Supported Lipid Bilayers for the Generation of Dynamic Cell-Material Interfaces

Characterization of a Charged Biomimetic Lipid Membrane for Unique Antifouling Effects against Clinically Relevant Matrices in Biosensing

Clinically relevant matrices such as human blood and serum can cause substantial interference in biosensing measurements, severely compromising the effectiveness of the sensors. We report the characterization of a positively charged lipid membrane that has demonstrated unique features to suppress the nonspecific signal for antifouling effects by using SPR, fluorescence recovery after photobleaching (FRAP), and MALDI-TOF-MS. The ethylphosphocholine (EPC) lipid membrane proved to be exceptionally effective at reducing irreversible interactions from human serum on a Protein A surface. The membrane formation conditions and their effects on membrane fluidity and mobility were characterized for understanding the antifouling functions when various capture molecules were immobilized. Specifically, EPC lipid membranes on a Protein A substrate appear to exhibit a strong interaction, likely through the electrostatic effect with the negatively charged proteins that resulted in a stable hydration layer. The strong interaction also limited lipid mobility, contributing to a robust, protective interface that remained undamaged in undiluted serum. Tailoring a surface with antifouling lipid membranes allows for a range of biosensing applications in highly complex biological media.

Cell Membrane-Coated Nanoparticles for Dental, Oral, and Craniofacial Diseases

Dental, oral, and craniofacial diseases can substantially impact the quality of human life, thereby posing a serious public health concern. Although conventional therapies such as surgery have solved these problems largely, the prognosis of patients is not always satisfactory. Cell membrane-coated nanoparticles (CMCNPs) carry nanodrugs with the help of natural cell membranes, therefore utilizing their remarkable ability to interface and interact with their surrounding environment. These nanoparticles have demonstrated substantial advantages in drug targeting, prolonging blood circulation time, penetrating biofilms, and immune escape. With the assistance of CMCNPs, the therapeutic effects of dental, oral, and craniofacial diseases can reach a higher level. CMCNPs have been applied for dental, oral, and craniofacial diseases for various conditions such as head and neck cancer, periodontal disease, and oral biosignal detection. For the therapies of head and neck cancer, CMCNPs have been widely utilized as a tool of chemotherapy, phototherapy, and immunotherapy, while yet to be exploited in imaging technique. In the end, we summarized the challenges and prospectives of CMCNPs for dental, oral, and craniofacial diseases: large-scale production with uniform standards and high quantity, extensive application directions in dental, oral, and craniofacial regions (implant, endodontics), and the promotion of its clinical application.

Recent advances in biomimetic cell membrane-camouflaged nanoparticles for cancer therapy

The emerging strategy of biomimetic nanoparticles (NPs) via cellular membrane camouflage holds great promise in cancer therapy. This scholarly review explores the utilization of cellular membranes derived from diverse cellular entities; blood cells, immune cells, cancer cells, stem cells, and bacterial cells as examples of NP coatings. The camouflaging strategy endows NPs with nuanced tumor-targeting abilities such as self-recognition, homotypic targeting, and long-lasting circulation, thus also improving tumor therapy efficacy overall. The comprehensive examination encompasses a variety of cell membrane camouflaged NPs (CMCNPs), elucidating their underlying targeted therapy mechanisms and delineating diverse strategies for anti-cancer applications. Furthermore, the review systematically presents the synthesis of source materials and methodologies employed in order to construct and characterize these CMCNPs, with a specific emphasis on their use in cancer treatment.

Hierarchical Fluid Interface Enables Spatiotemporal Regulation of Ligand Distribution to Increase Kinetics and Thermodynamics of Interfacial Binding Reaction

In nature, regulation of the spatiotemporal distribution of interfacial receptors and ligands leads to optimum binding kinetics and thermodynamics of receptor-ligand binding reactions within interfaces. Inspired by this, we report a hierarchical fluid interface (HieFluidFace) to regulate the spatiotemporal distribution of interfacial ligands to increase the rate and thermodynamic favorability of interfacial binding reactions. Each aptamer-functionalized gold nanoparticle, termed spherical aptamer (SAPT), is anchored on a supported lipid bilayer without fluidity, like an "island", and is surrounded by many fluorescent aptamers (FAPTs) with free fluidity, like "rafts". Such ligand "island-rafts" model provides a large reactive cross-section for rapid binding to cellular receptors. The synergistic multivalency of SAPTs and FAPTs improves interfacial affinity for tight capture. Moreover, FAPTs accumulate at binding sites to bind to cellular receptors with clustered fluorescence to "lighten" cells for direct identification. Thus, HieFluidFace in a microfluidic chip achieves high-performance capture and identification of circulating tumor cells from clinical samples, providing a new paradigm to optimize the kinetics and thermodynamics of interfacial binding reactions.

NTA-Cholesterol Analogue for the Nongenetic Liquid-Ordered Phase-Specific Functionalization of Lipid Membranes with Proteins

The nongenetic modification of cell membranes with proteins is a straightforward way of cellular engineering. In these processes, it is important to specifically address the proteins to liquid-ordered (Lo) or liquid-disordered (Ld) domains as this can largely affect their biological functions. Herein, we report a cholesterol analogue (CHIM) with a nitrilotriacetic acid (NTA) headgroup, named CHIM-NTA. CHIM-NTA integrates into lipid membranes similar to the widely used phospholipid-derived DGS-NTA and, when loaded with Ni2+, allows for specific membrane immobilization of any polyhistidine-tagged proteins of choice. Yet, unlike DGS-NTA, it localizes to the Lo phase in phase-separated giant unilamellar vesicles (GUVs) and allows addressing His-tagged proteins to Lo domains. Furthermore, CHIM-NTA readily integrates into the membranes of live cells and thus enables the nongenetic modification of the cell surface with proteins. Overall, CHIM-NTA provides a facile and flexible way to modify biological membranes, in particular Lo domains, with His-tagged proteins and can serve as a broadly applicable molecular tool for cell surface engineering.

Accurate Capture and Identification of Exosomes: Nanoarchitecture of the MXene Heterostructure/Engineered Lipid Layer

Recently, exosome detection has become an important breakthrough in clinical diagnosis. However, the effective capture and accurate identification of cancer exosomes in a complex biomatrix are still a tough task. Especially, the large size and non-conductivity of exosomes are not conducive to highly sensitive electrochemical or electrochemiluminescence (ECL) detection. Therefore, we have developed a Ti₃C₂T_x-Bi₂S_3-x heterostructure/engineered lipid layer-based nanoarchitecture to overcome the limitations. The engineered lipid layer not only specifically captured and efficiently fused CD63 positive exosomes but also showed excellent antifouling property in the biological matrix. Moreover, the MUC1 aptamer-modified Ti₃C₂T_x-Bi₂S_3-x heterostructure further identified and covered the gastric cancer exosomes that have been trapped in the engineered lipid layer. In the self-luminous Faraday cage-type sensing system, the Ti₃C₂T_x-Bi₂S_3-x heterostructure with sulfur vacancies extended the outer Helmholtz plane and amplified the ECL signal. Therefore, this sensor can be used to detect tumor exosomes in ascites of cancer patients without additional purification. It provides a new pathway to detect exosomes and other large-sized vesicles with high sensitivity.

MoS2 QDs-MXene heterostructure-based ECL sensor for the detection of miRNA-135b in gastric cancer exosomes

Exosomes play an important role in the proliferation, adhesion and migration of cancer cells. In this study, we have developed a novel electrochemiluminescence (ECL) sensor based on MoS₂ QDs-MXene heterostructure and Au NPs@biomimetic lipid layer to detect exosomal miRNA. MoS₂ QDs-MXene heterostructure had been prepared as the luminescence probe. Ti₃C₂T_x MXene nanosheets possessed the large specific surface area, excellent flexibility and superior conductivity. MoS₂ QDs on the MXene nanosheets worked as the radiation center to generate strong ECL signal. Meanwhile, Au NPs with biomimetic lipid layer have been modified on the electrode, which retained the lipid dynamics and excellent antifouling property. When miRNA-135b was recognized on the Au NPs@biomimetic lipid layer, MoS₂ QDs-MXene heterostructure was linked on the electrode and further extended the outer Helmholtz plane. As a result, the self-luminous Faraday cage-mode sensing system has been used to detect miRNA-135b from 30 fM to 20 nM with a detection limit of 10 fM. Furthermore, gastric cancer exosomal miRNA in the ascites of clinical patients has been detected successfully. The sensing system can be served as a versatile platform with huge application potential in the field of exosome detection.

Hybrid bilayer membranes as platforms for biomimicry and catalysis

Hybrid bilayer membrane (HBM) platforms represent an emerging nanoscale bio-inspired interface that has broad implications in energy catalysis and smart molecular devices. An HBM contains multiple modular components that include an underlying inorganic surface with a biological layer appended on top. The inorganic interface serves as a support with robust mechanical properties that can also be decorated with functional moieties, sensing units and catalytic active sites. The biological layer contains lipids and membrane-bound entities that facilitate or alter the activity and selectivity of the embedded functional motifs. With their structural complexity and functional flexibility, HBMs have been demonstrated to enhance catalytic turnover frequency and regulate product selectivity of the O₂ and CO₂ reduction reactions, which have applications in fuel cells and electrolysers. HBMs can also steer the mechanistic pathways of proton-coupled electron transfer (PCET) reactions of quinones and metal complexes by tuning electron and proton delivery rates. Beyond energy catalysis, HBMs have been equipped with enzyme mimics and membrane-bound redox agents to recapitulate natural energy transport chains. With channels and carriers incorporated, HBM sensors can quantify transmembrane events. This Review serves to summarize the major accomplishments achieved using HBMs in the past decade.

Reversible Self-Assembled Monolayers with Tunable Surface Dynamics for Controlling Cell Adhesion Behavior

Cells adhering onto surfaces sense and respond to chemical and physical surface features. The control over cell adhesion behavior influences cell migration, proliferation, and differentiation, which are important considerations in biomaterial design for cell culture, tissue engineering, and regenerative medicine. Here, we report on a supramolecular-based approach to prepare reversible self-assembled monolayers (rSAMs) with tunable lateral mobility and dynamic control over surface composition to regulate cell adhesion behavior. These layers were prepared by incubating oxoacid-terminated thiol SAMs on gold in a pH 8 HEPES buffer solution containing different mole fractions of ω-(ethylene glycol)2-4- and ω-(GRGDS)-, α-benzamidino bolaamphiphiles. Cell shape and morphology were influenced by the strength of the interactions between the amidine-functionalized amphiphiles and the oxoacid of the underlying SAMs. Dynamic control over surface composition, achieved by the addition of inert filler amphiphiles to the RGD-functionalized rSAMs, reversed the cell adhesion process. In summary, rSAMs featuring mobile bioactive ligands offer unique capabilities to influence and control cell adhesion behavior, suggesting a broad use in biomaterial design, tissue engineering, and regenerative medicine.

Endothelial cell spreading on lipid bilayers with combined integrin and cadherin binding ligands

Endothelial cells play a central role in the vascular system, where their function is tightly regulated by both cell-extracellular matrix (e.g., via integrins) and cell-cell interactions (e.g., via cadherins). In this study, we incorporated cholesterol-modified integrin and N-cadherin peptide binding ligands in fluid supported lipid bilayers. Human umbilical vein endothelial cell adhesion, spreading and vinculin localization in these cells were dependent on ligand density. One composition led to observe a higher extent of cell spreading, where cells exhibited extensive lamellipodia formation and a qualitatively more distinct N-cadherin localization at the cell periphery, which is indicative of N-cadherin clustering and a mimic of cell-cell contact formation. The results can be used to reconstitute the endothelial-pericyte interface on biomedical devices and materials.

Quartz crystal microbalance and atomic force microscopy to characterize mimetic systems based on supported lipids bilayer

Quartz Crystal Microbalance (QCM) with dissipation and Atomic Force Microscopy (AFM) are two characterization techniques that allow describing processes taking place at solid-liquid interfaces. Both are label-free and, when used in combination, provide kinetic, thermodynamic and structural information at the nanometer scale of events taking place at surfaces. Here we describe the basic operation principles of both techniques, addressing a non-specialized audience, and provide some examples of their use for describing biological events taking place at supported lipid bilayers (SLBs). The aim is to illustrate current strengths and limitations of the techniques and to show their potential as biophysical characterization techniques.

Advancements in cell membrane camouflaged nanoparticles: A bioinspired platform for cancer therapy

The idea of employing natural cell membranes as a coating medium for nanoparticles (NPs) endows man-made vectors with natural capabilities and benefits. In addition to retaining the physicochemical characteristics of the NPs, the biomimetic NPs also have the functionality of source cell membranes. It has emerged as a promising approach to enhancing the properties of NPs for drug delivery, immune evasion, imaging, cancer-targeting, and phototherapy sensitivity. Several studies have been reported with a multitude of approaches to reengineering the surface of NPs using biological membranes. Owing to their low immunogenicity and intriguing biomimetic properties, cell-membrane-based biohybrid delivery systems have recently gained a lot of interest as therapeutic delivery systems. This review summarises different kinds of biomimetic NPs reported so far, their fabrication aspects, and their application in the biomedical field. Finally, it briefs on the latest advances available in this biohybrid concept.

Supramolecular Biomaterials in the Netherlands

Synthetically designed biomaterials strive to recapitulate and mimic the complex environment of natural systems. Using natural materials as a guide, the ability to create high performance biomaterials that control cell fate, and support the next generation of cell and tissue-based therapeutics, is starting to emerge. Supramolecular chemistry takes inspiration from the wealth of non-covalent interactions found in natural materials that are inherently complex, and using the skills of synthetic and polymer chemistry, recreates simple systems to imitate their features. Within the past decade, supramolecular biomaterials have shown utility in tissue engineering and the progress predicts a bright future. On this 30th anniversary of the Netherlands Biomaterials and Tissue Engineering society, we will briefly recount the state of supramolecular biomaterials in the Dutch academic and industrial research and development context. This review will provide the background, recent advances, industrial successes and challenges, as well as future directions of the field, as we see it. Throughout this work, we notice the intricate interplay between simplicity and complexity in creating more advanced solutions. We hope that the interplay and juxtaposition between these two forces can propel the field forward.

Multivalent Noncovalent Interfacing and Cross-Linking of Supramolecular Tubes

Natural supramolecular filaments have the ability to cross-link with each other and to interface with the cellular membrane via biomolecular noncovalent interactions. This behavior allows them to form complex networks within as well as outside the cell, i.e., the cytoskeleton and the extracellular matrix, respectively. The potential of artificial supramolecular polymers to interact through specific noncovalent interactions has so far only seen limited exploration due to the dynamic nature of supramolecular interactions. Here, a system of synthetic supramolecular tubes that cross-link forming supramolecular networks, and at the same time bind to biomimetic surfaces by the aid of noncovalent streptavidin-biotin linkages, is demonstrated. The architecture of the networks can be engineered by controlling the density of the biotin moiety at the exterior of the tubes as well as by the concentration of the streptavidin. The presented strategy provides a pathway for designing adjustable artificial supramolecular superstructures, which can potentially yield more complex biomimetic adaptive materials.

Negatively-charged supported lipid bilayers regulate neuronal adhesion and outgrowth

Primary cortical neurons were cultured on negatively charged supported lipid bilayers (SLBs). Such membranes demonstrated the potential effect of negative charges on neuronal growth and neurite branching and elongation.

Direct-Write Patterning of Biomimetic Lipid Membranes In Situ with FluidFM

The creation of biologically inspired artificial membranes on substrates with custom size and in close proximity to each other not only provides a platform to study biological processes in a simplified manner, but they also constitute building blocks for chemical or biological sensors integrated in microfluidic devices. Scanning probe lithography tools such as dip-pen nanolithography (DPN) have opened a new paradigm in this regard, although they possess some inherent drawbacks like the need to operate in air environment or the limited choice of lipids that can be patterned. In this work, we propose the use of the fluid force microscopy (FluidFM) technology to fabricate biomimetic membranes without losing the multiplexing capability of DPN but gaining flexibility in lipid inks and patterning environment. We shed light on the driving mechanisms of the FluidFM-mediated lithography processes in air and liquid. The obtained results should prompt the creation of more realistic biomimetic membranes with arbitrary complex phospholipid mixtures, cholesterol, and potential functional membrane proteins directly patterned in physiological environment.

Rapid Capture of Cancer Extracellular Vesicles by Lipid Patch Microarrays

Extracellular vesicles (EVs) contain various bioactive molecules such as DNA, RNA, and proteins, and play a key role in the regulation of cancer progression. Furthermore, cancer-associated EVs carry specific biomarkers and can be used in liquid biopsy for cancer detection. However, it is still technically challenging and time consuming to detect or isolate cancer-associated EVs from complex biofluids (e.g., blood). Here, a novel EV-capture strategy based on dip-pen nanolithography generated microarrays of supported lipid membranes is presented. These arrays carry specific antibodies recognizing EV- and cancer-specific surface biomarkers, enabling highly selective and efficient capture. Importantly, it is shown that the nucleic acid cargo of captured EVs is retained on the lipid array, providing the potential for downstream analysis. Finally, the feasibility of EV capture from patient sera is demonstrated. The demonstrated platform offers rapid capture, high specificity, and sensitivity, with only a small need in analyte volume and without additional purification steps. The platform is applied in context of cancer-associated EVs, but it can easily be adapted to other diagnostic EV targets by use of corresponding antibodies.

Multiplexed patterning of hybrid lipid membrane and protein arrays for cell signaling study

The supported lipid bilayer (SLB) is a powerful tool for studying dynamic cell-environment interactions and has been widely used for biosensing applications. Using a reusable microfluidic chip, we present here a strategy to fabricate highly multiplexed SLB and protein arrays for cell signaling research. This approach allows for the rapid patterning of hundreds of highly reproducible and size-tunable SLB arrays with distinct lipid composition and mobility. Using fluorescence microscopy and fluorescence correlation spectroscopy, the lipid mobility is found to play a central role for patterning this membrane assay. Adding protein rings as diffusion barriers extends the accessible mobility range and maintains long-term stability of the hybrid array. Subsequent protein functionalizations on the SLB could be conducted using standard conjugation methods. The utility of the hybrid array for cell signaling experiments is demonstrated by studying the immune NF-κB signaling, whose activity is triggered by the binding of the membrane receptor, toll-like-receptor 4 (TLR 4), to its ligand, lipopolysaccharide (LPS), that is functionalized on the SLB. The patterned array allows cells to adhere and spread on areas without LPS before migrating to interact with membrane-bound LPS to initiate NF-κB activation. Overall, the strategy offers an efficient route to rapidly generate easily controllable and multiplexed molecular arrays that can serve as versatile platforms for biosensing and cell signaling research.

Plasmonic Biosensing with Aluminum Thin Films under the Kretschmann Configuration

Aluminum has recently attracted considerable interest as a plasmonic material due to its unique optical properties, but most work has been limited to nanostructures. We report here SPR biosensing with aluminum thin-films using the standard Kretschmann configuration that has previously been dominated by gold films. Electron-beam physical vapor deposition (EBPVD)-prepared Al films oxidize in air to form a nanofilm of Al₂O_3, yielding robust stability for sensing applications in buffered solutions. FDTD simulations revealed a sharp plasmonic dip in the visible range that enables measurement of both angular shift and reflection intensity change at a fixed angle. Bulk and surface tests indicated that Al films exhibited superb sensitivity performance in both categories. Compared to Au, the Al/Al₂O₃ layer showed a marked effect of suppressing nonspecific binding from proteins in human serum. Further characterization indicated that Al film demonstrated a higher sensitivity and a wider working range than Au films when used for SPR imaging analysis. Combined with its economic and manufacturing benefits, the Al thin-film has the potential to become a highly advantageous plasmonic substrate to meet a wide range of biosensing needs in SPR configurations.

Enhanced Stability of Lipid Structures by Dip-Pen Nanolithography on Block-Type MPC Copolymer

Biomimetic lipid membranes on solid supports have been used in a plethora of applications, including as biosensors, in research on membrane proteins or as interfaces in cell experiments. For many of these applications, structured lipid membranes, e.g., in the form of arrays with features of different functionality, are highly desired. The stability of these features on a given substrate during storage and in incubation steps is key, while at the same time the substrate ideally should also exhibit antifouling properties. Here, we describe the highly beneficial properties of a 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymer for the stability of supported lipid membrane structures generated by dip-pen nanolithography with phospholipids (L-DPN). The MPC copolymer substrates allow for more stable and higher membrane stack structures in comparison to other hydrophilic substrates, like glass or silicon oxide surfaces. The structures remain highly stable under immersion in liquid and subsequent incubation and washing steps. This allows multiplexed functionalization of lipid arrays with antibodies via microchannel cantilever spotting (µCS), without the need of orthogonal binding tags for each antibody type. The combined properties of the MPC copolymer substrate demonstrate a great potential for lipid-based biomedical sensing and diagnostic platforms.

Cell membrane-camouflaged nanoparticles as drug carriers for cancer therapy

The translocation of natural cell membranes to the surface of synthetic nanoparticles, which allows man-made vectors to share merits and functionalities created by nature, has been a hot subject of research in the past decade. The resulting biomimetic nanoparticles not only retain the physicochemical properties of nanomaterials, but also inherit the advantageous functions of source cells. Combined with the preponderances of both synthetic and natural platforms, the optimized biomimetic systems can maximize the drug delivery efficiency. In this review, we first summarize the preparation strategies of the biomimetic systems from the perspective of the correlation between the properties of nanoparticles and cell membranes. Six types of cell membrane-camouflaged nanoparticles are further introduced with an emphasis on their properties and performance. Finally, a concluding remark regarding the primary challenges and opportunities associated with these nanoparticles is presented. STATEMENT OF SIGNIFICANCE: Translocation of natural cell membranes to the surface of synthetic nanoparticles has been repeatedly highlighted in the past decade to endow man-made vectors with merits and functionalities created by nature; therefore, the resulting biomimetic systems not only retain the physicochemical properties of nanomaterials but also inherit the biological functions of source cells for efficient drug delivery. To provide a timely review on this hot and rapidly developing subject of research, this paper summarized recent progress on the cell membrane-camouflaged nanoparticles as drug carriers for cancer therapy, and focused primarily on six different types of cell membrane-coated nanoparticles with an emphasis on the preparation strategies from the perspective of the correlation between the properties of nanoparticles and cell membrane.

Recruitment of receptors at supported lipid bilayers promoted by the multivalent binding of ligand-modified unilamellar vesicles

The development of model systems that mimic biological interactions and allow the control of both receptor and ligand densities, is essential for a better understanding of biomolecular processes, such as the recruitment of receptors at interfaces, at the molecular level. Here we report a model system based on supported lipid bilayers (SLBs) for the investigation of the clustering of receptors at their interface. Biotinylated SLBs, used as cell membrane mimics, were functionalized with streptavidin (SAv), used here as receptor. Subsequently, biotinylated small (SUVs) and giant (GUVs) unilamellar vesicles were bound to the SAv-functionalized SLBs by multivalent interactions and found to induce the recruitment of both SAv on the SLB surface and the biotin moieties in the vesicles. The recruitment of receptors was investigated with quartz crystal microbalance with dissipation monitoring (QCM-D), which allowed the identification of the biotin and SAv densities necessary to obtain receptor recruitment. At approx. 0.6% of biotin in the vesicles, a transition between dense and low vesicle packing was observed, which coincided with the transitions between recruitment in the vesicles vs. recruitment in the SLB and between full and partial use of the biotin moieties in the vesicle. Direct optical visualization of the clustering at the interface of individual GUVs with the SLB platform was achieved with fluorescence microscopy, showing recruitment of SAv at the contact area as well as the deformation of the vesicles upon binding. Different vesicle binding regimes were observed for lower and higher biotin densities in the vesicles and at the SLBs. A more quantitative analysis of the molecular parameters implied in the interaction, indicated that approx. 10% of the vesicle area constitutes the contact area. Moreover, the SUV binding and recruitment appeared to be fast on the analysis time scale, whereas the binding of GUVs is slower due to the larger SLB area over which SAv recruitment needs to occur. The mechanisms revealed in this study may provide insight in biological processes in which recruitment occurs.

The development of model systems that mimic biological interactions and allow the control of both receptor and ligand densities, is essential for a molecular understanding of biomolecular processes, such as the recruitment of receptors at interfaces.

RGD-functionalized supported lipid bilayers modulate pre-osteoblast adherence and promote osteogenic differentiation

Biomaterial integration into bone requires optimal surface conditions to promote osteoprogenitor behavior, which is affected by integrin-binding via arginine-glycine-aspartate (RGD). RGD-functionalized supported lipid bilayers (SLBs) might be interesting as biomaterial coating in bone regeneration, because they allow integration of proteins, for example, growth factors, cytokines, and/or antibacterial agents. Since it is unknown whether and how they affect osteoprogenitor adhesion and differentiation, the aim was to investigate adhesion, focal adhesion formation, morphology, proliferation, and osteogenic potential of pre-osteoblasts cultured on RGD-functionalized SLBs compared to unfunctionalized SLBs and poly-l-lysine (PLL). After 17 hr, pre-osteoblast density on SLBs without or with RGD was similar, but lower than on PLL. Cell surface area, elongation, and number and size of phospho-paxillin clusters were also similar. Cells on SLBs without or with RGD were smaller, more elongated, and had less and smaller phospho-paxillin clusters than on PLL. OPN expression was increased on SLBs with RGD compared to PLL. Moreover, after 1 week, COL1a1 expression was increased on SLBs without or with RGD. In conclusion, pre-osteoblast adhesion and enhanced differentiation were realized for the first time on RGD-functionalized SLBs, pointing to a new horizon in the management of bone regeneration using biomaterials. Together with SLBs nonfouling nature and the possibility of adjusting SLB fluidity and peptide content make SLBs highly promising as substrate to develop innovative biomimetic coatings for biomaterials in bone regeneration.

Surface Modification with Control over Ligand Density for the Study of Multivalent Biological Systems

In the study of multivalent interactions at interfaces, as occur for example at cell membranes, the density of the ligands or receptors displayed at the interface plays a pivotal role, affecting both the overall binding affinities and the valencies involved in the interactions. In order to control the ligand density at the interface, several approaches have been developed, and they concern the functionalization of a wide range of materials. Here, different methods employed in the modification of surfaces with controlled densities of ligands are being reviewed. Examples of such methods encompass the formation of self-assembled monolayers (SAMs), supported lipid bilayers (SLBs) and polymeric layers on surfaces. Particular emphasis is given to the methods employed in the study of different types of multivalent biological interactions occurring at the functionalized surfaces and their working principles.

Dendron-Functionalized Surface: Efficient Strategy for Enhancing the Capture of Microvesicles

Microvesicles (MVs) are used by various types of cells in the human body for intercellular communication, making them biomarkers of great potential for the early and non-evasive diagnosis of a spectrum of diseases. An integrated analysis including morphological, quantitative, and compositional studies is most desirable for the clinical application of MV detection; however, such integration is limited by the currently available analysis techniques. In this context, exploiting the phosphatidylserine (PS) exposure of MVs, we synthesized a series of dendritic molecules with PS-binding sites at the periphery. PS-dendron binding was studied at the molecular level using NMR approaches, whereas PS-containing membrane-dendron interaction was investigated in an aqueous environment using plasmon waveguide resonance spectroscopy. As a proof of concept, polyethylene terephthalate surface was functionalized with the synthetic dendrons, forming devices that can capture MVs to facilitate their subsequent analyses.

•

Phosphatidylserine-dendron interaction studies with NMR techniques

•

Lipid membrane binding enhancement using dendritic molecules

•

Dendron-grafted material for effective MV capture

Detachment of a fluid membrane from a substrate and vesiculation

The detachment dynamics of a fluid membrane with isotropic spontaneous curvature from a flat substrate are studied by using meshless membrane simulations. The membrane is detached from an open edge leading to vesicle formation. With strong adhesion, the competition between the bending and adhesion energies determines the minimum value of the spontaneous curvature for the detachment. In contrast, with weak adhesion, detachment occurs at smaller spontaneous curvatures due to the membrane thermal undulation. When parts of the membrane are pinned on the substrate, the detachment becomes slower and a remaining membrane patch forms straight or concave membrane edges. The edge undulation induces vesiculation of long strips and disk-shaped patches. Therefore, membrane rolling is obtained only for membrane strips shorter than the wavelength for deformation into unduloids. This suggests that the rolling observed for Ca²⁺-dependent membrane-binding proteins annexins A3, A4, A5, and A13 results from the anisotropic spontaneous curvature induced by the proteins.

Development of a cell-free and growth factor-free hydrogel capable of inducing angiogenesis and innervation after subcutaneous implantation

Despite significant progress in the field of biomaterials for bone repair, the lack of attention to the vascular and nervous networks within bone implants could be one of the main reasons for the delayed or impaired recovery of bone defects. The design of innovative biomaterials should improve the host capacity of healing to restore a functional tissue, taking into account that the nerve systems closely interact with blood vessels in the bone tissue. The aim of this work is to develop a cell-free and growth factor-free hydrogel capable to promote angiogenesis and innervation. To this end, we have used elastin-like polypeptides (ELPs), poly(ethylene glycol) (PEG) and increasing concentrations of the adhesion peptide IKVAV (25% (w/w) representing 1.7 mM and 50% (w/w) representing 4.1 mM) to formulate and produce hydrogels. When characterized in vitro, hydrogels have fine-tunable rheological properties, microporous structure and are biocompatible. At the biological level, 50% IKVAV composition up-regulated Runx2, Osx, Spp1, Vegfa and Bmp2 in mesenchymal stromal cells and Tek in endothelial cells, and sustained the formation of long neurites in sensory neurons. When implanted subcutaneously in mice, hydrogels induced no signals of major inflammation and the 50% IKVAV composition induced higher vessel density and formation of nervous terminations in the peripheral tissue. This novel composite has important features for tissue engineering, showing higher osteogenic, angiogenic and innervation potential in vitro, being not inflammatory in vivo, and inducing angiogenesis and innervation subcutaneously. STATEMENT OF SIGNIFICANCE: One of the main limitations in the field of tissue engineering remains the sufficient vascularization and innervation during tissue repair. In this scope, the development of advanced biomaterials that can support these processes is of crucial importance. Here, we formulated different compositions of Elastin-like polypeptide-based hydrogels bearing the IKVAV adhesion sequence. These compositions showed controlled mechanical properties, and were degradable in vitro. Additionally, we could identify in vitro a composition capable to promote neurite formation and to modulate endothelial and mesenchymal stromal cells gene expression, in view of angiogenesis and osteogenesis, respectively. When tested in vivo, it showed no signs of major inflammation and induced the formation of a highly vascularized and innervated neotissue. In this sense, our approach represents a potential advance in the development of new strategies to promote tissue regeneration, taking into account both angiogenesis and innervation.

Guiding mesenchymal stem cell differentiation using mesoporous silica nanoparticle-based films

The development of smart interfaces that can guide tissue formation is of great importance in the field of regenerative medicine. Nanoparticles represent an interesting class of materials that can be used to enhance regenerative treatments by enabling close control over surface properties and directing cellular responses. Moreover, nanoparticles can be used to provide temporally controlled delivery of (multiple) biochemical compounds. Here, we exploited the cargo loading and surface functionalization properties of mesoporous silica nanoparticles (MSNs) to design films that can guide human mesenchymal stem cell (hMSC) differentiation towards the osteogenic lineage. We developed biocompatible MSN-based films that support stem cell adhesion and proliferation and demonstrated that these MSN films simultaneously allowed efficient local delivery of biomolecules without effecting film integrity. Films loaded with the osteogenesis-stimulating drug dexamethasone (Dex) were able to induce osteogenic differentiation of hMSCs in vitro. Dex delivery from the films led to increased alkaline phosphatase levels and matrix mineralization compared to directly supplementing Dex to the medium. Furthermore, we demonstrated that Dex release kinetics can be modulated using surface modifications with supported lipid bilayers. Together, these data demonstrate that MSN films represent an interesting approach to create biomaterial interfaces with controllable biomolecule release and surface properties to improve the bioactivity of biomaterials. STATEMENT OF SIGNIFICANCE: Engineering surfaces that can control cell and tissue responses is one of the major challenges in biomaterials-based regenerative therapies. Here, we demonstrate the potential of mesoporous silica nanoparticles (MSNs) as drug-delivering surface coatings. First, we show differentiation of mesenchymal stem cells towards the bone lineage when in contact with MSN films loaded with dexamethasone. Furthermore, we demonstrate that modification of MSNs with supported lipid bilayer allows control over drug release dynamics and cell shape. Given the range of loadable cargos and the tunability of release kinetics, MSN coatings can be used to mimic the sequential appearance of bioactive factors during tissue regeneration, which will ultimately lead to biomaterials with improved bioactivity.

Writing Behavior of Phospholipids in Polymer Pen Lithography (PPL) for Bioactive Micropatterns

Lipid-based membranes play crucial roles in regulating the interface between cells and their external environment, the communication within cells, and cellular sensing. To study these important processes, various lipid-based artificial membrane models have been developed in recent years and, indeed, large-area arrays of supported lipid bilayers suit the needs of many of these studies remarkably well. Here, the direct-write scanning probe lithography technique called polymer pen lithography (PPL) was used as a tool for the creation of lipid micropatterns over large areas via polymer-stamp-mediated transfer of lipid-containing inks onto glass substrates. In order to better understand and control the lipid transfer in PPL, we conducted a systematic study of the influence of dwell time (i.e., duration of contact between tip and sample), humidity, and printing pressure on the outcome of PPL with phospholipids and discuss results in comparison to the more often studied dip-pen nanolithography with phospholipids. This is the first systematic study in phospholipid printing with PPL. Biocompatibility of the obtained substrates with up to two different ink compositions was demonstrated. The patterns are suitable to serve as a platform for mast cell activation experiments.

Weak Multivalent Binding of Influenza Hemagglutinin Nanoparticles at a Sialoglycan-Functionalized Supported Lipid Bilayer

Quantification of the multivalent interactions of influenza viruses binding at interfaces may provide ways to tackle key biological questions regarding influenza virulence and zoonoses. Yet, the deconvolution of the contributions of molecular and interfacial parameters, such as valency, interaction area, and receptor density, to the binding of whole viruses is hindered by difficulties in the direct determination of these parameters. We report here a chemical platform technology to study the binding of multivalent recombinant hemagglutinin (rHA) nanoparticles at artificial sialoglycan cell receptor-presenting interfaces in which all these parameters can be derived, thus allowing the desired full and quantitative binding analysis. SiO2 substrates were functionalized with supported lipid bilayers containing a targeted and tunable fraction of a biotinylated lipid, followed by the adsorption of streptavidin and biotinylated polyvalent 2,3- or 2,6-sialyl lactosamine (SLN). rHA nanoparticles were used as a virus mimic to provide a good prediction of the number of interactions involved in binding. Low nanomolar affinities and selectivities for binding at the 2,6-SLN platforms were observed for rHA particles from three different virus variants. When fitting the data to a multivalency model, the nanomolar overall affinity appears to be achieved by 6-9 HA-sugar molecular interaction pairs, which individually present a rapid association/dissociation behavior. This dynamic behavior may be an essential biological attribute in the functioning of the influenza virus.

Tissue-Inspired Interfacial Coatings for Regenerative Medicine

Biomedical devices have come a long way since they were first introduced as a medically interventional methodology in treating various types of diseases. Different techniques were employed to make the devices more biocompatible and promote tissue repair; such as chemical surface modifications, using novel materials as the bulk of a device, physical topological manipulations and so forth. One of the strategies that recently gained a lot of attention is the use of tissue-inspired biomaterials that are coated on the surface of biomedical devices via different coating techniques, such as the use of extracellular matrix (ECM) coatings, extracted cell membrane coatings, and so on. In this chapter, we will give a general overview of the different types of tissue-inspired coatings along with a summary of recent studies reported in this scientific arena.

Nanoarchitectonic-Based Material Platforms for Environmental and Bioprocessing Applications

The challenges of pollution, environmental science, and energy consumption have become global issues of broad societal importance. In order to address these challenges, novel functional systems and advanced materials are needed to achieve high efficiency, low emission, and environmentally friendly performance. A promising approach involves nanostructure-level controls of functional material design through a novel concept, nanoarchitectonics. In this account article, we summarize nanoarchitectonic approaches to create nanoscale platform structures that are potentially useful for environmentally green and bioprocessing applications. The introduced platforms are roughly classified into (i) membrane platforms and (ii) nanostructured platforms. The examples are discussed together with the relevant chemical processes, environmental sensing, bio-related interaction analyses, materials for environmental remediation, non-precious metal catalysts, and facile separation for biomedical uses.

Spatiotemporal Kinetics of Supported Lipid Bilayer Formation on Glass via Vesicle Adsorption and Rupture

Supported lipid bilayers (SLBs) represent one of the most popular mimics of the cell membrane. Herein, we have used total internal reflection fluorescence microscopy for in-depth characterization of the vesicle-mediated SLB formation mechanism on a common silica-rich substrate, borosilicate glass. Fluorescently labeling a subset of vesicles allowed us to monitor the adsorption of individual labeled vesicles, resolve the onset of SLB formation from small seeds of SLB patches, and track their growth via SLB-edge-induced autocatalytic rupture of adsorbed vesicles. This made it possible to perform the first quantitative measurement of the SLB front velocity, which is shown to increase up to 1 order of magnitude with time. This effect can be classified as dramatic because in many other physical, chemical, or biological kinetic processes the front velocity is either constant or decreasing with time. The observation was successfully described with a theoretical model and Monte Carlo simulations implying rapid local diffusion of lipids upon vesicle rupture.

Materials Nanoarchitectonics for Mechanical Tools in Chemical and Biological Sensing

In this Focus Review, nanoarchitectonic approaches for mechanical-action-based chemical and biological sensors are briefly discussed. In particular, recent examples of piezoelectric devices, such as quartz crystal microbalances (QCM and QCM-D) and a membrane-type surface stress sensor (MSS), are introduced. Sensors need well-designed nanostructured sensing materials for the sensitive and selective detection of specific targets. Nanoarchitectonic approaches for sensing materials, such as mesoporous materials, 2D materials, fullerene assemblies, supported lipid bilayers, and layer-by-layer assemblies, are highlighted. Based on these sensing approaches, examples of bioanalytical applications are presented for toxic gas detection, cell membrane interactions, label-free biomolecular assays, anticancer drug evaluation, complement activation-related multiprotein membrane attack complexes, and daily biodiagnosis, which are partially supported by data analysis, such as machine learning and principal component analysis.

In Vitro Model of the Gram-Negative Bacterial Cell Envelope for Investigation of Anti-Infective Permeation Kinetics

The cell envelope of Gram-negative bacteria is a formidable biological barrier, inhibiting the action of antibiotics by impeding their permeation into the intracellular environment. In-depth understanding of permeation through this barrier remains a challenge, despite its critical role in antibiotic activity. We therefore designed a divisible in vitro permeation model of the Gram-negative bacterial cell envelope, mimicking its three essential structural elements, the inner membrane and the periplasmic space as well as the outer membrane, on a Transwell setup. The model was characterized by contemporary imaging techniques and employed to generate reproducible quantitative and time-resolved permeation data for various fluorescent probes and anti-infective molecules of different structure and physicochemical properties. For a set of three fluorescent probes, the permeation through the overall membrane model was found to correlate with in bacterio permeation. Even more interestingly, for a set of six Pseudomonas quorum sensing inhibitors, such permeability data were found to be predictive for their corresponding in bacterio activities. Further exploration of the capabilities of the overall model yielded a correlation between the permeability of porin-independent antibiotics and published in bacterio accumulation data; a promising ability to provide structure-permeability information was also demonstrated. Such a model may therefore constitute a valuable tool for the development of novel anti-infective drugs.

About Chemical Strategies to Fabricate Cell-Instructive Biointerfaces with Static and Dynamic Complexity

Properly functioning cell-instructive biointerfaces are critical for healthy integration of biomedical devices in the body and serve as decisive tools for the advancement of our understanding of fundamental cell biological phenomena. Studies are reviewed that use covalent chemistries to fabricate cell-instructive biointerfaces. These types of biointerfaces typically result in a static presentation of predefined cell-instructive cues. Chemically defined, but dynamic cell-instructive biointerfaces introduce spatiotemporal control over cell-instructive cues and present another type of biointerface, which promises a more biomimetic way to guide cell behavior. Therefore, strategies that offer control over the lateral sorting of ligands, the availability and molecular structure of bioactive ligands, and strategies that offer the ability to induce physical, chemical and mechanical changes in situ are reviewed. Specific attention is paid to state-of-the-art studies on dynamic, cell-instructive 3D materials. Future work is expected to further deepen our understanding of molecular and cellular biological processes investigating cell-type specific responses and the translational steps toward targeted in vivo applications.

Interfacial Forces Dictate the Pathway of Phospholipid Vesicle Adsorption onto Silicon Dioxide Surfaces

The pathway of vesicle adsorption onto a solid support depends on the material composition of the underlying support, and there is significant interest in developing material-independent strategies to modulate the spectrum of vesicle-substrate interactions on a particular surface. Herein, using the quartz crystal microbalance-dissipation (QCM-D) technique, we systematically investigated how solution pH and membrane surface charge affect vesicle adsorption onto a silicon dioxide surface. While vesicle adsorption and spontaneous rupture to form complete supported lipid bilayer (SLBs) occurred in acidic conditions, it was discovered that a wide range of adsorption pathways occurred in alkaline conditions, including (i) vesicle adsorption and spontaneous rupture to form complete SLBs, (ii) vesicle adsorption and spontaneous rupture to form incomplete SLBs, (iii) irreversible adsorption of intact vesicles, (iv) reversible adsorption of intact vesicles, and (v) negligible adsorption. In general, SLB formation became more favorable with increasingly positive membrane surface charge although there were certain conditions at which attractive electrostatic forces were insufficient to promote vesicle rupture. To rationalize these findings, we discuss how solution pH and membrane surface charge affect interfacial forces involved in vesicle-substrate interactions. Taken together, our findings present a comprehensive picture of how interfacial forces dictate the pathway of phospholipid vesicle adsorption onto silicon dioxide surfaces and offer a broadly applicable framework to characterize the interactions between phospholipid vesicles and inorganic material surfaces.

Polymer Pen Lithography with Lipids for Large-Area Gradient Patterns

Gradient patterns comprising bioactive compounds over comparably (in regard to a cell size) large areas are key for many applications in the biomedical sector, in particular, for cell screening assays, guidance, and migration experiments. Polymer pen lithography (PPL) as an inherent highly parallel and large area technique has a great potential to serve in the fabrication of such patterns. We present strategies for the printing of functional phospholipid patterns via PPL that provide tunable feature size and feature density gradients over surface areas of several square millimeters. By controlling the printing parameters, two transfer modes can be achieved. Each of these modes leads to different feature morphologies. By increasing the force applied to the elastomeric pens, which increases the tip-surface contact area and boosts the ink delivery rate, a switch between a dip-pen nanolithography (DPN) and a microcontact printing (μCP) transfer mode can be induced. A careful inking procedure ensuring a homogeneous and not-too-high ink-load on the PPL stamp ensures a membrane-spreading dominated transfer mode, which, used in combination with smooth and hydrophilic substrates, generates features with constant height, independently of the applied force of the pens. Ultimately, this allows us to obtain a gradient of feature sizes over a mm² substrate, all having the same height on the order of that of a biological cellular membrane. These strategies allow the construction of membrane structures by direct transfer of the lipid mixture to the substrate, without requiring previous substrate functionalization, in contrast to other molecular inks, where structure is directly determined by the printing process itself. The patterns are demonstrated to be viable for subsequent protein binding, therefore adding to a flexible feature library when gradients of protein presentation are desired.

Supported lipid bilayer platforms to probe cell mechanobiology

Mammalian and bacterial cells sense and exert mechanical forces through the process of mechanotransduction, which interconverts biochemical and physical signals. This is especially important in contact-dependent signaling, where ligand-receptor binding occurs at cell-cell or cell-ECM junctions. By virtue of occurring within these specialized junctions, receptors engaged in contact-dependent signaling undergo oligomerization and coupling with the cytoskeleton as part of their signaling mechanisms. While our ability to measure and map biochemical signaling within cell junctions has advanced over the past decades, physical cues remain difficult to map in space and time. Recently, supported lipid bilayer (SLB) technologies have emerged as a flexible platform to mimic and perturb cell-cell and cell-ECM junctions, allowing one to study membrane receptor mechanotransduction. Changing the lipid composition and underlying substrate tunes bilayer fluidity, and lipid and ligand micro- and nano-patterning spatially control positioning and clustering of receptors. Patterning metal gridlines within SLBs confines lipid mobility and introduces mechanical resistance. Here we review fundamental SLB mechanics and how SLBs can be engineered as tunable cell substrates for mechanotransduction studies. Finally, we highlight the impact of this work in understanding the biophysical mechanisms of cell adhesion. This article is part of a Special Issue entitled: Interactions between membrane receptors in cellular membranes edited by Kalina Hristova.

Dynamic Cellular Interactions with Extracellular Matrix Triggered by Biomechanical Tuning of Low-Rigidity, Supported Lipid Membranes

The behavior of cells in a tissue is regulated by chemical as well as physical signals arising from their microenvironment. While gel-based substrates have been widely used for mimicking a range of substrate rigidities, there is a need for the development of low rigidity substrates for mimicking the physical properties of soft tissues. In this study, the authors report the development of a supported lipid bilayer (SLB)-based low rigidity substrate for cell adhesion studies. SLBs are functionalized with either collagen I or fibronectin via covalent, amine coupling to a carboxyl group-modified lipid molecule. While the lipid molecules in the bilayer show long-range lateral mobility, the covalently functionalized extracellular matrix (ECM) proteins are immobile on the bilayer surface. Specific adhesion of cells results in an enrichment of the protein on the bilayer and the appearance of a zone of depletion around the cells. Further, the lateral reorganization of the ECM proteins is controlled by altering the fluidity of lipid molecules in the substrate. Thus, the experimental platform developed in this study can be utilized for addressing basic questions related to cell adhesion on low rigidity substrates as well as biomedical applications requiring adhesion of cells to low rigidity substrates.