Self-assembled photonic structures

Enhanced Photocatalytic Properties and Photoinduced Crystallization of TiO2-Fe2O3 Inverse Opals Fabricated by Atomic Layer Deposition

The use of solar energy for photocatalysis holds great potential for sustainable pollution reduction. Titanium dioxide (TiO2) is a benchmark material, effective under ultraviolet light but limited in visible light utilization, restricting its application in solar-driven photocatalysis. Previous studies have shown that semiconductor heterojunctions and nanostructuring can broaden the TiO2's photocatalytic spectral range. Semiconductor heterojunctions are interfaces formed between two different semiconductor materials that can be engineered. Especially, type II heterojunctions facilitate charge separation, and they can be obtained by combining TiO2 with, for example, iron(III) oxide (Fe2O3). Nanostructuring in the form of 3D inverse opals (IOs) demonstrated increased TiO2 light absorption efficiency of the material, by tailoring light-matter interactions through their photonic crystal structure and specifically their photonic stopband, which can give rise to a slow photon effect. Such effect is hypothesized to enhance the generation of free charges. This work focuses on the above-described effects simultaneously, through the synthesis of TiO2-Fe2O3 IOs via multilayer atomic layer deposition (ALD) and the characterization of their photocatalytic activities. Our results reveal that the complete functionalization of TiO2 IOs with Fe2O3 increases the photocatalytic activity through the slow photon effect and semiconductor heterojunction formation. We systematically explore the influence of Fe2O3 thickness on photocatalytic performance, and a maximum photocatalytic rate constant of 1.38 ± 0.09 h-1 is observed for a 252 nm template TiO2-Fe2O3 bilayer IO consisting of 16 nm TiO2 and 2 nm Fe2O3. Further tailoring the performance by overcoating with additional TiO2 layers enhances photoinduced crystallization and tunes photocatalytic properties. These findings highlight the potential of TiO2-Fe2O3 IOs for efficient water pollutant removal and the importance of precise nanostructuring and heterojunction engineering in advancing photocatalytic technologies.

Heat: A powerful tool for colloidal particle shaping

Colloidal particles of spherical shape are important building blocks for nanotechnological applications. Materials with tailored physical properties can be directly synthesized from self-assembled particles, as is the case for colloidal photonic crystals. In addition, colloidal monolayers and multilayers can be exploited as a mask for the fabrication of complex nanostructures via a colloidal lithography process for applications ranging from optoelectronics to sensing. Several techniques have been adopted to modify the shape of both individual colloidal particles and colloidal masks. Thermal treatment of colloidal particles is an effective route to introduce colloidal particle deformation or to manipulate colloidal masks (i.e. to tune the size of the interstices between colloidal particles) by heating them at elevated temperatures above a certain critical temperature for the particle material. In particular, this type of morphological manipulation based on thermal treatments has been extensively applied to polymer particles. Nonetheless, interesting shaping effects have been observed also in inorganic materials, in particular silica particles. Due to their much less complex implementation and distinctive shaping effects in comparison to dry etching or high energy ion beam irradiation, thermal treatments turn out to be a powerful and competitive tool to induce colloidal particle deformation. In this review, we examine the physicochemical principles and mechanisms of heat-induced shaping as well as its experimental implementation. We also explore its applications, going from tailored masks for colloidal lithography to the fabrication of colloidal assemblies directly useful for their intrinsic optical, thermal and mechanical properties (e.g. thermal switches) and even to the synthesis of supraparticles and anisotropic particles, such as doublets.

Elasticity Mapping of Colloidal Glasses Reveals the Interplay between Mesoscopic Order and Granular Mechanics

Colloidal glasses (CGs) made of polymer (polymethylmethacrylate) nanoparticles are promising metamaterials for light and sound manipulation, but fabrication imperfections and fragility can limit their functionality and applications. Here, the vibrational mechanical modes of nanoparticles are probed to evaluate the nanomechanical and morphological properties of various CGs architectures. Utilizing the scanning micro-Brillouin light scattering (µ-BLS), the effective elastic constants and nanoparticles' sizes is determined as a function of position in a remote and non-destructive manner. This method is applied to CG mesostructures with different spatial distributions of their particle size and degree of order. These include CGs with single-sized systems, binary mixtures, bilayer structures, continuous gradient structures, and gradient mixtures. The microenvironments govern the local mechanical properties and highlight how the granular mesostructure can be used to develop durable functional polymer colloids. A size effect is revealed on the effective elastic constant, with the smallest particles and ordered assemblies forming robust structures, and classify the various types of mesoscale order in terms of their mechanical stiffness. The work establishes scanning µ-BLS as a tool for mapping elasticity, particle size, and local structure in complex nanostructures.

Random lasing in micron-sized individual supraparticles

Self-assembled fluorescent particles have shown promise as a potential structure for random lasers. However, obtaining micron-sized random lasers made with fluorescent particles remains a challenge. Theoretically, achieving micron-sized random lasers could be possible by assembling supraparticles composed of colloidal particles. Despite extensive research on supraparticles, the generation of random lasers from this structure is rarely reported. In this study, we introduce a rapid and efficient method for producing supraparticles from fluorescent particles. The resulting supraparticles exhibit diameters ranging from 50 to 150 µm with particles well-connected and uniformly distributed throughout their structure. Under optical excitation, supraparticles with a diameter larger than 80 µm demonstrate lasing emission with a threshold of approximately 77 μJ·mm-2. Larger supraparticles exhibit a distinct redshift in lasing wavelength compared to the smaller ones. Specifically, the central peak lasing wavelength shows a shift of about 7.5 nm as the supraparticle diameter increases from 80 to 150 μm.

Low-triggering-potential electrochemiluminescence based on mental-organic frameworks encapsulation of ruthenium for synthetic cathinone detection by coupling photonic crystal light-scattering signal amplification of covalent-organic frameworks

Developing effective electrochemiluminescence (ECL) platforms is always an essential concern in highly sensitive bioanalysis. In this work, a low-triggering-potential ECL sensor was designed for detecting synthetic cathinone 3,4-methylenedioxypyrovalerone (MDPV) based on a dual-signal amplification strategy. Initially, a probe was created by integrating Ruthenium into the hollow porphyrin-based MOF (PCN-222) structure to decrease the excitation potential and enhance ECL performance without external co-reaction accelerators. Additionally, for the first time, photonic crystals (PCs) assembled from covalent organic frameworks (COFs) were employed to amplify the ECL signal, thereby increasing the photon flux and the loading capacity of the ECL emitter to enhance sensitivity of the sensor. In the presence of the target MDPV, the aptamer labeled with Ferrocene (Fc) experienced conformational changes, causing Fc to approach the luminophore and resulting in ECL quenching. This effect was attributed to aptamer's conformational changes induced by the target, directly correlating with the target concentration. The constructed sensor showed good linearity with the target MDPV concentration, covering a dynamic range from 1.0 × 10-14 to 1.0 × 10-6 g/L and achieved an ultra-low detection limit of 4.79 × 10-15 g/L. This work employed dual amplification strategies to enhance ECL signals effectively, providing a novel method for developing highly responsive and bioactive sensors.

Structural Colored Fabric Based on Monodisperse Cu2O Microspheres

Structural-colored fabrics have been attracting much attention due to their eco-friendliness, dyelessness, and anti-fading properties. Monodisperse microspheres of metal, metal oxide, and semiconductors are promising materials for creating photonic crystals and structural colors owing to their high refractive indices. Herein, Cu2O microspheres were prepared by a two-step reduction method at room temperature; the size of Cu2O microspheres was controlled by changing the molar ratio of citrate to Cu2+; and the size of Cu2O microspheres was tuned from 275 nm to 190 nm. The Cu2O microsphere dispersions were prepared with the monodispersity of Cu2O microspheres. Furthermore, the effect of the concentration of Cu2O microsphere and poly(butyl acrylate) on the structural color was also evaluated. Finally, the stability of the structural color against friction and bending was also tested. The results demonstrated that the different structural colors of fabrics were achieved by adjusting the size of the Cu2O microsphere, and the color fastness of the structural color was improved by using poly(butyl acrylate) as the adhesive.

Photonic Nanochains for Continuous Glucose Monitoring in Physiological Environment

Diabetes is a common disease that seriously endangers human health. Continuous glucose monitoring (CGM) is important for the prevention and treatment of diabetes. Glucose-sensing photonic nanochains (PNCs) have the advantages of naked-eye colorimetric readouts, short response time and noninvasive detection of diabetes, showing immense potential in CGM systems. However, the developed PNCs cannot disperse in physiological environment at the pH of 7.4 because of their poor hydrophilicity. In this study, we report a new kind of PNCs that can continuously and reversibly detect the concentration of glucose (Cg) in physiological environment at the pH of 7.4. Polyacrylic acid (PAA) added to the preparation of PNCs forms hydrogen bonds with polyvinylpyrrolidone (PVP) in Fe3O4@PVP colloidal nanoparticles and the hydrophilic monomer N-2-hydroxyethyl acrylamide (HEAAm), which increases the content of PHEAAm in the polymer shell of prepared PNCs. Moreover, 4-(2-acrylamidoethylcarbamoyl)-3-fluorophenylboronic acid (AFPBA), with a relatively low pKa value, is used as the glucose-sensing monomer to further improve the hydrophilicity and glucose-sensing performances of PNCs. The obtained Fe3O4@(PVP-PAA)@poly(AFPBA-co-HEAAm) PNCs disperse in artificial serum and change color from yellow-green to red when Cg increases from 3.9 mM to 11.4 mM, showing application potential for straightforward CGM.

Color construction of multi-colored carbon fibers using glucose

Carbon fibers (CFs) have attracted attention in the automotive, aviation, and aerospace industries. However, the coloration of CFs is challenging due to their brittleness, inertness, complexity, and time/energy-intensive processes. Herein, inspired by the naturally grown protrusive nanostructures on the green central surface of peacock back feathers, we report an in-situ self-growing strategy for developing carbon spheres (CSs) on the CFs surface to achieve color tuning. This is achieved via the dynamic growth of CSs using glucose as the feeding material. Combined with the coloration process, the interaction between CSs and CFs promotes stable interfacial forces in integrated molding. This strategy allows the coloring system to continuously vary its color in a designated manner, thereby, endowing it with satisfactory mechanical robustness, acid durability, and light fastness. We anticipate this developed approach can be potentially competitive in the color construction of CFs with multi-colors due to its low-cost manufacturing.

Grain Crystallinity, Anisotropy, and Boundaries Govern Microscale Hydrodynamic Transport in Semicrystalline Porous Media

Polycrystallinity is often an unintended consequence of real manufacturing processes used to produce designer porous media with deterministic and periodic architectures. Porous media are widely employed as high-surface conduits for fluid transport; unfortunately, even small concentrations of defects in the long-range order become the dominant impediment to hydrodynamic transport. In this study, we isolate the effects of these defects using a microfluidic analogy to energy transport in atomic polycrystals by directly tracking capillary transport through polycrystalline inverse opals. We reveal─using high-fidelity florescent microscopy─the boundary-limited nature of flow motions, along with nonlinear impedance elements introduced by the presence of "grain boundaries" that are separating the well-ordered "crystalline grains". Coupled crystallinity, anisotropy, and linear defect density contribute to direction-dominated flow characteristics in a discretized manner rather than traditional diffusive-like flow patterns. Separating individual crystal grains' transport properties from polycrystals along with new probabilistic data sets enables demonstrating statistical predictive models. These results provide fundamental insight into transport phenomena in (poly)crystalline porous media beyond the deterministic properties of an idealized unit cell and bridge the gap between engineering models and the ubiquitous imperfections found in manufactured porous materials.

Hydrogel-Encased Photonic Microspheres with Enhanced Color Saturation and High Suspension Stability

Regular arrays of colloidal particles can produce striking structural colors without the need for any chemical pigments. Regular arrays of colloidal particles can be processed into microparticles via emulsion templates for use as structural colorants. Photonic microparticles, however, suffer from intense incoherent scattering and lack of suspension stability. We propose a microfluidic technique to generate hydrogel-shelled photonic microspheres that display enhanced color saturation and suspension stability. We created these microspheres using oil-in-water-in-oil (O/W/O) double-emulsion droplets with well-defined dimensions with a capillary microfluidic device. The inner oil droplet contains silica particles in a photocurable monomer, while the middle water droplet carries the hydrogel precursor. Within the inner oil droplet, silica particles arrange into crystalline arrays due to solvation-layer-induced interparticle repulsion. UV irradiation solidifies the inner photonic core and the outer hydrogel shell. The hydrogel shell reduces white scattering and enhances the suspension stability in water. Notably, the hydrogel precursor in the water droplet aids in maintaining the solvation layer, resulting in enhanced crystallinity and richer colors compared with microspheres from O/W single-emulsion droplets. These hydrogel-encased photonic microspheres show promise as structural colorants in water-based inks and polymer composites.

Imaging cellular forces with photonic crystals

Current techniques for visualizing and quantifying cellular forces have limitations in live cell imaging, throughput, and multi-scale analysis, which impede progress in cell force research and its practical applications. We developed a photonic crystal cellular force microscopy (PCCFM) to image vertical cell forces over a wide field of view (1.3 mm ⨯ 1.0 mm, a 10 ⨯ objective image) at high speed (about 20 frames per second) without references. The photonic crystal hydrogel substrate (PCS) converts micro-nano deformations into perceivable color changes, enabling in situ visualization and quantification of tiny vertical cell forces with high throughput. It enabled long-term, cross-scale monitoring from subcellular focal adhesions to tissue-level cell sheets and aggregates.

The entropy-controlled strategy in self-assembling systems

Self-assembly of various building blocks has been considered as a powerful approach to generate novel materials with tailorable structures and optimal properties. Understanding physicochemical interactions and mechanisms related to structural formation and transitions is of essential importance for this approach. Although it is well-known that diverse forces and energies can significantly contribute to the structures and properties of self-assembling systems, the potential entropic contribution remains less well understood. The past few years have witnessed rapid progress in addressing the entropic effects on the structures, responses, and functions in the self-assembling systems, and many breakthroughs have been achieved. This review provides a framework regarding the entropy-controlled strategy of self-assembly, through which the structures and properties can be tailored by effectively tuning the entropic contribution and its interplay with the enthalpic counterpart. First, we focus on the fundamentals of entropy in thermodynamics and the entropy types that can be explored for self-assembly. Second, we discuss the rules of entropy in regulating the structural organization in self-assembly and delineate the entropic force and superentropic effect. Third, we introduce the basic principles, significance and approaches of the entropy-controlled strategy in self-assembly. Finally, we present the applications where this strategy has been employed in fields like colloids, macromolecular systems and nonequilibrium assembly. This review concludes with a discussion on future directions and future research opportunities for developing and applying the entropy-controlled strategy in complex self-assembling systems.

3D Printing Hierarchically Nano-Ordered Structures

Natural materials are composed of a limited number of molecular building blocks and their exceptional properties are governed by their hierarchical structure. However, this level of precision is unattainable with current state-of-the-art materials for 3D printing. Herein, new self-assembled printable materials based on block copolymers (BCPs) enabling precise control of the nanostructure in 3D are presented. In particular, well-defined BCPs consisting of poly(styrene) (PS) and a polymethacrylate-based copolymer decorated with printable units are selected as suitable self-assembled materials and synthesized using controlled radical polymerization. The synthesized library of BCPs are utilized as printable formulations for the fabrication of complex 3D microstructures using two-photon laser printing. By fine-tuning the BCP composition and solvent in the formulations, the fabrication of precise 3D nano-ordered structures is demonstrated for the first time. A key point of this work is the achievement of controlled nano-order within the entire 3D structures. Thus, imaging of the cross-sections of the 3D printed samples is performed, enabling the visualization also from the inside. The presented versatile approach is expected to create new avenues for the precise design of functional polymer materials suitable for high-resolution 3D printing exhibiting tailor-made nanostructures.

Fano-Like Resonance from Disorder Correlation in Vacancy-Doped Photonic Crystals

By preparing colloidal crystals with random missing scatterers, crystals are created where disorder is embodied as vacancies in an otherwise perfect lattice. In this special system, there is a critical defect concentration where light propagation undergoes a transition from an all but perfect reflector (for the spectral range defined by the Bragg condition), to a metamaterial exhibiting an enhanced transmission phenomenon. It is shown that this behavior can be phenomenologically described in terms of Fano-like resonances. The results show that the Fano's parameter q experiences a sign change signaling the transition from a perfect crystal exhibiting a reflectance Bragg peak, through a state where background scattering is maximum and Bragg reflectance reaches a minimum to a point where the system reenters a low scattering state recovering ordinary Bragg diffraction. A simple dipolar model considering the correlation between scatterers and vacancies is proposed and the reported evolution of the Fano-like scattering is explained in terms of the emerging covariance between the optical paths and polarizabilities and the effect of field enhancement in photonic crystal (PhC) defects.

Assembly of Covalent Organic Frameworks into Colloidal Photonic Crystals

Self-assembly of colloidal particles into ordered superstructures is an important strategy to discover new materials, such as catalysts, plasmonic sensing materials, storage systems, and photonic crystals (PhCs). Here we show that porous covalent organic frameworks (COFs) can be used as colloidal building particles to fabricate porous PhCs with an underlying face-centered cubic (fcc) arrangement. We demonstrate that the Bragg reflection of these can be tuned by controlling the size of the COF particles and that species can be adsorbed within the pores of the COF particles, which in turn alters the Bragg reflection. Given the vast number of existing COFs, with their rich properties and broad modularity, we expect that our discovery will enable the development of colloidal PhCs with unprecedented functionality.

Tunable assembly of host-guest colloidal crystals

Entropy compartmentalization provides new self-assembly routes to colloidal host-guest (HG) structures. Leveraging host particle shape to drive the assembly of HG structures has only recently been proposed and demonstrated. However, the extent to which the guest particles can dictate the structure of the porous network of host particles has not been explored. In this work, by modifying only the guest shape, we show athermal, binary mixtures of star-shaped host particles and convex polygon-shaped guest particles assemble as many as five distinct crystal structures, including rotator and discrete rotator guest crystals, two homoporous host crystals, and one heteroporous host crystal. Edge-to-edge alignment of neighboring stars results in the formation of three distinct pore motifs, whose preferential formation is controlled by the size and shape of the guest particles. Finally, we confirm, via free volume calculations, that assembly is driven by entropy compartmentalization, where the hosts and guests contribute differently to the free energy of the system; free volume calculations also explain differences in assembly based on guest shape. These results provide guest design rules for assembling colloidal HG structures, especially on surfaces and interfaces.

Evaporation-driven Supraparticle Synthesis by Self-Lubricating Colloidal Dispersion Microdrops

The surface-templated evaporation-driven (S-TED) method that uses liquid-repellent surfaces has attracted considerable attention for its use in fabricating supraparticles of defined shape, size, and porosity. However, challenges in achieving mass production have impeded the widespread adoption of the S-TED method. To overcome this limit, we introduce an evaporation-driven "multiple supraparticle" synthesis by drying arrays of self-lubricating colloidal dispersion microdrops. To facilitate this synthetic method, a hydrophilic micropattern is prepared on a hydrophobic substrate as a template. During the removal of the substrate out of a dispersion, liquid drops are trapped and generate a microdrop array. To produce supraparticles, the contact lines of the trapped drops must be able to recede freely during evaporation. However, hydrophilic micropatterns induce strong contact line pinning for microdrops that hinders supraparticle formation. Herein, we solve this contradiction by employing an Ouzo-like colloidal dispersion, where we can control the wettability of the drop trapping domain. The self-lubrication effect provided by the Ouzo-like solution enables smooth movement of the drops' contact lines during evaporation, thereby resulting in the successful fabrication of supraparticle arrays even within the trapping domain. This strategy offers a promising and scalable approach for large-scale evaporation-driven supraparticle synthesis with a potential for extension to various primary colloidal particles, further broadening its applicability.

Bio-inspired optical structures for enhancing luminescence

Luminescence is an essential signal for many plants, insects, and marine organisms to attract the opposite sex, avoid predators, and so on. Most luminescent living organisms have ingenious optical structures which can help them get high luminescent performances. These remarkable and efficient structures have been formed by natural selection from long-time evolution. Researchers keenly observed the enhanced luminescence phenomena and studied how these phenomena happen in order to learn the characteristics of bio-photonics. In this review, we summarize the optical structures for enhancing luminescence and their applications. The structures are classified according to their different functions. We focus on how researchers use these biological inspirations to enhance different luminescence processes, such as chemiluminescence (CL), photoluminescence (PL), and electroluminescence (EL). It lays a foundation for further research on the applications of luminescence enhancement. Furthermore, we give examples of luminescence enhancement by bio-inspired structures in information encryption, biochemical detection, and light sources. These examples show that it is possible to use bio-inspired optical structures to solve complex problems in optical applications. Our work will provide guidance for research on biomimetic optics, micro- and nano-optical structures, and enhanced luminescence.

From Self-Assembly of Colloidal Crystals toward Ordered Porous Layer Interferometry

Interferometry-based, reflectometric, label-free biosensors have made significant progress in the analysis of molecular interactions after years of development. The design of interference substrates is a key research topic for these biosensors, and many studies have focused on porous films prepared by top-down methods such as porous silicon and anodic aluminum oxide. Lately, more research has been conducted on ordered porous layer interferometry (OPLI), which uses ordered porous colloidal crystal films as interference substrates. These films are made using self-assembly techniques, which is the bottom-up approach. They also offer several advantages for biosensing applications, such as budget cost, adjustable porosity, and high structural consistency. This review will briefly explain the fundamental components of self-assembled materials and thoroughly discuss various self-assembly techniques in depth. We will also summarize the latest studies that used the OPLI technique for label-free biosensing applications and divide them into several aspects for further discussion. Then, we will comprehensively evaluate the strengths and weaknesses of self-assembly techniques and discuss possible future research directions. Finally, we will outlook the upcoming challenges and opportunities for label-free biosensing using the OPLI technique.

Quantitative Optical and Structural Comparison of 3D and (2+1)D Colloidal Photonic Crystals

Colloidal crystals are excellent model systems to study self-assembly and structural coloration because their periodicities coincide with the wavelength range of visible light. Different assembly methods inherently introduce characteristic defects and irregularities, even with nearly monodisperse colloidal particles. Here, we investigate how these imperfections influence the structural coloration by comparing two techniques to obtain colloidal crystals. 3D colloidal crystals produced by convective assembly are well-ordered and periodically arranged but show microscopic cracks. (2+1)D colloidal crystals fabricated by stacking individual monolayers show a decreased hexagonal order and limited crystal registration between single monolayers in the z-direction. We investigate the optical properties of both systems by comparing identical numbers of layers using correlative microspectroscopy. These measurements show that the less ordered (2+1)D colloidal crystals exhibit higher reflected light intensities. Macroscopic reflection integrating all angles shows that the reflected light intensity levels out with an increasing number of layers, whereas incoherent scattering increases. Although both types of colloidal crystal show similar angle-dependent color shifts in specular reflection, the less-ordered structure of the (2+1)D colloidal crystal scatters light within a larger angular range under diffusive illumination. Our results suggest that structural coloration is surprisingly robust toward local defects and irregularities.

Continuous flow microfluidics for colloidal particle assembly on porous substrates

Self-assembly of colloidal particles for 'bottom-up' fabrication of various patterns and structures is critical for a range of applications including, but not limited to, energy generation and storage, nanomaterial structures, biomimetics, and biosensing. Multiple self-assembly techniques, such as substrate templating-via topological or chemical patterning-and solvent evaporation were discussed in our previous papers and have been developed for the deposition of patterned self-assembled structures, such as bands of colloidal particles, on various substrates. While the templating techniques are limited in applications due to the requirements for pattern-specific prior substrate engineering to fabricate the desired structure, solvent evaporation requires longer assembly times and precise control over environmental conditions. In this paper, a template-free, continuous flow process, which is facilitated by continuous solvent drainage through porous substrates, is demonstrated for the self-assembly of colloidal particles into high-aspect ratio (>10³, length to width) structures, such as linear arrays or grid structures. Colloidal particles were assembled both on polymeric and metallic porous membranes, with rapid assembly times.

Thermofluidic assembly of colloidal crystals

Colloidal crystals are interesting as functional structures due to their emergent photonic properties like photonic stop bands and bandgaps that can be used to redirect light. They are commonly formed by a drying process that is assisted by capillary forces at the drying fronts. In this manuscript, we demonstrate the optically induced dynamic thermofluidic assembly of 2D and 3D colloidal crystals. We quantify in experiment and simulation the structure formation and identify thermo-osmosis and temperature induced depletion interactions as the key contributors to the colloidal crystal formation. The non-equilibrium nature of the assembly of colloidal crystals and its dynamic control by laser-induced local heating promise new possibilities for a versatile formation of photonic structures inaccessible by equilibrium processes.

A Continuous Gradient Colloidal Glass

Colloidal crystals and glasses manipulate light propagation depending on their chemical composition, particle morphology, and mesoscopic structure. This light-matter interaction has been intensely investigated, but a knowledge gap remains for mesostructures comprising a continuous property gradient of the constituting particles. Here, a general synthetic approach to bottom-up fabrication of continuous size gradient colloidal ensembles is introduced. First, the technique synthesizes a dispersion with a specifically designed gradual particle size distribution. Second, self-assembly of this dispersion yields a photonic colloidal glass with a continuous size gradient from top to bottom. Local and bulk characterization methods are used to highlight the significant potential of this mesostructure, resulting in vivid structural colors along, and in superior light scattering across the gradient. The process describes a general pathway to mesoscopic gradients. It can expectedly be transferred to a variety of other particle-based systems where continuous gradients will provide novel physical insights and functionalities.

Bioinspired Colloidal Photonic Composites: Fabrications and Emerging Applications

Organisms in nature have evolved unique structural colors and stimuli-responsive functions for camouflage, warning, and communication over millions of years, which are essential to their survival in harsh conditions. Inspired by these characteristics, colloidal photonic composites (CPCs) composed of colloidal photonic crystals embedded in the polymeric matrix are artificially prepared and show great promise in applications. This review focuses on the summary of building blocks, i.e., colloidal particles and polymeric matrices, and constructive strategies from the perspective of designing CPCs with robust performance and specific functionality. Furthermore, their state-of-the-art applications are also discussed, including colorful coatings, anti-counterfeiting, and regulation of photoluminescence, especially in the field of visualized sensing. Finally, current challenges and potential for future developments in this field are discussed. The purpose of this review is not only to clarify the design principle for artificial CPCs but also to serve as a roadmap for the exploration of next-generation photonic materials.

Flow lithography for structured microparticles: fundamentals, methods and applications

Structured microparticles, with unique shapes, customizable sizes, multiple materials, and spatially-defined chemistries, are leading the way for emerging 'lab on a particle' technologies. These microparticles with engineered designs find applications in multiplexed diagnostics, drug delivery, single-cell secretion assays, single-molecule detection assays, high throughput cytometry, micro-robotics, self-assembly, and tissue engineering. In this article we review state-of-the-art particle manufacturing technologies based on flow-assisted photolithography performed inside microfluidic channels. Important physicochemical concepts are discussed to provide a basis for understanding the fabrication technologies. These photolithography technologies are compared based on the structural as well as compositional complexity of the fabricated particles. Particles are categorized, from 1D to 3D particles, based on the number of dimensions that can be independently controlled during the fabrication process. After discussing the advantages of the individual techniques, important applications of the fabricated particles are reviewed. Lastly, a future perspective is provided with potential directions to improve the throughput of particle fabrication, realize new particle shapes, measure particles in an automated manner, and adopt the 'lab on a particle' technologies to other areas of research.

Frequency-controlled electrophoretic mobility of a particle within a porous, hollow shell

The unique properties of yolk-shell or rattle-type particles make them promising candidates for applications ranging from switchable photonic crystals, to catalysts, to sensors. To realize many of these applications it is important to gain control over the dynamics of the core particle independently of the shell.

HYPOTHESIS

The core particle may be manipulated by an AC electric field with rich frequency-dependent behavior.

EXPERIMENTS

Here, we explore the frequency-dependent dynamic electrophoretic mobility of a charged core particle within a charged, porous shell in AC electric fields both experimentally using liquid-phase electron microscopy and numerically via the finite-element method. These calculations solve the Poisson-Nernst-Planck-Stokes equations, where the core particle moves according to the hydrodynamic and electric forces acting on it.

FINDINGS

In experiments the core exhibited three frequency-dependent regimes of field-driven motion: (i) parallel to the field, (ii) diffusive in a plane orthogonal to the field, and (iii) unbiased random motion. The transitions between the three observed regimes can be explained by the level of matching between the time required to establish ionic gradients in the shell and the period of the AC field. We further investigated the effect of shell porosity, ionic strength, and inner-shell radius. The former strongly impacted the core's behavior by attenuating the field inside the shell. Our results provide physical understanding on how the behavior of yolk-shell particles may be tuned, thereby enhancing their potential for use as building blocks for switchable photonic crystals.

Modeling colloidal interactions that predict equilibrium and non-equilibrium states

Modulating the interaction potential between colloids suspended in a fluid can trigger equilibrium phase transitions as well as formation of non-equilibrium 'arrested states' such as gels and glasses. Faithful representation of such interactions are essential for using simulation to interrogate the microscopic details of non-equilibrium behavior, and for extrapolating observations to new regions of phase space that are difficult to explore in experiment. Although the extended law of corresponding states predicts equilibrium phases for systems with short-ranged interactions, it proves inadequate for equilibrium predictions of systems with longer-ranged interactions, and for predicting non-equilibrium phenomena in systems with either short-ranged or long-ranged interactions. These shortcomings highlight the need for new approaches to represent and disambiguate interaction potentials that replicate both equilibrium and non-equilibrium phase behavior. In this work, we use experiments and simulations to study a system with long-ranged thermoresponsive colloidal interactions and explore whether a resolution to this challenge can be found in regions of the phase diagram where temporal effects influence material state. We demonstrate that the conditions for non-equilibrium arrest by colloidal gelation are sensitive to both the shape of the interaction potential and the thermal quench rate. We exploit this sensitivity to propose a kinetics-based algorithm to extract distinct arrest conditions for candidate potentials that accurately selects between potentials that differ in shape but share the same predicted equilibrium structure. The method reveals that each potential has a quantitatively distinct arrest line, providing insight into how the shape of longer-ranged potentials influences the conditions for colloidal gelation.

Iridescent Colloidal Crystals Composed of SiO2 Porous Hollow Sphere for SERS Application

In recent years, the application of low-refractive-index materials in the optical field has attracted considerable attention due to it high transmittance and high optical sensitivity. In this study, we synthesized SiO₂ porous hollow spheres (SPHS) with an ultralow refractive index (n = 1.05) by using a templating method. Their refractive indices could be easily controlled from 1.05 to 1.08 by tuning the thickness of shell. In addition, a droplet coatings method is proposed for SPHS colloidal crystal (CC) by controlling the temperature and humidity. The SPHS CCs displayed distinct structural colors when the incident angle was adjusted and demonstrated high angular resolution. Moreover, the iridescent color changes could be observed with the naked eye. For surface-enhanced Raman scattering application, more analyte could be absorbed by the porous shells, and metal nanoparticles were coated on the SPHSs surface to increase the hot spot density for improving the SERS intensity.

Dual-Colored Janus Microspheres with Photonic and Plasmonic Faces

Photonic and plasmonic colors, stemming from nanostructures of dielectric materials and metals, are promising for pigment-free coloration. In particular, nanostructures with structural colors have been employed in stimuli-responsive Janus microparticles to provide active color pixels. Here, the authors report a simple strategy to produce electro-responsive Janus microspheres composed of photonic and plasmonic faces for active color change. The photonic microspheres are first prepared by self-assembly of silica particles in emulsion droplets of photocurable resin. The silica particles form 3D crystalline arrays in the interior and 2D hexagonal arrays on the interface. The emulsion droplets are photocured and the silica particles are selectively removed to make porous photonic microspheres with hexagonal arrays of dimples on the surface. Directional deposition of gold or aluminum on the photonic microsphere develops plasmonic color on the top hemisphere while maintaining photonic color on the bottom hemisphere. Moreover, the metal deposited on one side renders the Janus microspheres electro-responsive. Therefore, the photonic and plasmonic colors are switchable by the orientation control of the Janus microspheres with an external electric field. The photonic and plasmonic colors are independently adjustable by employing two different sizes of silica particles in core-shell emulsion drops.

Coloration in Supraparticles Assembled from Polyhedral Metal-Organic Framework Particles

Supraparticles are spherical colloidal crystals prepared by confined self‐assembly processes. A particularly appealing property of these microscale structures is the structural color arising from interference of light with their building blocks. Here, we assemble supraparticles with high structural order that exhibit coloration from uniform, polyhedral metal–organic framework (MOF) particles. We analyse the structural coloration as a function of the size of these anisotropic building blocks and their internal structure. We attribute the angle‐dependent coloration of the MOF supraparticles to the presence of ordered, onion‐like layers at the outermost regions. Surprisingly, even though different shapes of the MOF particles have different propensities to form these onion layers, all supraparticle dispersions show well‐visible macroscopic coloration, indicating that local ordering is sufficient to generate interference effects.

Electrocatalytic Reaction Induced Colloidal Accumulation: The Role of Dielectrophoresis

A surface-driven flow is generated during the electrocatalytic reaction of a platinum-gold bielectrode within hydrogen peroxide. This flow can be experimentally visualized and quantified using micrometer-sized particles that are transported by a flow field. Tracer particles, which possess an inherent surface charge, also interact with the induced electric field and exhibit a collective behavior at the surface of the electrodes where they accumulate. The underlying mechanism for the accumulation dynamics demonstrated by these catalytic pump systems has so far been lacking. In this work, the accumulation dynamics and kinetics were experimentally investigated. With use of numerical simulations, we demonstrate that the self-driven particle accumulation is controlled by a positive dielectrophoretic force, mediated by the reaction-induced electric and flow field. These results contribute to the fundamental knowledge on immobilized bimetallic systems.

Multifunctional Oxazolone Derivative as an Optical Amplifier, Generator, and Modulator

An optical control of many working optoelectronic systems (real-time sensors, optical modulators, light amplifiers, or phase retarders) giving efficient optical gain or remote signal modulation is currently included as scientifically and industrially interesting. In here, an oxazolone derivative as the multifunctional organic system is given in this contribution. The molecule possesses a stilbene group and an oxazolone heteroatomic ring, which implies effective refractive index manipulation and multimode lasing action, respectively. The light modulation is repeatable and stable, also in the hundreds of Hz regime. On the other hand, the amplified optical signal can be easily generated by an external optical pumping source. Thus, signal control is fully available, as is read-in and read-out of the information in real time. Furthermore, this third-order, nonlinear, optical phenomenon using a third harmonic generation technique was also observed. We discovered that only by changing the energy and time regime of the supplied optical signal is the optical or nonlinear optical response observed. Two heteroenergetic molecular states (trans (E) and cis (Z)) can efficiently operate in modern multifunctional optoelectronic systems, which can provide and generate an optical signal. Such functionalities are commonly used in all-optical photonic switchers and logic gates and can be utilized in optical-core networks and computers.

Polymer-based self-assembled photonic crystals to tune light transport and emission

The advent of photonic crystals has made possible the idea of controlling flows of light, which has revolutionized photonics-based technology. Photonic crystals are constructed based on periodic refractive index variations in one-, two-, or three-spatial dimensions on the optical-wavelength scale. Photonic crystals show inherent photonic stop gaps or band gaps depending upon the crystal symmetry and refractive index contrast. Showing ease of fabrication, polymer-based self-assembled photonic crystals with stop gaps have been widely explored. We discuss angle- and polarization-dependent stop gap creation and splitting at higher angles of incidence. The observed stop gaps in self-assembled photonic crystals often deviate from theoretical predictions due to experimental constraints, such as finite size and fabrication disorders associated with samples. We perform micro-reflectivity experiments on a single domain, showing minimal disorder, with nearly 100% reflectivity, which is in agreement with theory. We obtain more than 75% emission intensity suppression and a 30% increase in the emission lifetime at the stop gap using micro-emission experiments in a single domain. This enables us to study the role of finite-size effects in photonic crystals in modifying the emission properties. We observe the linear scaling of the emission intensity suppression and the emission rate with the finite size of the crystal. Our single-domain experimental studies reveal that the use of low index-contrast self-assembled photonic crystals is a potential platform for strategically modifying light transport and emission properties.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Dual photonic bandgap hollow sphere colloidal photonic crystals for real-time fluorescence enhancement in living cells

To overcome the problems of refractive index matching and increased disorder when working with traditional heterostructure colloidal photonic crystals (CPCs) with dual or multiple photonic bandgaps (PBGs) for fluorescence enhancement in water, we propose the use of a chemical heterostructure in hollow sphere CPCs (HSCPCs). A partial chemical modification of the HSCPC creates a large contrast in wettability to induce the heterostructure, while the hollow spheres increase the refractive index difference when used in aqueous environment. With the platform, fluorescence enhancement reaches around 160 times in solution, and 72 times (signal-to-background ratio ~7 times) in cells during proof-of-concept live cardiomyocyte contractility experiments. Such photonic platform can be further exploited for chemical sensing, bioassays, and environmental monitoring. Moreover, the introduction of chemical heterostructures provides new design principles for functionalized photonic devices.

Colloidal Photonic Crystals of Reusable Hydrogel Microparticles for Sensor and Laser Applications

Although a wide variety of techniques have been developed to date for the fabrication of high-quality colloidal photonic crystals (CPCs) using monodisperse silica and polystyrene microparticles, poly(N-isopropylacrylamide) (PNIPA) hydrogel microparticles have rarely been utilized for the preparation of active CPCs despite the intriguing feature of temperature-responsive volume changes. This report describes the promising potential abilities of PNIPA hydrogel microparticles for sensor and laser applications. Monodisperse PNIPA hydrogel microparticles were synthesized by emulsion polymerization, and the microparticle diameter was finely controlled by adjusting the surfactant concentration. Such hydrogel microparticles spontaneously formed uniform CPCs with visible Bragg reflection even in fluid suspensions. The addition of small amounts of ionic substances into the centrifuged and deionized CPC suspensions enabled the on-demand color switching between Bragg reflection and white turbidity with temperature, leading to temperature- and ion-sensing applications. Moreover, our expanding experiments successfully demonstrated the optically excited laser action with a single and narrow peak from CPC suspensions with light-emitting dyes by the photonic band gap effect. After the light-emitting dyes were simply removed from the CPC suspensions by centrifugation, the purified PNIPA hydrogel microparticles were permanently reusable as the CPC laser microcavities to generate the laser action at other wavelengths using different dyes. This study contributes the circular economy concept using reusable hydrogel microparticles for the realization of a sustainable society.

Formation of β-Lactoglobulin Self-Assemblies via Liquid-Liquid Phase Separation for Applications beyond the Biological Functions

Proteins are like miracle machines, playing important roles in living organisms. They perform vital biofunctions by further combining together and/or with other biomacromolecules to form assemblies or condensates such as membraneless organelles. Therefore, studying the self-assembly of biomacromolecules is of fundamental importance. In addition to their biological activities, protein assemblies also exhibit extra properties that enable them to achieve applications beyond their original functions. Herein, this study showed that in the presence of monosaccharides, ethylene glycols, and amino acids, β-lactoglobulin (β-LG) can form assemblies with specific structures, which were highly reproducible. The mechanism of the assembly process was studied through multi-scale observations and theoretical analysis, and it was found that the assembling all started from the formation of solute-rich liquid droplets via liquid-liquid phase separation (LLPS). These droplets then combined together to form condensates with elaborate structures, and the condensates finally evolved to form assemblies with various morphologies. Such a mechanism of the assembly is valuable for studying the assembly processes that frequently occur in living organisms. Detailed studies concerning the properties and applications of the obtained β-LG assemblies showed that the assemblies exhibited significantly better performances than the protein itself in terms of autofluorescence, antioxidant activity, and metal ion absorption, which indicates broad applications of these assemblies in bioimaging, biodetection, biodiagnosis, health maintenance, and pollution treatment. This study revealed that biomacromolecules, especially proteins, can be assembled via LLPS, and some unexpected application potentials could be found beyond their original biological functions.

Surface-enhanced Raman scattering in ETPTA inverse photonic crystals with gold nanoparticles

We present a substrate design for surface-enhanced Raman scattering by decorating three-dimensional inverse photonic crystals with a small amount of Au nanoparticles. Photonic crystals with different positions of the photonic stop band were fabricated by inverting opal-type templates using photopolymerization of a trimethylolpropane ethoxylate triacrylate (ETPTA) photocurable resin. Then Au nanoparticles were embedded into inverse ETPTA films by multiple infiltration. Using the methylene blue dye as a test compound, we found that the enhancement factor of the Raman signal is strongly dependent on the spectral position of the photonic stop band, reaching a value of about 1-2 × 10⁵ when it coincides with the laser wavelength. The detection limit for methylene blue in solution is of the order of 10^-7 M.

Photonic Particles Made by the Confined Self-Assembly of a Supramolecular Comb-Like Block Copolymer

Approaches that enable the preparation of robust polymeric photonic particles are of interest for the development of nonfading and highly reflective pigments for applications such as paints and display technologies. Here, the preparation of photonic particles that display structural color in both, aqueous suspension and the dry solid state is reported. This is achieved by exploiting the confined self-assembly of a supramolecular comb-like block copolymer (BCP) that microphase separates into a well-ordered lamellar morphology with dimensions that promote a photonic bandgap in the visible range. The comb-like BCP is formed by robust ionic interactions between poly(styrene-b-4-vinyl-pyridine) (PS-b-P4VP) BCP and dodecylbenzene sulfonic acid (DBSA), which selectively interacts with P4VP blocks. The components are combined in chloroform, and an aqueous emulsion is prepared. Evaporation of the organic solvent leads to the formation of solid microparticles with an onion-like 3D morphology. These photonic pigments display brilliant colors with reflectance spectra featuring pronounced optical bandgaps across the entire visible wavelength range with a peak reflectivity of 80-90%.

Reflectance Confocal Microscopy: A Powerful Tool for Large Scale Characterization of Ordered/Disordered Morphology in Colloidal Photonic Structures

The development of appropriate methods to correlate the structure and optical properties of colloidal photonic structures is still a challenge. Structural information is mostly obtained by electron, X-ray, or optical microscopy methods and X-ray diffraction, while bulk spectroscopic methods and low resolution bright-field microscopy are used for optical characterization. Here, we describe the use of reflectance confocal microscopy as a simple and intuitive technique to provide a direct correlation between the ordered/disordered structural morphology of colloidal crystals and glasses, and their corresponding optical properties.