AIE Nanoparticles with High Stimulated Emission Depletion Efficiency and Photobleaching Resistance for Long-Term Super-Resolution Bioimaging

Multiquenching-Based Aggregation-Induced Electrochemiluminescence Sensing for Highly Sensitive Detection of the SARS-CoV-2 N Protein

The rapid epidemic around the world of coronavirus disease 2019 (COVID-19), caused by the SARS-CoV-2 virus, proves the need and stimulates efforts to explore efficient diagnostic tests for the sensitive detection of the SARS-CoV-2 virus. An aggregation-induced electrochemiluminescence (AIECL) sensor was developed for the ultrasensitive detection of the SARS-CoV-2 nucleocapsid (N) protein in this work. Tetraphenylethylene doped in zeolite imidazole backbone-90 (TPE-ZIF-90) showed highly efficient aggregation-induced emission (AIE) to endow TPE-ZIF-90 with high ECL intensity. Upon the capture of the SARS-CoV-2 N protein by immune recognition, an alkaline phosphatase (ALP)-modified gold nanoparticle (AuNP)-decorated zinc oxide (ZnO) nanoflower (ALP/Au-ZnO) composite was introduced on the sensing platform, which catalyzed L-ascorbate-2-phosphate trisodium salt (AA2P) to produce PO43- and ascorbic acid (AA). Based on a multiquenching of the ECL signal strategy, including resonance energy transfer (RET) between TPE-ZIF-90 and Au-ZnO, disassembly of TPE-ZIF-90 triggered by the strong coordination between PO43- and Zn2+, and RET between TPE-ZIF-90 and AuNPs produced in situ by the AA reductive reaction, the constructed AIECL sensor achieved highly sensitive detection of the SARS-CoV-2 N protein with a low limit of detection of 0.52 fg/mL. With the merits of high specificity, good stability, and proven application ability, the present RET- and enzyme-triggered multiquenching AIECL sensor may become a powerful tool in the field of SARS-CoV-2 virus diagnosis.

In vivo deposition of poorly soluble drugs

Administered drug molecules, whether dissolved or solubilized, have the potential to precipitate and accumulate as solid forms in tissues and cells within the body. This phase transition can significantly impact the pharmacokinetics of treatment. It is thus crucial to gain an understanding of how drug solubility/permeability, drug formulations and routes of administration affect in vivo behaviors of drug deposition. This review examines literature reports on the drug deposition in tissues and cells of poorly water-soluble drugs, as well as underlying physical mechanisms that lead to precipitation. Our work particularly highlights drug deposition in macrophages and the subcellular fate of precipitated drugs. We also propose a tissue permeability-based classification framework to evaluate precipitation potentials of poorly soluble drugs in major organs and tissues. The impact on pharmacokinetics is further discussed and needs to be considered in developing drug delivery systems. Finally, bioimaging techniques that are used to examine aggregated states and the intracellular trafficking of absorbed drugs are summarized.

Preparation of AIEgen-based near-infrared afterglow luminescence nanoprobes for tumor imaging and image-guided tumor resection

Fluorescence imaging represents a vital tool in modern biology, oncology and biomedical applications. Afterglow luminescence (AGL), which circumvents the light scattering and tissue autofluorescence interference associated with real-time excitation source, shows remarkably increased imaging sensitivity and depth. Here we present a protocol for the design and synthesis of AGL nanoprobes with an aggregation-induced emission (AIE) effect to simultaneously red shift and amplify the afterglow signal for tumor imaging and image-guided tumor resection. The nanoprobe (AGL AIE dot) is composed of an enol ether format of Schaap's agent and a near-infrared AIE fluorogen (AIEgen) (tetraphenylethylene-phenyl-dicyanomethylene-4H-chromene, TPE-Ph-DCM) to suppress the nonradiative dissipation pathway. Pre-irradiating AGL AIE dots with white light could generate singlet oxygen to convert Schaap's agent to its 1,2-dioxetane format, thus initializing the AGL process. With the aid of AIEgen, the AGL shows simultaneously red shifted emission maximum (from ~540 nm to ~625 nm) and enhanced intensity (by 3.2-fold), facilitating better signal-to-background ratio, imaging sensitivity and depth. Intriguingly, the activated AGL can last for over 10 days. Compared with conventional approaches, our method provides a new solution to concurrently red shift and amplify afterglow signals for better in vivo imaging outcomes. The preparation of AGL AIE dots takes ~2 days, the in vitro characterization takes ~10 days (less than 1 day if not involving afterglow kinetic profile study) and the tumor imaging and image-guided tumor resection takes ~7 days. These procedures can be easily reproduced and amended after standard laboratory training in chemical synthesis and animal handling.

Recent Advances in Fluorescent Nanoparticles for Stimulated Emission Depletion Imaging

Stimulated emission depletion (STED) microscopy, as a popular super-resolution imaging technique, has been widely used in bio-structure analysis and resolving the dynamics of biological processes beyond the diffraction limit. The performance of STED critically depends on the optical properties of the fluorescent probes. Ideally, the probe should process high brightness and good photostability, and exhibit a sensitive response to the depletion beam. Organic dyes and fluorescent proteins, as the most widely used STED probes, suffer from low brightness and exhibit rapid photobleaching under a high excitation power. Recently, luminescent nanoparticles (NPs) have emerged as promising fluorescent probes in biological imaging due to their high brightness and good photostability. STED imaging using various kinds of NPs, including quantum dots, polymer dots, carbon dots, aggregation-induced emission dots, etc., has been demonstrated. This review will comprehensively review recent advances in fluorescent NP-based STED probes, discuss their advantages and pitfalls, and outline the directions for future development.

Anion-π+ AIEgens for Fluorescence Imaging and Photodynamic Therapy

Fluorescence imaging-guided photodynamic therapy (PDT) has attracted extensive attention due to its potential of real-time monitoring the lesion locations and visualizing the treatment process with high sensitivity and resolution. Aggregation-induced emission luminogens (AIEgens) show enhanced fluorescence and reactive oxygen species (ROS) generation after cellular uptake, giving them significant advantages in bioimaging and PDT applications. However, most AIEgens are unfavorable for the application in organisms due to their severe hydrophobicity. Anion-π+ type AIEgens carry intrinsic charges that can effectively alleviate their hydrophobicity and improve their binding capability to cells, which is expected to enhance the bioimaging quality and PDT performance. This concept summarizes the applications of anion-π+ type AIEgens in fluorescence imaging, fluorescence imaging-guided photodynamic anticancer and antimicrobial therapy in recent years, hoping to provide some new ideas for the construction of robust photosensitizers. Finally, the current problems and future challenges of anion-π+ AIEgens are discussed.

Recent advances in super-resolution optical imaging based on aggregation-induced emission

Super-resolution imaging has rapidly emerged as an optical microscopy technique, offering advantages of high optical resolution over the past two decades; achieving improved imaging resolution requires significant efforts in developing super-resolution imaging agents characterized by high brightness, high contrast and high sensitivity to fluorescence switching. Apart from technical requirements in optical systems and algorithms, super-resolution imaging relies on fluorescent dyes with special photophysical or photochemical properties. The concept of aggregation-induced emission (AIE) was proposed in 2001, coinciding with unprecedented advancements and innovations in super-resolution imaging technology. AIE probes offer many advantages, including high brightness in the aggregated state, low background signal, a larger Stokes shift, ultra-high photostability, and excellent biocompatibility, making them highly promising for applications in super-resolution imaging. In this review, we summarize the progress in implementation methods and provide insights into the mechanism of AIE-based super-resolution imaging, including fluorescence switching resulting from photochemically-converted aggregation-induced emission, electrostatically controlled aggregation-induced emission and specific binding-regulated aggregation-induced emission. Particularly, the aggregation-induced emission principle has been proposed to achieve spontaneous fluorescence switching, expanding the selection and application scenarios of super-resolution imaging probes. By combining the aggregation-induced emission principle and specific molecular design, we offer some comprehensive insights to facilitate the applications of AIEgens (AIE-active molecules) in super-resolution imaging.

Microplastics and nanoplastics induced differential respiratory damages in tilapia fish Oreochromis niloticus

With the increasing micro(nano)plastics (MNPs) pollution in aquatic environments, fish respiration is encountering a huge threat. Herein, polystyrene (PS) MNPs with three sizes (80 nm, 2 µm, and 20 µm) were exposed to tilapia Oreochromis niloticus at an environmentally relevant concentration of 100 μg/L for 28 days and their impacts on respiratory function were investigated. Based on the results of oxygen consumption and histological analysis, all the three treatments could induce respiratory damages and such impacts were more severe for the 2 µm and 20 µm treatments than for the 80 nm treatment. These results were explained by the more significant upregulation of egln3 and nadk, and the downregulation of isocitrate. Transcriptomics and metabolomics further revealed that TCA cycle played a key role in respiratory dysfunction induced by micro-sized PS particles, and cytokine and chemokine related functions were simultaneously enriched. Although nano-sized PS particles had the potential to penetrate the respiratory epithelium and reached the internal structure of the O. niloticus gills, they were easily expelled through the blood circulation. Our results highlighted the serious threat of MNPs to fish respiration and provided insights into the differential toxicological mechanisms between micro-sized and nano-sized particles, thus assisting in ecological risk assessments.

Mitochondria-targeted pentacyclic triterpene NIR-AIE derivatives for enhanced chemotherapeutic and chemo-photodynamic combined therapy

Complexes formed by combining pentacyclic triterpenes (PTs) with Aggregation-Induced Emission luminogens (AIEgens), termed pentacyclic triterpene-aggregation induced emission (PT-AIEgen) complexes, merge the chemotherapeutic properties of PTs with the photocytotoxicity of AIEgens. In this study, we synthesized derivatives by connecting three types of triphenylamine (TPA) pyridinium derivatives with three common pentacyclic triterpenes. Altering the connecting group between the electron donor TPA and the electron acceptor pyridinium resulted in increased production of reactive oxygen species (ROS) by PT-AIEgens and a red-shift in their fluorescence emission spectra. Importantly, the fluorescence emission spectra of BA-3, OA-3, and UA-3 extended into the near-infrared (NIR) range, enabling NIR-AIE imaging of the sites where the derivatives aggregated. The incorporation of the pyridinium structure improved the mitochondrial targeting of PT-AIEgens, enhancing mitochondrial pathway-mediated cell apoptosis and improving the efficiency of chemotherapy (CT) and chemo-photodynamic combined therapy (CPCT) both in vivo and in vitro. Cellular fluorescence imaging demonstrated rapid cellular uptake and mitochondrial accumulation of BA-1 (-2, -3). Cell viability experiments revealed that BA-1 (-2), OA-1 (-2), and UA-1 (-2) exhibited superior CT cytotoxicity compared to their parent drugs, with BA-1 showing the most potent inhibitory effect on HeLa cells (IC50 = 1.19 μM). Furthermore, HeLa cells treated with BA-1 (1 μM), BA-2 (1.25 μM), and BA-3 (1 μM) exhibited survival rates of 2.99 % ± 0.05 % μM, 5.92 % ± 2.04 % μM, and 2.53 % ± 0.73 % μM, respectively, under white light irradiation. Mechanistic experiments revealed that derivatives induced cell apoptosis via the mitochondrial apoptosis pathway during both CT and CPCT. Remarkably, BA-1 and BA-3 in CPCT inhibited cancer cell proliferation in an in vivo melanoma mouse xenograft model. These results collectively encourage further research of PT-AIEgens as potential anticancer agents.

Turn-on stimuli-responsive switch: strategies for activating a new fluorescence channel by pressure

The stimulus-responsive smart switching of aggregation-induced emission (AIE) features has attracted considerable attention in 4D information encryption, optical sensors and biological imaging. Nevertheless, for some AIE-inactive triphenylamine (TPA) derivatives, activating the fluorescence channel of TPA remains a challenge based on their intrinsic molecular configuration. Here, we took a new design strategy for opening a new fluorescence channel and enhancing AIE efficiency for (E)-1-(((4-(diphenylamino)phenyl)imino)methyl)naphthalen-2-ol. The turn-on methodology employed is based on pressure induction. Combining ultrafast and Raman spectra with high-pressure in situ showed that activating the new fluorescence channel stemmed from restraining intramolecular twist rotation. Twisted intramolecular charge transfer (TICT) and intramolecular vibration were restricted, which induced an increase in AIE efficiency. This approach provides a new strategy for the development of stimulus-responsive smart-switch materials.

Nanoparticles for super-resolution microscopy: intracellular delivery and molecular targeting

Following an overview of the approaches and techniques used to acheive super-resolution microscopy, this review presents the advantages supplied by nanoparticle based probes for these applications. The various clases of nanoparticles that have been developed toward these goals are then critically described and these discussions are illustrated with a variety of examples from the recent literature.

Three-dimensional imaging and analysis of pathological tissue samples with de novo generation of citrate-based fluorophores

Two-dimensional (2D) histopathology based on the observation of thin tissue slides is the current paradigm in diagnosis and prognosis. However, labeling strategies in conventional histopathology are limited in compatibility with 3D imaging combined with tissue clearing techniques. Here, we present a rapid and efficient volumetric imaging technique of pathological tissues called 3D tissue imaging through de novo formation of fluorophores, or 3DNFC, which is the integration of citrate-based fluorogenic reaction DNFC and tissue clearing techniques. 3DNFC markedly increases the fluorescence intensity of tissues by generating fluorophores on nonfluorescent amino-terminal cysteine and visualizes the 3D structure of the tissues to provide their anatomical morphology and volumetric information. Furthermore, the application of 3DNFC to pathological tissue achieves the 3D reconstruction for the unbiased analysis of diverse features of the disorders in their natural context. We suggest that 3DNFC is a promising volumetric imaging method for the prognosis and diagnosis of pathological tissues.

Fluorescent Nanoparticles for Super-Resolution Imaging

Super-resolution imaging techniques that overcome the diffraction limit of light have gained wide popularity for visualizing cellular structures with nanometric resolution. Following the pace of hardware developments, the availability of new fluorescent probes with superior properties is becoming ever more important. In this context, fluorescent nanoparticles (NPs) have attracted increasing attention as bright and photostable probes that address many shortcomings of traditional fluorescent probes. The use of NPs for super-resolution imaging is a recent development and this provides the focus for the current review. We give an overview of different super-resolution methods and discuss their demands on the properties of fluorescent NPs. We then review in detail the features, strengths, and weaknesses of each NP class to support these applications and provide examples from their utilization in various biological systems. Moreover, we provide an outlook on the future of the field and opportunities in material science for the development of probes for multiplexed subcellular imaging with nanometric resolution.

A potent luminogen with NIR-IIb excitable AIE features for ultradeep brain vascular and hemodynamic three-photon imaging

Three-photon excited fluorescence microscopy (3PEFM) has emerged as a promising protocol for visualizing deep-brain vasculature and hemodynamics. However, the current situation is still far from satisfactory, due to small excitation action cross-section and short excitation wavelength of those previously reported 3PEFM luminogens. Herein, we manipulated molecular engineering by subtly regulating structural planarization/twisting to achieve ingenious integration of large three-photon absorption cross-section, high fluorescence quantum yield, ultralong near-infrared IIb excitation, and aggregation-induced emission features. The resulting molecule, namely DPCZ-BT, exhibited as high as 50.6% of fluorescence quantum yield and as large as 2.0 × 10-81 cm6s2/photon2 of three-photon absorption cross-section, which can be excited by 1665 nm fs laser and presents a recorded penetration depth of 1860 μm for deep-brain vascular structural imaging with high spatiotemporal resolution and signal-to-background ratio. Moreover, DPCZ-BT having good photostability and excellent biocompatibility is capable of impressively approaching 1600 μm depth in monitoring red blood cells flow velocity with extraordinary clarity for hemodynamics.

A synergistic strategy to develop photostable and bright dyes with long Stokes shift for nanoscopy

The quality and application of super-resolution fluorescence imaging greatly lie in the dyes’ properties, including photostability, brightness, and Stokes shift. Here we report a synergistic strategy to simultaneously improve such properties of regular fluorophores. Introduction of quinoxaline motif with fine-tuned electron density to conventional rhodamines generates new dyes with vibration structure and inhibited twisted-intramolecular-charge-transfer (TICT) formation synchronously, thus increasing the brightness and photostability while enlarging Stokes shift. The new fluorophore YL578 exhibits around twofold greater brightness and Stokes shift than its parental fluorophore, Rhodamine B. Importantly, in Stimulated Emission Depletion (STED) microscopy, YL578 derived probe possesses a superior photostability and thus renders threefold more frames than carbopyronine based probes (CPY-Halo and 580CP-Halo), known as photostable fluorophores for STED imaging. Furthermore, the strategy is well generalized to offer a new class of bright and photostable fluorescent probes with long Stokes shift (up to 136 nm) for bioimaging and biosensing.

Super-resolution microscopy is a powerful tool for cellular studies but requires bright and stable fluorescent probes. Here, the authors report on a strategy to introduce quinoxaline motifs to conventional probes to make them brighter, more photostable, larger Stokes shift, and demonstrate the probes for biosensing applications.

Deep-Brain Three-Photon Imaging Enabled by Aggregation-Induced Emission Luminogens with Near-Infrared-III Excitation

Understanding the morphology and hemodynamics of cerebral vasculature at large penetration depths and microscale resolution is fundamentally important to decipher brain diseases. Among the various imaging technologies, three-photon (3P) microscopy is of significance by virtue of its deep-penetrating capability and submicron resolution, which especially benefits in vivo vascular imaging. Aggregation-induced emission luminogens (AIEgens) have been recognized to be extraordinarily powerful as 3P probes. However, systematic studies on the structure-performance relationship of 3P AIEgens have been seldom reported. Herein, a series of AIEgens has been designed and synthesized. By intentionally introducing benzene rings onto electron donors (D) and acceptors (A), the molecular distortion, conjugation strength, and the D-A relationship can be facilely manipulated. Upon encapsulation with DSPE-PEG₂₀₀₀, the optimized AIEgens are successfully applied for 3P microscopy with emission in the far-red/near-infrared-I (NIR-I, 700-950 nm) region under the near-infrared-III (NIR-III, 1600-1870 nm) excitation. Impressively, using mice with an opened skull, vasculature within 1700 μm and a microvessel with a diameter of 2.2 μm in deep mouse brain were clearly visualized. In addition, the hemodynamics of blood vessels were well-characterized. Thus, this work not only proposes a molecular design strategy of 3P AIEgens but also promotes the performance of 3P imaging in cerebral vasculature.

Bleaching-Resistant Super-Resolution Fluorescence Microscopy

Photobleaching is the permanent loss of fluorescence after extended exposure to light and is a major limiting factor in super-resolution microscopy (SRM) that restricts spatiotemporal resolution and observation time. Strategies for preventing or overcoming photobleaching in SRM are reviewed developing new probes and chemical environments. Photostabilization strategies are introduced first, which are borrowed from conventional fluorescence microscopy, that are employed in SRM. SRM-specific strategies are then highlighted that exploit the on-off transitions of fluorescence, which is the key mechanism for achieving super-resolution, which are becoming new routes to address photobleaching in SRM. Off states can serve as a shelter from excitation by light or an exit to release a damaged probe and replace it with a fresh one. Such efforts in overcoming the photobleaching limits are anticipated to enhance resolution to molecular scales and to extend the observation time to physiological lifespans.

Facilely prepared aggregation-induced emission (AIE) nanocrystals with deep-red emission for super-resolution imaging

Organic nanocrystals (NCs) with high brightness are highly desirable for biological imaging. However, the preparation of NCs by a facile and fast method is still challenging. Herein, an aggregation-induced emission (AIE) luminogen of 4,4'-(5,6-difluorobenzo[c][1,2,5]thiadiazole-4,7-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (DTPA-BT-F) in the deep-red region is designed with intensive crystalline features to obtain NCs by kinetically controlled nanoprecipitation. The prepared AIE NCs with high brightness and good photo-stability are then applied in super-resolution imaging via stimulated emission depletion (STED) nanoscopy. As observed, the nanostructures in lysosomes of both fixed and live cells are well visualized with superior lateral resolutions under STED nanoscopy (full width at half maximum values, 107 and 108 nm) in contrast to that in confocal imaging (548 and 740 nm). More importantly, dynamic monitoring and long-term tracking of lysosomal movements in live HeLa cells, such as lysosomal contact, can also be carried out by using DTPA-BT-F NCs at a superior resolution. To the best of our knowledge, this is the first case of AIE NCs prepared by nanoprecipitation for STED nanoscopy, thus providing a new strategy to develop high performance imaging agents for super-resolution imaging.

Machine-Learning-Assisted Accurate Prediction of Molecular Optical Properties upon Aggregation

For practical applications, molecules often exist in an aggregate state. Therefore, it is of great value if one can predict the performance of molecules when forming aggregates, for example, aggregation-induced emission (AIE) or aggregation-caused quenching (ACQ). Herein, a database containing AIE/ACQ molecules reported in the literature is first established. Through training, these machine learning (ML) models can build up the structure-property relationship and thus implement fast prediction of AIE/ACQ properties. To this end, a multi-modal approach is proposed, multiple prediction methods are compared and designed, and thus an ensemble strategy is developed. First, multiple molecular descriptors are considered at the same time, major features are extracted by dimensionality reduction, and multi-modal features are synthesized. Then, several state-of-the-art methods are designed and compared to analyze the advantages of the different methods. Finally, the ensemble strategy combines the advantages of the multiple methods to obtain the final prediction result. The reliability of this approach in an unknown molecular space is further verified by three newly designed molecules. Reasonable consistency between model predictions and experimental outcomes is obtained. The result indicates that ML can be a powerful tool to predict molecular properties in the aggregated state, thus accelerating the development of solid-state optical materials.

Recent Advances in Aggregation-Induced Emission Active Materials for Sensing of Biologically Important Molecules and Drug Delivery System

The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.

Fluorescent Probes for STED Optical Nanoscopy

Progress in developing fluorescent probes, such as fluorescent proteins, organic dyes, and fluorescent nanoparticles, is inseparable from the advancement in optical fluorescence microscopy. Super-resolution microscopy, or optical nanoscopy, overcame the far-field optical resolution limit, known as Abbe's diffraction limit, by taking advantage of the photophysical properties of fluorescent probes. Therefore, fluorescent probes for super-resolution microscopy should meet the new requirements in the probes' photophysical and photochemical properties. STED optical nanoscopy achieves super-resolution by depleting excited fluorophores at the periphery of an excitation laser beam using a depletion beam with a hollow core. An ideal fluorescent probe for STED nanoscopy must meet specific photophysical and photochemical properties, including high photostability, depletability at the depletion wavelength, low adverse excitability, and biocompatibility. This review introduces the requirements of fluorescent probes for STED nanoscopy and discusses the recent progress in the development of fluorescent probes, such as fluorescent proteins, organic dyes, and fluorescent nanoparticles, for the STED nanoscopy. The strengths and the limitations of the fluorescent probes are analyzed in detail.

AIE materials for cancer cell detection, bioimaging and theranostics

AIE materials exhibit weakly emissive or non-emissive properties in dilute solutions while emit powerful fluorescence in the aggregated/solid state. Recently, AIE based materials have gained immense attention due to their multifunctional role in cancer cell detection, bioimaging and cancer theranostics. In this present book chapter, we will highlight recent advancements of AIE materials for different cancer theranostics applications.

STED Nanoscopy Imaging of Cellular Lipid Droplets Employing a Superior Organic Fluorescent Probe

Lipid droplets (LDs) are spherical organelles that participate in numerous biological processes. In order to visualize LDs on the nanoscale, nanoscopy fluorescence imaging is considered as the most attractive technique but is substantially limited by the characteristics of fluorescent probes. Thus, the development of a superior fluorescent probe that is capable of nanoscopy fluorescence imaging has attracted enormous attention. Herein, a benzodithiophene-tetraoxide-based molecule Lipi-BDTO has been developed that can easily undergo the stimulated emission depletion (STED) process and displays high photostability. These two characteristics of fluorescent probes finely satisfy the requirements of STED nanoscopy imaging. Indeed, applying the probe for STED imaging achieves a high resolution of 65 nm, belonging to one of the leading results of LDs fluorescence imaging. Furthermore, the high photostability of this fluorescent probe enables it to monitor the dynamics of LDs by time-lapse STED imaging as well as to visualize the three-dimensional (3D) spatial distribution of LDs by 3D STED imaging. Notably, the resolution of the 3D STED image represents one of the best LDs fluorescence imaging results so far. Besides STED nanoscopy imaging, the superior utility of this fluorescent probe has been also demonstrated in two-color 3D confocal imaging and four-color confocal imaging.

Anti-cancer adjuvant drug screening via epithelial-mesenchymal transition-related aptamer probe

Epithelial-mesenchymal transition (EMT) is implicated in the pathological processes of cancer metastasis and drug resistance. Anti-cancer drugs may also potentially lead to EMT, resulting in their reduced therapeutic effect. Therefore, the combination of these anti-cancer drugs with anti-EMT agents has been promoted in clinic. Screening anti-EMT drugs and evaluation of EMT process are highly dependent on EMT biomarkers on cell membrane. At present, the detection of EMT biomarker is mainly by Western blot method, which is time-consuming and complicated. In this work, for effectively screening anti-EMT drugs by evaluation of the EMT process, a type of aptamer probe based on aggregation-induced emission (AIE) was designed. The aptamer SYL3C was employed to target the EMT biomarker EpCAM on cell membrane. Two fluorophores, FAM and tetraphenylethene (TPE, an AIE dye), were modified at the two ends of SYL3C, respectively. This aptamer probe (TPE-SYL3C-FAM) can monitor the EpCAM expression, which can be recovered by anti-EMT drugs. By observation of the change in TPE emission intensity, the anti-EMT effect of drugs can be evaluated. The FAM emission was used as internal reference to reduce environmental interferences. This probe can be potentially used to screen anti-EMT agents as anti-cancer adjuvant drugs with high throughput.

Advanced Static and Dynamic Fluorescence Microscopy Techniques to Investigate Drug Delivery Systems

In the past decade(s), fluorescence microscopy and laser scanning confocal microscopy (LSCM) have been widely employed to investigate biological and biomimetic systems for pharmaceutical applications, to determine the localization of drugs in tissues or entire organisms or the extent of their cellular uptake (in vitro). However, the diffraction limit of light, which limits the resolution to hundreds of nanometers, has for long time restricted the extent and quality of information and insight achievable through these techniques. The advent of super-resolution microscopic techniques, recognized with the 2014 Nobel prize in Chemistry, revolutionized the field thanks to the possibility to achieve nanometric resolution, i.e., the typical scale length of chemical and biological phenomena. Since then, fluorescence microscopy-related techniques have acquired renewed interest for the scientific community, both from the perspective of instrument/techniques development and from the perspective of the advanced scientific applications. In this contribution we will review the application of these techniques to the field of drug delivery, discussing how the latest advancements of static and dynamic methodologies have tremendously expanded the experimental opportunities for the characterization of drug delivery systems and for the understanding of their behaviour in biologically relevant environments.

Development of mesoporous silica-based nanoprobes for optical bioimaging applications

A mesoporous silica nanoparticle (MSN)-based nanoplatform has attracted growing attention in the biomedical field due to the unique characteristics of MSNs including a high surface area, tunable pore sizes, colloidal stability, ease of functionalization, and desirable biocompatibility. Typically, MSNs are designed as nanocarriers for the incorporation of a variety of contrast agents for bioimaging, which can address the intrinsic drawbacks of contrast agents, including poor solubility in water, rapid photobleaching, and low stability. This review summarizes the recent advances in the field of MSN-based nanoprobes for fluorescence imaging and photoacoustic (PA) imaging applications. The approaches for the incorporation of contrast agents into MSN-based nanoplatforms including encapsulating contrast agents within MSNs, covalently conjugating contrast agents on the surface or pores of MSNs, physically absorbing contrast agents in the pores of MSNs, and doping contrast agents in the framework of MSNs are introduced. MSN-based nanoprobes for fluorescence imaging and PA imaging are discussed. The enhanced fluorescence imaging and PA imaging performances of MSN-based nanoprobes relative to the bare contrast agents are introduced and the underlying mechanisms are discussed in detail. Finally, current challenges and perspectives of MSN-based nanoprobes in the bioimaging field are discussed.

Hydrophilic AIE-Active Tetraarylethenes for Fluorescence Sensing and Super-Resolution Imaging of Amyloid Fibrils from Hen Egg White Lysozyme

Hen egg white lysozyme (HEWL) is frequently applied as a model protein for research on protein folding, unfolding, and fibrillization identified by featured fluorescent probes. Here, a series of hydrophilic, pH-sensitive tetraarylethene (TAE)-type AIEgens are synthesized via a geminal cross-coupling (GCC) reaction and evaluated for their capabilities of fluorescence sensing and super-resolution localization imaging of HEWL fibrils. With superior optical and sensing properties, the selected TAE-type AIEgen probe is weakly emissive in aqueous media, without dependence on the pH value and buffer concentration, but exhibits "turn-on" fluorescence upon interaction with HEWL amyloid fibrils in a spontaneous and reversible way that just meets the requirement of fluorescence random switching for super-resolution imaging. The selected probe has the strongest fluorescence response to HEWL amyloid fibrils exhibiting a limit of detection of 0.59 nmol/L and enables super-resolution fluorescence imaging of amyloid aggregates with a high resolution of 40 nm.

Organic Nanoparticles-Assisted Low-Power STED Nanoscopy

Stimulated emission depletion (STED) nanoscopy plays a key role in achieving sub-50 nm high spatial resolution for subcellular live-cell imaging. To avoid re-excitation, the STED wavelength has to be tuned at the red tail of the emission spectrum of fluorescent probes, leading to high depletion laser power that might damage the cell viability and functionality. Herein, with the highly emissive silica-coated core-shell organic nanoparticles (CSONPs) enabling a giant Stokes shift of 150 nm, ultralow power STED is achieved by shifting the STED wavelength to the emission maximum at 660 nm. The stimulated emission cross section is increased by ∼20-fold compared to that at the emission red tail. The measured saturation intensity and lateral resolution of our CSONP are 0.0085 MW cm^-2 and 25 nm, respectively. More importantly, long-term (>3 min) dynamic super-resolution imaging of the lysosomal fusion-fission processes in living cells is performed with a resolution of 37 nm.

Orthogonal Reconstruction of Upconversion and Holographic Images for Anticounterfeiting Based on Energy Transfer

Crosstalk-free reconstruction of multiple images within a single element can greatly boost the image capacity and information security. We herein demonstrate a viable approach by integrating upconversion and holographic images into a single holographic polymer nanocomposite. The holographic image is reconstructed through photopolymerization-induced phase separation under a 460 nm laser and identifiable under room light, while the upconversion image recognizable under a 980 nm laser is photopatterned via spatially photobleaching of the dye embedded in the upconversion nanoparticle (UCNP) shell under 365 nm light. To this end, the lanthanide-doped UCNP in the core/shell/shell nanostructure of NaYF₄:20%Yb³⁺,0.5%Tm³⁺@NaYF₄@SiO₂ is designed, and the dye, fluorescein isothiocyanate (FITC), is fixed in the outermost SiO₂ shell via the amine-isothiocyanate reaction and the subsequent sol-gel reaction. Energy transfer from the core of the UCNP to FITC embedded in the shell is critical to boosting the contrast of the upconversion image, which dials the emission color from blue to yellow-green. It is also found that the upconversion image can be brightened by increasing the UCNP content while the holographic image is weakened when the UCNP content is over 15 wt %. This study paves a new way toward advanced anticounterfeiting.

Shedding New Lights Into STED Microscopy: Emerging Nanoprobes for Imaging

First reported in 1994, stimulated emission depletion (STED) microscopy has long been regarded as a powerful tool for real-time superresolved bioimaging . However, high STED light power (101∼3 MW/cm2) is often required to achieve significant resolution improvement, which inevitably introduces phototoxicity and severe photobleaching, damaging the imaging quality, especially for long-term cases. Recently, the employment of nanoprobes (quantum dots, upconversion nanoparticles, carbon dots, polymer dots, AIE dots, etc.) in STED imaging has brought opportunities to overcoming such long-existing issues. These nanomaterials designed for STED imaging show not only lower STED power requirements but also more efficient photoluminescence (PL) and enhanced photostability than organic molecular probes. Herein, we review the recent progress in the development of nanoprobes for STED imaging, to highlight their potential in improving the long-term imaging quality of STED microscopy and broadening its application scope. We also discuss the pros and cons for specific classes of nanoprobes for STED bioimaging in detail to provide practical references for biological researchers seeking suitable imaging kits, promoting the development of relative research field.

Recent advances in MoS2-based photothermal therapy for cancer and infectious disease treatment

Photothermal therapy (PTT) is a treatment combining laser irradiation and a photothermal transduction agent (PTA) to generate hyperthermia, which is used to efficiently and effectively treat cancer and prevent bacteria-induced infectious diseases. MoS2, an increasingly used two-dimensional transition metal dichalcogenide, which shows high absorbance in the near infrared (NIR) laser region, has been extensively utilized as a novel PTA in biomedical applications. The use of MoS2 as an advanced photoabsorbing agent has introduced a more efficient cancer therapy and improved antibacterial efficacy. In this review, we firstly summarize the recent advances in the MoS2-based platform for PTT in cancer and bacteria-induced infectious diseases treatments. We then discuss that the combination of MoS2-based PTT and other biomedical methods along with multimodality imaging, such as chemotherapy, photodynamic therapy (PDT) and immunotherapy, might be a promising strategy for cancer treatment. Furthermore, a new concept is proposed wherein MoS2-based PTT and combined therapies based on this could be more effective for the treatment of various bacteria-induced infectious diseases. Finally, research progress, challenges, and perspectives for the future development of this MoS2-based platform in cancer and bacteria-induced infectious disease treatments are discussed and concluded. Collectively, we think that MoS2-based PTT with high therapeutic efficacy and minimal side-effects could be potentially applied in clinical settings to improve cancer and infectious disease treatments.

Quantum Dots for Improved Single-Molecule Localization Microscopy

Colloidal semiconductor quantum dots (QDs) have long established their versatility and utility for the visualization of biological interactions. On the single-particle level, QDs have demonstrated superior photophysical properties compared to organic dye molecules or fluorescent proteins, but it remains an open question as to which of these fundamental characteristics are most significant with respect to the performance of QDs for imaging beyond the diffraction limit. Here, we demonstrate significant enhancement in achievable localization precision in QD-labeled neurons compared to neurons labeled with an organic fluorophore. Additionally, we identify key photophysical parameters of QDs responsible for this enhancement and compare these parameters to reported values for commonly used fluorophores for super-resolution imaging.

Aggregation-Induced Emission Molecule Microwire-Based Specific Organic Vapor Detector through Structural Modification

An optical organic vapor sensor array based on colorimetric or fluorescence changes quantified by spectroscopy provides an efficient method for realizing rapid identification and detection of organic vapor, but improving the sensitivity of the optical organic vapor sensor is challenging. Here, AIE/polymer (AIE, ggregation-induced emission) composites into microwires arrays are fabricated as organic vapor sensors with specific recognition and high sensitivity for different vapors using the capillary-bridge-mediated assembly method. Such organic vapor sensor successfully detects organic vapor relying on a swelling-induced fluorescence change of the AIE/polymer composites, combating the unique property of AIE molecules and vapor absorption-induced polymer swelling. A series of AIE/polymer composites into microwires arrays with four different groups on the AIE molecule and four different side chains on the polymer is fabricated to detect four different organic vapors. The mechanism for improved sensitivity of the AIE/polymer composites microwires arrays sensors is the same because of the similar polarity between the group of AIE molecules and the vapor molecules. Molecular design of the side chains of the polymer and the groups of AIE molecules based on the polarity of the targeted vapor molecule can enhance the sensitivity of the sensors to the subparts per million level.

Long-Range Exciton Migration in Coassemblies: Achieving High Photostability without Disrupting the Electron Donation of Fluorene Oligomers

In this work, photostable coassemblies from a nonphotostable fluorene oligomer (the energy donor) and a photostable oligomer (the energy acceptor) are fabricated. Long-range exciton migration over a net distance of about 370 energy-donor molecules to energy acceptors is demonstrated in such coassemblies. The fast and long energy migration allows harvesting of the excitation energy of energy donors by embedding a small number of energy acceptors for photostability enhancement. Importantly, embedding a small number of energy acceptors in coassemblies causes a negligible negative influence on the electron donation of energy donors that are desired in practical applications. The advantages of the coassemblies fabricated, that is, high photostability without disrupting the electron donation of energy donors, are well illustrated in fluorescence detection of trace explosives where prolonged working life and improved detection capacity are achieved.

Recent advances in luminescent materials for super-resolution imaging via stimulated emission depletion nanoscopy

Recent progress on STED fluorophores for super-resolution imaging and also their characteristics are outlined here, thus providing some guidelines to select proper probes and even develop new materials for super-resolution imaging via STED nanoscopy.

Fc-specific and covalent conjugation of a fluorescent protein to a native antibody through a photoconjugation strategy for fabrication of a novel photostable fluorescent antibody

Fluorophore-antibody conjugates with high photobleaching resistance, high chemical stability, and Fc-specific attachment is a great advantage for immunofluorescence imaging. Here, an Fc-binding protein (Z-domain) carrying a photo-cross-linker (p-benzoylphenylalanine, Bpa) fused with enhanced green fluorescent protein (EGFP), namely photoactivatable Z_Bpa-EGFP recombinant, was directly generated using the aminoacyl-tRNA synthetase/suppressor tRNA technique without any further modification. By employing the photoactivatable Z_Bpa-EGFP, an optimal approach was successfully developed which enabled EGFP to site-selectively and covalently attach to native antibody (IgG) with approximately 90% conjugation efficiency. After characterizing the Fc-specific and covalent manner of the EGFP-photoconjugated antibody, its excellent photobleaching resistance for immunofluorescence imaging was demonstrated in a model study by monitoring the toll-like receptor 4 (TLR4) expression in HepG2 cells. The proposed approach here for the preparation of a novel fluorescent antibody is available and reliable, which would play an important role in fluorescence immunoassay, and is expected to be extended to the generation of other biomolecule-photoconjugated antibodies, such as other fluorescent proteins for multiplex immunofluorescence imaging or reporter enzymes for highly sensitive enzyme immunoassays.Graphical abstract.

Small Molecular Prodrug Amphiphile Self-Assembled AIE Dots for Cancer Theranostics

A simple and facile one-step method was developed to construct a small molecular prodrug amphiphile self-assembled organic dots CPPG with aggregation-induced emission (AIE) characteristics. Diphenylalanine peptide (FF), which is the essential moiety of the self-assembling peptide-drug conjugate and as its core recognition motifs for molecular self-assembly. In addition, the D-glucose transported protein (GLUT), which is one of the important nutrient transporters and is overexpressed in cancer cells. The conjugation of glycosyl further endues the nanoparticle with good biocompatibility and tumor-targeting ability. Taking advantages of both the cancer cell-targeting capability of small molecular prodrug amphiphile CPPG and the AIE aggregates with strong emission, the prepared CPPG AIE dots can target cancer cells specifically and inhibit the proliferation of cancer cells with good biocompatibility and photostability. Based on the general approach, types of universal organic fluorescent nanoprobes could be facilely constructed for imaging applications and biological therapeutics, which possess the properties of specific recognition and high brightness.

Aggregation-induced Emission Based Fluorogens for Mitochondria-targeted Tumor Imaging and Theranostics

Occurrence and development of cancer are multifactorial and multistep processes which involve complicated cellular signaling pathways. Mitochondria, as the energy producer in cells, play key roles in tumor cell growth and division. Since mitochondria of tumor cells have a more negative membrane potential than those of normal cells, several fluorescent imaging probes have been developed for mitochondria-targeted imaging and photodynamic therapy. Conventional fluorescent dyes suffer from aggregation-caused quenching effect, while novel aggregation-induced emission (AIE) probes are ideal candidates for biomedical applications due to their large stokes shift, strong photo-bleaching resistance, and high quantum yield. This review aims to introduce the recent advances in the design and application of mitochondria-targeted AIE probes. The comprehensive review focuses on the structure-property relationship of these imaging probes, expecting to inspire the development of more practical and versatile AIE fluorogens (AIEgens) as tumor imaging and therapy agents for preclinical and clinical use.

Controlling Charge Transfer from Quantum Dots to Polyelectrolyte Layers Extends Prospective Applications of Magneto-Optical Microcapsules

The layer-by-layer (LbL) deposition approach allows combined incorporation of fluorescent, magnetic, and plasmonic nanoparticles into the shell of polyelectrolyte microcapsules to obtain stimulus-responsive systems whose imaging and drug release functions can be triggered by external stimuli. The combined use of fluorescent quantum dots (QDs) and magnetic nanoparticles (MNPs) yields magnetic-field-driven imaging tools that can be tracked and imaged even deep in tissue when the appropriate type of QDs and wavelength of their excitation are used. QDs are excellent photonic labels for microcapsule encoding due to their close-to-unity photoluminescence (PL) quantum yields, narrow PL emission bands, and tremendous one- and two-photon extinction coefficients. However, the presence of MNPs and electrically charged polyelectrolyte molecules used for the LbL fabrication of magneto-optical microcapsules provokes alterations of the QD optical properties because of the photoinduced charge and energy transfer resulting in QD photodarkening or photobrightening. These lead to variation of the microcapsule PL signal under illumination, which hampers their tracking and quantitative analysis in cells and tissues. Here, we have studied the effects of the structure and spatial arrangement of the nanoparticles within the microcapsule polyelectrolyte shell, the total shell thickness, and the shell surface charge on their PL properties under continuous illumination. The roles of the charge transfer and its main driving forces in the stability of the microcapsules PL signal have been established, and the design of the microcapsules dually encoded with QDs and MNPs providing the strongest and most stable PL has been determined. Controlling the energy transfer from the QDs and MNPs and the charge transfer from QDs to polyelectrolyte layers in the engineering of magneto-optical microcapsules with a bright and stable PL signal extends their applications to long-lasting quantitative fluorescence imaging.

Tuning molecular aggregation to achieve highly bright AIE dots for NIR-II fluorescence imaging and NIR-I photoacoustic imaging

Currently, bright aggregation-induced emission luminogens (AIEgens) with high photoluminescence quantum yields (PLQYs) in the NIR-II region are still limited, and thus an efficient strategy to enhance NIR-II fluorescence performance through tuning molecular aggregation is proposed here. The synthesized donor-acceptor tailored AIEgen (DTPA-TBZ) not only exhibits an excellent absorptivity in the NIR-I region, but also good fluorescence signals in the NIR-II region with an emission extending to 1200 nm. Benefiting from such improved intramolecular restriction and aggregation, a significant absolute PLQY value of 8.98% was obtained in solid DTPA-TBZ. Encouragingly, the resulting AIE dots also exhibit a high relative PLQY of up to 11.1% with IR 26 as the reference (PLQY = 0.5%). Finally, the AIE dots were applied in high performance NIR-II fluorescence imaging and NIR-I photoacoustic (PA) imaging: visualization of abdominal vessels, hind limb vasculature, and cerebral vessels with high signal to background ratios was performed via NIR-II imaging; Moreover, PA imaging has also been performed to clearly observe tumors in vivo. These results demonstrate that by finely tuning molecular aggregation in DTPA-TBZ, a good NIR-I absorptivity and a highly emissive fluorescence in the NIR-II region can be achieved simultaneously, finally resulting in a promising dual-modal imaging platform for real-world applications to achieve precise cancer diagnostics.

Multiplexed SERS Barcodes for Anti-Counterfeiting

Forged signature threatens the authenticity of personal identity. Here, an effective SERS anti-counterfeiting system is designed for personal signatures. Mixed ligands improve the complexity of Raman spectra and expand the coding capacity. Fourteen distinct combinations are created from mere five ligands, and great expansion is possible with modest expansion of the ligand library. On the other hand, the (Au-aggregate)@Ag@PSPAA nanostructure significantly increases the surface-enhanced Raman scattering (SERS) intensity and stability so that excellent performance is achieved in SERS detection. By integrating these strategies, SERS inks are produced and applied in signature anti-counterfeiting. The resulting spectra are converted to barcodes that are readily detected through a smart phone APP. With these improvements, this work brings SERS one step closer toward practical applications in signature anti-counterfeiting.

Deep-Red Fluorescent Organic Nanoparticles with High Brightness and Photostability for Super-Resolution in Vitro and in Vivo Imaging Using STED Nanoscopy

To achieve super-resolution imaging in biological research using stimulated emission depletion (STED) nanoscopy, organic luminescent materials and their corresponding fluorescent nanoparticles with high brightness and photostability are of great significance. Herein, donor-acceptor-typed DBTBT-4C8 bearing flexible alkyl chains was developed, not only to afford deep-red emission from 600 to 800 nm but also to obtain high fluorescent brightness with the absolute photoluminescence quantum yields of 25%. After that, well-defined and monodispersed spherical nanoparticles using DBTBT-4C8 with bright emission, excellent biocompatibility, and photostability, which can easily mix with amphipathic block polymers, were then produced for super-resolution in vitro and in vivo imaging using STED nanoscopy. The observations showed that in contrast to confocal microscopy with a full width at half-maximum (FWHM) value of ≈400 nm, superior resolution with a significantly improved FWHM value of only 100 nm was achieved in biomedical cell imaging, which was also used to reconstruct three-dimensional images of stained HeLa cells at an ultrahigh resolution. More importantly, by using the prepared fluorescent organic nanoparticles (FONPs) in STED nanoscopy, in vivo imaging in glass catfish with largely enhanced resolution was also successfully achieved, demonstrating that these developed deep-red FONPs here are highly suitable for super-resolution in vitro and in vivo imaging using STED nanoscopy.