2D High-Entropy Transition Metal Dichalcogenides for Carbon Dioxide Electrocatalysis

Spatial Structure of Electron Interactions in High-entropy Oxide Nanoparticles for Active Electrocatalysis of Carbon Dioxide Reduction

High-entropy oxides (HEOs) exhibit distinctive catalytic properties owing to their diverse elemental compositions, garnering considerable attention across various applications. However, the preparation of HEO nanoparticles with different spatial structures remains challenging due to their inherent structural instability. Herein, ultrasmall high-entropy oxide nanoparticles (less than 5 nm) with different spatial structures are synthesized on carbon supports via the rapid thermal shock treatment. The low-symmetry HEO, BiSbInCdSn-O4, demonstrates exceptional performance for electrocatalytic carbon dioxide reaction (eCO2RR), including a lower overpotential, high Faraday efficiency across a wide electrochemical range (-0.3 to -1.6 V), and sustained stability for over100 h. In the membrane electrode assembly electrolyzer, BiSbInCdSn-O4 achieves a current density of 350 mA cm-2 while maintaining good stability for 24 h. Both experimental observations and theoretical calculations reveal that the electron donor-acceptor interactions between bismuth and indium sites in BiSbInCdSn-O4 enable the electron delocalization to facilitate the efficient adsorption of CO2 and hydrogenation reactions. Thus, the energy barrier of the rate-determining step is reduced to enhance the electrocatalytic activity and stability. This study elucidates that the spatial structure of metal sites in HEOs is able to regulate CO2 adsorption status for eCO2RR, paving the way for the rational design of efficient HEO catalysts.

Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage

Designing efficient and cost-effective materials is pivotal to solving the key scientific and technological challenges at the interface of energy, environment, and sustainability for achieving NetZero. Two-dimensional transition metal dichalcogenides (2D TMDs) represent a unique class of materials that have catered to a myriad of energy conversion and storage (ECS) applications. Their uniqueness arises from their ultra-thin nature, high fractions of atoms residing on surfaces, rich chemical compositions featuring diverse metals and chalcogens, and remarkable tunability across multiple length scales. Specifically, the rich electronic/electrical, optical, and thermal properties of 2D TMDs have been widely exploited for electrochemical energy conversion (e.g., electrocatalytic water splitting), and storage (e.g., anodes in alkali ion batteries and supercapacitors), photocatalysis, photovoltaic devices, and thermoelectric applications. Furthermore, their properties and performances can be greatly boosted by judicious structural and chemical tuning through phase, size, composition, defect, dopant, topological, and heterostructure engineering. The challenge, however, is to design and control such engineering levers, optimally and specifically, to maximize performance outcomes for targeted applications. In this review we discuss, highlight, and provide insights on the significant advancements and ongoing research directions in the design and engineering approaches of 2D TMDs for improving their performance and potential in ECS applications.

Unique Hierarchically Structured High-Entropy Alloys with Multiple Adsorption Sites for Rechargeable Li-CO2 Batteries with High Capacity

Lithium-carbon dioxide (Li-CO2) batteries offer the possibility of synchronous implementation of carbon neutrality and the development of advanced energy storage devices. The exploration of low-cost and efficient cathode catalysts is key to the improvement of Li-CO2 batteries. Herein, high-entropy alloys (HEAs)@C hierarchical nanosheet is synthesized from the simulation of the recycling solution of waste batteries to construct a cathode for the first time. Owing to the excellent electrical conductivity of the carbon material, the unique high-entropy effect of the HEAs, and the large number of catalytically active sites exposed by the hierarchical structure, the FeCoNiMnCuAl@C-based battery exhibits a superior discharge capability of 27664 mAh g-1 and outstanding durability of 134 cycles as well as low overpotential with 1.05 V at a discharge/recharge rate of 100 mA g-1. The adsorption capacity of different sites on the HEAs is deeply understood through density functional theory calculations combined with experiments. This work opens up the application of HEAs in Li-CO2 batteries catalytic cathodes and provides unique insights into the study of adsorption active sites in HEAs.

Atomic engineering of two-dimensional materials via liquid metals

Two-dimensional (2D) materials, known for their distinctive electronic, mechanical, and thermal properties, have attracted considerable attention. The precise atomic-scale synthesis of 2D materials opens up new frontiers in nanotechnology, presenting novel opportunities for material design and property control but remains challenging due to the high expense of single-crystal solid metal catalysts. Liquid metals, with their fluidity, ductility, dynamic surface, and isotropy, have significantly enhanced the catalytic processes crucial for synthesizing 2D materials, including decomposition, diffusion, and nucleation, thus presenting an unprecedented precise control over material structures and properties. Besides, the emergence of liquid alloy makes the creation of diverse heterostructures possible, offering a new dimension for atomic engineering. Significant achievements have been made in this field encompassing defect-free preparation, large-area self-aligned array, phase engineering, heterostructures, etc. This review systematically summarizes these contributions from the aspects of fundamental synthesis methods, liquid catalyst selection, resulting 2D materials, and atomic engineering. Moreover, the review sheds light on the outlook and challenges in this evolving field, providing a valuable resource for deeply understanding this field. The emergence of liquid metals has undoubtedly revolutionized the traditional nanotechnology for preparing 2D materials on solid metal catalysts, offering flexible possibilities for the advancement of next-generation electronics.

High-Entropy Materials in Electrocatalysis: Understanding, Design, and Development

Electrocatalysis is a crucial method for achieving global carbon neutrality, serving as an essential means of energy conversion, and electrocatalyst is crucial in the process of electrocatalysis. Because of the abundant active sites, the multi-component synergistic effect of high-entropy materials has a wide application prospect in the field of electrocatalysis. Moreover, due to the special structure of high-entropy materials, it is possible to obtain almost continuous adsorption energy distribution by regulating the composition, which has attracted extensive attention of researchers. This paper reviews the properties and types of high-entropy materials, including alloys and compounds. The synthesis strategies of high-entropy materials are systematically introduced, and the solid phase synthesis, liquid-phase synthesis, and gas-phase synthesis are classified and summarized. The application of high-entropy materials in electrocatalysis is summarized, and the promotion effect of high-entropy strategy in various catalytic reaction processes is summarized. Finally, the current progress of high-entropy materials, the problems encountered, and the future development direction are reviewed. It is emphasized that the strategy of high flux density functional theory calculation guiding high-entropy catalyst design will be of great significance to electrocatalysis.

Future prospects of high-entropy alloys as next-generation industrial electrode materials

The rapid advancement of electrochemical processes in industrial applications has increased the demand for high-performance electrode materials. High-entropy alloys (HEAs), a class of multicomponent alloys with unique properties, have emerged as potential electrode materials owing to their enhanced catalytic activity, superior stability, and tunable electronic structures. This review explores contemporary developments in HEA-based electrode materials for industrial applications and identifies their advantages and challenges as compared to conventional commercial electrode materials in industrial aspects. The importance of tuning the composition, crystal structure, different phase formations, thermodynamic and kinetic parameters, and surface morphology of HEAs and their derivatives to achieve the predicted electrochemical performance is emphasized in this review. Synthetic procedures for producing potential HEA electrode materials are outlined, and theoretical discussions provide a roadmap for recognizing the ideal electrode materials for specific electrochemical processes in an industrial setting. A comprehensive discussion and analysis of various electrochemical processes (HER, OER, ORR, CO2RR, MOR, AOR, and NRR) and electrochemical applications (batteries, supercapacitors, etc.) is included to appraise the potential ability of HEAs as an electrode material in the near future. Overall, the design and development of HEAs offer a promising pathway for advancing industrial electrode materials with improved performance, selectivity, and stability, potentially paving the way for the next generation of electrochemical technology.

Chemical Environment and Structural Variations in High Entropy Oxide Thin Film Probed with Electron Microscopy

We employ analytical transmission electron microscopy (TEM) to correlate the structural and chemical environment variations within a stacked epitaxial thin film of the high entropy oxide (HEO) Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O (J14), with two layers grown at different substrate temperatures (500 and 200 °C) using pulsed laser deposition (PLD). Electron diffraction and atomically resolved STEM imaging reveal the difference in out-of-plane lattice parameters in the stacked thin film, which is further quantified on a larger scale using four-dimensional STEM (4D-STEM). In the layer deposited at a lower temperature, electron energy loss spectroscopy (EELS) mapping indicates drastic changes in the oxidation states and bonding environment for Co ions, and energy-dispersive X-ray spectroscopy (EDX) mapping detects more significant cation deficiency. Ab initio density functional theory (DFT) calculations validate that vacancies on the cation sublattice of J14 result in significant electronic and structural changes. The experimental and computational analyses indicate that low temperatures during film growth result in cation deficiency, an altered chemical environment, and reduced lattice parameters while maintaining a single phase. Our results demonstrate that the complex correlation of configurational entropy, kinetics, and thermodynamics can be utilized for accessing a range of metastable configurations in HEO materials without altering cation proportions, enabling further engineering of functional properties of HEO materials.

Advances and challenges in the electrochemical reduction of carbon dioxide

The electrocatalytic carbon dioxide reduction reaction (ECO2RR) is a promising way to realize the transformation of waste into valuable material, which can not only meet the environmental goal of reducing carbon emissions, but also obtain clean energy and valuable industrial products simultaneously. Herein, we first introduce the complex CO2RR mechanisms based on the number of carbons in the product. Since the coupling of C-C bonds is unanimously recognized as the key mechanism step in the ECO2RR for the generation of high-value products, the structural-activity relationship of electrocatalysts is systematically reviewed. Next, we comprehensively classify the latest developments, both experimental and theoretical, in different categories of cutting-edge electrocatalysts and provide theoretical insights on various aspects. Finally, challenges are discussed from the perspectives of both materials and devices to inspire researchers to promote the industrial application of the ECO2RR at the earliest.

The Micron-Droplet-Confined Continuous-Flow Synthesis of Freestanding High-Entropy-Alloy Nanoparticles by Flame Spray Pyrolysis

Alloying multiple immiscible elements into a nanoparticle with single-phase solid solution structure (high-entropy-alloy nanoparticles, HEA-NPs) merits great potential. To date, various kinds of synthesis techniques of HEA-NPs are developed; however, a continuous-flow synthesis of freestanding HEA-NPs remains a challenge. Here a micron-droplet-confined strategy by flame spray pyrolysis (FSP) to achieve the continuous-flow synthesis of freestanding HEA-NPs, is proposed. The continuous precursor solution undergoes gas shearing and micro-explosion to form nano droplets which act as the micron-droplet-confined reactors. The ultrafast evolution (<5 ms) from droplets to <10 nm nanoparticles of binary to septenary alloys is achieved through thermodynamic and kinetic control (high temperature and ultrafast colling). Among them, the AuPtPdRuIr HEA-NPs exhibit excellent electrocatalytic performance for alkaline hydrogen evolution reaction with 23 mV overpotential to achieve 10 mA cm-2, which is twofold better than that of the commercial Pt/C. It is anticipated that the continuous-flow synthesis by FSP can introduce a new way for the continuous synthesis of freestanding HEA-NP with a high productivity rate.

Polyoxometallate Cluster Induced High-Entropy Oxide Sub-1 nm Nanosheets as Photoelectrocatalysts for Zn-Air Batteries

The lack of highly efficient and inexpensive catalysts severely hinders the large-scale application of Zn-air batteries (ZABs). High-entropy oxides (HEOs) exhibit unique structures and attractive properties; thus, they are promising to be used in ZABs. However, conventional high-temperature synthesis methods tend to obtain microscale HEOs with a lower exposure rate of active sites. Here, we report a facile solvothermal strategy for preparing two-dimensional (2D) HEO sub-1 nm nanosheets (SNSs) induced by polyoxometalate (POM) clusters. Taking advantage of the special 2D sub-1 nm structure and precise element regulation, these 2D HEOs-POM SNSs exhibit enhanced bifunctional oxygen evolution and oxygen reduction reaction activity under light irradiation. Further applying these 2D HEOs-POM SNSs to ZABs as cathode catalysts, the CoFeNiMnCuZnOx-phosphomolybdic acid SNSs-based ZABs deliver a low charge/discharge voltage gap of 0.25 V at 2 mA cm-2 under light irradiation. Meanwhile, it could maintain an ultralong-term stability for 1600 h at 2 mA cm-2 and 930 h at 10 mA cm-2. The 2D sub-1 nm structure and fine element control in HEOs provide opportunities to solve the problems of low intrinsic activity, limited active sites, and instability of air cathodes in ZABs.

Controllable Synthesis of Transferable Ultrathin Bi2Ge(Si)O5 Dielectric Alloys with Composition-Tunable High-κ Properties

Two-dimensional (2D) alloys hold great promise to serve as important components of 2D transistors, since their properties allow continuous regulation by varying their compositions. However, previous studies are mainly limited to the metallic/semiconducting ones as contact/channel materials, but very few are related to the insulating dielectrics. Here, we use a facile one-step chemical vapor deposition (CVD) method to synthesize ultrathin Bi2SixGe1-xO5 dielectric alloys, whose composition is tunable over the full range of x just by changing the relative ratios of the GeO2/SiO2 precursors. Moreover, their dielectric properties are highly composition-tunable, showing a record-high dielectric constant of >40 among CVD-grown 2D insulators. The vertically grown nature of Bi2GeO5 and Bi2SixGe1-xO5 enables polymer-free transfer and subsequent clean van der Waals integration as the high-κ encapsulation layer to enhance the mobility of 2D semiconductors. Besides, the MoS2 transistors using Bi2SixGe1-xO5 alloy as gate dielectrics exhibit a large Ion/Ioff (>108), ideal subthreshold swing of ∼61 mV/decade, and a small gate hysteresis (∼5 mV). Our work not only gives very few examples on controlled CVD growth of insulating dielectric alloys but also expands the family of 2D single-crystalline high-κ dielectrics.

Mixed Enthalpy-Entropy Descriptor for the Rational Design of Synthesizable High-Entropy Materials Over Vast Chemical Spaces

The practically unlimited high-dimensional composition space of high-entropy materials (HEMs) has emerged as an exciting platform for functional material design and discovery. However, the identification of stable and synthesizable HEMs and robust design rules remains a daunting challenge. Here, we propose a mixed enthalpy-entropy descriptor (MEED) that enables highly efficient, robust, high-throughput prediction of synthesizable HEMs across vast chemical spaces from first-principles. The MEED is based on two parameters: the relative formation enthalpy with respect to the most stable competing compound and the spread of the point-defect formation energy spectrum. The former measures the relative synthesizability of an HEM to its most stable competing phase, going beyond the conventional thermodynamic understanding. The latter gauges the relative entropy forming ability of an HEM, entailing no sampling over numerous alloy configurations. By applying the MEED to two structurally distinct representative material systems (i.e., 3D rocksalt carbides and 2D layered sulfides), we not only successfully identify all experimentally reported HEMs within these systems but also reveal a cutoff criterion for assessing their relative synthesizability within each system. By the MEED, tens of new high-entropy carbides and 2D high-entropy sulfides are also predicted, which have the potential for a wide variety of applications such as coating in aerospace devices, energy conversion and storage, and flexible electronics.

Atomically Substitutional Engineering of Transition Metal Dichalcogenide Layers for Enhancing Tailored Properties and Superior Applications

Transition metal dichalcogenides (TMDs) are a promising class of layered materials in the post-graphene era, with extensive research attention due to their diverse alternative elements and fascinating semiconductor behavior. Binary MX2 layers with different metal and/or chalcogen elements have similar structural parameters but varied optoelectronic properties, providing opportunities for atomically substitutional engineering via partial alteration of metal or/and chalcogenide atoms to produce ternary or quaternary TMDs. The resulting multinary TMD layers still maintain structural integrity and homogeneity while achieving tunable (opto)electronic properties across a full range of composition with arbitrary ratios of introduced metal or chalcogen to original counterparts (0-100%). Atomic substitution in TMD layers offers new adjustable degrees of freedom for tailoring crystal phase, band alignment/structure, carrier density, and surface reactive activity, enabling novel and promising applications. This review comprehensively elaborates on atomically substitutional engineering in TMD layers, including theoretical foundations, synthetic strategies, tailored properties, and superior applications. The emerging type of ternary TMDs, Janus TMDs, is presented specifically to highlight their typical compounds, fabrication methods, and potential applications. Finally, opportunities and challenges for further development of multinary TMDs are envisioned to expedite the evolution of this pivotal field.

Growth of Highly Oriented (VNbMoTaW)S2 Layers

Compositional tunability, an indispensable parameter for modifying the properties of materials, can open up new applications for van der Waals (vdW) layered materials such as transition-metal dichalcogenides (TMDCs). To date, multielement alloy TMDC layers are obtained via exfoliation from bulk polycrystalline powders. Here, we demonstrate direct deposition of high-entropy alloy disulfide, (VNbMoTaW)S2, layers with controllable thicknesses on free-standing graphene membranes and on bare and hBN-covered Al2O3(0001) substrates via ultra-high-vacuum reactive dc magnetron sputtering of the VNbMoTaW target in Kr and H2S gas mixtures. Using a combination of density functional theory calculations, Raman spectroscopy, X-ray diffraction, scanning transmission electron microscopy coupled with energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy, we determine that the as-deposited layers are single-phase, 2H-structured, and 0001-oriented (V0.10Nb0.16Mo0.19Ta0.28W0.27)S2.44. Our synthesis route is general and applicable for heteroepitaxial growth of a wide variety of TMDC alloys and potentially other multielement alloy vdW compounds with the desired compositions.

Optimization strategies of high-entropy alloys for electrocatalytic applications

High-entropy alloys (HEAs) are expected to become one of the most promising functional materials in the field of electrocatalysis due to their site-occupancy disorder and lattice order. The chemical complexity and component tunability make it possible for them to obtain a nearly continuous distribution of adsorption energy curve, which means that the optimal adsorption strength and maximum activity can be obtained by a multi-alloying strategy. In the last decade, a great deal of research has been performed on the synthesis, element selection and catalytic applications of HEAs. In this review, we focus on the analysis and summary of the advantages, design ideas and optimization strategies of HEAs in electrocatalysis. Combined with experiments and theories, the advantages of high activity and high stability of HEAs are explored in depth. According to the classification of catalytic reactions, how to design high-performance HEA catalysts is proposed. More importantly, efficient strategies for optimizing HEA catalysts are provided, including element regulation, defect regulation and strain engineering. Finally, we point out the challenges that HEAs will face in the future, and put forward some personal proposals. This work provides a deep understanding and important reference for electrocatalytic applications of HEAs.

Deposition of a high entropy thin film by aerosol-assisted chemical vapor deposition

Herein we report for the first time the synthesis of a high entropy (CuZnCoInGa)S metal sulfide thin film deposited by AACVD using molecular precursors.

Synthesis of High Entropy and Entropy-Stabilized Metal Sulfides and Their Evaluation as Hydrogen Evolution Electrocatalysts

High entropy metal chalcogenides are materials containing five or more elements within a disordered sublattice. These materials exploit a high configurational entropy to stabilize their crystal structure and have recently become an area of significant interest for renewable energy applications such as electrocatalysis and thermoelectrics. Herein, we report the synthesis of bulk particulate HE zinc sulfide analogues containing four, five, and seven metals. This was achieved using a molecular precursor cocktail approach with both transition and main group metal dithiocarbamate complexes which are decomposed simultaneously in a rapid (1 h) and low-temperature (500 °C) thermolysis reaction to yield high entropy and entropy-stabilized metal sulfides. The resulting materials were characterized by powder XRD, SEM, and TEM, alongside EDX spectroscopy at both the micro- and nano-scales. The entropy-stabilized (CuAgZnCoMnInGa)S material was demonstrated to be an excellent electrocatalyst for the hydrogen evolution reaction when combined with conducting carbon black, achieving a low onset overpotential of (∼80 mV) and η10 of (∼255 mV).

Synthetic Strategies toward High Entropy Materials: Atoms-to-Lattices for Maximum Disorder

High-entropy materials are a nascent class of materials that exploit a high configurational entropy to stabilize multiple elements in a single crystal lattice and to yield unique physical properties for applications in energy storage, catalysis, and thermoelectric energy conversion. Initially, the synthesis of these materials was conducted by approaches requiring high temperatures and long synthetic time scales. However, successful homogeneous mixing of elements at the atomic level within the lattice remains challenging, especially for the synthesis of nanomaterials. The use of atom-up synthetic approaches to build crystal lattices atom by atom, rather than the top-down alteration of extant crystalline lattices, could lead to faster, lower-temperature, and more sustainable approaches to obtaining high entropy materials. In this Perspective, we discuss some of these state-of-the-art atom-up synthetic approaches to high entropy materials and contrast them with more traditional approaches.

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries

Solid-state electrolytes (SSEs) are crucial to high-energy-density lithium metal batteries, but they commonly suffer from slow Li+ transfer kinetics and low mechanical strength, severely hampering the application for all-solid-state batteries. Here, we develop a two-dimensional (2D) high-entropy lithium-ion conductor, lithium-containing transition-metal phosphorus sulfide, HE-LixMPS3 (Lix(Fe1/5Co1/5Ni1/5Mn1/5Zn1/5)PS3) with five transition-metal atoms and lithium ions (Li+) dispersed into [P2S6]2- framework layers, exhibiting high lattice distortions and a large amount of cation vacancies. Such unique features enable to efficiently accelerate the migration of Li+ in 2D [P2S6]2- interlamination, delivering a high ionic conductivity of 5 × 10-4 S cm-1 at room temperature. Moreover, the HE-LixMPS3 laminate can be employed as a building block to construct an ultrathin SSE film (∼10 μm) based on strong C-S bonding between HE-LixMPS3 and nitrile-butadiene rubber. The SSE film delivers a strong mechanical robustness (6.0 MPa, 310% elongation) and a high ionic conductivity of 4 × 10-4 S cm-1, showing a long cycle stability of 800 h in lithium symmetric cells. Coupled with LiFePO4 cathode and lithium anode, the all-solid-state battery presents a high Coulombic efficiency of 99.8% within 2000 cycles at 5.0 C.

Alloy Catalysts for Electrocatalytic CO2 Reduction

CO2 conversion is an anticipated route to resolve the energy crisis and environmental pollution, in which electrocatalysis is one of the technologies closest to industrialization. Alloy catalysts are promising candidates for electrocatalysis, and the high tenability in electronic structures and surface physical and chemical properties allows alloy catalysts high catalytic activity and selectivity for electrocatalytic CO2 reduction. Herein, the recent advances in alloy catalysts for electrocatalytic CO2 reduction have been systematically summarized, with insight into the structure of the active center, catalytic performance, and mechanism, to uncover the key to their high catalytic performance. The alloy catalysts are mainly classified as binary and multi-metallic alloys (medium entropy and high entropy alloy) based on components and mixed configuration entropy, on which the relationship among the active center, catalytic performance, and mechanism has been fully discussed to inspire the rational design of alloy catalysts. Finally, the current challenges and future perspectives are presented to propose the dilemma and development direction for alloy catalysts. This review provides an overview of about the recent progress and future development of alloy catalysts to present a guideline for future research work on relevant catalysts.

Perforated Carbon Nanotube Film Assisted Growth of Uniform Monolayer MoS2

Scaling up the chemical vapor deposition (CVD) of monolayer transition metal dichalcogenides (TMDCs) is in high demand for practical applications. However, for CVD-grown TMDCs on a large scale, there are many existing factors that result in their poor uniformity. In particular, gas flow, which usually leads to inhomogeneous distributions of precursor concentrations, has yet to be well controlled. In this work, the growth of uniform monolayer MoS₂ on a large scale by the delicate control of gas flows of precursors, which is realized by vertically aligning a well-designed perforated carbon nanotube (p-CNT) film face-to-face with the substrate in a horizontal tube furnace, is achieved. The p-CNT film releases gaseous Mo precursor from the solid part and allows S vapor to pass through the hollow part, resulting in uniform distributions of both gas flow rate and precursor concentrations near the substrate. Simulation results further verify that the well-designed p-CNT film guarantees a steady gas flow and a uniform spatial distribution of precursors. Consequently, the as-grown monolayer MoS₂ shows quite good uniformity in geometry, density, structure, and electrical properties. This work provides a universal pathway for the synthesis of large-scale uniform monolayer TMDCs, and will advance their applications in high-performance electronic devices.

Pressure-Stabilized High-Entropy (FeCoNiCuRu)S2 Sulfide Anode toward Simultaneously Fast and Durable Lithium/Sodium Ion Storage

Pressure-stabilized high-entropy sulfide (FeCoNiCuRu)S₂ (HES) is proposed as an anode material for fast and long-term stable lithium/sodium storage performance (over 85% retention after 15 000 cycles @10 A g^-1 ). Its superior electrochemical performance is strongly related to the increased electrical conductivity and slow diffusion characteristics of entropy-stabilized HES. The reversible conversion reaction mechanism, investigated by ex-situ XRD, XPS, TEM, and NMR, further confirms the stability of the host matrix of HES after the completion of the whole conversion process. A practical demonstration of assembled lithium/sodium capacitors also confirms the high energy/power density and long-term stability (retention of 92% over 15 000 cycles @5 A g^-1 ) of this material. The findings point to a feasible high-pressure route to realize new high-entropy materials for optimized energy storage performance.

A Low-Temperature Synthetic Route Toward a High-Entropy 2D Hexernary Transition Metal Dichalcogenide for Hydrogen Evolution Electrocatalysis

High-entropy (HE) metal chalcogenides are a class of materials that have great potential in applications such as thermoelectrics and electrocatalysis. Layered 2D transition-metal dichalcogenides (TMDCs) are a sub-class of high entropy metal chalcogenides that have received little attention to date as their preparation currently involves complicated, energy-intensive, or hazardous synthetic steps. To address this, a low-temperature (500 °C) and rapid (1 h) single source precursor approach is successfully adopted to synthesize the hexernary high-entropy metal disulfide (MoWReMnCr)S₂ . (MoWReMnCr)S₂ powders are characterized by powder X-ray diffraction (pXRD) and Raman spectroscopy, which confirmed that the material is comprised predominantly of a hexagonal phase. The surface oxidation states and elemental compositions are studied by X-ray photoelectron spectroscopy (XPS) whilst the bulk morphology and elemental stoichiometry with spatial distribution is determined by scanning electron microscopy (SEM) with elemental mapping information acquired from energy-dispersive X-ray (EDX) spectroscopy. The bulk, layered material is subsequently exfoliated to ultra-thin, several-layer 2D nanosheets by liquid-phase exfoliation (LPE). The resulting few-layer HE (MoWReMnCr)S₂ nanosheets are found to contain a homogeneous elemental distribution of metals at the nanoscale by high angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) with EDX mapping. Finally, (MoWReMnCr)S₂ is demonstrated as a hydrogen evolution electrocatalyst and compared to 2H-MoS₂ synthesized using the molecular precursor approach. (MoWReMnCr)S₂ with 20% w/w of high-conductivity carbon black displays a low overpotential of 229 mV in 0.5 M  H₂ SO₄ to reach a current density of 10 mA cm^-2 , which is much lower than the overpotential of 362 mV for MoS₂ . From density functional theory calculations, it is hypothesised that the enhanced catalytic activity is due to activation of the basal plane upon incorporation of other elements into the 2H-MoS₂ structure, in particular, the first row TMs Cr and Mn.

Progress in electrocatalytic hydrogen evolution of transition metal alloys: synthesis, structure, and mechanism analysis

At present, the problems of high energy consumption and low efficiency in electrocatalytic hydrogen production have limited the large-scale industrial application of this technology. Constructing effective catalysts has become the way to solve these problems. Transition metal alloys have been proved to be very promising materials in hydrogen evaluation reaction (HER). In this study, the related theories and characterization methods of electrocatalysis are summarized, and the latest progress in the application of binary, ternary, and high entropy alloys to HER in recent years is analyzed and studied. The synthesis methods and optimization strategies of transition metal alloys, including composition regulation, hybrid engineering, phase engineering, and morphological engineering were emphatically discussed, and the principles and performance mechanism analysis of these strategies were discussed in detail. Although great progress has been made in alloy catalysts, there is still considerable room for applications. Finally, the challenges, prospects, and research directions of transition metal alloys in the future were predicted.

Composition-Tuned (MoWV)Se2 Ternary Alloy Nanosheets as Excellent Hydrogen Evolution Reaction Electrocatalysts

Ternary alloying of transition metal dichalcogenides (TMDs) has the potential for altering the electronic structure of materials to suit electrochemical applications. Herein, we synthesized (MoWV)Se₂ nanosheets at various compositions via a colloidal reaction. The mole fraction of V atoms (x_V) was successfully increased up to 0.8, producing a metallic phase that is highly durable against hydration. Furthermore, we synthesized (MoW)Se₂ nanosheets over the entire composition range. The atomic mixing of the ternary alloys is more random than that of the constitutional binary alloys, as supported by first-principles calculations. Compared to binary alloying, ternary alloying more effectively enhanced the electrocatalytic activity for acidic hydrogen evolution reaction (HER). The HER performance increased upon increasing x_V to 0.44, and thereafter, it declined at higher x_V primarily owing to surface oxidation. The analysis of Gibbs free energy for H adsorption revealed that ternary alloying strongly activates the basal plane for the HER. VSe₂ contains numerous sites favorable for H adsorption, facilitating the composition-dependent HER. These results provide a pioneering strategy for designing multicomponent TMD catalysts that maximize the advantages of each component.

Designing strategies and enhancing mechanism for multicomponent high-entropy catalysts

High-entropy materials (HEMs) are new-fashioned functional materials in the field of catalysis owing to their large designing space, tunable electronic structure, interesting "cocktail effect", and entropy stabilization effect. Many effective strategies have been developed to design advanced catalysts for various important reactions. Herein, we firstly review effective strategies developed so far for optimizing HEM-based catalysts and the underlying mechanism revealed by both theoretical simulations and experimental aspects. In light of this overview, we subsequently present some perspectives about the development of HEM-based catalysts and provide some serviceable guidelines and/or inspiration for further studying multicomponent catalysts.

2D Transition Metal Dichalcogenide with Increased Entropy for Piezoelectric Electronics

Piezoelectricity in 2D transition metal dichalcogenides (TMDs) has attracted considerable interest because of their excellent flexibility and high piezoelectric coefficient compared to conventional piezoelectric bulk materials. However, the ability to regulate the piezoelectric properties is limited because the entropy is constant for certain binary TMDs other than multielement ones. Herein, in order to increase the entropy, a ternary TMDs alloy, Mo_{1- x} W_x S₂ , with different W concentrations, is synthesized. The W concentration in the Mo_{1- x} W_x S₂ alloy can be controlled precisely in the low-supersaturation synthesis and the entropy can be tuned accordingly. The Mo_0.46 W_0.54 S₂ alloy (x = 0.54) has the highest configurational entropy and best piezoelectric properties, such as a piezoelectric coefficient of 4.22 pm V^-1 and a piezoelectric output current of 150 pA at 0.24% strain. More importantly, it can be combined into a larger package to increase the output current to 600 pA to cater to self-powered applications. Combining with excellent mechanical durability, a mechanical sensor based on the Mo_0.46 W_0.54 S₂ alloy is demonstrated for real-time health monitoring.

Quantum Confined High-Entropy Lanthanide Oxysulfide Colloidal Nanocrystals

We have synthesized the first reported example of quantum confined high-entropy (HE) nanoparticles, using the lanthanide oxysulfide, Ln2SO2, system as the host phase for an equimolar mixture of Pr, Nd, Gd, Dy, and Er. A uniform HE phase was achieved via the simultaneous thermolysis of a mixture of lanthanide dithiocarbamate precursors in solution. This was confirmed by powder X-ray diffraction and high-resolution scanning transmission electron microscopy, with energy dispersive X-ray spectroscopic mapping confirming the uniform distribution of the lanthanides throughout the particles. The nanoparticle dispersion displayed a significant blue shift in the absorption and photoluminescence spectra relative to our previously reported bulk sample with the same composition, with an absorption edge at 330 nm and a λmax at 410 nm compared to the absorption edge at 500 nm and a λmax at 450 nm in the bulk, which is indicative of quantum confinement. We support this postulate with experimental and theoretical analysis of the bandgap energy as a function of strain and surface effects (ligand binding) as well as calculation of the exciton Bohr radiii of the end member compounds.

High Entropy van der Waals Materials

By breaking the restrictions on traditional alloying strategy, the high entropy concept has promoted the exploration of the central area of phase space, thus broadening the horizon of alloy exploitation. This review highlights the marriage of the high entropy concept and van der Waals systems to form a new family of materials category, namely the high entropy van der Waals materials (HEX, HE = high entropy, X = anion clusters) and describes the current issues and next challenges. The design strategy for HEX has integrated the local feature (e.g., composition, spin, and valence states) of structural units in high entropy materials and the holistic degrees of freedom (e.g., stacking, twisting, and intercalating species) in van der Waals materials, and is successfully used for the discovery of high entropy dichalcogenides, phosphorus tri-chalcogenides, halogens, and MXene. The rich combination and random distribution of the multiple metallic constituents on the nearly regular 2D lattice give rise to a flexible platform to study the correlation features behind a range of selected physical properties, e.g., superconductivity, magnetism, and metal-insulator transition. The deliberate design of structural units and their stacking configuration can also create novel catalysts to enhance their performance in a bunch of chemical reactions.

MoSe2 -VSe2 -NbSe2 Ternary Alloy Nanosheets to Boost Electrocatalytic Hydrogen Evolution Reaction

Alloying of transition metal dichalcogenides (TMDs) is a pioneering method for engineering electronic structures with expanded applications. In this study, MoSe₂ -VSe₂ -NbSe₂ ternary alloy nanosheets are synthesized via a colloidal reaction. The composition is successfully tuned over a wide range to adjust the 2H-1T phase transition. The alloy nanosheets consist of miscible atomic structures at all compositions, which is distinct from immiscible binary alloys. Compared to each binary alloy, the ternary alloys display higher electrocatalytic activity toward the hydrogen evolution reaction (HER) in an acidic electrolyte. The HER performance exhibits a volcano-type composition dependence, which is correlated with the experimental d-band center (ε_d ). Spin-polarized density functional theory (DFT) calculations consistently predict the homogenous atomic distributions. The Gibbs free energy of H adsorption (ΔG_H* ) and the activation barrier (E_a ) support that miscible ternary alloying greatly enhances the HER performance.

Full Composition Tuning of W1-xNbxSe2 Alloy Nanosheets to Promote the Electrocatalytic Hydrogen Evolution Reaction

Composition modulation of transition metal dichalcogenides is an effective way to engineer their crystal/electronic structures for expanded applications. Here, fully composition-tuned W_1-xNb_xSe₂ alloy nanosheets were produced via colloidal synthesis. These nanosheets ultimately exhibited a notable transition between WSe₂ and NbSe₂ hexagonal phases at x = 0.6. As x approaches 0.6, point doping is converted into cluster doping and eventually separated domains of WSe₂ and NbSe₂. Extensive density functional theory calculations predicted the composition-dependent crystal structures and phase transitions, consistently with the experiments. The electrocatalytic activity for the hydrogen evolution reaction (HER) in acidic electrolyte was significantly enhanced at x = 0.2, which was linked with the d-band center. The Gibbs free energy for the H adsorption at various basal and edge sites supported the enhanced HER performance of the metallic alloy nanosheets. We suggested that the dispersed doping structures of Nb atoms resulted in the best HER performance. Our findings highlight the significance of composition tuning in enhancing the catalytic activity of alloys.

Stabilization of Multicationic Redox Chemistry in Polyanionic Cathode by Increasing Entropy

Polyanionic compounds have large compositional flexibility, which creates a growing interest in exploring the property limits of electrode materials of rechargeable batteries. The realization of multisodium storage in the polyanionic electrodes can significantly improve capacity of the materials, but it often causes irreversible capacity loss and crystal phase evolution, especially under high-voltage operation, which remain important challenges for their application. Herein, it is shown that the multisodium storage in the polyanionic cathode can be enhanced and stabilized by increasing the entropy of the polyanionic host structure. The obtained polyanionic Na3.4 Fe0.4 Mn0.4 V0.4 Cr0.4 Ti0.4 (PO4 )3 cathode exhibits multicationic redox property to achieve high capacity with good reversibility under the high voltage of 4.5 V (vs Na/Na+ ). Exploring the underlying mechanism through operando characterizations, a stable trigonal phase with reduced volume change during the multisodium storage process is disclosed. Besides, the enhanced performance of the HE material also derives from the synergistic effect of the diverse TM species with suitable molarity. These results reveal the effectiveness of high-entropy concept in expediting high-performance polyanionic cathodes discovery.

WSe2-VSe2 Alloyed Nanosheets to Enhance the Catalytic Performance of Hydrogen Evolution Reaction

Tuning the electronic structures of transition metal dichalcogenides (TMD) is essential for their implementation in next-generation energy technologies. In this study, we synthesized composition-tuned WSe₂-VSe₂ (W_1-xV_xSe₂, x = 0-1) alloyed nanosheets using a colloidal reaction. Alloying the semiconducting WSe₂ with VSe₂ converts the material into a metallic one, followed by a 2H-to-1T phase transition at x = 0.7. Over a wide composition range, WSe₂ and VSe₂ are atomically immiscible and form separate ordered domains. The miscible alloy at x = 0.1 displayed enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) in an acidic electrolyte. This trend was correlated with the d-band center via a volcano-type relationship. Spin-polarized density functional theory calculations consistently predicted the atomic immiscibility, which became more significant at the 2H-1T phase transition composition. The Gibbs free energy of H adsorption on the basal planes (Se or hole sites) and the activation barriers along the Volmer-Heyrovsky reaction pathway supported the enhanced HER performance of the alloy phase, suggesting that the dispersed V-doped structures were responsible for the best HER catalytic activity. Our study demonstrates how the atomic structure of TMD alloy nanosheets plays a crucial role in enhancing catalytic activity.

Highly efficient oxygen evolution reaction enabled by phosphorus-boron facilitating surface reconstruction of amorphous high-entropy materials

Efficient, cost-effective and durable electrocatalysts are highly required to overcome the slow kinetics and high overpotential of oxygen evolution reaction (OER). Here we report a series of novel amorphous high-entropy borophosphate catalysts FeCoNiMBPO_x (M = Mg, Al, Cr, Mn) prepared by a low-temperature reduction method. The leaching of boron and phosphorus accelerates the surface self-reconstruction of FeCoNiMnBPO_x, and the subsequently formed high-oxidation-state metal-OOH species is beneficial to improve the catalyst performance. Moreover, the unique amorphous structure with abundant defects provides more active sites for OER. As a return, all the samples exhibit excellent OER activity and stability. Among them, FeCoNiMnBPO_x with the highest conductivity and the largest electrochemical active surface area (ECSA) exhibits the best electrocatalytic performance, requiring only low overpotentials of 248 mV and 294 mV to reach current densities of 10 mA cm^-2 and 100 mA cm^-2, respectively. This sample also shows an exceptional durability for 50 h without a significant increase in potential, which is superior to that of the benchmark RuO₂ electrocatalyst. The combination of the adsorbate evolution mechanism (AEM) and the lattice oxygen-mediated mechanism (LOM) are responsible for the excellent catalyst performance. This work provides new ideas for designing high-activity multiple-element catalysts.

Short-Range Diffusion Enables General Synthesis of Medium-Entropy Alloy Aerogels

Medium-entropy alloy aerogels (MEAAs) with the advantages of both multimetallic alloys and aerogels are promising new materials in catalytic applications. However, limited by the immiscible behavior of different metals, achieving single-phase MEAAs is still a grand challenge. Herein, a general strategy for preparing ultralight 3D porous MEAAs with the lowest density of 39.3 mg cm^-3 among the metal materials is reported, through combining auto-combustion and subsequent low-temperature reduction procedures. The homogenous mixing of precursors at the ionic level makes the short-range diffusion of metal atoms possible to drive the formation of single-phase MEAAs. As a proof of concept in catalysis, as-synthesized Ni₅₀ Co₁₅ Fe₃₀ Cu₅ MEAAs exhibit a high mass activity of 1.62 A mg^-1 and specific activity of 132.24 mA cm^-2 toward methanol oxidation reactions, much higher than those of the low-entropy counterparts. In situ Fourier transform infrared and NMR spectroscopies reveal that MEAAs can enable highly selective conversion of methanol to formate. Most importantly, a methanol-oxidation-assisted MEAAs-based water electrolyzer can achieve a low cell voltage of 1.476 V at 10 mA cm^-2 for making value-added formate at the anode and H₂ at the cathode, 173 mV lower than that of traditional alkaline water electrolyzers.

Bottom-up synthesis of 2D layered high-entropy transition metal hydroxides

Low-dimensional high-entropy materials, such as nanoparticles and two-dimensional (2D) layers, have great potential for catalysis and energy applications. However, it is still challenging to synthesize 2D layered high-entropy materials through a bottom-up soft chemistry method, due to the difficulty of mixing and assembling multiple elements in 2D layers. Here, we report a simple polyol process for the synthesis of a series of 2D layered high-entropy transition metal (Co, Cr, Fe, Mn, Ni, and Zn) hydroxides (HEHs), involving the hydrolysis and inorganic polymerization of metal-containing species in ethylene glycol media. The as-synthesized HEHs demonstrate 2D layered structures with interlayer distances ranging from 0.860 to 0.987 nm and homogeneous elemental distribution of designed equimolar stoichiometry in the layers. These 2D HEHs exhibit a low overpotential of 275 mV at 10 mA cm-2 in a 0.1 M KOH electrolyte for the oxygen evolution reaction. Superparamagnetic spinel-type high-entropy nanoparticles can also be obtained by annealing these HEHs. Our polyol approach creates opportunities for synthesizing low-dimensional high-entropy materials with promising properties and applications.

Equilibrium phase diagrams of isostructural and heterostructural two-dimensional alloys from first principles

Alloying is a successful strategy for tuning the phases and properties of two-dimensional (2D) transition metal dichalcogenides (TMDCs). To accelerate the synthesis of TMDC alloys, we present a method for generating temperature-composition equilibrium phase diagrams by combining first-principles total-energy calculations with thermodynamic solution models. This method is applied to three representative 2D TMDC alloys: an isostructural alloy, MoS_2(1-x)Te_2x , and two heterostructural alloys, Mo_1-x W _x Te₂ and WS_2(1-x)Te_2x . Using density-functional theory and special quasi-random structures, we show that the mixing enthalpy of these binary alloys can be reliably represented using a sub-regular solution model fitted to the total energies of relatively few compositions. The cubic sub-regular solution model captures 3-body effects that are important in TMDC alloys. By comparing phase diagrams generated with this method to those calculated with previous methods, we demonstrate that this method can be used to rapidly design phase diagrams of TMDC alloys and related 2D materials.

High-entropy nanoparticles: Synthesis-structure-property relationships and data-driven discovery

High-entropy nanoparticles have become a rapidly growing area of research in recent years. Because of their multielemental compositions and unique high-entropy mixing states (i.e., solid-solution) that can lead to tunable activity and enhanced stability, these nanoparticles have received notable attention for catalyst design and exploration. However, this strong potential is also accompanied by grand challenges originating from their vast compositional space and complex atomic structure, which hinder comprehensive exploration and fundamental understanding. Through a multidisciplinary view of synthesis, characterization, catalytic applications, high-throughput screening, and data-driven materials discovery, this review is dedicated to discussing the important progress of high-entropy nanoparticles and unveiling the critical needs for their future development for catalysis, energy, and sustainability applications.

Design of Hierarchical Porosity Via Manipulating Chemical and Microstructural Complexities in High-Entropy Alloys for Efficient Water Electrolysis

Achieving a porous architecture with multiple-length scales and utilizing the synergetic effects of multicomponent chemicals bring up new opportunities for further improving the electrocatalytic performance of nanocatalysts. Herein, the synthesis of a self-supported hierarchical porous electrocatalyst based on a high-entropy alloy (HEA) containing multiple transitional metals via physical metallurgy and dealloying strategies is reported. Microscale phase separation and nanoscale spinodal decomposition are modulated in a highly concentrated FeCoNiCu HEA, which makes it possible to obtain a porous structure with different length scales, i.e., relatively large porous channels formed by removing one separated phase and ultrafine mesopores obtained from leaching out one decomposition phase. The resultant hierarchical porous HEA exhibits superior water splitting performance, which takes full advantage of the enlarged surface area offered by the bi-continuous mesoporous structure with the exceptional intrinsic reactivity originating from the synergetic electronic effects of the different components in alloying. Moreover, the microscale porous structure plays an important role in the significantly improved mass transportation, as well as the durability during electrocatalysis. This effective strategy that simultaneously utilizes the chemical and microstructural advantages of HEAs opens up a new avenue for developing HEA-based, high-performance porous electrocatalysts for various energy conversion/store applications.

Two-Dimensional High-Entropy Metal Phosphorus Trichalcogenides for Enhanced Hydrogen Evolution Reaction

Developing earth-abundant and highly effective electrocatalysts for hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. Two-dimensional (2D) high-entropy metal phosphorus trichalcogenides (MPCh₃) have the advantages of both near-continuous adsorption energies of high-entropy alloys (HEAs) and large specific surface area of 2D materials, which are excellent catalytic platforms. As a typical 2D high-entropy catalyst, Co_0.6(VMnNiZn)_0.4PS₃ nanosheets with high-concentration active sites are successfully demonstrated to show enhanced HER performance: an overpotential of 65.9 mV at a current density of 10 mA cm^-2 and a Tafel slope of 65.5 mV dec^-1. Decent spectroscopy characterizations are combined with density function theory analyses to show the scenario for the enhancement mechanism by a high-entropy strategy. The optimized S sites on the edge and P sites on the basal plane provide more active sites for hydrogen adsorption, and the introduced Mn sites boost water dissociation during the Volmer step. Two-dimensional high-entropy MPCh₃ provides an avenue for the combination of HEAs and 2D materials to enhance the HER performance, which also provides an alternative materials platform to explore and design superior catalysts for various electrochemical systems.

Polytypic Phase Transition of Nb1-xVxSe2 via Colloidal Synthesis and Their Catalytic Activity toward Hydrogen Evolution Reaction

Polytypes of two-dimensional transition metal dichalcogenide can extend the architecture and application of nanostructures. Herein, Nb_1-xV_xSe₂ alloy nanosheets in the full composition range (x) were synthesized by a colloidal reaction. At x = 0.1-0.3, a phase transition occurred from various hexagonal (three 2H and one 4H types) phase NbSe₂ to an atomically homogeneous 1T phase VSe₂. Density functional theory calculations also revealed a polytypic phase transition at x = 0.3, which was shifted close to 0 in the presence of Se vacancies. Furthermore, the calculations validate favorable formation of Se vacancies at the phase transition. The sample at x = 0.3 exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) in 0.5 M H₂SO₄. The Gibbs free energy indicates that the catalytic HER performance is correlated with the active Se vacancy sites of polytypic structures.

High Entropy Metal Chalcogenides: Synthesis, Properties, Applications and Future Directions

Metal oxides, sulphides, selenides and tellurides have routinely been investigated and utilised for a wide range of applications, in particular in the areas of energy (photovoltaic, thermoelectric) and catalysis (thermocatalysis,...

In situ growth of an Fe-doped NiCo-MOF electrocatalyst from layered double hydroxide effectively enhances electrocatalytic oxygen evolution performance

The hierarchical book-like Fe-NiCo-MOF exhibits superior OER performance coupled with outstanding stability at a high current density.