Self-organized liquid-crystalline nanostructured membranes for water treatment: selective permeation of ions

Design of V-shaped ionic liquid crystals: atropisomerisation ability and formation of double-gyroid molecular assemblies

We designed V-shaped ionic liquid crystals with two sterically congested ionic parts at the vertex. Depending on the degree of steric hindrance, atropisomerisation occurred in solution. All compounds formed bicontinuous cubic phases with double-gyroid structures in the bulk state, partially owing to the co-existence of atropisomers with opposite chirality.

Pronounced Cold Crystallization and Hydrogen Bonding Distortion of Water Confined in Microphases of Double Zwitterionic Block Copolymer Aqueous Solutions

Advanced materials leveraging water control are garnering considerable interest, with the state of water emerging as a critical aspect of material design. This study explored the impact of microphase separation on water using aqueous solutions of double zwitterionic diblock copolymers, specifically poly(carboxybetaine methacrylate) and poly(sulfobetaine methacrylate) (PCB2-b-PSB4). These copolymers form a mesoscale periodic ordered lattice structure consisting of two distinct aqueous phases. Through differential scanning calorimetry and X-ray emission spectroscopy, it was found that water in these PCB2-b-PSB4 aqueous solutions exhibits pronounced cold crystallization and subtle distortions in hydrogen-bonding configurations.

Universal Access to Water-Compatible and Nanostructured Materials via the Self-Assembly of Cationic Alternating Copolymers

Herein, we report the water-assisted self-assembly of alternating copolymers bearing imidazolium cations and hydrophobic groups to create water-compatible and nanostructured materials. The copolymers efficiently absorbed water into the cationic segments from the outer environments, depending on the relative humidity. The absorbed water serves as hydrophilic molecules to modulate the weight fraction of hydrophilic/hydrophobic units in the samples. Thus, the morphologies and domain spacing of the nanostructures can be controlled by not only the side chains, but also the amount of absorbed water. The self-assembly of the cationic copolymers, developed herein, afforded universal access to various morphologies, including lamella, gyroid, and cylinder, in addition to the precision control of the domain spacing at the 0.01 nm level.

Electrochemical Detection of Selective Anion Transport through Subnanopores in Liquid-Crystalline Water Treatment Membranes

The anion-selective transport through subnanoporous liquid-crystalline (LC) water treatment membranes was quantitatively detected by the deposition and electrochemical analysis of the LC membrane on the GaN electrode. The time course of the capacitance and Warburg resistance of the LC membrane suggest that the interaction of the LC membrane with monovalent Cl- ions is distinctly different from that with SO42- ions. A continuous decay in capacitance suggests the condensation of Cl- ions in subnanopores, whereas the interaction between SO42- ions and the inner wall of subnanopores is much weaker. The chronoamperometry data further suggest that SO42- ions are transported through subnanoporous channels 10 times faster than Cl- ions. These results, together with the previous X-ray emission spectroscopy, suggest that SO42- ions, which possess similar hydrogen-bonded structures to the hydrogen-bonded networks inside the subnanopores, can exchange the associated water molecules and hop along the network of water molecules, but Cl- ions bind and accumulate inside subnanopores. The well-controlled supramolecular self-assembly of LC building blocks opens a large potential toward the fine adjustment of hydrogen-bonding networks in nanospace providing materials new functions, which cannot be realized by bulk water.

Lamellar Microphase Separation and Phase Transition of Hydrogen-Bonding/Crystalline Statistical Copolymers: Amide Functionalization at the Interface

Microphase separation of random copolymers, as well as that of high χ-low N block copolymers, is promising to construct sub-10-nm structures into materials. Herein, we designed statistical copolymers consisting of 2-hydroxyethyl acrylate (HEA) and N-octadecylacrylamide (ODAAm) to produce crystallization and hydrogen bond-assisted lamellar structure materials. The copolymers not only formed a crystalline lamellar structure with 3-4 nm domain spacing but also maintained an amorphous lamellar structure via phase transition above the melting temperature up to approximately 100 °C. The key is to introduce hydrogen-bonding amide junctions between the octadecyl groups and the polymer backbones, by which the polymer chains are physically fixed at the interface of lamellar structures even above the melting temperature. The stabilization of the lamellar structure by the amide units is also supported by the fact that the lamellar structure of all-acrylate random copolymers bearing hydroxyethyl and crystalline octadecyl groups is disordered above the melting temperature. By spin-coating on a silicon substrate, the HEA/ODAAm copolymer formed a multilayered lamellar thin film consisting of a hydrophilic hydroxyethyl/main chain phase and a hydrophobic octadecyl phase. The structure and order-disorder transition were analyzed by neutron reflectivity.

Aquatic Functional Liquid Crystals: Design, Functionalization, and Molecular Simulation

Aquatic functional liquid crystals, which are ordered molecular assemblies that work in water environment, are described in this review. Aquatic functional liquid crystals are liquid-crystalline (LC) materials interacting water molecules or aquatic environment. They include aquatic lyotropic liquid crystals and LC based materials that have aquatic interfaces, for example, nanoporous water treatment membranes that are solids preserving LC order. They can remove ions and viruses with nano- and subnano-porous structures. Columnar, smectic, bicontinuous LC structures are used for fabrication of these 1D, 2D, 3D materials. Design and functionalization of aquatic LC sensors based on aqueous/LC interfaces are also described. The ordering transitions of liquid crystals induced by molecular recognition at the aqueous interfaces provide distinct optical responses. Molecular orientation and dynamic behavior of these aquatic functional LC materials are studied by molecular dynamics simulations. The molecular interactions of LC materials and water are key of these investigations. New insights into aquatic functional LC materials contribute to the fields of environment, healthcare, and biotechnology.

Hydrogen-Bonded Structures of Water Molecules in Hydroxy-Functionalized Nanochannels of Columnar Liquid Crystalline Nanostructured Membranes Studied by Soft X-ray Emission Spectroscopy

Here, we report a synchrotron-based high-resolution soft X-ray emission spectroscopy study on hydrogen-bonded structures of water molecules in the self-organized, hydroxy-group-functionalized one-dimensional nanochannels of liquid crystalline nanostructured membranes. The water molecules confined in the uncharged hydroxy-functionalized nanochannels (which have a diameter of about 1.5 nm) exhibit hydrogen-bonded structures close to those of bulk liquid water, even directly interacting with diol groups. These hydrogen-bonded structures contrast with the more distorted hydrogen bonding of water molecules confined in self-organized channels with a diameter of 0.6 nm formed by an analogous nanostructured membrane with a cationic moiety, which was explained by the ability of the channel functional groups to donate and accept hydrogen bonds in a confined space and the nanochannel diameter.

Photo-responsive nanoporous liquid crystal polymer films for selective dye adsorption

Photo-responsive nanoporous polymer films (AZOF-R(NC6)) have been developed by a template method based on a hydrogen-bonding supramolecular liquid crystal (LC) and a light-sensitive azobenzene LC crosslinker in this work. Anionic nanopores were obtained after the removal of template NC6 using KOH solution. The AZOF-R(NC6) demonstrates charge-selective dye adsorption and the maximum adsorption capacity for Rh6G is 504.6 mg g-1. The AZOF-R(NC6) film without UV light treatment shows a 32% higher adsorption capacity for Rh6G than the AZOF-R(NC6) film treated with UV light within the initial 10 min. In addition, UV light can trigger the release of the adsorbed dye from the polymer film due to the pore size change arising from the trans-cis isomerization. Besides, the used polymer film can be effectively regenerated using a HCl solution. Such functional polymer films with highly ordered nanopores and photo-responsive properties hold great promise in selective adsorption and mass separations.

Nanofiltration Performance of Poly(p-xylylene) Nanofilms with Imidazole Side Chains

Herein, we report the nanofiltration performance of poly(p-xylylene) thin films with imidazole side chains that were deposited onto commercial polyethersulfone ultrafiltration membranes using a chemical vapor deposition process. The resulting thin films with a few tens of nanometers exhibited water permeation under a pressure difference of 0.5 MPa and selectively rejected water-soluble organic dyes based on their molecular sizes. Additionally, thin flaky ZIF-L crystals (Zn(mim)2·(Hmim)1/2·(H2O)3/2) (Hmim = 2-methylimidazole) formed on the surface of imidazole-containing poly(p-xylylene) films, and the composite films demonstrated the ability to adsorb methylene blue molecules within the cavities of ZIF-L.

Does thermotropic liquid crystalline self-assembly control biological activity in amphiphilic amino acids? - tyrosine ILCs as a case study

Amphiphilic amino acids represent promising scaffolds for biologically active soft matter. In order to understand the bulk self-assembly of amphiphilic amino acids into thermotropic liquid crystalline phases and their biological properties a series of tyrosine ionic liquid crystals (ILCs) was synthesized, carrying a benzoate unit with 0-3 alkoxy chains at the tyrosine unit and a cationic guanidinium head group. Investigation of the mesomorphic properties by polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray diffraction (WAXS, SAXS) revealed smectic A bilayers (SmA_d) for ILCs with 4-alkoxy- and 3,4-dialkoxybenzoates, whereas ILCs with 3,4,5-trisalkoxybenzoates showed hexagonal columnar mesophases (Col_h), while different counterions had only a minor influence. Dielectric measurements revealed a slightly higher dipole moment of non-mesomorphic tyrosine-benzoates as compared to their mesomorphic counterparts. The absence of lipophilic side chains on the benzoate unit was important for the biological activity. Thus, non-mesomorphic tyrosine benzoates and crown ether benzoates devoid of additional side chains at the benzoate unit displayed the highest cytotoxicities (against L929 mouse fibroblast cell line) and antimicrobial activity (against Escherichia coli ΔTolC and Staphylococcus aureus) and promising selectivity ratio in favour of antimicrobial activity.

Lyotropic Liquid Crystal (LLC)-Templated Nanofiltration Membranes by Precisely Administering LLC/Substrate Interfacial Structure

Mesoporous materials based on lyotropic liquid crystal templates with precisely defined and flexible nanostructures offer an alluring solution to the age-old challenge of water scarcity. In contrast, polyamide (PA)-based thin-film composite (TFC) membranes have long been hailed as the state of the art in desalination. They grapple with a common trade-off between permeability and selectivity. However, the tides are turning as these novel materials, with pore sizes ranging from 0.2 to 5 nm, take center stage as highly coveted active layers in TFC membranes. With the ability to regulate water transport and influence the formation of the active layer, the middle porous substrate of TFC membranes becomes an essential player in unlocking their true potential. This review delves deep into the recent advancements in fabricating active layers using lyotropic liquid crystal templates on porous substrates. It meticulously analyzes the retention of the liquid crystal phase structure, explores the membrane fabrication processes, and evaluates the water filtration performance. Additionally, it presents an exhaustive comparison between the effects of substrates on both polyamide and lyotropic liquid crystal template top layer-based TFC membranes, covering crucial aspects such as surface pore structures, hydrophilicity, and heterogeneity. To push the boundaries even further, the review explores a diverse array of promising strategies for surface modification and interlayer introduction, all aimed at achieving an ideal substrate surface design. Moreover, it delves into the realm of cutting-edge techniques for detecting and unraveling the intricate interfacial structures between the lyotropic liquid crystal and the substrate. This review is a passport to unravel the enigmatic world of lyotropic liquid crystal-templated TFC membranes and their transformative role in global water challenges.

Multiple Routes to Bicontinuous Cubic Liquid Crystal Phases Discovered by High-Throughput Self-Assembly Screening of Multi-Tail Lipidoids

Bicontinuous cubic phases offer advantageous routes to a broad range of applied materials ranging from drug delivery devices to membranes. However, a priori design of molecules that assemble into these phases remains a technological challenge. In this article, a high-throughput synthesis of lipidoids that undergo protonation-driven self-assembly (PrSA) into liquid crystalline (LC) phases is conducted. With this screening approach, 12 different multi-tail lipidoid structures capable of assembling into the bicontinuous double gyroid phase are discovered. The large volume of small-angle X-ray scattering (SAXS) data uncovers unexpected design criteria that enable phase selection as a function of lipidoid headgroup size and architecture, tail length and architecture, and counterion identity. Surprisingly, combining branched headgroups with bulky tails forces lipidoids to adopt unconventional pseudo-disc conformations that pack into double gyroid networks, entirely distinct from other synthetic or biological amphiphiles within bicontinuous cubic phases. From a multitude of possible applications, two examples of functional materials from lipidoid liquid crystals are demonstrated. First, the fabrication of gyroid nanostructured films by interfacial PrSA, which are rapidly responsive to the external medium. Second, it is shown that colloidally-dispersed lipidoid cubosomes, for example, for drug delivery, are easily assembled using top-down solvent evaporation methods.

Towards Nematic Phases in Ionic Liquid Crystals - A Simulation Study

Ionic liquid crystals (ILCs) are soft matter materials with broad liquid crystalline phases and intrinsic electric conductivity. They typically consist of a rod-shaped mesogenic ion and a smaller spherical counter-ion. Their mesomorphic properties can be easily tuned by exchanging the counter ion. ILCs show a strong tendency to form smectic A phases due to the segregation of ionic and the non-ionic molecular segments. Nematic phases are therefore extremely rare in ILCs and the question of why nematic phases are so exceptional in existing ILCs, and how nematic ILCs might be obtained in the future is of vital interest for both the fundamental understanding and the potential applications of ILCs. Here, we present the result of a simulation study, which highlights the crucial role of the location of the ionic charge on the rod-like mesogenic ions in the phase behaviour of ILCs. We find that shifting the charge from the ends towards the centre of the mesogenic ion destabilizes the liquid crystalline state and induces a change from smectic A to nematic phases.

From Materials to Devices: Rationally Designing Solar Steam System for Advanced Applications

Solar-driven water vaporization for freshwater production attracts significant interest due to its potential for solving global water scarcity problems. In this review, the recent development of management strategies via diverse rational designs in terms of light, thermal, water, and anti-salt fouling for enhancement of overall vaporization efficiency, is summarized. For device design, a host-guest concept is raised for clearly elaborating the detailed function and interaction between the solar-thermal material and the substrates. In addition, the rising technologies derived from solar vaporization, such as energy generation, photocatalysis, dehumidification, salt harvesting, sterilization, and biofuel production, are also highlighted. This review provides a new horizon toward the development of solar technologies and practical applications.

Tuning the Gas Separation Performances of Smectic Liquid Crystalline Polymer Membranes by Molecular Engineering

The effect of layer spacing and halogenation on the gas separation performances of free-standing smectic LC polymer membranes is being investigated by molecular engineering. LC membranes with various layer spacings and halogenated LCs were fabricated while having a planar aligned smectic morphology. Single permeation and sorption data show a correlation between gas diffusion and layer spacing, which results in increasing gas permeabilities with increasing layer spacing while the ideal gas selectivity of He over CO₂ or He over N₂ decreases. The calculated diffusion coefficients show a 6-fold increase when going from membranes with a layer spacing of 31.9 Å to membranes with a layer spacing of 45.2 Å, demonstrating that the layer spacing in smectic LC membranes mainly affects the diffusion of gasses rather than their solubility. A comparison of gas sorption and permeation performances of smectic LC membranes with and without halogenated LCs shows only a limited effect of LC halogenation by a slight increase in both solubility and diffusion coefficients for the membranes with halogenated LCs, resulting in a slightly higher gas permeation and increased ideal gas selectivities towards CO₂. These results show that layer spacing plays an important role in the gas separation performances of smectic LC polymer membranes.

Nonpolarizable Force Fields through the Self-Consistent Modeling Scheme with MD and DFT Methods: From Ionic Liquids to Self-Assembled Ionic Liquid Crystals

A key to achieve the accuracy of molecular dynamics (MD) simulation is the set of force fields used to express the atomistic interactions. In particular, the electrostatic interaction remains the main issue for the precise simulation of various ionic soft materials from ionic liquids to their supramolecular compounds. In this study, we test the nonpolarizable force fields of ionic liquids (ILs) and self-assembled ionic liquid crystals (ILCs) for which the intermolecular charge transfer and intramolecular polarization are significant. The self-consistent modeling scheme is adopted to refine the atomic charges of ionic species in a condensed state through the use of density functional theory (DFT) under the periodic boundary condition. The atomic charges of the generalized amber force field (GAFF) are effectively updated to express the electrostatic properties of ionic molecules obtained by the DFT calculation in condensed phase, which improves the prediction accuracy of ionic conductivity with the obtained force field (GAFF-DFT). The derived DFT charges then suggest that the substitution of a hydrophobic liquid-crystalline moiety into IL-based cations enhances the charge localization of ionic groups in the amphiphilic molecules, leading to the amplification of the electrostatic interactions among the hydrophilic/ionic groups in the presence of hydrophobic moieties. In addition, we focus on an ion-conductive pathway hidden in the self-assembled nanostructure. The MD results indicate that the ionic groups of cation and anion interact strongly for keeping the bicontinuous nanosegregation of ionic nanochannel. The partial fractions of hydrophilic/ionic and hydrophobic nanodomains are then quantified with the volume difference from referenced IL systems, while the calculated ionic conductivity decreases in the self-assembled ILCs more than the occupied volume of ionic nanodomains. These analyses suggest that the mobility of ions in the self-assembled ILCs remains quite restricted even with small tetrafluoroborate anions because of strong attractive interaction among ionic moieties.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

A cholesterol benzoate RRS probe for the determination of trace ammonium ions

The measurement of NH₄⁺ has attracted considerable attention with the increase of NH₄⁺ emissions in sewage caused by human activities. So far, a variety of photometric and fluorescence methods for the detection of NH₄⁺ have been researched and summarized, but there is no report about the use of liquid crystals (LCs) cholesteryl benzoate (CB) as a resonance Rayleigh scattering (RRS) probe to determine ammonium ions. In the NaAc-HAc buffer solution with pH = 4.80, the yellow compounds 3,5 diacetyl-1,4 dihydrolutidine (DDL) generated by the reaction of NH₄⁺ with acetylacetone (AT) and formaldehyde (HCHO) act as the energy receiver and CB as the donor. Because the RRS spectrum of CB overlaps with the DDL absorption spectrum, resonance Rayleigh scattering energy transfer (RRS-ET) occurs. When the NH₄⁺ concentration increased, the generated DDL increased, and the RRS-ET also increased, so the RRS intensity of the system at 395 nm decreased. For this reason, a fast and sensitive CB RRS-ET method was established to apply to the detection of NH₄⁺ in water. The detection range was 1.00 × 10^-3 - 4.66 μg/mL, and the detection limit was 6.62 × 10^-3 μg/mL. Using this method to analyze and detect NH₄⁺ in environmental water samples, the precision and recovery rate were between 1.30-9.30% and 95.5-109.9%, respectively. Therefore, this method has the advantages of sensitivity and simplicity.

Angstrom-scale ion channels towards single-ion selectivity

Artificial ion channels with ion permeability and selectivity comparable to their biological counterparts are highly desired for efficient separation, biosensing, and energy conversion technologies. In the past two decades, both nanoscale and sub-nanoscale ion channels have been successfully fabricated to mimic biological ion channels. Although nanoscale ion channels have achieved intelligent gating and rectification properties, they cannot realize high ion selectivity, especially single-ion selectivity. Artificial angstrom-sized ion channels with narrow pore sizes <1 nm and well-defined pore structures mimicking biological channels have accomplished high ion conductivity and single-ion selectivity. This review comprehensively summarizes the research progress in the rational design and synthesis of artificial subnanometer-sized ion channels with zero-dimensional to three-dimensional pore structures. Then we discuss cation/anion, mono-/di-valent cation, mono-/di-valent anion, and single-ion selectivities of the synthetic ion channels and highlight their potential applications in high-efficiency ion separation, energy conversion, and biological therapeutics. The gaps of single-ion selectivity between artificial and natural channels and the connections between ion selectivity and permeability of synthetic ion channels are covered. Finally, the challenges that need to be addressed in this research field and the perspective of angstrom-scale ion channels are discussed.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

On the Order and Orientation in Liquid Crystalline Polymer Membranes for Gas Separation

To prevent greenhouse emissions into the atmosphere, separations like CO2/CH4 and CO2/N2 from natural gas, biogas, and flue gasses are crucial. Polymer membranes gained a key role in gas separations over the past decades, but these polymers are often not organized at a molecular level, which results in a trade-off between permeability and selectivity. In this work, the effect of molecular order and orientation in liquid crystals (LCs) polymer membranes for gas permeation is demonstrated. Using the self-assembly of polymerizable LCs to prepare membranes ensures control over the supramolecular organization and alignment of the building blocks at a molecular level. Robust freestanding LC membranes were fabricated that have various, distinct morphologies (isotropic, nematic cybotactic, and smectic C) and alignment (planar and homeotropic), while using the same chemical composition. Single gas permeation data show that the permeability decreases with increasing molecular order while the ideal gas selectivity of He and CO2 over N2 increases tremendously (36-fold for He/N2 and 21-fold for CO2/N2) when going from randomly ordered to the highly ordered smectic C morphology. The calculated diffusion coefficients showed a 10-fold decrease when going from randomly ordered membranes to ordered smectic C membranes. It is proposed that with increasing molecular order, the free volume elements in the membrane become smaller, which hinders gasses with larger kinetic diameters (Ar, N2) more than gasses with smaller kinetic diameters (He, CO2), inducing selectivity. Comparison of gas sorption and permeation performances of planar and homeotropic aligned smectic C membranes shows the effect of molecular orientation by a 3-fold decrease of the diffusion coefficient of homeotropic aligned smectic C membranes resulting in a diminished gas permeation and increased ideal gas selectivities. These results strongly highlight the importance of molecular order and orientation in LC polymer membranes for gas separation.

Membrane Materials for Selective Ion Separations at the Water-Energy Nexus

Synthetic polymer membranes are enabling components in key technologies at the water-energy nexus, including desalination and energy conversion, because of their high water/salt selectivity or ionic conductivity. However, many applications at the water-energy nexus require ion selectivity, or separation of specific ionic species from other similar species. Here, the ion selectivity of conventional polymeric membrane materials is assessed and recent progress in enhancing selective transport via tailored free volume elements and ion-membrane interactions is described. In view of the limitations of polymeric membranes, three material classes-porous crystalline materials, 2D materials, and discrete biomimetic channels-are highlighted as possible candidates for ion-selective membranes owing to their molecular-level control over physical and chemical properties. Lastly, research directions and critical challenges for developing bioinspired membranes with molecular recognition are provided.

Molecular insights on confined water in the nanochannels of self-assembled ionic liquid crystal

Self-assembled ionic liquid crystals can transport water and ions via the periodic nanochannels, and these materials are promising candidates as water treatment membranes. Molecular insights on the water transport process are, however, less investigated because of computational difficulties of ionic soft matters and the self-assembly. Here we report specific behavior of water molecules in the nanochannels by using the self-consistent modeling combining density functional theory and molecular dynamics and the large-scale molecular dynamics calculation. The simulations clearly provide the one-dimensional (1D) and 3D-interconnected nanochannels of self-assembled columnar and bicontinuous structures, respectively, with the precise mesoscale order observed by x-ray diffraction measurement. Water molecules are then confined inside the nanochannels with the formation of hydrogen bonding network. The quantitative analyses of free energetics and anisotropic diffusivity reveal that, the mesoscale geometry of 1D nanodomain profits the nature of water transport via advantages of dissolution and diffusion mechanisms inside the ionic nanochannels.

Tailoring CO2-Activated Ion Nanochannels Using Macrocyclic Pillararenes

Gas-responsive nanochannels have great relevance for applications in many fields. Inspired by CO₂-sensitive ion channels, herein we present an approach for designing solid-state nanochannels that allow controlled regulation of ion transport in response to alternate CO₂/N₂ stimuli. The pillar[5]arene (P5N) bearing diethylamine groups can convert into the water-soluble host P5C, containing cationic tertiary ammonium salt groups after absorbing CO₂. Subsequently, the nanochannel walls are tailored using P5N-based host-guest chemistry. The ion transport rate of K⁺ in the P5N nanochannels under CO₂ was 1.66 × 10^-4 mol h^-1 m^-2, whereas that under N₂ was 7.98 × 10^-4 mol h^-1 m^-2. Notably, there was no significant change to the ion current after eight cycles, which may indicate the stability and repeatability of CO₂-activated ion nanochannels. It is speculated that the difference in ion conductance resulted from the change in wettability and surface charge within the nanochannels in response to the gas stimuli. Achieving CO₂-activated ion transport in solid-state nanochannels opens new avenues for biomimetic nanopore systems and advanced separation processes.

Effect of Dendritic Side Groups on the Mobility of Modified Poly(epichlorohydrin) Copolymers

The macromolecular dynamics of dendronized copolymer membranes (PECHs), obtained by chemical modification of poly(epichlorohydrin) with the dendron 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy] benzoate, was investigated. In response to a thermal treatment during membrane preparation, these copolymers show an ability to change their shape, achieve orientation, and slightly crystallize, which was also observed by CP-MAS NMR, XRD, and DSC. The phenomenon was deeply analyzed by dielectric thermal analysis. The dielectric spectra show the influence of several factors such as the number of dendritic side groups, the orientation, their self-assembling dendrons, and the molecular mobility. The dielectric spectra present a sub-Tg dielectric relaxation, labelled as γ, associated with the mobility of the benzyloxy substituent of the dendritic group. This mobility is not related to the percentage of these lateral chains but is somewhat hindered by the orientation of the dendritic groups. Unlike other less complex polymers, the crystallization was dismantled before the appearance of the glass transition (α_Tg). Only after that, clearing transition (α_Clear) can be observed. The PECHs were flexible and offered a high free volume, despite presenting a high degree of modifications. However, the molecular mobility is not independent in each phase and the self-assembling dendrons can be eventually fine-tuned according to the percentage of grafted groups.

Gemini Thermotropic Smectic Liquid Crystals for Two-Dimensional Nanostructured Water-Treatment Membranes

We have developed a two-dimensional (2D) liquid-crystalline (LC) nanostructured water-treatment membrane showing high virus rejection ability (over 99.99997% for bacteriophage Qβ) and improved water permeation. Polymerizable gemini amphiphiles have been designed and synthesized. They have H-shaped gemini-type structures of thermotropic smectic liquid crystals composed of cationic imidazolium moieties. One of the gemini amphiphiles shows a smectic A phase with an interdigitated bilayer structure. A cross-linked self-standing 2D nanostructured polymer film has been obtained by in situ photopolymerization of the gemini amphiphile in the smectic phase. The length of linkers in gemini amphiphiles affects the formation of LC phases. The 2D nanostructured membrane also showed selective salt rejection.

Smectic Liquid Crystalline Polymer Membranes with Aligned Nanopores in an Anisotropic Scaffold

Bottom-up methods for the fabrication of nanoporous polymer membranes have numerous advantages. However, it remains challenging to fabricate nanoporous membranes that are mechanically robust and have aligned pores, that is, with a low tortuosity. Here, a mechanically robust thin-film composite membrane was fabricated consisting of a two-dimensional (2D) porous smectic liquid crystalline polymer network inside an anisotropic, microporous polymer scaffold. The polymer scaffold allows for relatively straightforward planar alignment of the smectic liquid crystalline mixture, which consisted of a diacrylate cross-linker and a dimer forming benzoic acid-based monoacrylate. Polymerized samples displayed a smectic A (SmA) phase, which formed the eventual 2D porous channels after base treatment. The aligned 2D nanoporous membranes showed a high rejection of anionic solutes bigger than 322 g/mol. Cleaning and reusability of the system were demonstrated by intentionally fouling the porous channels with a cationic dye and subsequently cleaning the membrane with an acidic solution. After cleaning, the membrane properties were unaffected; this, combined with numerous pressurizing cycles, demonstrated reusability of the system.

Bacterial nanocellulose papers with high porosity for optimized permeance and rejection of nm-sized pollutants

Access to clean potable water is increasingly becoming a struggle for whole humankind, thus water treatment to remediate wastewater and fresh water sources is an important task. Pollutants in the nanoscale, such as viruses and macromolecules, are usually removed by means of membrane filtration processes, predominantly nanofiltration or ultrafiltration. Cellulose nanopapers, prepared from renewable resources and manufactured by papermaking, have recently been demonstrated to be versatile alternatives to polymer membranes in this domain. Unfortunately, so far nanopaper filters suffer from limited permeance and thus efficiency. We here present nanopapers made from bacterial cellulose dispersed in water or different types of low surface tension organic liquids (alcohol, ketone, ether) through a simple papermaking process. Nanopapers prepared from organic liquids (BC-org) exhibited 40 times higher permeance, caused by a lower paper density hence increased porosity, compared to conventional nanopapers produced from aqueous dispersions, ultimately enhancing the efficiency of bacterial cellulose nanopaper membranes. Despite their higher porosity, BC-org nanopapers still have pore sizes of 15-20 nm similar to BC nanopapers made from aqueous dispersions, thus enabling removal of contaminants the size of viruses by a size-exclusion mechanism at high permeance.

Ion Selectivity of Water Molecules in Subnanoporous Liquid-Crystalline Water-Treatment Membranes: A Structural Study of Hydrogen Bonding

We demonstrate hydrogen-bonded structures of water in self-organized subnanoporous water treatment membranes obtained using synchrotron-based high-resolution soft X-ray emission spectroscopy. The ion selectivity of these water treatment membranes is usually understood by the size compatibility of nanochannels in the membrane with the Stokes radius of hydrated ions, or by electrostatic interaction between charges inside the nanochannels and such ions. However, based on a comparison between the hydrogen-bonded structures of water molecules in the nanochannels of the water treatment membrane and those surrounding the ions, we propose a definite contribution of structural consistency among the associated hydrogen-bonded water molecules to the ion selectivity. Our observation delivers a novel concept to the design of water treatment membranes where water molecules in the nanochannel can be regarded as a part of the material that controls the ion selectivity.

Functional Ionic Liquid Crystals

Ionic liquid crystals have emerged as a new class of functional soft materials in the last two decades, and they exhibit synergistic characteristics of ionic liquids and liquid crystals such as macroscopic orientability, miscibility with various species, phase stability, nanostructural tunability, and polar nanochannel formation. Owing to these characteristics, the structures, properties, and functions of ionic liquid crystals have been a hot topic in materials chemistry, finding various applications including host frameworks for guest binding, separation membranes, ion-/proton-conducting membranes, reaction media, and optoelectronic materials. Although several excellent review articles of ionic liquid crystals have been published recently, they mainly focused on the fundamental aspects, structures, and specific properties of ionic liquid crystals, while these applications of ionic liquid crystals have not yet been discussed at one time. The aim of this feature article is to provide an overview of the applications of ionic liquid crystals in a comprehensive manner.

Lyotropic Liquid Crystal-Based Membranes for Water Remediation: Fabrication, Characterization and Performance Evaluation

In water remediation, biomimetic membranes are gaining much attention due to their selectivity, dynamic stability, nontoxicity, and biocompatibility. Lyotropic liquid crystals (LLCs) are self-organizing networks that can conform to an array of geometries with high pore densities. As such, LLCs are excellent membrane materials for water applications because they are water insoluble and are manipulated to conform to an array of morphologies that provide natural water channels that are readily tunable in size. They have the ability to create uniform pores, between the range of 1 and 5 nm, with large surface areas. Thus, this work focuses on the design, fabrication, and characterization of LLC-modified Janus-type membranes for forward osmosis applications. Physical characterization of the membranes was performed using scanning electron microscopy (SEM), and the results show an open-pore radius and the presence of both finger- and sponge-like pores depending on membrane preparation. The contact angle assessment indicates that as the membranes are further modified with other polymers (e.g., PAN), higher hydrophilicity and surface energy are achieved. Moreover, the Brunauer-Emmett-Teller (BET) analysis showed a significant variation in the pore distribution between membranes. Functionalized membranes presented satisfactory water flux and superior salt rejection compared to nonfunctionalized membranes. SupPACMoDS membranes are 83% more efficient at preventing salt back flux than the nonmodified version. This is credited to the thickness and pore structure provided by the PAN support layer in the membrane.

High Virus Removal by Self-Organized Nanostructured 2D Liquid-Crystalline Smectic Membranes for Water Treatment

To obtain high quality of drinking water free from biocontaminants is especially important issue. A new strategy employing smectic liquid-crystalline ionic membranes exhibiting 2D structures of layered nanochannels for water treatment is proposed for efficient virus removal and sufficient water flux. The smectic A (SmA) liquid-crystalline membranes obtained by in situ polymerization of an ionic mesogenic monomer are examined for removal of three distinct viruses with small size: Qβ bacteriophage, MS2 bacteriophage, and Aichi virus. The semi-bilayer structure of the SmA significantly obstructs the virus penetration with an average log reduction value of 7.3 log₁₀ or the equivalent of reducing 18 million viruses down to 1. Furthermore, the layered nanochannels of the SmA liquid crystal allow efficient water permeation compared to other types of liquid-crystalline membrane consisting of nanopores.

Double-Gyroid Nanostructure Formation by Aggregation-Induced Atropisomerization and Co-Assembly of Ionic Liquid-Crystalline Amphiphiles

We report a new molecular‐design principle for creating double‐gyroid nanostructured molecular assemblies based on atropisomerization. Ionic amphiphiles containing two imidazolium rings close to each other were designed and synthesized. NMR data revealed that the rotation of the imidazolium rings is restricted, with an activation energy as high as 63 kJ mol⁻¹ in DMSO‐d₆ solution (DFT prediction for a model compound in the vacuum: 90–100 kJ mol⁻¹). Due to the restricted rotation, the amphiphiles feature “double” atropisomeric axes in their ionic segments and form three stable atropisomers: meso, R, and S. These isomers co‐organize into Ia3‾d ‐type bicontinuous cubic liquid‐crystalline mesophases through nanosegregation of the ionic and non‐ionic parts. Considering the intrinsic characteristic of Ia3‾d ‐type bicontinuous cubic structures that they are composed of intertwined right‐ and left‐handed single gyroids, we propose that the simultaneous presence of both R‐ and S‐atropisomers is an important contributor to the formation of double‐gyroid structures.

Regulate the Stability of Gyroids of ABC-Type Multiblock Copolymers by Controlling the Packing Frustration

We propose to regulate the stability of gyroids of ABC-type multiblock copolymers by controlling the packing frustration of majority-component B-blocks. Accordingly, we investigate the self-assembly behaviors of the BABCB linear terpolymer with a variable length ratio τ of the middle B-block relative to the total B-blocks using self-consistent field theory. It is observed that the gyroid region exhibits a maximal width with respect to τ, which is attributed by the nonmonotonical change of the packing frustration of three B-blocks in the morphology of discrete domains, for example, cylinders. Then we further purposely design another ABC-type copolymer composed of an ABC linear triblock tethered by another B-block at the middle of the B-block. In contrast, the packing frustration of B-blocks of the second terpolymer drops down continuously as the middle B-block shortens, thus, expanding the stable regions of cylinders and spheres while contracting those of lamella and gyroid.

Magnetic polymerizable surfactants: thermotropic liquid crystal behaviors and construction of nanostructured films

Two polymerizable surfactants, 3-undecylene-1-vinylimidazolium bromide (C11VIMBr) and 3-dodecyl-1-vinylimidazolium bromide (C12VIMBr), were chosen to prepare magnetic surfactant monomers by introducing Mn2+, Gd3+ and Ho3+.