1
|
Kuang C, Chen S, Luo M, Zhang Q, Sun X, Han S, Wang Q, Stanishev V, Darakchieva V, Crispin R, Fahlman M, Zhao D, Wen Q, Jonsson MP. Switchable Broadband Terahertz Absorbers Based on Conducting Polymer-Cellulose Aerogels. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2305898. [PMID: 37997181 PMCID: PMC10797431 DOI: 10.1002/advs.202305898] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2023] [Revised: 10/18/2023] [Indexed: 11/25/2023]
Abstract
Terahertz (THz) technologies provide opportunities ranging from calibration targets for satellites and telescopes to communication devices and biomedical imaging systems. A main component will be broadband THz absorbers with switchability. However, optically switchable materials in THz are scarce and their modulation is mostly available at narrow bandwidths. Realizing materials with large and broadband modulation in absorption or transmission forms a critical challenge. This study demonstrates that conducting polymer-cellulose aerogels can provide modulation of broadband THz light with large modulation range from ≈ 13% to 91% absolute transmission, while maintaining specular reflection loss < -30 dB. The exceptional THz modulation is associated with the anomalous optical conductivity peak of conducting polymers, which enhances the absorption in its oxidized state. The study also demonstrates the possibility to reduce the surface hydrophilicity by simple chemical modifications, and shows that broadband absorption of the aerogels at optical frequencies enables de-frosting by solar-induced heating. These low-cost, aqueous solution-processable, sustainable, and bio-friendly aerogels may find use in next-generation intelligent THz devices.
Collapse
Affiliation(s)
- Chaoyang Kuang
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
| | - Shangzhi Chen
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
| | - Min Luo
- School of Electronic Science and Engineering, State Key Laboratory of Electronic Thin Film and Integrated DevicesUniversity of Electronic Science and Technology of ChinaChengduSichuan610 054P. R. China
| | - Qilun Zhang
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
- Wallenberg Wood Science CenterLinköping UniversityNorrköpingSE‐601 74Sweden
| | - Xiao Sun
- School of Electronic Science and Engineering, State Key Laboratory of Electronic Thin Film and Integrated DevicesUniversity of Electronic Science and Technology of ChinaChengduSichuan610 054P. R. China
| | - Shaobo Han
- School of Textile Material and EngineeringWuyi University22 DongchengcunJiangmenGuangdong529 020P. R. China
| | - Qingqing Wang
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
| | - Vallery Stanishev
- Terahertz Materials Analysis Center (THeMAC) and Center for III‐N Technology, C3NiT‐Janzèn, Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköpingSE‐581 83Sweden
- Solid State Physics and NanoLundLund UniversityLundSE‐221 00Sweden
| | - Vanya Darakchieva
- Terahertz Materials Analysis Center (THeMAC) and Center for III‐N Technology, C3NiT‐Janzèn, Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköpingSE‐581 83Sweden
- Solid State Physics and NanoLundLund UniversityLundSE‐221 00Sweden
| | - Reverant Crispin
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
- Wallenberg Wood Science CenterLinköping UniversityNorrköpingSE‐601 74Sweden
| | - Mats Fahlman
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
- Wallenberg Wood Science CenterLinköping UniversityNorrköpingSE‐601 74Sweden
| | - Dan Zhao
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
| | - Qiye Wen
- School of Electronic Science and Engineering, State Key Laboratory of Electronic Thin Film and Integrated DevicesUniversity of Electronic Science and Technology of ChinaChengduSichuan610 054P. R. China
- Yangtze Delta Region Institute (Huzhou)University of Electronic Science and Technology of ChinaHuzhouZhejiang313 001P. R. China
| | - Magnus P. Jonsson
- Laboratory of Organic Electronics, Department of Science and Technology (ITN)Linköping UniversityNorrköpingSE‐601 74Sweden
- Wallenberg Wood Science CenterLinköping UniversityNorrköpingSE‐601 74Sweden
- Stellenbosch Institute for Advanced Study (STIAS)Wallenberg Research Center at Stellenbosch UniversityStellenbosch7600South Africa
| |
Collapse
|
2
|
Chen J, Song G, Cong S, Zhao Z. Resonant-Cavity-Enhanced Electrochromic Materials and Devices. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2300179. [PMID: 36929668 DOI: 10.1002/adma.202300179] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/06/2023] [Revised: 02/26/2023] [Indexed: 06/18/2023]
Abstract
With rapid advances in optoelectronics, electrochromic materials and devices have received tremendous attentions from both industry and academia for their strong potentials in wearable and portable electronics, displays/billboards, adaptive camouflage, tunable optics, and intelligent devices, etc. However, conventional electrochromic materials and devices typically present some serious limitations such as undesirable dull colors, and long switching time, hindering their deeper development. Optical resonators have been proven to be the most powerful platform for providing strong optical confinement and controllable lightmatter interactions. They generate locally enhanced electromagnetic near-fields that can convert small refractive index changes in electrochromic materials into high-contrast color variations, enabling multicolor or even panchromatic tuning of electrochromic materials. Here, resonant-cavity-enhanced electrochromic materials and devices, an advanced and emerging trend in electrochromics, are reviewed. In this review, w e will focus on the progress in multicolor electrochromic materials and devices based on different types of optical resonators and their advanced and emerging applications, including multichromatic displays, adaptive visible camouflage, visualized energy storage, and applications of multispectral tunability. Among these topics, principles of optical resonators, related materials/devices and multicolor electrochromic properties are comprehensively discussed and summarized. Finally, the challenges and prospects for resonant-cavity-enhanced electrochromic materials and devices are presented.
Collapse
Affiliation(s)
- Jian Chen
- School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, 230026, China
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Ge Song
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Shan Cong
- School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, 230026, China
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Zhigang Zhao
- School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, 230026, China
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| |
Collapse
|
3
|
Jiang C, Ge R, Bian C, Chen L, Wang X, Zheng Y, Xu G, Cai G, Xiao X. Multicolored inorganic electrochromic materials: status, challenge, and prospects. NANOSCALE 2023; 15:15450-15471. [PMID: 37721398 DOI: 10.1039/d3nr03192f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/19/2023]
Abstract
Against the backdrop of advocacy for green and low-carbon development, electrochromism has attracted academic and industrial attention as an intelligent and energy-saving applied technology due to its optical switching behavior and its special principles of operation. Inorganic electrochromic materials, represented by transition metal oxides, are considered candidates for the next generation of large-scale electrochromic applied technologies due to their excellent stability. However, the limited color diversity and low color purity of these materials greatly restrict their development. Starting from the multicolor properties of inorganic electrochromic materials, this review systematically elaborates on recent progress in the aspects of the intrinsic multicolor of electrochromic materials, and structural multicolor based on the interaction between light and microstructure. Finally, the challenges and opportunities of inorganic electrochromic technology in the field of multicolor are discussed.
Collapse
Affiliation(s)
- Chengyu Jiang
- School of Energy Science and Engineering, University of Science and Technology of China, Hefei 230026, China
- Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Rui Ge
- School of Energy Science and Engineering, University of Science and Technology of China, Hefei 230026, China
- Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Chenchen Bian
- Key Laboratory for Special Functional Materials of Ministry of Education, National & Local Joint Engineering Research Center for High-efficiency Display and Lighting Technology, School of Materials and Engineering, and Collaborative Innovation Center of Nano Functional Materials and Applications, Henan University, Kaifeng 475004, China.
| | - Lirong Chen
- School of Energy Science and Engineering, University of Science and Technology of China, Hefei 230026, China
- Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Xingru Wang
- School of Energy Science and Engineering, University of Science and Technology of China, Hefei 230026, China
- Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Yang Zheng
- School of Energy Science and Engineering, University of Science and Technology of China, Hefei 230026, China
- Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Gang Xu
- Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Guofa Cai
- Key Laboratory for Special Functional Materials of Ministry of Education, National & Local Joint Engineering Research Center for High-efficiency Display and Lighting Technology, School of Materials and Engineering, and Collaborative Innovation Center of Nano Functional Materials and Applications, Henan University, Kaifeng 475004, China.
| | - Xiudi Xiao
- School of Physics and Optoelectronics, South China University of Technology, Guangzhou 510640, China
- State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China.
| |
Collapse
|
4
|
Bernacka-Wojcik I, Talide L, Abdel Aziz I, Simura J, Oikonomou VK, Rossi S, Mohammadi M, Dar AM, Seitanidou M, Berggren M, Simon DT, Tybrandt K, Jonsson MP, Ljung K, Niittylä T, Stavrinidou E. Flexible Organic Electronic Ion Pump for Flow-Free Phytohormone Delivery into Vasculature of Intact Plants. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2206409. [PMID: 36935365 DOI: 10.1002/advs.202206409] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/02/2022] [Revised: 02/03/2023] [Indexed: 05/18/2023]
Abstract
Plant vasculature transports molecules that play a crucial role in plant signaling including systemic responses and acclimation to diverse environmental conditions. Targeted controlled delivery of molecules to the vascular tissue can be a biomimetic way to induce long distance responses, providing a new tool for the fundamental studies and engineering of stress-tolerant plants. Here, a flexible organic electronic ion pump, an electrophoretic delivery device, for controlled delivery of phytohormones directly in plant vascular tissue is developed. The c-OEIP is based on polyimide-coated glass capillaries that significantly enhance the mechanical robustness of these microscale devices while being minimally disruptive for the plant. The polyelectrolyte channel is based on low-cost and commercially available precursors that can be photocured with blue light, establishing much cheaper and safer system than the state-of-the-art. To trigger OEIP-induced plant response, the phytohormone abscisic acid (ABA) in the petiole of intact Arabidopsis plants is delivered. ABA is one of the main phytohormones involved in plant stress responses and induces stomata closure under drought conditions to reduce water loss and prevent wilting. The OEIP-mediated ABA delivery triggered fast and long-lasting stomata closure far away from the delivery point demonstrating systemic vascular transport of the delivered ABA, verified delivering deuterium-labeled ABA.
Collapse
Affiliation(s)
- Iwona Bernacka-Wojcik
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
| | - Loïc Talide
- Umeå Plant Science Centre, Department of Forest Genetics and Plant Physiology, Swedish University of Agricultural Sciences, Umeå, 90183, Sweden
| | - Ilaria Abdel Aziz
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
| | - Jan Simura
- Umeå Plant Science Centre, Department of Forest Genetics and Plant Physiology, Swedish University of Agricultural Sciences, Umeå, 90183, Sweden
| | - Vasileios K Oikonomou
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
- Wallenberg Wood Science Center, Department of Science and Technology, Linköping University, Norrköping, SE-60174, Sweden
| | - Stefano Rossi
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
| | - Mohsen Mohammadi
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
- Wallenberg Wood Science Center, Department of Science and Technology, Linköping University, Norrköping, SE-60174, Sweden
| | - Abdul Manan Dar
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
| | - Maria Seitanidou
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
| | - Magnus Berggren
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
- Wallenberg Wood Science Center, Department of Science and Technology, Linköping University, Norrköping, SE-60174, Sweden
| | - Daniel T Simon
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
| | - Klas Tybrandt
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
- Wallenberg Wood Science Center, Department of Science and Technology, Linköping University, Norrköping, SE-60174, Sweden
| | - Magnus P Jonsson
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
- Wallenberg Wood Science Center, Department of Science and Technology, Linköping University, Norrköping, SE-60174, Sweden
| | - Karin Ljung
- Umeå Plant Science Centre, Department of Forest Genetics and Plant Physiology, Swedish University of Agricultural Sciences, Umeå, 90183, Sweden
| | - Totte Niittylä
- Umeå Plant Science Centre, Department of Forest Genetics and Plant Physiology, Swedish University of Agricultural Sciences, Umeå, 90183, Sweden
| | - Eleni Stavrinidou
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, SE-601 74, Sweden
- Umeå Plant Science Centre, Department of Forest Genetics and Plant Physiology, Swedish University of Agricultural Sciences, Umeå, 90183, Sweden
- Wallenberg Wood Science Center, Department of Science and Technology, Linköping University, Norrköping, SE-60174, Sweden
| |
Collapse
|
5
|
Zubritskaya I, Cichelero R, Faniayeu I, Martella D, Nocentini S, Rudquist P, Wiersma DS, Brongersma ML. Dynamically Tunable Optical Cavities with Embedded Nematic Liquid Crystalline Networks. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2209152. [PMID: 36683324 DOI: 10.1002/adma.202209152] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 11/21/2022] [Indexed: 06/17/2023]
Abstract
Tunable metal-insulator-metal (MIM) Fabry-Pérot (FP) cavities that can dynamically control light enable novel sensing, imaging and display applications. However, the realization of dynamic cavities incorporating stimuli-responsive materials poses a significant engineering challenge. Current approaches rely on refractive index modulation and suffer from low dynamic tunability, high losses, and limited spectral ranges, and require liquid and hazardous materials for operation. To overcome these challenges, a new tuning mechanism employing reversible mechanical adaptations of a polymer network is proposed, and dynamic tuning of optical resonances is demonstrated. Solid-state temperature-responsive optical coatings are developed by preparing a monodomain nematic liquid crystalline network (LCN) and are incorporated between metallic mirrors to form active optical microcavities. LCN microcavities offer large, reversible and highly linear spectral tuning of FP resonances reaching wavelength-shifts up to 40 nm via thermomechanical actuation while featuring outstanding repeatability and precision over more than 100 heating-cooling cycles. This degree of tunability allows for reversible switching between the reflective and the absorbing states of the device over the entire visible and near-infrared spectral regions, reaching large changes in reflectance with modulation efficiency ΔR = 79%.
Collapse
Affiliation(s)
- Irina Zubritskaya
- Geballe Laboratory for Advanced Materials, Stanford University, 476 Lomita Mall, Stanford, CA, 94305, USA
- Department of Physics, University of Gothenburg, Origovägen 6B, Gothenburg, 41296, Sweden
| | - Rafael Cichelero
- Department of Physics, University of Gothenburg, Origovägen 6B, Gothenburg, 41296, Sweden
| | - Ihar Faniayeu
- Department of Physics, University of Gothenburg, Origovägen 6B, Gothenburg, 41296, Sweden
| | - Daniele Martella
- European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, via Nello Carrara 1, Sesto Fiorentino, 50019, Italy
- Istituto Nazionale di Ricerca Metrologica (INRiM), Strada delle Cacce 91, Torino, 10135, Italy
| | - Sara Nocentini
- European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, via Nello Carrara 1, Sesto Fiorentino, 50019, Italy
- Istituto Nazionale di Ricerca Metrologica (INRiM), Strada delle Cacce 91, Torino, 10135, Italy
| | - Per Rudquist
- Department of Microtechnology and Nanoscience - MC2, Chalmers University of Technology, Kemivägen 9, Gothenburg, 41296, Sweden
| | - Diederik Sybolt Wiersma
- European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, via Nello Carrara 1, Sesto Fiorentino, 50019, Italy
- Istituto Nazionale di Ricerca Metrologica (INRiM), Strada delle Cacce 91, Torino, 10135, Italy
- Physics and Astronomy Department, University of Florence, via G. Sansone 1, Sesto Fiorentino, 50019, Italy
| | - Mark L Brongersma
- Geballe Laboratory for Advanced Materials, Stanford University, 476 Lomita Mall, Stanford, CA, 94305, USA
| |
Collapse
|
6
|
Hopmann E, Zhang W, Li H, Elezzabi AY. Advances in electrochromic device technology through the exploitation of nanophotonic and nanoplasmonic effects. NANOPHOTONICS 2023; 12:637-657. [PMID: 36844468 PMCID: PMC9945060 DOI: 10.1515/nanoph-2022-0670] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/28/2022] [Revised: 01/15/2023] [Accepted: 01/17/2023] [Indexed: 06/18/2023]
Abstract
Research regarding electrochromic (EC) materials, such materials that change their color upon application of an electrochemical stimulus, has been conducted for centuries. However, most recently, increasing efforts have been put into developing novel solutions to utilize these on-off switching materials in advanced nanoplasmonic and nanophotonic devices. Due to the significant change in dielectric properties of oxides such as WO3, NiO, Mn2O3 and conducting polymers like PEDOT:PSS and PANI, EC materials have transcended beyond simple smart window applications and are now found in plasmonic devices for full-color displays and enhanced modulation transmission and photonic devices with ultra-high on-off ratios and sensing abilities. Advancements in nanophotonic ECDs have further decreased EC switching speed by several orders of magnitude, allowing integration in real-time measurement and lab-on-chip applications. The EC nature of such nanoscale devices promises low energy consumption with low operating voltages paired with bistability and long lifetimes. We summarize these novel approaches to EC device design, lay out the current short comings and draw a path forward for future utilization.
Collapse
Affiliation(s)
- Eric Hopmann
- Ultrafast Optics and Nanophotonics Laboratory, Department of Electrical and Computer Engineering, University of Alberta, Edmonton, ABT6G 2V4, Canada
| | - Wu Zhang
- Ultrafast Optics and Nanophotonics Laboratory, Department of Electrical and Computer Engineering, University of Alberta, Edmonton, ABT6G 2V4, Canada
| | - Haizeng Li
- Optics & Thermal Radiation Research Center, Institute of Frontier and Interdisciplinary Science, Shandong University, Qingdao, Shandong266273, China
| | - Abdulhakem Y. Elezzabi
- Ultrafast Optics and Nanophotonics Laboratory, Department of Electrical and Computer Engineering, University of Alberta, Edmonton, ABT6G 2V4, Canada
| |
Collapse
|
7
|
Moriwaki H, Kamine T. "Plasma-Structural Coloring" of Penciling on a Paper. ACS APPLIED MATERIALS & INTERFACES 2023; 15:4781-4788. [PMID: 36631746 DOI: 10.1021/acsami.2c19642] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
The penciling part on a paper is colored by the formation of structural color, and the coloring of a paper without ink has been achieved. In a previous study, our group reported that structural color is formed by plasma irradiation (40-120 s) of the surface of a pencil lead or paper painted with a pencil. The formation of structural color due to the thin-layer interference of components of the pencil lead was observed. The clay exposed by removal of the surface graphite through plasma etching plays the role of a "thin layer". The pencil lead can be colored blue, red, and green by the method. In the case of the paper painted with a pencil (6B), the paper turned blue but could not form the other colors by the method. The reason is that the graphite layer on the paper is not thick enough to form thin-layer interference to show colors other than blue. We now present the method that forms structural colors by plasma irradiation of the paper painted by a graphite-rich pencil lead (9B and 12B). The formation of various structural colors, such as blue, yellow, red-purple, and green, on the paper was achieved. The colored site can be effaced by an eraser. This method is a novel coloring method without using colored inks. This environmentallly friendly coloring method can be applied to various activities, such as studies and art, and can contribute to the achievement of a sustainable society.
Collapse
Affiliation(s)
- Hiroshi Moriwaki
- Department of Applied Biology, Faculty of Textile Science and Technology, Shinshu University, 3-15-1, Tokida, Ueda 386-8567, Japan
- Research Initiative for Supra-Materials, Interdisciplinary Cluster for Cutting Edge Research, Shinshu University, 3-15-1, Tokida, Ueda 386-8567, Japan
| | - Tomoya Kamine
- Department of Applied Biology, Faculty of Textile Science and Technology, Shinshu University, 3-15-1, Tokida, Ueda 386-8567, Japan
| |
Collapse
|
8
|
Wang P, Krasavin AV, Liu L, Jiang Y, Li Z, Guo X, Tong L, Zayats AV. Molecular Plasmonics with Metamaterials. Chem Rev 2022; 122:15031-15081. [PMID: 36194441 PMCID: PMC9562285 DOI: 10.1021/acs.chemrev.2c00333] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Molecular plasmonics, the area which deals with the interactions between surface plasmons and molecules, has received enormous interest in fundamental research and found numerous technological applications. Plasmonic metamaterials, which offer rich opportunities to control the light intensity, field polarization, and local density of electromagnetic states on subwavelength scales, provide a versatile platform to enhance and tune light-molecule interactions. A variety of applications, including spontaneous emission enhancement, optical modulation, optical sensing, and photoactuated nanochemistry, have been reported by exploiting molecular interactions with plasmonic metamaterials. In this paper, we provide a comprehensive overview of the developments of molecular plasmonics with metamaterials. After a brief introduction to the optical properties of plasmonic metamaterials and relevant fabrication approaches, we discuss light-molecule interactions in plasmonic metamaterials in both weak and strong coupling regimes. We then highlight the exploitation of molecules in metamaterials for applications ranging from emission control and optical modulation to optical sensing. The role of hot carriers generated in metamaterials for nanochemistry is also discussed. Perspectives on the future development of molecular plasmonics with metamaterials conclude the review. The use of molecules in combination with designer metamaterials provides a rich playground both to actively control metamaterials using molecular interactions and, in turn, to use metamaterials to control molecular processes.
Collapse
Affiliation(s)
- Pan Wang
- State Key Laboratory of Modern Optical Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou310027, China.,Department of Physics and London Centre for Nanotechnology, King's College London, Strand, LondonWC2R 2LS, U.K.,Jiaxing Key Laboratory of Photonic Sensing & Intelligent Imaging, Jiaxing314000, China.,Intelligent Optics & Photonics Research Center, Jiaxing Research Institute, Zhejiang University, Jiaxing314000, China
| | - Alexey V Krasavin
- Department of Physics and London Centre for Nanotechnology, King's College London, Strand, LondonWC2R 2LS, U.K
| | - Lufang Liu
- State Key Laboratory of Modern Optical Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou310027, China
| | - Yunlu Jiang
- Department of Physics and London Centre for Nanotechnology, King's College London, Strand, LondonWC2R 2LS, U.K
| | - Zhiyong Li
- Jiaxing Key Laboratory of Photonic Sensing & Intelligent Imaging, Jiaxing314000, China.,Intelligent Optics & Photonics Research Center, Jiaxing Research Institute, Zhejiang University, Jiaxing314000, China
| | - Xin Guo
- State Key Laboratory of Modern Optical Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou310027, China.,Jiaxing Key Laboratory of Photonic Sensing & Intelligent Imaging, Jiaxing314000, China.,Intelligent Optics & Photonics Research Center, Jiaxing Research Institute, Zhejiang University, Jiaxing314000, China
| | - Limin Tong
- State Key Laboratory of Modern Optical Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou310027, China
| | - Anatoly V Zayats
- Department of Physics and London Centre for Nanotechnology, King's College London, Strand, LondonWC2R 2LS, U.K
| |
Collapse
|
9
|
Ko JH, Yoo YJ, Lee Y, Jeong HH, Song YM. A review of tunable photonics: Optically active materials and applications from visible to terahertz. iScience 2022; 25:104727. [PMID: 35865136 PMCID: PMC9294196 DOI: 10.1016/j.isci.2022.104727] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/26/2022] Open
Abstract
The next frontier of photonics is evolving into reconfigurable platforms with tunable functions to realize the ubiquitous application. The dynamic control of optical properties of photonics is highly desirable for a plethora of applications, including optical communication, dynamic display, self-adaptive photonics, and multi-spectral camouflage. Recently, to meet the dynamic response over broad optical bands, optically active materials have been integrated with the diverse photonic platforms, typically in the dimension of micro/nanometer scales. Here, we review recent advances in tunable photonics with controlling optical properties from visible to terahertz (THz) spectral range. We propose guidelines for designing tunable photonics in conjunction with optically active materials, inherent in wavelength characteristics. In particular, we devote our review to their potential uses for five different applications: structural coloration, metasurface for flat optics, photonic memory, thermal radiation, and terahertz plasmonics. Finally, we conclude with an outlook on the challenges and prospects of tunable photonics.
Collapse
Affiliation(s)
- Joo Hwan Ko
- School of Electrical Engineering and Computer Science, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
| | - Young Jin Yoo
- School of Electrical Engineering and Computer Science, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
| | - Yubin Lee
- School of Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
| | - Hyeon-Ho Jeong
- School of Electrical Engineering and Computer Science, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
| | - Young Min Song
- School of Electrical Engineering and Computer Science, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
- Anti-Viral Research Center, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
- AI Graduate School, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
| |
Collapse
|