Constructing an Adaptive Heterojunction as a Highly Active Catalyst for the Oxygen Evolution Reaction

Direct Identification of O─O Bond Formation Through Three-Step Oxidation During Water Splitting by Operando Soft X-ray Absorption Spectroscopy

Anionic redox allows the direct formation of O─O bonds from lattice oxygens and provides higher catalytic in the oxygen evolution reaction (OER) than does the conventional metal ion mechanism. While previous theories have predicted and experiments have suggested the possible O─O bond, it has not yet been directly observed in the OER process. In this study, operando soft X-ray absorption spectroscopy (sXAS) at the O K-edge and the operando Raman spectra is performed on layered double CoFe hydroxides (LDHs) after intercalation with [Cr(C2O4)3]3-, and revealed a three-step oxidation process, staring from Co2+ to Co3+, further to Co4+ (3d6L), and ultimately leading to the formation of O─O bonds and O2 evolution above a threshold voltage (1.4 V). In contrast, a gradual oxidation of Fe is observed in CoFe LDHs. The OER activity exhibits a significant enhancement, with the overpotential decreasing from 300 to 248 mV at 10 mA cm-2, following the intercalation of [Cr(C2O4)3]3- into CoFe LDHs, underscoring a crucial role of anionic redox in facilitating water splitting.

Thiosalicylic-Acid-Mediated Coordination Structure of Nickel Center via Thermodynamic Modulation for Aqueous Ni-Zn Batteries

Uniquely functional nanocomplexes with rich coordination environments are critical in energy storage. However, the construction of structurally versatile nanocomplexes remains challenging. In this study, a nickel-based complex with structural variations is designed via thermodynamic modulation using a dual-ligand synthesis strategy. A nickel-based nanomaterial (NiSA-SSA-160) with a large specific surface area is synthesized around the competing coordination of the host and guest molecules that differ in terms of the chemical properties of the O and S elements. Concurrently, the coordination environment of NiSA-SSA-160 is investigated via X-ray absorption fine structure spectroscopy. The thiol functional groups synergistically induced an electron-rich Ni structure, thus increasing the electron density of the central atom. The electrochemical performance of an assembled NiSA-SSA-160//Zn@CC battery is shown to improve significantly, with a maximum energy density of 0.54 mWh cm-2 and a peak power density of 49.49 mW cm-2. This study provides a new perspective regarding coordination transformations and offers an idea for the design of functionally rich nanomaterials.

Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction

Water electrolysis is one promising and eco-friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2-xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best-performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe-based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2-xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large-scale and sustainable hydrogen gas generation.

Ultrathin High-Entropy Fe-Based Spinel Oxide Nanosheets with Metalloid Band Structures for Efficient Nitrate Reduction toward Ammonia

Spinel oxides with tunable chemical compositions have emerged as versatile electrocatalysts, however their performance is greatly limited by small surface area and low electron conductivity. Here, ultrathin high-entropy Fe-based spinel oxides nanosheets are rationally designed (i.e., (Co0.2Ni0.2Zn0.2Mg0.2Cu0.2)Fe2O4; denotes A5Fe2O4) in thickness of ≈4.3 nm with large surface area and highly exposed active sites via a modified sol-gel method. Theoretic and experimental results confirm that the bandgap of A5Fe2O4 nanosheets is significantly smaller than that of ordinary Fe-based spinel oxides, realizing the transformation of binary spinel oxide from semiconductors to metalloids. As a result, such A5Fe2O4 nanosheets manifest excellent performance for the nitrate reduction reaction (NO3 -RR) to ammonia (NH3), with a NH3 yield rate of ≈2.1 mmol h-1 cm-2 at -0.5 V versus Reversible hydrogen electrode, outperforming other spinel-based electrocatalysts. Systematic mechanism investigations reveal that the NO3 -RR is mainly occurred on Fe sites, and introducing high-entropy compositions in tetrahedral sites regulates the adsorption strength of N and O-related intermediates on Fe for boosting the NO3 -RR. The above findings offer a high-entropy platform to regulate the bandgap and enhance the electrocatalytic performance of spinel oxides.

Facet-Dependent Surface Restructuring on Nickel (Oxy)hydroxides: A Self-Activation Process for Enhanced Oxygen Evolution Reaction

Unraveling the catalyst surface structure and behavior during reactions is essential for both mechanistic understanding and performance optimization. Here we report a phenomenon of facet-dependent surface restructuring intrinsic to β-Ni(OH)2 catalysts during oxygen evolution reaction (OER), discovered by the correlative ex situ and operando characterization. The ex situ study after OER reveals β-Ni(OH)2 restructuring at the edge facets to form nanoporous Ni1-xO, which is Ni deficient containing Ni3+ species. Operando liquid transmission electron microscopy (TEM) and Raman spectroscopy further identify the active role of the intermediate β-NiOOH phase in both the OER catalysis and Ni1-xO formation, pinpointing the complete surface restructuring pathway. Such surface restructuring is shown to effectively increase the exposed active sites, accelerate Ni oxidation kinetics, and optimize *OH intermediate bonding energy toward fast OER kinetics, which leads to an extraordinary activity enhancement of ∼16-fold. Facilitated by such a self-activation process, the specially prepared β-Ni(OH)2 with larger edge facets exhibits a 470-fold current enhancement than that of the benchmark IrO2, demonstrating a promising way to optimize metal-(oxy)hydroxide-based catalysts.

Tailoring atomic chemistry to refine reaction pathway for the most enhancement by magnetization in water oxidation

Water oxidation on magnetic catalysts has generated significant interest due to the spin-polarization effect. Recent studies have revealed that the disappearance of magnetic domain wall upon magnetization is responsible for the observed oxygen evolution reaction (OER) enhancement. However, an atomic picture of the reaction pathway remains unclear, i.e., which reaction pathway benefits most from spin-polarization, the adsorbent evolution mechanism, the intermolecular mechanism (I2M), the lattice oxygen-mediated one, or more? Here, using three model catalysts with distinguished atomic chemistries of active sites, we are able to reveal the atomic-level mechanism. We found that spin-polarized OER mainly occurs at interconnected active sites, which favors direct coupling of neighboring ligand oxygens (I2M). Furthermore, our study reveals the crucial role of lattice oxygen participation in spin-polarized OER, significantly facilitating the coupling kinetics of neighboring oxygen radicals at active sites.

Triggering efficient reconstructions of Co/Fe dual-metal incorporated Ni hydroxide by phosphate additives for electrochemical hydrogen and oxygen evolutions

Alkaline electrochemical water splitting has been considered as an efficient way for the green hydrogen production in industry, where the electrocatalysts play the critical role for the electricity-to-fuel conversion efficiency. Phosphate salts are widely used as additives in the fabrication of electrocatalysts with improved activity, but their roles on the electrocatalytic performance have not been fully understood. Herein, we fabricate Co, Fe dual-metal incorporated Ni hydroxide on Ni foam using NaH2PO4 ((Co, Fe)NiOxHy-pi) and NaH2PO2 ((Co, Fe)NiOxHy-hp) as additive, respectively. We find that (Co, Fe)NiOxHy-hp with NaH2PO2 in the fabrication shows high activity and stability for both HER and OER (a overpotential of -0.629 V and 0.65 V at 400 mA cm-2 for HER and OER, respectively). Further experiment reveals that the reconstructed structures of electrocatalyst by using NaH2PO2 (hp) endow high electrocatalytic performances: (1) in-situ generated active metal improves the accumulation, transportation and activity of hydrogen species in the HER process; and (2) in-situ generated poor-crystalline hydroxide endows superior charge/mass transportation and kinetics improvements in the OER process. Our study may provide an insightful understanding on the catalytic performance of non-precious metal electrocatalysts by controlling additives and guidance for the design and synthesis of novel electrocatalysts.

Directional Electrosynthesis of Adipic Acid and Cyclohexanone by Controlling the Active Sites on NiOOH

Dicarboxylic acids and cyclic ketones, such as adipic acid (AA) and cyclohexanone (CHN), are essential compounds for the chemical industry. Although their production by electrosynthesis using electricity is considered one of the most promising strategies, the application of such processes has been hampered by a lack of efficient catalysts as well as a lack of understanding of the mechanism. Herein, a series of monolithic msig/ea-NiOOH-Ni(OH)2/NF were prepared by means of self-dissolution of metal matrix components, interface growth, and electrochemical activation (denoted as msig/ea). The as-synthesized catalysts have three-dimensional cuboid-like structures formed by interconnecting nanosheets composed of NiOOH. By theoretically guided regulation of the amounts of Ni3+ and oxygen vacancies (OV), a 96.5% yield of CHN from cyclohexanol (CHA) dehydrogenation and a 93.6% yield of AA from CHN oxidation were achieved. A combined experimental and theoretical study demonstrates that CHA dehydrogenation and CHN oxidation were promoted by the formation of Ni3+ and the peroxide species (*OOH) on OV. This work provides a promising approach for directional electrosynthesis of high-purity chemicals with in-depth mechanistic insights.

Fe-Regulated Amorphous-Crystal Ni(Fe)P2 Nanosheets Coupled with Ru Powerfully Drive Seawater Splitting at Large Current Density

Water electrolysis is an ideal method for industrial green hydrogen production. However, due to increasing scarcity of freshwater, it is inevitable to develop advanced catalysts for electrolyzing seawater especially at large current density. This work reports a unique Ru nanocrystal coupled amorphous-crystal Ni(Fe)P2 nanosheet bifunctional catalyst (Ru-Ni(Fe)P2 /NF), caused by partial substitution of Fe to Ni atoms in Ni(Fe)P2 , and explores its electrocatalytic mechanism by density functional theory (DFT) calculations. Owing to high electrical conductivity of crystalline phases, unsaturated coordination of amorphous phases, and couple of Ru species, Ru-Ni(Fe)P2 /NF only requires overpotentials of 375/295 and 520/361 mV to drive a large current density of 1 A cm-2 for oxygen/hydrogen evolution reaction (OER/HER) in alkaline water/seawater, respectively, significantly outperforming commercial Pt/C/NF and RuO2 /NF catalysts. In addition, it maintains stable performance at large current density of 1 A cm-2 and 600 mA cm-2 for 50 h in alkaline water and seawater, respectively. This work provides a new way for design of catalysts toward industrial-level seawater splitting.

Immobilization of Oxyanions on the Reconstructed Heterostructure Evolved from a Bimetallic Oxysulfide for the Promotion of Oxygen Evolution Reaction

Efficient and durable oxygen evolution reaction (OER) requires the electrocatalyst to bear abundant active sites, optimized electronic structure as well as robust component and mechanical stability. Herein, a bimetallic lanthanum-nickel oxysulfide with rich oxygen vacancies based on the La2O2S prototype is fabricated as a binder-free precatalyst for alkaline OER. The combination of advanced in situ and ex situ characterizations with theoretical calculation uncovers the synergistic effect among La, Ni, O, and S species during OER, which assures the adsorption and stabilization of the oxyanion [Formula: see text] onto the surface of the deeply reconstructed porous heterostructure composed of confining NiOOH nanodomains by La(OH)3 barrier. Such coupling, confinement, porosity and immobilization enable notable improvement in active site accessibility, phase stability, mass diffusion capability and the intrinsic Gibbs free energy of oxygen-containing intermediates. The optimized electrocatalyst delivers exceptional alkaline OER activity and durability, outperforming most of the Ni-based benchmark OER electrocatalysts.

Molecular Engineering of Metal-Organic Frameworks as Efficient Electrochemical Catalysts for Water Oxidation

Metal-organic framework (MOF) solids with their variable functionalities are relevant for energy conversion technologies. However, the development of electroactive and stable MOFs for electrocatalysis still faces challenges. Here, a molecularly engineered MOF system featuring a 2D coordination network based on mercaptan-metal links (e.g., nickel, as for Ni(DMBD)-MOF) is designed. The crystal structure is solved from microcrystals by a continuous-rotation electron diffraction (cRED) technique. Computational results indicate a metallic electronic structure of Ni(DMBD)-MOF due to the Ni-S coordination, highlighting the effective design of the thiol ligand for enhancing electroconductivity. Additionally, both experimental and theoretical studies indicate that (DMBD)-MOF offers advantages in the electrocatalytic oxygen evolution reaction (OER) over non-thiol (e.g., 1,4-benzene dicarboxylic acid) analog (BDC)-MOF, because it poses fewer energy barriers during the rate-limiting *O intermediate formation step. Iron-substituted NiFe(DMBD)-MOF achieves a current density of 100 mA cm^-2 at a small overpotential of 280 mV, indicating a new MOF platform for efficient OER catalysis.

Navigating surface reconstruction of spinel oxides for electrochemical water oxidation

Understanding and mastering the structural evolution of water oxidation electrocatalysts lays the foundation to finetune their catalytic activity. Herein, we demonstrate that surface reconstruction of spinel oxides originates from the metal-oxygen covalency polarity in the M_T-O-M_O backbone. A stronger M_O-O covalency relative to M_T-O covalency is found beneficial for a more thorough reconstruction towards oxyhydroxides. The structure-reconstruction relationship allows precise prediction of the reconstruction ability of spinel pre-catalysts, based on which the reconstruction degree towards the in situ generated oxyhydroxides can be controlled. The investigations of oxyhydroxides generated from spinel pre-catalysts with the same reconstruction ability provide guidelines to navigate the cation selection in spinel pre-catalysts design. This work reveals the fundamentals for manipulating the surface reconstruction of spinel pre-catalysts for water oxidation.

Unusual double ligand holes as catalytic active sites in LiNiO2

Designing efficient catalyst for the oxygen evolution reaction (OER) is of importance for energy conversion devices. The anionic redox allows formation of O-O bonds and offers higher OER activity than the conventional metal sites. Here, we successfully prepare LiNiO₂ with a dominant 3d⁸L configuration (L is a hole at O 2p) under high oxygen pressure, and achieve a double ligand holes 3d⁸L² under OER since one electron removal occurs at O 2p orbitals for Ni^III oxides. LiNiO₂ exhibits super-efficient OER activity among LiMO₂, RMO₃ (M = transition metal, R = rare earth) and other unary 3d catalysts. Multiple in situ/operando spectroscopies reveal Ni^III→Ni^IV transition together with Li-removal during OER. Our theory indicates that Ni^IV (3d⁸L²) leads to direct O-O coupling between lattice oxygen and *O intermediates accelerating the OER activity. These findings highlight a new way to design the lattice oxygen redox with enough ligand holes created in OER process.

Inhibitor and Activator: Dual Role of Subsurface Sulfide Enables Selective and Efficient Electro-Oxidation of Methanol to Formate on CuS@CuO Core-Shell Nanosheet Arrays

Selective electro-oxidation of aliphatic alcohols into value-added carboxylates at lower potentials than that of the oxygen evolution reaction (OER) is an environmentally and economically desirable anode reaction for clean energy storage and conversion technologies. However, it is challenging to achieve both high selectivity and high activity of the catalysts for the electro-oxidation of alcohols, such as the methanol oxidation reaction (MOR). Herein, a monolithic CuS@CuO/copper-foam electrode for the MOR with superior catalytic activity and almost 100% selectivity for formate is reported. In the core-shell CuS@CuO nanosheet arrays, the surface CuO directly catalyzes MOR, while the subsurface sulfide not only serves as an inhibitor to attenuate the oxidative power of the surface CuO to achieve selective oxidation of methanol to formate and prevent over-oxidation of formate to CO₂ but also serves as an activator to form more surface O defects as active sites and enhances the methanol adsorption and charge transfer to achieve superior catalytic activity. CuS@CuO/copper-foam electrodes can be prepared on a large scale by electro-oxidation of copper-foam at ambient conditions and can be readily utilized in clean energy technologies.

Reconstructured Electrocatalysts during Oxygen Evolution Reaction under Alkaline Electrolytes

The development of electrocatalysts with high-efficiency and clear structure-activity relationship towards the sluggish oxygen evolution reaction (OER) is essential for the wide application of water electrolyzers. Recently, the dynamic reconstruction phenomenon of the catalysts' surface structures during the OER process has been discovered. With the help of various advanced ex situ and in situ characterization, it is demonstrated that such surface reconstruction could yield actual active species to catalyze the water oxidation process. However, the attention and studies of potential interaction between reconstructed species and substrate are lacking. This review summarizes the recent development of typical reconstructed electrocatalysts and the substrate effect. First, the advanced characterization for electrocatalytic reconstruction is briefly discussed. Then, typical reconstructed electrocatalysts are comprehensively summarized and the key role of substrate effects during the OER process is emphasized. Finally, the future challenges and perspectives of surface reconstructed catalysts for water electrolysis are discussed.

Reviving Oxygen Evolution Electrocatalysis of Bulk La-Ni Intermetallics via Gaseous Hydrogen Engineering

A hydrogen processing strategy is developed to enable bulk LaNi₅ to attain high activity and long-term stability toward the electrocatalytic oxygen evolution reaction (OER). By a combination of in situ Raman and quasi in situ X-ray absorption (XAS) spectra, secondary-electron-excited scanning transmission electron microscopy (STEM) patterns as well as the Rietveld method and density functional theory (DFT) calculations, it is discovered that hydrogen-induced lattice distortion, grain refinement, and particle cracks dictate the effective reconstruction of the LaNi₅ surface into a porous hetero-nanoarchitecture composed of uniformly confined active γ-NiOOH nanocrystals by La(OH)₃ layer in the alkaline OER process. This significantly optimizes the charge transfer, structural integrity, active-site exposure, and adsorption energy toward the reaction intermediates. Benefiting from these merits, the overpotential (322 mV) at 100 mA cm^-2 for the hydrogen-processed OER catalyst deposited on nickel foam is reduced by 104 mV as compared to the original phase. Notably, it exhibits remarkable stability for 10 days at an industrial-grade current density of more than 560 mA cm^-2 in alkaline media.

Subsurface Engineering Induced Fermi Level De-pinning in Metal Oxide Semiconductors for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising approach for renewable solar light conversion. However, surface Fermi level pinning (FLP), caused by surface trap states, severely restricts the PEC activities. Theoretical calculations indicate subsurface oxygen vacancy (sub-O_v ) could release the FLP and retain the active structure. A series of metal oxide semiconductors with sub-O_v were prepared through precisely regulated spin-coating and calcination. Etching X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and electron energy loss spectra (EELS) demonstrated O_v located at sub ∼2-5 nm region. Mott-Schottky and open circuit photovoltage results confirmed the surface trap states elimination and Fermi level de-pinning. Thus, superior PEC performances of 5.1, 3.4, and 2.1 mA cm^-2 at 1.23 V vs. RHE were achieved on BiVO₄ , Bi₂ O₃ , TiO₂ with outstanding stability for 72 h, outperforming most reported works under the identical conditions.

A comprehensive review on the electrochemical parameters and recent material development of electrochemical water splitting electrocatalysts

Electrochemical splitting of water is an appealing solution for energy storage and conversion to overcome the reliance on depleting fossil fuel reserves and prevent severe deterioration of the global climate. Though there are several fuel cells, hydrogen (H2) and oxygen (O2) fuel cells have zero carbon emissions, and water is the only by-product. Countless researchers worldwide are working on the fundamentals, i.e. the parameters affecting the electrocatalysis of water splitting and electrocatalysts that could improve the performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) and overall simplify the water electrolysis process. Noble metals like platinum for HER and ruthenium and iridium for OER were used earlier; however, being expensive, there are more feasible options than employing these metals for all commercialization. The review discusses the recent developments in metal and metalloid HER and OER electrocatalysts from the s, p and d block elements. The evaluation perspectives for electrocatalysts of electrochemical water splitting are also highlighted.

Reconstruction of Thiospinel to Active Sites and Spin Channels for Water Oxidation

Water electrolysis is a promising technique for carbon neutral hydrogen production. A great challenge remains at developing robust and low-cost anode catalysts. Many pre-catalysts are found to undergo surface reconstruction to give high intrinsic activity in the oxygen evolution reaction (OER). The reconstructed oxyhydroxides on the surface are active species and most of them outperform directly synthesized oxyhydroxides. The reason for the high intrinsic activity remains to be explored. Here, a study is reported to showcase the unique reconstruction behaviors of a pre-catalyst, thiospinel CoFe₂ S₄ , and its reconstruction chemistry for a high OER activity. The reconstruction of CoFe₂ S₄ gives a mixture with both Fe-S component and active oxyhydroxide (Co(Fe)O_x H_y ) because Co is more inclined to reconstruct as oxyhydroxide, while the Fe is more stable in Fe-S component in a major form of Fe₃ S₄ . The interface spin channel is demonstrated in the reconstructed CoFe₂ S₄ , which optimizes the energetics of OER steps on Co(Fe)O_x H_y species and facilitates the spin sensitive electron transfer to reduce the kinetic barrier of O-O coupling. The advantage is also demonstrated in a membrane electrode assembly (MEA) electrolyzer. This work introduces the feasibility of engineering the reconstruction chemistry of the precatalyst for high performance and durable MEA electrolyzers.

CoP/Fe-Co9 S8 for Highly Efficient Overall Water Splitting with Surface Reconstruction and Self-Termination

Highly efficient electrochemical water splitting is of prime importance in hydrogen energy but is suffered from the slow kinetics at the anodic oxygen evolution reaction. Herein, combining the surface activation with the heterostructure construction strategy, the CoP/Fe-Co₉ S₈ heterostructures as the pre-catalyst for highly efficient oxygen evolution are successfully synthesized. The catalyst only needs 156 mV to reach 10 mA cm^-2 and keeps stable for more than 150 h. Inductively coupled plasma optical emission spectrometry, in situ Raman spectroscopy and density functional theory calculations verify that the introduction of Fe can promote the formation of highly active Co(IV)-O sites and lead to a self-termination of surface reconstruction, which eventually creates a highly active and stable oxygen evolution catalytic surface. Besides, the catalyst also demonstrates high hydrogen evolution reaction activity with an overpotential of 62 mV@10 mA cm^-2 . Benefiting from its bifunctionality and self-supporting property, the membrane electrode assembly electrolyzer equipped with these catalysts achieves high overall water splitting efficiency of 1.68 V@1 A cm^-2 .

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

Optimized NiFe-Based Coordination Polymer Catalysts: Sulfur-Tuning and Operando Monitoring of Water Oxidation

In-depth insights into the structure-activity relationships and complex reaction mechanisms of oxygen evolution reaction (OER) electrocatalysts are indispensable to efficiently generate clean hydrogen through water electrolysis. We introduce a convenient and effective sulfur heteroatom tuning strategy to optimize the performance of active Ni and Fe centers embedded into coordination polymer (CP) catalysts. Operando monitoring then provided the mechanistic understanding as to how exactly our facile sulfur engineering of Ni/Fe-CPs optimizes the local electronic structure of their active centers to facilitate dioxygen formation. The high OER activity of our optimized S-R-NiFe-CPs outperforms the most recent NiFe-based OER electrocatalysts. Specifically, we start from oxygen-deprived O_d-R-NiFe-CPs and transform them into highly active Ni/Fe-CPs with tailored sulfur coordination environments and anionic deficiencies. Our operando X-ray absorption spectroscopy analyses reveal that sulfur introduction into our designed S-R-NiFe-CPs facilitates the formation of crucial highly oxidized Ni⁴⁺ and Fe⁴⁺ species, which generate oxygen-bridged Ni^IV-O-Fe^IV moieties that act as the true OER active intermediates. The advantage of our sulfur-doping strategy for enhanced OER is evident from comparison with sulfur-free O_d-R-NiFe-CPs, where the formation of essential high-valent OER intermediates is hindered. Moreover, we propose a dual-site mechanism pathway, which is backed up with a combination of pH-dependent performance data and DFT calculations. Computational results support the benefits of sulfur modulation, where a lower energy barrier enables O-O bond formation atop the S-Ni^IV-O-Fe^IV-O moieties. Our convenient anionic tuning strategy facilitates the formation of active oxygen-bridged metal motifs and can thus promote the design of flexible and low-cost OER electrocatalysts.

Bimetal Modulation Stabilizing a Metallic Heterostructure for Efficient Overall Water Splitting at Large Current Density

Large current-driven alkaline water splitting for large-scale hydrogen production generally suffers from the sluggish charge transfer kinetics. Commercial noble-metal catalysts are unstable in large-current operation, while most non-noble metal catalysts can only achieve high activity at low current densities <200 mA cm^-2 , far lower than industrially-required current densities (>500 mA cm^-2 ). Herein, a sulfide-based metallic heterostructure is designed to meet the industrial demand by regulating the electronic structure of phase transition coupling with interfacial defects from Mo and Ni incorporation. The modulation of metallic Mo₂ S₃ and in situ epitaxial growth of bifunctional Ni-based catalyst to construct metallic heterostructure can facilitate the charge transfer for fast Volmer H and Heyrovsky H₂ generation. The Mo₂ S₃ @NiMo₃ S₄ electrolyzer requires an ultralow voltage of 1.672 V at a large current density of 1000 mA cm^-2 , with ≈100% retention over 100 h, outperforming the commercial RuO₂ ||Pt/C, owing to the synergistic effect of the phase and interface electronic modulation. This work sheds light on the design of metallic heterostructure with an optimized interfacial electronic structure and abundant active sites for industrial water splitting.

Activating Lattice Oxygen in Layered Lithium Oxides through Cation Vacancies for Enhanced Urea Electrolysis

Despite the fact that high-valent nickel-based oxides exhibit promising catalytic activity for the urea oxidation reaction (UOR), the fundamental questions concerning the origin of the high performance and the structure-activity correlations remain to be elucidated. Here, we unveil the underlying enhanced mechanism of UOR by employing a series of prepared cation-vacancy controllable LiNiO₂ (LNO) model catalysts. Impressively, the optimized layered LNO-2 exhibits an extremely low overpotential at 10 mA cm^-2 along with excellent stability after the 160 h test. Operando characterisations combined with the theoretical analysis reveal the activated lattice oxygen in layered LiNiO₂ with moderate cation vacancies triggers charge disproportion of the Ni site to form Ni⁴⁺ species, facilitating deprotonation in a lattice oxygen involved catalytic process.

Effects of A-site Cations in Quadruple Perovskite Ruthenates on Oxygen Evolution Catalysis in Acidic Aqueous Solutions

The quadruple perovskite ruthenate CaCu₃ Ru₄ O₁₂ is more active and stable than the benchmark catalyst RuO₂ in the oxygen evolution reaction (OER) in acidic aqueous solutions, where many oxide-based catalysts are dissolved. Studies on the crystal structures of quadruple perovskite ruthenates are rare, and the origin of OER activity or stability from a structural aspect has not been clarified in detail. This presents the need to study the effects of cations at the A site of quadruple perovskite ruthenates ACu₃ Ru₄ O₁₂ (A = Ca, Sr, La, Nd, and Ce) on the OER catalytic activity and stability in acidic aqueous solutions. CaCu₃ Ru₄ O₁₂ has the highest activity and stability among all quadruple perovskite samples. The type of cation at the A site changes the average Cu and Ru valence states, and the plot of OER activity versus the average Cu valence number shows a volcano-type relationship. In addition, stability increases with a decrease in Ru-O bond length. This research provides a good design principle for OER catalysts with high activity and stability in severely acidic aqueous solutions.

Tailoring Oxygen Reduction Reaction Pathway on Spinel Oxides via Surficial Geometrical-Site Occupation Modification Driven by the Oxygen Evolution Reaction

The oxygen reduction reaction (ORR) has been demonstrated as a critical technology for both energy conversion technologies and hydrogen peroxide intermediate production. Herein, an in situ oxygen evolution reaction (OER) surface evolution strategy is applied for changing the surface structure of MnCo₂ O₄ oxide with tetrahedral and octahedral cations vacancies to realize reaction pathway switching from 2e^- ORR and 4e^- ORR. Interestingly, the as-synthesized MnCo₂ O₄ -pristine (MnCo₂ O₄ -P) with the highest surficial Mn/Co octahedron occupation favors two electrons reaction routes exhibiting high H₂ O₂ selectivity (≈80% and reaches nearly 100% at 0.75 V vs RHE); after surface atoms reconstruction, MnCo₂ O₄ -activation (MnCo₂ O₄ -A) with the largest Mn/Co tetrahedron occupation present excellent ORR performance through the four-electron pathway with an ultrahigh onset potential and half-wave potential of 0.78 and 0.92 V, ideal mass activity (MA), and turnover frequencies (TOF) values. Density functional theory (DFT) calculations reveal the concurrent modulations of both Co and Mn by the surface reconstructions, which improve the electroactivity of MnCo₂ O₄ -A toward the 4e^- pathway. This work provides a new perspective to building correlation of OER activation-ORR property, bringing detailed understating for reaction route transformation, and thus guiding the development of certain electrocatalysts with specific purposes.

In situ Raman spectroscopy reveals the structure evolution and lattice oxygen reaction pathway induced by the crystalline-amorphous heterojunction for water oxidation

One of the most successful approaches for balancing the high stability and activity of water oxidation in alkaline solutions is to use amorphous and crystalline heterostructures. However, due to the lack of direct evidence at the molecular level, the nano/micro processes of amorphous and crystalline heterostructure electrocatalysts, including self-reconstruction and reaction pathways, remain unknown. Herein, the Leidenfrost effect assisted electrospray approach combined with phase separation was used for the first time to create amorphous NiO_x/crystalline α-Fe₂O₃ (a-NiO_x/α-Fe₂O₃) nanowire arrays. The results of in situ Raman spectroscopy demonstrate that with the increase of the potential at the a-NiO_x/α-Fe₂O₃ interface, a significant accumulation of OH can be observed. Combining with XAS spectra and DFT calculations, we believe that more OH adsorption on the Ni centers can facilitate Ni²⁺ deprotonation to achieve the high-valence oxidation of Ni⁴⁺ according to HSAB theory (Fe³⁺ serves as a strong Lewis acid). This result promotes the electrocatalysts to follow the lattice oxygen activation mechanism. This work, for the first time, offers direct spectroscopic evidence for deepening the fundamental understanding of the Lewis acid effect of Fe³⁺, and reveals the synergistic effect on water oxidation via the unique amorphous and crystalline heterostructures.

The amorphous NiO_x/crystalline α-Fe₂O₃ heterojunctions were constructed and exhibited outstanding OER activities. Through the collaboration of multiple characterization techniques, the Lewis acid effect of Fe³⁺ was revealed at molecular level.

Molecular-Scale Manipulation of Layer Sequence in Heteroassembled Nanosheet Films toward Oxygen Evolution Electrocatalysts

Flocculation or restacking of different kinds of two-dimensional (2D) nanosheets into heterostructure nanocomposites is of interest for the development of high-performance electrode materials and catalysts. However, lacking a molecular-scale control on the layer sequence hinders enhancement of electrochemical activity. Herein, we conducted electrostatic layer-by-layer (LbL) assembly, employing oxide nanosheets (e.g., MnO₂, RuO_2.1, reduced graphene oxide (rGO)) and layered double hydroxide (LDH) nanosheets (e.g., NiFe-based LDH) to explore a series of mono- and bilayer films with various combinations of nanosheets and sequences toward oxygen evolution reaction (OER). The highest OER activity was attained in bilayer films of electrically conductive RuO_2.1 nanosheets underlying catalytically active NiFe LDH nanosheets with mixed octahedral/tetrahedral coordination (NiFe LDH_Td/Oh). At an overpotential of 300 mV, the RuO_2.1/NiFe LDH_Td/Oh film exhibited an electrochemical surface area (ECSA) normalized current density of 2.51 mA cm^-2_ECSA and a mass activity of 3610 A g^-1, which was, respectively, 2 and 5 times higher than that of flocculated RuO_2.1/NiFe LDH_Td/Oh aggregates with a random appearance of a surface layer. First-principles density functional theory calculations and COMSOL Multiphysics simulations further revealed that the improved catalytic performance was ascribed to a substantial electronic coupling effect in the heterostructure, in which electrons are transferred from exposed NiFe LDH_Td/Oh nanosheets to underneath RuO_2.1. The study provides insight into the rational control and manipulation of redox-active surface layers and conductive underlying layers in heteroassembled nanosheet films at molecular-scale precision for efficient electrocatalysis.

Battery-Driven N2 Electrolysis Enabled by High-Entropy Catalysts: From Theoretical Prediction to Prototype Model

A small-scale standalone device of nitrogen (N₂ ) splitting holds great promise for producing ammonia (NH₃ ) in a decentralized manner as the compensation or replacement of centralized Haber-Bosch process. However, the design of such a device has been impeded by sluggish kinetics of its half reactions, i.e., cathodic N₂ reduction reaction (NRR) and anodic oxygen evolution reaction (OER). Here, it is predicted from density function theory that high-entropy oxides (HEOs) are potential catalysts for promoting NRR and OER, and subsequently develop a facile procedure to synthesize HEOs in the morphology of sea urchin-shaped hollow nanospheres assembled from ultrathin nanosheets. The excellent electrocatalytic activities of HEOs for both NRR (NH₃ yield rate: 47.58 µg h^-1 mg^-1 and Faradaic efficiency (FE): 10.74%) and OER (215 mV @10 mA cm^-2 ) are demonstrated. Consequently, a prototype device of N₂ electrolysis driven by commercial batteries is constructed, which can operate smoothly and deliver remarkable NH₃ yield rate (41.11 µg h^-1 mg^-1 ) and FE (14.14%). Further mechanism study has attributed the excellent catalytic performances of HEOs to their unique electronic structures originated from multi-metal synergistic effects and entropy increase effects. The work will provide new clues for designing versatile catalysts and devices for large-scale industrialization.

Coordinated Co-NC/CoFe dual active centre embedded three-dimensional ordered macroporous framework as bifunctional catalyst for efficient and stable zinc-air batteries

Developing efficient and stable multifunctional electrocatalyst is very important for zinc-air batteries in practical. Herein, semiconductive spinel CuFe₂O₄supported Co-N co-doped carbon (Co-NC) and CoFe alloy nanoparticles were proposed. In this strategy, the three-dimensional ordered macroporous CuFe₂O₄support provides rich channels for mass transmission, revealling good corrosion-resistance and durability at the same time. ZIF-67 derived Co-NC decoration improves the conductivity of the catalyst. Further, the uniformly distributed Co-NC and CoFe nanoparticles (C/CF) dramatically promote the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performance. Accordingly, C/CF@CuFe₂O₄catalyst shows remarkable bifunctional electrocatalytic activity, with an ORR half-wave potential of 0.86 V, and an OER over-potential of 0.46 V at 10 mA cm^-2. The zinc-air battery using this catalyst exhibits a power density of 95.5 mW cm^-2and a durable cyclability for over 170 h at a current density of 10 mA cm^-2, which implies a great potential in practical application.

Electrocatalyst Design for Conversion of Energy Molecules: Electronic State Modulation and Mass Transport Regulation

Electrocatalytic conversions of energy molecules are involved in many energy conversion processes. Improving the activity of electrocatalyst is critical for increasing the efficiency of these energy conversion processes. However, the...

A Heterostructured FeNi Hydroxide for Effective Electrocatalytic Oxygen Evolution

Hydrogen production technology by water splitting has been heralded as an effective means to alleviate the envisioned energy crisis. However, the overall efficiency of water splitting is limited by the effectiveness of the anodic oxygen evolution reaction (OER) due to the high energy barrier of the 4e⁻ process. The key to addressing this challenge is the development of high-performing catalysts. Transition-metal hydroxides with high intrinsic activity and stability have been widely studied for this purpose. Herein, we report a gelatin-induced structure-directing strategy for the preparation of a butterfly-like FeNi/Ni heterostructure (FeNi/Ni HS) with excellent catalytic performance. The electronic interactions between Ni²⁺ and Fe³⁺ are evident both in the mixed-metal “torso” region and at the “torso/wing” interface with increasing Ni³⁺ as a result of electron transfer from Ni²⁺ to Fe³⁺ mediated by the oxo bridge. The amount of Ni³⁺ also increases in the “wings”, which is believed to be a consequence of charge balancing between Ni and O ions due to the presence of Ni vacancies upon formation of the heterostructure. The high-valence Ni³⁺ with enhanced Lewis acidity helps strengthen the binding with OH⁻ to afford oxygen-containing intermediates, thus accelerating the OER process. Direct evidence of FeNi/Ni HS facilitating the formation of the Ni–OOH intermediate was provided by in situ Raman studies; the intermediate was produced at lower oxidation potentials than when Ni₂(CO₃)(OH)₂ was used as the reference. The Co congener (FeCo/Co HS), prepared in a similar fashion, also showed excellent catalytic performance.

A butterfly-like FeNi/Ni HS featuring a “torso” of Ni-doped FeOOH and two “wings” of Ni₂(CO₃)(OH)₂ showed excellent activity in electrocatalytic oxygen evolution reaction attributable to the increase of higher-valance Ni³⁺ in the heterostructure.

Structural Transformation of Heterogeneous Materials for Electrocatalytic Oxygen Evolution Reaction

Electrochemical water splitting for hydrogen generation is a promising pathway for renewable energy conversion and storage. One of the most important issues for efficient water splitting is to develop cost-effective and highly efficient electrocatalysts to drive sluggish oxygen-evolution reaction (OER) at the anode side. Notably, structural transformation such as surface oxidation of metals or metal nonoxide compounds and surface amorphization of some metal oxides during OER have attracted growing attention in recent years. The investigation of structural transformation in OER will contribute to the in-depth understanding of accurate catalytic mechanisms and will finally benefit the rational design of catalytic materials with high activity. In this Review, we provide an overview of heterogeneous materials with obvious structural transformation during OER electrocatalysis. To gain insight into the essence of structural transformation, we summarize the driving forces and critical factors that affect the transformation process. In addition, advanced techniques that are used to probe chemical states and atomic structures of transformed surfaces are also introduced. We then discuss the structure of active species and the relationship between catalytic performance and structural properties of transformed materials. Finally, the challenges and prospects of heterogeneous OER electrocatalysis are presented.

Advances in Understanding the Electrocatalytic Reconstruction Chemistry of Coordination Compounds

Coordination compounds including mainstream metal-organic frameworks and Prussian blue analogues receive extensive researches when they directly serve as electrocatalysts. Their reconstruction phenomena, that are closely associated with actual contributions and intrinsic catalytic mechanisms, are expected to be well summarized. Here, the recent advances in understanding reconstruction chemistry of coordination compounds are reviewed, including their main classifications and structural properties, reconstruction phenomena in electrocatalysis (e.g., oxygen/hydrogen evolution reaction, CO₂ reduction), influence factors of reconstruction parameters (e.g., reconstruction rate and reconstruction degree), and reconstruction-performance correlation. It is outlined that the reconstruction processes are influenced by electronic structure of coordination compounds, pH and temperature of testing solution, and applied potentials. The characterization techniques reflecting the evolution information before and after catalysis are also introduced for reconstruction-related mechanistic study. Finally, some challenges and outlooks on reconstruction investigations of coordination compounds are proposed, and the necessity of studying and understanding of these themes under actual working conditions of devices is highlighted.

A Durable Ni-Zn Microbattery with Ultrahigh-Rate Capability Enabled by In Situ Reconstructed Nanoporous Nickel with Epitaxial Phase

Powering device for miniaturized electronics is highly desired with well-maintained capacity and high-rate performance. Though Ni-Zn microbattery can meet the demand to some extent with intrinsic fast kinetic, it still suffers irreversible structure degradation due to the repeated lattice strain. Herein, a stable Ni-Zn microbattery with ultrahigh-rate performance is rationally constructed through in situ electrochemical approaches, including the reconstruction of nanoporous nickel and the introduction of epitaxial Zn(OH)₂ nanophase. With the enhanced ionic adsorption effect, the superior reactivity of the superficial nickel-based nanostructure is well stabilized. Based on facile miniaturization and electrochemical techniques, the fabricated nickel microelectrode exhibits 63.8% capacity retention when the current density is 500 times folded, and the modified hydroxides contribute to the great stability of the porous structure (92% capacity retention after 10 000 cycles). Furthermore, when the constructed Ni-Zn microbattery is measured in a practical metric, excellent power density (320.17 mW cm^-2 ) and stable fast-charging performance (over 90% capacity retention in 3500 cycles) are obtained. This surface reconstruction strategy for nanostructure provides a new direction for the optimization of electrode structure and enriches high-performance output units for integrated microelectronics.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.