Plasma-Assisted Synthesis and Surface Modification of Electrode Materials for Renewable Energy

Comparative study on the activation of peroxymonosulfate and peroxydisulfate by Ar plasma-etching CNTs for sulfamethoxazole degradation: Efficiency and mechanisms

Sulfamethoxazole (SMX), a widely utilized antibiotic, was continually detected in the environment, causing serious risks to aquatic ecology and water security. In this study, carbon nanotubes (CNTs) with abundant defects were developed by argon plasma-etching technology to enhance the activation of persulfate (PS, including peroxymonosulfate (PMS) and peroxydisulfate (PDS)) for SMX degradation while reducing environmental toxicity. Obviously, the increase of ID/IG value from 0.980 to 1.333 indicated that Ar plasma-etching successfully introduced rich defects into CNTs. Of note, Ar-90-CNT, whose Ar plasma-etching time was 90 min with optimum catalytic performance, exhibited a significant discrepancy between PMS activation and PDS activation. Interestingly, though the Ar-90-CNT/PDS system (kobs = 0.0332 min-1) was more efficient in SMX elimination than the Ar-90-CNT/PMS system (kobs = 0.0190 min-1), Ar plasma-etching treatment had no discernible enhancement in the catalytic efficiency of MWCNT for PDS activation. Then the discrepancy on activation mechanism between PMS and PDS was methodically investigated through quenching experiments, electron spin resonance (ESR), chemical probes, electrochemical measurements and theoretical calculations, and the findings unraveled that the created vacancy defects were the ruling active sites for the production of dominated singlet oxygen (1O2) in the Ar-90-CNT/PMS system to degrade SMX, while the electron transfer pathway (ETP), originated from PDS activation by the inherent edge defects, was the central pathway for SMX removal in the Ar-90-CNT/PDS system. Based on the toxicity test of Microcystis aeruginosa, the Ar-90-CNT/PDS system was more effective in alleviating environmental toxicity during SMX degradation. These findings not only provide insights into the discrepancy between PMS activation and PDS activation via carbon-based materials with controlled defects regulated by the plasma-etching strategy, but also efficiently degrade sulfonamide antibiotics and reduce the toxicity of their products.

A Pressure and Proximity Sensor Based on Laser-Induced Graphene

Smart wearable devices are extensively utilized across diverse domains due to their inherent advantages of flexibility, portability, and real-time monitoring. Among these, flexible sensors demonstrate exceptional pliability and malleability, making them a prominent focus in wearable electronics research. However, the implementation of flexible wearable sensors often entails intricate and time-consuming processes, leading to high costs, which hinder the advancement of the entire field. Here, we report a pressure and proximity sensor based on oxidized laser-induced graphene (oxidized LIG) as a dielectric layer sandwiched by patterned LIG electrodes, which is characterized by high speed and cost-effectiveness. It is found that in the low-frequency range of fewer than 0.1 kHz, the relative dielectric constant of the oxidized LIG layer reaches an order of magnitude of 104. The pressure mode of this bimodal capacitive sensor is capable of detecting pressures within the range of 1.34 Pa to 800 Pa, with a response time of several hundred milliseconds. The proximity mode involves the application of stimulation using an acrylic probe, which demonstrates a detection range from 0.05 mm to 37.8 mm. Additionally, it has a rapid response time of approximately 100 ms, ensuring consistent signal variations throughout both the approach and withdrawal phases. The sensor fabrication method proposed in this project effectively minimizes expenses and accelerates the preparation cycle through precise control of laser processing parameters to shape the electrode-dielectric layer-electrode within a single substrate material. Based on their exceptional combined performance, our pressure and proximity sensors exhibit significant potential in practical applications such as motion monitoring and distance detection.

Acid etching post-treatment enhanced fungal sterilization performance of copper-manganese-cerium oxide in liquid and aerosol: Materials and molecular biological mechanisms

Bioaerosol is one of the main ways to spread respiratory infectious diseases. In order to further improve the sterilization efficiency of copper-manganese-cerium oxide (CuMnCeOx), the post-treatment method based on acid etching was adopted. The results showed that sterilization efficiency of the treated CuMnCeOx could reach 99% in aerosol with space velocity of 1400 h-1. L(+)-ascorbic acid successfully promoted the formation of Cu+, oxygen vacancies and the generation of reactive oxygen species (ROS) on the surface of the treated CuMnCeOx. During sterilization in liquid system, the transcriptome identified 316 differentially expressed genes, including 270 up-regulated genes and 46 down-regulated genes. Differentially expressed genes were significantly enriched in cell wall (GO:0005618) and external encapsulating structure (GO:0030312). Up-regulated genes were shown in regulation of reactive oxygen species biosynthetic processes (GO:1903409, GO:1903426, GO:1903428) and positive regulation all of reactive oxygen species metabolic process (GO:2000379), indicating that ROS induced cell death by destroying cell wall.

Plasma pyrolysis feasibility study of Spent Caustic waste to hydrogen production

Spent caustic is a used industrial caustic whose chemical content puts it in the special waste category. The disposal of this waste and the production of value-added products from it has attracted the attention of researchers not only to solve environmental problems but also to take advantage of its byproducts. This research has experimentally proved the transferred thermal plasma technology as a practical method feasible for the disposal of spent caustic. In this study, the applied voltage, electrical current, and feed rate are variable parameters, and others are kept constant. GC analysis showed H2 as the main product, which is environmentally beneficial. The percentage of hydrogen production of approximately 74% is a promising result, considering the difficulty of achieving such a high percentage of hydrogen.

Plasma-Engineering of Oxygen Vacancies on NiCo2O4 Nanowires with Enhanced Bifunctional Electrocatalytic Performance for Rechargeable Zinc-air Battery

Designing an efficient, durable, and inexpensive bifunctional electrocatalyst toward oxygen evolution reactions (OER) and oxygen reduction reactions (ORR) remains a significant challenge for the development of rechargeable zinc-air batteries (ZABs). The generation of oxygen vacancies plays a vital role in modifying the surface properties of transition-metal-oxides (TMOs) and thus optimizing their electrocatalytic performances. Herein, a H2/Ar plasma is employed to generate abundant oxygen vacancies at the surfaces of NiCo2O4 nanowires. Compared with the Ar plasma, the H2/Ar plasma generated more oxygen vacancies at the catalyst surface owing to the synergic effect of the Ar-related ions and H-radicals in the plasma. As a result, the NiCo2O4 catalyst treated for 7.5 min in H2/Ar plasma exhibited the best bifunctional electrocatalytic activities and its gap potential between Ej = 10 for OER and E1/2 for ORR is even smaller than that of the noble-metal-based catalyst. In situ electrochemical experiments are also conducted to reveal the proposed mechanisms for the enhanced electrocatalytic performance. The rechargeable ZABs, when equipped with cathodes utilizing the aforementioned catalyst, achieved an outstanding charge-discharge gap, as well as superior cycling stability, outperforming batteries employing noble-metal catalyst counterparts.

Enhanced CO2 Electroreduction to Multi-Carbon Products on Copper via Plasma Fluorination

The electroreduction of carbon dioxide (CO2) to multi-carbon (C2+) compounds offers a viable approach for the up-conversion of greenhouse gases into valuable fuels and feedstocks. Nevertheless, current industrial applications face limitations due to unsatisfactory conversion efficiency and high overpotential. Herein, a facile and scalable plasma fluorination method is reported. Concurrently, self-evolution during CO2 electroreduction is employed to control the active sites of Cu catalysts. The copper catalyst modified with fluorine exhibits an impressive C2+ Faradaic efficiency (FE) of 81.8% at a low potential of -0.56 V (vs a reversible hydrogen electrode) in an alkaline flow cell. The presence of modified fluorine leads to the exposure and stabilization of high-activity Cu+ species, enhancing the adsorption of *CO intermediates and the generation of *CHO, facilitating the subsequent dimerization. This results in a notably improved conversion efficiency of 13.1% and a significant reduction in the overpotential (≈100 mV) for the C2+ products. Furthermore, a superior C2+ FE of 81.6% at 250 mA cm-2, coupled with an energy efficiency of 31.0%, can be achieved in a two-electrode membrane electrode assembly electrolyzer utilizing the fluorine-modified copper catalyst. The strategy provides novel insights into the controllable electronic modification and surface reconstruction of electrocatalysts with practical potential.

Advances and challenges in the electrochemical reduction of carbon dioxide

The electrocatalytic carbon dioxide reduction reaction (ECO2RR) is a promising way to realize the transformation of waste into valuable material, which can not only meet the environmental goal of reducing carbon emissions, but also obtain clean energy and valuable industrial products simultaneously. Herein, we first introduce the complex CO2RR mechanisms based on the number of carbons in the product. Since the coupling of C-C bonds is unanimously recognized as the key mechanism step in the ECO2RR for the generation of high-value products, the structural-activity relationship of electrocatalysts is systematically reviewed. Next, we comprehensively classify the latest developments, both experimental and theoretical, in different categories of cutting-edge electrocatalysts and provide theoretical insights on various aspects. Finally, challenges are discussed from the perspectives of both materials and devices to inspire researchers to promote the industrial application of the ECO2RR at the earliest.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Plasma-assisted manipulation of vanadia nanoclusters for efficient selective catalytic reduction of NOx

Supported nanoclusters (SNCs) with distinct geometric and electronic structures have garnered significant attention in the field of heterogeneous catalysis. However, their directed synthesis remains a challenge due to limited efficient approaches. This study presents a plasma-assisted treatment strategy to achieve supported metal oxide nanoclusters from a rapid transformation of monomeric dispersed metal oxides. As a case study, oligomeric vanadia-dominated surface sites were derived from the classic supported V2O5-WO3/TiO2 (VWT) catalyst and showed nearly an order of magnitude increase in turnover frequency (TOF) value via an H2-plasma treatment for selective catalytic reduction of NO with NH3. Such oligomeric surface VOx sites were not only successfully observed and firstly distinguished from WOx and TiO2 by advanced electron microscopy, but also facilitated the generation of surface amide and nitrates intermediates that enable barrier-less steps in the SCR reaction as observed by modulation excitation spectroscopy technologies and predicted DFT calculations.

A novel two-dimensional Janus TiSiGeN4 monolayer with N vacancies for efficient photocatalytic nitrogen reduction

The photocatalytic nitrogen reduction reaction (pNRR) is a clean technology that converts H2O and N2 into NH3 under environmental conditions using inexhaustible sunlight. Herein, we designed a novel two-dimensional (2D) Janus TiSiGeN4 structure and evaluated the pNRR performance of the structure with the presence of nitrogen vacancies at different positions using density functional theory (DFT) calculations. The intrinsic dipoles in the Janus TiSiGeN4 structure generate a built-in electric field, which promotes the migration of photogenerated electrons and holes towards the (001) and (00-1) surfaces, respectively, to achieve efficient charge separation. For the pNRR, the Si atoms exposed after the formation of top N vacancies can realize the efficient activation of N2 through the "acceptance-donation" mechanism, while the presence of middle N vacancies not only suppresses the hydrogen evolution reaction, a competition reaction, but also lowers the reaction barrier for the protonation of N atoms. The limiting potential of TiSiGeN4 with the coexistence of both top and middle N vacancies (TiSiGeN4-VN-mt) is as low as -0.44 V. In addition, the introduction of N vacancies generates defect levels, narrowing the band gap and improving the light response. This work provides theoretical guidance for the design of efficient pNRR photocatalysts under mild conditions.

Plasma Technology for Advanced Electrochemical Energy Storage

"Carbon Peak and Carbon Neutrality" is an important strategic goal for the sustainable development of human society. Typically, a key means to achieve these goals is through electrochemical energy storage technologies and materials. In this context, the rational synthesis and modification of battery materials through new technologies play critical roles. Plasma technology, based on the principles of free radical chemistry, is considered a promising alternative for the construction of advanced battery materials due to its inherent advantages such as superior versatility, high reactivity, excellent conformal properties, low consumption and environmental friendliness. In this perspective paper, we discuss the working principle of plasma and its applied research on battery materials based on plasma conversion, deposition, etching, doping, etc. Furthermore, the new application directions of multiphase plasma associated with solid, liquid and gas sources are proposed and their application examples for batteries (e. g. lithium-ion batteries, lithium-sulfur batteries, zinc-air batteries) are given. Finally, the current challenges and future development trends of plasma technology are briefly summarized to provide guidance for the next generation of energy technologies.

Recent Progress of Vertical Graphene: Preparation, Structure Engineering, and Emerging Energy Applications

Vertical graphene (VG) nanosheets have garnered significant attention in the field of electrochemical energy applications, such as supercapacitors, electro-catalysis, and metal-ion batteries. The distinctive structures of VG, including vertically oriented morphology, exposed, and extended edges, and separated few-layer graphene nanosheets, have endowed VG with superior electrode reaction kinetics and mass/electron transportation compared to other graphene-based nanostructures. Therefore, gaining insight into the structure-activity relationship of VG and VG-based materials is crucial for enhancing device performance and expanding their applications in the energy field. In this review, the authors first summarize the fabrication methods of VG structures, including solution-based, and vacuum-based techniques. The study then focuses on structural modulations through plasma-enhanced chemical vapor deposition (PECVD) to tailor defects and morphology, aiming to obtain desirable architectures. Additionally, a comprehensive overview of the applications of VG and VG-based hybrids d in the energy field is provided, considering the arrangement and optimization of their structures. Finally, the challenges and future prospects of VG-based energy-related applications are discussed.

The application of plasma technology for the preparation of supercapacitor electrode materials

With the rapidly growing demand for clean energy and energy interconnection, there is an urgent need for rapid and high-capacity energy storage technologies to realize large-scale energy storage, transfer energy, and establish the energy internet. Supercapacitors, which have advantages such as high specific capacitance, fast charging and discharging rates, and long cycle lifetimes, are being widely used in electric vehicles, information technology, aerospace, and other fields. The performance of supercapacitors is crucially dependent on electrode materials. These can be categorized into electric double-layer capacitors and pseudocapacitors, primarily made from carbon and transition metal oxides, respectively. However, effectively monitoring the physicochemical properties of electrode materials during preparation and processing is challenging, which limits the improvement of supercapacitors' performance. Plasma materials preparation technology can effectively affect the materials preparation processing by energetic electrons, ions, free radicals, and multiple effects in plasma, which are easily manipulated by operation parameters. Therefore, plasma material preparation technology is considered a promising method to precisely monitor the physicochemical and electrochemical properties of energy storage materials and has been widely studied. This paper provides an overview of plasma materials preparation mechanisms, and details of the plasma technology application in the preparation of transition metal hybrids, carbon, and composite electrode materials, as well as a comparison with traditional methods. In conclusion, the advantages, challenges, and research directions of plasma materials preparation technology in the field of electrode materials preparation are summarized.

Development of plasma technology for the preparation and modification of energy storage materials

The development of energy storage material technologies stands as a decisive measure in optimizing the structure of clean and low-carbon energy systems. The remarkable activity inherent in plasma technology imbues it with distinct advantages in surface modification, functionalization, synthesis, and interface engineering of materials. This review systematically expounds upon the principles, classifications, and application scenarios of plasma technology, while thoroughly discussing its unique merits in the realm of modifying electrode materials, solid-state electrolytes, and conductive carbon materials, which are widely used in lithium-ion batteries, sodium ion batteries, metal air batteries and other fields. Finally, considering the existing constraints associated with lithium-ion batteries, some application prospects of plasma technology in the energy storage field are suggested. This work is of great significance for the development of clean plasma technology in the field of energy storage.

A Comprehensive Review on the Boosted Effects of Anion Vacancy in the Heterogeneous Photocatalytic Degradation, Part II: Focus on Oxygen Vacancy

Environmental problems, including the increasingly polluted water and the energy crisis, have led to a need to propose novel strategies/methodologies to contribute to sustainable progress and enhance human well-being. For these goals, heterogeneous semiconducting-based photocatalysis is introduced as a green, eco-friendly, cost-effective, and effective strategy. The introduction of anion vacancies in semiconductors has been well-known as an effective strategy for considerably enhancing the photocatalytic activity of such photocatalytic systems, giving them the advantages of promoting light harvesting, facilitating photogenerated electron-hole pair separation, optimizing the electronic structure, and enhancing the yield of reactive radicals. This Review will introduce the effects of anion vacancy-dominated photodegradation systems. Then, their mechanism will illustrate how an anion vacancy changes the photodegradation pathway to enhance the degradation efficiency toward pollutants and the overall photocatalytic performance. Specifically, the vacancy defect types and the methods of tailoring vacancies will be briefly illustrated, and this part of the Review will focus on the oxygen vacancy (OV) and its recent advances. The challenges and development issues for engineered vacancy defects in photocatalysts will also be discussed for practical applications and to provide a promising research direction. Finally, some prospects for this emerging field will be proposed and suggested. All permission numbers for adopted figures from the literature are summarized in a separate file for the Editor.

A fully automated Lab-on-a-Disc platform integrated a high-speed triggered siphon valve for PBMCs extraction

Human Peripheral Blood Mononuclear Cells (PBMCs) are isolated from peripheral blood and identified as any blood cell with a round nucleus that exhibits immune responses and undergoes immunophenotypic changes upon exposure to various pathophysiological stimuli. Obtaining high-recovery and clinical-grade PBMCs without decreasing cell viability and causing stress is crucial for disease diagnosis and successful immunotherapy. However, traditional manual PBMCs extraction methods rely on manual intervention with less recovery rate and reliability. In this study, we introduced a novel and efficient strategy for the fully automated extraction of PBMCs based on a Lab-on-a-Disk (LoaD) platform. The centrifugal chip used percoll as density gradient media (DGM) for separation and extraction on account of the density difference of cells in whole blood, without labeling and any additional extra cellular filtration or cell lysis steps. Above all, we proposed a high-speed triggered siphon valve, which was closed under the speed of cell sedimentation and subsequently opened by increasing speed to complete the extraction of PBMCs. It can avoid the problem that previous siphon valves rely on unstable hydrophilic surface treatment and prime under low/zero speed conditions. With valves and the clock channel integrated on the chip, users can achieve fully automated collection of PBMCs. Compared with the clinical laboratory results, the recovery rate of extracted PBMCs was 80 %. The experimental results prove that the high-speed triggered siphon valve improves the extraction efficiency of PBMCs. The robust chips, which are not only simple to manufacture and assemble but also stable and reliable to use, have great potential in biomedical and clinical applications.

Understanding the improvement mechanism of plasma etching treatment on oxygen reduction reaction catalysts

Plasma etching treatment is an effective strategy to improve the electrocatalytic activity, but the improvement mechanism is still unclear. In this work, a nitrogen-doped carbon nanotube-encased iron nanoparticles (Fe@NCNT) catalyst is synthesized as the model catalyst, followed by plasma etching treatment with different parameters. The electrocatalytic activity improvement mechanism of the plasma etching treatment is revealed by combining the physicochemical characterizations and electrochemical results. As a result, highly active metal-nitrogen species introduced by nitrogen plasma etching treatment are recognized as the main contribution to the improved electrocatalytic activity, and the defects induced by plasma etching treatment also contribute to the improvement of the electrocatalytic activity. In addition, the prepared catalyst also demonstrates superior ORR activity and stability than the commercial Pt/C catalyst.

Electronic Modulation of MoS2 Nanosheets by N-Doping for Highly Sensitive NO2 Detection at Room Temperature

Transition metal dichalcogenide (TMD) materials hold great promise for gas sensors working at room temperature (RT). But the low response and slow dynamics derived from pristine TMDs remain a challenge toward their real applications. In this work, we report an efficient N-doping strategy to modulate the electronic structure of MoS2 nanosheets (N-MoS2) to achieve improved detection toward NO2. The effect of N-doping on the sensor properties, which has been rarely investigated, is elucidated by both experimental and computational studies. Due to N-doping, the Fermi level of N-MoS2 decreased from -5.29 to -5.33 eV and the band gap was reduced from 1.79 to 1.65 eV. The smaller band gap indicated the reduced resistance of N-MoS2 compared to that of original MoS2. As a result, the response of the MoS2 sensor to 10 ppm of NO2 was improved from 1.23 to 2.31 at RT. The sensor also has a limit of detection (LOD) of 62.5 ppb. To explain the effect of N-doping, density functional theory (DFT) calculations were conducted to figure out the important roles played by N-doping. This work demonstrates a pathway to modulate the chemical and electronic structures of TMD materials for advanced sensors.

Oxygen evolution catalyzed by Ni-Co-Nb ternary metal sulfides on plasma-activated Ni-Co support

As a four-electron-proton coupled reaction, the oxygen evolution reaction (OER) requires a high overpotential for electrocatalytic water splitting. Most of the reported OER catalysts still need higher overpotentials than the thermodynamic water decomposition potential (1.23 V). Therefore, developing the efficient and cost-effective OER electrocatalysts remains a challenge in the electrocatalysis filed. Herein, multiphase Ni-Co-Nb sulfides (NiCoNbSx) are in-situ engineered on the plasma-activated nickel-cobalt foam (PNCF), and the synthesized NiCoNbSx/PNCF exhibits rich heterointerfaces and active sites, causing a high OER performance in an alkaline medium. The NiCoNbSx/PNCF catalyst features the low overpotentials of 48 and 382 mV for delivering the current densities of 10 (j10) and 1000 mA cm-2 (j1000), with a good electrocatalytic stability. The theoretical calculations reveal that the heterojunction interface of NiS (401)-Co9S8 (440) acts as the active center for OER. These results provide a new effective surface modification approach and insights into catalytic processes enabling water electrolysis pursued for clean and sustainable energy applications.

Smart Aqueous Zinc Ion Battery: Operation Principles and Design Strategy

The zinc ion battery (ZIB) as a promising energy storage device has attracted great attention due to its high safety, low cost, high capacity, and the integrated smart functions. Herein, the working principles of smart responses, smart self-charging, smart electrochromic as well as smart integration of the battery are summarized. Thus, this review enables to inspire researchers to design the novel functional battery devices for extending their application prospects. In addition, the critical factors associated with the performance of the smart ZIBs are comprehensively collected and discussed from the viewpoint of the intellectualized design. A profound understanding for correlating the design philosophy in cathode materials and electrolytes with the electrode interface is provided. To address the current challenging issues and the development of smart ZIB systems, a wide variety of emerging strategies regarding the integrated battery system is finally prospected.

O2 plasma-modified carbon nanotube for sulfamethoxazole degradation via peroxymonosulfate activation: Synergism of radical and non-radical pathways boosting water decontamination and detoxification

Sulfamethoxazole (SMX), a widely used antibiotic, has triggered increasing attention due to its extensive detection in wastewater effluent, causing serious ecological threats. Herein, a carbon-based heterogeneous catalyst was developed by the O2 plasma-etching process, regulating oxygen-containing functional groups (OFGs) and defects of carbon nanotubes (O-CNT) to activate peroxymonosulfate (PMS) for highly efficient SMX abatement. Through adjusting the etching time, the desired active sites (i.e., C=O and defects) could be rationally created. Experiments collectively suggested that the degradation of SMX was owing to the contribution of synergism by radical (•OH (17.3%) and SO4•- (39.3%)) and non-radical pathways (1O2, 43.4%), which originated from PMS catalyzed by C=O and defects. In addition, the possible degradation products and transformation pathways of SMX in the system were inferred by combining the Fukui function calculations and the LC-MS/MS analysis. And the possible degradation pathway was effective in reducing the environmental toxicity of SMX, as evidenced by the T.E.S.T. software and the micronucleus experiment on Vicia faba root tip. Also, the catalytic system exhibited excellent performance for different antibiotics removal, such as amoxicillin (AMX), carbamazepine (CBZ) and isopropylphenazone (PRP). This study is expected to provide an alternative strategy for antibiotics removal in water decontamination and detoxification.

Rapid construction of Co/CoO/CoCH nanowire core/shell arrays for highly efficient hydrogen evolution reaction

The Co/CoO/CoCH (P-CoCH) nanowire core/shell arrays were prepared by a one step hydrothermal method and rapid reduction of cobalt carbonate hydroxide (CoCH) in Ar/H2 plasma for the first time. The rapid reduction process endows the P-CoCH with a unique porous structure, larger electrochemical active surface area and abundant activity sites. Therefore, the as-prepared P-CoCH nanowire core/shell arrays show superior HER performance with a low overpotential of 69 mV and a small Tafel slope of 47 mV dec-1 at a current density of 10 mA cm-2. In addition, the P-CoCH electrocatalyst demonstrates an excellent cycling stability without any obvious decay after 24 h continuous operation at 100 mA cm-2 current density. This study might provide a new insight into the rapidly construction of efficient HER Co-based electrocatalysts and beyond.

Optimization strategies of high-entropy alloys for electrocatalytic applications

High-entropy alloys (HEAs) are expected to become one of the most promising functional materials in the field of electrocatalysis due to their site-occupancy disorder and lattice order. The chemical complexity and component tunability make it possible for them to obtain a nearly continuous distribution of adsorption energy curve, which means that the optimal adsorption strength and maximum activity can be obtained by a multi-alloying strategy. In the last decade, a great deal of research has been performed on the synthesis, element selection and catalytic applications of HEAs. In this review, we focus on the analysis and summary of the advantages, design ideas and optimization strategies of HEAs in electrocatalysis. Combined with experiments and theories, the advantages of high activity and high stability of HEAs are explored in depth. According to the classification of catalytic reactions, how to design high-performance HEA catalysts is proposed. More importantly, efficient strategies for optimizing HEA catalysts are provided, including element regulation, defect regulation and strain engineering. Finally, we point out the challenges that HEAs will face in the future, and put forward some personal proposals. This work provides a deep understanding and important reference for electrocatalytic applications of HEAs.

Facile synthesis of Co-Fe layered double hydroxide nanosheets wrapped on Ni-doped nanoporous carbon nanorods for oxygen evolution reaction

Owing to the high demand for clean and renewable energy technologies, several studies have focused on developing economically feasible, highly effective, and stable non-precious electrocatalysts for promoting the oxygen evolution reaction (OER). This development has stimulated an expansion of investigative quests and indicated the importance of advancing electrocatalytic research in this field. Through a facile and efficient method, Ni nanoparticles were uniformly embedded into nanoporous carbon nanorods (Ni-NCN), which are subsequently electrodeposited on CoFe-layered double hydroxide (LDH) nanosheets to produce highly efficient Ni-NCN/CoFe-LDH composites used for OER. The composite exhibited excellent catalytic activity toward OER owing to its low overpotential (ƞ10 mA = 280 mV), small Tafel slope (42 mV dec-1), and excellent durability. The Ni-NCN/CoFe-LDH catalyst exhibited higher OER activity owing to its uniformly dispersed Ni nanoparticles, large specific surface area, enhanced electron transport, and synergistic effect of multiple composites. Additionally, the enhanced synergistic effect of Ni-NCN promoted higher OER performance compared with Ni-undoped carbon nanorod/LDH, indicating that the Ni dopant and LDH significantly contributed to the overall OER performance. The synergistic effect of multiple composites significantly contributed to the excellent OER performance, indicating their potential as OER catalyst.

Construction of Co/FeCo@Fe(Co)3O4 heterojunction rich in oxygen vacancies derived from metal-organic frameworks using O2 plasma as a high-performance bifunctional catalyst for rechargeable zinc-air batteries

Developing high-efficient, good-durability, and low-cost bifunctional non-precious metal catalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is urgent and significant for promoting the practical rechargeable zinc-air batteries (RZABs). Herein, N-doped carbon coated Co/FeCo@Fe(Co)3O4 heterojunction rich in oxygen vacancies derived from metal-organic frameworks (MOFs) is successfully constructed by O2 plasma treatment. The phase transition of Co/FeCo to FeCo oxide (Fe3O4/Co3O4) mainly occurs on the surface of nanoparticles (NPs) during the O2 plasma treatment, which can form rich oxygen vacancies simultaneously. The fabricated catalyst P-Co3Fe1/NC-700-10 with optimal O2 plasma treatment time of 10 min can reduce the potential gap between the OER and ORR to 760 mV, which is much lower than commercial 20% Pt/C + RuO2 (910 mV). Density functional theory (DFT) calculation indicates that the synergistic coupling between Co/FeCo alloy NPs and FeCo oxide layer can promote the ORR/OER performance. Both liquid electrolyte RZAB and flexible all-solid-state RZAB using P-Co3Fe1/NC-700-10 as the air-cathode catalyst display high power density, specific capacity and excellent stability. This work provides an effective idea for the development of high performance bifunctional electrocatalyst and the application of RZABs.

Direct current conduction mechanism in the methyl acrylate-vinyl acetate composite thin films

Plasma polymerized (PP) methyl acrylate (MA) and vinyl acetate (VA) composite thin films were deposited onto glass substrate varying MA and VA monomer concentrations. Thickness of the composite polymers is observed to vary on the MA and VA monomer ratios, where MA is found more reactive. The FESEM images of the composite polymers show better surface morphology compared to those of the homopolymers. Appearance of broad absorption bands in the FTIR spectra of polymer indicates the structural changes compared to monomer during polymerization. Thermogravimetric analysis and differential scanning calorimetry indicate that composite films are thermally more stable (up to 617 K) compared to homopolymer thin films (563 K). The current density versus voltage (J-V) characteristics of PP(MA-VA) composite films (sandwiched between aluminum electrodes) with different MA and VA ratios showed that the J values of the composite films gradually increase with elevating VA monomer and also with temperature (298-373 K). On the other hand, this value increases with decreasing the thickness of the composite films, which complies with the other studies. The conduction of the thickness-dependent composite films showed Ohmic in nature in the lower voltage region (< 10 V) while the space charge-limited conduction is found to be dominated in the higher voltage region (> 10 V) operating over the entire range of temperature. The activation energy at room temperature was found to be ~ 0.019 eV in the Ohmic region and 0.260 eV in the non-Ohmic region.

Unveiling the dynamic active site of defective carbon-based electrocatalysts for hydrogen peroxide production

Active sites identification in metal-free carbon materials is crucial for developing practical electrocatalysts, but resolving precise configuration of active site remains a challenge because of the elusive dynamic structural evolution process during reactions. Here, we reveal the dynamic active site identification process of oxygen modified defective graphene. First, the defect density and types of oxygen groups were precisely manipulated on graphene, combined with electrocatalytic performance evaluation, revealing a previously overlooked positive correlation relationship between the defect density and the 2 e- oxygen reduction performance. An electrocatalytic-driven oxygen groups redistribution phenomenon was observed, which narrows the scope of potential configurations of the active site. The dynamic evolution processes are monitored via multiple in-situ technologies and theoretical spectra simulations, resolving the configuration of major active sites (carbonyl on pentagon defect) and key intermediates (*OOH), in-depth understanding the catalytic mechanism and providing a research paradigm for metal-free carbon materials.

Preparation of Ir-Cu/C nanosheets for the oxygen evolution reaction by room temperature plasma carbonization

Ir-Cu/C nanosheets with a thickness of about 2 nm were prepared using Ar plasma carbonization and reduction at room temperature. The obtained Ir-Cu/C catalyst, composed of single atom Ir-doped Cu nanoparticles embedded in a carbon framework, exhibits efficient oxygen evolution reaction activity with a low overpotential.

Beyond Solvothermal: Alternative Synthetic Methods for Covalent Organic Frameworks

Covalent organic frameworks (COFs) are crystalline porous organic materials that hold a wealth of potential applications across various fields. The development of COFs, however, is significantly impeded by the dearth of efficient synthetic methods. The traditional solvothermal approach, while prevalent, is fraught with challenges such as complicated processes, excessive energy consumption, long reaction times, and limited scalability, rendering it unsuitable for practical applications. The quest for simpler, quicker, more energy-efficient, and environmentally benign synthetic strategies is thus paramount for bridging the gap between academic COF chemistry and industrial application. This Review provides an overview of the recent advances in alternative COF synthetic methods, with a particular emphasis on energy input. We discuss representative examples of COF synthesis facilitated by microwave, ultrasound, mechanic force, light, plasma, electric field, and electron beam. Perspectives on the advantages and limitations of these methods against the traditional solvothermal approach are highlighted.

Plasma-Activated Solutions Regulate Surface-Terminating Groups Enhancing Pseudocapacitive Ti3 C2 Tx Electrode Performance

2D transition metal carbides and nitrides (MXenes) are actively pursued as pseudocapacitive materials for supercapacitors owing to their advantages in electronic conductivity and surface reactivity. Increasing the fraction of ─O terminal groups in Ti3 C2 Tx is a promising approach to improve the pseudocapacitive charge storage in H2 SO4 electrolytes, but it suffers from a lack of effective functionalization methods and stability of the groups in practical operation. Here a low-temperature and environment-friendly approach via the interaction of nonequilibrium plasmas with Ti3 C2 Tx dispersion is demonstrated to generate abundant and stable surface-terminating O groups. The impact of the discharge environment (Ar, O2 , and H2 ) on the structural characteristics and electrochemical performance of Ti3 C2 Tx nanosheets is studied. The Ti3 C2 Tx modified in Ar and H2 maintains their original morphology but a significantly lower F content. Consequently, an extraordinarily high content (78.5%) of surface-terminating O groups is revealed by the high-resolution X-ray photoelectron spectroscopy spectra for the Ti3 C2 Tx samples modified in H2 plasma-treated solutions. Additionally, the Ti3 C2 Tx treated using H2 plasmas exhibits the best capacitive performance of 418.3 F g-1 at 2 mV s-1 , which can maintain 95.88% capacity after 10 000 cycles. These results contribute to the development of advanced nanostructured pseudocapacitive electrode materials for renewable energy storage applications.

Modification of Low-Energy Surfaces Using Bicyclic Peptides Discovered by Phage Display

Solid-binding peptides are a simple and versatile tool for the non-covalent modification of solid material surfaces, and a variety of peptides have been developed by reference to natural proteins or de novo design. Here, for the first time, we report the discovery of a bicyclic peptide targeting the heterogeneous material polypropylene by combining phage display technology and next-generation sequencing. We find that the enrichment properties of bicyclic peptides capable of binding to polypropylene are distinct from linear peptides, as reflected in amino acid abundance and a trend toward negative net charges and high hydrophobicity. The selected bicyclic peptide has a higher binding affinity for polypropylene compared with a previously reported linear peptide, enabling the hydrophilic and adhesive properties of the polypropylene to be more effectively enhanced. Our work paves the way for the exploration and utilization of conformational-restricted cyclic peptides as a new family of functionally evolvable agents for material surface modification.

A plasma-assisted approach to enhance density of accessible FeN4 sites for proton exchange membrane fuel cells

Enhancing the density and utilization of FeN₄ sites can serve as a viable approach to enhance the catalytic efficacy of iron nitrogen carbon (FeNC) catalysts for oxygen reduction reaction (ORR). Herein, we present a plasma-assisted method for enhancing the porosity of nitrogen-doped carbon. Our findings indicate that the ideal ratio of mesopore to micropore area is 0.463. This ratio not only promotes the diffusion of Fe³⁺ but also creates additional active sites for Fe³⁺ loading, leading to an increase in the number of available FeN₄ sites in FeNC electrocatalysts during pyrolysis. The density (76.5 μmol g^-1) and utilization (21.08 %) of d-FeNC-30 are significantly higher than those of FeNC without plasma treatment, with a 2.8-fold and 2-fold increase, respectively. Remarkably, it displays outstanding performance, evidenced by a half-wave potential of 0.835 V (vs. RHE) in a 0.1 M HClO₄ solution and a power density of 0.860 W cm^-2 in proton exchange membrane fuel cells (PEMFCs). The developed plasma-assisted approach for improving the site density (SD) and utilization of FeN₄ provides a new perspective for high-performance ORR FeNC catalysts.

Recent Advances on Transition-Metal-Based Layered Double Hydroxides Nanosheets for Electrocatalytic Energy Conversion

Transition-metal-based layered double hydroxides (TM-LDHs) nanosheets are promising electrocatalysts in the renewable electrochemical energy conversion system, which are regarded as alternatives to noble metal-based materials. In this review, recent advances on effective and facile strategies to rationally design TM-LDHs nanosheets as electrocatalysts, such as increasing the number of active sties, improving the utilization of active sites (atomic-scale catalysts), modulating the electron configurations, and controlling the lattice facets, are summarized and compared. Then, the utilization of these fabricated TM-LDHs nanosheets for oxygen evolution reaction, hydrogen evolution reaction, urea oxidation reaction, nitrogen reduction reaction, small molecule oxidations, and biomass derivatives upgrading is articulated through systematically discussing the corresponding fundamental design principles and reaction mechanism. Finally, the existing challenges in increasing the density of catalytically active sites and future prospects of TM-LDHs nanosheets-based electrocatalysts in each application are also commented.

Caffeine derived graphene-wrapped Fe3C nanoparticles entrapped in hierarchically porous FeNC nanosheets for boosting oxygen reduction reaction

It is a vital requirement to explore high-efficiency and stable electrocatalysts for oxygen reduction reaction (ORR) to further relieve energy depletion. However, it is a critical challenge to develop low cost and high-quality carbon-based catalysts. Herein, a caffeine chelation-triggered pyrolysis approach was developed to construct graphene-wrapped Fe₃C nanoparticles incorporated in hierarchically porous FeNC nanosheets (G-Fe₃C/FeNC). The present Fe salt and its content as well as the pyrolysis temperature were carefully investigated in the control groups. The G-Fe₃C/FeNC catalyst showed a more positive onset potential (E_onset = 1.09 V) and half-wave potential (E_1/2 = 0.88 V) in a 0.1 M KOH solution, which outperformed commercial Pt/C (E_1/2 = 0.83 V, E_onset = 0.95 V), showing the excellent catalytic performance for the ORR activity, coupled with remarkable stability (only 0.18 mV negative shift in E_1/2 after 2000 cycles). This work provides some valuable insights for developing advanced electrocatalysts for energy storage and conversion related research.

Surface-Specific Modification of Graphitic Carbon Nitride by Plasma for Enhanced Durability and Selectivity of Photocatalytic CO2 Reduction with a Supramolecular Photocatalyst

Photocatalytic CO₂ reduction is in high demand for sustainable energy management. Hybrid photocatalysts combining semiconductors with supramolecular photocatalysts represent a powerful strategy for constructing visible-light-driven CO₂ reduction systems with strong oxidation power. Here, we demonstrate the novel effects of plasma surface modification of graphitic carbon nitride (C₃N₄), which is an organic semiconductor, to achieve better affinity and electron transfer at the interface of a hybrid photocatalyst consisting of C₃N₄ and a Ru(II)-Ru(II) binuclear complex (RuRu'). This plasma treatment enabled the "surface-specific" introduction of oxygen functional groups via the formation of a carbon layer, which worked as active sites for adsorbing metal-complex molecules with methyl phosphonic-acid anchoring groups onto the plasma-modified surface of C₃N₄. Upon photocatalytic CO₂ reduction with the hybrid under visible-light irradiation, the plasma-surface-modified C₃N₄ with RuRu' enhanced the durability of HCOOH production by three times compared to that achieved when using a nonmodified system. The high selectivity of HCOOH production against byproduct evolution (H₂ and CO) was improved, and the turnover number of HCOOH production based on the RuRu' used reached 50 000, which is the highest among the metal-complex/semiconductor hybrid systems reported thus far. The improved activity is mainly attributed to the promotion of electron transfer from C₃N₄ to RuRu' under light irradiation via the accumulation of electrons trapped in deep defect sites on the plasma-modified surface of C₃N₄.

Atomic Plasma Grafting: Precise Control of Functional Groups on Ti3C2Tx MXene for Room Temperature Gas Sensors

Gas sensing properties of two-dimensional (2D) materials are derived from charge transfer between the analyte and surface functional groups. However, for sensing films consisting of 2D Ti₃C₂T_x MXene nanosheets, the precise control of surface functional groups for achieving optimal gas sensing performance and the associate mechanism are still far from well understood. Herein, we present a functional group engineering strategy based on plasma exposure for optimizing the gas sensing performance of Ti₃C₂T_x MXene. For performance assessment and sensing mechanism elucidation, we synthesize few-layered Ti₃C₂T_x MXene through liquid exfoliation and then graft functional groups via in situ plasma treatment. Functionalized Ti₃C₂T_x MXene with large amounts of -O functional groups shows NO₂ sensing properties that are unprecedented among MXene-based gas sensors. Density functional theory (DFT) calculations reveal that -O functional groups are associated with increased NO₂ adsorption energy, thereby enhancing charge transport. The -O functionalized Ti₃C₂T_x sensor shows a record-breaking response of 13.8% toward 10 ppm NO₂, good selectivity, and long-term stability at room temperature. The proposed technique is also capable of improving selectivity, a well-known challenge in chemoresistive gas sensing. This work paves the way to the possibility of using plasma grafting for precise functionalization of MXene surfaces toward practical realization of electronic devices.

Ligand vacancy channels in pillared inorganic-organic hybrids for electrocatalytic organic oxidation with enzyme-like activities

Simultaneously achieving abundant and well-defined active sites with high selectivity has been one of the ultimate goals for heterogeneous catalysis. Herein, we construct a class of Ni hydroxychloride-based inorganic-organic hybrid electrocatalysts with the inorganic Ni hydroxychloride chains pillared by the bidentate N-N ligands. The precise evacuation of N-N ligands under ultrahigh-vacuum forms ligand vacancies while partially retaining some ligands as structural pillars. The high density of ligand vacancies forms the active vacancy channel with abundant and highly-accessible undercoordinated Ni sites, exhibiting 5-25 fold and 20-400 fold activity enhancement compared to the hybrid pre-catalyst and standard β-Ni(OH)₂ for the electrochemical oxidation of 25 different organic substrates, respectively. The tunable N-N ligand can also tailor the sizes of the vacancy channels to significantly impact the substrate configuration leading to unprecedented substrate-dependent reactivities on hydroxide/oxide catalysts. This approach bridges heterogenous and homogeneous catalysis for creating efficient and functional catalysis with enzyme-like properties.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Combining non-thermal plasma technology with photocatalysis: a critical review

Due to the excellent application prospects in the fields of new energy generation and environmental remediation, photocatalysis technology has attracted the increasing attention of researchers. Although significant progress has been made in the past decades, the practical application of this technology is still restricted by the moderate catalytic efficiency. To improve the performance of catalysts, new methods are extremely required for the controllable synthesis of high-efficiency catalysts. To further comprehend the relationship between material structure and catalytic activity, the surface active sites of catalysts should be regulated at the atomic and molecular levels. As the fourth state of matter, plasma can generate diverse active species with low energy consumption. As a subset of plasmas, non-thermal plasma (NTP), defined by the great temperature difference between ions (near room temperature) and electrons (usually hotter than 2 orders of magnitude), contributes to the rapid synthesis of functional nanomaterials under relatively mild conditions. Furthermore, NTP has been widely used for the surface modification of materials. Therefore, the combination of NTP and photocatalysis is expected to provide an ideal approach to synthesize high-performance catalysts and precisely customize their surface structures, which is becoming a new direction in the field of catalysis research. This paper fundamentally reviews the progress in the combination of NTP with photocatalysis for versatile applications. Beginning with the principles of photocatalysis and plasma technology, the application of NTP for catalyst synthesis, the plasma-assisted modification of surface actives sites, and the impact of plasma-involved processes on the catalytic performance are discussed, which will provide useful insights into the performance enhancement of catalysts via plasma-assisted processes.

Regulation of defects and nitrogen species on carbon nanotube by plasma-etching for peroxymonosulfate activation: Inducing non-radical/radical oxidation of organic contaminants

The structural defects and heteroatom dopants of carbonaceous materials play critical roles in their activation of peroxymonosulfate (PMS) for organic pollutants' removal. This study uses plasma-etching technology to control the levels of structural defects and nitrogen species in nitrogen-doped carbon nanotubes (N-CNTs) for excellent PMS activation. The vacancy defects, CO, pyrrolic N and graphitic N could be rationally designed by controlling the plasma-etching time. Obviously, the I_D/I_G (from 0.56 to 0.94) and CO contents (from 0.07 to 0.44 at%) of N-CNTs increase with rising etching time, exhibiting good linear positive correlations with phenol oxidation rates. Furthermore, through active species identification, quantitative structure-activity relationships analysis and theoretical calculations, vacancy defects (adsorbing PMS O1 site) and CO are confirmed to be the active sites for the generation of ¹O₂, which is major pathway (82%) for phenol degradation. While radicals induced by pyrrolic N and graphitic N adsorbing PMS O2 site are the minor pathway (18%). Overall, this study sheds new light on the crucial roles of defects and N species in inducing PMS non-radical/radical activation by carbocatalyst via efficiently controlled plasma-etching technology.

Engineering the Near-Surface Structure of WO3 by an Amorphous Layer with Trivalent Ni and Self-Adapting Oxygen Vacancies for Efficient Photocatalytic and Photoelectrochemical Acidic Oxygen Evolution Reaction

Exploiting an effective strategy to tailor the construction, composition, and local electronic structure of the photocatalyst surface is pivotal to photocatalytic activity, but remains challenging. Transition metal elements can boost the oxygen evolution reaction activity especially one like Ni in high oxidation states, whereas it is uneasy to prepare Ni³⁺ under mild conditions or play to their strengths in acidic conditions. In this article, we report a facile "etch and dope" synthesis of Ni³⁺-doped WO₃ nanosheets with oxygen vacancies. Through detailed experimental and theoretical studies, it is established that the abundant oxygen vacancies and the doped Ni³⁺ ions in the near-surface amorphous layer can synergistically optimize the surface electronic structure of WO₃ and the adsorption and desorption of intermediates. Impressively, the etched WO₃ nanosheets coupled with Ni³⁺ offer a greatly promoted photocatalytic performance of 1.78 mmol g^-1 h^-1, and the photoanode achieves a photocurrent density of 2.11 mA cm^-2 at 1.23 V versus reversible hydrogen electrode (V_RHE). This work provides a new inspiration for rational manufacture of defects and high-valence metal ions in catalysts for photocatalytic and photoelectrochemical reactions.

Potassium-Assisted Fabrication of Intrinsic Defects in Porous Carbons for Electrocatalytic CO2 Reduction

The fabrication of intrinsic carbon defects is usually tangled with doping effects, and the identification of their unique roles in catalysis remains a tough task. Herein, a K⁺ -assisted synthetic strategy is developed to afford porous carbon (K-defect-C) with abundant intrinsic defects and complete elimination of heteroatom via direct pyrolysis of K⁺ -confined metal-organic frameworks (MOFs). Positron-annihilation lifetime spectroscopy, X-ray absorption fine structure measurement, and scanning transmission electron microscopy jointly illustrate the existence of abundant 12-vacancy-type carbon defects (V₁₂ ) in K-defect-C. Remarkably, the K-defect-C achieves ultrahigh CO Faradaic efficiency (99%) at -0.45 V in CO₂ electroreduction, far surpassing MOF-derived carbon without K⁺ etching. Theoretical calculations reveal that the V₁₂ defects in K-defect-C favor CO₂ adsorption and significantly accelerate the formation of the rate-determining COOH* intermediate, thereby promoting CO₂ reduction. This work develops a novel strategy to generate intrinsic carbon defects and provides new insights into their critical role in catalysis.

Boosting Hydrogen Evolution Reaction Activity of Amorphous Molybdenum Sulfide Under High Currents Via Preferential Electron Filling Induced by Tungsten Doping

The lack of highly efficient, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) working at high current densities poses a significant challenge for the large-scale implementation of hydrogen production from renewable energy. Herein, amorphous molybdenum tungsten sulfide/nitrogen-doped reduced graphene oxide nanocomposites (a-MoWS_x /N-RGO) are synthesized by plasma treatment for use as high-performance HER catalysts. By adjusting the plasma treatment duration and chemical composition, an optimal a-MoWS_x /N-RGO catalyst is obtained, which exhibits a low overpotential of 348 mV at a current density of 1000 mA cm^-2 and almost no decay after 24 h of working at this current density, outperforming commercial platinum/carbon (Pt/C) and previously reported heteroatom-doped MoS₂ -based catalysts. Based on density functional theory (DFT) calculations, it is found that with a reasonable tungsten doping level, the catalytic active site (2S^{2 -} ) shows excellent catalytic performance working at high current densities because extra electrons preferentially fill at 2S^{2 -} . The introduction of tungsten tends to lower the electronic structure energy, resulting in a closer-to-zero positive Δ G H ∗ $\Delta {G}_{{{\rm{H}}}^{\rm{*}}}$ . Excessive tungsten introduction, however, can lead to structural damage and a worse HER performance under high current densities. The work provides a route towards rationally designing high-performance catalysts for the HER at industrial-level currents using earth-abundant elements.