imaging. The method of trapping the reaction intermediate for simple and controlled synthesis of nanoclusters is generally applicable and can be widely used to synthesize many metal-based (such as Pt, Pd, Au, and Ag) nanoclusters and nanocrystals.

Conjugated-polymer-based energy-transfer systems for antimicrobial and anticancer applications

Conjugated polymers (CPs) attract a lot of attention in sensing, imaging, and biomedical applications because of recent achievements that are highlighted in this Research News article. A brief review of recent progress in the application of CP-based energy-transfer systems in antimicrobial and anticancer treatments is provided. The transfer of excitation energy from CPs to photosensitizers leads to the generation of reactive oxygen species (ROS) that are able to efficiently kill pathogenic microorganisms and cancer cells in the surroundings. Both fluorescence resonance energy transfer (FRET) and bioluminescence energy transfer (BRET) modes are discussed.