A Eutectic Mixture of Natural Fatty Acids Can Serve as the Gating Material for Near-Infrared-Triggered Drug Release

Optimizing anthocyanin Oral delivery: Effects of food biomacromolecule types on Nanocarrier performance for enhanced bioavailability

Wall material types influence the efficacy of nanocarriers in oral delivery systems. We utilized three food biomacromolecules (whey protein isolate, oxidized starch, lipids) to prepare three types of nanocarriers. Our aim was to investigate their performance in digestion, cellular absorption, mucus penetration, intestinal retention, and bioavailability of the encapsulated anthocyanins (Ant). The release rate of protein nanocarriers (Pro-NCs) was twice that of starch nanocarriers (Sta-NCs) and four times that of lipid nanocarriers (Lip-NCs) in simulated gastrointestinal fluid. Additionally, Pro-NCs demonstrated superior transmembrane transport capacity and over three times cellular internalization efficiency than Sta-NCs and Lip-NCs. Sta-NCs exhibited the highest mucus-penetrating capacity, while Pro-NCs displayed the strongest mucoadhesion, resulting in extended gastrointestinal retention time for Pro-NCs. Sta-NCs significantly enhanced the in vivo bioavailability of Ant, nearly twice that of free Ant. Our results demonstrate the critical role of wall material types in optimizing nanocarriers for the specific delivery of bioactive compounds.

Prussian Blue-Assisted NIR Triggered In-Situ Polymerized Nanocomposite Hydrogel for Wound Repair

Hydrogels are commonly used as wound dressings to help maintain a moist environment around the wound and isolate contaminants, thus promoting healing. For irregular wounds, the slow healing process and even infection may occur due to the inability of dressings to adhere well to the wound. Prussian blue (PB) is a metal-organic framework (MOF) material with excellent photothermal conversion and superior stability. In this paper, a kind of near-infrared (NIR) light triggered in-situ polymerized antimicrobial hydrogel was prepared. The free radical initiator was encapsulated in the hollow PB by a phase change material (PCM) to maintain stability. The raised temperature triggered by NIR induced the release and decomposition of the initiator. The matrix was formed by the cross-linking of double bonds on modified chitosan. The quaternary amine groups of modified chitosan and the photothermal properties of PB enhanced the antimicrobial properties of the hydrogel. High-quality wound healing was demonstrated in the whole skin defect model. This study provides a new reference for the preparation of in-situ polymerized hydrogel dressings for irregular wounds.

Near-infrared-responsive Prussian blue nanocages loaded with 5-fluorouracil for combined chemotherapy and photothermal therapy in tumor treatment

Nanodrug delivery systems (NDDS) have been proposed to improve the targeting and bioavailability of chemotherapy drugs. The approach of drug loading via physical adsorption is facile to operate; however, there exists a risk of premature leakage. Coupling the drug molecules with the carrier through chemical reactions can guarantee the stability of the drug delivery process, yet the preparation procedure is relatively intricate. In this research, a kind of Prussian blue nanocage (PB Cage) was fabricated, and the phase change material, 1-pentadecanol, was used as the gating material to solidify 5-fluorouracil (5-FU) inside the nanocage. Upon irradiation with near-infrared (NIR) light, the temperature of the PB Cage can rise rapidly. When the temperature exceeds 43 °C, 1-pentadecanol undergoes a solid-liquid phase transition and subsequently releases 5-FU to inhibit DNA synthesis. Meanwhile, the photothermal therapy (PTT) mediated by the PB Cage is also capable of ablating tumor cells. The NDDS constructed based on PB has achieved the precise release of 5-FU triggered by NIR light, which may avoid side effects on normal tissues. Moreover, the combination of chemotherapy and photothermal therapy can efficaciously suppress the proliferation of tumor cells.

Ultrasensitive Ratiometric Fluorescent Nanothermometer with Reverse Signal Changes for Intracellular Temperature Mapping

Sensing temperature at the subcellular level is pivotal for gaining essential thermal insights into diverse biological processes. However, achieving sensitive and accurate sensing of the intracellular temperature remains a challenge. Herein, we develop a ratiometric organic fluorescent nanothermometer with reverse signal changes for the ultrasensitive mapping of intracellular temperature. The nanothermometer is fabricated from a binary mixture of saturated fatty acids with a noneutectic composition, a red-emissive aggregation-caused quenching luminogen, and a green-emissive aggregation-induced emission luminogen using a modified nanoprecipitation method. Different from the eutectic mixture with a single phase-transition point, the noneutectic mixture possesses two solid-liquid phase transitions, which not only allows for reversible regulation of the aggregation states of the encapsulated luminogens but also effectively broadens the temperature sensing range (25-48 °C) across the physiological temperature range. Remarkably, the nanothermometer exhibits reverse and sensitive signal changes, demonstrating maximum relative thermal sensitivities of up to 63.66% °C-1 in aqueous systems and 44.01% °C-1 in the intracellular environment, respectively. Taking advantage of these outstanding thermometric performances, the nanothermometer is further employed to intracellularly monitor minute temperature variations upon chemical stimulation. This study provides a powerful tool for the exploration of dynamic cellular thermal activities, holding great promise in unveiling intricate physiological processes.

Design of Thermosensitive Niosomes by Eutectic Mixture of Natural Fatty Acids

In the current study, a smart release system responsive to temperature was developed to improve the efficiency of tetracycline (TC) in antibacterial therapy. The nanovesicles designed consist of a non-ionic surfactant, SPAN60, cholesterol and a phase change material (PCM) as a thermoresponsive gating material. Niosomes were prepared using an increasing amount of PCM and characterized in terms of size, zeta potential, colloidal stability and thermoresponsive properties. The vesicles that developed were homogenous in size, had good biocompatibility and stability for up to 3 months and demonstrated thermoresponsive behavior. A low drug leakage was observed at 37 °C, while a rapid release occurred at 42 °C, due to the faster diffusion rate of the drug trough the melted PCM. This controllable drug release capacity allows us to avoid premature drug release, minimizing unwanted and toxic effects and ensuring a long retention time in the nanodevice so that it reaches the infected sites. In addition, TC-loaded niosomes were screened to investigate their antibacterial activity against various Gram-positive and Gram-negative bacteria by minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) assays. An interesting temperature-dependent antibacterial activity was observed against some bacterial strains: the niosomes activity against S. epidermis, for example, was improved by the temperature increase, as suggested by a reduction in MIC values from 112.81 to 14.10 μM observed at 37 and 42 °C, respectively. Taken together, the thermoresponsive platform developed allows us to use lower antibiotic amounts while ensuring therapeutic efficacy and, so, will advance the development of a novel antibacterial agent in clinical practice.

Unrestricted molecular motions enable mild photothermy for recurrence-resistant FLASH antitumor radiotherapy

Ultrahigh dose-rate (FLASH) radiotherapy is an emerging technology with excellent therapeutic effects and low biological toxicity. However, tumor recurrence largely impede the effectiveness of FLASH therapy. Overcoming tumor recurrence is crucial for practical FLASH applications. Here, we prepared an agarose-based thermosensitive hydrogel containing a mild photothermal agent (TPE-BBT) and a glutaminase inhibitor (CB-839). Within nanoparticles, TPE-BBT exhibits aggregation-induced emission peaked at 900 nm, while the unrestricted molecular motions endow TPE-BBT with a mild photothermy generation ability. The balanced photothermal effect and photoluminescence are ideal for phototheranostics. Upon 660-nm laser irradiation, the temperature-rising effect softens and hydrolyzes the hydrogel to release TPE-BBT and CB-839 into the tumor site for concurrent mild photothermal therapy and chemotherapy, jointly inhibiting homologous recombination repair of DNA. The enhanced FLASH radiotherapy efficiently kills the tumor tissue without recurrence and obvious systematic toxicity. This work deciphers the unrestricted molecular motions in bright organic fluorophores as a source of photothermy, and provides novel recurrence-resistant radiotherapy without adverse side effects.

Designing Dual-Responsive Drug Delivery Systems: The Role of Phase Change Materials and Metal-Organic Frameworks

Stimuli-responsive drug delivery systems (DDSs) offer precise control over drug release, enhancing therapeutic efficacy and minimizing side effects. This review focuses on DDSs that leverage the unique capabilities of phase change materials (PCMs) and metal-organic frameworks (MOFs) to achieve controlled drug release in response to pH and temperature changes. Specifically, this review highlights the use of a combination of lauric and stearic acids as PCMs that melt slightly above body temperature, providing a thermally responsive mechanism for drug release. Additionally, this review delves into the properties of zeolitic imidazolate framework-8 (ZIF-8), a stable MOF under physiological conditions that decomposes in acidic environments, thus offering pH-sensitive drug release capabilities. The integration of these materials enables the fabrication of complex structures that encapsulate drugs within ZIF-8 or are enveloped by PCM layers, ensuring that drug release is tightly controlled by either temperature or pH levels, or both. This review provides comprehensive insights into the core design principles, material selections, and potential biomedical applications of dual-stimuli responsive DDSs, highlighting the future directions and challenges in this innovative field.

Kartogenin delivery systems for biomedical therapeutics and regenerative medicine

Kartogenin, a small and heterocyclic molecule, has emerged as a promising therapeutic agent for incorporation into biomaterials, owing to its unique physicochemical and biological properties. It holds potential for the regeneration of cartilage-related tissues in various common conditions and injuries. Achieving sustained release of kartogenin through appropriate formulation and efficient delivery systems is crucial for modulating cell behavior and tissue function. This review provides an overview of cutting-edge kartogenin-functionalized biomaterials, with a primarily focus on their design, structure, functions, and applications in regenerative medicine. Initially, we discuss the physicochemical properties and biological functions of kartogenin, summarizing the underlying molecular mechanisms. Subsequently, we delve into recent advancements in nanoscale and macroscopic materials for the carriage and delivery of kartogenin. Lastly, we address the opportunities and challenges presented by current biomaterial developments and explore the prospects for their application in tissue regeneration. We aim to enhance the generation of insightful ideas for the development of kartogenin delivery materials in the field of biomedical therapeutics and regenerative medicine by providing a comprehensive understanding of common preparation methods.

Phase Change Materials Meet Microfluidic Encapsulation

Improving the utilization of thermal energy is crucial in the world nowadays due to the high levels of energy consumption. One way to achieve this is to use phase change materials (PCMs) as thermal energy storage media, which can be used to regulate temperature or provide heating/cooling in various applications. However, PCMs have limitations like low thermal conductivity, leakage, and corrosion. To overcome these challenges, PCMs are encapsulated into microencapsulated phase change materials (MEPCMs) capsules/fibers. This encapsulation prevents PCMs from leakage and corrosion issues, and the microcapsules/fibers act as conduits for heat transfer, enabling efficient exchange between the PCM and its surroundings. Microfluidics-based MEPCMs have attracted intensive attention over the past decade due to the exquisite control over flow conditions and size of microcapsules. This review paper aims to provide an overview of the state-of-art progress in microfluidics-based encapsulation of PCMs. The principle and method of preparing MEPCM capsules/fibers using microfluidic technology are elaborated, followed by the analysis of their thermal and microstructure characteristics. Meanwhile, the applications of MEPCM in the fields of building energy conservation, textiles, military aviation, solar energy utilization, and bioengineering are summarized. Finally, the perspectives on MEPCM capsules/fibers are discussed.

Electrospun Nanofibers: Shaping the Future of Controlled and Responsive Drug Delivery

Electrospun nanofibers for drug delivery systems (DDS) introduce a revolutionary means of administering pharmaceuticals, holding promise for both improved drug efficacy and reduced side effects. These biopolymer nanofiber membranes, distinguished by their high surface area-to-volume ratio, biocompatibility, and biodegradability, are ideally suited for pharmaceutical and biomedical applications. One of their standout attributes is the capability to offer the controlled release of the active pharmaceutical ingredient (API), allowing custom-tailored release profiles to address specific diseases and administration routes. Moreover, stimuli-responsive electrospun DDS can adapt to conditions at the drug target, enhancing the precision and selectivity of drug delivery. Such localized API delivery paves the way for superior therapeutic efficiency while diminishing the risk of side effects and systemic toxicity. Electrospun nanofibers can foster better patient compliance and enhanced clinical outcomes by amplifying the therapeutic efficiency of routinely prescribed medications. This review delves into the design principles and techniques central to achieving controlled API release using electrospun membranes. The advanced drug release mechanisms of electrospun DDS highlighted in this review illustrate their versatility and potential to improve the efficacy of medical treatments.

Phase Change Material-Embedded Multifunctional Janus Nanofiber Dressing with Directional Moisture Transport, Controlled Release of Anti-Inflammatory Drugs, and Synergistic Antibacterial Properties

Wound healing is a systematic and complex process that involves various intrinsic and extrinsic factors affecting different stages of wound repair. Therefore, multifunctional wound dressings that can modulate these factors to promote wound healing are in high demand. In this work, a multifunctional Janus electrospinning nanofiber dressing with antibacterial and anti-inflammatory properties, controlled release of drugs, and unidirectional water transport was prepared by depositing coaxial nanofibers on a hydrophilic poly(ε-caprolactone)@polydopamine-ε-polyl-lysine (PCL@PDA-ε-PL) nanofiber membrane. The coaxial nanofiber was loaded with the phase change material lauric acid (LA) in the shell layer and anti-inflammatory ibuprofen (IBU) in the core layer. Among them, LA with a melting point of 43 °C served as a phase change material to control the release of IBU. The phase transition of LA was induced by near-infrared (NIR) irradiation that triggered the photothermal properties of PDA. Moreover, the Janus nanofiber dressing exhibited synergistic antimicrobial properties for Escherichia coli and Staphylococcus aureus due to the photothermal properties of PDA and antibacterial ε-PL. The prepared Janus nanofiber dressing also exhibited anti-inflammatory activity and biocompatibility. In addition, the Janus nanofiber dressing had asymmetric wettability that enabled directional water transport, thereby draining excessive wound exudate. The water vapor transmission test indicated that the Janus nanofiber dressing had good air permeability. Finally, skin wound healing evaluation in rats confirmed its efficacy in promoting wound healing. Therefore, this strategy of designing and manufacturing a multifunctional Janus nanofiber dressing had great potential in wound healing applications.

Self-Luminescent Drug Delivery Vehicle: Synthesis, Self-Assembly Behavior, Cysteine-Responsive Property, and Application in the Visualization of Drug Release

Targeted drug delivery systems have gained great attention from the chemistry and biomedical fields in recent years due to the minimized harm to normal cells. When designing targeted drug delivery systems, the property of harmlessness to normal cells and the tracking ability of the whole process are quite crucial. These two characters can be brought into the related systems by applying a drug carrier that is self-luminescent and its drug release can be induced by the microenvironment of cancer cells. Therefore, the design and synthesis of drug delivery vehicles are significant for the fabrication of target drug delivery systems. Herein, we have synthesized a cysteine-responsive and fluorescent molecule, maleic acid-modified tetraphenylethylene derivative (MATPE), by a facile method. In addition, a drug delivery system with self-luminescence and cysteine-responsiveness based on the self-assembly of MATPE was fabricated. In this system, MATPE and cysteine both played dual roles as cysteine probe/drug carrier and emission-enhanced inducement/drug-release stimulus. The drug-release process was successfully realized in cancer cells and can be visualized, exhibiting great potential in the field of theranostics.

Hollow mesoporous organosilica nanoparticles reduced graphene oxide based nanosystem for multimodal image-guided photothermal/photodynamic/chemo combinational therapy triggered by near-infrared

Developing a nanosystem that can perform multimodal imaging-guided combination therapy is highly desirable but challenging. In this study, we introduced multifunctional nanoparticles (NPs) consisting of graphene oxide-grafted hollow mesoporous organosilica loaded with the drug doxorubicin (DOX) and photosensitizers tetraphenylporphyrin (TPP). These NPs were encapsulated by thermosensitive liposomes that release their contents once the temperature exceeds a certain threshold. Metal oxide NPs grown on the graphene oxide (GO) surface served multiple roles, including enhancing photothermal efficiency, acting as contrast agents to improve magnetic resonance imaging, increasing the sensitivity and specificity of photoacoustic imaging, and catalysing hydrogen peroxide for the generation of reactive oxygen species (ROS). When locally injected, the HMONs-rNGO@Fe3 O4 /MnOx@FA/DOX/TPP NPs effectively enriched in subcutaneous Hela cell tumour of mice. The photothermal/photodynamic/chemo combination therapy triggered by near-infrared (NIR) successfully suppressed the tumour without noticeable side effects. This study presented a unique approach to develop multimodal imaging-guided combination therapy for cancer.

Multifunctional Nanotheranostics for Dual-Modal Imaging-Guided Precision Therapy of Nasopharyngeal Carcinoma

Currently, the low survival rate and poor prognosis of patients with nasopharyngeal carcinoma are ascribed to the lack of early and accurate diagnosis and resistance to radiotherapy. In parallel, the integration of imaging-guided diagnosis and precise treatment has gained much attention in the field of theranostic nanotechnology. However, constructing dual-modal imaging-guided nanotheranostics with desired imaging performance as well as great biocompatibility remains challenging. Therefore, we developed a simple but multifunctional nanotheranostic GdCPP for the early and accurate diagnosis and efficient treatment of nasopharyngeal carcinoma (NPC), which combined fluorescence imaging and magnetic resonance imaging (MRI) onto a single nanoplatform for imaging-guided subsequent photodynamic therapy (PDT). GdCPP had an appropriate particle size (81.93 ± 0.69 nm) and was highly stable, resulting in sufficient tumor accumulation, which along with massive reactive oxygen species (ROS) generation upon irradiation further significantly killed tumor cells. Moreover, GdCPP owned much stronger r1 relaxivity (9.396 mM-1 s-1) compared to clinically used Gd-DTPA (5.034 mM-1 s-1) and exhibited better T1WI MRI performance. Under dual-modal imaging-guided PDT, GdCPP achieved efficient therapeutic outcomes without causing any noticeable tissue damage. The results of in vitro and in vivo studies indicated that GdCPP may be a suitable candidate for dual-modal imaging-guided precision tumor therapy.

Magnetic microspheres mimicking certain functions of macrophages: Towards precise antibacterial potency for bone defect healing

A variety of novel biomaterials have recently been developed to promote bone regeneration. However, the current biomaterials cannot accurately and effectively resist bacterial invasion. In this study, we constructed microspheres that mimic certain functions of macrophages as additives to bone repair materials, which can be manipulated as demanded to resist bacteria effectively and protect bone defect healing. Firstly, we prepared gelatin microspheres (GMSs) by an emulsion-crosslinking method, which were subsequently coated with polydopamine (PDA). Then, amino antibacterial nanoparticles obtained by a nanoprecipitation-self-assembly method and commercial amino magnetic nanoparticles were modified onto these PDA-coated GMSs to construct the functionalized microspheres (FMSs). The results showed that the FMSs possessed a rough topography and could be manipulated by a 100-400 ​mT static magnetic field to migrate directionally in unsolidified hydrogels. Moreover, in vitro experiments with near-infrared (NIR) showed that the FMSs had a sensitive and recyclable photothermal performance and could capture and kill Porphyromonas gingivalis by releasing reactive oxygen species. Finally, the FMSs were mixed with osteogenic hydrogel precursor, injected into the Sprague-Dawley rat periodontal bone defect of maxillary first molar (M1), and subsequently driven by magnetism to the cervical surface of M1 and the outer surface of the gel system for targeted sterilization under NIR, thus protecting the bone defect healing. In conclusion, the FMSs had excellent manipulation and antimicrobial performances. This provided us with a promising strategy to construct light-magnetism-responsive antibacterial materials to build a beneficial environment for bone defect healing.

Recent applications of phase-change materials in tumor therapy and theranostics

Phase-change materials (PCMs) are a type of special material which can store and release a large amount of thermal energy without any significant temperature change. They are emerging in recent years as a promising functional material in tumor therapy and theranostics due to their accurate responses to the temperature variations, biocompatibility and low toxicity. In this review, we will introduce the main types of PCMs and their desirable physiochemical properties for biomedical applications, and highlight the recent progress of PCM's applications in the modulated release of antitumor drugs, with special attentions paid to various ways to initiate temperature-dependent phase change, the concomitant thermal therapy and its combination with or activation of other therapies, particularly unconventional therapies. We will also summarize PCM's recent applications in tumor theranostics, where both drugs and imaging probes are delivered by PCMs for controlled drug release and imaging-guided therapy. Finally, the future perspectives and potential limitations of harnessing PCMs in tumor therapy will be discussed.

Phase-change composite filled natural nanotubes in hydrogel promote wound healing under photothermally triggered drug release

It is of great importance to treat a bacterial-infected wound by a smart dressing capable of delivering antibiotics in a smart manner without causing drug resistance. The construction of smart release nanocontainers responsive to near-infrared (NIR) laser irradiation in an on-demand and stepwise way is a promising strategy for avoiding the emergence of multidrug-resistant bacteria. Here, we develop a hydrogel composite made of alginate and nanotubes with an efficient NIR-triggered release of rifampicin and outstanding antibacterial ability. This composite hydrogel is prepared through co-encapsulating antibacterial drug (rifampicin), NIR-absorbing dye (indocyanine green), and phase-change materials (a eutectic mixture of fatty acids) into halloysite nanotubes, followed by incorporation into alginate hydrogels, allowing the in-situ gelation at room temperature and maintaining the integrity of drug-loaded nanotubes. Among them, the eutectic mixture with a melting point of 39 °C serves as the biocompatible phase-change material to facilitate the NIR-triggered drug release. The resultant phase-change material gated-nanotubes exhibit a prominent photothermal efficiency with multistep drug release under laser irradiation. In an in vitro assay, composite hydrogel provides good antibacterial potency against Staphylococcus aureus, one of the most prevalent microorganisms of dangerous gas gangrene. A bacterial-infected rat full-thickness wound model demonstrates that the NIR-responsive composite hydrogel inhibits the bacteria colonization and suppresses the inflammatory response caused by bacteria, promoting angiogenesis and collagen deposition to accelerate wound regeneration. The NIR-responsive composite hydrogel has a great potential as an antibacterial wound dressing functionalized with controlled multistep treatment of the infected sites.

•

Phase change material-gated nanocontainer exhibits an efficient NIR-triggered release of drugs.

•

Photothermal-responsive hydrogel shows efficient antibacterial properties through the NIR-responsive step-wise antibacterial drug release.

•

In vivo, photothermal-responsive hydrogel inhibits bacterial proliferation and effectively suppress the inflammatory response caused by bacteria, thus accelerating bacteria-infected wound regeneration.

•

Various types of drugs and biological effectors can be loaded in the nanotubes while the hydrogel matrix can also be regulated to achieve multiple healing functions.

Improving anti-tumor efficacy of low-dose Vincristine in rhabdomyosarcoma via the combination therapy with FOXM1 inhibitor RCM1

Rhabdomyosarcoma (RMS) is a highly metastatic soft-tissue sarcoma that often develops resistance to current therapies, including vincristine. Since the existing treatments have not significantly improved survival, there is a critical need for new therapeutic approaches for RMS patients. FOXM1, a known oncogene, is highly expressed in RMS, and is associated with the worst prognosis in RMS patients. In the present study, we found that the combination treatment with specific FOXM1 inhibitor RCM1 and low doses of vincristine is more effective in increasing apoptosis and decreasing RMS cell proliferation in vitro compared to single drugs alone. Since RCM1 is highly hydrophobic, we developed innovative nanoparticle delivery system containing poly-beta-amino-esters and folic acid (NP^FA), which efficiently delivers RCM1 to mouse RMS tumors in vivo. The combination of low doses of vincristine together with intravenous administration of NP^FA nanoparticles containing RCM1 effectively reduced RMS tumor volumes, increased tumor cell death and decreased tumor cell proliferation in RMS tumors compared to RCM1 or vincristine alone. The combination therapy was non-toxic as demonstrated by liver metabolic panels using peripheral blood serum. Using RNA-seq of dissected RMS tumors, we identified Chac1 as a uniquely downregulated gene after the combination treatment. Knockdown of Chac1 in RMS cells in vitro recapitulated the effects of the combination therapy. Altogether, combination treatment with low doses of vincristine and nanoparticle delivery of FOXM1 inhibitor RCM1 in a pre-clinical model of RMS has superior anti-tumor effects and decreases CHAC1 while reducing vincristine toxicity.

Hydroxyethyl starch-folic acid conjugates stabilized theranostic nanoparticles for cancer therapy

Small molecular prodrug-based nanomedicines with high drug-loading efficiency and tumor selectivity have attracted great attention for cancer therapy against solid tumors, including triple negative breast cancers (TNBC). However, abnormal tumor mechanical microenvironment (TMME) severely restricts antitumor efficacy of prodrug nanomedicines by limiting drug delivery and fostering cancer stem cells (CSCs). Herein, we employed carbamate disulfide bridged doxorubicin dimeric prodrug as pharmaceutical ingredient, marketed IR780 iodide as photothermal agent, and biocompatible hydroxyethyl starch-folic acid conjugates as amphiphilic surfactant to prepare a theranostic nanomedicine (FDINs), which could actively target at TNBC 4T1 tumor tissues and achieve reduction-responsive drug release with high glutathione concentration in cancer cells and CSCs. Importantly, in addition to directly causing damage to cancer cells and sensitizing chemotherapy, FDINs-mediated photothermal effect regulates aberrant TMME via reducing cancer associated fibroblasts and depleting extracellular matrix proteins, thereby normalizing intratumor vessel structure and function to facilitate drug and oxygen delivery. Furthermore, FDINs potently eliminate CSCs by disrupting unique CSCs niche and consuming intracellular GSH in CSCs. As a result, FDINs significantly suppress tumor growth in both subcutaneous and orthotopic 4T1 tumors. This study provides novel insights on rational design of prodrug nanomedicines for superior therapeutic effect against stroma- and CSCs-rich solid malignancies.

Nanoparticles-based phototherapy systems for cancer treatment: Current status and clinical potential

Remarkable progress in phototherapy has been made in recent decades, due to its non-invasiveness and instant therapeutic efficacy. In addition, with the rapid development of nanoscience and nanotechnology, phototherapy systems based on nanoparticles or nanocomposites also evolved as an emerging hotspot in nanomedicine research, especially in cancer. In this review, first we briefly introduce the history of phototherapy, and the mechanisms of phototherapy in cancer treatment. Then, we summarize the representative development over the past three to five years in nanoparticle-based phototherapy and highlight the design of the innovative nanoparticles thereof. Finally, we discuss the feasibility and the potential of the nanoparticle-based phototherapy systems in clinical anticancer therapeutic applications, aiming to predict future research directions in this field. Our review is a tutorial work, aiming at providing useful insights to researchers in the field of nanotechnology, nanoscience and cancer.

Advances in stimuli-responsive systems for pesticides delivery: Recent efforts and future outlook

Effective pest management for enhanced crop output is one of the primary goals of establishing sustainable agricultural practices in the world. Pesticides are critical in preventing biological disasters, ensuring crop productivity, and fostering sustainable agricultural production growth. Studies showed that crops are unable to properly utilize pesticides because of several limiting factors, such as leaching and bioconversion, thereby damaging ecosystems and human health. In recent years, stimuli-responsive systems for pesticides delivery (SRSP) by nanotechnology demonstrated excellent promise in enhancing the effectiveness and safety of pesticides. SRSP are being developed with the goal of delivering precise amounts of active substances in response to biological needs and environmental factors. An in-depth analysis of carrier materials, design fundamentals, and classification of SRSP were provided. The adhesion of SRSP to crop tissue, absorption, translocation in and within plants, mobility in the soil, and toxicity were also discussed. The problems and shortcomings that need be resolved to accelerate the actual deployment of SRSP were highlighted in this review.

Glucose-responsive nanoparticles designed via a molecular-docking-driven method for insulin delivery

Nocturnal blood glucose regulation was one of the key challenges in diabetic treatments. However, development of the smart insulin complexes with mild and glucose-responsive delivering performances was mostly relied on experience of the senior researchers and numerous confirmation experiments. In this work, a series of bioinspired fatty-acid-modified glucose-responsive insulin-delivering polymeric nanoparticles were designed. The molecular docking technique was utilized to efficiently screen the fatty-acid-derived functional groups. The results provided the basis for polymer functionalization and simplified the optimization experiments. For the optimized formulation (C10MS), insulin-loaded C10MS successfully fulfilled the nocturnal-glycemic-controlling requirement of the diabetic rats with lower occurrence of hypoglycemia than the conventional insulin injection schemes. Such formulation also possessed good biocompatibility with the moderate elimination kinetics in vivo, which matched the demand of bio-safety in the daily treatments. Overall, this work opened up a new path for efficient design of functional polymeric materials.

A Novel Instantaneous Self-Assembled Hollow MOF-Derived Nanodrug for Microwave Thermo-Chemotherapy in Triple-Negative Breast Cancer

Hollow materials derived from metal-organic frameworks (MOFs) have emerged in the biomedical field due to their unique properties, and different synthesis methods have been proposed. However, so far, the large-scale use of hollow MOFs is mostly limited by the timeliness of synthesis methods. Herein, we propose a new ultrasonic aerosol flow strategy for the instantaneous synthesis of a Zr-MOF-derived hollow sphere complex (ZC-HSC) in only one step. Through rapid transient heating, the coordination between metal salts and organic ligands occurs along with prompt evaporation of the solvent. The whole process lasts for only about 21 s, compared with several steps that take hours or even days for conventional synthesis methods. Based on the ZC-HSC, we designed a nanodrug with the functions of manipulating the tumor microenvironment, which can reshape the tumor microenvironment by improving tumor hypoxia and inflammatory microenvironment and promoting antiangiogenic therapy. Combined with microwave thermo-chemotherapy, the nanodrugs effectively treat triple-negative breast cancer (the tumor cell survival rate was only 34.76 and 31.05% in normoxic and hypoxic states, respectively, and the tumor inhibition rate reached 87.9% at the animal level), providing a new theoretical basis for the treatment of triple-negative breast cancer. This rapid, one-step, and continuous ultrasonic aerosol flow strategy has bright prospects in the synthesis of MOF-derived hollow materials and promotes the further development of large-scale applications of biological nanomaterials.

A Smart Photothermal Nanosystem with an Intrinsic Temperature-Control Mechanism for Thermostatic Treatment of Bacterial Infections

Photothermal therapy (PTT) has attracted extensive attention in disease treatments. However, conventional photothermal systems do not possess a temperature-control mechanism, which poses a serious risk to healthy tissues and/or organs due to inevitable thermal damage. Herein, a smart photothermal nanosystem with an intrinsic temperature-control mechanism for thermostatic treatment of bacterial infections is reported. The smart photothermal nanosystem is constructed by loading a thermochromic material into a hollow-structured silica nanocarrier, in which the thermochromic material is composed of naturally occurring phase-change materials (PCMs), a proton-responsive spirolactone, and a proton source. The resulting nanosystem shows strong near-infrared (NIR) absorption and efficient photothermal conversion in solid PCMs but becomes NIR-transparent when PCMs are melted upon NIR irradiation. Such an attractive feature can precisely regulate the photothermal equilibrium temperature to the melting point of PCMs, regardless of the variation in external experimental parameters. In contrast to conventional PTT with severe thermal damage, the reported smart photothermal nanosystem provides an internal protection mechanism on healthy tissues and/or organs, which remarkably accelerates the recovery of bacteria-infected wounds. The smart photothermal nanosystem is a versatile PTT platform, holding great promise in the safe and efficient treatment of bacterial infections and multimodality synergistic therapy.

Applications of phase change materials in smart drug delivery for cancer treatment

Phase change materials (PCMs) are materials that are stimulated by the external enthalpy change (temperature) to realize solid-liquid and liquid-solid phase transformation. Due to temperature sensitivity, friendly modification, and low toxicity, PCMs have been widely used in smart drug delivery. More often than not, the drug was encapsulated in a solid PCMs matrix, a thermally responsive material. After the trigger implementation, PCMs change into a solid-liquid phase, and the loading drug is released accordingly. Therefore, PCMs can achieve precise release control with different temperature adjustments, which is especially important for small molecular drugs with severe side effects. The combination of drug therapy and hyperthermia through PCMs can achieve more accurate and effective treatment of tumor target areas. This study briefly summarizes the latest developments on PCMs as smart gate-keepers for anti-tumor applications in light of PCMs becoming a research hot spot in the nanomedicine sector in recent years.

Phase-change materials-based platforms for biomedicine

Recently, phase-change materials (PCMs) have gathered enormous attention in diverse fields of medicine, particularly in bioimaging, therapeutic delivery, and tissue engineering. Due to the excellent physicochemical characteristics and morphological characteristics of PCMs, several developments have been demonstrated in the construction of diverse PCMs-based architectures toward providing new burgeoning opportunities in developing innovative technologies and improving the therapeutic benefits of the existing formulations. However, the fabrication of PCM-based materials into colloidally stable particles remains challenging due to their natural hydrophobicity and high crystallinity. This review systematically emphasizes various PCMs-based platforms, such as traditional PCMs (liposomes) and their nanoarchitectured composites, including PCMs as core, shell, and gatekeeper, highlighting the pros and cons of these architectures for delivering bioactives, imaging anatomical features, and engineering tissues. Finally, we summarize the article with an exciting outlook, discussing the current challenges and future prospects for PCM-based platforms as biomaterials.

Lipid Membrane-Wrapped Zeolitic Imidazolate Framework-8 for Synergistic Chemotherapy and Photothermal Therapy to Target Prostate Cancer

Endocrine therapy is often used for advanced prostate cancer. However, with cancer progress, prostate cancer gradually resistant to hormone which lead to serious threatens to life of patients. Herein, a multifunctional synergistic core–shell nanoplatform is reported for improving the therapeutic effect of chemotherapy for advanced or metastatic prostate cancer, and reducing the risk of leakage of chemotherapy drugs. Particularly, Zeolitic imidazolate framework-8 (ZIF-8) is chosen as inner core to load doxorubicin, and the of liposomes which are embedded with IR780 iodide are used as outer shell, and further modified with target ligand that binds to luteinizing hormone releasing hormone receptor. The prepared nanocarrier exhibit satisfactory photothermal effect under near infrared laser irradiation, and the temperature increases to 60.8 °C within 6 min. Meanwhile, the elevated temperature accelerates the degradation of lipid shell, releasing ZIF-8 core to acidic microenvironment of tumor, and resulting in the release of doxorubicin. Moreover, in vivo and in vitro studies have shown the ZIF-D@ALIP core–shell nanoparticles can achieve targeted drug delivery, pH and NIR dual stimuli-responsive drug release, as well as chemotherapy and photothermal therapy synergistically on the tumor site. In addition, the problem of premature leakage and changes in the physicochemical properties of anticancer drugs are avoided under the protection of the outer shell structure. Therefore, the core–shell nanostructure proposes a new lipid membrane coating strategy to promote the effective targeting of prostate cancer cells or tissues and provides some insights in clinical treatment for advanced prostate cancer.

Targeted intelligent mesoporous polydopamine nanosystems for multimodal synergistic tumor treatment

Developing intelligent responsive platforms to carry out high-performance therapy is of great interest for the treatment of tumors and their metastases. However, effective drug loading, activity maintenance, off-target leakage, and response to collaborative therapy remain great challenges. Herein, a targeted intelligent responsive mesoporous polydopamine (MPDA) nanosystem was reported for use in gene-mediated photochemotherapy for synergistic tumor treatment. First, the MPDA was surface modified to maintain a positive charge near the surface and to impart active targeting. Then, gambogic acid (GA) was encapsulated in the MPDA, solidified by phase change materials (PCMs), and finally loaded with siRNA by electrostatic interactions to obtain the smart nanodelivery system (PPMD@GA/si). In vitro and in vivo experiments showed that it not only effectively avoids siRNA inactivation and accidental release of GA, but also possesses potential for targeted accumulation to tumor tissue and mild-temperature photothermal therapy and chemotherapy via near infrared (NIR) radiation. Additionally, the release of siRNA could also effectively inhibit tumor invasion and metastasis to realize multimodal synergistic therapy. Overall, our studies provide a promising idea for synergistic tumor and metastasis treatment based on vector construction.

A Porous Bimetallic Au@Pt Core-Shell Oxygen Generator to Enhance Hypoxia-Dampened Tumor Chemotherapy Synergized with NIR-II Photothermal Therapy

The characteristic hypoxia of solid tumors and inadequate oxygen supply become a key causation of the resistance to chemotherapy in cancer treatment. Herein, a bimetallic oxygen nanogenerator, i.e., porous Au@Pt core-shell nanostructures, is particularly developed to reduce the multidrug resistance by oxygenating the tumor along with synergistic chemo-photothermal therapy for efficient tumor eradication. The porous platinum (Pt) shell was able to catalyze oxygen generation from endogenous hydrogen peroxide in the tumor, reducing the exocytosis of doxorubicin (DOX) via suppressed expression of hypoxia-inducible factor-1α, multidrug resistance gene 1, and P-glycoprotein. The strong absorbance of Au@Pt nanostructures in NIR window II enabled NIR-II photothermal therapy. Further incorporation of DOX into the mesopores of Au@Pt nanostructures with the assistance of phase change materials (PCM) led to the formulation of Au@Pt-DOX-PCM-PEG nanotherapeutics for NIR-II-activated chemotherapy. This work presents an efficient H₂O₂-driven oxygenerator for enhanced hypoxia-dampened chemotherapy and NIR-II photothermal therapy.

Molecular Motion and Nonradiative Decay: Towards Efficient Photothermal and Photoacoustic Systems

Nonradiative decay invariably competes with radiative decay during the deexcitation process of matter. In the community of luminescence research, nonradiative decay has been deemed less attractive than radiative decay. However, all things in their being are good for something and so is nonradiative decay. As the molecular motion-facilitated nonradiative decay (MMFND) effect is inevitable in photophysical processes, it provides a new avenue to convert the harvested light energy into exploitable forms by harnessing molecular motion. In many cases, active molecular motion enables thermal deactivation from excited states. In this Minireview, recent advances in photothermal and photoacoustic systems with MMFND character are summarized. We believe that this presentation of the rational engineering of molecular motion for efficient photothermal generation will deepen the understanding of the relationship between molecular motion and nonradiative decay and navigate people to rethink the positive aspects of nonradiative decay for the establishment of new light-controllable techniques.

Near Infrared-Triggered Theranostic Nanoplatform with Controlled Release of HSP90 Inhibitor for Synergistic Mild Photothermal and Enhanced Nanocatalytic Therapy with Hypoxia Relief

Mild photothermal therapy (PTT, <45 °C) can prevent tumor metastasis and heat damage to normal tissue, compared with traditional PTT (>50 °C). However, its therapeutic efficacy is limited owing to the hypoxic tumor environment and tumor thermoresistance owing to the overproduction of heat shock proteins (HSPs). Herein, a near-infrared (NIR)-triggered theranostic nanoplatform (GA-PB@MONs@LA) is designed for synergistic mild PTT and enhanced Fenton nanocatalytic therapy against hypoxic tumors. The nanoplatform is fabricated by the confined formation of Prussian blue (PB) nanoparticles in mesoporous organosilica nanoparticles (MONs), followed by the loading of gambogic acid (GA), an HSP90 inhibitor, and coating with thermo-sensitive lauric acid (LA). Upon NIR irradiation, the photothermal effect (44 °C) of PB not only induces apoptosis of tumor cells but also triggers the on-demand release of GA, inhibiting the production of HSP90. Moreover, the delivered heat simultaneously enhances the catalase-like and Fenton activity of PB@MONs@LA in an acidic tumor microenvironment, relieving the tumor hypoxia and promoting the generation of highly toxic •OH. In addition, the nanoplatform enables magnetic resonance/photoacoustic dual-modal imaging. Thus, this study describes a distinctive paradigm for the development of NIR-triggered theranostic nanoplatforms for enhanced cancer therapy.

Temperature-Sensitive Anti-Inflammatory Organohydrogels Containing Janus Particle Stabilized Phase-Change Microinclusions

A fabrication strategy for multifunctional organohydrogels is proposed, which combines phase-change microinclusions within a double-network (DN) hydrogel under the stabilization of Janus particles. Janus particles possess reactivity and colloidal stability for more robust organohydrogels, while the interstice among Janus particles enhances the mass transfer between the phase interfaces. Moreover, DN hydrogels are achieved through dynamic cross-linking networks, endowing organohydrogels with injectability and self-healing performance. Phase-change microinclusions are beneficial to the organohydrogels with temperature-responsive mechanical property and temperature-programed shape-memory performance. Organohydrogels can be employed for temperature therapy through the melting-crystallization process of phase-change microinclusions. Simultaneously, the payloads within microinclusions can be released for antibacteria upon melting the encapsulated wax. The organohydrogels can be served as an ideal dressing with temperature-responsive mechanical property, temperature therapy effectiveness, and temperature-triggered antibacterial ability.

Investigation of Eutectic Mixtures of Fatty Acids as a Novel Construct for Temperature-Responsive Drug Delivery

Background

Most of the traditional nanocarriers of cancer therapeutic moieties present dose-related toxicities due to the uptake of chemotherapeutic agents in normal body cells. The severe life-threatening effects of systemic chemotherapy are well documented. Doxorubicin, DOX is the most effective antineoplastic agent but with the least specific action that is responsible for severe cardiotoxicity and myelosuppression that necessitates careful monitoring while administering. Stimuli-sensitive/intelligent drug delivery systems, specifically those utilizing temperature as an external stimulus to activate the release of encapsulated drugs, have become a subject of recent research. Thus, it would be ideal to have a nanocarrier comprising safe excipients and controllable drug release capacity to deliver the drug at a particular site to minimize unwanted and toxic effects of chemotherapeutics. We have developed a simple temperature-responsive nanocarrier based on eutectic mixture of fatty acids. This study aimed to develop, physicochemically characterize and investigate the biological safety of eutectic mixture of fatty acids as a novel construct for temperature-responsive drug release potential.

Methods

We have developed phase change material, PCM, based on a series of eutectic mixtures of fatty acids due to their unique and attractive physicochemical characteristics such as safety, stability, cost-effectiveness, and ease of availability. The reversible solid-liquid phase transition of PCM is responsible to hold firm or actively release the encapsulated drug. The eutectic mixtures of fatty acids (stearic acid and myristic acid) along with liquid lipid (oleic acid) were prepared to exhibit a tunable thermoresponsive platform. Doxorubicin-loaded lipid nanocarriers were successfully developed with combined hot melt encapsulation (HME) and sonication method and characterized to achieve enhanced permeability and retention (EPR) effect-based solid tumor targeting in response to exogenous temperature stimulus. The cytotoxicity against melanoma cell lines and in vivo safety studies in albino rats was also carried out.

Results

Doxorubicin-loaded lipid nanocarriers have a narrow size distribution (94.59-219.3 nm), and a PDI (0.160-0.479) as demonstrated by photon correlation microscopy and excellent colloidal stability (Z.P value: -22.7 to -32.0) was developed. Transmission electron microscopy revealed their spherical morphology and characteristics of a monodispersed system. A biphasic drug release pattern with a triggered drug release at 41°C and 43°C and a sustained drug release was observed at 37°C. The thermoresponsive cytotoxic potential was demonstrated in B16F10 cancer cell lines. Hemolysis assay and acute toxicity studies with drug-free and doxorubicin lipid nanocarrier formulations provided evidence for their non-toxic nature.

Conclusion

We have successfully developed a temperature-responsive tunable platform with excellent biocompatibility and intelligent drug release potential. The formulation components being from natural sources present superior characteristics in terms of cost, compatibility with normal body cells, and adaptability to preparation methods. The reported preparation method is adapted to avoid complex chemical processes and the use of organic solvents. The lipid nanocarriers with tunable thermoresponsive characteristics are promising biocompatible drug delivery systems for improved localized delivery of chemotherapeutic agents.

Current Development of Nano-Drug Delivery to Target Macrophages

Macrophages are the most important innate immune cells that participate in various inflammation-related diseases. Therefore, macrophage-related pathological processes are essential targets in the diagnosis and treatment of diseases. Since nanoparticles (NPs) can be preferentially taken up by macrophages, NPs have attracted most attention for specific macrophage-targeting. In this review, the interactions between NPs and the immune system are introduced to help understand the pharmacokinetics and biodistribution of NPs in immune cells. The current design and strategy of NPs modification for specific macrophage-targeting are investigated and summarized.

Dual-targeting prodrug nanotheranostics for NIR-Ⅱ fluorescence imaging-guided photo-immunotherapy of glioblastoma

Glioblastoma (GBM) therapy is severely impaired by the blood–brain barrier (BBB) and invasive tumor growth in the central nervous system. To improve GBM therapy, we herein presented a dual-targeting nanotheranostic for second near-infrared (NIR-II) fluorescence imaging-guided photo-immunotherapy. Firstly, a NIR-Ⅱ fluorophore MRP bearing donor-acceptor-donor (D-A-D) backbone was synthesized. Then, the prodrug nanotheranostics were prepared by self-assembling MRP with a prodrug of JQ1 (JPC) and T7 ligand-modified PEG_5k-DSPE. T7 can cross the BBB for tumor-targeted delivery of JPC and MRP. JQ1 could be restored from JPC at the tumor site for suppressing interferon gamma-inducible programmed death ligand 1 expression in the tumor cells. MRP could generate NIR-II fluorescence to navigate 808 nm laser, induce a photothermal effect to trigger in-situ antigen release at the tumor site, and ultimately elicit antitumor immunogenicity. Photo-immunotherapy with JPC and MRP dual-loaded nanoparticles remarkably inhibited GBM tumor growth in vivo. The dual-targeting nanotheranostic might represent a novel nanoplatform for precise photo-immunotherapy of GBM.

Interfacial Superassembly of Light-Responsive Mechanism-Switchable Nanomotors with Tunable Mobility and Directionality

Mechanism-switchable nanomotors are expected to exhibit high adaptability and wide applicability. Herein, for the first time, we report a flask-shaped carbon@Pt@fatty-acid nanomotor with a light-induced switch between nonionic self-diffusiophoresis and bubble propulsion. This nanomotor is fabricated through superassembly of platinum nanoparticles on the surface of carbon nanobottles, and fatty acids are infused into the cavity of carbon nanobottles to serve as a light-sensitive switch. Such a nanomotor can be propelled via catalytic decomposition of H₂O₂ by platinum nanoparticles, exhibiting self-diffusiophoresis with opening-forward migration. Upon 980 nm laser irradiation, the fatty acids melt due to the photothermal effect and are released from the cavity, switching the dominant operational mechanism to bubble propulsion with bottom-forward migration. Compared with self-diffusiophoresis, bubble propulsion shows higher mobility and better directionality due to the hindered self-rotation. Simulation results further reveal that the confinement effect of the cavity, which facilitates the nucleation of nanobubbles, leads to the switch to bubble propulsion. This study offers an insight into the relationship between nanostructures, fundamental nanomotor operational mechanisms, and apparent propulsion performance, as well as provides a novel strategy for the regulation of movement, which is instructive for both the design and applications of nanomotors.

A hypoxia-responsive supramolecular formulation for imaging-guided photothermal therapy

Photothermal agents (PTAs) based on organic small-molecule dyes emerge as promising theranostic strategy in imaging and photothermal therapy (PTT). However, hydrophobicity, photodegradation, and low signal-to-noise ratio impede their transformation from bench to bedside. In this study, a novel supramolecular PTT formulation by a stimuli-responsive macrocyclic host is prepared to overcome these obstacles of organic small-molecule PTAs. Methods: Sulfonated azocalix[4]arene (SAC4A) was synthesized as a hypoxia-responsive macrocyclic host. Taking IR780 as an example, the supramolecular nanoformulation IR780@SAC4A was constructed by grinding method, and its solubility, photostability, and photothermal conversion were evaluated. The hypoxia tumor-selective imaging and supramolecular PTT of IR780@SAC4A were further evaluated in vitro and in vivo. Results: IR780@SAC4A is capable of enhancing the solubility, photostability, and photothermal conversion of IR780 significantly, which achieve this supramolecular formulation with good imaging-guided PTT efficacy in vitro and in vivo. Conclusions: This study demonstrates that the supramolecular PTT strategy is a promising cancer theranostic method. Moreover, this supramolecular approach is applicative to construct kinds of supramolecular PTAs, opening a general avenue for extending smart PTT formulations.

Nanomaterials based on phase change materials for antibacterial application

This review presented the applications of PCM-based nanomaterials in bacterial infections. Firstly, the composition and biotoxicity were outlined. Secondly, various antibacterial tactics were highlighted. Lastly, the perspectives were discussed.

Photothermally Triggered Melting and Perfusion: Responsive Colloidosomes for Cytosolic Delivery of Membrane-Impermeable Drugs in Tumor Therapy

Cell membrane barrier which dominates the therapeutic efficacy and systemic side effects is a major bottleneck in the field of drug delivery. Herein, a therapeutic system capable of photothermally triggered...

Near-infrared-II light excitation thermosensitive liposomes for photoacoustic imaging-guided enhanced photothermal-chemo synergistic tumor therapy

Despite the great success of photothermal therapy (PTT), it still suffers from many obstacles, such as the limited penetration depth of light, thermoresistance of tumors, and limitations of mono-therapeutic modalities. Herein, second near-infrared (NIR-II, 1064 nm) light excitation thermosensitive liposomes (DG@TLs) were fabricated for photoacoustic imaging (PAI) guided enhanced PTT-chemotherapy. DG@TLs were constructed by encapsulating NIR-II light excitation semiconducting polymers into liposomes composed of phase change materials (PCMs), along with gambogic acid (GA) with chemotherapeutic and heat shock protein inhibition effects. Under 1064 nm laser irradiation, DG@TLs exhibited superior NIR-II PAI and PTT performances with deep tissue penetration while triggering the thermoresponsive release of GA based on the phase transition of PCMs from solid to liquid. The released GA could enhance the NIR-II PTT efficacy by inhibiting the activity of HSP90, reducing the thermoresistance of tumors, exhibiting significant chemotherapeutic effects, and achieving synergistic anti-tumor efficiency. This work provides a new strategy for achieving on-demand drug release and effective theranostics in deep-seated tumor regions.

NIR-II Excitation Phototheranostic Nanomedicine for Fluorescence/Photoacoustic Tumor Imaging and Targeted Photothermal-Photonic Thermodynamic Therapy

The success of phototheranostics is hampered by some intrinsic defects, such as limited light penetration depth, heat resistance of tumor cells to photothermal therapy (PTT) induced by heat shock protein (HSP) and stress resistance against photodynamic therapy (PDT) caused by hypoxia microenvironment of tumor. Herein, a second near infrared (NIR-II) light excitation phototheranostic nanomedicine has been fabricated by integrating the semiconducting polymer, azo compound, and HSP inhibitor into a thermosensitive liposome, followed by modification with targeting aptamer, forming Lip(PTQ/GA/AIPH) for multimodal phototheranostics of triple-negative breast cancer (TNBC). The phototheranostic nanomedicine provides tumor targeting NIR-II fluorescence and photoacoustic dual-modal imaging, as well as NIR-II PTT. The released HSP inhibitor can effectively inhibit the activity of HSP for enhanced NIR-II PTT. Moreover, azo compound can be decomposed by the NIR-II photothermal activation, generating cytotoxic free radicals and realizing oxygen-irrelevant photonic thermodynamic therapy (PTDT) effects. Under the NIR-II laser irradiation, NIR-II fluorescence/photoacoustic dual-modal imaging guided enhanced NIR-II PTT and PTDT by Lip(PTQ/GA/AIPH), can achieve precise diagnosis and effective suppression of deep-seated TNBC with negligible side effects. This work develops a promising NIR-II excitation phototheranostic nanomedicine for spatiotemporally specific diagnosis and combination therapy of TNBC.

Phase-change mesoporous Prussian blue nanoparticles for loading paclitaxel and chemo-photothermal therapy of cancer

Complete treatment of cancer remains a major challenge today. Herein, a biocompatible drug delivery system named as PCM + PTX@mPBs/PEG was constructed. In this system, Paclitaxel (PTX) was blended with phase-change material (PCM) and loaded in mesoporous Prussian blue nanoparticles (mPBs), and chelated with polyethylene glycol at surface. The blank PCM@mPBs/PEG had uniform particle size distribution, large pore size to load drug, excellent photothermal efficiency and good biocompatibility. After loading PTX, PCM + PTX@mPBs/PEG was demonstrated with a high loading capacity and the drug presented temperature-responsive release characteristics. In addition, PTX can be released under the exposure of an NIR laser. In vitro cell experiments showed that nanoparticles can be exposed to near-infrared irradiation to increase uptake in cells, which enhanced anticancer activity. After tail vein injection of PCM + PTX@mPBs/PEG suspension in tumor-bearing mice, PCM + PTX@mPBs/PEG can accumulate at the tumor site through passive transport. The tumor was effectively suppressed by phototherapy and chemotherapy with few side effects. In summary, compared with photothermal therapy or chemotherapy alone, the prepared PCM + PTX@mPBs/PEG showed synergistic photothermal and chemotherapeutic effects on cancer treatment of mice.

A Sensitive and Reliable Organic Fluorescent Nanothermometer for Noninvasive Temperature Sensing

Sensing temperature at the subcellular level is of great importance for the understanding of miscellaneous biological processes. However, the development of sensitive and reliable organic fluorescent nanothermometers remains challenging. In this study, we report the fabrication of a novel organic fluorescent nanothermometer and study its application in temperature sensing. First of all, we synthesize a dual-responsive organic luminogen that can respond to the molecular state of aggregation and environmental polarity. Next, natural saturated fatty acids with sharp melting points as well as reversible and rapid phase transition are employed as the encapsulation matrix to correlate external heat information with the fluorescence properties of the luminogen. To apply the composite materials for biological application, we formulate them into colloidally dispersed nanoparticles by a technique that combines in situ surface polymerization and nanoprecipitation. As anticipated, the resultant zwitterionic nanothermometer exhibits sensitive, reversible, reliable, and multiparametric responses to temperature variation within a narrow range around the physiological temperature (i.e., 37 °C). Taking spectral position, fluorescence intensity, and fluorescence lifetime as the correlation parameters, the maximum relative thermal sensitivities are determined to be 2.15% °C^-1, 17.06% °C^-1, and 17.72% °C^-1, respectively, which are much higher than most fluorescent nanothermometers. Furthermore, we achieve the multimodal temperature sensing of bacterial biofilms using these three complementary fluorescence parameters. Besides, we also fabricate a cationic form of the nanothermometer to facilitate efficient cellular uptake, holding great promise for studying thermal behaviors in biological systems.

Thermal-triggered packing of lipophilic NIR dye IR780 in hepatitis B core at critical ionic strength and cargo-host ratio for improved stability and enhanced cancer phototherapy

Virus-like particles (VLPs) holding internal cavity with diameter from tens up to one hundred nanometers are attractive platform for drug delivery. Nevertheless, the packing of drugs in the nanocage mainly relies on complicated disassembly-reassembly process. In this study, hepatitis B core protein (HBc) VLPs which can withstand temperature up to 90 °C was employed as carrier to load a lipophilic near infrared dye IR780. It was found that an attaching-dis-atching-diffusing process was involved for the entering of IR780 in the cavity of HBc. The first two steps were associated with the electrostatic interactions between oppositely charged HBc and IR780, which was critically manipulated by ionic strength and HBc/IR780 mass ratio at which they were mixed; while the diffusion of IR780 across the shell of HBc showed a temperature-dependent manner that can be triggered by thermal induced pore-opening of the HBc capsid. At optimized condition, about 1055 IR780 molecules were encapsulated in each HBc by simply mixing them for 10 min at 60 °C. Compared with free IR780, the HBc-IR780 particles showed significantly improved aqueous and photostability, as well as enhanced photothermal and photodynamic performance for cancer therapy. This study provides a novel drug loading strategy and nanomemedicine for cancer phototherapies.

Target-triggered and controlled release plasmon-enhanced fluorescent AIE probe for conformational monitoring of insulin fibrillation

In this work, we constructed a target-triggered and controlled-release plasmon-enhanced fluorescent AIE probe to realize the purpose of conformational monitoring of insulin fibrillation. We synthesized a novel water-soluble anthracene derivative, 4,4',4'',4'''-(anthracene-9,10-diylbis(ethene-2,1,1-triyl))tetrakis(N,N,N-trimethylbenzenaminium) iodide (BDVAI), with AIE properties, high biocompatibility and good self-assembly effect. Gold nanocages (AuNCs) were selected as the substrate for PEF, and the inner space of hollow AuNCs was filled with BDVAI. Thiol-modified DNA chains were bonded to the surface of AuNCs by Au-S bonds, and an insulin aptamer was combined with the sulfhydryl chain to seal the AuNCs. This PEF-AIE sensor produces different fluorescence signals when interacting with native insulin and fibrillar insulin; thus, monitoring conformational changes in insulin can be realized by detecting fluorescence intensity changes during insulin fibrillation. Based on this design, this system realized sensitive detection of fibrillar insulin with a detection limit of 23.6 pM. This AIE molecular-based PEF fluorescence enhancement system improves the optical properties of fluorescent substances, which is of great significance in improving the detection sensitivity of amyloid fibrils conformational changes and providing a reliable basis for further understanding the pathogenesis of amyloidosis.