Dithienocarbazole and isoindigo based amorphous low bandgap conjugated polymers for efficient polymer solar cells

β-Isoindigo-azaDIPYs: Fully Conjugated Hybrid Systems with Broad Absorption in the Visible Region

A one-step synthetic pathway for the preparation of fully conjugated β-isoindigo-azaDIPY hybrid chromophores comprised of β-isoindigo and azadipyrromethene moieties is reported. The target compounds were characterized by spectroscopic, crystallographic, and theoretical methods and show unprecedented broad absorption across the visible region of the electromagnetic spectrum. The X-ray crystal structure of the octa(n-butyl)-β-isoindigo-azaDIPY derivative revealed that a trans-configuration of the β-isoindigo fragment accompanies a planar conjugated core.

Environmentally Benign Route for Scalable Preparation of 1-Imino-3-thioisoindolines-The Key Building Blocks for the Synthesis of Dithio- and Diamino-β-isoindigo Derivatives

A one-step, gram-scale protocol for the preparation of 1-imino-3-thioisoindolines and a novel one-pot two-step methodology of the synthesis of dithio- or diamino-β-isoindigo derivatives starting from phthalonitriles and sodium hydrosulfide in an aprotic dipolar solvent have been developed. It was demonstrated that the electronic properties of the substituent(s) in the phthalonitrile core play a critical role in β-isoindigo synthesis resulting either in the selective formation of dithio- or diamino-β-isoindigo chromophores. The N-acylated 1-imino-3-thioisoindolines can be used for the direct, easily scalable, and chromatography-free procedure for the preparation of a new class of N,N'-diacylamino-β-isoindigoid compounds. Properties of the monomeric as well as J-aggregated forms of dithio- and diamino-β-isoindigo were probed by the absorption and fluorescence spectroscopies. It was demonstrated that the tetracyano-diamino-β-isoindigo 3f can form a J-aggregate that absorbs at 793 nm and fluoresces at 824 nm. This aggregate is stable in N,N-dimethylformamide solution; however, it slowly dissociates in tetrahydrofuran or under sonication conditions. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations were employed to elucidate the electronic structures, spectroscopic properties, and aggregation of new dithio- and diamino-β-isoindigo derivatives.

The Role of Demixing and Crystallization Kinetics on the Stability of Non-Fullerene Organic Solar Cells

With power conversion efficiency now over 17%, a long operational lifetime is essential for the successful application of organic solar cells. However, most non-fullerene acceptors can crystallize and destroy devices, yet the fundamental underlying thermodynamic and kinetic aspects of acceptor crystallization have received limited attention. Here, room-temperature (RT) diffusion coefficients of 3.4 × 10^-23 and 2.0 × 10^-22 are measured for ITIC-2Cl and ITIC-2F, two state-of-the-art non-fullerene acceptors. The low coefficients are enough to provide for kinetic stabilization of the morphology against demixing at RT. Additionally profound differences in crystallization characteristics are discovered between ITIC-2F and ITIC-2Cl. The differences as observed by secondary-ion mass spectrometry, differential scanning calorimetry (DSC), grazing-incidence wide-angle X-ray scattering, and microscopy can be related directly to device degradation and are attributed to the significantly different nucleation and growth rates, with a difference in the growth rate of a factor of 12 at RT. ITIC-4F and ITIC-4Cl exhibit similar characteristics. The results reveal the importance of diffusion coefficients and melting enthalpies in controlling the growth rates, and that differences in halogenation can drastically change crystallization kinetics and device stability. It is furthermore delineated how low nucleation density and large growth rates can be inferred from DSC and microscopy experiments which could be used to guide molecular design for stability.

Driving high quantum yield NIR emission through proquinoidal linkage motifs in conjugated supermolecular arrays

High quantum yield NIR fluorophores are rare. Factors that drive low emission quantum yields at long wavelength include the facts that radiative rate constants increase proportional to the cube of the emission energy, while nonradiative rate constants increase in an approximately exponentially with decreasing S₀-S₁ energy gaps (in accordance with the energy gap law). This work demonstrates how the proquinoidal BTD building blocks can be utilized to minimize the extent of excited-state structural relaxation relative to the ground-state conformation in highly conjugated porphyrin oligomers, and shows that 4-ethynylbenzo[c][1,2,5]thiadiazole (E-BTD) units that terminate meso-to-meso ethyne-bridged (porphinato)zinc (PZnn) arrays, and 4,7-diethynylbenzo[c][1,2,5]thiadiazole (E-BTD-E) spacers that are integrated into the backbone of these compositions, elucidate new classes of impressive NIR fluorophores. We report the syntheses, electronic structural properties, and emissive characteristics of neoteric PZn-(BTD-PZn)n, PZn2-(BTD-PZn2)n, and BTD-PZnn-BTD fluorophores. Absolute fluorescence quantum yield (ϕ _f) measurements, acquired using a calibrated integrating-sphere-based measurement system, demonstrate that these supermolecules display extraordinary ϕ _f values that range from 10-25% in THF solvent, and between 28-36% in toluene solvent over the 700-900 nm window of the NIR. These studies underscore how the regulation of proquinoidal conjugation motifs can be exploited to drive excited-state dynamical properties important for high quantum yield long-wavelength fluorescence emission.

Synthesis and Density Functional Theory Studies of Azirinyl and Oxiranyl Functionalized Isoindigo and (3Z,3'Z)-3,3'-(ethane-1,2-diylidene)bis(indolin-2-one) Derivatives

The design and synthesis of functionalized isoindigo compounds by reaction of isoindigo with (S)-glycidyl tosylate, epibromohydrin, 2-(bromomethyl)-1-(arylsulfonyl)aziridine, and 2-(bromomethyl)-1-(alkylsulfonyl)aziridine in the presence of MeONa proceed under mild conditions in moderate yields. (3Z,3'Z)-3,3'-(Ethane-1,2-diylidene)bis(1-(oxiran-2-ylmethyl)indolin-2-one), with an extended central olefin π-conjugated moiety was also reacted with methyl-oxiranes to give the corresponding N,N'-disubstituted derivative. Calculations with DFT and TD-DFT of hypothetical isoindigo-thiophene DA molecules with various electron withdrawing substituents, including aziridine, oxirane, nitrile, carbonyl, and sulfonate, indicated that the proximity and strength of the functional group have a significant effect on the HOMO, LUMO, vertical excitation energy, and oscillator strength of the π-π* transitions.

Recent Advances in n-Type Polymers for All-Polymer Solar Cells

All-polymer solar cells (all-PSCs) based on n- and p-type polymers have emerged as promising alternatives to fullerene-based solar cells due to their unique advantages such as good chemical and electronic adjustability, and better thermal and photochemical stabilities. Rapid advances have been made in the development of n-type polymers consisting of various electron acceptor units for all-PSCs. So far, more than 200 n-type polymer acceptors have been reported. In the last seven years, the power conversion efficiency (PCE) of all-PSCs rapidly increased and has now surpassed 10%, meaning they are approaching the performance of state-of-the-art solar cells using fullerene derivatives as acceptors. This review discusses the design criteria, synthesis, and structure-property relationships of n-type polymers that have been used in all-PSCs. Additionally, it highlights the recent progress toward photovoltaic performance enhancement of binary, ternary, and tandem all-PSCs. Finally, the challenges and prospects for further development of all-PSCs are briefly considered.

Scaffold-Induced Diketopyrrolopyrrole Molecular Stacks in a Covalent Organic Framework

In recent years, covalent organic frameworks (COFs) have attracted considerable attention due to their crystalline and porous nature, which positions them as intriguing candidates for diverse applications such as catalysis, sensing, or optoelectronics. The incorporation of dyes or semiconducting moieties into a rigid two-dimensional COF can offer emergent features such as enhanced light harvesting or charge transport. However, this approach can be challenging when dealing with dye molecules that exhibit a large aromatic backbone, since the steric demand of solubilizing side chains also needs to be integrated into the framework. Here, we report the successful synthesis of DPP2-HHTP-COF consisting of diketopyrrolopyrrole (DPP) diboronic acid and hexahydroxytriphenylene (HHTP) building blocks. The well-known boronate ester coupling motif guides the formation of a planar and rigid backbone and long-range molecular DPP stacks, resulting in a highly crystalline and porous material. DPP2-HHTP-COF exhibits excellent optical properties including strong absorption over the visible spectral range, broad emission into the NIR and a singlet lifetime of over 5 ns attributed to the formation of molecular stacks with J-type interactions between the DPP subcomponents in the COF. Electrical conductivity measurements of crystalline DPP2-HHTP-COF pellets revealed conductivity values of up to 10^-6 S cm^-1.

Fluorinated dithienyl-diketopyrrolopyrrole: a new building block for organic optoelectronic materials

The synthesis of monofluorinated and difluorinated dithienyl-DPP was reported using a stepwise synthesis method starting from the preparation of pyrrolinone followed by condensation with methyl thiophene-2-carbimidate derivatives.

Synthesis and photophysical characterization of isoindigo building blocks as molecular acceptors for organic photovoltaics

Five isoindigo-based donor-acceptor-donor (D-A-D) type small molecules have been synthesized in order to investigate their intramolecular charge transfer characteristics. UV-vis absorption of these dyes exhibits a wide absorption band ranging from 300 to 650 nm with two distinct bands, giving the narrow bandgaps between 1.72 and 1.85 eV. Taking into account their HOMO-LUMO energy levels and bandgaps, isoindigo dyes have been used in the active layer of organic solar cell (OSC) devices. When these small molecule semiconductors were used as acceptors with the donor poly(3-hexylthiophene-2,5-diyl (P3HT) polymer in the inverted OSC devices, the highest power conversion efficiency (PCE) was obtained as 0.10% for pyrene-substituted isoindigo derivative.

Improved Efficiency of Polymer Solar Cells by Modifying the Side Chain of Wide-Band Gap Conjugated Polymers Containing Pyrrolo[3,4- f]benzotriazole-5,7(6 H)-dione Moiety

Two novel wide-band gap donor-acceptor-type conjugated copolymers, PTzBI-S and PTzBI-Ph, are designed and synthesized, based on alkylthio-thienyl- or alkylphenyl-substituted benzodithiophene (BDT) derivatives as the electron-donating unit and pyrrolo[3,4- f]benzotriazole-5,7(6 H)-dione as the electron-withdrawing unit. The as-generated copolymers show the comparable optical and electrochemical properties. The alkylthio-thienyl-substituted BDT unit facilities a benign decrease of the highest occupied molecular orbital (HOMO) levels. This consequently enhances open-circuit voltages ( V_OC) over 0.9 V in relevant solar cells with the fullerene acceptor ([6, 6]-phenyl-C71-butyric acid methyl ester, PC₇₁BM) or the nonfullerene acceptor (3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3- d:2',3'- d']- s-indaceno[1,2- b:5,6- b']dithiophene, ITIC). The combination studies of Fourier transform photocurrent spectroscopy and electroluminescence further rationalize the V_OC difference between solar cells with fullerene and nonfullerene acceptors. An impressively high power conversion efficiency of 10.19% is obtained for the device based on PTzBI-Ph:ITIC, outperforming the 8.84% achieved by the PC₇₁BM-based device. Our results demonstrate that the modification of substituents of BDT units can effectively decrease the HOMO level and consequently improve V_OC, ultimately allowing the attainment of high-efficiency polymer solar cells.

Thiazoloisoindigo: A Building Block that Merges the Merits of Thienoisoindigo and Diazaisoindigo for Conjugated Polymers

Thiazoloisoindigo, a novel structural variation of isoindigo, is for the first time utilized to synthesize conjugated polymers. The polymer based on thiazoloisoindigo merges the advantages of the one based on thienoisoindigo and diazaisoindigo; it not only exhibits a greatly redshifted UV/Vis absorption to the near-infrared region owing to its strong tendency to form quinoidal structures, similar to that based on thienoisoindigo, but also shows excellent ambipolar mobility (hole: 3.93, electron: 1.07 cm²  V^-1  s^-1 ) in organic field-effect transistors (OFETs), superior to that based on diazaisoindigo, showing the strong electron-withdrawing capability of thiazoloisoindigo.

Quantitative correlation of the effects of crystallinity and additives on nanomorphology and solar cell performance of isoindigo-based copolymers

The high power conversion efficiency of bulk heterojunction (BHJ) polymer solar cells can be achieved from either low crystallinity (P3TI) or high crystallinity (P6TI) of isoindigo-based donor-acceptor alternating copolymers blended with PC₇₁BM by controlling nanophase separation using additives. P3TI shows similar device performance regardless of the type of additives, while P6TI is significantly affected by whether the additive is aliphatic or aromatic. To understand the interplays of crystallinity of polymers and the type of additive on the formation of nanomorphology of BHJ, we employed the simultaneous grazing-incidence small- and wide-angle X-ray scattering (GISAXS and GIWAXS) technique to perform the quantitative investigation. By incorporating additives, the PC₇₁BM molecules can be easily intercalated into the P3TI polymer-rich domain and the size of the PC₇₁BM clusters is reduced from about 24 nm to about 5 nm by either aliphatic 1,8-diiodooctane (DIO) or aromatic 1-chloronaphthalene (CN). On comparison, it is found to be more difficult for PC₇₁BM molecules to be intercalated into the highly crystalline P6TI dense domain, and the PC₇₁BM molecules have a higher tendency to be self-aggregated, which results in a larger size of PC₇₁BM clusters of about 58 nm. The clusters can be reduced to about 7 nm by DIO and 13 nm by CN. The presence of crystallites in the P6TI domain can interact with the additive to tailor the crystallization of PC₇₁BM clusters to a size similar to that of P6TI crystallites (∼12 nm) and form a connected network for efficient charge transportation. Thus, the power conversion efficiency of P6TI:PC₇₁BM reaches its maximum of 7.04% using aromatic CN additives. This is a new finding of the effect of crystallinity, which is not observed in the common low crystalline donor-acceptor alternating copolymers such as PTB7. Our results provide a useful guideline to manipulate the desired morphology of BHJ films constructed from alternating copolymer with different crystallinity, which is critical for achieving high power conversion efficiency of solar cells.

Enhancing Molecular n-Type Doping of Donor-Acceptor Copolymers by Tailoring Side Chains

In this contribution, for the first time, the molecular n-doping of a donor-acceptor (D-A) copolymer achieving 200-fold enhancement of electrical conductivity by rationally tailoring the side chains without changing its D-A backbone is successfully improved. Instead of the traditional alkyl side chains for poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl](NDI)-alt-5,5'-(2,2'-bithiophene)} (N2200), polar triethylene glycol type side chains is utilized and a high electrical conductivity of 0.17 S cm^-1 after doping with (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine is achieved, which is the highest reported value for n-type D-A copolymers. Coarse-grained molecular dynamics simulations indicate that the polar side chains can significantly reduce the clustering of dopant molecules and favor the dispersion of the dopant in the host matrix as compared to the traditional alkyl side chains. Accordingly, intimate contact between the host and dopant molecules in the NDI-based copolymer with polar side chains facilitates molecular doping with increased doping efficiency and electrical conductivity. For the first time, a heterogeneous thermoelectric transport model for such a material is proposed, that is the percolation of charge carriers from conducting ordered regions through poorly conductive disordered regions, which provides pointers for further increase in the themoelectric properties of n-type D-A copolymers.

Highly efficient polymer solar cells with a thienopyrroledione and benzodithiophene containing planar random copolymer

A new random copolymer based on thienopyrroledione and benzodithiophene units with a high degree of planarity was developed for high-performance organic solar cells.

Isoindigo-dicyanobithiophene-Based Copolymer for High Performance Polymer-Fullerene Solar Cells Reaching 1.06 V Open Circuit Voltage and 8.36% Power Conversion Efficiency

To investigate the effect of substitution of cyano groups (CN) on D-π-A type conjugated copolymer in photophysical and photovoltaic properties, a non-CN-substituted P4TIH and a CN-substituted P4TIN isoindigo-based copolymers were synthesized and characterized. Having dicyano-substituted bithiophene as electron-donating segment and isoindigo as electron-accepting segment, P4TIN exhibits a deeper highest occupied molecular orbital energy level (HOMO) than that of the non-CN-substituted P4TIH. Benefiting from the improved solubility via copolymer side-chain substituent (2-decylteradecyl), inverted solar cells fabricated with a thick (∼200 nm) active layer (P4TIN:PC₆₁BM, 1:2.0) have achieved a very high open circuit voltage of 1.06 V. High power conversion efficiency of 8.36% can be reached without thermal annealing treatment or processing solvent additives.

The Curious Case of Fluorination of Conjugated Polymers for Solar Cells

Organic solar cells (OSCs) have been a rising star in the field of renewable energy since the introduction of the bulk heterojunction (BHJ) in 1992. Recent advances have pushed the efficiencies of OSCs to over 13%, an impressive accomplishment via collaborative efforts in rational materials design and synthesis, careful device engineering, and fundamental understanding of device physics. Throughout these endeavors, several design principles for the conjugated donor polymers used in such solar cells have emerged, including optimizing the conjugated backbone with judicious selection of building blocks, side-chain engineering, and substituents. Among all of the substituents, fluorine is probably the most popular one; improved device characteristics with fluorination have frequently been reported for a wide range of conjugated polymers, in particular, donor-acceptor (D-A)-type polymers. Herein we examine the effect of fluorination on the device performance of solar cells as a function of the position of fluorination (on the acceptor unit or on the donor unit), aiming to outline a clear understanding of the benefits of this curious substituent. As fluorination of the acceptor unit is the most adopted strategy for D-A polymers, we first discuss the effect of fluorination of the acceptor units, highlighting the five most widely utilized acceptor units. While improved device efficiency has been widely observed with fluorinated acceptor units, the underlying reasons vary from case to case and highly depend on the chemical structure of the polymer. Second, the effect of fluorination of the donor unit is addressed. Here we focus on four donor units that have been most studied with fluorination. While device-performance-enhancing effects by fluorination of the donor units have also been observed, it is less clear that fluorine will always benefit the efficiency of the OSC, as there are several cases where the efficiency drops, in particular with "over-fluorination", i.e., when too many fluorine substituents are incorporated. Finally, while this Account focuses on studies in which the polymer is paired with fullerene derivatives as the electron accepting materials, non-fullerene acceptors (NFAs) are quickly becoming key players in the field of OSCs. The effect of fluorination of the polymers on the device performance may be different when NFAs are used as the electron-accepting materials, which remains to be investigated. However, the design of fluorinated polymers may provide guidelines for the design of more efficient NFAs. Indeed, the current highest-performing OSC (∼13%) features fluorination on both the donor polymer and the non-fullerene acceptor.

Morphology Control in Films of Isoindigo Polymers by Side-Chain and Molecular Weight Effects

The performance of devices relying on organic electronic materials, such as organic field-effect transistors (OFET) and organic photovoltaics (OPV), is strongly correlated to the morphology of the conjugated material in thin films. For instance, several factors such as polymer solubility, weak intermolecular forces between polymers and fullerene derivatives, and film drying time impact phase separation in the active layer of a bulk heterojunction OPV device. In an effort to probe the influence of polymer assembly on morphology of polymer thin films and phase separation with fullerene derivatives, five terthiophene-alt-isoindigo copolymers were synthesized with alkyl side-chains of varying lengths and branching on the terthiophene unit. These P[T3(R)-iI] polymers were designed to have similar optoelectronic properties but different solubilities in o-dichlorobenzene and were predicted to have different tendencies for crystallization. All polymers with linear alkyl chains exhibit similar thin film morphologies as investigated by grazing-incidence wide-angle X-ray scattering (GIWAXS) and atomic force microscopy (AFM). The main differences in electronic and morphological properties arise when P[T3(R)-iI] is substituted with branched 2-ethylhexyl (2EH) side-chains. The bulky 2EH substituents lead to a blue-shifted absorption, a lower ionization potential, and reduced ordering in polymer thin films. The five P[T3-iI] derivatives span hole mobilities from 1.5 × 10^-3 to 2.8 × 10^-2 cm² V^-1 s^-1 in OFET devices. In OPV devices, the 2EH-substituted polymers yield open-circuit voltages of 0.88 V in BHJ devices yet low short-circuit currents of 0.8 mA cm^-2, which is explained by the large phase separation observed by AFM in blends of P[T3(2EH)-iI] with PC₇₁BM. In these P[T3(R)-iI] systems, the propensity for the polymers to self-assemble prior to aggregation of PC₇₁BM molecules was key to achieving fine phase separation and increased short-circuit currents, eventually resulting in power conversion efficiencies of 5% in devices processed using a single solvent.

Bithienopyrroledione vs. thienopyrroledione based copolymers: dramatic increase of power conversion efficiency in bulk heterojunction solar cells

Bithienopyrroledione (bi-TPD) based polymers P1 and P2 are designed and synthesized.

Donor–acceptor conjugated polymers based on two-dimensional thiophene derivatives for bulk heterojunction solar cells

D–A conjugated polymers based on accessible 2D conjugated (E)-1,2-bis(5-alkyl-[2,3′-bithiophen]-2′-yl)ethene units possess low bandgaps, shorter π–π stacking distances, higher mobility and higher photovoltaic performance.

Photovoltaic Small Molecules of TPA(FxBT-T-Cz)3: Tuning Open-Circuit Voltage over 1.0 V for Their Organic Solar Cells by Increasing Fluorine Substitution

To simultaneously improve both open-circuit voltage (V_oc) and short-circuit current density (J_sc) for organic solar cells, a novel D(A-π-Ar)₃ type of photovoltaic small molecules of TPA(F_xBT-T-3Cz)₃ was designed and synthesized, which contain central triphenylamine (TPA), terminal carbazole (Cz), armed fluorine-substituted benzothiadiazole (F_xBT, where x = 1 or 2), and bridged thiophene (T) units. A narrowed ultraviolet-visible absorption and a decreasing highest occupied molecular orbital energy level were observed from TPA(F₁BT-T-3Cz)₃ to TPA(F₂BT-T-3Cz)₃ with increasing fluorine substitution. However, the TPA(F₂BT-T-3Cz)₃/PC₇₁BM-based solar devices showed a rising V_oc of 1.01 V and an enhanced J_sc of 10.84 mA cm^-2 as well as a comparable power conversion efficiency of 4.81% in comparison to the TPA(F₁BT-T-3Cz)₃/PC₇₁BM-based devices. Furthermore, in comparison to the parent TPA(BT-T-3Cz)₃ molecule without fluorine substitution, the fluorine-substituted TPA(F_xBT-T-3Cz)₃ molecules exhibited significantly incremental V_oc and J_sc values in their bulk heterojunction organic solar cells, owing to fluorine incorporation in the electron-deficient benzothiadiazole unit.

Organic Optoelectronic Materials: Mechanisms and Applications

Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjugated polymers are considered, and their applications in organic solar cells, photodetectors, and photorefractive devices are discussed.

Investigation of Fluorination on Donor Moiety of Donor-Acceptor 4,7-Dithienylbenzothiadiazole-Based Conjugated Polymers toward Enhanced Photovoltaic Efficiency

It is known that fluorination on π-conjugated donor-acceptor (D-A) polymers can significantly affect the optoelectronic properties and fluorination on A moiety has been well established for design of efficient photovoltaic materials. For example, polymers based on 4,7-dithienyl-5,6-difluorobenzothiadiazole (DTffBT) have been intensively investigated and exhibited excellent performance, but the corresponding DTBT-based polymers without fluorine often display an unfavorable efficiency. With the purpose of improving photovoltaic efficiency of DTBT-based D-A polymers, we design three polymers PDTBT-TxfBT (x = 0, 1, 2) with fluorination on D moiety (TxfBT) and systematically investigate fluorination on the photophysical/electrochemical and photovoltaic properties. The results show that polymer solar cells (PSCs) based on PDTBT-TBT exhibit moderate power conversion efficiency (PCE) of 5.84%. However, the bis-fluorination on TffBT moiety (PDTBT-TffBT) can greatly enhance the molecular planarity and intermolecular interaction, improve the charge transport and heterojunction morphology, and further suppress the charge recombination losses. PSCs based on PDTBT-TffBT demonstrate obviously improved photovoltaic efficiency with the best PCE up to 7.53% without any processing additives, which ranks among the top DTBT-based PSCs. However, it should be noted that unsymmetrical fluorination on TfBT moiety (PDTBT-TfBT) impairs the regularity of polymer backbone and intermolecular interaction, increases the recombination losses, and seriously reduces the short-circuit current density and efficiency (5.44%). The results exhibit that fluorination on D moiety is a helpful strategy for design high-performance photovoltaic materials and the regularity of fluorination is crucial to improving efficiencies.

High-Performance Photovoltaic Polymers Employing Symmetry-Breaking Building Blocks

Two 1D-2D asymmetric benzodithiophenes (BDTs) as donor building blocks are designed and synthesized, combining the advantages of both 1D and 2D symmetric BDTs. The photovoltaic properties of the asymmetric BDT-based polymers are improved greatly in comparison with corresponding symmetric BDT-based polymers. This work provides a new approach to design prospective organic optoelectronic materials employing the symmetry-breaking strategy.

High-Performance Polymer Solar Cells Based on a Wide-Bandgap Polymer Containing Pyrrolo[3,4-f]benzotriazole-5,7-dione with a Power Conversion Efficiency of 8.63

A novel donor-acceptor type conjugated polymer based on a building block of 4,8-di(thien-2-yl)-6-octyl-2-octyl-5H-pyrrolo[3,4-f]benzotriazole-5,7(6H)-dione (TZBI) as the acceptor unit and 4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo-[1,2-b:4,5-b']dithiophene as the donor unit, named as PTZBIBDT, is developed and used as an electron-donating material in bulk-heterojunction polymer solar cells. The resulting copolymer exhibits a wide bandgap of 1.81 eV along with relatively deep highest occupied molecular orbital energy level of -5.34 eV. Based on the optimized processing conditions, including thermal annealing, and the use of a water/alcohol cathode interlayer, the single-junction polymer solar cell based on PTZBIBDT:PC71BM ([6,6]-phenyl-C71-butyric acid methyl ester) blend film affords a power conversion efficiency of 8.63% with an open-circuit voltage of 0.87 V, a short circuit current of 13.50 mA cm-2, and a fill factor of 73.95%, which is among the highest values reported for wide-bandgap polymers-based single-junction organic solar cells. The morphology studies on the PTZBIBDT:PC71BM blend film indicate that a fibrillar network can be formed and the extent of phase separation can be mani-pulated by thermal annealing. These results indicate that the TZBI unit is a very promising building block for the synthesis of wide-bandgap polymers for high-performance single-junction and tandem (or multijunction) organic solar cells.