Submonolayered Ru Deposited on Ultrathin Pd Nanosheets used for Enhanced Catalytic Applications

Engineering improved strategies for spinel cathodes in high-performing zinc-ion batteries

The development of high-performing cathode materials for aqueous zinc-ion batteries (ZIBs) is highly important for the future large-scale energy storage. Owing to the distinctive framework structure, diversity of valences, and high electrochemical activity, spinel materials have been widely investigated and used for aqueous ZIBs. However, the stubborn issues of low electrical conductivity and sluggish kinetics plague their smooth applications in aqueous ZIBs, which stimulates the development of effective strategies to address these issues. This review highlights the recent advances of spinel-based cathode materials that include the configuration of aqueous ZIBs and corresponding reaction mechanisms. Subsequently, the classifications of spinel materials and their properties are also discussed. Then, the review mainly summarizes the effective strategies for elevating their electrochemical performance, including their morphology and structure design, defect engineering, heteroatom doping, and coupling with a conductive support. In the final section, several sound prospects in this fervent field are also proposed for future research and applications.

Heteroatom Doping Promoting CoP for Driving Water Splitting

CoP nanomaterials have been extensively regarded as one of the most promising electrocatalysts for overall water splitting due to their unique bifunctionality. Although the great promise for future applications, some important issues should also be addressed. Heteroatom doping has been widely acknowledged as a potential strategy for improving the electrocatalytic performance of CoP and narrowing the gap between experimental study and industrial applications. Recent years have witnessed the rapid development of heteroatom-doped CoP electrocatalysts for water splitting. Aiming to provide guidance for the future development of more effective CoP-based electrocatalysts, we herein organize a comprehensive review of this interesting field, with the special focus on the effects of heteroatom doping on the catalytic performance of CoP. Additionally, many heteroatom-doped CoP electrocatalysts for water splitting are also discussed, and the structure-activity relationship is also manifested. Finally, a systematic conclusion and outlook is well organized to provide direction for the future development of this interesting field.

A Pd-based plasmonic photocatalyst for nitrogen fixation through an antenna-reactor mechanism

Plasmonic metal nanocrystals (e.g., Au, Ag, and Cu) hold great promise for driving photocatalytic reactions, but little is known about the plasmonic properties of Pd nanocrystals. Herein, we constructed a plasmonic Pd/Ru antenna-reactor photocatalyst through the controllable growth of a Ru nanoarray 'reactor' on a Pd nano-octahedron 'antenna' and demonstrated a plasmonic Pd-driven N2 photofixation process. The plasmonic properties of Pd nano-octahedrons were verified using finite-difference time-domain (FDTD) simulations and refractive index sensitivity tests in water-glycerol mixtures. Notably, the constructed plasmonic antenna-reactor nanostructures exhibited superior photocatalytic activities during N2 photofixation, with a maximum ammonia production rate of 117.5 ± 15.0 μmol g-1 h-1 under visible and near-infrared (NIR) light illumination. The mechanism can be attributed to the ability of the plasmonic Pd nanoantennas to harvest light to generate abundant hot electrons and the Ru nanoreactors to provide active sites for adsorption and activation of N2. This work paves the way for the development of Pd-based plasmonic photocatalysts for efficient N2 photofixation and sheds new light on the optimal design and construction of antenna-reactor nanostructures.

Activable Ru-PdRu nanosheets with heterogeneous interface for High-efficiency alcohol oxidation reaction

Fabricating 2D nanomaterials with heterogeneous structure is a feasible way to improve catalytic performance owing to its large surface area and tunable electron structure. However, such a category has not been widely reported in the field of alcohol oxidation reaction (AOR). In this work, we reported a new type of heterostructure nanosheet with Ru nanoparticles decorated around the edge of PdRu nanosheets (Ru-PdRu HNSs). Particularly, strong electronic interaction and sufficient active sites attributed to the construction of heterogeneous interface, is the key to the superior electrocatalytic behavior of Ru-PdRu HNSs towards methanol oxidation reaction (MOR), ethylene glycol oxidation reaction (EGOR), and glycerol oxidation reaction (GOR). Remarkably, owing to the enhanced electron transfer brought by the introduction of the Ru-PdRu heterogeneous interface, these novel nanosheets are highly durable. Apart from being able to maintain the highest current density after 4000 s chronoamperometry test, Ru-PdRu HNSs can be reactivated with negligible activity loss in MOR and GOR test after four consecutive i-t experiments. Impressively, in the EGOR test, after reactivation, the current density is step-wisely increased, making it one of the best AOR electrocatalysts.

Photoelectrocatalytic oxidation of ethylene glycol on trimetallic PdAgCu nanospheres enhanced by surface plasmon resonance

The notable surface plasmon resonance (SPR) effect of some metals has been applied to improve the efficiency of alcohol oxidation reactions, whereas the comprehensive investigation of Cu-assisted photoelectrocatalysis remains challenging. We herein successfully prepared trimetallic PdAgCu nanospheres (NSs) with abundant surface bulges for the advanced ethylene glycol oxidation reaction (EGOR) and compared them with bimetallic PdAg NSs to investigate the performance enhancement mechanism. Impressively, the as-optimized PdAgCu NSs exhibited superb mass activity and electrochemical stability. Moreover, under visible light illumination, the mass activity of PdAgCu NSs increased to 1.62 times compared to that in the dark, and in contrast, the mass activity of PdAg NSs only increased to 1.48 times that in the dark. A mechanistic study indicated that the incorporation of Cu not only strengthens the whole SPR effect of PdAgCu NSs but also further modifies the electronic structure of Pd. This work highlighted that the incorporation of Cu into PdAg NSs further enhanced the photoelectrocatalytic performance and increased noble metal atom utilization, which may provide guidance to fabricate novel and promising nanocatalysts in the field of photoelectrocatalysis.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Micron-Scale Fabrication of Ultrathin Amorphous Copper Nanosheets Templated by DNA Scaffolds

Two-dimensional (2D) amorphous materials could outperform their crystalline counterparts toward various applications because they have more defects and reactive sites and thus could exhibit a unique surface chemical state and provide an advanced electron/ion transport path. Nevertheless, it is challenging to fabricate ultrathin and large-sized 2D amorphous metallic nanomaterials in a mild and controllable manner due to the strong metallic bonds between metal atoms. Here, we reported a simple yet fast (10 min) DNA nanosheet (DNS)-templated method to synthesize micron-scale amorphous copper nanosheets (CuNSs) with a thickness of 1.9 ± 0.4 nm in aqueous solution at room temperature. We demonstrated the amorphous feature of the DNS/CuNSs by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Interestingly, we found that they could transform to crystalline forms under continuous electron beam irradiation. Of note, the amorphous DNS/CuNSs exhibited much stronger photoemission (∼62-fold) and photostability than dsDNA-templated discrete Cu nanoclusters due to the elevation of both the conduction band (CB) and valence band (VB). Such ultrathin amorphous DNS/CuNSs hold great potential for practical applications in biosensing, nanodevices, and photodevices.

Pd-Based Metallenes for Fuel Cell Reactions

Pd-based metallenes, atomically thin layers composed primarily of under-coordinated Pd atoms, have emerged as the newest members in the family of two-dimensional (2D) nanomaterials. Moreover, the unique physiochemical properties, high intrinsic activity associated with metallenes coupled with the ease of applying chemical modifications result in great potential in catalyst engineering for fuel cell reactions. Especially in recent years, interest in Pd-based metallenes is growing, as evidenced by surge in available literatures. Herein, we have reviewed the recent findings achieved in Pd-based metallenes in fuel cells by highlighting the technologies available for deriving metallenes and manifesting the modification strategies for designing them to better suit the application demand. Moreover, we also discuss the perspective insights of Pd-based metallenes for fuel cells regarding the surfactant-free synthesis method, strain engineering, constructing high-entropy alloy, and so on.

Maneuvering the Peroxidase-Like Activity of Palladium-Based Nanozymes by Alloying with Oxophilic Bismuth for Biosensing

Engineering the catalytic performance of nanozymes is of vital importance for their broad applications in biological analysis, cancer treatment, and environmental management. Herein, a strategy to boost the peroxidase-like activity of Pd-based nanozymes with oxophilic metallic bismuth (Bi) is demonstrated, which is based on the incorporation of oxophilic Bi in the Pd-based alloy nanocrystals (NCs). To synthesize PdBi alloy NCs, a seed-mediated method is employed with the assistance of underpotential deposition (UPD) of Bi on Pd. The strong interaction of Bi atoms with Pd surfaces favors the formation of alloy structures with controllable shapes and excellent monodispersity. More importantly, the PdBi NCs show excellent peroxidase-like activities compared with pristine Pd NCs. The structure-function correlations for the PdBi nanozymes are elucidated, and an indirect colorimetric method based on cascade reactions to determine alkaline phosphatase (ALP) is established. This method has good linear range, low detection limit, excellent selectivity, and anti-interference. Collectively, this work not only provides new insights for the design of high-efficiency nanozymes, expands the colorimetric sensing platform based on enzyme cascade reactions, but also represents a new example for UPD-directed synthesis of alloy NCs.

Laser induced trace doping of Pd on Ru nanoparticles for an efficient hydrogen evolution electrocatalyst

Improving the activity and stability of electrocatalysts for the hydrogen evolution reaction (HER) plays an essential role in the practical application of electrochemical water splitting under alkaline conditions. Here, trace Pd-doped Ru nanoparticles have been achieved using the pulsed laser ablation in liquid technology, which exhibit efficient HER catalytic performance. It is evidenced that the Pd doping amount is maintained at a trace level and increases nonlinearly with the concentration of the Pd precursor. Molecular dynamics simulations demonstrate that the trace doping of Pd is due to the slow thermal decomposition rate of the Pd precursor. This work improves the mechanistic explanation of the metal doping induced by liquid-phase laser ablation, which may promote the fabrication and application of advanced laser-based nanostructures.

Surface Charge-Directed Efficient and Selective Catalytic Activities of Porous M@UiO-66 Composites (M = Pt or Ag) for Reduction of Organic Pollutants

Precisely constructed porous composites containing catalytically active nanoparticles can stabilize unstable nanoparticles, thus improving catalytic activity and longevity while preventing agglomeration of active nanoparticles. Herein, we report the confined incorporation of highly active metal nanoparticles within a metal-organic framework support and efficient catalytic performances in the reduction of organic pollutants, such as methylene blue (MB) and 4-nitrophenol (4-NP). UiO-66-based porous composites (M@UiO-66, M = Pt or Ag) containing well-dispersed metal nanoparticles are constructed via the one-step thermal treatment of UiO-66 implanted with metal ions (UiO-66/Mⁿ⁺, Mⁿ⁺ = Pt²⁺ or Ag⁺). The comprehensive features of M@UiO-66s, such as well-dispersed nanocatalysts, well-developed pores, and characteristic surface charges, expedite not only efficient but also selective catalytic activities in the reduction of MB or 4-NP, along with impressive recyclability.

Atomically Dispersed MoOx on Rhodium Metallene Boosts Electrocatalyzed Alkaline Hydrogen Evolution

Accelerating slow water dissociation kinetics is key to boosting the hydrogen evolution reaction (HER) in alkaline media. We report the synthesis of atomically dispersed MoO_x species anchored on Rh metallene using a one-pot solvothermal method. The resulting structures expose the oxide-metal interfaces to the maximum extent. This leads to a MoO_x -Rh catalyst with ultrahigh alkaline HER activity. We obtained a mass activity of 2.32 A mg_Rh ^-1 at an overpotential of 50 mV, which is 11.8 times higher than that of commercial Pt/C and surpasses the previously reported Rh-based electrocatalysts. First-principles calculations demonstrate that the interface between MoO_x and Rh is the active center for alkaline HER. The MoO_x sites preferentially adsorb and dissociate water molecules, and adjacent Rh sites adsorb the generated atomic hydrogen for efficient H₂ evolution. Our findings illustrate the potential of atomic interface engineering strategies in electrocatalysis.

Near infrared optically responsive Ag-Cu bimetallic 2D nanocrystals with controllable spatial structures

The optical properties of cost-effective Ag-Cu bimetallic nanocrystals, with synergistically enhanced catalytic and biological activities, are limited within ultraviolet-visible region due to lack of morphology control. In order to overcome this constraint, two-dimensional (2D) Ag-Cu bimetallic heterostructures were designed and synthesized by a seed-mediated colloidal growth method. The conformal Cu domain was epitaxially deposited on Ag nanoplates with different spatial configuration under retention of their 2D shape. Both of the 2D Ag-Cu core@shell and Janus structures display tunable localized surface plasmon resonance from visible to near infrared regions. The results of catalytic reduction of 4-nitrophenol show that the 2D Ag-Cu core@shell structure has better synergistic catalytic performance than Janus structure and Ag plates. In addition to surface-related synergistically enhanced bactericidal performance, their antibacterial effect can also be significantly enhanced by near infrared light irradiation. These results indicate that 2D Ag-Cu heterostructures can benefit from both synergistically improved surface activity and great optical responsive characteristics.

Biaxially Compressive Strain in Ni/Ru Core/Shell Nanoplates Boosts Li-CO2 Batteries

Regulating surface strain of nanomaterials is an effective strategy to manipulate the activity of catalysts, yet not well recognized in rechargeable Li-CO₂ batteries. Herein, biaxially compressive strained nickel/ruthenium core/shell hexagonal nanoplates (Ni/Ru HNPs) with lattice compression of ≈5.1% and ≈3.2% in the Ru {10-10} and (0002) facets are developed as advanced catalysts for Li-CO₂ batteries. It is demonstrated that tuning the electronic structure of Ru shell through biaxially compressive strain engineering can boost the kinetically sluggish CO₂ reduction and evolution reactions, thus achieving a high-performance Li-CO₂ battery with low charge platform/overpotential (3.75 V/0.88 V) and ultralong cycling life (120 cycles at 200 mA g^-1 with a fixed capacity of 1000 mAh g^-1 ). Density functional theory calculations reveal that the biaxially compressive strain can downshift the d-band center of surface Ru atoms and thus weaken the binding of CO₂ molecules, which is energetically beneficial for the nucleation and decomposition of Li₂ CO₃ crystals during the discharge and charge processes. This study confirms that strain engineering, though constructing a well-defined core/shell structure, is a promising strategy to improve the inherent catalytic activity of Ru-based materials in Li-CO₂ batteries.

Insight into the effects of the crystal phase of Ru over ultrathin Ru@Pt core-shell nanosheets for methanol electrooxidation

Coating a second metal on the surface of ultrathin 2D nanosheets (NSs) could induce lattice strain and modify the electronic structure, thereby changing the surface reactivity. Herein, we report the effects of different crystal phases of Ru on the electrocatalytic performance of ultrathin Ru@Pt core-shell NSs for the methanol oxidation reaction (MOR). Importantly, Ru with a novel face-centered-cubic phase was found to have more effect on the electronic structure of Pt than Ru with a conventional hexagonal close-packed phase, thereby leading to improved electrocatalytic activity toward the MOR under acidic and basic conditions. It is believed that the strategy presented here would offer a new approach to the construction of bimetallic core-shell nanostructures with various promising applications.

Preparation of Two-Dimensional Pd@Ir Nanosheets and Application in Bacterial Infection Treatment by the Generation of Reactive Oxygen Species

Noble metal nanozymes have shown great promise in biomedicine; however, developing novel and high-performance noble metal nanozymes is still highly pressing and challenging. Herein, we, for the first time, prepared two-dimensional (2D) Pd@Ir bimetal nanosheets (NSs) with well-defined size and composition by a facile seed-mediated growth strategy. Enzyme-mimicked investigations find that the Pd@Ir NSs possess oxidase (OXD)-, peroxidase (POD)-, and catalase (CAT)-like multienzyme-mimetic activities. Especially, they exhibited much higher OXD- and POD-like activities than individual Pd NSs and Ir nanoparticles (NPs). The density functional theory (DFT) calculations reveal that the adsorption energy of O2 on Pd@Ir NSs is lower than that on the pure Pd NSs, which is more favorable for the conversion of O2 molecules from the triplet state (3O2) into the singlet state (1O2). Finally, based on the outstanding nanozyme activities to yield highly active singlet oxygen (1O2) and hydroxyl radicals (•OH) as well as excellent biosafety, the as-prepared Pd@Ir NSs were applied to treat bacteria-infected wounds, and satisfactory therapeutic outcomes were achieved. We believe that the highly efficient 2D Pd@Ir nanozyme will be an effective therapeutic reagent for various biomedical applications.

The ultrathin palladium nanosheets for sensitive and visual Hg2+ detection in the food chain

The detection of mercury, one of the ten most dangerous chemicals, is significant to provide helpful information for assessing mercury toxicity and health risks. However, it is a challenge to explore simple, sensitive, accurate, and cheap Hg²⁺ detection methods. Noble metal nanomaterials are used for Hg²⁺ detection by the colorimetric method widely. Still, the pure noble metal materials' detection limit of Hg²⁺ is high, and sensitivity enhancement usually requires further complex modification. Here, we use a facile one-step route to synthesize ultra-thin two-dimensional palladium nanosheets (PdNS), which have high selectivity and sensitivity for Hg²⁺ detection by colorimetric method with a low detection limit (0.55 ppb). The detection of Hg²⁺ by PdNS involves multiple mechanisms, including the formation of amalgam and PdO to improve the peroxidase-mimic activity of PdNS and PdNS motor function to increase its collision probability with the detection reactant. The PdNS can be used to detect Hg²⁺ in various actual samples. The detection results are highly consistent with the data obtained by the atomic fluorescence spectrometer (AFS). Then, we developed a Hg²⁺ detection kit, which can realize simple, sensitive, and accurate Hg²⁺ detection by naked eye or cellphone at a meager cost (0.3 dollars each sample).

Emerging interstitial/substitutional modification of Pd-based nanomaterials with nonmetallic elements for electrocatalytic applications

Palladium (Pd)-based nanomaterials have been identified as potential candidates for various types of electrocatalytic reaction, but most of them typically exhibit unsatisfactory performances. Recently, extensive theoretical and experimental studies have demonstrated that the interstitial/substitutional modification of Pd-based nanomaterials with nonmetallic atoms (H, B, C, N, P, S) has a significant impact on their electronic structure and thus leads to the rapid development of one kind of promising catalyst for various electrochemical reactions. Considering the remarkable progress in this area, we highlight the most recent progress regarding the innovative synthesis and advanced characterization methods of nonmetallic atom-doped Pd-based nanomaterials and provide insights into their electrochemical applications. What's more, the unique structure- and component-dependent electrochemical performance and the underlying mechanisms are also discussed. Furthermore, a brief conclusion about the recent progress achieved in this field as well as future perspectives and challenges are provided.

Facile Synthesis of Pd and PdPtNi Trimetallic Nanosheets as Enhanced Oxygen Reduction Electrocatalysts

While bimetallic 2D metallic nanomaterials are widely synthesized and used as electrocatalysts with enhanced performance, trimetallic 2D structures are less commonly reported. In this work, a facile wet chemical method for synthesizing Pd nanosheets and PdPtNi trimetallic alloy nanosheets is developed. Without the introduction of gaseous CO and pressurized equipment, Pd nanosheets with a thickness of ≈2.85 nm and sizes in the range of 1-2 µm can be obtained. The facile synthesis conditions allow for a comprehensive study of the nanosheet growth mechanism. It is found that 2D growth is closely related to the product of solvent decomposition and the additive ligand diethylenetriamine. Further, by depositing Pt and Ni onto the Pd nanosheets, trimetallic nanosheets with tunable compositions can be obtained and applied as oxygen reduction reaction electrocatalysts. Typically, the Pd₉ Pt₁ Ni₁ nanosheets have the highest half-wave potential of 0.928 V (vs reversible hydrogen electrode), which is 34 mV higher than that of commercial Pt/C and 28 mV higher than that of Pd/C, and also have high durability.

Synthesis of Pd3 Sn and PdCuSn Nanorods with L12 Phase for Highly Efficient Electrocatalytic Ethanol Oxidation

The crystal phase of nanomaterials is one of the key parameters determining their physicochemical properties and performance in various applications. However, it still remains a great challenge to synthesize nanomaterials with different crystal phases while maintaining the same composition, size, and morphology. Here, a facile, one-pot, wet-chemical method is reported to synthesize Pd₃ Sn nanorods with comparable size and morphology but different crystal phases, that is, an ordered intermetallic and a disordered alloy with L1₂ and face-centered cubic (fcc) phases, respectively. The crystal phase of the as-synthesized Pd₃ Sn nanorods is easily tuned by altering the types of tin precursors and solvents. Moreover, the approach can also be used to synthesize ternary PdCuSn nanorods with the L1₂ crystal phase. When used as electrocatalysts, the L1₂ Pd₃ Sn nanorods exhibit superior electrocatalytic performance toward the ethanol oxidation reaction (EOR) compared to their fcc counterpart. Impressively, compared to the L1₂ Pd₃ Sn nanorods, the ternary L1₂ PdCuSn nanorods exhibit more enhanced electrocatalytic performance toward the EOR, yielding a high mass current density up to 6.22 A mg_Pd ^-1 , which is superior to the commercial Pd/C catalyst and among the best reported Pd-based EOR electrocatalysts.

A self-activated cascade nanoreactor based on Pd-Ru/GOx for bacterial infection treatment

Enzyme cascade reaction that integrated nature enzyme and nanozyme has attracted intensive attention in biomedical studies. Nevertheless, it is still an important challenge to design simple, high-performance and safe cascade...

In situ nanopores enrichment of Mesh-like palladium nanoplates for bifunctional fuel cell reactions: A joint etching strategy

Two-dimensional (2D) nanomaterials with nanopore display an enhancement effect on electrocatalysis behavior, whereas the nanopore engineering for 2D nanocatalysts remains an insurmountable challenge. We advance the synthesis of multilayer Pd nanoplates (Pd NPs) and two types of meshy nanoplates (Pd LMNPs/MNPs) with escalating nanopores from none and sparse to porous. Specially, an in situ nanopore enrichment on these Pd nanoplates hinges on a joint etching strategy with integrated manipulation of reaction kinetics. The optimized Pd MNPs exhibit exceptional oxygen reduction reaction performance, owing to the enhanced intermediates protonation on Pd site neighboring nanopore, which has been elucidated by density functional theory calculations. In addition, Pd MNPs also deliver excellent performances in fuel cell anodic reactions, including ethanol oxidation reaction and formic acid oxidation reaction. This study highlights a new strategy for in situ nanopores engineering, providing a prospect for designing superior nanocatalysts.

Insight into the Morphology-Dependent Catalytic Performance of CuO/CeO2 Produced by Tannic Acid for Efficient Hydrogenation of 4-Nitrophenol

The construction of a heterogeneous nanocatalyst with outstanding catalytic performance via an environmentally benign and cost-effective synthetic category has long been one of the challenges in nanotechnology. Herein, we synthesized highly efficient and low-cost mesoporous morphology-dependent CuO/CeO₂ -Rods and CuO/CeO₂ -Cubes catalysts by employing a green and multifunctional polyphenolic compound (tannic acid) as the stabilizer and chelating agent for 4-nitrophenol (4-NP) reduction reaction. The CuO/CeO₂ -Rods exhibited excellent performance, of which the activity was 3.2 times higher than that of CuO/CeO₂ -Cubes. This can be connected with the higher density of oxygen vacancy on CeO₂ -Rods (110) than CeO₂ -Cubes (100), the oxygen vacancy favors anchoring CuO species on the CeO₂ support, which promotes the strong interaction between finely dispersed CuO and CeO₂ -Rods at the interfacial positions and facilitates the electron transfer from BH₄ ^- to 4-NP. The synergistic catalytic mechanism illustrated that 4-NP molecules preferentially adsorbed on the CeO₂ , while H₂ from BH₄ ^- dissociated over CuO to form highly active H* species, contributing to achieving efficient hydrogenation of 4-NP. This study is expected to shed light on designing and synthesizing cost-effective and high-performance nanocatalysts through a greener synthetic method for the areas of catalysis, nanomaterial science and engineering, and chemical synthesis.

A Novel Cascade Nanoreactor Integrating Two-Dimensional Pd-Ru Nanozyme, Uricase and Red Blood Cell Membrane for Highly Efficient Hyperuricemia Treatment

Nanozyme-based cascade reaction has emerged as an effective strategy for disease treatment because of its high efficiency and low side effects. Herein, a new and highly active two-dimensional Pd-Ru nanozyme is prepared and then integrated with uricase and red blood cell (RBC) membrane to fabricate a tandem nanoreactor, Pd-Ru/Uricase@RBC, for hyperuricemia treatment. The designed Pd-Ru/Uricase@RBC nanoreactor displayed not only good stability against extreme pH, temperature and proteolytic degradation, but also long circulation half-life and excellent safety. The nanoreactor can effectively degrade UA by uricase to allantoin and H₂ O₂ and remove H₂ O₂ by using Pd-Ru nanosheets (NSs) with the catalase (CAT)-like activity. More importantly, the finally produced O₂ from H₂ O₂ decomposition can in turn facilitate the catalytic oxidation of UA, as the degradation of UA is an O₂ consumption process. By integrating the high-efficiency enzymatic activity, long circulation capability, and good biocompatibility, the designed Pd-Ru/Uricase@RBC can effectively and safely treat hyperuricemia without side effects. The study affords a new alternative for the exploration of clinical treatment of hyperuricemia.

Atomic-level ablation of Au@Ag NRs using ultrafast laser excitation

Metallic nanorods (NRs) are an important class of materials with widespread applications because of their appealing tunable plasmon resonances, high photothermal conversion efficiency, and chemical stability. It is essential to control the shape and atomic structures of metallic NRs for practical applications. Laser processing of metallic NRs relying on light-matter interactions provides many opportunities. However, the atomic-level fabrication of NRs remains a challenge, and the understanding of laser-induced ablation is still limited. Here, we proposed the atomic-level ablation of Au@Ag NRs using ultrafast laser excitation, which suggests that the near-field effect plays a key role in comparison with thermal evaporation. Through ultrafast laser pulse excitation, abundant atomic steps are fabricated in Au@Ag NRs, which can enhance the surface activity. We suggest that this study highlights the role of the laser near-field effect and also provides a facile strategy to tailor the external shape of metallic NRs at the atomic level, opening a pathway to design metallic NRs for energy and environmental applications.

Emerging beyond-graphene elemental 2D materials for energy and catalysis applications

Elemental two-dimensional (2D) materials have emerged as promising candidates for energy and catalysis applications due to their unique physical, chemical, and electronic properties. These materials are advantageous in offering massive surface-to-volume ratios, favorable transport properties, intriguing physicochemical properties, and confinement effects resulting from the 2D ultrathin structure. In this review, we focus on the recent advances in emerging energy and catalysis applications based on beyond-graphene elemental 2D materials. First, we briefly introduce the general classification, structure, and properties of elemental 2D materials and the new advances in material preparation. We then discuss various applications in energy harvesting and storage, including solar cells, piezoelectric and triboelectric nanogenerators, thermoelectric devices, batteries, and supercapacitors. We further discuss the explorations of beyond-graphene elemental 2D materials for electrocatalysis, photocatalysis, and heterogeneous catalysis. Finally, the challenges and perspectives for the future development of elemental 2D materials in energy and catalysis are discussed.

Nanozyme with Robust Catalase Activity by Multiple Mechanisms and Its Application for Hypoxic Tumor Treatment

Utilizing catalase-mimicking nanozymes to produce O₂ is an effective method to overcome tumor hypoxia. However, it is challenging to fabricate nanozymes with ultrahigh catalytic activity. Palladium nanosheet (Pd NS), a photothermal agent for photothermal therapy (PTT), has superior catalase-mimicking activity. Here, titanium dioxide (TiO₂ ) is used to modify Pd NS (denoted Pd@TiO₂ ) by a simple one-step method to improve its catalytic activity about 8 times. The enhancement mechanism's fundamental insights are discussed through experiments and density functional theory calculations. Next, zinc phthalocyanine is loaded on Pd@TiO₂ to form a nanomotor (denoted PTZCs) with the synergistic activities of photodynamic therapy and PTT. PTZCs inherit the catalase activity of Pd@TiO₂ to facilitate the decomposition of endogenous H₂ O₂ to O₂ , which can relieve tumor hypoxia and propel PTZC migration to expand the reach of PTZCs, further enhancing its synergistic treatment outcome both in vitro and in vivo. It is proposed that this work can provide a simple and effective strategy for catalytic activity enhancement and bring a critical new perspective to studying and guiding the nanozyme design.

Facile Synthesis of PdCuRu Porous Nanoplates as Highly Efficient Electrocatalysts for Hydrogen Evolution Reaction in Alkaline Medium

Ru is a key component of electrocatalysts for hydrogen evolution reaction (HER), especially in alkaline media. However, the catalytic activity and durability of Ru-based HER electrocatalysts are still far from satisfactory. Here we report a solvothermal approach for the synthesis of PdCuRu porous nanoplates with different Ru compositions by using Pd nanoplates as the seeds. The PdCuRu porous nanoplates were formed through underpotential deposition (UPD) of Cu on Pd, followed by alloying Cu with Pd through interdiffusion and galvanic replacement between Cu atoms and Ru precursor simultaneously. When evaluated as HER electrocatalysts, the PdCuRu porous nanoplates exhibited excellent catalytic activity and durability. Of them, the Pd24Cu29Ru47/C achieved the lowest overpotential (40.7 mV) and smallest Tafel slope (37.5 mV dec−1) in an alkaline solution (much better than commercial Pt/C). In addition, the Pd24Cu29Ru47/C only lost 17% of its current density during a stability test for 10 h, while commercial Pt/C had a 59.5% drop under the same conditions. We believe that the electron coupling between three metals, unique porous structure, and strong capability of Ru for water dissociation are responsible for such an enhancement in HER performance.

Nanoscaled and Atomic Ruthenium Electrocatalysts Confined Inside Super-Hydrophilic Carbon Nanofibers for Efficient Hydrogen Evolution Reaction

A series of Ru-based catalysts have been developed for the hydrogen evolution reaction (HER) by the facile impregnation of copious and eco-friendly bacterial cellulose (BC) with Ru(bpy)₃ Cl₂ (bpy = 2,2'-bipyridine) followed by pyrolysis. After the oxidation and molecular recomposition processes that occur within the BC precursors during pyrolysis, sub-2 nm Ru nanoparticles (NPs) and atomic Ru species confined within surface-oxidized N-doped carbon nanofibers (CNFs) can be observed in the derived catalysts. The surface oxidation of CNFs leads the derived catalysts with super hydrophilicity and water-absorbing capacity, and also provides dimensional confinement for the nanoscaled and atomic Ru species. With these added structural advantages and the component synergy, the derived catalysts show superior HER activities, for which the overpotentials are as low as 19.6 mV (1 m KOH) and 55.0 mV (0.5 m H₂ SO₄ ) for the most active case at the current density of 10 mA cm^-2 . Moreover, superior HER activity can be also achieved for the catalysts derived with a wide range of Ru loadings. Finally, the influence of Ru NP size on HER activity is investigated by density functional theory simulations. This method provides a reliable protocol for preparing highly active HER catalysts for scale-up applications.

Ultrafast Laser-Induced Atomic Structure Transformation of Au Nanoparticles with Improved Surface Activity

Metallic nanoparticles (NPs) play a significant role in nanocatalytic systems, which are important for clean energy conversion, storage, and utilization. Laser fabrication of metallic NPs relying on light-matter interactions provides many opportunities. It is essential to study the atomic structure transformation of nonactive monocrystalline metallic NPs for practical applications. The high-density stacking faults were fabricated in monocrystalline Au NPs through tuning the ultrafast laser-induced relaxation dynamics, and the thermal and dynamic stress effects on the atomic structure transformation were revealed. The atomic structure transformation mainly arises from the thermal effect, and the dynamic stress distribution induced by local energy deposition gives rise to the generation of stacking faults. Au NPs with abundant stacking faults show enhanced surface activity owing to their low coordination number. We suggest that this work expands the knowledge of laser-metallic nanomaterial interactions and provides a method for designing metallic NPs for a wide range of applications.

One-pot synthesis of rugged PdRu nanosheets as the efficient catalysts for polyalcohol electrooxidation

Recently, intensive attention has been attracted to the two-dimensional metal nanosheets, owing to their excellent electrocatalytic performance for direct alcohol fuel cells (DAFCs). Herein, PdRu nanosheets have been synthesized successfully by a facile one-pot method. The rugged nanosheet structure provided plentiful surface active sites to enhance the electrocatalytic activity. Moreover, benefiting from the synergistic effect and improved electronic structure, PdRu NSs exhibited splendid electrocatalytic performance in ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). Specifically, the mass activity of PdRu NSs was 1.72 and 3.69 times over those of Pd NSs and Pd/C catalysts in EGOR. Moreover, PdRu NSs displayed the largest mass activity in GOR, 1.48 and 2.47 times as large as Pd NSs and Pd/C catalysts. The results of stability tests demonstrated that the durability of PdRu NSs was the highest among the obtained catalysts. This work plays a directive role on the in-depth engineering on Pd-based catalysts with nanosheet architectures.

An electrochemical biosensor based on hemin/G-quadruplex DNAzyme and PdRu/Pt heterostructures as signal amplifier for circulating tumor cells detection

Metastasis due to circulating tumor cells (CTCs) shed from the original tumor accounts for the majority of cancer-related death. Efficient CTCs detection is pivotal to the diagnosis of early cancer metastasis. In this work, Platinum nanoparticles (PtNPs) decorated hyperbranched PdRu nanospines (PdRu/Pt) hierarchical structures were firstly synthesized to detect CTCs with the assistance of DNAzyme. Meanwhile, Super P and gold nanoparticles (AuNPs) acted as sensing medium to improve electrical conductivity and immobilization of anti-EpCAM antibody to specifically capture model CTCs. After immune-conjugation of anti-EpCAM-MCF-7-signal probes on the gold electrode, PtNPs, PdRu nanospines (PdRuNSs) and hemin/G-quadruplex co-catalyzed substrate H₂O₂ to realize multiplexed signal amplification, which significantly improves the analytical performance of the electrochemical biosensor. As-proposed biosensor reached a limit of detection (LOD) down to 2 cells mL^-1 and showed a wide detection range of 2 to 10⁶ cells mL^-1. Application of the biosensor to detect MCF-7 cells spiked human blood samples further demonstrated the feasibility for early cancer evaluation in clinic.

Surface Plasmon Resonance Boost Electrocatalytic Alcohol Oxidation over Three-Dimensional PdM (M = Au, Ag, Cu) Nanosheet Assemblies

Photoelectrocatalytic nanomaterials are promising for direct alcohol fuel cells, but the construction of high-efficiency catalysts remains difficult. We herein successfully synthesized three-dimensional (3D) PdM nanosheet assemblies (PdM NSAs, M = Au, Ag, and Cu) through a seed-mediated growth method, which displayed a typical 3D nanoflower morphology assembled from many two-dimensional ultrathin nanosheets. Due to the open 3D structure and the synergistic and electronic effects between Pd and Ag, the optimized PdAg NSAs showed the highest mass activity (9378 mA mg^-1) for the ethylene glycol oxidation reaction. More interestingly, when irradiated with visible light, the mass activity increased to 14 590 mA mg^-1, 12.1 times higher than that of the commercial Pd/C (1205 mA mg^-1). In addition, the as-obtained catalysts also showed better long-term durability than that of the commercial Pd/C under the condition of with or without visible-light illumination. This work highlights the utilization of light energy in designing excellent photoelectrocatalysts to promote the photoelectrocatalytic performance of anode catalysts for fuel cells.

Surface engineering of Rh-modified Pd nanocrystals by colloidal underpotential deposition for electrocatalytic methanol oxidation

The development of methods to control the surface structures of metallic nanocatalysts is of vital importance for their application as heterogeneous catalysts in chemical conversions of energy and environmental and chemical engineering. The underpotential deposition (UPD) phenomenon has received considerable interest as a tool for the controllable synthesis of metal nanocrystals and engineering their catalytic performances. Herein, the discovery of UPD of Rh on Pd nanocrystals is reported. More importantly, the UPD of Rh is explored as a strategy to direct the synthesis of Rh-modified Pd nanocrystals with controllable shapes and surface structures. The mechanism of the UPD of Rh on Pd is elucidated in terms of electronegativity difference considerations. Compared with pristine Pd octahedral nanocrystals and commercial carbon-supported Pd catalysts, the Rh-modified Pd octahedral nanocrystals exhibit remarkable electrocatalytic performances during the methanol oxidation reaction in alkaline media. Our discovery heralds a new paradigm for UPD-mediated growth of metal nanocrystals and may provide a mechanistic understanding for the guided design of other colloidal UPD systems in the synthesis and surface engineering of metal nanocrystals.

Recent Progress of Ultrathin 2D Pd-Based Nanomaterials for Fuel Cell Electrocatalysis

Pd- and Pd-based catalysts have emerged as potential alternatives to Pt- and Pt-based catalysts for numerous electrocatalytic reactions, particularly fuel cell-related reactions, including the anodic fuel oxidation reaction (FOR) and cathodic oxygen reduction reaction (ORR). The creation of Pd- and Pd-based architectures with large surface areas, numerous low-coordinated atoms, and high density of defects and edges is the most promising strategy for improving the electrocatalytic performance of fuel cells. Recently, 2D Pd-based nanomaterials with single or few atom thickness have attracted increasing interest as potential candidates for both the ORR and FOR, owing to their remarkable advantages, including high intrinsic activity, high electron mobility, and straightforward surface functionalization. In this review, the recent advances in 2D Pd-based nanomaterials for the FOR and ORR are summarized. A fundamental understanding of the FOR and ORR is elaborated. Subsequently, the advantages and latest advances in 2D Pd-based nanomaterials for the FOR and ORR are scientifically and systematically summarized. A systematic discussion of the synthesis methods is also included which should guide researchers toward more efficient 2D Pd-based electrocatalysts. Lastly, the future outlook and trends in the development of 2D Pd-based nanomaterials toward fuel cell development are also presented.

Ultrasonic-assisted synthesis of two dimensional coral-like Pd nanosheets supported on reduced graphene oxide for enhanced electrocatalytic performance

Two dimensional (2D) Pd nanosheets supported on reduced graphene oxide (Pd/rGO) were prepared through a sonochemical routine induced by cetyltrimethylammonium bromide (CTAB). Coral-like porous Pd nanosheets (Pd/rGO-u) were obtained under the sonication condition (25 kHz, 600 W, ultrasonic transducer), while square Pd nanosheets (Pd/rGO-c) were produced via traditional chemical reduction. The size of Pd nanosheets of Pd/rGO-u and Pd/rGO-c are 69.7 nm and 59.7 nm, and the thickness are 4.6 nm and 4.4 nm, respectively. The carrier GO was proved to be partially reduced to rGO with good electrical conductivity and oxygen-containing groups facilitated a good dispersion of Pd nanosheets. The interaction between GO and CTAB made the alkyl chain assembles to a 2D lamella micelles which limit the growth of Pd atoms resulting in the formation of 2D nanosheets. A high ultrasonic power promotes the reduction and the formation of porous structure. Additionally, Pd/rGO-u exhibited a favorable electrocatalytic performance toward oxygen reduction reaction (ORR) in alkaline condition, which provided a potential synthetic strategy assisted by sonication for high-performance 2D materials.

Self-supporting hierarchical PdCu aerogels for enhanced catalytic reduction of 4-nitrophenol

This work reports a new kind of self-assembled PdCu monolithic aerogels via a mild reduction process, which exhibits highly efficient catalytic reduction activity towards 4-nitrophenol. The enhanced catalytic reduction performance can be contributed the following unique features of PdCu aerogels: 1) the interconnected channels and three-dimensional network provide a platform for accelerating mass transfer during catalysis; 2) metallic aerogels combined with stretching ultrathin nanowires has a large surface area and good crystallinity affording sufficient reactive sites and high atom utilization; 3) the introduction of nonprecious Cu not only drastically cuts down the cost but also attains the excellent catalytic activity due to the bimetallic intrinsic synergetic effect; 4) the self-supporting feature is good for improving the durability of the catalyst. This study pushes a new avenue to develop robust catalysts for heterogeneous catalytic reactions.

Plasmonic Metallic Heteromeric Nanostructures

Binary, ternary, and other high-order plasmonic heteromers possess remarkable physical and chemical properties, enabling them to be used in numerous applications. The seed-mediated approach is one of the most promising and versatile routes to produce plasmonic heteromers. Selective growth of one or multiple domains on desired sites of noble metal, semiconductor, or magnetic seeds would form desired heteromeric nanostructures with multiple functionalities and synergistic effects. In this work, the challenges for the synthetic approaches are discussed with respect to tuning the thermodynamics, as well as the kinetic properties (e.g., pH, temperature, injection rate, among others). Then, plasmonic heteromers with their structure advantages displaying unique activities compared to other hybrid nanostructures (e.g., core-shell, alloy) are highlighted. Some of the main most recent applications of plasmonic heteromers are also presented. Finally, perspectives for further exploitation of plasmonic heteromers are demonstrated. The goal of this work is to provide the current know-how on the synthesis routes of plasmonic heteromers in a summarized manner, so as to achieve a better understanding of the resulting properties and to gain an improved control of their performances and extend their breadth of applications.

Pt-on-Pd Dendritic Nanosheets with Enhanced Bifunctional Fuel Cell Catalytic Performance

Pd-Pt bimetallic nanocrystals have become appealing in the electrocatalytic field by virtue of their synergy effects derived from the electronic coupling between two metals. Herein, a facile seed-mediated growth approach is reported for synthesis of Pt-on-Pd dendritic nanosheets (DNSs) through the growth of Pt branches on ultrathin Pd nanosheets (NSs). The as-obtained Pt-on-Pd DNSs exhibit superior catalytic activity toward both oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR), with mass activities (MAs) 2.2 times higher for ORR and 3.4 times higher for MOR than commercial Pt/C catalysts. Moreover, these spatially separated Pt branches supported on 2D NSs also endow the Pt-on-Pd DNSs with impressive durability for ORR with only 18.9% loss in MA, whereas the Pt/C catalyst loses 50.0% after 10,000-cycle accelerated durability tests. This 2D DNS architecture can be extended to other 2D metallic NS substrates for constructing Pt-based electrocatalysts with excellent electrocatalytic performance.