Facile Preparation of Ultrasmall Void Metallic Nanogap from Self-Assembled Gold-Silica Core-Shell Nanoparticles Monolayer via Kinetic Control

Capillarity-Driven Enrichment and Hydrodynamic Trapping of Trace Nucleic Acids by Plasmonic Cavity Membrane for Rapid and Sensitive Detections

Small-reactor-based polymerase chain reaction (PCR) has attracted considerable attention. A significant number of tiny reactors must be prepared in parallel to capture, amplify, and accurately quantify few target genes in clinically relevant large volume, which, however, requires sophisticated microfabrication and longer sample-to-answer time. Here, single plasmonic cavity membrane is reported that not only enriches and captures few nucleic acids by taking advantage of both capillarity and hydrodynamic trapping but also quickly amplifies them for sensitive plasmonic detection. The plasmonic cavity membrane with few nanoliters in a void volume is fabricated by self-assembling gold nanorods with SiO2 tips. Simulations reveal that hydrodynamic stagnation between the SiO2 tips is mainly responsible for the trapping of the nucleic acid in the membrane. Finally, it is shown that the plasmonic cavity membrane is capable of enriching severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) genes up to 20 000-fold within 1 min, amplifying within 3 min, and detecting the trace genes as low as a single copy µL-1. It is anticipated that this work not only expands the utility of PCR but also provides an innovative way of the enrichment and detection of trace biomolecules in a variety of point-of-care testing applications.

Interfacing Langmuir-Blodgett and Pickering Emulsions for the Synthesis of 2D Nanostructured Films: Applications in Copper Ion Adsorption

This research focuses on developing a 2D thin film comprising a monolayer of silica nanoparticles functionalized with polyethyleneimine (PEI), achieved through a novel integration of Langmuir-Blodgett (L-B) and Pickering emulsion techniques. The primary aim was to create a nanostructured film that exhibits dual functionality: iridescence and efficient metal ion adsorption, specifically Cu(II) ions. The methodology combined L-B and Pickering emulsion polymerization to assemble and stabilize a nanoparticle monolayer at an oil/water interface, which was then polymerized under UV radiation to form an asymmetrically structured film. The results demonstrate that the film possesses a high adsorption efficiency for Cu(II) ions, with the enhanced mechanical durability provided by a reinforcing layer of polyvinyl alcohol/glycerol. The advantage of combining L-B and Pickering emulsion technology is the ability to generate 2D films from functional nanoparticle monolayers that are sufficiently sturdy to be deployed in applications. The 2D film's practical applications in environmental remediation were confirmed through its ability to adsorb and recover Cu(II) ions from aqueous solutions effectively. We thus demonstrate the film's potential as a versatile tool in water treatment applications owing to its combined photonic and adsorptive properties. This work paves the way for future research on the use of nanoengineered films in environmental and possibly photonic applications focusing on enhancing the film's structural robustness and exploring its broader applicability to other pollutants and metal ions.

2D superlattices via interfacial self-assembly of polymer-grafted Au nanoparticles

Nanoparticle (NP) superlattices are periodic arrays of nanoscale building blocks. Because of the collective effect between functional NPs, NP superlattices can exhibit exciting new properties that are distinct from those of individual NPs or corresponding bulk materials. In particular, two-dimensional (2D) NP superlattices have attracted increasing attention due to their emerging applications in micro/opto-electronics, catalysis, sensing, and other fields. Among various preparation methods, evaporation-induced interfacial self-assembly has become the most popular method for preparing 2D NP superlattices because it is a simple, low-cost, and scalable process that can be widely applied to various NPs. Introducing soft ligands, such as polymers, can not only provide convenience in controlling the self-assembly process and tuning superlattice structures but also improve the properties of 2D NP superlattices. This feature article focuses on the methods of evaporation-induced self-assembly of polymer-grafted Au NPs into free-standing 2D NP superlattice films at air/liquid interfaces and 2D NP superlattice coatings on substrates, followed by studies on in situ tracking of the self-assembly evolution process through small-angle X-ray scattering. Their application in nano-floating gate memory devices is also included. Finally, the challenges and perspectives of this direction are discussed.

Controlling Atomic-Scale Restructuring and Cleaning of Gold Nanogap Multilayers for Surface-Enhanced Raman Scattering Sensing

We demonstrate the reliable creation of multiple layers of Au nanoparticles in random close-packed arrays with sub-nm gaps as a sensitive surface-enhanced Raman scattering substrate. Using oxygen plasma etching, all the original molecules creating the nanogaps can be removed and replaced with scaffolding ligands that deliver extremely consistent gap sizes below 1 nm. This allows precision tailoring of the chemical environment of the nanogaps which is crucial for practical Raman sensing applications. Because the resulting aggregate layers are easily accessible from opposite sides by fluids and by light, high-performance fluidic sensing cells are enabled. The ability to cyclically clean off analytes and reuse these films is shown, exemplified by sensing of toluene, volatile organic compounds, and paracetamol, among others.

A Review on Self-Assembly of Colloidal Nanoparticles into Clusters, Patterns, and Films: Emerging Synthesis Techniques and Applications

The colloidal synthesis of functional nanoparticles has gained tremendous scientific attention in the last decades. In parallel to these advancements, another rapidly growing area is the self-assembly or self-organization of these colloidal nanoparticles. First, the organization of nanoparticles into ordered structures is important for obtaining functional interfaces that extend or even amplify the intrinsic properties of the constituting nanoparticles at a larger scale. The synthesis of large-scale interfaces using complex or intricately designed nanostructures as building blocks, requires highly controllable self-assembly techniques down to the nanoscale. In certain cases, for example, when dealing with plasmonic nanoparticles, the assembly of the nanoparticles further enhances their properties by coupling phenomena. In other cases, the process of self-assembly itself is useful in the final application such as in sensing and drug delivery, amongst others. In view of the growing importance of this field, this review provides a comprehensive overview of the recent developments in the field of nanoparticle self-assembly and their applications. For clarity, the self-assembled nanostructures are classified into two broad categories: finite clusters/patterns, and infinite films. Different state-of-the-art techniques to obtain these nanostructures are discussed in detail, before discussing the applications where the self-assembly significantly enhances the performance of the process.

Interfacial Colloidal Self-Assembly for Functional Materials

ConspectusSelf-assembly bridges nanoscale and microscale colloidal particles into macroscale functional materials. In particular, self-assembly processes occurring at the liquid/liquid or solid/liquid/air interfaces hold great promise in constructing large-scale two- or three-dimensional (2D or 3D) architectures. Interaction of colloidal particles in the assemblies leads to emergent collective properties not found in individual building blocks, offering a much larger parameter space to tune the material properties. Interfacial self-assembly methods are rapid, cost-effective, scalable, and compatible with existing fabrication technologies, thus promoting widespread interest in a broad range of research fields.Surface chemistry of nanoparticles plays a predominant role in driving the self-assembly of nanoparticles at water/oil interfaces. Amphiphilic nanoparticles coated with mixed polymer brushes or mussel-inspired polydopamine were demonstrated to self-assemble into closely packed thin films, enabling diverse applications from electrochemical sensors and catalysis to surface-enhanced optical properties. Interfacial assemblies of amphiphilic gold nanoparticles were integrated with graphene paper to obtain flexible electrodes in a modular approach. The robust, biocompatible electrodes with exceptional electrocatalytic activities showed excellent sensitivity and reproducibility in biosensing. Recyclable catalysts were prepared by transferring monolayer assemblies of polydopamine-coated nanocatalysts to both hydrophilic and hydrophobic substrates. The immobilized catalysts were easily recovered and recycled without loss of catalytic activity. Plasmonic nanoparticles were self-assembled into a plasmonic substrate for surface-enhanced Raman scattering, metal-enhanced fluorescence, and modulated fluorescence resonance energy transfer (FRET). Strong Raman enhancement was accomplished by rationally directing the Raman probes to the electromagnetic hotspots. Optimal enhancement of fluorescence and FRET was realized by precisely controlling the spacing between the metal surface and the fluorophores and tuning the surface plasmon resonance wavelength of the self-assembled substrate to match the optical properties of the fluorescent dye.At liquid/solid interfaces, infiltration-assisted (IFAST) colloidal self-assembly introduces liquid infiltration in the substrate as a new factor to control the degree of order of the colloidal assemblies. The strong infiltration flow leads to the formation of amorphous colloidal arrays that display noniridescent structural colors. This method is compatible with a broad range of colloidal particle inks, and any solid substrate that is permeable to dispersing liquids but particle-excluding is suitable for IFAST colloidal assembly. Therefore, the IFAST technology offers rapid, scalable fabrication of structural color patterns of diverse colloidal particles with full-spectrum coverage and unprecedented flexibility. Metal-organic framework particles with either spherical or polyhedral morphology were used as ink particles in the Mayer rod coating on wettability patterned photopapers, leading to amorphous photonic structures with vapor-responsive colors. Anticounterfeiting labels have also been developed based on the complex optical features encoded in the photonic structures.Interfacial colloidal self-assembly at the water/oil interface and IFAST assembly at the solid/liquid/air interface have proven to be versatile fabrication platforms to produce functional materials with well-defined properties for diverse applications. These platform technologies are promising in the manufacturing of value-added functional materials.

Rapid Quantitative Detection of Voriconazole in Human Plasma Using Surface-Enhanced Raman Scattering

There is an increasing demand for rapid detection techniques for monitoring the therapeutic concentration of voriconazole (VRC) in human biological fluids. Herein, a rapid and selective surface-enhanced Raman scatting method for point-of-care determination of VRC in human plasma was developed via a portable Raman spectrometer. This approach has enabled the quantification of the VRC spiked into human plasma at clinical relevant concentrations. A gold nanoparticle solution (Au sol) was used as the SERS substrate, and the agglomerating conditions on its sensitivity were optimized. The method involves the formation of hot spots, and the signal of VRC molecules adsorbed on the surface of the SERS hot spot was amplified by 10⁵. The calibration curve was linear in the range of 0.02-10 ppm, with satisfactory repeatability. The limit of detection was as low as 12.3 ppb. The variation in VRC spectra over time on different substrates demonstrated good reproducibility. Notably, the salting-out extraction method developed in this study was rapid and suitable for the quantitation of drugs in biological samples. Compared with traditional methods, this approach allows for the point-of-care quantification of VRC directly in a complex matrix, which may open up new exciting opportunities for future use of the SERS technique in clinical applications.

Large Area Patterning of Highly Reproducible and Sensitive SERS Sensors Based on 10-nm Annular Gap Arrays

Applicable surface-enhanced Raman scattering (SERS) active substrates typically require low-cost patterning methodology, high reproducibility, and a high enhancement factor (EF) over a large area. However, the lack of reproducible, reliable fabrication for large area SERS substrates in a low-cost manner remains a challenge. Here, a patterning method based on nanosphere lithography and adhesion lithography is reported that allows massively parallel fabrication of 10-nm annular gap arrays on large areas. The arrays exhibit excellent reproducibility and high SERS performance, with an EF of up to 10⁷. An effective wearable SERS contact lens for glucose detection is further demonstrated. The technique described here extends the range of SERS-active substrates that can be fabricated over large areas, and holds exciting potential for SERS-based chemical and biomedical detection.

Free-standing two-dimensional sheets of polymer-linked nanoparticles

Here, we report a simple and general approach to fabricate free-standing two-dimensional (2D) sheets of nanoparticles by the simultaneous self-assembly of hydrophobic nanoparticles and hydrophilic polymers at the liquid-liquid interface. The nanoparticle-polymer interaction at the interface generates well-defined 2D sheets of densely packed nanoparticles with a lateral dimension of tens of micrometers. The nanosheets transferred in water are stable over months without any additional cross-linking step. The method is applicable for a broad range of nanoparticles including oxide, semiconductor, and metal nanoparticles as well as functional polymers.

High-Throughput Direct Writing of Metallic Micro- and Nano-Structures by Focused Ga+ Beam Irradiation of Palladium Acetate Films

Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 μC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 μΩ·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed.

Colloidal Multiscale Assembly via Photothermally Driven Convective Flow for Sensitive In-Solution Plasmonic Detections

The assembly of metal nanoparticles and targets to be detected in a small light probe volume is essential for achieving sensitive in-solution surface-enhanced Raman spectroscopy (SERS). Such assemblies generally require either chemical linkers or templates to overcome the random diffusion of the colloids unless the aqueous sample is dried. Here, a facile method is reported to produce 3D multiscale assemblies of various colloids ranging from molecules and nanoparticles to microparticles for sensitive in-solution SERS detection without chemical linkers and templates by exploiting photothermally driven convective flow. The simulations suggest that colloids sub 100 nm in diameter can be assembled by photothermally driven convective flow regardless of density; the assembly of larger colloids up to several micrometers by convective flow is significant only if their density is close to that of water. Consistent with the simulation results, the authors confirm that the photothermally driven convective flow is mainly responsible for the observed coassembly of plasmonic gold nanorods with either smaller molecules or larger microparticles. It is further found that the coassembly with the plasmonic nanoantennae leads to dramatic Raman enhancements of molecules, microplastics, and microbes by up to fivefold of magnitude compared to those measured in solution without the coassembly.

Etched-spiky Au@Ag plasmonic-superstructure monolayer films for triple amplification of surface-enhanced Raman scattering signals

Generally, a high quality surface-enhanced Raman spectroscopy (SERS) substrate often requires a highly-tailorable electromagnetic (EM) field generated at nanoparticle (NP) surfaces by the regulation of the morphologies, components and roughness of NPs. However, most recent universal approaches are restricted to single components, and integrating these key factors into one system to achieve the theoretically maximum signal amplification is still challenging. Herein, we design a triple SERS signal amplification platform by the coordination of spiky Au NPs with rich-tip nanostructures, controllable silver nanoshell, as well as tailorable surface roughness into one nano-system. As a result, the theoretical electromagnetic field of the interfacial self-assembled 2D substrate can be improved by nearly 5 orders of magnitude, and the ideal tracing capability for the model SERS molecule can be achieved at levels of 5 × 10^-11 M. Finally, diverse analytes in pesticide residues, environmental pollutants as well as medically diagnose down to 10^-11 M and can be fingerprinted by the proposed SERS nano-platform. Our integrated triple amplification platform not only provides an effective SERS sensing strategy, but also makes it possible to simultaneously achieve high sensitivity, stability as well as universality into one plasmonic-based SERS sensing system.

Centrifugation-induced assembly of dense hotspots based SERS substrate for enhanced Raman scattering and quenched fluorescence

Hanging (aggregation stuck to the centrifugal tube) in the centrifugation process is always regarded as an unwanted condition. In this work, we develop a centrifugation-induced assembly of dense hotspots surface-enhanced Raman scattering (SERS) substrates from the hanging phenomenon. We discovered interesting sintering-resistant behavior (maintain the sharp nanotip features) of star-like Au nanoparticles after centrifugation-induced assembly, which is in stark contrast with the sintering phenomenon of sphere-like nanoparticles. We also found that one side of centrifugal-induced Au assemblies is two-dimensional (2D, root mean square (rms) roughness down to ∼10 nm), while the other is three-dimensional (3D, rms roughness more than 100 nm). The close-packed feature of the Au assemblies makes them candidates as dense hotspots based SERS substrates. Through systematic investigation of SERS performance of centrifugation-induced assemblies with different morphology (star-like and sphere-like, 2D and 3D), it was found that the 3D side of star-like Au nanoparticles assembly exhibits the highest SERS enhancement together with quenched fluorescence. The star-like SERS substrate also displays high detection uniformity (with 10^-7M Rhodamine 6G) and a low detection limit (down to 10^-12M Rhodamine 6G).

Selenium Vacancies and Synergistic Effect of Near- and Far-Field-Enabled Ultrasensitive Surface-Enhanced Raman-Scattering-Active Substrates for Malaria Detection

Defect engineering with the active control of defect states brings remarkable enhancement on surface-enhanced Raman scattering (SERS) by magnifying semiconductor-molecule interaction. Such light-trapping architectures can increase the light path length, which promotes photon-analytes interactions and further improves the SERS sensitivity. However, by far the reported semiconductor SERS-active substrates based on these strategies are often nonuniform and commonly in the form of isolated laminates or random clusters, which limit their reliability and stability for practical applications. Herein, we develop self-grown single-crystalline "V-shape" SnSe_2-x (SnSe_1.5, SnSe_1.75, SnSe₂) nanoflake arrays (SnSe_2-x NFAs) with controlled selenium vacancies over large-area (10 cm × 10 cm) for ultrahigh-sensitivity SERS. First-principles density functional theory (DFT) is used to calculate the band gap and the electronic density of states (DOS). Based on the Herzberg-Teller theory regarding the vibronic coupling, the results of theoretical calculation reveal that the downshift of band edge and high DOS of SnSe_1.75 can effectively enhance the vibronic coupling within the SnSe_1.75-R6G system, which in turn enhances the photoinduced charge transfer resonance and contributes to the SERS activity with a remarkable enhancement factor of 1.68 × 10⁷. Furthermore, we propose and demonstrate ultrasensitive (10^-15 M for R6G), uniform, and reliable SERS substrates by forming SnSe_1.75 NFAs/Au heterostructures via a facile Au evaporation process. We attribute the superior performance of our SnSe_1.75 NFAs/Au heterostructures to the following reasons: (1) selenium vacancies and (2) synergistic effect of the near and far fields. In addition, we successfully build a detection platform to achieve rapid (∼15 min for the whole process), antibody-free, in situ, and reliable early malaria detection (100% detection rate for 10 samples with 160 points) in whole blood, and molecular hemozoin (<100/mL) can be detected. Our approach not only provides an efficient technique to obtain large-area, uniform, and reliable SERS-active substrates but also offers a substantial impact on addressing practical issues in many application scenarios such as the detection of insect-borne infectious diseases.

A Super-Boosted Hybrid Plasmonic Upconversion Process for Photodetection at 1550 nm Wavelength

A super-boosted hybrid plasmonic upconversion (UC) architecture comprising a hierarchical plasmonic upconversion (HPU) film and a polymeric microlens array (MLA) film is proposed for efficient photodetection at a wavelength of 1550 nm. Plasmonic metasurfaces and Au core-satellite nanoassembly (CSNA) films can strongly induce a more effective plasmonic effect by providing numerous hot spots in an intense local electromagnetic field up to wavelengths exceeding 1550 nm. Hence, significant UC emission enhancement is realized via the amplified plasmonic coupling of an HPU film comprising an Au CSNA and UC nanoparticles. Furthermore, an MLA polymer film is synergistically coupled with the HPU film, thereby focusing the incident near-infrared light in the micrometer region, including the plasmonic nanostructure area. Consequently, the plasmonic effect super-boosted by microfocusing the incident light, significantly lowers the detectable power limit of a device, resulting in superior sensitivity and responsivity at weak excitation powers. Finally, a triple-cation perovskite-based photodetector coupled with the hybrid plasmonic UC film exhibits the excellent values of responsivity and detectivity of 9.80 A W^-1 and 8.22 × 10¹² Jones at a weak power density of ≈0.03 mW cm^-2 , respectively, demonstrating that the device performance is enhanced by more than 10⁴ magnitudes over a reference sample.

Instant interfacial self-assembly for homogeneous nanoparticle monolayer enabled conformal "lift-on" thin film technology

Thin film fabrication is of great importance in modern engineering. Here, we propose a universal and conformal thin film technique enabled by the wetting empowered interfacial self-assembly. By tailoring the contact angle of nanoparticle (NP), a NP monolayer can be assembled instantly (within 5 seconds) with an excellent harvesting efficiency (up to 97.5 weight %). This self-assembly strategy presents a universal applicability on various materials, e.g., nonmetal, metal, and core-shell structures, and can achieve a monolayer with same in-plane area as a 95 cm² wafer in a single process, indicating great potential for scale-up manufacturing. Through a template transfer, we coat the surface of different substrates (plastic, paper, etc.) with the assembled film in a conformal and nondestructive “lift-on” manner and subsequently demonstrate fluorescent micropatterns. This self-assembly strategy has great implications in advancing thin film technology in a user-friendly and cost-effective fashion for applications in anti-counterfeiting, actuators, and wearable/flexible electronics.

Plasmon-Boosted Cu-Doped TiO2 Oxygen Vacancy-Rich Luminol Electrochemiluminescence for Highly Sensitive Detection of Alkaline Phosphatase

In this study, an effective oxygen vacancy (O_v)-involved luminol-dissolved oxygen (O₂) electrochemiluminescence (luminol-DO ECL) system was developed and exploited for ECL sensing applications through significant plasmon enhancement of the O_v-involved weak luminol-DO ECL signals by the combined use of Cu-doped TiO₂ oxygen vacancy and a Au@SiO₂ nanomembrane. The results disclosed that the ECL response of the corresponding system could be synergistically boosted, and the plausible underlying mechanism has been discussed. Furthermore, for the first time, the developed system has been successfully applied for the highly sensitive detection of alkaline phosphatase with a low limit of detection of 0.005 U/L, with an excellent linear range from 0.005 to 10 U/L, as well as good stability and reproducibility.

A sandwich SERS immunoassay platform based on a single-layer Au-Ag nanobox array substrate for simultaneous detection of SCCA and survivin in serum of patients with cervical lesions

The evaluation of tumor biomarkers in blood specimens is vital for patients with cervical lesions. Herein, an ultrasensitive surface enhanced Raman scattering (SERS) platform was proposed for simultaneous detection of cervical-lesion-related serum biomarkers. Raman reporter labeled Au-Ag nanoshells (Au-AgNSs) acted as SERS tags and an Au-Ag nanobox (Au-AgNB) array substrate prepared by the oil-water interface self-assembly method was used as a capture substrate. This single-layer Au-AgNB array substrate was proved to have exceptional uniformity by atomic force microscopy and SERS mapping. Numerous "hot spots" and specific adsorption surfaces offered by the Au-AgNB array substrate were confirmed by the finite difference time domain method, which could generate a SERS signal in electromagnetic enhancement. Binding of antigens between antibodies on Au-AgNSs and the Au-AgNB array substrate led to the formation of a sandwich-structure by the two metal nanostructures. Consequently, an ultralow detection limit of 6 pg mL-1 for squamous cell carcinoma antigen (SCCA) and 5 pg mL-1 for survivin in a wide linear logarithmic range of 10 pg mL-1 to 10 μg mL-1 was acquired. High selectivity and reproducibility with relative standard deviations of 7.701% and 6.943% were detected. Furthermore, the simultaneous detection of the two biomarkers in practical specimens was conducted, and the results were consistent with those of the enzyme-linked immunosorbent assay. This platform exhibited good robustness in the rapid and sensitive detection of SCCA and survivin, which could be a promising tool in early clinical diagnosis for different grades of cervical lesions.

Wet-Chemical Electro-Plasmonic Modulation of Metasurfaced Cell-Electrode Interfaces for Effective and Selective Entropic Killing of Cancer Cells

Surface plasmons (SPs) of metallic nanostructures excited by optical ways have been extensively utilized for versatile sensing, biomedical, catalysis, and energy conversion applications. Nevertheless, utilizing the electrically excited plasmonic field (effect) of metallic nanostructures (and electrodes) in wet-chemical conditions, for catalytic and energy conversion, especially for potential biological and biomedical applications, is still poorly studied. Herein, we report a conceptual and biocompatible wet-chemical platform and approach to utilize the electrically excited plasmonic field (effect) of metasurfaced plasmonic electrodes (without light irradiation) for cell fate regulation on electrode surfaces. By using self-assembled two-dimensional (2D) ordered-plasmonic AuNP- or Au@SiO₂ NP-nanomembrane as a metasurfaced electrode, the cancer cells cultured on it can be selectively and effectively killed (due to the enhanced stimulus current and related entropic effects) via wet-chemical electro-plasmonic modulation (WC-EPM) of the cell-electrode interfaces. Biological conformational and configurational entropic change information from the cell membrane during the WC-EPM of the cell-electrode interface has also been revealed by label-free in situ surface-enhanced Raman spectroscopy. The developed approach and results can be guides for the WC-EPM regulation of biological interfaces to achieve cell fate regulation and disease treatment and is also constructive for the design of 2D plasmonic nanomaterials and devices for efficient electrochemical energy conservation and biomedical applications.

Simple Self-Assembly Strategy of Nanospheres on 3D Substrate and Its Application for Enhanced Textured Silicon Solar Cell

Nanomaterials and nanostructures provide new opportunities to achieve high-performance optical and optoelectronic devices. Three-dimensional (3D) surfaces commonly exist in those devices (such as light-trapping structures or intrinsic grains), and here, we propose requests for nanoscale control over nanostructures on 3D substrates. In this paper, a simple self-assembly strategy of nanospheres for 3D substrates is demonstrated, featuring controllable density (from sparse to close-packed) and controllable layer (from a monolayer to multi-layers). Taking the assembly of wavelength-scale SiO₂ nanospheres as an example, it has been found that textured 3D substrate promotes close-packed SiO₂ spheres compared to the planar substrate. Distribution density and layers of SiO₂ coating can be well controlled by tuning the assembly time and repeating the assembly process. With such a versatile strategy, the enhancement effects of SiO₂ coating on textured silicon solar cells were systematically examined by varying assembly conditions. It was found that the close-packed SiO₂ monolayer yielded a maximum relative efficiency enhancement of 9.35%. Combining simulation and macro/micro optical measurements, we attributed the enhancement to the nanosphere-induced concentration and anti-reflection of incident light. The proposed self-assembly strategy provides a facile and cost-effective approach for engineering nanomaterials at 3D interfaces.

Water-Wettable Open Plasmonic Nanocavities for Ultrasensitive Molecular Detections in Multiple Phases

Plasmonic nanocavities between metal nanoparticles on metal films are either hydrophobic or fully occupied by nonmetallic spacers, preventing molecular diffusion into electromagnetic hotspots. Here we realize water-wettable open plasmonic cavities by devising gold nanoparticle with site-selectively grown ultrathin dielectric layer-on-gold film structures. We directly confirm that hydrophilic dielectric layers of SiO₂ or TiO₂, which are formed only at the tips of gold nanorod via precise temperature control, render sub-10 nm cavities open to the surroundings and completely water-wettable. Simulations reveal that spontaneous wetting in our cavities is driven by the presence of tip-selective hydrophilic layer and tendency of minimizing high energy air/water interface inside the cavities. Our plasmonic cavities show significant Raman enhancement of up to 4 orders of magnitude higher than those of conventional ones for molecules in various media. Our findings will offer new opportunities for sensing applications of plasmonic nanocavities and have huge impacts on cavity plasmonics.

Surface-Enhanced Raman Scattering-Active Plasmonic Metal Nanoparticle-Persistent Luminescence Material Composite Films for Multiple Illegal Dye Detection

Uniform two-dimensional plasmonic nanoparticle (NP)-semiconductor composite films could retard the attenuation of electromagnetic evanescent wave and show intensive Raman activity for the multiplex monitoring of hazards in a practical food matrix. Here, an efficient Raman platform is developed by employing a plasmonic nanoparticle (NP)-persistent luminescence material (PLM) composite film. PLM show upconversion photoluminescence (UCPL) properties. The emitted photons are absorbed by plasmonic NPs, which further boost the surface plasmon resonance for the generation of high polarizability and induce strong electromagnetic strength for surface-enhanced Raman scattering (SERS) enhancement. A UCPL-assisted SERS-enhanced mechanism is proposed and verified. A plasmonic NP-PLM film with superior SERS activity and detection capability becomes an alternative candidate for the sensitive and multiple detection of illegal addition of dyes in a food matrix. The proposed UCPL-assisted SERS-enhanced mechanism provides promising future directions to this end to design a next-generation SERS-active plasmonic NP-PLM composite film for the specific detection in complex samples.

Widely tunable surface plasmon resonance and uniquely superior SERS performance of Au nanotube network films

Three-dimensional Au network films with flexibility and transferability were fabricated based on sputtering deposition onto electrospun nanofibers as a template. The films are constructed using long Au nanotubes that are cross-linked with each other and that have dense nanoparticles on the tube wall surface. The surface plasmon resonance (SPR) peaks for the films are tunable in a wide range, from visible light to the near-infrared region, by tuning the inner diameter and/or wall thickness of the nanotubes. Such structured film exhibits significant surface-enhanced Raman scattering (SERS) activity with good signal uniformity and stability, and possesses great potential in thein situdetection of trace organic pollutants on a solid surface by simple transferring. This study provides a Au film with a unique structure and widely tunable SPR forin situSERS sensing and other needs.

Self-assembly of colloidal nanoparticles into 2D arrays at water-oil interfaces: rational construction of stable SERS substrates with accessible enhancing surfaces and tailored plasmonic response

Self-assembly at water-oil interfaces has been shown to be a cheap, convenient and efficient route to obtain densely packed layers of plasmonic nanoparticles which have small interparticle distances. This creates highly plasmonically active materials that can be used to give strong SERS enhancement and whose structure means that they are well suited to creating the highly stable, reproducible and uniform substrates that are needed to allow routine and accurate quantitative SERS measurements. A variety of methods have been developed to induce nanoparticle self-assembly at water-oil interfaces, fine tune the surface chemistry and adjust the position of the nanoparticles at the interface but only some of these are compatible with eventual use in SERS, where it is important that target molecules can access the active surface unimpeded. Similarly, it is useful to transform liquid plasmonic arrays into easy-to-handle free-standing solid films but these can only be used as solid SERS substrates if the process leaves the surface nanoparticles exposed. Here, we review the progress made in these research areas and discuss how these developments may lead towards achieving rational construction of tailored SERS substrates for sensitive and quantitative SERS analysis.

Macroscopic two-dimensional monolayer films of gold nanoparticles: fabrication strategies, surface engineering and functional applications

In the last few decades, two-dimensional monolayer films of gold nanoparticles (2D MFGS) have attracted increasing attention in various fields, due to their superior attributes of macroscopic size and accessible fabrication, controllable electromagnetic enhancement, distinctive optical harvesting and electron transport capabilities. This review will focus on the recent progress of 2D monolayer films of gold nanoparticles in construction approaches, surface engineering strategies and functional applications in the optical and electric fields. The research challenges and prospective directions of 2D MFGS are also discussed. This review would promote a better understanding of 2D MFGS and establish a necessary bridge among the multidisciplinary research fields.

Unprecedented efficient electron transport across Au nanoparticles with up to 25-nm insulating SiO2-shells

Quantum tunneling is the basis of molecular electronics, but often its electron transport range is too short to overcome technical defects caused by downscaling of electronic devices, which limits the development of molecular-/nano-electronics. Marrying electronics with plasmonics may well present a revolutionary way to meet this challenge as it can manipulate electron flow with plasmonics at the nanoscale. Here we report on unusually efficient temperature-independent electron transport, with some photoconductivity, across a new type of junction with active plasmonics. The junction is made by assembly of SiO₂ shell-insulated Au nanoparticles (Au@SiO₂ NPs) into dense nanomembranes of a few Au@SiO₂ layers thick and transport is measured across these membranes. We propose that the mechanism is plasmon-enabled transport, possibly tunneling (as it is temperature-independent). Unprecedentedly ultra-long-range transport across one, up to even three layers of Au@SiO₂ in the junction, with a cumulative insulating (silica) gap up to 29 nm/NP layer was achieved, well beyond the measurable limit for normal quantum mechanical tunneling across insulators (~2.5 nm at 0.5–1 V). This finding opens up a new interdisciplinary field of exploration in nanoelectronics with wide potential impact on such areas as electronic information transfer.

Optical Detection of Small Metabolites for Biological Gas Conversion by using Metal Nanoparticle Monolayers Produced by Capillary-Assisted Transfer

Detection of small metabolites is essential for monitoring and optimizing biological gas conversion. Currently, such detection is typically done by liquid chromatography with offline sampling. However, this method often requires large equipment with multiple separation columns and is at risk of serious microbial contamination during sampling. Here we propose real-time optical detection of small metabolites using uniform plasmonic nanoparticles monolayers produced by capillary-assisted transfer. We reproducibly fabricate metal nanoparticles monolayers with a diameter of ∼1 mm for the detection of acetate, butyrate, and glucose by a glass capillary tube. Metal nanoparticles monolayers are not only uniform in terms of average interparticle distance but also structurally stable under dynamic fluidic conditions. The monolayers resistant to fluid shear stress with surface-enhanced Raman scattering are able to reversibly monitor the concentration of acetate and sensitively detect acetate and glucose at levels as low as 10 μM, which is more than 2 orders of magnitude lower than the concentration range of typical biological gas conversion. In addition, structurally similar metabolites such as acetate and butyrate, when mixed, become distinguishable by our method.

Active Surface Hydrophobicity Switching and Dynamic Interfacial Trapping of Microbial Cells by Metal Nanoparticles for Preconcentration and In-Plane Optical Detection

The surface hydrophobicity of a microbial cell is known to be one of the important factors in its adhesion to an interface. To date, such property has been altered by either genetic modification or external pH, temperature, and nutrient control. Here we report a new strategy to engineer a microbial cell surface and discover the unique dynamic trapping of hydrophilic cells at an air/water interface via hydrophobicity switching. We demonstrate the surface transformation and hydrophobicity switching of Escherichia coli (E. coli) by metal nanoparticles. By employing real-time dark-field imaging, we directly observe that hydrophobic gold nanoparticle-coated E. coli, unlike its naked counterpart, is irreversibly trapped at the air/water interface because of elevated hydrophobicity. We show that our surface transformation method and resulting dynamic interfacial trapping can be generally extended to Gram-positive bateria, Gram-negative bacteria, and fungi. As the dynamic interfacial trapping allows the preconcentration of microbial cells, high intensity of scattering light, in-plane focusing, and near-field enhancement, we are able to directly quantify E. coli as low as 1.0 × 10³ cells/ml by using a smartphone with an image analyzer. We also establish the identification of different microbial cells by the characteristic Raman transitions directly measured from the interfacially trapped cells.

Nanoengineered Metasurface Immunosensor with over 1000-Fold Electrochemiluminescence Enhancement for Ultra-sensitive Bioassay

Enhancing electrochemiluminescence (ECL) with plasmonic materials is promising but still a long-standing barrier to improve its sensitivity for ultrasensitive bioassays, due to the lack of comprehensive understanding and effective strategies to fully utilize plasmonic effects for ECL enhancement. Herein, by insulating gold nanoparticles with silica shells (Au@SiO₂ NPs), and finely tuning their core/shell sizes and controlling interparticle spacing via assembling them into a dense nanomembrane, we develop a novel 2D metasurface. Due to well-controlled high density “hot spots” and 2D ordered arrangement of the unit NPs in the nanomembrane, the metasurfaced ECL electrode shows over 1,000-fold plasmonic ECL enhancement for the classical Ru(bpy)₃²⁺-tripropylamine system, which is two orders of magnitude higher than ever reported (<30-fold). Such fabricated ECL biosensor demonstrates superior detection performance for prostate-specific antigen with a detection limit of 3 fg mL⁻¹. Our results provide understanding of plasmonic effects for ECL enhancement and will benefit for biosensor construction for ultrasensitive bioassays.

•

A unique Au@SiO₂ NP-based 2D metamaterial was constructed

•

The plasmon effects were fully utilized to enhance ECL excitation

•

The as-fabricated metasurfaced ECL electrode shows over 1,000-fold enhancement

Surface-Enhanced Raman Spectroscopy on Self-Assembled Au Nanoparticles Arrays for Pesticides Residues Multiplex Detection under Complex Environment

The high reproducibility of trace detection in complex systems is very hard but crucial to analytical technology and science. Here, we present a surface-enhanced Raman scattering (SERS) platform made by large-scale self-assembly of Au nanoparticle (NP) arrays at the cyclohexane/water interface and its use for pesticides residues trace detection. The analyte molecules spontaneously localize into the Au NPs’ nanogaps during the self-assembly process, yielding excellent Raman signal enhancement by surface effects, and possibly both by the concentration of the analytes into the array and by plasmonic hot-spot formation. Transmission electron microscopy (TEM) images demonstrate a good uniformity of interparticle distances (2–3 nm) in the Au NP arrays. SERS experiments on crystal violet (CV) molecules demonstrated that the relative standard deviations (RSD) of the band intensities at 1173, 1376, and 1618 cm⁻¹ were 6.3%, 6.4%, and 6.9%, respectively, indicating high reproducibility of the substrate. Furthermore, we demonstrate that two pesticides dissolved in organic and aqueous phases could be simultaneously detected, suggesting an excellent selectivity and universality of this method for multiplex detection. Our SERS platform opens vast possibilities for repeatability and sensitivity detection of targets in various complex fields.

Improvement of High Affinity and Selectivity on Biosensors Using Genetically Engineered Phage by Binding Isotherm Screening

The genetically engineered M13 bacteriophage (M13 phage), developed via directed evolutionary screening process, can improve the sensitivity of sensors because of its selective binding to a target material. Herein, we propose a screening method to develop a selective and sensitive bioreporter for toxic material based on genetically engineered M13 phage. The paraquat (PQ)-binding M13 phage, developed by directed evolution, was used. The binding affinities of the PQ-binding M13 phage to PQ and similar molecules were analyzed using isothermal titration calorimetry (ITC). Based on the isotherms measured by ITC, binding affinities were calculated using the one-site binding model. The binding affinity was 5.161 × 10⁻⁷ for PQ, and 3.043 × 10⁻⁷ for diquat (DQ). The isotherm and raw ITC data show that the PQ-binding M13 phage does not selectively bind to difenzoquat (DIF). The phage biofilter experiment confirmed the ability of PQ-binding M13 bacteriophage to bind PQ. The surface-enhanced Raman scattering (SERS) platform based on the bioreporter, PQ-binding M13 phage, exhibited 3.7 times the signal intensity as compared with the wild-type-M13-phage-coated platform.

Graphene-Ag nanoparticles-cicada wings hybrid system for obvious SERS performance and DNA molecular detection

In recent years, biomaterials have increasingly attracted attention on surface-enhanced Raman spectroscopy (SERS) due to their well Raman performance while metal particles are combined with biological substrates. Therefore, we propose an environmentally friendly substrate based on silver-plated cicada wings with seamless graphene layer (Gr-AgNPs-C.w.), which can be prepared with a simple and inexpensive method. Compared with AgNPs-C.w., Gr-AgNPs-C.w. hybrids show better SERS performance with high sensitivity, good uniformity and good stability with R6G detection. The minimum detected concentration can reach 10^-15 M, and the value of R² can reach 0.996, respectively. Theoretical simulation demonstrates the situation of electromagnetic field through COMSOL software. In addition, due to the affinity of graphene for biomolecules, we can successfully detect the DNA biomolecules through a simple process. Therefore, this cheap and efficient natural SERS substrate has great potential for a considerable number of biochemical SERS applications and can broaden the way in which multiple SERS platforms derived from other natural materials are prepared.

Ultralarge Area Sub-10 nm Plasmonic Nanogap Array by Block Copolymer Self-Assembly for Reliable High-Sensitivity SERS

Effective surface enhancement of Raman scattering (SERS) requires strong near-field enhancement as well as effective light collection of plasmonic structures. To this end, plasmonic nanoparticle (NP) arrays with narrow gaps or sharp tips have been suggested as desirable structures. We present a highly dense and uniform Au nanoscale gap array enabled by the customized design of NP shape and arrangement employing block copolymer self-assembly. Block copolymer self-assembly in thin films offers uniform hexagonally packed nanopost template arrays over the entire surface of a 2 in. wafer. Conventional evaporative metal deposition over the nanotemplate surface allows precise geometric control and positional arrangement of metal NPs, constituting tunable, strong plasmonic near-field enhancement particularly at the "hot spots" near interparticular nanoscale gaps. Underlying field distribution has been investigated by a finite-difference time-domain simulation. In the detection of thiophenol, our Au nanogap array shows a remarkable enhancement of Raman intensity greater than ∼10⁴, a standard deviation as small as 12.3% compared to that of the planar Au thin film. In addition, adenine biomolecules can be detected with a detection limit as low as 100 nM. Our approach proposes highly sensitive and reliable SERS on the basis of a scalable, low-cost bottom-up strategy.

Plasmonics Yields Efficient Electron Transport via Assembly of Shell-Insulated Au Nanoparticles

Junctions built from metallic nanoparticles (NPs) can circumvent the diffraction limit and combine molecular/nanoelectronics with plasmonics. However, experimental advances in plasmon-assisted electron transport at the nanoscale have been limited. We construct junctions of a robust, molecule-free, suspended film, built solely from AuNPs, capped by SiO₂ shells (Au@SiO₂), which give insulating tunneling gaps up to 3.6 nm between the NPs. Current measured across monolayers of such AuNPs shows ultra-long-range, plasmon-enabled electron transport (P-transport), beyond the range of normal electron tunneling across insulators. This finding challenges the present understanding of electron transport in such systems and opens possibilities for future combinations of plasmonics and nanoelectronics.

•

A robust, molecule-free Au@SiO₂ nanofilm-based plasmonic circuit is fabricated

•

It shows unusual long-range electron transport across AuNPs with 3.6-nm silica gap

•

LSPR coupling plays a crucial role on the ultra-long-range electron transport

Binary "island" shaped arrays with high-density hot spots for surface-enhanced Raman scattering substrates

We have demonstrated a facile and low-cost approach for the fabrication of binary "island" shaped arrays (BISA) with high-density hot spots as reproducible surface-enhanced Raman scattering (SERS) substrates by depositing a self-assembled monolayer Au nanoparticle (AuNP) film with small gaps onto a two-dimensional (2D) silica microsphere opal structure. By varying the size of silica spheres, the SERS performance of the BISA substrate with an enhancement factor (EF) of 3.74 × 10¹⁰ magnitude and the corresponding signal intensity deviation of below 8% using 770 nm silica sphere arrays were achieved. Compared with the assembled monolayer AuNP film on a planar substrate, the BISA enabled the installation of more AuNPs as a source of hot spots due to the undulation of morphology on the nanoscale within the designated laser-illumination area. In addition, a finite-difference time-domain (FDTD) simulation suggested that the BISA structure provided geometric conditions for increasing the intensity of the formed hot spots, and the strong periodic electric fields on the BISA are located not only in the gap between adjacent AuNPs, but also along the boundary of the neighboring island of silica spheres. Surface plasmon-decayed hot carriers (hot electrons and hot holes) from AuNPs can be applied in the field of energy conversion (i.e., photocatalysis), integrated with the SERS as a sensitive optical indicator to accurately monitor the catalytic reaction process. Furthermore, we examined the catalytic reaction process of the dimerization of 4-ATP into DMAB and found that photocatalytic activity could be tuned by changing the size of silica spheres. This study provides a new design route for the fabrication of the SERS platform with high sensitivity and reproducibility to detect molecules or improve catalyst efficiency.

Tunable Plasmonic Cavity for Label-free Detection of Small Molecules

Owing to its high sensitivity and high selectivity along with rapid response time, plasmonic detection has gained considerable interest in a wide variety of sensing applications. To improve the fieldwork applicability and reliability of plasmonic detection, the integration of plasmonic nanoparticles into optical devices is desirable. Herein, we propose an integrated label-free detection platform comprising a plasmonic cavity that allows sensitive molecular detection via either surface-enhanced Raman scattering (SERS) or plasmon resonance energy transfer (PRET). A small droplet of metal ion solution spontaneously produces a plasmonic cavity on the surface of uncured poly(dimethylsiloxane) (PDMS), and as PDMS is cured, the metal ions are reduced to form a plasmonic antennae array on the cavity surface. Unique spherical feature and the integrated metallic nanoparticles of the cavity provide excellent optical functions to focus the incident light in the cavity and to rescatter the light absorbed by the nanoparticles. The optical properties of the plasmonic cavity for SERS or PRET are optimized by controlling the composition, size, and density of the metal nanoparticles. By using the cavity, we accomplish both 1000-fold sensitive detection and real-time monitoring of reactive oxygen species secreted by live cells via PRET. In addition, we achieve sensitive detection of trace amounts of toxic environmental molecules such as 5-chloro-2-methyl-4-isothiazolin-3-one/2-methyl-4-isothiazol-3-one (CMIT/MIT) and bisphenol A, as well as several small biomolecules such as glucose, adenine, and tryptophan, via SERS.

Organic Solvent as Internal Standards for Quantitative and High-Throughput Liquid Interfacial SERS Analysis in Complex Media

Liquid-state interfacial nanoparticle arrays for surface-enhanced Raman scattering (SERS) promises a practical, substrate-free, and rapid analysis but faces a great challenge to develop a batch and uniform fabrication strategy with stable internal standards (IS) because of the difficulties in precisely locating both the IS tags and analytes in the same local structure under the harsh conditions of biphasic liquid interface. Here, we develop a fast batch preparation of self-ordered dense Au nanoparticle (GNP) arrays on cyclohexane/water biphasic interface in 96-well plates with the assist of acetone as the phase-crossing inducer. The acetone can extract the pesticide molecules via a simple dipping sample peels and can rapidly capture and locate the pesticide molecule into the plasmonic hotspots. Meanwhile, this phase-crossing solvent, acetone itself, generates stable SERS signal and is used as the IS tags to calibrate the signal fluctuation. This platform presents an excellent uniformity with a relative standard deviation (RSD) of 5.9% compared to the RSD of 14.5% without the IS's correction and a good sensitivity with a limit of detection (LOD) of 1 nM thiram. This high-throughput strategy for analyzing pesticide residues at fruit peels reached detection levels of nanograms per square centimeter (ng/cm²). Combined with the 96-well plates, this platform greatly facilitates the self-assembly and multiplex sampling. The self-ordered arrays at two immiscible phases interface evidenced the detection of both the oil-soluble thiabendazole and the water-soluble thiram molecules and also realized the multiplex and two-phase detection of these two pesticides. This platform offers vast possibilities for on-site sensing of various analytes and paves a new way for the quantitative and high-throughput SERS analyzer just as convenient as the microplate reader.

Combining sonicated cold development and pulsed electrodeposition for high aspect ratio sub-10 nm gap gold dimers for sensing applications in the visible spectrum

Strong interactions between localized surface plasmons and nanoscale objects have led to the development of highly sensitive biochemical sensing in planar metallic nanostructures with sensing performance mainly dependent on the interaction volume and the local electric field. However, the sensitivity and the interaction volume of these planar structures have been limited by the achievable aspect ratios based on the standard lift-off process. We propose a new technique which involves cold sonicated development and pulsed electrodeposition to overcome this limitation, and demonstrate robust gold square dimers with sub-10 nm gaps and a gap aspect ratio of ∼8. We show that smooth gold surfaces can be achieved by growing the gold film directly on a transparent ITO substrate without a gold seed layer, and demonstrate a significant improvement in Q factors and resonance contrast in electrodeposited dimers compared to dimers fabricated by physical vapor deposition. We demonstrate that the electrodeposited dimers exhibit near 50% higher bulk refractive index sensitivity than their planar counterparts. The technique may be used to grow a variety of metals of arbitrary geometries and spatial arrangements.

Synthesis of gold nanoparticles supported on functionalized nanosilica using deep eutectic solvent for an electrochemical enzymatic glucose biosensor

Engineering of nanoparticle (NP) surfaces offers an effective approach for the development of enzymatic biosensors or microbial fuel cells with a greatly enhanced direct electron transport process. However, lack of control over the surface functionalization process and the operational instability of the immobilized enzymes are serious issues. Herein, we demonstrate a facile and green deep eutectic solvent (DES)-mediated synthetic strategy for efficient amine-surface functionalization of silicon dioxide and to integrate small gold nanoparticles (AuNPs) for a glucose biosensor. Owing to the higher viscosity of the DES, it provides uniform surface functionalization and further coupling of the AuNPs on the SiO₂ support with improved stability and dispersion. The amine groups of the functionalized Au-SiO₂NPs were covalently linked to the FAD-center of glucose oxidase (GOx) through glutaraldehyde as a bifunctional cross-linker, which promotes formation of "electrical wiring" with the immobilized enzymes. The Au-SiO₂NP/GOx/GC electrode exhibits direct electron transfer (DET) for sensing of glucose with a sensitivity of 9.69 μA mM^-1, a wide linear range from 0.2 to 7 mM and excellent stability. The present green DES-mediated synthetic approach expands the possibilities to support different metal NPs on SiO₂ as a potential platform for biosensor applications.

Highly Selective and Repeatable Surface-Enhanced Resonance Raman Scattering Detection for Epinephrine in Serum Based on Interface Self-Assembled 2D Nanoparticles Arrays

Target analyte detection in complex systems with high selectivity and repeatability is crucial to analytical technology and science. Here we present a two-dimensional (2D) surface-enhanced resonance Raman scattering (SERRS) platform, which takes advantages of the high selectivity of the SERRS sensor as well as the sensitivity and reproducibility of the interfacial SERS platform, for detecting trace epinephrine (EP) in the serum. To realize sensitive and selective detection of EP in a complex system, Au NPs are modified with α,β-nitriloacetic acid and Fe(NO₃)₃ to form the Au NP-(Fe-NTA) sensor, and as a consequence, EP can be rapidly captured by the sensor on the surface of Au NPs and then delivered at the cyclohexane/water interface. More importantly, we synthesized the extremely stable Au NPs (PVP-stabilized Au NPs), where the presence of PVP prevents aggregation of Au NPs during the self-assembly process and then makes a more uniform distribution of Au NPs with analytes at the cyclohexane/water interface, approximately 2 nm interparticle distance between the Au NPs, which has been proved by synchrotron radiation grazing incidence small-angle X-ray scattering (SR-GISAXS) experiments. The self-assembly method not only effectively avoids the aggregation of Au NPs and decreases the influence of the background signal but also can capture and enrich EP molecules in the cyclohexane/water interface, realizing the sensitive and selective detection of EP in complex serum sample. This strategy overcomes the difficulty of bringing nanostructures together to form efficient interparticle distance with simple fabrication and maximum uniformity and also provides a powerful nanosensor for tracing amounts of analyte molecules in a complex system with the advantages of capturing and enriching of target molecules in the liquid/liquid interface during the self-assembly process. Our SERRS platform opens vast possibilities for repeatability, sensitivity, and selectivity detection of targets in various complex fields.

Ultrasensitive SERS aptasensor for the detection of oxytetracycline based on a gold-enhanced nano-assembly

This paper investigated a new detection method of oxytetracycline (OTC) in aquatic products with ultrasensitive detection limit. The method was constructed on the basis of raman hot spot between gold nanoparticles (AuNPs) (13nm and 80nm diameter respectively) linked by an DNA sequence. The DNA sequence combined with the OTC aptamer including its complementary sequence as well as a stem-loop structure. The raman signal molecule (4-MBA) was modified at the surface of 13nm AuNPs. After the exposure of OTC, the aptamer sequence was preferentially combined with OTC and partially dehybridized with its complementary sequence which led the 13nm AuNPs to get more closer to the 80nm AuNPs. The raman intensity was thus increased for the more enhanced hot spot generated. Under the optimal experimental conditions, the SERS signal was positively related to the OTC concentration with a wide working range of 4.60×10^-2-4.60×10²fg/mL and the limit of detection (LOD) was as low as 4.35×10^-3fg/mL. The recovery rates of fishmeal ranged from 91.29-110.98%. The specificity of this method was further examined, and the results showed that the AuNPs based aptasensor was highly selective. This developed ultrasensitive aptamer-based SERS detection platform suggested that it may be a promising strategy for a variety of sensing applications.

A Versatile and Clearable Nanocarbon Theranostic Based on Carbon Dots and Gadolinium Metallofullerene Nanocrystals

Nanocarbons such as carbon nanotubes, graphene derivatives, and carbon nanohorns have illustrated their potential uses as cancer theranostics owing to their intrinsic fluorescence or NIR absorbance as well as superior cargo loading capacity. However, some problems still need to be addressed, such as the fates and long-term toxicology of different nanocarbons in vivo and the improvement of their performance in various biomedical imaging-guided cancer therapy systems. Herein, a versatile and clearable nanocarbon theranostic based on carbon dots (CDs) and gadolinium metallofullerene nanocrystals (GFNCs) is first developed, in which GFNCs enhance the tumor accumulation of CDs, and CDs enhance the relaxivity of GFNCs, leading to an efficient multimodal imaging-guided photodynamic therapy in vivo without obvious long-term toxicity. Furthermore, biochemical analysis reveals that the novel nanotheranostic can harmlessly eliminate from the body in a reasonable period of time after exerting diagnostic and therapeutic function.