1
|
Yue Y, Zhang D, Wang P, Xia X, Wu X, Zhang Y, Mei J, Li S, Li M, Wang Y, Zhang X, Wei X, Liu H, Zhou W. Large-Area Flexible Carbon Nanofilms with Synergistically Enhanced Transmittance and Conductivity Prepared by Reorganizing Single-Walled Carbon Nanotube Networks. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2313971. [PMID: 38573651 DOI: 10.1002/adma.202313971] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/20/2023] [Revised: 03/23/2024] [Indexed: 04/05/2024]
Abstract
Large-area flexible transparent conductive films (TCFs) are highly desired for future electronic devices. Nanocarbon TCFs are one of the most promising candidates, but some of their properties are mutually restricted. Here, a novel carbon nanotube network reorganization (CNNR) strategy, that is, the facet-driven CNNR (FD-CNNR) technique, is presented to overcome this intractable contradiction. The FD-CNNR technique introduces an interaction between single-walled carbon nanotube (SWNT) and Cu─-O. Based on the unique FD-CNNR mechanism, large-area flexible reorganized carbon nanofilms (RNC-TCFs) are designed and fabricated with A3-size and even meter-length, including reorganized SWNT (RSWNT) films and graphene and RSWNT (G-RSWNT) hybrid films. Synergistic improvement in strength, transmittance, and conductivity of flexible RNC-TCFs is achieved. The G-RSWNT TCF shows sheet resistance as low as 69 Ω sq-1 at 86% transmittance, FOM value of 35, and Young's modulus of ≈45 MPa. The high strength enables RNC-TCFs to be freestanding on water and easily transferred to any target substrate without contamination. A4-size flexible smart window is fabricated, which manifests controllable dimming and fog removal. The FD-CNNR technique can be extended to large-area or even large-scale fabrication of TCFs and can provide new insights into the design of TCFs and other functional films.
Collapse
Affiliation(s)
- Ying Yue
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Di Zhang
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Pengyu Wang
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Xiaogang Xia
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Xin Wu
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Yuejuan Zhang
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Jie Mei
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Shaoqing Li
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Mingming Li
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Yanchun Wang
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
| | - Xiao Zhang
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
- Songshan Materials Laboratory, Dongguan, Guangdong, 523808, China
| | - Xiaojun Wei
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
- Songshan Materials Laboratory, Dongguan, Guangdong, 523808, China
| | - Huaping Liu
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
- Songshan Materials Laboratory, Dongguan, Guangdong, 523808, China
| | - Weiya Zhou
- Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences and College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
- Songshan Materials Laboratory, Dongguan, Guangdong, 523808, China
| |
Collapse
|
2
|
Hong X, Xu Z, Lv ZP, Lin Z, Ahmadi M, Cui L, Liljeström V, Dudko V, Sheng J, Cui X, Tsapenko AP, Breu J, Sun Z, Zhang Q, Kauppinen E, Peng B, Ikkala O. High-permittivity Solvents Increase MXene Stability and Stacking Order Enabling Ultraefficient Terahertz Shielding. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2305099. [PMID: 38044310 PMCID: PMC10837367 DOI: 10.1002/advs.202305099] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/25/2023] [Revised: 10/26/2023] [Indexed: 12/05/2023]
Abstract
2D transition metal carbides and nitrides (MXenes) suggest an uncommonly broad combination of important functionalities amongst 2D materials. Nevertheless, MXene suffers from facile oxidation and colloidal instability upon conventional water-based processing, thus limiting applicability. By experiments and theory, It is suggested that for stability and dispersibility, it is critical to select uncommonly high permittivity solvents such as N-methylformamide (NMF) and formamide (FA) (εr = 171, 109), unlike the classical solvents characterized by high dipole moment and polarity index. They also allow high MXene stacking order within thin films on carbon nanotube (CNT) substrates, showing very high Terahertz (THz) shielding effectiveness (SE) of 40-60 dB at 0.3-1.6 THz in spite of the film thinness < 2 µm. The stacking order and mesoscopic porosity turn relevant for THz-shielding as characterized by small-angle X-ray scattering (SAXS). The mechanistic understanding of stability and structural order allows guidance for generic MXene applications, in particular in telecommunication, and more generally processing of 2D materials.
Collapse
Affiliation(s)
- Xiaodan Hong
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| | - Zhenyu Xu
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| | - Zhong-Peng Lv
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| | - Zhen Lin
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| | - Mohsen Ahmadi
- Department of Electronics and Nanoengineering, Aalto University, Espoo, 02150, Finland
| | - Linfan Cui
- Department of Electronics and Nanoengineering, Aalto University, Espoo, 02150, Finland
| | - Ville Liljeström
- Nanomicroscopy Center, OtaNano, Aalto University, Espoo, 02150, Finland
| | - Volodymyr Dudko
- Bavarian Polymer Institute and Department of Chemistry, University of Bayreuth, D-95447, Bayreuth, Germany
| | - Jiali Sheng
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| | - Xiaoqi Cui
- Department of Electronics and Nanoengineering, Aalto University, Espoo, 02150, Finland
| | - Alexey P Tsapenko
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
- Department of Electronics and Nanoengineering, Aalto University, Espoo, 02150, Finland
| | - Josef Breu
- Bavarian Polymer Institute and Department of Chemistry, University of Bayreuth, D-95447, Bayreuth, Germany
| | - Zhipei Sun
- Department of Electronics and Nanoengineering, Aalto University, Espoo, 02150, Finland
| | - Qiang Zhang
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
- Honda Research Institute USA, Inc., San Jose, CA, 95134, USA
| | - Esko Kauppinen
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| | - Bo Peng
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| | - Olli Ikkala
- Department of Applied Physics, Aalto University, Espoo, 02150, Finland
| |
Collapse
|
3
|
Won D, Bang J, Choi SH, Pyun KR, Jeong S, Lee Y, Ko SH. Transparent Electronics for Wearable Electronics Application. Chem Rev 2023; 123:9982-10078. [PMID: 37542724 PMCID: PMC10452793 DOI: 10.1021/acs.chemrev.3c00139] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2023] [Indexed: 08/07/2023]
Abstract
Recent advancements in wearable electronics offer seamless integration with the human body for extracting various biophysical and biochemical information for real-time health monitoring, clinical diagnostics, and augmented reality. Enormous efforts have been dedicated to imparting stretchability/flexibility and softness to electronic devices through materials science and structural modifications that enable stable and comfortable integration of these devices with the curvilinear and soft human body. However, the optical properties of these devices are still in the early stages of consideration. By incorporating transparency, visual information from interfacing biological systems can be preserved and utilized for comprehensive clinical diagnosis with image analysis techniques. Additionally, transparency provides optical imperceptibility, alleviating reluctance to wear the device on exposed skin. This review discusses the recent advancement of transparent wearable electronics in a comprehensive way that includes materials, processing, devices, and applications. Materials for transparent wearable electronics are discussed regarding their characteristics, synthesis, and engineering strategies for property enhancements. We also examine bridging techniques for stable integration with the soft human body. Building blocks for wearable electronic systems, including sensors, energy devices, actuators, and displays, are discussed with their mechanisms and performances. Lastly, we summarize the potential applications and conclude with the remaining challenges and prospects.
Collapse
Affiliation(s)
- Daeyeon Won
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Junhyuk Bang
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Seok Hwan Choi
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Kyung Rok Pyun
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Seongmin Jeong
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Youngseok Lee
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Seung Hwan Ko
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
- Institute
of Engineering Research/Institute of Advanced Machinery and Design
(SNU-IAMD), Seoul National University, Seoul 08826, South Korea
| |
Collapse
|
4
|
Meng L, Wang W, Xu B, Qin J, Zhang K, Liu H. Solution-Processed Flexible Transparent Electrodes for Printable Electronics. ACS NANO 2023; 17:4180-4192. [PMID: 36826227 DOI: 10.1021/acsnano.2c10999] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Flexible transparent electrodes (FTEs) have been widely witnessed in various printable electronic devices, especially those involving light. So far, solution processes have demonstrated increasing advantages in preparing FTEs not only in their mild operation conditions and high-throughput but also in the diversity in micropatterning conductive nanomaterials into networks. For the FTEs, both high transparency and high conductivity are desirable, which therefore create requirements for the conductive network by considering the trade-off relationship between the coverage and the micropatterns of the network. In addition, the conductive networks also affect the flexibility of FTEs due to the deformation during bending/stretching. Consequently, solution processes capable of micropatterning conductive nanomaterials including nanoparticles, nanowires/polymers, and graphene/MXene play a crucial role in determining the performance of FTEs. Here, we reviewed recent research progress on solution-processed FTEs, including the solution processes, the solution-processable conductive nanomaterials and the substrates for making FTEs, and applications of FTEs in flexible electronics. Finally, we proposed several perspective outlooks of the FTEs, which aim at not only the enhanced performance but also the performances in extreme conditions and in integration. We believe that the review would offer inspiration for developing functional FTEs.
Collapse
Affiliation(s)
- Lili Meng
- Ji Hua Laboratory, Foshan 528000, Guangdong, P.R. China
- Research Institute for Frontier Science, Beihang University, Beijing 100191, P.R. China
| | - Wei Wang
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P.R. China
| | - Bojie Xu
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P.R. China
| | - Ji Qin
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P.R. China
| | - Kejie Zhang
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P.R. China
| | - Huan Liu
- Ji Hua Laboratory, Foshan 528000, Guangdong, P.R. China
- Research Institute for Frontier Science, Beihang University, Beijing 100191, P.R. China
| |
Collapse
|
5
|
Jiang Q, Wang F, Li R, Li B, Wei N, Gao N, Xu H, Zhao S, Huang Y, Wang B, Zhang W, Wu X, Zhang S, Zhao Y, Shi E, Zhang R. Synthesis of Ultralong Carbon Nanotubes with Ultrahigh Yields. NANO LETTERS 2023; 23:523-532. [PMID: 36622363 DOI: 10.1021/acs.nanolett.2c03858] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Ultralong carbon nanotubes (CNTs) are in huge demand in many cutting-edge fields due to their macroscale lengths, perfect structures, and extraordinary properties, while their practical application is limited by the difficulties in their mass production. Herein, we report the synthesis of ultralong CNTs with a dramatically increased yield by a simple but efficient substrate interception and direction strategy (SIDS), which couples the advantages of floating-catalyst chemical vapor deposition with the flying-kite-like growth mechanism of ultralong CNTs. The SIDS-assisted approach prominently improves the catalyst utilization and significantly increases the yield. The areal density of the ultralong CNT arrays with length of over 1 cm reached a record-breaking value of ∼6700 CNTs mm-1, which is 2-3 orders of magnitude higher than the previously reported values obtained by traditional methods. The SIDS provides a solution for synthesizing high-quality ultralong CNTs with high yields, laying the foundation for their mass production.
Collapse
Affiliation(s)
- Qinyuan Jiang
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Fei Wang
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Run Li
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Baini Li
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou 310024, People's Republic of China
| | - Nan Wei
- Research Center for Carbon-based Electronics and Department of Electronics, Peking University, Beijing 100871, People's Republic of China
| | - Ningfei Gao
- Beijing HuaTanYuanXin Electronics Technology Ltd. Co., Beijing 101399, People's Republic of China
| | - Haitao Xu
- Beijing HuaTanYuanXin Electronics Technology Ltd. Co., Beijing 101399, People's Republic of China
- Beijing Institute of Carbon-based Integrated Circuits, Beijing 100195, People's Republic of China
| | - Siming Zhao
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Ya Huang
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Baoshun Wang
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Wenshuo Zhang
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Xueke Wu
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Shiliang Zhang
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Yanlong Zhao
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| | - Enzheng Shi
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou 310024, People's Republic of China
| | - Rufan Zhang
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China
| |
Collapse
|
6
|
Jiao X, Shi C, Zhao Y, Xu L, Liu S, Hou PX, Liu C, Cheng HM. Efficient Fabrication of High-Quality Single-Walled Carbon Nanotubes and Their Macroscopic Conductive Fibers. ACS NANO 2022; 16:20263-20271. [PMID: 36475640 DOI: 10.1021/acsnano.2c05876] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
High-purity and well-graphitized single-walled carbon nanotubes (SWCNTs) with excellent physiochemical properties are ideal building blocks for the assembly of various CNT macrostructures for a wide range of applications. We report the preparation of high-quality SWCNTs on a large scale using a floating catalyst chemical vapor deposition (FCCVD) method. Under the optimum conditions, the conversion rate of the carbon source to SWCNTs reached 28.8%, and 20.4% of the metal nanoparticles were active for SWCNT growth, which are 15% and ∼400 times higher than those previously reported for FCCVD synthesis, respectively. As a result, the prepared SWCNTs have a very low residual catalyst content of ∼1.9 wt % and a high rapid oxidation temperature of 717 °C. Using these high-quality SWCNTs, we spun macroscopic SWCNT fibers by a wet-spinning process. The resulting fibers had a high electrical conductivity of 6.67 MS/m, which is 32% higher than the best value previously reported for SWCNT fibers.
Collapse
Affiliation(s)
- Xinyu Jiao
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
- School of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - Chao Shi
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
| | - Yiming Zhao
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
- School of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - Lele Xu
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
- School of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - Shaokang Liu
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
- School of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - Peng-Xiang Hou
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
- School of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - Chang Liu
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
- School of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, People's Republic of China
| | - Hui-Ming Cheng
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China
- Faculty of Materials Science and Engineering/Institute of Technology for Carbon Neutrality, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, People's Republic of China
| |
Collapse
|
7
|
Yin Z, Ding A, Zhang H, Zhang W. The Relevant Approaches for Aligning Carbon Nanotubes. MICROMACHINES 2022; 13:1863. [PMID: 36363883 PMCID: PMC9696039 DOI: 10.3390/mi13111863] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/06/2022] [Revised: 10/24/2022] [Accepted: 10/28/2022] [Indexed: 06/16/2023]
Abstract
Carbon-nanotube (CNT) is a promising material owing to its compelling mechanical, thermal and electrical properties and has been applied in a broad variety of fields such as composite, fiber, film and microelectronic. Although the introductions of CNT have brought huge improvement for many applications, these properties of macrostructures prepared by CNTs still cannot meet those of individual CNT. Disordered alignment of CNTs in the matrix results in degradation of performance and hinders further application. Nowadays, quantities of methods are being researched to realize alignments of CNTs. In this paper, we introduce the application of CNTs and review some typical pathways for vertical and horizontal alignment, including chemical vapor disposition, vertical self-assembly, external force, film assisted, electric field, magnetic field and printing. Besides that, advantages and disadvantages of specific methods are also discussed. We believe that these efforts will contribute to further understanding the nature of aligned CNT and generating more effective ideas to the relevant workers.
Collapse
Affiliation(s)
- Zhifu Yin
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, Shanghai 201620, China
- School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130000, China
| | - Ao Ding
- School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130000, China
| | - Hui Zhang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, Shanghai 201620, China
| | - Wang Zhang
- School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130000, China
| |
Collapse
|
8
|
Ilatovskii DA, Gilshtein EP, Glukhova OE, Nasibulin AG. Transparent Conducting Films Based on Carbon Nanotubes: Rational Design toward the Theoretical Limit. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2201673. [PMID: 35712777 PMCID: PMC9405519 DOI: 10.1002/advs.202201673] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2022] [Revised: 05/22/2022] [Indexed: 05/19/2023]
Abstract
Electrically conductive thin-film materials possessing high transparency are essential components for many optoelectronic devices. The advancement in the transparent conductor applications requires a replacement of indium tin oxide (ITO), one of the key materials in electronics. ITO and other transparent conductive metal oxides have several drawbacks, including poor flexibility, high refractive index and haze, limited chemical stability, and depleted raw material supply. Single-walled carbon nanotubes (SWCNTs) are a promising alternative for transparent conducting films (TCFs) because of their unique and excellent chemical and physical properties. Here, the latest achievements in the optoelectronic performance of TCFs based on SWCNTs are analyzed. Various approaches to evaluate the performance of transparent electrodes are briefly reviewed. A roadmap for further research and development of the transparent conductors using "rational design," which breaks the deadlock for obtaining the TCFs with a performance close to the theoretical limit, is also described.
Collapse
Affiliation(s)
- Daniil A. Ilatovskii
- Skolkovo Institute of Science and TechnologyNobel Str. 3Moscow143026Russian Federation
| | - Evgeniia P. Gilshtein
- Empa‐Swiss Federal Laboratories for Materials Science and TechnologyÜberlandstrasse 129Dübendorf8600Switzerland
| | - Olga E. Glukhova
- Saratov State UniversityAstrakhanskaya Str. 83Saratov410012Russian Federation
- I.M. Sechenov First Moscow State Medical UniversityBolshaya Pirogovskaya Str. 2–4Moscow119991Russian Federation
| | - Albert G. Nasibulin
- Skolkovo Institute of Science and TechnologyNobel Str. 3Moscow143026Russian Federation
- Aalto UniversityEspooFI‐00076Finland
| |
Collapse
|
9
|
Yin W, Huang Y, Lu M, Li D. A Cu nanoparticles‐assisted‐catalysis method enables controllably direct growth of graphene transparent conductive films on SiO2 nanospheres antireflection layer. Eur J Inorg Chem 2022. [DOI: 10.1002/ejic.202200160] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Wanying Yin
- East China Normal University School of Chemistry and Molecular Engineering CHINA
| | - Yue Huang
- East China Normal University School of Chemistry and Molecular Engineering CHINA
| | - Meng Lu
- East China Normal University School of Chemistry and Molecular Engineering CHINA
| | - Dezeng Li
- East China Normal University Department of Chemistry Room 425, Chemistry Building, No. 500 Dongchuan Road 200241 Shanghai CHINA
| |
Collapse
|
10
|
Self-assembly and photoinduced fabrication of conductive nanographene wires on boron nitride. Nat Commun 2022; 13:442. [PMID: 35064113 PMCID: PMC8782843 DOI: 10.1038/s41467-021-27600-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/03/2021] [Accepted: 11/17/2021] [Indexed: 11/12/2022] Open
Abstract
Manufacturing molecule-based functional elements directly at device interfaces is a frontier in bottom-up materials engineering. A longstanding challenge in the field is the covalent stabilization of pre-assembled molecular architectures to afford nanodevice components. Here, we employ the controlled supramolecular self-assembly of anthracene derivatives on a hexagonal boron nitride sheet, to generate nanographene wires through photo-crosslinking and thermal annealing. Specifically, we demonstrate µm-long nanowires with an average width of 200 nm, electrical conductivities of 106 S m−1 and breakdown current densities of 1011 A m−2. Joint experiments and simulations reveal that hierarchical self-assembly promotes their formation and functional properties. Our approach demonstrates the feasibility of combined bottom-up supramolecular templating and top-down manufacturing protocols for graphene nanomaterials and interconnects, towards integrated carbon nanodevices. The bottom-up fabrication of structures with robust performance in the nm-to-μm scale usable for integrated carbon nanodevices is challenging. Here the authors report micrometer-long, highly conducting nanographene wires following self-assembly, photo-crosslinking and thermal annealing of anthracene derivatives on hexagonal boron nitride sheets.
Collapse
|
11
|
Pang J, Bachmatiuk A, Yang F, Liu H, Zhou W, Rümmeli MH, Cuniberti G. Applications of Carbon Nanotubes in the Internet of Things Era. NANO-MICRO LETTERS 2021; 13:191. [PMID: 34510300 PMCID: PMC8435483 DOI: 10.1007/s40820-021-00721-4] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/24/2021] [Accepted: 08/11/2021] [Indexed: 05/07/2023]
Abstract
The post-Moore's era has boosted the progress in carbon nanotube-based transistors. Indeed, the 5G communication and cloud computing stimulate the research in applications of carbon nanotubes in electronic devices. In this perspective, we deliver the readers with the latest trends in carbon nanotube research, including high-frequency transistors, biomedical sensors and actuators, brain-machine interfaces, and flexible logic devices and energy storages. Future opportunities are given for calling on scientists and engineers into the emerging topics.
Collapse
Affiliation(s)
- Jinbo Pang
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy, Institute for Advanced Interdisciplinary Research (iAIR), Universities of Shandong, University of Jinan, Shandong, Jinan, 250022, People's Republic of China.
| | - Alicja Bachmatiuk
- PORT Polish Center for Technology Development, Łukasiewicz Research Network, Ul. Stabłowicka 147, 54-066, Wrocław, Poland
- Centre of Polymer and Carbon Materials, Polish Academy of Sciences, M. Curie-Sklodowskiej 34, 41-819, Zabrze, Poland
| | - Feng Yang
- Department of Chemistry, Southern University of Science and Technology, Shenzhen, 518055, People's Republic of China
| | - Hong Liu
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy, Institute for Advanced Interdisciplinary Research (iAIR), Universities of Shandong, University of Jinan, Shandong, Jinan, 250022, People's Republic of China
- State Key Laboratory of Crystal Materials, Center of Bio & Micro/Nano Functional Materials, Shandong University, 27 Shandanan Road, Jinan, 250100, People's Republic of China
| | - Weijia Zhou
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy, Institute for Advanced Interdisciplinary Research (iAIR), Universities of Shandong, University of Jinan, Shandong, Jinan, 250022, People's Republic of China
| | - Mark H Rümmeli
- College of Energy, Institute for Energy and Materials Innovations, Soochow University, Suzhou, Soochow, 215006, People's Republic of China
- Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, Soochow University, Suzhou, 215006, People's Republic of China
- Centre of Polymer and Carbon Materials, Polish Academy of Sciences, M. Curie Sklodowskiej 34, 41-819, Zabrze, Poland
- Institute for Complex Materials, Leibniz Institute for Solid State and Materials Research Dresden (IFW Dresden), 20 Helmholtz Strasse, 01069, Dresden, Germany
- Institute of Environmental Technology, VŠB-Technical University of Ostrava, 17. Listopadu 15, Ostrava, 708 33, Czech Republic
| | - Gianaurelio Cuniberti
- Institute for Materials Science and Max Bergmann Center of Biomaterials, Center for Advancing Electronics Dresden, Technische Universität Dresden, 01069, Dresden, Germany.
- Dresden Center for Computational Materials Science, Dresden Center for Intelligent Materials (GCL DCIM), Technische Universität Dresden, 01062, Dresden, Germany.
| |
Collapse
|
12
|
Shi J, Wang T, Han J, Liang Y, Tong Y, Li W. Fabrication of
MWCNT
S
‐functionalized
SA
pervaporation composite membranes to enhance esterification. J Appl Polym Sci 2021. [DOI: 10.1002/app.51573] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Affiliation(s)
- Jiayun Shi
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Taishan Wang
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Jie Han
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Yao Liang
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Yujia Tong
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Weixing Li
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| |
Collapse
|
13
|
In Silico Study of the Influence of Various Substrates on the Electronic Properties and Electrical Conductivity of Mono- and Bilayer Films of Armchair Single-Walled Carbon Nanotubes. CHEMENGINEERING 2021. [DOI: 10.3390/chemengineering5030048] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
We investigate electronic and electro-physical properties of mono- and bilayer armchair single-walled carbon nanotube (SWCNT) films located on substrates of different types, including substrates in the form of crystalline silicon dioxide (SiO2) films with P42/mnm and P3121 space symmetry groups. The SWCNT films interact with substrate only by van der Waals forces. The densities of electronic states (DOS) and the electron transmission functions are calculated for SWCNT films with various substrates. The electrical conductivity of SWCNT films is calculated based on the electron transmission function. It is found that the substrate plays an important role in the formation of DOS of the SWCNT films, and the surface topology determines the degree and nature of the mutual influence of the nanotube and the substrate. It is shown that the substrate affects the electronic properties of monolayer films, changing the electrical resistance value from 2% to 17%. However, the substrate has practically no effect on the electrical conductivity and resistance of the bilayer film in both directions of current transfer. In this case, the values of the resistances of the bilayer film in both directions of current transfer approach the value of ~6.4 kΩ, which is the lowest for individual SWCNT.
Collapse
|
14
|
Wu Y, Zhao X, Shang Y, Chang S, Dai L, Cao A. Application-Driven Carbon Nanotube Functional Materials. ACS NANO 2021; 15:7946-7974. [PMID: 33988980 DOI: 10.1021/acsnano.0c10662] [Citation(s) in RCA: 41] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2023]
Abstract
Carbon nanotube functional materials (CNTFMs) represent an important research field in transforming nanoscience and nanotechnology into practical applications, with potential impact in a wide realm of science, technology, and engineering. In this review, we combine the state-of-the-art research activities of CNTFMs with the application prospect, to highlight critical issues and identify future challenges. We focus on macroscopic long fibers, thin films, and bulk sponges which are typical CNTFMs in different dimensions with distinct characteristics, and also cover a variety of derived composite/hierarchical materials. Critical issues related to their structures, properties, and applications as robust conductive skeletons or high-performance flexible electrodes in mechanical and electronic devices, advanced energy conversion and storage systems, and environmental areas have been discussed specifically. Finally, possible solutions and directions are proposed for overcoming current obstacles and promoting future efforts in the field.
Collapse
Affiliation(s)
- Yizeng Wu
- School of Materials Science and Engineering, Peking University, Beijing 100871, People's Republic of China
| | - Xuewei Zhao
- School of Materials Science and Engineering, Peking University, Beijing 100871, People's Republic of China
| | - Yuanyuan Shang
- School of Physics and Microelectronics, Zhengzhou University, Zhengzhou, Henan 450001, People's Republic of China
| | - Shulong Chang
- School of Physics and Microelectronics, Zhengzhou University, Zhengzhou, Henan 450001, People's Republic of China
| | - Linxiu Dai
- School of Materials Science and Engineering, Peking University, Beijing 100871, People's Republic of China
| | - Anyuan Cao
- School of Materials Science and Engineering, Peking University, Beijing 100871, People's Republic of China
| |
Collapse
|
15
|
Yang Z, Lv X, Liu X, Jia S, Zhang Y, Yu Y, Zhang C, Liu D. Sieve-Like CNT Film Coupled with TiO 2 Nanowire for High-Performance Continuous-Flow Photodegradation of Rhodamine B under Visible Light Irradiation. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:1335. [PMID: 34069429 PMCID: PMC8159084 DOI: 10.3390/nano11051335] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/06/2021] [Revised: 05/13/2021] [Accepted: 05/14/2021] [Indexed: 01/14/2023]
Abstract
Continuous-flow photoreactors hold great promise for the highly efficient photodegradation of pollutants due to their continuity and sustainability. However, how to enable a continuous-flow photoreactor with the combined features of high photodegradation efficiency and durability as well as broad-wavelength light absorption and large-scale processing remains a significant challenge. Herein, we demonstrate a facile and effective strategy to construct a sieve-like carbon nanotube (CNT)/TiO2 nanowire film (SCTF) with superior flexibility (180° bending), high tensile strength (75-82 MPa), good surface wettability, essential light penetration and convenient visible light absorption. Significantly, the unique architecture, featuring abundant, well-ordered and uniform mesopores with ca. 70 µm in diameter, as well as a homogenous distribution of TiO2 nanowires with an average diameter of ca. 500 nm, could act as a "waterway" for efficient solution infiltration through the SCTF, thereby, enabling the photocatalytic degradation of polluted water in a continuous-flow mode. The optimized SCTF-2.5 displayed favorable photocatalytic behavior with 96% degradation of rhodamine B (RhB) within 80 min and a rate constant of 0.0394 min-1. The continuous-flow photodegradation device made using SCTF-2.5 featured exceptional photocatalytic behavior for the continuous degradation of RhB under simulated solar irradiation with a high degradation ratio (99.6%) and long-term stability (99.2% retention after working continuously for 72 h). This work sheds light on new strategies for designing and fabricating high-performance continuous-flow photoreactors toward future uses.
Collapse
Affiliation(s)
- Zhengpeng Yang
- Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China; (Z.Y.); (X.L.); (S.J.); (C.Z.)
| | - Xiaoting Lv
- Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China; (Z.Y.); (X.L.); (S.J.); (C.Z.)
- Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Advanced Materials Division, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China
| | - Xuqing Liu
- Department of Materials, The University of Manchester, Oxford Road, Manchester M13 9PL, UK;
| | - Shengmin Jia
- Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China; (Z.Y.); (X.L.); (S.J.); (C.Z.)
- Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Advanced Materials Division, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China
| | - Yongyi Zhang
- Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Advanced Materials Division, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China
- Jiangxi Key Lab of Carbonene Materials, Division of Nanomaterials, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Nanchang 330200, China
| | - Yingying Yu
- Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Advanced Materials Division, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China
| | - Chunjing Zhang
- Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China; (Z.Y.); (X.L.); (S.J.); (C.Z.)
| | - Dandan Liu
- Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Advanced Materials Division, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China
| |
Collapse
|