25th anniversary article: interfacing nanoparticles and biology: new strategies for biomedicine

Motion of magnetic motors across liquid-liquid interface

HYPOTHESIS

In a number of applications related to chemical engineering and drug delivery, magnetic nanoparticles should move through a liquid-liquid interface in the presence of surfactant molecules. However, due to the action of capillary forces, this is not always possible. The mechanism of particle motion through the interface essentially depends on the intensity of the Marangoni flow, which is induced on the interface during its deformation.

EXPERIMENTS

In this paper we study the motion of nanoparticles Fe3O4 through the water-tridecane interface under the action of a nonuniform magnetic field when using different surfactants.

FINDINGS

If the linear size of the magnetic motor turns out to be less than a certain critical value, then it is not able to move between phases due to the action of capillary forces on the interface. Depending on the type and concentration of the surfactant used, various mechanisms for the motor motion through the liquid-liquid interface can be carried out. In one of them, a liquid phase is transferred through the interface along with a movable motor, while in the other, it is not.

Surface hydrolysis-designed AuNPs-zwitterionic-glucose as a novel tool for targeting macrophage visualization and delivery into infarcted hearts

Macrophages, innate immune cells, are key players in the maintenance of myocardial homeostasis under normal conditions and tissue repair after injury. The infiltration of macrophages into the injured heart makes them a potentially appealing vehicle for noninvasive imaging and targeted drug delivery of myocardial infarction (MI). In this study, we demonstrated the use of surface hydrolysis-designed AuNPs-zwitterionic-glucose to label macrophages and track their infiltration into isoproterenol hydrochloride (ISO)-induced MI sites noninvasively using CT. The AuNPs-zwitterionic-glucose did not affect the viability or cytokine release of macrophages and were highly taken up by these cells. The in vivo CT images were obtained on Day 4, Day 6, Day 7, and Day 9, and the attenuation was seen to increase in the heart over time compared to the Day 4 scan. In vitro analysis also confirmed the presence of macrophages around injured cardiomyocytes. Additionally, we also addressed the concern of cell tracking or merely AuNP tracking, which is the inherent problem for any form of nanoparticle-labeled cell tracking by using zwitterionic and glucose-functionalized AuNPs. The glucose coated on the surface of AuNPs-zwit-glucose will be hydrolyzed in macrophages, forming only zwitterionic protected AuNPs that cannot be taken up again by endogenous cells in vivo. This will greatly improve the accuracy and precision of imaging and target delivery. We believe this is the first study to noninvasively visualize the infiltration of macrophages into MI hearts using CT, which could be used for imaging and evaluating the possibility of macrophage-mediated delivery in infarcted hearts.

Application of Nanomaterials in Stem Cell-Based Therapeutics for Cardiac Repair and Regeneration

Cardiovascular disease is a leading cause of disability and death worldwide. Although the survival rate of patients with heart diseases can be improved with contemporary pharmacological treatments and surgical procedures, none of these therapies provide a significant improvement in cardiac repair and regeneration. Stem cell-based therapies are a promising approach for functional recovery of damaged myocardium. However, the available stem cells are difficult to differentiate into cardiomyocytes, which result in the extremely low transplantation efficiency. Nanomaterials are widely used to regulate the myocardial differentiation of stem cells, and play a very important role in cardiac tissue engineering. This study discusses the current status and limitations of stem cells and cell-derived exosomes/micro RNAs based cardiac therapy, describes the cardiac repair mechanism of nanomaterials, summarizes the recent advances in nanomaterials used in cardiac repair and regeneration, and evaluates the advantages and disadvantages of the relevant nanomaterials. Besides discussing the potential clinical applications of nanomaterials in cardiac therapy, the perspectives and challenges of nanomaterials used in stem cell-based cardiac repair and regeneration are also considered. Finally, new research directions in this field are proposed, and future research trends are highlighted.

Surface functionalization of inorganic nanoparticles with ligands: a necessary step for their utility

The importance of protecting inorganic nanoparticles with organic ligands and thus imparting the needed stabilization as colloidal dispersions for their potential applications is highlighted in this review.

Significance of Capping Agents of Colloidal Nanoparticles from the Perspective of Drug and Gene Delivery, Bioimaging, and Biosensing: An Insight

The over-growth and coagulation of nanoparticles is prevented using capping agents by the production of stearic effect that plays a pivotal role in stabilizing the interface. This strategy of coating the nanoparticles’ surface with capping agents is an emerging trend in assembling multipurpose nanoparticles that is beneficial for improving their physicochemical and biological behavior. The enhancement of reactivity and negligible toxicity is the outcome. In this review article, an attempt has been made to introduce the significance of different capping agents in the preparation of nanoparticles. Most importantly, we have highlighted the recent progress, existing roadblocks, and upcoming opportunities of using surface modified nanoparticles in nanomedicine from the drug and gene delivery, bioimaging, and biosensing perspectives.

The Effect of Capping Agents on Gold Nanostar Stability, Functionalization, and Colorimetric Biosensing Capability

Capping agents (organic ligands, polymers, and surfactants) are pivotal for stabilizing nanoparticles; however, they may influence the surface chemistry, as well as the physico-chemical and biological characteristics, of gold nanostar (AuNS)-based biosensors. In this study, we proved that various capping agents affected capped and bioconjugated AuNS stability, functionality, biocatalysis, and colorimetric readouts. Capped and bioconjugated AuNSs were applied as localized surface plasmon resonance (LSPR)-based H2O2 sensors using glucose oxidase (GOx) as a model enzyme. Furthermore, our analyses revealed that the choice of capping agent influenced the properties of the AuNSs, their stability, and their downstream applications. Our analyses provide new insights into factors governing the choice of capping agents for gold nanostars and their influences on downstream applications with conjugated enzymes in confined environments.

Liquid Crystal Nanoparticle Conjugates for Scavenging Reactive Oxygen Species in Live Cells

The elevated intracellular production of or extracellular exposure to reactive oxygen species (ROS) causes oxidative stress to cells, resulting in deleterious irreversible biomolecular reactions (e.g., lipid peroxidation) and disease progression. The use of low-molecular weight antioxidants, such as 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), as ROS scavengers fails to achieve the desired efficacy because of their poor or uncontrolled cellular uptake and off-target effects, such as dysfunction of essential redox homeostasis. In this study, we fabricated a liquid crystal nanoparticle (LCNP) conjugate system with the fluorescent dye perylene (PY) loaded in the interior and poly (ethylene glycol) (PEG) decorated on the surface along with multiple molecules of TEMPO (PY-LCNP-PEG/TEMPO). PY-LCNP-PEG/TEMPO exhibit enhanced cellular uptake, and efficient ROS-scavenging activity in live cells. On average, the 120 nm diameter PY-LCNPs were conjugated with >1800 molecules of TEMPO moieties on their surface. PY-LCNP-PEG/TEMPO showed significantly greater reduction in ROS activity and lipid peroxidation compared to free TEMPO when the cells were challenged with ROS generating agents, such as hydrogen peroxide (H2O2). We suggest that this is due to the increased local concentration of TEMPO molecules on the surface of the PY-LCNP-PEG/TEMPO NPs, which efficiently bind to the plasma membrane and enter cells. Overall, these results demonstrate the enhanced capability of TEMPO-conjugated LCNPs to protect live cells from oxidative stress by effectively scavenging ROS and reducing lipid peroxidation.

Designing Functional Bionanoconstructs for Effective In Vivo Targeting

The progress achieved over the last three decades in the field of bioconjugation has enabled the preparation of sophisticated nanomaterial–biomolecule conjugates, referred to herein as bionanoconstructs, for a multitude of applications including biosensing, diagnostics, and therapeutics. However, the development of bionanoconstructs for the active targeting of cells and cellular compartments, both in vitro and in vivo, is challenged by the lack of understanding of the mechanisms governing nanoscale recognition. In this review, we highlight fundamental obstacles in designing a successful bionanoconstruct, considering findings in the field of bionanointeractions. We argue that the biological recognition of bionanoconstructs is modulated not only by their molecular composition but also by the collective architecture presented upon their surface, and we discuss fundamental aspects of this surface architecture that are central to successful recognition, such as the mode of biomolecule conjugation and nanomaterial passivation. We also emphasize the need for thorough characterization of engineered bionanoconstructs and highlight the significance of population heterogeneity, which too presents a significant challenge in the interpretation of in vitro and in vivo results. Consideration of such issues together will better define the arena in which bioconjugation, in the future, will deliver functional and clinically relevant bionanoconstructs.

Mapping Surface Charge Distribution of Single-Cell via Charged Nanoparticle

Many bio-functions of cells can be regulated by their surface charge characteristics. Mapping surface charge density in a single cell's surface is vital to advance the understanding of cell behaviors. This article demonstrates a method of cell surface charge mapping via electrostatic cell-nanoparticle (NP) interactions. Fluorescent nanoparticles (NPs) were used as the marker to investigate single cells' surface charge distribution. The nanoparticles with opposite charges were electrostatically bonded to the cell surface; a stack of fluorescence distribution on a cell's surface at a series of vertical distances was imaged and analyzed. By establishing a relationship between fluorescent light intensity and number of nanoparticles, cells' surface charge distribution was quantified from the fluorescence distribution. Two types of cells, human umbilical vein endothelial cells (HUVECs) and HeLa cells, were tested. From the measured surface charge density of a group of single cells, the average zeta potentials of the two types of cells were obtained, which are in good agreement with the standard electrophoretic light scattering measurement. This method can be used for rapid surface charge mapping of single particles or cells, and can advance cell-surface-charge characterization applications in many biomedical fields.

Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles

Protein orientation in nanoparticle-protein conjugates plays a crucial role in binding to cell receptors and ultimately, defines their targeting efficiency. Therefore, understanding fundamental aspects of the role of protein orientation upon adsorption on the surface of nanoparticles (NPs) is vital for the development of clinically important protein-based nanomedicines. In this work, new insights on the effect of the different orientation of cytochrome c (cyt c) bound to gold nanoparticles (GNPs) using various ligands on its apoptotic activity is reported. Time-of-Flight Secondary-Ion Mass Spectrometry (ToF-SIMS), electrochemical and circular dichroism (CD) analyses are used to investigate the characteristics of cyt c orientation and structure on functionalized GNPs. These studies indicate that the orientation and position of the heme ring inside the cyt c structure can be altered by changing the surface chemistry on the GNPs. A difference in the apoptosis inducing capability because of different orientation of cyt c bound to the GNPs is observed. These findings indicate that the biological activity of a protein can be modulated on the surface of NPs by varying its adsorption orientation. This study will impact on the rational design of new nanoscale biosensors, bioelectronics, and nanoparticle-protein based drugs.

Delivery of drugs, proteins, and nucleic acids using inorganic nanoparticles

Inorganic nanoparticles provide multipurpose platforms for a broad range of delivery applications. Intrinsic nanoscopic properties provide access to unique magnetic and optical properties. Equally importantly, the structural and functional diversity of gold, silica, iron oxide, and lanthanide-based nanocarriers provide unrivalled control of nanostructural properties for effective transport of therapeutic cargos, overcoming biobarriers on the cellular and organismal level. Taken together, inorganic nanoparticles provide a key addition to the arsenal of delivery vectors for fighting disease and improving human health.

Mapping the supramolecular assembly space of poly(sarcosine)-b-poly(propylene sulfide) using a combinatorial copolymer library

A combinatorial copolymer library was created to rapidly screen the landscape of self-assembled nanostructure morphologies formed by block copolymers composed of hydrophilic peptoid polysarcosine (PSarc) and hydrophobic poly(propylene sulfide) (PPS) blocks. By probing rationally selected hydrophilic/hydrophobic copolymer weight fractions, the rapid and reproducible fabrication of micellar and vesicular nanostructures was optimized.

Size-dependent interaction of hydrophilic/hydrophobic ligand functionalized cationic and anionic nanoparticles with lipid bilayers

We study the nature of nanoparticle (NPs)-membrane interaction as a function of nanoparticle size for different functionalization using molecular dynamics simulation. Zinc sulphide quantum dots of size, 2 nm and 4 nm are used as model NPs, and DLPC and DPPC lipid bilayers are used as model membranes. We use coarse-grained polarizable MARTINI model (MPW) to simulate the NPs and lipid bilayers. Our simulation results show that uncharged bare NPs penetrate the lipid bilayers and embed themselves within the hydrophobic core of the bilayer both in the gel and fluid phases. NPs of size 4 nm are shown to disrupt the bilayer. The bilayer recovers from the damages caused by smaller NPs of size 2 nm. In case of either purely hydrophilic or hybrid (with hydrophilic/hydrophobic ratio of 2:1) ligand-functionalized NPs of smaller size (shell size 2 nm), only cationic NPs bind to the bilayer. However, for larger NPs with a shell size of 4 nm, both anionic and cationic hybrid functionalized NPs bind to the bilayer. The performance of standard Martini (SM) force field for the charged NP/bilayer systems has also been tested and compared with the results obtained using MPW model. Although the overall trend that the cationic NPs interact strongly with the bilayers than their anionic counterparts has been captured correctly using SM, the adsorption behaviour of the functionalized NPs differ significantly in the SM force field. The interaction of anionic NPs with both fluid and gel bilayers has been observed to be least accurately represented in the SM force field.

Gold nanobipyramid-embedded ultrathin metal nanoframes for in situ monitoring catalytic reactions

Metal nanoframes, especially ultrathin ones, with excellent plasmonic properties are synthetically interesting and highly attractive. Herein we report on the synthesis of Au nanobipyramid-embedded ultrathin metal nanoframes with one of the plasmon modes very similar to that of the Au nanobipyramids. The synthesis is mediated by silver coating on Au nanobipyramids. The excellent plasmonic properties of the Au nanobipyramid-embedded ultrathin metal nanoframes are ascribed to the little influence of the ultrathin metal nanoframes on the Au nanobipyramids, as verified by electrodynamic simulations. The increase in the amount of the added metal atoms changes the nanostructure from the nanoframe to a nanocage shape. The method has also been successfully applied to (Au nanobipyramid)@Ag nanorods with different lengths and Au nanobipyramids with different longitudinal dipolar plasmon wavelengths, suggesting the generality of our approach. We have further shown that the Au nanobipyramid-embedded ultrathin metal nanoframes possess an excellent surface-enhanced Raman scattering and outstanding in situ reaction probing performance. Our study opens up a route for the construction of plasmonic ultrathin metal nanoframes based on Au nanobipyramids for plasmon-enabled applications.

Zwitterionic Stealth Dye-Loaded Polymer Nanoparticles for Intracellular Imaging

Intracellular applications of fluorescent nanoparticles (NPs) as probes and labels are currently limited by significant molecular crowding and the high level of complexity encountered inside living cells. The solution is to develop very small, bright, and noninteracting (stealth) NPs. Combining these properties requires implementing the stealth behavior through the thinnest possible hydrophilic shell. Here, we propose a one-step process for preparing ultrasmall and bright stealth NPs based on a zwitterionic (ZI) methacrylate-based copolymer. Dye-loaded polymer NPs are assembled through nanoprecipitation of the copolymer together with the salt of a rhodamine B derivative and a bulky hydrophobic counterion to achieve high particle brightness. We found that 10 mol % ZI groups in the polymer yield NPs of less than 15 nm that are stable in physiological salt conditions and practically resistant to protein adsorption, as suggested by fluorescence correlation spectroscopy. The combination of the very small size with the nonfouling nature of these particles enables spreading of ZI polymer NPs in the whole cytosol after their microinjection into living cells. In addition, single-particle tracking showed up to four times faster diffusion of ZI NPs in the cytosol compared to PEGylated NPs. The obtained dye-loaded ZI polymer NPs open the route to intracellular single-particle tracking and biosensing applications.

Sperm-Particle Interactions and Their Prospects for Charge Mapping

In this article, a procedure to investigate sperm charge distribution by electrostatic sperm-particle interactions is demonstrated. Differently chargedparticles are fabricated and their attachment distribution on the bovine sperm membrane is investigated. The sperm-particle attachment sites are observed using bright field and cryo-scanning electron microscopy combined with energy-dispersive X-ray analysis. The findings suggest that the charge distribution of the sperm membrane is not uniform, and although the overall net charge of the sperm cell is negative, positively charged areas are especially found on the sperm heads. The newly developed method is used to investigate the dynamic charge distribution of the sperm cell membrane upon maturation induced by heparin, as a representation of the multitude of changes during the development of a sperm.

Gallate-induced nanoparticle uptake by tumor cells: Structure-activity relationships

How nanoparticles interact with biological systems determines whether they can be used in theranostic applications. It has been demonstrated that tea catechins, may enhance interactions of magnetic nanoparticles (MNPs) with tumor cells and the subsequent cellular internalization of MNPs. As part of the chemical structure of the major tea catechins, gallates are found in a variety of plants and thus food components. We asked whether the structure of gallate might act as a pharmacophore in the enhancement of the effects of MNP-cell interactions. Uptake of dextran-coated MNPs by glioma cells and cell-associated MNPs (MNP_cell) were respectively analyzed by confocal microscopy and a colorimetric iron assay. Co-incubation of MNPs and gallates, such as gallic acid and methyl gallate, induced a concentration-dependent increase in MNP_cell, which was associated with co-localization of internalized MNPs and lysosomes. An analysis of the structure-activity relationship (SAR) revealed that the galloyl moiety exerted the most prominent enhancement effects on MNP_cell which was further potentiated by the application of magnetic force; catechol coupled with a conjugated carboxylic acid side chain displayed comparable effects to gallate. Blockade or reduction in the number of hydroxyl groups rendered these compounds less effective, but without inducing cytotoxicity. The SAR results suggest that neighboring hydroxyl groups on the aromatic ring form an essential scaffold for the uptake effects; a similar SAR on antioxidant activities was also observed using a free radical-scavenging method. The results provide pivotal information for theranostic applications of gallates by facilitating nanoparticle-cell interactions and nanoparticle internalization by tumor cells.

Controlled Nano-Bio Interface of Functional Nanoprobes for in Vivo Monitoring Enzyme Activity in Tumors

Engineering inorganic nanoparticles with a biocompatible shell to improve their physicochemical properties is a vital step in taking advantage of their superior magnetic, optical, and photothermal properties as multifunctional molecular imaging probes for disease diagnosis and treatment. The grafting/peeling-off strategy we developed for nanoparticle surface coating can fully control the targeting capability of functional nanoprobes by changing their colloidal behaviors such as diffusion and sedimentation rates at the desired sites. We demonstrated that a cleavable coating layer initially immobilized on the surface of magnetic resonance imaging probes not only makes the nanoparticles water-soluble but also can be selectively removed by specific enzymes, thereby resulting in a significant decrease of their water solubility in an enzyme-rich environment. Upon removal of surface coating, the changes in hydrodynamic size and surface charges of nanoprobes as a result of interacting with biomolecules and proteins lead to dramatic changes in their in vivo colloidal behaviors ( i. e., slow diffusion rates, tendency to aggregate and precipitate), which were quantitatively evaluated by examining changes in their hydrodynamic sizes, magnetic properties, and count rates during the size measurement. Because the retention time of nanoprobes within the tumor tissues depends on the uptake and excretion rate of the nanoprobes through the tumors, selective activation of nanoprobes by a specific enzyme resulted in much higher tumor accumulation and longer retention time within the tumors than that of the inactive nanoprobes, which passively passed through the tumors. The imaging contrast effect of tumors using activatable nanoprobes was significantly improved over using inactive probes. Therefore, the grafting/peeling-off strategy, as a general design approach for surface modification of nanoprobes, offers a promising and highly efficient way to render the nanoparticles suitable for targeted imaging of tumors.

Serum protein corona-responsive autophagy tuning in cells

Autophagy represents an important cellular response to nanoparticles (NPs), whose modulation holds great promise for developing nanomedicine. Here, we systematically studied cell autophagy responses elicited by the NP-protein corona with diverse protein corona types surrounding NPs with different sizes, shapes, and compositions. We demonstrated that these physicochemical properties of NP-protein coronas exerted a remarkable influence on cell autophagy responses. Particularly, for surface protein type-associated modulation of cell autophagy, we correlated the autophagy level to adsorbed protein type on Fe3O4 NPs. Accordingly, we could modulate cell autophagy in response to various levels of protein adsorption. Our work provides new clues to modulate cell autophagy by rational designing NP-protein complexes, which could aid in further biological and therapeutic applications.

Surface Modifications of Nanoparticles for Stability in Biological Fluids

Due to the high surface: volume ratio and the extraordinary properties arising from the nanoscale (optical, electric, magnetic, etc.), nanoparticles (NPs) are excellent candidates for multiple applications. In this context, nanoscience is opening a wide range of modern technologies in biological and biomedical fields, among others. However, one of the main drawbacks that still delays its fast evolution and effectiveness is related to the behavior of nanomaterials in the presence of biological fluids. Unfortunately, biological fluids are characterized by high ionic strengths which usually induce NP aggregation. Besides this problem, the high content in biomacromolecules—such as lipids, sugars, nucleic acids and, especially, proteins—also affects NP stability and its viability for some applications due to, for example, the formation of the protein corona around the NPs. Here, we will review the most common strategies to achieve stable NPs dispersions in high ionic strength fluids and, also, antifouling strategies to avoid the protein adsorption.

Self-assembled, ellipsoidal polymeric nanoparticles for intracellular delivery of therapeutics

Nanoparticle shape has emerged as a key regulator of nanoparticle transport across physiological barriers, intracellular uptake, and biodistribution. We report a facile approach to synthesize ellipsoidal nanoparticles through self-assembly of poly(glycerol sebacate)-co-poly(ethylene glycol) (PGS-co-PEG). The PGS-PEG nanoparticle system is highly tunable, and the semiaxis length of the nanoparticles can be modulated by changing PGS-PEG molar ratio and incorporating therapeutics. As both PGS and PEG are highly biocompatible, the PGS-co-PEG nanoparticles show high hemo-, immuno-, and cytocompatibility. Our data suggest that PGS-co-PEG nanoparticles have the potential for use in a wide range of biomedical applications including regenerative medicine, stem cell engineering, immune modulation, and cancer therapeutics. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2048-2058, 2018.

Synthesis of hafnium nanoparticles and hafnium nanoparticle films by gas condensation and energetic deposition

In this work we study the fabrication and characterization of hafnium nanoparticles and hafnium nanoparticle thin films. Hafnium nanoparticles were grown in vacuum by magnetron-sputtering inert-gas condensation. The as deposited nanoparticles have a hexagonal close-packed crystal structure, they possess truncated hexagonal biprism shape and are prone to surface oxidation when exposed to ambient air forming core-shell Hf/HfO₂ structures. Hafnium nanoparticle thin films were formed through energetic nanoparticle deposition. This technique allows for the control of the energy of charged nanoparticles during vacuum deposition. The structural and nanomechanical properties of the nanoparticle thin films were investigated as a function of the kinetic energy of the nanoparticles. The results reveal that by proper adjustment of the nanoparticle energy, hexagonal close-packed porous nanoparticle thin films with good mechanical properties can be formed, without any additional treatment. It is shown that these films can be patterned on the substrate in sub-micrometer dimensions using conventional lithography while their porosity can be well controlled. The fabrication and experimental characterization of hafnium nanoparticles is reported for the first time in the literature.

Application of nanotechnology in biosensors for enhancing pathogen detection

Rapid detection and identification of pathogenic microorganisms is fundamental to minimizing the spread of infectious disease, and informing clinicians on patient treatment strategies. This need has led to the development of enhanced biosensors that utilize state of the art nanomaterials and nanotechnology, and represent the next generation of diagnostics. A primer on nanoscale biorecognition elements such as, nucleic acids, antibodies, and their synthetic analogs (molecular imprinted polymers), will be presented first. Next the application of various nanotechnologies for biosensor transduction will be discussed, along with the inherent nanoscale phenomenon that leads to their improved performance and capabilities in biosensor systems. A future outlook on characterization and quality assurance, nanotoxicity, and nanomaterial integration into lab-on-a-chip systems will provide the closing thoughts. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > Biosensing.

Light-Emitting Transition Metal Dichalcogenide Monolayers under Cellular Digestion

2D materials cover a wide spectrum of electronic properties. Their applications are extended from electronic, optical, and chemical to biological. In terms of biomedical uses of 2D materials, the interactions between living cells and 2D materials are of paramount importance. However, biointerfacial studies are still in their infancy. This work studies how living organisms interact with transition metal dichalcogenide monolayers. For the first time, cellular digestion of tungsten disulfide (WS₂ ) monolayers is observed. After digestion, cells intake WS₂ and become fluorescent. In addition, these light-emitting cells are not only viable, but also able to pass fluorescent signals to their progeny cells after cell division. By combining synthesis of 2D materials and a cell culturing technique, a procedure for monitoring the interactions between WS₂ monolayers and cells is developed. These observations open up new avenues for developing novel cellular labeling and imaging approaches, thus triggering further studies on interactions between 2D materials and living organisms.

Mechanical determination of particle–cell interactions and the associated biomedical applications

Mechanical determination of particle–cell interactions and the associated biomedical applications.

Ion Transport across Biological Membranes by Carborane-Capped Gold Nanoparticles

Carborane-capped gold nanoparticles (Au/carborane NPs, 2-3 nm) can act as artificial ion transporters across biological membranes. The particles themselves are large hydrophobic anions that have the ability to disperse in aqueous media and to partition over both sides of a phospholipid bilayer membrane. Their presence therefore causes a membrane potential that is determined by the relative concentrations of particles on each side of the membrane according to the Nernst equation. The particles tend to adsorb to both sides of the membrane and can flip across if changes in membrane potential require their repartitioning. Such changes can be made either with a potentiostat in an electrochemical cell or by competition with another partitioning ion, for example, potassium in the presence of its specific transporter valinomycin. Carborane-capped gold nanoparticles have a ligand shell full of voids, which stem from the packing of near spherical ligands on a near spherical metal core. These voids are normally filled with sodium or potassium ions, and the charge is overcompensated by excess electrons in the metal core. The anionic particles are therefore able to take up and release a certain payload of cations and to adjust their net charge accordingly. It is demonstrated by potential-dependent fluorescence spectroscopy that polarized phospholipid membranes of vesicles can be depolarized by ion transport mediated by the particles. It is also shown that the particles act as alkali-ion-specific transporters across free-standing membranes under potentiostatic control. Magnesium ions are not transported.

Intraorgan Targeting of Gold Conjugates for Precise Liver Cancer Treatment

Intraorgan targeting of chemical drugs at tumor tissues is essential in the treatment of solid tumors that express the same target receptor as normal tissues. Here, asialoglycoprotein receptor (ASGP-R)-targeting paclitaxel-conjugated gold nanoparticles (Gal/PTX-GNPs) are fabricated as a demonstration to realize the precise treatment of liver cancer. The enhanced biological specificity and therapeutic performance of drugs loaded on nanoparticles not only rely on the ligands on carriers for receptor recognition but are also determined by the performance of gold conjugates with designed structure. The tumor cell selectivity of the designed conjugates in liver tumor (HepG2) cells is close to six times of that incubated with control conjugates without galactose modification in liver normal (L02) cells. The drug level in tumor versus liver of Gal/PTX-GNPs is 121.0% at 8 h post injection, a 15.7-fold increase in the tumor specificity compared to that of GNPs conjugated with PTX only. This intraorgan-targeting strategy results in a considerable improvement of performance in treating both Heps heterotopic and orthotopic xenograft tumor models, which is expected to be used for the enhanced antitumor efficacy and reduced hepatotoxicity in liver cancer treatment.

Preparation of particulate polymeric therapeutics for medical applications

Particulate therapeutics fabricated from polymeric materials have become increasingly popular over the past several decades. Generally, polymeric systems are easy to synthesize and have tunable parameters, giving them significant potential for wide use in the clinic. They come in many different forms, including as nanoparticles, microparticles, and colloidal gels. In this review, we discuss the current preparation methods for each type of platform, as well as some representative applications. To achieve enhanced performance, lipid coatings and other surface modification techniques for introducing additional functionality are also mentioned. We hope that, by outlining the various methods and techniques for their preparation, it will be possible to provide insights into the utility of these polymeric platforms and further encourage their development for biomedical applications.

Protein Corona: Impact of Lymph Versus Blood in a Complex In Vitro Environment

In biological environments, the surface of nanoparticles (NPs) are modified by protein corona (PC) that determines their biological behavior. Unfortunately, in vitro tests still give different PC than in vivo tests causing in vitro-in vivo discrepancy; hence, in vitro studies are not indicative for the NPs' behavior in vivo. Here is demonstrated that PC in vitro is strongly influenced by the type of extracellular fluid (ECF), blood or lymph, by their high and low flow conditions and transitions between ECFs, and a combination of these parameters. As a result, this in vitro study approaches fluidic and dynamic variations to which NPs are exposed in vivo: different ECF that NPs encounter first in different injection routes, different transitions in-between ECFs during circulation, and simultaneous change in the exposed flow in these transitions. The most-abundant proteins in PCs are found to be not the most abundant in ECFs, but those having high affinity for binding to the surface of NPs. Moreover, some proteins are differently abundant in PCs at different flows, which indicate force-promoted binding, catch bonds. These results suggest that future in vitro studies should consider more complex incubation conditions to improve the in vitro-in vivo consistency necessary for translational research.

Programmable Nano-Bio Interfaces for Functional Biointegrated Devices

A large amount of evidence has demonstrated the revolutionary role of nanosystems in the screening and shielding of biological systems. The explosive development of interfacing bioentities with programmable nanomaterials has conveyed the intriguing concept of nano-bio interfaces. Here, recent advances in functional biointegrated devices through the precise programming of nano-bio interactions are outlined, especially with regard to the rational assembly of constituent nanomaterials on multiple dimension scales (e.g., nanoparticles, nanowires, layered nanomaterials, and 3D-architectured nanomaterials), in order to leverage their respective intrinsic merits for different functions. Emerging nanotechnological strategies at nano-bio interfaces are also highlighted, such as multimodal diagnosis or "theragnostics", synergistic and sequential therapeutics delivery, and stretchable and flexible nanoelectronic devices, and their implementation into a broad range of biointegrated devices (e.g., implantable, minimally invasive, and wearable devices). When utilized as functional modules of biointegrated devices, these programmable nano-bio interfaces will open up a new chapter for precision nanomedicine.

Surface plasmon resonance in gold nanoparticles: a review

In the last two decades, plasmon resonance in gold nanoparticles (Au NPs) has been the subject of intense research efforts. Plasmon physics is intriguing and its precise modelling proved to be challenging. In fact, plasmons are highly responsive to a multitude of factors, either intrinsic to the Au NPs or from the environment, and recently the need emerged for the correction of standard electromagnetic approaches with quantum effects. Applications related to plasmon absorption and scattering in Au NPs are impressively numerous, ranging from sensing to photothermal effects to cell imaging. Also, plasmon-enhanced phenomena are highly interesting for multiple purposes, including, for instance, Raman spectroscopy of nearby analytes, catalysis, or sunlight energy conversion. In addition, plasmon excitation is involved in a series of advanced physical processes such as non-linear optics, optical trapping, magneto-plasmonics, and optical activity. Here, we provide the general overview of the field and the background for appropriate modelling of the physical phenomena. Then, we report on the current state of the art and most recent applications of plasmon resonance in Au NPs.

Aptamer-conjugated PEGylated quantum dots targeting epidermal growth factor receptor variant III for fluorescence imaging of glioma

The extent of resection is a significant prognostic factor in glioma patients. However, the maximum safe resection level is difficult to determine due to the inherent infiltrative character of tumors. Recently, fluorescence-guided surgery has emerged as a new technique that allows safe resection of glioma. In this study, we constructed a new kind of quantum dot (QD)-labeled aptamer (QD-Apt) nanoprobe by conjugating aptamer 32 (A32) to the QDs surface, which can specially bind to the tumors. A32 is a single-stranded DNA capable of binding to the epidermal growth factor receptor variant III (EGFRvIII) specially distributed on the surface of glioma cells. To detect the expression of EGFRvIII in human brain tissues, 120 specimens, including 110 glioma tissues and 10 normal brain tissues, were examined by immunohistochemistry, and the results showed that the rate of positive expression of EGFRvIII in the glioma tissues was 41.82%, and 0.00% in normal brain tissues. Besides, the physiochemical properties of QD-Apt nanoparticles (NPs) were thoroughly characterized. Biocompatibility of the NPs was evaluated, and the results suggested that the QD-Apt was nontoxic in vivo and vitro. Furthermore, the use of the QD-Apt in labeling glioma cell lines and human brain glioma tissues, and target gliomas in situ was also investigated. We found that not only could QD-Apt specially bind to the U87-EGFRvIII glioma cells but also bind to human glioma tissues in vitro. Fluorescence imaging in vivo with orthotopic glioma model mice bearing U87-EGFRvIII showed that QD-Apt could penetrate the blood-brain barrier and then selectively accumulate in the tumors through binding to EGFRvIII, and consequently, generate a strong fluorescence, which contributed to the margins of gliomas that were visualized clearly, and thus, help the surgeons realize the maximum safe resection of glioma. In addition, QD-Apt can also be applied in preoperative diagnosis and postoperative examination of glioma. Therefore, these achievements facilitate the use of tumor-targeted fluorescence imaging in the diagnosis, surgical resection, and postoperative examination of glioma.

Alumina nanoparticle-assisted enzyme refolding: A versatile methodology for proteins renaturation

We present a high-yield method for the renaturation of negatively charged enzymes. The approach is based on the use of alumina nanoparticles, which after electrostatic interaction with denatured protein molecules, prevent their aggregation and make the process of refolding controllable. The method, demonstrated by the renaturation of several enzymes, is efficient, rapid, employs a minimal amount of reagents and even can be applied to renature mixture of the denatured enzymes.

Carbon dots based FRET for the detection of DNA damage

Here, we aimed our attention at the synthesis of carbon dots (C-dots) with the ability to interact with DNA to suggest an approach for the detection of DNA damage. Primarily, C-dots modified with amine moieties were synthesized using the one-step microwave pyrolysis of citric acid in the presence of diethylenetriamine. The C-dots showed strong photoluminescence with a quantum yield of 4%. In addition, the C-dots (2.8±0.8nm) possessed a good colloidal stability and exhibited a positive surface charge (ζ=36mV) at a neutral pH. An interaction study of the C-dots and the DNA fragment of λ bacteriophage was performed, and the DNA binding resulted in changes to the photoluminescent and absorption properties of the C-dots. A binding of the C-dots to DNA was also observed as a change to DNA electrophoretic mobility and a decreased ability to intercalate ethidium bromide (EtBr). Moreover, the Förster (or fluorescence) resonance energy transfer (FRET) between the C-dots and EtBr was studied, in which the C-dots serve as an excitation energy donor and the EtBr serves as an acceptor. When DNA was damaged using ultraviolet (UV) radiation (λ=254nm) and hydroxyl radicals, the intensity of the emitted photoluminescence at 612nm significantly decreased. The concept was proved on analysis of the genomic DNA from PC-3 cells and DNA isolated from melanoma tissues.

Influence of gold nanoparticle surface chemistry and diameter upon Alzheimer's disease amyloid-β protein aggregation

Background

Deposits of aggregated amyloid-β protein (Aβ) are a pathological hallmark of Alzheimer’s disease (AD). Thus, one therapeutic strategy is to eliminate these deposits by halting Aβ aggregation. While a variety of possible aggregation inhibitors have been explored, only nanoparticles (NPs) exhibit promise at low substoichiometric ratios. With tunable size, shape, and surface properties, NPs present an ideal platform for rationally designed Aβ aggregation inhibitors. In this study, we characterized the inhibitory capabilities of gold nanospheres exhibiting different surface coatings and diameters.

Results

Both NP diameter and surface chemistry were found to modulate the extent of aggregation, while NP electric charge influenced aggregate morphology. Notably, 8 nm and 18 nm poly(acrylic acid)-coated NPs abrogated Aβ aggregation at a substoichiometric ratio of 1:2,000,000. Theoretical calculations suggest that this low stoichiometry could arise from altered solution conditions near the NP surface. Specifically, local solution pH and charge density are congruent with conditions that influence aggregation.

Conclusions

These findings demonstrate the potential of surface-coated gold nanospheres to serve as tunable therapeutic agents for the inhibition of Aβ aggregation. Insights gained into the physiochemical properties of effective NP inhibitors will inform future rational design of effective NP-based therapeutics for AD.

Electronic supplementary material

The online version of this article (doi:10.1186/s13036-017-0047-6) contains supplementary material, which is available to authorized users.

Nanosized Building Blocks for Customizing Novel Antibiofilm Approaches

Recent advances in nanotechnology provide unparalleled flexibility to control the composition, size, shape, surface chemistry, and functionality of materials. Currently available engineering approaches allow precise synthesis of nanocompounds (e.g., nanoparticles, nanostructures, nanocrystals) with both top-down and bottom-up design principles at the submicron level. In this context, these "nanoelements" (NEs) or "nanosized building blocks" can 1) generate new nanocomposites with antibiofilm properties or 2) be used to coat existing surfaces (e.g., teeth) and exogenously introduced surfaces (e.g., restorative or implant materials) for prevention of bacterial adhesion and biofilm formation. Furthermore, functionalized NEs 3) can be conceived as nanoparticles to carry and selectively release antimicrobial agents after attachment or within oral biofilms, resulting in their disruption. The latter mechanism includes "smart release" of agents when triggered by pathogenic microenvironments (e.g., acidic pH or low oxygen levels) for localized and controlled drug delivery to simultaneously kill bacteria and dismantle the biofilm matrix. Here we discuss inorganic, metallic, polymeric, and carbon-based NEs for their outstanding chemical flexibility, stability, and antibiofilm properties manifested when converted into bioactive materials, assembled on-site or delivered at biofilm-surface interfaces. Details are provided on the emerging concept of the rational design of NEs and recent technological breakthroughs for the development of a new generation of nanocoatings or functional nanoparticles for biofilm control in the oral cavity.

Toward the suppression of cellular toxicity from single-walled carbon nanotubes

In the multidisciplinary fields of nanobiology and nanomedicine, single-walled carbon nanotubes (SWCNTs) have shown great promise due to their unique morphological, physical and chemical properties. However, understanding and suppressing their cellular toxicity is a mandatory step before promoting their biomedical applications. In light of the flourishing recent literature, we provide here an extensive review on SWCNT cellular toxicity and an attempt to identify the key parameters to be considered in order to obtain SWCNT samples with minimal or no cellular toxicity.