Tuning the Photoinduced Electron Transfer in a Zr-MOF: Toward Solid-State Fluorescent Molecular Switch and Turn-On Sensor

Synthesis of a metal-organic framework Cu-Mi-UiO-66-based fluorescent nanoprobe for the simultaneous sensing and intracellular imaging of GSH and ATP

This study reports a fluorescent nanoprobe operated in fluorescence turn-on mode for simultaneously sensing and imaging intracellular GSH and ATP. By using maleimide-derivatives as the ligand, the bimetallic nanoscale metal-organic framework (NMOF) Cu-Mi-UiO-66 has been synthesized for the first time using a straightforward one-step solvothermal approach, serving as a GSH recognition moiety. Subsequently, a Cy5-labeled ATP aptamer was assembled onto Cu-Mi-UiO-66 via strong coordination between phosphate and zirconium, π-π stacking and electrostatic adsorption to develop the dual-responsive fluorescence nanoprobe Cu-Mi-UiO-66/aptamer. Due to the photoinduced electron transfer (PET) effect between maleimide groups and the benzene ring of the ligand and the charge transfer between Cy5 and the Zr(IV)/Cu(II) bimetal center of the NMOF, the Cu-Mi-UiO-66/aptamer exhibits a fluorescence turn-off status. The Michael addition reaction between the thiol group of GSH and the maleimide on the NMOF skeleton results in turning on of the blue fluorescence of Cu-Mi-UiO-66. Meanwhile, upon specific interaction with ATP, the aptamer changes into internal loop structures and detaches from Cu-Mi-UiO-66, resulting in turning on of the red fluorescence of Cy5. The nanoprobe demonstrated an excellent sensing performance with a good linear range (GSH, 5.0-450.0 μM; ATP, 1.0-50.0 μM) and a low detection limit (GSH, 2.17 μM; ATP, 0.635 μM). More importantly, the Cu-Mi-UiO-66/aptamer exhibits good performance for tracing intracellular concentration variations of GSH and ATP in living HepG2 cells under different stimulations. This study highlights the potential of NMOFs for multiplexed analysis and provides a valuable tool for tumor microenvironment research and early cancer diagnosis.

Recent Advances in Pristine Iron Triad Metal-Organic Framework Cathodes for Alkali Metal-Ion Batteries

Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.

Time-Resolved Spectroscopy for Dynamic Investigation of Photoresponsive Metal-Organic Frameworks

Photoresponsive MOFs with precise and adjustable reticular structures are attractive for light conversion applications. Uncovering the photoinduced carrier dynamics lays the essential foundation for the further development and optimization of the MOF material. With the application of time-resolved spectroscopy, photophysical processes including excimer formation, energy transfer/migration, and charge transfer/separation have been widely investigated. However, the identification of distinct photophysical processes in real experimental MOF spectra still remains difficult due to the spectral and dynamic complexity of MOFs. In this Perspective, we summarize the typical spectral features of these photophysical processes and the related analysis methods for dynamic studies performed by time-resolved photoluminescence (TR-PL) and transient absorption (TA) spectroscopy. Based on the recent understanding of excited-state properties of photoresponsive MOFs and the discussion of challenges and future outlooks, this Perspective aims to provide convenience for MOF kinetic analysis and contribute to the further development of photoresponsive MOF material.

Dual-emissive Eu(III)-functionalized metal-organic frameworks for visual, rapid, and intelligent sensing of albendazole and albendazole sulfoxide in animal-origin food

Albendazole (ABZ), a benzimidazole-based anthelmintic, is widely used to treat helminth infections. The extensive and improper use of ABZ may cause drug residues in animal-origin food and anthelmintics resistance, which potentially threaten human health. Meanwhile, albendazole sulfoxide (ABZSO), a metabolite of ABZ, also exhibits toxic effects. Therefore, the detection of ABZ and ABZSO in animal-derived food is significantly necessary. Herein, a dual-emission europium fluorescent sensor (EuUHC-30) was rationally designed and constructed. EuUHC-30 exhibits high selectivity and sensitivity towards ABZ and ABZSO with a detection limit of 0.10 and 0.13 μM, respectively. Furthermore, EuUHC-30 was successfully applied for quantification of ABZ and ABZSO in milk and pig kidney, which were verified by HPLC analysis. Moreover, a smartphone-assisted EuUHC-30 fluorescent paper sensor was fabricated for the practical determination of ABZ and ABZSO in real food. Overall, this work provides a visual, rapid, and intelligent method for the detection of ABZ and ABZSO in animal-origin food.

Comprehensive Qualitative and Quantitative Colorimetric Sensing of Volatile Organic Compounds Using Monolayered Metal-Organic Framework Films

Cross-responsive chemical sensors are in high demand owing to their ability to distinguish a broad range of analytes. In this study, a vapochromic sensor array based on metal-organic frameworks (MOFs), which exhibits distinct patterns when exposed to volatile organic compounds (VOCs) and humidity, is developed. Conventional sensor arrays consist of various receptors that produce different responses. The vapochromic MOF-based sensor comprises dicopper paddlewheel clusters and dimethylamine azobenzene as binary colorimetric sensing moieties. Upon exposure to VOCs, the constructed sensor encompasses a broad spectrum of colors, ranging from green to red. Furthermore, the color of the MOF is influenced by the solvent used during the pretreatment. Consequently, monolayered MOF thin films can be adapted to multicomponent array systems by immersing the MOF in different solvents. This system provides both qualitative and quantitative sensing, generating unique color patterns corresponding to specific VOC types. Notably, the sensor successfully discriminates each of 14 common VOCs and water and accurately categorizes unknown samples. Moreover, the system undergoes reversible color changes in response to humidity, obviating the need for high-temperature regeneration steps. This novel approach offers insights into the versatile applications of MOFs by creating a colorimetric sensor array capable of detecting various analytes.

Stepwise construction of multi-component metal-organic frameworks

Multi-component metal-organic frameworks (MC-MOFs) are crystalline porous materials containing multiple organic ligands or mixed metals, which manifest new properties beyond the linear combination of the single component. However, the traditional one-pot synthesis method for MOFs is not always applicable for synthesizing MC-MOFs due to the competitive coordination of multiple ligands and metals. Therefore, the stepwise construction of MC-MOFs has been explored, which enables more precise control of the heterogeneity within the ordered MC-MOFs. This review provides a summary of the synthesis strategies, namely, ligand exchange, coordinative modification, covalent modification, ligand metalation, cluster metalation, and use of mixed-metal precursors, for the stepwise construction of MC-MOFs. Furthermore, we discuss the applications of MC-MOFs with ordered arrangements of multiple functionalities, focusing on gas adsorption and separation, water remediation, heterogeneous catalysis, luminescence, and chemical sensing.

Photo-Induced Construction and Recovery of Cu+ Sites in Metal-Organic Frameworks

The adjustment of the valence state of metal ions is crucial for various applications because peculiar activity originates from metal ions with specific valence. Cu+ can interact with molecules possessing unsaturated bonds like CO via π-complexation, while Cu2+ doesn't have such ability. Meanwhile, Cu+ sites are easily oxidized to Cu2+ , leading to the loss of activity. Despite great efforts, the development of a facile method to construct and recover Cu+ sites remains a pronounced challenge. Here, for the first time a facile photo-induced strategy is reported to fabricate Cu+ sites in metal-organic frameworks (MOFs) and recover Cu+ after oxidation. The Cu2+ precursor was loaded on NH2 -MIL-125, a typical visible-light responsive Ti-based MOF. Visible light irradiation triggers the formation of Ti3+ from Ti4+ in framework, which reduces the supported Cu2+ in the absence of any additional reducing agent, thus simplifying the process for Cu+ generation significantly. Due to π-complexation interaction, the presence of Cu+ results in remarkably enhanced CO capture capacity (1.16 mmol g-1 ) compared to NH2 -MIL-125 (0.49 mmol g-1 ). More importantly, Cu+ can be recovered conveniently via re-irradiation when it is oxidized to Cu2+ , and the oxidation-recovery process is reversible.

Two anthracene-based zirconium metal-organic frameworks with fcu and hcp topologies as versatile fluorescent sensors for detection of inorganic ions and nitroaromatics

Two anthracene-based zirconium metal-organic frameworks (UiO-68-AN-fcu and UiO-68-AN-hcp) with blue emission were synthesized by the solvothermal reaction of ZrCl₄ with anthracene-based ligand 4,4'-(9,10-anthracenediyl)dibenzoic acid. The two MOFs inherited the luminescence properties of anthracene-based ligand and exhibited different topologies due to the change of connection mode of Zr-O clusters. The two stable anthracene-based zirconium MOFs served as luminescent sensors for selectively detecting 2-nitrophenol, Fe³⁺ and Cr₂O₇^2-. UiO-68-AN-hcp with flower morphology exhibited stronger quenching effect for 2-nitrophenol, Fe³⁺ and Cr₂O₇^2- by comparing to UiO-68-AN-fcu. Adsorption tests, fluorescence lifetime and spectroscopy studies demonstrated that the fluorescence responses of MOFs for analytes can be primarily attributed to the dynamic quenching mechanism involving energy and electron transfer. These results revealed that the combination of luminescent anthracene-based ligand and Zr-O clusters is a feasible strategy to construst MOFs-based fluorescent sensors.

A novel spectroscopic technique for studying metal-organic frameworks based on Mie scattering

Metal-organic frameworks (MOFs) are promising candidates for a wide range of applications, and spectroscopic techniques are important tools for analyzing their structures and properties. Here, we propose a novel and general scattering spectroscopic approach to study various MOFs such as zeolitic imidazolate frameworks (ZIF-67 and ZIF-8), HKUST-1, Co-based MOF (Co-MOF), and Ni-based MOF (Ni-MOF) based on their inherent Mie scattering properties. We show that by using a dark-field microscope, the inherent scattering colors and spectra can be obtained, which are mainly from the high-order magnetic and electric resonant modes. The scattering capacities are dependent on the chemical structures for producing polarized charges and internal circular displacement currents. Additionally, all the MOFs are capable of responding to solvent guests due to their high porosity, and the scattering peaks are in a linear correlation with solvent refractive indices, displaying scattering solvatochromic behaviors. Our results open up a powerful and universal avenue for visually studying the host-guest interactions in MOFs.

A Dynamic Supramolecular H-bonding Network with Orthogonally Tunable Clusteroluminescence

Enabling dynamically tunable emissive systems offers opportunities for constructing smart materials. Clusteroluminescence, as unconventional luminescence, has attracted increasing attention in both fundamental and applied sciences. Herein, we report a supramolecular poly(disulfides) network with tunable clusteroluminescence. The reticular H-bonds synergize the rigidity and mobility of dynamic networks, and endow the resulting materials with mechanical adaptivity and robustness, simultaneously enabling efficient clusteroluminescence and phosphorescence at 77 K. Orthogonally tunable luminescence are achieved in two manners, i.e., slow backbone disulfide exchange and fast side-chain metal coordination. Further exploration of the reprocessability and chemical closed-loop recycling of intrinsic dynamic networks for sustainable materials is feasible. We foresee that the synergistic strategy of dynamic chemistry offers a novel pathway and potential opportunities for smart emissive materials.

Dynamic Timing Control of Molecular Photoluminescent Systems

Dynamic control of molecular photoluminescence offers chemical solutions to designing functional emissive materials. Although stimuli-switchable molecular luminescent systems are well established, how to encode these dynamic emissive systems with a "timing" feature, that is, time-dependent luminescent properties, remains challenging. This Concept aims to summarize the design principles of dynamic timing molecular photoluminescent systems by discussing the state-of-the-art of this topic and the shaping of fabrication strategies at both the molecular and supramolecular levels. An outlook and perspectives are given to outline the future opportunities and challenges in the rational design and potential applications of these smart emissive systems.

Tunable fluorescence emission based on multi-layered MOF-on-MOF

Luminescent metal-organic frameworks (MOFs) have garnered considerable attention in various fields. Herein, we proposed a hierarchical confinement strategy based on MOF-on-MOF to tune luminescence emission ranging from blue to red including white light in a flexible way. The easily available ZIF-8 MOF was used as a host for the confinement of two kinds of size-matching dyes (perylene and rhodamine B) to obtain a layered ZIF-8@dye@ZIF-8@dye via in situ encapsulation and seed-mediated synthesis. ZIF-8@dye@ZIF-8@dye materials with different fluorescence emission in dispersed and solid states were both obtained by tuning the initial encapsulation concentration of dye and changing the structure of the inner and outer ZIF-8@dye layers. To our delight, ZIF-8@0.125perylene@ZIF-8@25RhB with white light emission in the dispersed state was obtained; meanwhile, ZIF-8@0.125perylene + 25RhB and mechanically mixed ZIF-8@0.125perylene + ZIF-8@25RhB could not realize white light emission under the same conditions, indicating that the proposed hierarchical confinement strategy facilitated white light regulation. Similarly, the emission of ZIF-8@dye@ZIF-8@dye in the solid state has also been investigated; ZIF-8@perylene@ZIF-8@3RhB with white light emission was obtained, while white light emission could not be achieved in ZIF-8@perylene + 3RhB and ZIF-8@perylene + ZIF-8@3RhB, which further indicated the importance of the hierarchical confinement strategy based on MOF-on-MOF. The proposed hierarchical confinement strategy may also inspire the development of other functional optical MOF materials.

Subtle Ligand Spacer Change in 2D Metal-Organic Framework Sheets for Dual Turn-On/Turn-Off Sensing of Acetylacetone and Turn-On Sensing of Water in Organic Solvents

Metal-organic framework (MOF)-based sensors for the detection of various analyte molecules has been a subject of absolute importance. However, most of these sensors rely on the turn-off (quenching) transduction response, while those reporting turn-on response are very rare. In this article, we have synthesized two new MOF-based sensors, {[Zn₂(oxdz)₂(tpbn)]·14H₂O}_n (1) and {[Zn₂(oxdz)₂(tpxn)]·10H₂O·2C₂H₅OH}_n (2), via the self-assembly of Zn(II) metal ions, a fluorogenic oxdz^2- linker, and bis(tridentate) ligands (tpbn and tpxn) under ambient conditions. Their formation from such a self-assembly process has been evaluated on the basis of the geometry around the five-coordinated Zn(II), preferential meridional binding of the bis(tridentate) ligands, and diverse binding of the carboxylate groups in oxdz^2-. Although 1 and 2 are isostructural, a difference in the transduction mechanism for the sensing of acetylacetone in organic solvents (turn-on for 1 and turn-off for 2) is observed and can be attributed to the spacer in the bis(tridentate) ligands. We have demonstrated the competing effect of the nonradiative interactions and photoinduced electron transfer toward the sensing mechanism. The results are well-supported by the Fourier transform infrared spectroscopy study, intensity versus concentration plots, spectral overlap measurements, time-resolved fluorescence studies, and MM2 and density functional theory calculations. Furthermore, we have showcased the utilization of 1 for the sensing of trace amounts of water in organic solvents.

Molecular engineering of fluorescent bichromophore 1,3,5-triaryl-Δ2-pyrazoline and 4-amino-1,8-naphthalimide molecular logic gates

Emissive bichromophoric solvatochromatic molecules are introduced as a new platform for the development of fluorescent molecular logic gates.

Conjugating aldoxorubicin to supramolecular organic frameworks: polymeric prodrugs with enhanced therapeutic efficacy and safety

Phase I-III clinical studies show that aldoxorubicin (AlDox), a prodrug of doxorubicin (Dox), displays superior cardiotocity over Dox, but does not demonstrate a survival benefit in the entire patients. Here...

Non-volatile ternary memristors based on a polymer containing a carbazole donor with CuO NPs embedded

A D–A-type polymer PCz–BMBI was synthesized and non-volatile ternary memory devices of ITO/PCz–BMBI:CuO/Al were fabricated with an ON2/ON1/OFF ratio of 105.3 : 102.3 : 1.

Metal–organic frameworks (MOFs) as fluorescence sensors: principles, development and prospects

This review classifies the latest developments of MOF-based fluorescence sensors according to the analytes, and discusses the challenges faced by MOF-based fluorescence sensors and promotes some directions for future research.

A novel 2D metal–organic framework probe: a highly sensitive and visual fluorescent sensor for Al3+, Cr3+ and Fe3+ ions

A novel 2D MOF Tb-DBA was constructed. Tb-DBA could detect Al3+, Cr3+ and Fe3+ ions rapidly, sensitively, selectively, reversibly and visually. Tb-DBA represents a promising material for the quick detection of metal ions in aqueous solution.

Stable dual-emissive fluorescin@UiO-67 metal-organic frameworks for visual and ratiometric sensing of Al3+ and ascorbic acid

Encapsulation of fluorophore in metal organic framework (MOF) is an effective method to construct multi-emissive composites. Unfortunately, the small molecules loaded in MOF pores are easy to leak. To overcome this difficulty, fluorescin (FL) is proposed to be encapsulated tightly in the cage of the small tetrahedron of UiO-67, as one of the organic ligands coordinated with the central ion Zr. Finally, stable multi-emission fluorescence was successfully achieved, and Förster resonance energy transfer (FRET) occurred between FL and UiO-67. Ascorbic acid (AA) can dynamically quench the fluorescence of FL@UiO-67 nanoclusters (NCs) through internal filtering effect, photoinduced electron transfer (PET). The detection limit of the probe for AA was as low as 0.20 μM, and the detection range was 0.67 μM-0.36 mM. The probe was further employed to detect Al³⁺ due to the coordination between Al³⁺ and the carboxyl group in the FL@UiO-67 NCs. The detection limit for Al³⁺ was 3.3 nM, and the linear range was 11 nM-5 μM agarose film and test paper were both prepared successfully for visual detection of AA and Al³⁺. This work provides new ideas for low-cost and convenient real-time detection method.

Group 4 Metal-Based Metal—Organic Frameworks for Chemical Sensors

Metal-organic frameworks (MOFs) have attracted great attention for their applications in chemical sensors mainly due to their high porosity resulting in high density of spatially accessible active sites, which can interact with the aimed analyte. Among various MOFs, frameworks constructed from group 4 metal-based (e.g., zirconium, titanium, hafnium, and cerium) MOFs, have become especially of interest for the sensors requiring the operations in aqueous media owing to their remarkable chemical stability in water. Research efforts have been made to utilize these group 4 metal-based MOFs in chemosensors such as luminescent sensors, colorimetric sensors, electrochemical sensors, and resistive sensors for a range of analytes since 2013. Though several studies in this subfield have been published especially over the past 3–5 years, some challenges and concerns are still there and sometimes they might be overlooked. In this review, we aim to highlight the recent progress in the use of group 4 metal-based MOFs in chemical sensors, and focus on the challenges, potential concerns, and opportunities in future studies regarding the developments of such chemically robust MOFs for sensing applications.

Neutral Nitrogen Donor Ligand-based MOFs for Sensing Applications

Neutral nitrogen donor (N-donor) ligand-based MOFs, with their enticing features inclusive of facile synthesis, labile metal-ligand bond, framework flexibility, atomic level tunability renders them appealing in molecular recognition-based studies. Intriguingly, the flexibility in such systems (owing to weaker metal-nitrogen bonds) promote maximization of host-analyte interactions, which is critical for the manifestation of a signaling response. Such host-analyte interactions can be tapped by discerning any change in the physical properties associated with the system, such as optical, fluorometric, chemiresistive, magnetic, dielectric constant, mass. This minireview presents a brief discussion on the various types of signal transduction pathways unveiled hitherto using neutral N-donor ligand-based MOFs and the fundamental insight into the signal's origin. Moreover, an elaborate compilation of the recent examples in this field has been presented. Also, the untapped prospects have been highlighted, which may serve as a beacon to drive future research.

Construction of Stable Helical Metal-Organic Frameworks with a Conformationally Rigid "Concave Ligand"

A helical metal-organic framework was prepared by using a conformationally rigid tetratopic benzoic acid ligand with binding units pointing toward each other (concave ligand). To avoid the obvious intramolecular interactions between binding units, matching spacing groups were applied to introduce atropic repulsion, thereby allowing the formation of extended frameworks for the first time. With this new ligand design, a helical-shaped MOF with significantly improved air and moisture stability was successfully prepared, thus providing a new strategy for ligand design toward porous material constructions.

Ultrastable Tb-Organic Framework as a Selective Sensor of Phenylglyoxylic Acid in Urine

Industrial pollution and harmful chemicals seriously affect environment and human health. Styrene is a common air toxicant with widespread exposure sources, including smoking, automobile exhaust, and plastic pollutants. Phenylglyoxylic acid (PGA) is a typical biomarker for exposed styrene. Therefore, it is crucial to quickly identify and quantitatively detect PGA. Herein, an ultrastable terbium metal-organic framework (Tb-MOF 1) was developed, and the luminescence film (1/PLA) consisting of polylactic acid (PLA) and 1 was fabricated as a sensor for rapid detection of PGA. The sensor possesses the advantages of efficient detection [limit of detection (LOD) is 1.05 × 10^-4 mg/mL] and rapid response speed (less than 10 s) for PGA in urine. Furthermore, this sensor exhibits high stability, outstanding anti-interference ability, and excellent recyclability. Based on this film technology, a paper-based probe was then developed for portable and convenient detection. The probe could easily distinguish different concentrations of PGA under the naked eye toward practical sensing applications. Meanwhile, photoinduced electron transfer was demonstrated to be responsible for the luminescence sensing. Hence, this study indicates that Tb-MOF is a promising material to detect PGA for evaluating the effect of styrene on the body.

Linker Engineering toward Full-Color Emission of UiO-68 Type Metal-Organic Frameworks

Luminescent metal-organic frameworks (LMOFs) demonstrate strong potential for a broad range of applications due to their tunable compositions and structures. However, the methodical control of the LMOF emission properties remains a great challenge. Herein, we show that linker engineering is a powerful method for systematically tuning the emission behavior of UiO-68 type metal-organic frameworks (MOFs) to achieve full-color emission, using 2,1,3-benzothiadiazole and its derivative-based dicarboxylic acids as luminescent linkers. To address the fluorescence self-quenching issue caused by densely packed linkers in some of the resultant UiO-68 type MOF structures, we apply a mixed-linker strategy by introducing nonfluorescent linkers to diminish the self-quenching effect. Steady-state and time-resolved photoluminescence (PL) experiments reveal that aggregation-caused quenching can indeed be effectively reduced as a result of decreasing the concentration of emissive linkers, thereby leading to significantly enhanced quantum yield and increased lifetime.

A Review of Off-On Fluorescent Nanoprobes: Mechanisms, Properties, and Applications

With the development of nanomaterials, fluorescent nanoprobes have attracted enormous attention in the fields of chemical sensing, optical materials, and biological detection. In this paper, the advantages of "off-on" fluorescent nanoprobes in disease detection, such as high sensitivity and short response time, are attentively highlighted. The characteristics, sensing mechanisms, and classifications of disease-related target substances, along with applications of these nanoprobes in cancer diagnosis and therapy are summarized systematically. In addition, the prospects of "off-on" fluorescent nanoprobe in disease detection are predicted. In this review, we presented information from all the papers published in the last 5 years discussing "off-on" fluorescent nanoprobes. This review was written in the hopes of being useful to researchers who are interested in further developing fluorescent nanoprobes. The characteristics of these nanoprobes are explained systematically, and data references and supports for biological analysis, clinical drug improvement, and disease detection have been provided appropriately.

A New Molecular Recognition Concept: Multiple Hydrogen Bonds and Their Optically Triggered Proton Transfer in Confined Metal-Organic Frameworks for Superior Sensing Element

We report a new sensing mechanism based on an indium-dihydroxyterephthalic acid metal-organic framework (MOF, SNNU-153), in which the spatially fitted analyte-MOF hydrogen-bond (H-bond) formation provides selective recognition while the analyte-H-bond assisted excited-state intramolecular proton transfer (ESIPT) and the resulting ratiometric emission act as a superior signal transducer with ultrafast response. The synergy of ESIPT signal transduction and confined MOF pore enables the SNNU-153 sensor selectively sensing hydrazine even among nitrogen-containing hydride analogs such as NH₃, NH₂OH, and (Me)₂NNH₂. The key of H-bond and associated ESIPT was further counter evidenced by an indium-2,5-dimethoxyterephthalic acid MOF (SNNU-152), where the hydroxyl protons were removed by methylation, showing near inertness to N₂H₄. The new molecular recognition concept thus makes SNNU-153 a powerful N₂H₄ sensor, which should be far-reaching to other sensing elements.

What Lies beneath a Metal-Organic Framework Crystal Structure? New Design Principles from Unexpected Behaviors

The rational design principles established for metal-organic frameworks (MOFs) allow clear structure-property relationships, fueling expansive growth for energy storage and conversion, catalysis, and beyond. However, these design principles are based on the assumption of compositional and structural rigidity, as measured crystallographically. Such idealization of MOF structures overlooks subtle chemical aspects that can lead to departures from structure-based chemical intuition. In this Perspective, we identify unexpected behavior of MOFs through literature examples. Based on this analysis, we conclude that departures from ideality are not uncommon. Whereas linker topology and metal coordination geometry are useful starting points for understanding MOF properties, we anticipate that deviations from the idealized crystal representation will be necessary to explain important and unexpected behaviors. Although this realization reinforces the notion that MOFs are highly complex materials, it should also stimulate a broader reexamination of the literature to identify corollaries to existing design rules and reveal new structure-property relationships.

Lysosome targeting metal-organic framework probe LysFP@ZIF-8 for highly sensitive quantification of carboxylesterase 1 and organophosphates in living cells

Herein, a lysosomal targeting LysFP@ZIF-8 metal-organic framework (MOF) was fabricated using fluorescent protein chromophore-based probe (LysFP) for selectively detection of carboxylesterase 1 (CES1) in living cells. Unlike the regular small molecule fluorescent probes, LysFP@ZIF-8 showed wide range pH tolerabiligy, high selectivity and sensitivity to CES1 in bio-samples, and was successfully applied to achieve the visual monitoring of CES1 activity in living cells. Low detection limit and high fluorescence quantum yield was calculated as 79 ng/mL and 0.76 for LysFP@ZIF-8, respectively. Furthermore, LysFP@ZIF-8 can also serve as a fluorescence indicator of organophosphates pesticide exposure in the way of hydrolyzing the carboxylic acid ester group in LysFP. This type of probe can inspire the development of fluorescent tools for further explore many pathological processes.

Stimuli -triggered fluoro-switching in metal-organic frameworks: applications and outlook

The design and synthesis of efficient sensor materials with fast-responsive and ultrasensitive detection ability is critical to monitor ecological safety, supervise human health, control industrial wastes, and govern food quality among others. Metal-organic frameworks (MOFs) or coordination polymers (CPs) are a new class of porous crystalline materials that have emerged in several potential applications in last two decades. In particular, applications of MOFs as sensory scaffolds for the detection of hazardous pollutants have attracted researchers due to their fabulous structural characteristics and wide range of pore environment tunability. Among several transducer procedures, the luminescence detection of a particular analyte is immensely desirable as it is easy to handle and cost effective, where visual changes in physicochemical attributes can be comprehended via a quick naked eye detection. The porous nature of MOFs facilitates the pre-concentration of target analytes within the pore structure and provides superior host-guest interaction with good detection limits when compared to conventional materials. To this end, guest-induced fluorescence switching in sensory MOFs with good recyclability and unique detectable fingerprints are of particular importance to benefit futuristic monitoring aptitudes and promises environmental remediation. In this review, we present the latest literature based on the analyte-responsive modulation of fluorescence intensity in MOFs towards the detection of target pollutants and discuss the underlying sensing mechanism, which can assist in developing new useful nano-scale devices and sensors.

Reversible Diels-Alder and Michael Addition Reactions Enable the Facile Postsynthetic Modification of Metal-Organic Frameworks

Functionalization of metal-organic frameworks (MOFs) is critical in exploring their structural and chemical diversity for numerous potential applications. Herein, we report multiple approaches for the tandem postsynthetic modification (PSM) of various MOFs derived from Zr(IV), Al(III), and Zn(II). Our current work is based on our efforts to develop a wide range of MOF platforms with a dynamic functional nature that can be chemically switched via thermally triggered reversible Diels-Alder (DA) and hetero-Diels-Alder (HDA) ligations. Furan-tagged MOFs (furan-UiO-66-Zr) were conjugated with maleimide groups bearing dienophiles to prepare MOFs with a chemically switchable nature. As HDA pairs, phosphoryl dithioester-based moieties and cyclopentadiene (Cp)-grafted MOF (Cp-MIL-53-Al) were utilized to demonstrate the cleavage and rebonding of the linkages as a function of temperature. In addition to these strategies, the Michael addition reaction was also applied for the tandem PSM of IRMOF-3-Zn. Maleimide groups were postsynthetically introduced in the MOF lattice, which were further ligated with cysteine-based biomolecules via the thiol-maleimide Michael addition reaction. On the basis of the versatility of the herein presented chemistry, we expect that these approaches will help in designing a variety of sophisticated functional MOF materials addressing diverse applications.

Cu-MOF Material Constructed with a Triazine Polycarboxylate Skeleton: Multifunctional Identify and Microdetecting of the Aromatic Diamine Family (o,m,p-Phenylenediamine) Based on the Luminescent Response

Organic aromatic amines are widely used in various fields such as pharmaceuticals, pesticides, dyes, and tobacco smoke. The pollution of organic amines has become a problem that cannot be ignored, due to the extensive harmful effects on the environment and public health, which has become one of the most concerned frontier fields in the world. Identifying and microdetecting o-phenylenediamine (OPD), m-phenylenediamine (MPD), and p-phenylenediamine (PPD) using MOFs have rarely been reported. On the basis of the blue emission properties of Cu-TBDA constructed with 5,5'-((6-chloro-1,3,5-triazine-2,4-diyl)bis(azanediyl))diisophthalic acid (H₄TBDA) ligand, Cu-TBDA was studied primarily to identify and detect aromatic diamine family as a multifunctional chemical sensor. Interestingly, Cu-TBDA has a very high selectivity and sensitivity to OPD and MPD with a low limit of detection (5.00 μM for OPD and 1.77 μM for MPD). Especially for OPD, Cu-TBDA has a unique switching function for it. When the concentration of OPD is less than 9.1 × 10^-4 M, the fluorescence response of Cu-TBDA suspension exhibit enhanced. However, when the concentration of OPD is more than 9.1 × 10^-4 M, the emission intensity displays quenching phenomenon. Therefore, Cu-TBDA as a chemical sensor not only has recognition and detection functions for organic aromatic amines but also first exhibits turn-on and -off sensing behavior toward OPD.

Tuning the Conduction Band Potential of Bi-based Semiconductors Using a Combination of Organic Ligands

Most Bi-based semiconductors are incapable of photocatalytic reduction reaction from a thermodynamic view, owing to relatively positive conduction band potentials (E_CB ). Here, a novel Bi-based metal-organic framework (Bi-MBA, MBA=4-mercaptobenzoic acid) with excellent photocatalytic reduction activities is developed. The E_CB of Bi-MBA locates at -1.38 eV, which is able to efficiently reduce O₂ , Cr^VI and CO₂ . Theoretical calculations reveal the significant contribution of organic ligand (MBA) to the conduction band. Our results provide an effective route to improve the photocatalytic reduction activities of Bi-based photocatalysts.

Metal-Organic Frameworks Based on Group 3 and 4 Metals

Metal-organic frameworks (MOFs) based on group 3 and 4 metals are considered as the most promising MOFs for varying practical applications including water adsorption, carbon conversion, and biomedical applications. The relatively strong coordination bonds and versatile coordination modes within these MOFs endow the framework with high chemical stability, diverse structures and topologies, and interesting properties and functions. Herein, the significant progress made on this series of MOFs since 2018 is summarized and an update on the current status and future trends on the structural design of robust MOFs with high connectivity is provided. Cluster chemistry involving Y, lanthanides (Ln, from La to Lu), actinides (An, from Ac to Lr), Ti, and Zr is initially introduced. This is followed by a review of recently developed MOFs based on group 3 and 4 metals with their structures discussed based on the types of inorganic or organic building blocks. The novel properties and arising applications of these MOFs in catalysis, adsorption and separation, delivery, and sensing are highlighted. Overall, this review is expected to provide a timely summary on MOFs based on group 3 and 4 metals, which shall guide the future discovery and development of stable and functional MOFs for practical applications.

Stimuli-Responsive Luminescent Properties of Tetraphenylethene-Based Strontium and Cobalt Metal-Organic Frameworks

Herein we report two new TPE-based 3D MOFs, that is, Sr-ETTB and Co-ETTB (TPE=Tetraphenylethylene, H₈ ETTB=4',4''',4''''',4'''''''-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'-biphenyl]-3,5-dicarboxylic acid))). Through tailoring outer shell electron configurations of Sr^II and Co^II cations, the fluorescence intensity of the MOFs is tuned from high emission to complete non-emission. Sr-ETTB with strong blue fluorescence shows reversible fluorescence variations in response to pressure and temperature, which is directly related to the reversible deformation of the crystal structure. In addition, non-emissive Co-ETTB counterpart exhibits a turn-on fluorescent enhancement under the stimulation of analyte histidine. In the process, TPE-cored linkers in the MOFs are released through competitive coordination substitution and subsequently reassembled to perform aggregation-induced luminescence behavior originated from the organic linkers.

Postmodified Dual Functional UiO Sensor for Selective Detection of Ozone and Tandemly Derived Sensing of Al3

Development of highly sensitive and selective fluorescent sensors toward hazardous analytes represents great progress in fabricating sensing devices for practical applications. In this work, a highly selective sensor with dual functions has been fabricated via facile postmodification of the UiO-MOF. Butene modified salicylaldehyde is covalently linked to the UiO-66 scaffold via an efficient Schiff-base reaction, resulting in a highly fluorescent ozone sensor of UiO-66-butene. Ozonolysis of the terminal olefin followed by β-elimination could significantly quench the bright blue fluorescence of UiO-66-butene, and linear turn-off detection of ozone in the range of 0-100 μM is well established. The detection is highly sensitive and selective, and a detection limit of 73 nM was calculated. Remarkably, the ozonolysis afforded product could further act as a selective sensor for Al³⁺ via turn-on fluorescence with a detection limit of 142 nM, representing a second potential sensing function. The chemically selective sequential ozonolysis/β-elimination and remarkable dual functions offer the exclusive detection of ozone over other oxidative species as well as Al³⁺ over other cations following a tandem process, representing the first example of a direct MOF sensor for dual sensing of ozone and Al³⁺. This work demonstrates the potential of employing combinatorial principles for fabricating highly selective sensors, and postmodification of MOFs represents a promising facile strategy for developing various functional sensors.

"Two Birds with One Stone" Ruthenium(II) Complex Probe for Biothiols Discrimination and Detection In Vitro and In Vivo

In this work, a "two birds with one stone" ruthenium(II) complex probe, Ru-NBD, is proposed as an effective tool for biothiols detection and discrimination in vitro and in vivo. Ru-NBD is nonluminescent due to the quenching of Ru(II) complex emission by photoinduced electron transfer (PET) from Ru(II) center to NBD and the quenching of NBD emission through 4-substitution with "O" ether bond. Ru-NBD is capable of reacting with Cys/Hcy to form long-lived red-emitting Ru-OH and short-lived green-emitting NBD-NR, while reacting with GSH to produce Ru-OH and nonemissive NBD-SR. The long lifetime emission of Ru(II) complex allows elimination of short lifetime background and NBD-NR fluorescence for total biothiols detection ("bird" one) by time-gated luminescence (TGL) analysis, and the remarkable difference in luminescence color response allows discrimination GSH and Cys/Hcy ("bird" two) through steady-state luminescence analysis. Ru-NBD features high sensitivity and selectivity, rapid luminescence response, and low cytotoxicity, which enables it to be used as the probe for luminescence and background-free TGL detection and visualization of biothiols in live cells, zebrafish, and mice. The successful development of this probe is anticipated to contribute to the future biological studies of biothiols roles in various diseases.

Structure Engineering of a Lanthanide-Based Metal-Organic Framework for the Regulation of Dynamic Ranges and Sensitivities for Pheochromocytoma Diagnosis

Exploring innovative technologies to precisely quantify biomolecules is crucial but remains a great challenge for disease diagnosis. Unfortunately, the humoral concentrations of most biotargets generally vary within rather limited scopes between normal and pathological states, while most literature-reported biosensors can detect large spans of targets concentrations, but are less sensitive to small concentration changes, which consequently make them mostly unsatisfactory or even unreliable in distinguishing positives from negatives. Herein, a novel strategy of precisely quantifying the small concentration changes of a certain biotarget by editing the dynamic ranges and sensitivities of a lanthanide-based metal-organic framework (Eu-ZnMOF) biosensor is reported. By elaborately tailoring the biosensor's structure and surface areas, the tunable Eu-ZnMOF is developed with remarkably enhanced response slope within the "optimized useful detection window," enabling it to serve as a powerful signal amplifier (87.2-fold increase) for discriminating the small concentration variation of urinary vanillylmandelic acid (an early pathological signature of pheochromocytoma) within only three times between healthy and diseased subjects. This study provides a facile approach to edit the biosensors' performances through structure engineering, and exhibits promising perspectives for future clinical application in the non-invasive and accurate diagnosis of severe diseases.