Single-layer transition metal dichalcogenide nanosheet-based nanosensors for rapid, sensitive, and multiplexed detection of DNA

Thermal Relaxation in Janus Transition Metal Dichalcogenide Bilayers

In this work, we employ molecular dynamics simulations with semi-empirical interatomic potentials to explore heat dissipation in Janus transition metal dichalcogenides (JTMDs). The middle atomic layer is composed of either molybdenum (Mo) or tungsten (W) atoms, and the top and bottom atomic layers consist of sulfur (S) and selenium (Se) atoms, respectively. Various nanomaterials have been investigated, including both pristine JTMDs and nanostructures incorporating inner triangular regions with a composition distinct from the outer bulk material. At the beginning of our simulations, a temperature gradient across the system is imposed by heating the central region to a high temperature while the surrounding area remains at room temperature. Once a steady state is reached, characterized by a constant energy flux, the temperature control in the central region is switched off. The heat attenuation is investigated by monitoring the characteristic relaxation time (τav) of the local temperature at the central region toward thermal equilibrium. We find that SMoSe JTMDs exhibit thermal attenuation similar to conventional TMDs (τav~10-15 ps). On the contrary, SWSe JTMDs feature relaxation times up to two times as high (τav~14-28 ps). Forming triangular lateral heterostructures in their surfaces leads to a significant slowdown in heat attenuation by up to about an order of magnitude (τav~100 ps).

A "signal off-on" fluorescence bioassay based on 2D-MoS2-tetrahedral DNA bioconjugate for rapid virus detection

In this work we present the preparation of a 2D molybdenum disulphide nanosheets (2D-MoS2) and tetrahedral DNA nanostructures (TDNs) bioconjugate, and its application to the development of a bioassay for rapid and easy virus detection. The bioconjugate has been prepared by using TDNs carrying the capture probe labelled with 6-carboxyfluoresceine (6-FAM). As case of study to assess the utility of the assay developed, we have chosen the SARS-CoV-2 virus. Hence, as probe we have used a DNA sequence complementary to a region of the SARS-CoV-2 ORF1ab gene (TDN-ORF-FAM). This 6-FAM labelled capture probe is located on the top vertex of the tetrahedral DNA nanostructure, the three left vertices of TDNs have a thiol group. These TDNs are bounded to 2D-MoS2 surface through the three thiol groups, allowing the capture probe to be oriented to favour the biorecognition reaction with the analyte. This biorecognition resulting platform has finally been challenged to the detection of the SARS-CoV-2 ORF1ab gene sequence as the target model by measuring fluorescence before and after the hybridization event with a detection limit of 19.7fM. Furthermore, due to high sensitivity of the proposed methodology, it has been applied to directly detect the virus in nasopharyngeal samples of infected patients without the need of any amplification step. The developed bioassay has a wide range of applicability since it can be applied to the detection of any pathogen by changing the probe corresponding to the target sequence. Thus, a novel, hands-on strategy for rapid pathogen detection has proposed and has a high potential application value in the early diagnosis of infections causes by virus or bacteria.

Quantum Material-Based Self-Propelled Microrobots for the Optical "On-the-Fly" Monitoring of DNA

Quantum dot-based materials have been found to be excellent platforms for biosensing and bioimaging applications. Herein, self-propelled microrobots made of graphene quantum dots (GQD-MRs) have been synthesized and explored as unconventional dynamic biocarriers toward the optical "on-the-fly" monitoring of DNA. As a first demonstration of applicability, GQD-MRs have been first biofunctionalized with a DNA biomarker (i.e., fluorescein amidite-labeled, FAM-L) via hydrophobic π-stacking interactions and subsequently exposed toward different concentrations of a DNA target. The biomarker-target hybridization process leads to a biomarker release from the GQD-MR surface, resulting in a linear alteration in the fluorescence intensity of the dynamic biocarrier at the nM range (1-100 nM, R2 = 0.99), also demonstrating excellent selectivity and sensitivity, with a detection limit as low as 0.05 nM. Consequently, the developed dynamic biocarriers, which combine the appealing features of GQDs (e.g., water solubility, fluorescent activity, and supramolecular π-stacking interactions) with the autonomous mobility of MRs, present themselves as potential autonomous micromachines to be exploited as highly efficient and sensitive "on-the-fly" biosensing systems. This method is general and can be simply customized by tailoring the biomarker anchored to the GQD-MR's surface.

A designed DNA/amino acid amphiphile-based supramolecular oxidase-mimetic catalyst for colorimetric DNA detection

DNA is self-assembled with Fmoc-amino acids and Cu2+ to construct a supramolecular catechol oxidase-mimetic catalyst, which exhibits remarkable activity in catalyzing colorimetric reactions. This catalytic system is used for the detection of DNA hybridization with a high selectivity and a low detection limit.

Recent Progress in Transition Metal Dichalcogenides for Electrochemical Biomolecular Detection

Advances in the field of nanobiotechnology are largely due to discoveries in the field of materials. Recent developments in the field of electrochemical biosensors based on transition metal nanomaterials as transducer elements have been beneficial as they possess various functionalities that increase surface area and provide well-defined active sites to accommodate elements for rapid detection of biomolecules. In recent years, transition metal dichalcogenides (TMDs) have become the focus of interest in various applications due to their considerable physical, chemical, electronic, and optical properties. It is worth noting that their unique properties can be modulated by defect engineering and morphology control. The resulting multifunctional TMD surfaces have been explored as potential capture probes for the rapid and selective detection of biomolecules. In this review, our primary focus is to delve into the synthesis, properties, design, and development of electrochemical biosensors that are based on transition metal dichalcogenides (TMDs) for the detection of biomolecules. We aim to explore the potential of TMD-based electrochemical biosensors, identify the challenges that need to be overcome, and highlight the opportunities for further future development.

2D Nanomaterials and Their Drug Conjugates for Phototherapy and Magnetic Hyperthermia Therapy of Cancer and Infections

Photothermal therapy (PTT) and magnetic hyperthermia therapy (MHT) using 2D nanomaterials (2DnMat) have recently emerged as promising alternative treatments for cancer and bacterial infections, both important global health challenges. The present review intends to provide not only a comprehensive overview, but also an integrative approach of the state-of-the-art knowledge on 2DnMat for PTT and MHT of cancer and infections. High surface area, high extinction coefficient in near-infra-red (NIR) region, responsiveness to external stimuli like magnetic fields, and the endless possibilities of surface functionalization, make 2DnMat ideal platforms for PTT and MHT. Most of these materials are biocompatible with mammalian cells, presenting some cytotoxicity against bacteria. However, each material must be comprehensively characterized physiochemically and biologically, since small variations can have significant biological impact. Highly efficient and selective in vitro and in vivo PTTs for the treatment of cancer and infections are reported, using a wide range of 2DnMat concentrations and incubation times. MHT is described to be more effective against bacterial infections than against cancer therapy. Despite the promising results attained, some challenges remain, such as improving 2DnMat conjugation with drugs, understanding their in vivo biodegradation, and refining the evaluation criteria to measure PTT or MHT effects.

Intrinsic half-metallicity in two-dimensional Cr2TeX2 (X = I, Br, Cl) monolayers

Two-dimensional (2D) materials with intrinsic half-metallicity at or above room temperature are important in spin nanodevices. Nevertheless, such 2D materials in experiment are still rarely realized. In this work, a new family of 2D Cr2TeX2 (X = I, Br, Cl) monolayers has been predicted using first-principles calculations. The monolayer is made of five atomic sublayers with ABCAB-type stacking along the perpendicular direction. It is found that the energies for all the ferromagnetic (FM) half-metallic states are the lowest. The phonon spectrum calculations and molecular dynamics simulations both demonstrate that the FM states are stable, indicating the possibility of experimentally obtaining the 2D Cr2TeX2 monolayers with half-metallicity. The Curie temperatures from Monte Carlo simulations are 486, 445, and 451 K for Cr2TeI2, Cr2TeBr2, and Cr2TeCl2 monolayers, respectively, and their half-metallic bandgaps are 1.72, 1.86 and 1.90 eV. The corresponding magnetocrystalline anisotropy energies (MAEs) are about 1185, 502, 899 μeV per Cr atom for Cr2TeX2 monolayers, in which the easy axes are along the plane for the Cr2TeBr2 and Cr2TeCl2 monolayers, but being out of the plane in the Cr2TeI2. Our study implies the potential application of the 2D Cr2TeX2 (X = I, Br, Cl) monolayers in spin nanodevices.

A graphitic nano-onion/molybdenum disulfide nanosheet composite as a platform for HPV-associated cancer-detecting DNA biosensors

An electrochemical DNA sensor that can detect human papillomavirus (HPV)-16 and HPV-18 for the early diagnosis of cervical cancer was developed by using a graphitic nano-onion/molybdenum disulfide (MoS₂) nanosheet composite. The electrode surface for probing DNA chemisorption was prepared via chemical conjugation between acyl bonds on the surfaces of functionalized nanoonions and the amine groups on functionalized MoS₂ nanosheets. The cyclic voltammetry profile of an 1:1 nanoonion/MoS₂ nanosheet composite electrode had an improved rectangular shape compared to that of an MoS₂ nanosheet elecrode, thereby indicating the amorphous nature of the nano-onions with sp₂ distancing curved carbon layers that provide enhanced electronic conductivity, compared to MoS₂ nanosheet only. The nanoonion/MoS₂ sensor for the DNA detection of HPV-16 and HPV-18, respectively, was measured at high sensitivity through differential pulse voltammetry (DPV) in the presence of methylene blue (MB) as a redox indicator. The DPV current peak was lowered after probe DNA chemisorption and target DNA hybridization because the hybridized DNA induced less effective MB electrostatic intercalation due to it being double-stranded, resulting in a lower oxidation peak. The nanoonion/MoS₂ nanosheet composite electrodes attained higher current peaks than the MoS₂ nanosheet electrode, thereby indicating a greater change in the differential peak probably because the nanoonions enhanced conductive electron transfer. Notably, both of the target DNAs produced from HPV-18 and HPV-16 Siha and Hela cancer cell lines were effectively detected with high specificity. The conductivity of MoS₂ improved by complexation with nano-onions provides a suitable platform for electrochemical biosensors for the early diagnosis of many ailments in humans.

Chromium hydroxide nanoparticles-based fluorescent aptameric sensing for sensitive patulin detection: The significance of nanocrystal and morphology modulation

The widespread of patulin (PAT) and its potential hazards to human health call for alternative rapid assays to monitor it in food and the environment. Herein, we prepared chromium hydroxide [Cr(OH)₃] nanoparticles via a one-pot chemical precipitation strategy and used them to fabricate a turn-on fluorescent aptasensor employing a morphological effect for sensitive PAT detection. Three Cr(OH)₃ nanoparticle structures were synthesized by changing the solvent, and their structures and physicochemical properties were investigated. Then, we evaluated the effects of morphological structures on the fluorescence quenching-recovery capability of Cr(OH)₃ nanoparticles before and after incubation with PAT. We found that the Cr(OH)₃-3 nanoparticles efficiently absorbed the fluorescence dye 6-carboxyfluorescein labeled aptamer (FAM-Apt) and quenched the fluorophore through photoinduced electron transfer. Under optimal experimental conditions, the turn-on fluorescent aptasensor for PAT determination displayed two linear ranges (0.01-10 ng/mL and 1-200 ng/mL) with a low detection limit of 7.3 pg/mL. Moreover, the proposed aptasensor had no cross-reactivity with interferents that usually coexist with PAT and can be used to detect PAT in apple juices accurately. The results of the as-fabricated method were not significantly different from the high-performance liquid chromatography. Hence, we demonstrated that different Cr(OH)₃ nanoparticles can be prepared by changing reaction conditions, and provided a novel strategy to improve the detection performance of fluorescent aptasensor by changing the morphological structure and crystalline properties of nano-quenchers.

Fluorescence off-on nanosensor based on MoS2 nanosheets and oligonucleotides for the alternative detection of mercury(II) ions or silver(I) ions

As traditional methods for detection of heavy metal pollution in water involve complex procedures and require expensive equipment, there is a great deal of interest in the development of rapid and simple methods for determining heavy metal ions in water. Here, a nanobiosensor based on molybdenum disulphide (MoS₂) nanosheets and fluorophore (FAM) labeled oligonucleotides was proposed, and fluorescence spectroscopy was adopted for detection of Hg²⁺ or Ag⁺ ions in aqueous solution. The principle underlying detection by the sensor involves the formation of T-Hg²⁺-T or C-Ag⁺-C mismatches by single-stranded DNA (ssDNA) rich in thymine (T) or cytosine (C), thereby forming stable double-stranded DNA (dsDNA) structures. By exploiting the different adsorption capacity of MoS₂ nanosheets for ssDNA and dsDNA, when oligonucleotides were in a single chain state, MoS₂ nanosheets possessed a strong adsorption capacity for ssDNA, resulting in fluorescence quenching of FAM. After the addition of Hg²⁺ or Ag⁺, ssDNA formed double chains structure, the fluorescence recovered due to the weak adsorption capacity of MoS₂ nanosheets for dsDNA. Along this line, an "off-on" mode fluorescence nanobiosensor was designed to alternatively detect these two heavy metal ions in water. The sensor showed high sensitivity and excellent selectivity for both Hg²⁺ and Ag⁺ ions, with minimum detection limits of 6.8 nM and 8.9 nM, respectively.

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Atomic layer deposition (ALD)-constructed TaS2nanoflakes for cancer-related nucleolin detection

Sensitive detection of nucleolin (NCL) is of great significance for the early diagnosis of cancer. In this work, as a new type of two-dimensional (2D) transition metal dichalcogenides (TMDCs), TaS₂nanoflakes (NFs) were precisely constructed by atomic layer deposition (ALD) on carbon fiber paper (CFP) with high specific surface area.In situobservation showed that the nucleation and growth of TaS₂nanoflakes were precisely controlled by the number of ALD cycles, thereby regulating their electrochemical properties. The electrochemical performance of TaS₂NFs was observed in depth, and compared with that of traditional 2D TMDCs. Due to the high surface area and conductivity, anodic/cathodic current of ∼1570μA of TaS₂NFs/CFP can be obtained. Subsequently, an electrochemical biosensor based on ALD-constructed TaS₂NFs/CFP for cancer-related NCL detection was fabricated. Due to the excellent electrochemical performance of TaS₂NFs/CFP, ultrasensitive detection of NCL in the linear range of 0.1 pM-10 nM with a detection limit of 0.034 pM was achieved.

Direct fabrication of NbS2 nanoflakes on carbon fibers by atomic layer deposition for ultrasensitive cardiac troponin I detection

The sensitive detection of cardiac troponin I (cTnI) is of great significance for the early diagnosis of acute myocardial infarction (AMI). Herein, in order to fabricate an electrochemical biosensor for ultrasensitive cTnI detection, atomic layer deposition (ALD) was employed to directly deposit NbS₂ nanoflakes (NFs) on carbon fiber paper (CFP). Due to the self-limiting reaction of ALD, NbS₂NFs were deposited uniformly and accurately on the surface of carbon fibers by controlling the number of ALD cycles, which ensured ultrasensitive detection. Precise regulation of the nanoscale morphology and electrochemical performance of NbS₂ nanoflakes via ALD cycles was observed in depth. Owing to the high surface area and conductivity, an anodic/cathodic current of ∼3.01 mA of NbS₂NFs/CFP can be obtained. Subsequently, an electrochemical biosensor based on the excellent performance of NbS₂NFs/CFP was fabricated. The ultrasensitive detection of cTnI in a linear range of 1 fM to 0.1 nM with a detection limit of 0.32 fM was achieved.

Two-Dimensional Transition Metal Dichalcogenide Based Biosensors: From Fundamentals to Healthcare Applications

There has been an exponential surge in reports on two-dimensional (2D) materials ever since the discovery of graphene in 2004. Transition metal dichalcogenides (TMDs) are a class of 2D materials where weak van der Waals force binds individual covalently bonded X-M-X layers (where M is the transition metal and X is the chalcogen), making layer-controlled synthesis possible. These individual building blocks (single-layer TMDs) transition from indirect to direct band gaps and have fascinating optical and electronic properties. Layer-dependent opto-electrical properties, along with the existence of finite band gaps, make single-layer TMDs superior to the well-known graphene that paves the way for their applications in many areas. Ultra-fast response, high on/off ratio, planar structure, low operational voltage, wafer scale synthesis capabilities, high surface-to-volume ratio, and compatibility with standard fabrication processes makes TMDs ideal candidates to replace conventional semiconductors, such as silicon, etc., in the new-age electrical, electronic, and opto-electronic devices. Besides, TMDs can be potentially utilized in single molecular sensing for early detection of different biomarkers, gas sensors, photodetector, and catalytic applications. The impact of COVID-19 has given rise to an upsurge in demand for biosensors with real-time detection capabilities. TMDs as active or supporting biosensing elements exhibit potential for real-time detection of single biomarkers and, hence, show promise in the development of point-of-care healthcare devices. In this review, we provide a historical survey of 2D TMD-based biosensors for the detection of bio analytes ranging from bacteria, viruses, and whole cells to molecular biomarkers via optical, electronic, and electrochemical sensing mechanisms. Current approaches and the latest developments in the study of healthcare devices using 2D TMDs are discussed. Additionally, this review presents an overview of the challenges in the area and discusses the future perspective of 2D TMDs in the field of biosensing for healthcare devices.

Tungsten-based Nanomaterials in the Biomedical Field: A Bibliometric Analysis of Research Progress and Prospects

Tungsten-based nanomaterials (TNMs) with diverse nanostructures and unique physicochemical properties have been widely applied in the biomedical field. Although various reviews have described the application of TNMs in specific biomedical fields, there are still no comprehensive studies that summarize and analyze research trends of the field as a whole. To identify and further promote the development of biomedical TNMs, a bibliometric analysis method is used to analyze all relevant literature on this topic. First, general bibliometric distributions of the dataset by year, country, institute, referenced source, and research hotspots are recognized. Next, a comprehensive review of the subjectively recognized research hotspots in various biomedical fields, including biological sensing, anticancer treatments, antibacterials, and toxicity evaluation, is provided. Finally, the prospects and challenges of TNMs are discussed to provide a new perspective for further promoting their development in biomedical research.

Rational assembly of RGD/MoS2/Doxorubicin nanodrug for targeted drug delivery, GSH-stimulus release and chemo-photothermal synergistic antitumor activity

Herein, we present the facile design and construction of a nanodrug system integrating targeted drug delivery and synergistic chemo-photothermal antitumor activity. MoS₂ nanosheets were synthesized and modified by α_νβ₃ integrin binding peptide (Arg-Gly-Asp, RGD) using lipoic acid functionalized polyethylene glycol (LA-PEG-COOH), forming a well dispersed and targeted delivery nanocarrier. Further, covalent coupling of antitumor drug, thiolated doxorubicin (DOX) via disulfide linkage resulted in a novel nanodrug, RGD/MoS₂/DOX. The prepared nanocarrier showed favorable stability, biocompatibility and photothermal conversion efficiency. Fluorescence imaging revealed that Hela cells could endocytose far more nanodrug than H9c2 normal myocardial cells due to the targeted delivery characteristic. Particularly, GSH-induced disulfide bond cleavage facilitated the effective release of DOX from the nanodrug in the tumor microenvironment. The survival rate of Hela cells incubated with the nanodrug for 48 h was 22.2 ± 1.2%, which dramatically reduced to 8.9 ± 1.4% in combination with 808 nm NIR irradiation, demonstrating powerful photothermal induced tumor-killing efficacy. In contrast, the survival rates of H9c2 cells treated by the nanodrug and free DOX were 68.5 ± 2.6% and 6.7 ± 2.6%, respectively, an indication of the notably alleviated cardiotoxicity of the designed nanodrug. The cell apoptosis experiment further verified the synergistic chemo-photothermal effect, thus paving a way toward design of high-efficiency and low-toxicity antitumor nanodrug.

Split G-Quadruplexes Enhance Nanopore Signals for Simultaneous Identification of Multiple Nucleic Acids

Assembly of DNA structures based on hybridization like split G-quadruplex (GQ) have great potential for the base-pair specific identification of nucleic acid targets. Herein, we combine multiple split G-quadruplex (GQ) assemblies on designed DNA nanostructures (carrier) with a solid-state nanopore sensing platform. The split GQ probes recognize various nucleic acid sequences in a parallel assay that is based on glass nanopore analysis of molecular structures. Specifically, we split a GQ into two asymmetric parts extended with sequences complementary to the target. The longer G-segment is in solution, and the shorter one is on a DNA carrier. If the target is present, the two separate GQ parts will be brought together to facilitate the split GQ formation and enhance the nanopore signal. We demonstrated detection of multiple target sequences from different viruses with low crosstalk. Given the programmability of this DNA based nanopore sensing platform, it is promising in biosensing.

A Review of Transition Metal Dichalcogenides-Based Biosensors

Transition metal dichalcogenides (TMDCs) are widely used in biosensing applications due to their excellent physical and chemical properties. Due to the properties of biomaterial targets, the biggest challenge that biosensors face now is how to improve the sensitivity and stability. A lot of materials had been used to enhance the target signal. Among them, TMDCs show excellent performance in enhancing biosensing signals because of their metallic and semi-conducting electrical capabilities, tunable band gap, large specific surface area and so on. Here, we review different functionalization methods and research progress of TMDCs-based biosensors. The modification methods of TMDCs for biosensor fabrication mainly include two strategies: non-covalent and covalent interaction. The article summarizes the advantages and disadvantages of different modification strategies and their effects on biosensing performance. The authors present the challenges and issues that TMDCs need to be addressed in biosensor applications. Finally, the review expresses the positive application prospects of TMDCs-based biosensors in the future.

Recent Progress on Highly Selective and Sensitive Electrochemical Aptamer-based Sensors

Highly selective, sensitive, and stable biosensors are essential for the molecular level understanding of many physiological activities and diseases. Electrochemical aptamer-based (E-AB) sensor is an appealing platform for measurement in biological system, attributing to the combined advantages of high selectivity of the aptamer and high sensitivity of electrochemical analysis. This review summarizes the latest development of E-AB sensors, focuses on the modification strategies used in the fabrication of sensors and the sensing strategies for analytes of different sizes in biological system, and then looks forward to the challenges and prospects of the future development of electrochemical aptamer-based sensors.

One-pot synthesis of stable and functional hydrophilic CsPbBr3 perovskite quantum dots for "turn-on" fluorescence detection of Mycobacterium tuberculosis

All-inorganic CsPbBr3 perovskite quantum dots (QDs) are widely studied owing to their excellent optoelectronic properties; however, they are usually hydrophobic and unstable in water and thus their biomedical applications are seriously limited. In this study, stable and hydrophilic CsPbBr3 QDs functionalized with carboxyl groups (CsPbBr3-COOH QDs) were prepared in one-pot with the aid of new ligands amino-poly(ethylene glycol)-carboxyl and perfluorooctyltriethoxylsilane. The aqueous solution of CsPbBr3-COOH QDs maintained the initial fluorescence intensity after 8 days of storage; the free carboxyl groups on the surface of CsPbBr3-COOH QDs were covalently conjugated with amino-terminal DNA to construct CsPbBr3 QDs-DNA probes for subsequent application. Then, a biosensing platform utilizing fluorescence resonance energy transfer between hydrophilic CsPbBr3 QDs-DNA and MoS2 nanosheets was developed for the sensitive and selective detection of the Mycobacterium tuberculosis DNA with a low limit of detection of 51.9 pM and the identification of drug-resistant clinical strains. This study advances the preparation of hydrophilic carboxyl-functionalized CsPbBr3 QDs with enhanced stability and extends their application in biomolecule detection.

Multidimensional Imaging Reveals Mechanisms Controlling Multimodal Label-Free Biosensing in Vertical 2DM-Heterostructures

Two-dimensional materials and their van der Waals heterostructures enable a large range of applications, including label-free biosensing. Lattice mismatch and work function difference in the heterostructure material result in strain and charge transfer, often varying at a nanometer scale, that influence device performance. In this work, a multidimensional optical imaging technique is developed in order to map subdiffractional distributions for doping and strain and understand the role of those for modulation of the electronic properties of the material. As an example, vertical heterostructures comprised of monolayer graphene and single-layer flakes of transition metal dichalcogenide MoS₂ were fabricated and used for biosensing. Herein, the optical label-free detection of doxorubicin, a common cancer drug, is reported via three independent optical detection channels (photoluminescence shift, Raman shift, and graphene enhanced Raman scattering). Non-uniform broadening of components of multimodal signal correlates with the statistical distribution of local optical properties of the heterostructure. Multidimensional nanoscale imaging allows one to reveal the physical origin for such a local response and propose the best strategy for the mitigation of materials variability and future device fabrication, enabling multiplexed biosensing.

Direct Detection of Inhomogeneity in CVD-Grown 2D TMD Materials via K-Means Clustering Raman Analysis

It is known that complex growth environments often induce inhomogeneity in two-dimensional (2D) materials and significantly restrict their applications. In this paper, we proposed an efficient method to analyze the inhomogeneity of 2D materials by combination of Raman spectroscopy and unsupervised k-means clustering analysis. Taking advantage of k-means analysis, it can provide not only the characteristic Raman spectrum for each cluster but also the cluster spatial maps. It has been demonstrated that inhomogeneities and their spatial distributions are simultaneously revealed in all CVD-grown MoS₂, WS₂ and WSe₂ samples. Uniform p-type doping and varied tensile strain were found in polycrystalline monolayer MoS₂ from the grain boundary and edges to the grain center (single crystal). The bilayer MoS₂ with AA and AB stacking are shown to have relatively uniform p-doping but a gradual increase of compressive strain from center to the periphery. Irregular distribution of 2LA(M)/E2g1 mode in WS₂ and E2g1 mode in WSe₂ is revealed due to defect and strain, respectively. All the inhomogeneity could be directly characterized in color-coded Raman imaging with correlated characteristic spectra. Moreover, the influence of strain and doping in the MoS₂ can be well decoupled and be spatially verified by correlating with the clustered maps. Our k-means clustering Raman analysis can dramatically simplify the inhomogeneity analysis for large Raman data in 2D materials, paving the way towards direct evaluation for high quality 2D materials.

2D and 3D Covalent Organic Frameworks: Cutting-Edge Applications in Biomedical Sciences

Covalent organic frameworks (COFs) are crystalline porous organic structures with two- or three-dimensional (2D or 3D) features and composed of building blocks being connected via covalent bonds. The manifold applications of COFs in optoelectronic devices, energy conversion and storage, adsorption, separation, sensing, organocatalysis, photocatalysis, electrocatalytic reactions, and biomedicine are increasing because of their notable intrinsic features such as large surface area, porosity, designable structure, low density, crystallinity, biocompatibility, and high chemical stability. These properties have rendered 2D and 3D COF-based materials as desirable entities for drug delivery, gene delivery, photothermal therapy, photodynamic therapy, combination therapy, biosensing, bioimaging, and anticancer activities. Herein, different reactions and methods for the synthesis of 2D and 3D COFs are reviewed with special emphasis on the construction and state-of-the-art progress pertaining to the biomedical applications of 2D and 3D COFs of varying shapes, sizes, and structures. Specifically, stimuli-responsive COFs-based systems and targeted drug delivery approaches are summarized.

Synthesis and application of 0D/2D nanocomposite for the nanomolar level detection of antiandrogen drug

In this work, Sr@FeNi-S nanostructures were synthesized through chemical approach. The as synthesized nanostructures were explored for the fabrication of a nanocomposite based potentiometric flutamide (FLU) sensor. A conducting graphene...

High performance and gate-controlled GeSe/HfS2 negative differential resistance device

A novel and astonishing p-GeSe/n-HfS2 NDR device shows a high value for the peak-to-valley current ratio in the range of 5.8.

Femtosecond ultrafast pulse generation with high-quality 2H-TaS2 nanosheets via top-down empirical approach

Tantalum disulfide (TaS₂), an emerging group VB transition metal dichalcogenide, with unique layered structure, rich phase diagrams, metallic behavior, higher carrier concentration and mobility is emerging as a prototype for revealing basic physical phenomena and developing practical applications. However, its photonics properties and even engineering-related processes are still rare. Here, the top-down experiment demonstration, including synthesis, thickness optimization and nonlinear optical application, has been reported. In addition, the ultrafast (∼373 fs) erbium-doped fiber pulse with a small time-bandwidth product (∼0.34) and long-term stability (∼25 days) was realized using the nonlinear absorption properties of the high-quality 2H-TaS₂ nanosheet. These results suggest an experimental route for further ultrafast photonics exploration based on metallic transition metal dichalcogenides.

An upgraded 2D nanosheet-based FRET biosensor: insights into avoiding background and eliminating effects of background fluctuations

We demonstrated a new class of 2D nanosheet-based FRET biosensor utilizing vertically oriented MoS₂ nanosheets on a magnetic nanocarrier. Compared with the non-separated biosensor under identical conditions, this upgraded one can avoid the background signal of the system and eliminate the effects of background fluctuations, which produces more excellent detection methods.

DNAzyme-Functionalized Nanomaterials: Recent Preparation, Current Applications, and Future Challenges

DNAzyme-nanomaterial bioconjugates are a popular hybrid and have received major attention for diverse biomedical applications, such as bioimaging, biosensor development, cancer therapy, and drug delivery. Therefore, significant efforts are made to develop different strategies for the preparation of inorganic and organic nanoparticles (NPs) with specific morphologies and properties. DNAzymes functionalized with metal-organic frameworks (MOFs), gold nanoparticles (AuNPs), graphene oxide (GO), and molybdenum disulfide (MoS₂ ) are introduced and summarized in detail in this review. Moreover, the focus is on representative examples of applications of DNAzyme-nanomaterials over recent years, especially in bioimaging, biosensing, phototherapy, and stimulation response delivery in living systems, with their several advantages and drawbacks. Finally, the perspective regarding the future directions of research addressing these challenges is also discussed and highlighted.

Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor

Carbon based aerogels are special solid-state materials comprised of interconnected networks of 3D nanostructures with high amount of air-filled nanoporous. They expand the structural properties along with physicochemical characteristics of nanoscale construction blocks to macroscale, and incorporate distinctive attributes of aerogels, like large surface area, high porosity, and low density, with particular features of the different constituents. These features impart aerogels with rapid response signal, high selectivity, and ultra-sensitivity for sensing diverse targets in biomedical media. This has prompted researchers to develop a variety of aerogel-based sensors with encouraging achievements. Hence, this work outlines sensing applications of aerogel-based sensors with a comprehensive overview on the carbon aerogel hybrid materials and their analytical performances. Authors tried to list advantages and limitations of the developed approach and introduced more potent research for possible devices designing. We also point out some challenges and future perspectives related to the improvement of high-efficiency aerogel-based sensors.

A simple "signal off-on" fluorescence nanoplatform for the label-free quantification of exosome-derived microRNA-21 in lung cancer plasma

A simple nanoplatform based on molybdenum disulfide (MoS₂) nanosheets, a fluorescence quencher (signal off), and a hybridization chain reaction (HCR) signal amplification (signal on) used for the enzyme-free, label-free, and low-background signal quantification of microRNA-21 in plasma exosome is reported. According to the sequence of microRNA-21, carboxy-fluorescein (FAM)-labeled hybridization probe 1 (FAM-H1) and hybridization probes 2 (FAM-H2) were designed with excitation maxima at 488 nm and emission maxima at 518 nm. MoS₂ nanosheets could adsorb FAM-H1 and FAM-H2 and quenched their fluorescence signals to reduce the background signal. However, HCR was triggered when microRNA-21 was present. Consequently, HCR products containing a large number of FAM fluorophores can emit a strong fluorescence at 518 nm and could realize the detection of microRNA-21 as low as 6 pmol/L and had a wide linear relation of 0.01-25 nmol/L. This assay has the ability of single-base mismatch recognition and could identify microRNA-21 with high specificity. Most importantly, this approach was successfully applied to the detection of plasma exosomal microRNA-21 in patients with lung cancer, and it is proposed that other targets can also be detected by changing the FAM-H1 and FAM-H2 corresponding to the target sequence. Thus, a novel, hands-on strategy for liquid biopsy was proposed and has a potential application value in the early diagnosis of lung cancer.

Zeptomole Imaging of Cytosolic MicroRNA Cancer Biomarkers with A Light-Controlled Nanoantenna

Detecting and quantifying intracellular microRNAs (miRNAs) are a critical step in resolving a cancer diagnostic and resolving the ensemble of gene products that orchestrate the living state of cells. However, the nanoprobe for detecting low abundance miRNAs in cell cytosol is restricted by either the "one-to-one" signal-trigger model or difficulty for cytosol delivery. To address these challenges, we designed a light-harvesting nanoantenna-based nanoprobe, which directs excitation energy to a single molecule to sensitively detect cytosolic miRNA. With light irradiation, the light-harvesting nanoantenna effectively disrupted lysosomal structures by generation of reactive oxygen species, substantially achieved cytosol delivery. The nanoantenna containing > 4000 donor dyes can efficiently transfer excitation energy to one or two acceptors with 99% efficiency, leading to unprecedented signal amplification and biosensing sensitivity. The designed nanoantenna can quantify cytosolic miR-210 at zeptomolar level. The fluorescence lifetime of the donor exhibited good relationship with miR-210 concentration in the range of 0.032 to 2.97 amol/ngRNA. The zeptomole sensitivity of nanoantenna provides accurate bioimaging of miR-210 both in multiple cell lines and in vivo assay, which creates a pathway for the creation of miRNA toolbox for quantitative epigenetics and personalized medicine.

Recent Advances in Two-Dimensional Transition Metal Dichalcogenide Nanocomposites Biosensors for Virus Detection before and during COVID-19 Outbreak

The deadly Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) outbreak has become one of the most challenging pandemics in the last century. Clinical diagnosis reports a high infection rate within a large population and a rapid mutation rate upon every individual infection. The polymerase chain reaction has been a powerful and gold standard molecular diagnostic technique over the past few decades and hence a promising tool to detect the SARS-CoV-2 nucleic acid sequences. However, it can be costly and involved in complicated processes with a high demand for on-site tests. This pandemic emphasizes the critical need for designing cost-effective and fast diagnosis strategies to prevent a potential viral source by ultrasensitive and selective biosensors. Two-dimensional (2D) transition metal dichalcogenide (TMD) nanocomposites have been developed with unique physical and chemical properties crucial for building up nucleic acid and protein biosensors. In this review, we cover various types of 2D TMD biosensors available for virus detection via the mechanisms of photoluminescence/optical, field-effect transistor, surface plasmon resonance, and electrochemical signals. We summarize the current state-of-the-art applications of 2D TMD nanocomposite systems for sensing proteins/nucleic acid from different types of lethal viruses. Finally, we identify and discuss the advantages and limitations of TMD-based nanocomposites biosensors for viral recognition.

Nonmetallic SERS-based immunosensor byintegrating MoS2 nanoflower and nanosheet towards the direct serum detection of carbohydrate antigen 19-9

Recently, nonmetallic substrates have stimulated great interest in surface-enhanced Raman scattering (SERS)-based immunoassay owing to their good uniformity, stability, and biocompatibility. In this context, a novel nonmetallic SERS-based immunoassay mediated by two-dimensional molybdenum disulfide (MoS₂) was delivered for the sensitive and specific monitoring of carbohydrate antigen 19-9 (CA19-9). The effective enrichment of molecules on the large active surfaces of MoS₂ as well as potential 532-nm laser-induced charge transfer resonances between them engendered desirable enhancement factor values at the level of 10⁵. Intriguingly, a sandwich immunocomplex combined MoS₂ nanoflower and nanosheet exhibited not only a wide linear range from 5 × 10^-4 to 1 × 10² IU·mL^-1 but also a limit of detection as low as 3.43 × 10^-4 IU·mL^-1 towards CA19-9. More meaningful, the analytical result for clinical patient serum sample was basically compared with the conventional chemiluminescent immunoassay. Such a novel nonmetallic SERS-based immunosensor with desirable biocompatibility and sensitivity is promising for clinical diagnosis.

Noble metal-molybdenum disulfide nanohybrids as dual fluorometric and colorimetric sensor for hepatitis B virus DNA detection

Hepatitis B virus (HBV) infection is one of the global healthcare burdens, and its early diagnosis is crucial for the prevention of HBV-induced chronic hepatitis, liver fibrosis, cirrhosis, and hepatocellular carcinoma. Although different detection approaches have been reported, most of these methods either rely on sophisticated machines or procedures, which limit their use particularly in the high endemic, developing countries. In this work, we report a dual-sensing nanoplatform built on noble metal-molybdenum disulfide (MoS₂) nanohybrids, and this platform can detect the HBV DNA target through either fluorometric or colorimetric readouts. The design with the silver nanocluster (AgNC)-MoS₂ nanohybrid enables multiplex fluorescent detection, while the HBV DNA-regulated growth of platinum nanoparticles (PtNPs) on the MoS₂ nanosheets offers signal-on colorimetric detection. Both AgNC-MoS₂ and PtNP-MoS₂ nanohybrids show high sensitivity with pico-molar detection limit and single nucleotide specificity, even with the spiked human serum. Collectively, the proposed nanohybrids possess their potential in the use of early HBV diagnosis, particularly suitable for the high endemic areas with limited medical and instrumental supports.

Effects of Strain and Electric Field on Molecular Doping in MoSSe

Recently, synthesized Janus MoSSe monolayers have attracted tremendous attention in science and technology due to their novel properties and promising applications. In this work, we investigate their molecular adsorption-induced structural and electronic properties and tunable doping effects under biaxial strain and external electric field by first-principles calculations. We find an effective n-type or p-type doping in the MoSSe monolayer caused by noncovalent tetrathiafulvalene (TTF) or tetracyanoquinodimethane (TCNQ) molecular adsorption. Moreover, the concentration of doping carrier with respect to the S or Se side also exhibits Janus characteristics because of the electronegativity difference between S and Se atoms and the intrinsic dipole moment in the MoSSe monolayer. In particular, this n-type or p-type molecular doping effect can be flexibly tuned by biaxial strain or under external electric field. By analyzing the valence band maximum (VBM) and conduction band minimum (CBM) in the band structure of MoSSe/TTF under strain, the strain-tunable band gap of MoSSe and the n-type molecular doping effect is revealed. Further explanation of charge transfer between TTF or TCNQ and the MoSSe monolayer by an equivalent capacitor model shows that the superimposition of external electric field and molecular adsorption-induced internal electric field plays a crucial role in achieving a controllable doping concentration in the MoSSe monolayer.

Unique photoluminescence response of MoS2quantum dots over a wide range of As (III) in aqueous media

We report the solvothermal synthesis of MoS₂based quantum dots (QDs) and the performance evaluation of bare QDs for the detection of aqueous As (III) oxidative state at room temperature and neutral pH over a vast range (0.1-1000 ppb). Concentration-dependent photoluminescence (PL) of the QDs enhances up to 50 ppb and then suppresses till 1000 ppb. It shows two distinctive slopes for enhancement and suppression. The enhancement is possibly due to the passivation of trap states or defects. The formation of tiny glassy As₂S₃particles on the QD surface may be the possible reason for suppression. The pattern of optical absorption of QDs follows the similar patterns of PL. Still, it shows an enhanced absorbance in the near UV range below ≤300 nm, which increases with As (III) concentration up to 50 ppb and then decreases following the PL pattern. The MoS₂QDs were characterized by using transmission electron microscopy, x-ray diffraction, UV-Vis, and PL spectroscopy. The enhancement and suppression results were excellently fitted with the modified Stern-Volmer equation. The detection of arsenic is possible using these linear fit equations as calibration curves.

Size-dependent optical extinction of MoS2 nanosheets and their aptamer-induced dispersion behavior for the label-free detection of Escherichia coli O157:H7

For aptamer-modified nanomaterial biosensors label-free detection methods are desirable due to them being simple and low in cost. Among these methods, nanomaterial aggregation for signal conversion is common, using materials such as gold nanoparticles. However, for MoS2 nanosheets (MoS2-NSs), signal conversion of its aggregation is difficult, resulting in the limited development of its label-free sensing applications. Herein, for the first time, the extinction spectrum has been employed to quickly transform the signal of MoS2-NS aggregation and reveal the size-dependent extinction response of MoS2-NS aggregation. Moreover, the size-dependent optical extinction behavior of MoS2-NSs, using aptamers to induce the dispersion of the MoS2-NSs and greatly improve their ability to identify targets, is studied. Importantly, this method has been employed to achieve the label-free detection of Escherichia coli O157:H7. The present investigation shows the promising use of MoS2-NSs for the development of label-free detection.

Recent Advances in 2D Group VB Transition Metal Chalcogenides

2D materials have received considerable research interest owing to their abundant material systems and remarkable properties. Among them, 2D group VB transition metal chalcogenides (GVTMCs) stand out as emerging 2D metallic materials and significantly broaden the research scope of 2D materials. 2D GVTMCs have great advantages in electrical transport, 2D magnetism, charge density wave, sensing, catalysis, and charge storage, making them attractive in the fields of functional devices and energy chemistry. In this review, the recent progress of 2D GVTMCs is summarized systematically from fundamental properties, growth methodologies to potential applications. The challenges and prospects are also discussed for future research in this field.

Rationally Programming Nanomaterials with DNA for Biomedical Applications

DNA is not only a carrier of genetic information, but also a versatile structural tool for the engineering and self-assembling of nanostructures. In this regard, the DNA template has dramatically enhanced the scalability, programmability, and functionality of the self-assembled DNA nanostructures. These capabilities provide opportunities for a wide range of biomedical applications in biosensing, bioimaging, drug delivery, and disease therapy. In this review, the importance and advantages of DNA for programming and fabricating of DNA nanostructures are first highlighted. The recent progress in design and construction of DNA nanostructures are then summarized, including DNA conjugated nanoparticle systems, DNA-based clusters and extended organizations, and DNA origami-templated assemblies. An overview on biomedical applications of the self-assembled DNA nanostructures is provided. Finally, the conclusion and perspectives on the self-assembled DNA nanostructures are presented.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

Additive-Enhanced Exfoliation for High-Yield 2D Materials Production

The success of van-der-Waals electronics, which combine large-scale-deposition capabilities with high device performance, relies on the efficient production of suitable 2D materials. Shear exfoliation of 2D materials' flakes from bulk sources can generate 2D materials with low amounts of defects, but the production yield has been limited below industry requirements. Here, we introduce additive-assisted exfoliation (AAE) as an approach to significantly increase the efficiency of shear exfoliation and produce an exfoliation yield of 30%. By introducing micrometer-sized particles that do not exfoliate, the gap between rotor and stator was dynamically reduced to increase the achievable shear rate. This enhancement was applied to WS2 and MoS2 production, which represent two of the most promising 2D transition-metal dichalcogenides. Spectroscopic characterization and cascade centrifugation reveal a consistent and significant increase in 2D material concentrations across all thickness ranges. Thus, the produced WS2 films exhibit high thickness uniformity in the nanometer-scale and can open up new routes for 2D materials production towards future applications.

Flexoelectricity in atomic monolayers from first principles

We study the flexoelectric effect in fifty-four select atomic monolayers using ab initio Density Functional Theory (DFT). Specifically, considering representative materials from each of the Group III monochalcogenides, transition metal dichalcogenides (TMDs), Groups IV, III-V, and V monolayers, Group IV dichalcogenides, Group IV monochalcogenides, transition metal trichalcogenides (TMTs), and Group V chalcogenides, we perform symmetry-adapted DFT simulations to calculate transversal flexoelectric coefficients along the principal directions at practically relevant bending curvatures. We find that the materials demonstrate linear behavior and have similar coefficients along both principal directions, with values for TMTs being up to a factor of five larger than those of graphene. In addition, we find electronic origins for the flexoelectric effect, which increases with monolayer thickness, elastic modulus along the bending direction, and sum of polarizability of constituent atoms.

Pathogenic Virus Detection by Optical Nanobiosensors

The novel coronavirus pandemic is sweeping the world and causing global crises. The lack of effective methods of early diagnosis and accurate detection may result in severe infection as well as mortality. Therefore, it is urgently required that rapid, selective, and accurate techniques for detecting pathogenic viruses are developed. Nanotechnology-based biosensors are finding many applications in biological detection, which may address these issues and realize direct detection of molecular targets in real time. Among various nanoplatforms, optical nanobiosensors have aroused much interest due to their inherent advantages of high sensitivity and direct readout. In this review, a summary of recent progress on the optical biosensors based on nanotechnology for pathogenic virus detection is provided, with focus on quantum dots (QDs), upconversion nanoparticles (UCNPs), noble metal nanoparticles, and organic fluorescent molecules-based nanoprobes and chemiluminescence assays. These representative studies demonstrate appealing performance as biosensors and hold great promise for clinical diagnosis.

Two deep-ultraviolet nonlinear optical monolayers obtained by a template-optimized design strategy

We obtained two two-dimentional deep-ultraviolet nonlinear optical layers with a large band gap and proper second harmonic generation by a template-optimized design strategy.