Direct Synthesis of Photosensitizable Bacterial Cellulose as Engineered Living Material for Skin Wound Repair

Multifunctional bacterial cellulose-bentonite@polyethylenimine composite membranes for enhanced water treatment: Sustainable dyes and metal ions adsorption and antibacterial properties

Developing multifunctional materials for water treatment remains a significant challenge. Bacterial cellulose (BC) holds immense potential as an adsorbent with high pollutant-binding capacity, hydrophilicity, and biosafety. In this study, N-acetylglucosamine was used as a carbon source to ferment BC, incorporating amide bonds in situ. Bentonite, renowned for its adsorption properties, was added to the culture medium, resulting in BC-bentonite composite membranes via a one-step fermentation process. Polyethyleneimine (PEI) was crosslinked with amide bonds on the membrane via glutaraldehyde through Schiff base reactions to enhance the performance of the composite membrane. The obtained membrane exhibited increased hydrophilicity, enhanced active adsorption sites, and enlarged specific surface area. It not only physically adsorbed contaminants through its unique structure but also effectively captured dye molecules (Congo red, Methylene blue, Malachite green) via electrostatic interactions. Additionally, it formed stable complexes with metal ions (Cd²⁺, Pb²⁺, Cu²⁺) through coordination and effectively adsorbed their mixtures. Moreover, the composite membrane demonstrated the broad-spectrum antibacterial activity, effectively inhibiting the growth of tested bacteria. This study introduces an innovative method for fabricating composite membranes as adsorbents for complex water pollutants, showing significant potential for long-term wastewater treatment of organic dyes, heavy metal ions, and pathogens.

Multifunctional Porous Bilayer Artificial Skin for Enhanced Wound Healing

Meeting the exacting demands of wound healing encompasses rapid coagulation, superior exudate absorption, high antibacterial efficacy, and imperative support for cell growth. In this study, by emulating the intricate structure of natural skin, we prepare a multifunctional porous bilayer artificial skin to address these critical requirements. The bottom layer, mimicking the dermis, is crafted through freeze-drying a gel network comprising carboxymethyl chitosan (CMCs) and gelatin (GL), while the top layer, emulating the epidermis, is prepared via electrospinning poly(l-lactic acid) (PLLA) nanofibers. With protocatechuic aldehyde and gallium ion complexation (PA@Ga) as cross-linking agents, the bottom PA@Ga-CMCs/GL layer featured an adjustable pore size (78-138 μm), high hemostatic performance (67s), and excellent bacterial inhibition rate (99.9%), complemented by an impressive liquid-absorbing capacity (2000% swelling rate). The top PLLA layer, with dense micronanostructure and hydrophobic properties, worked as a shield to effectively thwarted liquid or bacterial penetration. Furthermore, accelerated wound closure, reduced inflammatory responses, and enhanced formation of hair follicles and blood vessels are achieved by the porous artificial skin covered on the surface of wound. Bilayer artificial skin integrates the advantages of nanofibers and freeze-drying porous materials to effectively replicate the protective properties of the epidermal layer of the skin, as well as the cell migration and tissue regeneration of the dermis. This bioabsorbable artificial skin demonstrates structural and functional comparability to real skin, which would advance the field of wound care through its multifaceted capabilities.

High-Performance Engineered Composites Biofabrication Using Fungi

Various natural polymers offer sustainable alternatives to petroleum-based adhesives, enabling the creation of high-performance engineered materials. However, additional chemical modifications and complicated manufacturing procedures remain unavoidable. Here, a sustainable high-performance engineered composite that benefits from bonding strategies with multiple energy dissipation mechanisms dominated by chemical adhesion and mechanical interlocking is demonstrated via the fungal smart creative platform. Chemical adhesion is predominantly facilitated by the extracellular polymeric substrates and glycosylated proteins present in the fungal outer cell walls. The dynamic feature of non-covalent interactions represented by hydrogen bonding endows the composite with extensive unique properties including healing, recyclability, and scalable manufacturing. Mechanical interlocking involves multiple mycelial networks (elastic modulus of 2.8 GPa) binding substrates, and the fungal inner wall skeleton composed of chitin and β-glucan imparts product stability. The physicochemical properties of composite (modulus of elasticity of 1455.3 MPa, internal bond strength of 0.55 MPa, hardness of 82.8, and contact angle of 110.2°) are comparable or even superior to those of engineered lignocellulosic materials created using petroleum-based polymers or bioadhesives. High-performance composite biofabrication using fungi may inspire the creation of other sustainable engineered materials with the assistance of the extraordinary capabilities of living organisms.

Biomimetic design of platelet-rich plasma controlled release bacterial cellulose/hydroxyapatite composite hydrogel for bone tissue engineering

Bacterial cellulose (BC) hydrogel is renowned in the field of tissue engineering for its high biocompatibility, excellent mechanical strength, and eco-friendliness. Herein, we present a biomimetic mineralization method for preparing BC/hydroxyapatite (HAP) composite hydrogel scaffolds with different mineralization time and ion concentration of the mineralized solution. Spherical HAP reinforcement enhanced bone mineralization, thereby imparting increased bioactivity to BC matrix materials. Subsequently, platelet-rich plasma (PRP) was introduced into the scaffold. The PRP-loaded hydrogel enhanced the release of growth factors, which promoted cell adhesion, growth, and bone healing. After 3 weeks of MC3T3-E1 cell-induced osteogenesis, PRP positively affected cell differentiation in BC/HAP@PRP scaffolds. Overall, these scaffolds exhibited excellent biocompatibility, mineralized nodule formation, and controlled release in vitro, demonstrating great potential for application in bone tissue repair.

Living Artificial Skin: Photosensitizer and Cell Sandwiched Bacterial Cellulose for Chronic Wound Healing

Chronic wounds pose a significant global public health challenge due to their suboptimal treatment efficacy caused by bacterial infections and microcirculatory disturbances. Inspired by the biofunctionality of natural skin, an artificial skin (HV@BC@TBG) is bioengineered with bacterial cellulose (BC) sandwiched between photosensitizers (PS) and functionalized living cells. Glucose-modified PS (TBG) and vascular endothelial growth factor (VEGF)-functionalized living cells (HV) are successively modified on each side of BC through biological metabolism and bio-orthogonal reaction. As the outermost layer, the TBG layer can generate reactive oxygen species (ROS) upon light illumination to efficiently combat bacterial infections. The HV layer is the inner layer near the diabetic wound, which servs as a living factory to continuously secrete VEGF to accelerate wound repair by promoting fibroblast proliferation and angiogenesis. The sandwiched structural artificial skin HV@BC@TBG is nontoxic, biocompatible, and demonstrated its ability to significantly accelerate the healing process of infected diabetic wounds, rendering it a promising next-generation medical therapy for chronic wound management.

Engineered Living Structures with Shape-Morphing Capability Enabled by 4D Printing with Functional Bacteria

Engineered living structures with the incorporation of functional bacteria have been explored extensively in recent years and have shown promising potential applications in biosensing, environmental remediation, and biomedicine. However, it is still rare and challenging to achieve multifunctional capabilities such as material production, shape transformation, and sensing in a single-engineered living structure. In this study, we demonstrate bifunctional living structures by synergistically integrating cellulose-generating bacteria with pH-responsive hydrogels, and the entire structures can be precisely fabricated by three-dimensional (3D) printing. Such 3D-printed bifunctional living structures produce cellulose nanofibers in ambient conditions and have reversible and controlled shape-morphing properties (usually referred to as four-dimensional printing). Those functionalities make them biomimetic versions of silkworms in the sense that both can generate nanofibers and have body motion. We systematically investigate the processing-structure-property relationship of the bifunctional living structures. The on-demand separation of 3D cellulose structures from the hydrogel template and the living nature of the bacteria after processing and shape transformation are also demonstrated.

Citrate-buffered Yamanaka medium allows to produce high-yield bacterial nanocellulose in static culture using Komagataeibacter strains isolated from apple cider vinegar

Bacterial nanocellulose (BNC) is a sustainable, renewable, and eco-friendly nanomaterial, which has gained great attentions in both academic and industrial fields. Two bacterial nanocellulose-producing strains (CVV and CVN) were isolated from apple vinegar sources, presenting high 16S rRNA gene sequence similarities (96%-98%) with Komagataeibacter species. The biofilm was characterized by scanning electron microscopy (SEM), revealing the presence of rod-shaped bacteria intricately embedded in the polymeric matrix composed of nanofibers of bacterial nanocellulose. FTIR spectrum and XRD pattern additionally confirmed the characteristic chemical structure associated with this material. The yields and productivities achieved during 10 days of fermentation were compared with Komagataeibacter xylinus ATCC 53524, resulting in low levels of BNC production. However, a remarkable increase in the BNC yield was achieved for CVV (690% increase) and CVN (750% increase) strains at day 6 of the fermentation upon adding 22 mM citrate buffer into the medium. This effect is mainly attributed to the buffering capacity of the modified Yakamana medium, which allowed to maintain pH close to 4.0 until day 6, though in combination with additional factors including stimulation of the gluconeogenesis pathway and citrate assimilation as a carbon source. In addition, the productivities determined for both isolated strains (0.850 and 0.917 g L-1 d-1) compare favorably to previous works, supporting current efforts to improve fermentation performance in static cultures and the feasibility of scaling-up BNC production in these systems.

Hyaluronic acid hydrogels with excellent self-healing capacity and photo-enhanced mechanical properties for wound healing

A continuously stable moist healing environment is immensely beneficial for wound healing, which can be availably achieved by providing an in situ hydrogel with enough strength resembling skin tissue and self-healing ability. Herein, through a dual-crosslinking strategy, hyaluronic acid-based hydrogels with excellent self-healing capacity and enhanced mechanical properties are fabricated via the acylhydrazone linkages and subsequent photocrosslinking based on hydrazide-modified sodium hyaluronate and aldehyde-modified maleic sodium hyaluronate. The hydrogels demonstrate the fast gelation process (< 1 min), the controlled swelling behaviors, and the good biocompatibility. Notably, they possess enhanced mechanical strength similar to the human dermis (∼ 2.2 kPa). Also, they can self-heal rapidly with a self-healing efficiency of ∼90 % at 6 h. Based on this, the hyaluronic acid-based hydrogels, without any biological factors involved, can facilitate the full-thickness skin wound reconstruction process by accelerating the three phases of the wound repair, including reducing wound inflammation in the inflammatory phase, promoting angiogenesis in the proliferative phase, and promoting the deposition and reconstruction of collagen in the remodeling phase. The produced hyaluronic acid hydrogel can serve as an ideal candidate for wound healing.

Injectable-Hydrogel-Based Tissue Sealant for Hemostasis, Bacteria Inhibition, and Pro-Angiogenesis in Organ Bleeding Wounds and Therapeutic Outcome Monitoring Via NIR-II Optical Imaging

Sudden hemorrhage stemming from internal organ wounds poses a grave and potentially fatal risk if left untreated. Injectable-hydrogel-based tissue sealants featuring multiple actions, including fit-to-shape in situ gelation, rapid hemostasis, pro-angiogenic, anti-bacterial and outcome tracking, are ideal for the management of organ trauma wounds. Herein, an injectable-hydrogel tissue sealant AN@CD-PEG&TQ which consists of four-arm 4-arm poly(ethylene glycol) (PEG-SC) succinimidyl carbonate), AN@CD nanoprobe, and two bioactive peptides (anti-microbial peptide Tet213 and pro-angiogenic peptide QK) is developed. Among them, AN@CD nanoparticles form through host/guest complexation of amino-group-containing β-cyclodextrin and adamantyl group, enabling in situ biomarker (NO)-activatable optoacoustic/NIR-II: Near-infrared second biological window fluorescent imaging. The ample ─NH2 groups on the surface of AN@CD readily engage in rapid cross-linking with succinimidyl ester groups located at the ends of four-arm PEG-SC. This cross-linking expedites the gelation process without necessitating additional initiators or cross-linking agents; thus, significantly enhancing both hydrogel's application convenience and biocompatibility. Bioactive peptides (Tet213 and QK) safeguard against possible bacterial infections, facilitate angiogenesis, and eventually, improve organ wounds healing. This hydrogel-based tissue sealant demonstrates superior therapeutic and bioimaging performance in various mouse models including liver hemorrhage, gastric perforation, and bacterial-infected skin wound mouse models, highlighting its potential as a high-performance wound sealant for organ bleeding wound management.

Development and Applications of D-Amino Acid Derivatives-based Metabolic Labeling of Bacterial Peptidoglycan

Peptidoglycan, an essential component within the cell walls of virtually all bacteria, is composed of glycan strands linked by stem peptides that contain D-amino acids. The peptidoglycan biosynthesis machinery exhibits high tolerance to various D-amino acid derivatives. D-amino acid derivatives with different functionalities can thus be specifically incorporated into and label the peptidoglycan of bacteria, but not the host mammalian cells. This metabolic labeling strategy is highly selective, highly biocompatible, and broadly applicable, which has been utilized in various fields. This review introduces the metabolic labeling strategies of peptidoglycan by using D-amino acid derivatives, including one-step and two-step strategies. In addition, we emphasize the various applications of D-amino acid derivative-based metabolic labeling, including bacterial peptidoglycan visualization (existence, biosynthesis, and dynamics, etc.), bacterial visualization (including bacterial imaging and visualization of growth and division, metabolic activity, antibiotic susceptibility, etc.), pathogenic bacteria-targeted diagnostics and treatment (positron emission tomography (PET) imaging, photodynamic therapy, photothermal therapy, gas therapy, immunotherapy, etc.), and live bacteria-based therapy. Finally, a summary of this metabolic labeling and an outlook is provided.

Chemically Tailored Single Atoms for Targeted and Light-Controlled Bactericidal Activity

Single-atom (SA) nanoparticles exhibit considerable potential in terms of photothermal properties for bactericidal applications. Nevertheless, the restricted efficacy of their targeted and controlled antibacterial activity has hindered their practical implementation. This study aims to overcome this obstacle by employing chemical modifications to tailor SAs, thereby achieving targeted and light-controlled antimicrobial effects. By conducting atomic-level modifications on palladium SAs using glutathione (GSH) and mercaptophenylboronic acid (MBA), their superior targeted binding capabilities toward Escherichia coli cells are demonstrated, surpassing those of SAs modified with cysteine (Cys). Moreover, these modified SAs effectively inhibit wound bacteria proliferation and promote wound healing in rats, without inducing noticeable toxicity to major organs under 808 nm laser irradiation. This study highlights the significance of chemical engineering in tailoring the antibacterial properties of SA nanoparticles, opening avenues for combating bacterial infections and advancing nanoparticle-based therapies.

Bacterial Cellulose Applied in Wound Dressing Materials: Production and Functional Modification - A Review

In recent years, the development of new type wound dressings has gradually attracted more attention. Bacterial cellulose (BC) is a natural polymer material with various unique properties, such as ultrafine 3D nanonetwork structure, high water retention capacity, and biocompatibility. These properties allow BC to be used independently or in combination with different components (such as biopolymers and nanoparticles) to achieve diverse effects. This means that BC has great potential as a wound dressing. However, systematic summaries for the production and commercial application of BC-based wound dressings are still lacking. Therefore, this review provides a detailed introduction to the production fermentation process of BC, including various production strains and their biosynthetic mechanisms. Subsequently, with regard to the functional deficiencies of bacterial cellulose as a wound dressing, recent research progress in this area is enumerated. Finally, prospects are discussed for the low-cost production and high-value-added product development of BC-based wound dressings.

Biomimetic Wearable Sensors: Emerging Combination of Intelligence and Electronics

Owing to the advancement of interdisciplinary concepts, for example, wearable electronics, bioelectronics, and intelligent sensing, during the microelectronics industrial revolution, nowadays, extensively mature wearable sensing devices have become new favorites in the noninvasive human healthcare industry. The combination of wearable sensing devices with bionics is driving frontier developments in various fields, such as personalized medical monitoring and flexible electronics, due to the superior biocompatibilities and diverse sensing mechanisms. It is noticed that the integration of desired functions into wearable device materials can be realized by grafting biomimetic intelligence. Therefore, herein, the mechanism by which biomimetic materials satisfy and further enhance system functionality is reviewed. Next, wearable artificial sensory systems that integrate biomimetic sensing into portable sensing devices are introduced, which have received significant attention from the industry owing to their novel sensing approaches and portabilities. To address the limitations encountered by important signal and data units in biomimetic wearable sensing systems, two paths forward are identified and current challenges and opportunities are presented in this field. In summary, this review provides a further comprehensive understanding of the development of biomimetic wearable sensing devices from both breadth and depth perspectives, offering valuable guidance for future research and application expansion of these devices.

Graphene-Based Engineered Living Materials

With the rise of engineered living materials (ELMs) as innovative, sustainable and smart systems for diverse engineering and biological applications, global interest in advancing ELMs is on the rise. Graphene-based nanostructures can serve as effective tools to fabricate ELMs. By using graphene-based materials as building units and microorganisms as the designers of the end materials, next-generation ELMs can be engineered with the structural properties of graphene-based materials and the inherent properties of the microorganisms. However, some challenges need to be addressed to fully take advantage of graphene-based nanostructures for the design of next-generation ELMs. This work covers the latest advances in the fabrication and application of graphene-based ELMs. Fabrication strategies of graphene-based ELMs are first categorized, followed by a systematic investigation of the advantages and disadvantages within each category. Next, the potential applications of graphene-based ELMs are covered. Moreover, the challenges associated with fabrication of next-generation graphene-based ELMs are identified and discussed. Based on a comprehensive overview of the literature, the primary challenge limiting the integration of graphene-based nanostructures in ELMs is nanotoxicity arising from synthetic and structural parameters. Finally, we present possible design principles to potentially address these challenges.

A dual pH- and temperature-responsive hydrogel produced in situ crosslinking of cyclodextrin-cellulose for wound healing

Cellulose hydrogels have gained attention in the field of wound healing due to their biodegradability, biocompatibility, and the capacity to sustain a humid environment that promotes healing. Conventional cellulose hydrogels were usually lacked responsiveness to changing wound conditions, and limited capacity for controlled release of active substances. The composite hydrogels with Berberine (BBR) loading were prepared from bamboo parenchymal cellulose and in situ crosslinking carboxylated-β-cyclodextrin (BPCH-B) via dissolution. The inclusion of BBR enhanced the antibacterial properties of cellulose hydrogel while maintaining biocompatibility and drug delivery capabilities. The dual-responsive dressing was demonstrated to modulate drug release kinetics in accordance with the pH and temperature conditions prevailing within the wound site. Specifically, study exhibited a significant increase in drug release (over 70 %) under alkaline pH (7.6) and temperature (40 °C) conditions. Full-thickness wound healing experiments indicated that BPCH-B had better healing ability, and the wound healing area of BPCH-B treated was 80 % within 12 days, while the control group was only 50 %. This strategy for generating functional wound healing can be further control release of drug compounds for treatment of wounds, enabling development of practical wound care materials.

Mycelium Composite with Hierarchical Porous Structure for Thermal Management

High-performance porous materials with a low carbon footprint provide sustainable alternatives to petroleum-based lightweight foams and can help meet carbon neutrality goals. However, these materials generally face a trade-off between thermal management capabilities and structural strength. Here, a mycelium composite with a hierarchical porous structure, including both macro- and microscale pores, produced from multiple and advanced mycelial networks (elastic modulus of 1.2 GPa) binding loosely distributed sawdust is demonstrated. The morphological, biological, and physicochemical properties of the filamentous mycelium and composites are discussed in terms of how they are influenced by the mycelial system of the fungi and the way they interact with the substrate. The composite shows a porosity of 0.94, a noise reduction coefficient of 0.55 at a frequency range of 250-3000 Hz (for a 15 mm thick sample), a thermal conductivity of 0.042 W m-1  K-1 , and an energy absorption of 18 kJ m-3 at 50% strain. It is also hydrophobic, repairable, and recyclable. It is expected that the hierarchical porous structural composite with excellent thermal and mechanical properties can make a significant impact on the future development of highly sustainable alternatives to lightweight plastic foams.

One-Pot Preparation of Skin-Inspired Multifunctional Hybrid Hydrogel with Robust Wound Healing Capacity

Bioinspired hydrogels have demonstrated multiple superiorities over traditional wound dressings for wound healing applications. However, the fabrication of bioinspired hydrogel-based wound dressings with desired functionalities always requires multiple successive steps, time-consuming processes, and/or sophisticated protocols, plaguing their clinical applications. Here, a facile one-pot strategy is developed to prepare a skin-inspired multifunctional hydrogel within 30 min by incorporating elastin (an essential functional component of the dermal extracellular matrix), tannic acid, and chitosan into the covalently cross-linked poly(acrylamide) network through noncovalent interactions. The resulting hydrogel exhibits a Young's modulus (ca. 36 kPa) comparable to that of human skin, a high elongation-at-break (ca. 1550%), a satisfactory tensile strength (ca. 61 kPa), and excellent elastic self-restorability, enabling the hydrogel to synchronously and conformally deform with human skin when used as wound dressings. Importantly, the hydrogel displays a self-adhesive property to skin tissues with an appropriate bonding strength (ca. 55 kPa measured on intact porcine skin), endowing the hydrogel with the ability to rapidly self-adhere to intact human skin, sealing the wound surface and also easily being removed without residue left or trauma caused to the skin. The hydrogel also possesses remarkable antibacterial activity, antioxidant capability, and hemocompatibility. All of these collective beneficial properties enable the hydrogel to significantly accelerate the wound healing process, outperforming the commercial wound dressings.

Organic functional substance engineered living materials for biomedical applications

Modifying living materials with organic functional substances (OFS) is a convenient and effective strategy to control and monitor the transport, engraftment, and secretion processes in living organisms. OFSs, including small organic molecules and organic polymers, own the merit of design flexibility, satisfying performance, and excellent biocompatibility, which allow for living materials functionalization to realize real-time sensing, controlled drug release, enhanced biocompatibility, accurate diagnosis, and precise treatment. In this review, we discuss the different principles of OFS modification on living materials and demonstrate the applications of engineered living materials in health monitoring, drug delivery, wound healing, and tissue regeneration.

Recent advances in bacterial cellulose-based antibacterial composites for infected wound therapy

Wound infection arising from pathogenic bacteria brought serious trouble to the patient and medical system. Among various wound dressings that are effective in killing pathogenic bacteria, antimicrobial composites based on bacterial cellulose (BC) are becoming the most popular materials due to their success in eliminating pathogenic bacteria, preventing wound infection, and promoting wound healing. However, as an extracellular natural polymer, BC is not inherently antimicrobial, which means that it must be combined with other antimicrobials to be effective against pathogens. BC has many advantages over other polymers, including nano-structure, significant moisture retention, non-adhesion to the wound surface, which has made it superior to other biopolymers. This review introduces the recent advances in BC-based composites for the treatment of wound infection, including the classification and preparation methods of composites, the mechanism of wound treatment, and commercial application. Moreover, their wound therapy applications include hydrogel dressing, surgical sutures, wound healing bandages, and patches are summarized in detail. Finally, the challenges and future prospects of BC-based antibacterial composites for the treatment of infected wounds are discussed.

NIR-responsive carrier-free nanoparticles based on berberine hydrochloride and indocyanine green for synergistic antibacterial therapy and promoting infected wound healing

Bacterial infections cause severe health conditions, resulting in a significant economic burden for the public health system. Although natural phytochemicals are considered promising anti-bacterial agents, they suffer from several limitations, such as poor water solubility and low bioavailability in vivo, severely restricting their wide application. Herein, we constructed a near-infrared (NIR)-responsive carrier-free berberine hydrochloride (BH, phytochemicals)/indocyanine green (ICG, photosensitizer) nanoparticles (BI NPs) for synergistic antibacterial of an infected wound. Through electrostatic interaction and π-π stacking, the hydrophobic BH and amphiphilic ICG are initially self-assembled to generate carrier-free nanoparticles. The obtained BI NPs demonstrated NIR-responsive drug release behavior and better photothermal conversion efficiency of up to 36%. In addition, BI NPs stimulated by NIR laser exhibited remarkable antibacterial activity, which realized the synergistic antibacterial treatment and promoted infected wound healing. In summary, the current research results provided a candidate strategy for self-assembling new BI NPs to treat bacterial infections synergistically.

Animal tissue-derived biomaterials for promoting wound healing

The skin serves as the primary barrier between the human body and external environment, and is therefore susceptible to damage from various factors. In response to this challenge, animal tissue-derived biomaterials have emerged as promising candidates for wound healing due to their abundant sources, low side-effect profiles, exceptional bioactivity, biocompatibility, and unique extracellular matrix (ECM) mimicry. The evolution of modern engineering technology and therapies has allowed these animal tissue-derived biomaterials to be transformed into various forms and modified to possess the necessary properties for wound repair. This review provides an overview of the wound healing process and the factors that influence it. We then describe the extraction methods, important properties, and recent practical applications of various animal tissue-derived biomaterials. Our focus then shifts to the critical properties of these biomaterials in skin wound healing and their latest research developments. Finally, we critically examine the limitations and future prospects of biomaterials generated from animal tissues in this field.

From Nature to Lab: Sustainable Bacterial Cellulose Production and Modification with Synthetic Biology

Bacterial cellulose (BC) is a macromolecule with versatile applications in medicine, pharmacy, biotechnology, cosmetology, food and food packaging, ecology, and electronics. Although many bacteria synthesize BC, the most efficient BC producers are certain species of the genera Komagataeibacter and Novacetimonas. These are also food-grade bacteria, simplifying their utilization at industrial facilities. The basic principles of BC synthesis are known from studies of Komagataeibacter xylinus, which became a model species for studying BC at genetic and molecular levels. Cellulose can also be of plant origin, but BC surpasses its purity. Moreover, the laboratory production of BC enables in situ modification into functionalized material with incorporated molecules during its synthesis. The possibility of growing Komagataeibacter and Novacetimonas species on various organic substrates and agricultural and food waste compounds also follows the green and sustainable economy principles. Further intervention into BC synthesis was enabled by genetic engineering tools, subsequently directing it into the field of synthetic biology. This review paper presents the development of the fascinating field of BC synthesis at the molecular level, seeking sustainable ways for its production and its applications towards genetic modifications of bacterial strains for producing novel types of living biomaterials using the flexible metabolic machinery of bacteria.

Advances in drug delivery applications of modified bacterial cellulose-based materials

Bacterial cellulose (BC) is generated by certain species of bacteria and comprises polysaccharides with unique physical, chemical, and mechanical characteristics. Due to its outstanding biocompatibility, high purity, excellent mechanical strength, high water absorption, and highly porous structure, bacterial cellulose has been recently investigated for biomedical application. However, the pure form of bacterial cellulose is hardly used as a biomedical material due to some of its inherent shortcomings. To extend its applications in drug delivery, modifications of native bacterial cellulose are widely used to improve its properties. Usually, bacterial cellulose modifications can be carried out by physical, chemical, and biological methods. In this review, a brief introduction to bacterial cellulose and its production and fabrication is first given, followed by up-to-date and in-depth discussions of modification. Finally, we focus on the potential applications of bacterial cellulose as a drug delivery system.

The Construction of a Microbial Synthesis System for Rare Earth Enrichment and Material Applications

Rare earth materials play an irreplaceable role in biomedical and high technology fields. However, typical mining and extraction approaches to rare earth elements (REEs) often lead to severe environmental problems and resource wastage due to the involvement of hazardous chemicals. Although biomining shows elegant alternatives, there are still grand challenges to sustainably isolate and recover REEs in nature because of insufficient metal-extracting microbes and RE-scavenging macromolecular tools. To obtain high-performance rare earth materials directly from rare earth ore, a new generation of biological synthesis strategies needs to be developed for the efficient preparation of REEs. The microbial synthesis system established here has achieved active biomanufacturing of high-purity rare earth products. Further, through employing robust affinity columns bioconjugated with structurally engineered proteins, outstanding separation of Eu/Lu and Dy/La is acquired with the purity of 99.9% (Eu), 97.1% (La), and 92.7% (Dy). More importantly, in situ one-pot synthesis of lanthanide-dependent methanol dehydrogenase is well harnessed and exclusively adsorbs La, Ce, Pr, and Nd in RE tailing for advanced biocatalysis, indicating high value-added application. Therefore, this novel biosynthetic platform provides an insightful roadmap to expand the scope of chassis engineering in terms of biofoundry and to manufacture valuable bioproducts related to REEs.

Engineered Living Materials for Advanced Diseases Therapy

Natural living materials serving as biotherapeutics exhibit great potential for treating various diseases owing to their immunoactivity, tissue targeting, and other biological activities. In this review, the recent developments in engineered living materials, including mammalian cells, bacteria, viruses, fungi, microalgae, plants, and their active derivatives that are used for treating various diseases are summarized. Further, the future perspectives and challenges of such engineered living material-based biotherapeutics are discussed to provide considerations for future advances in biomedical applications.

Synthetic engineered bacteria for cancer therapy

INTRODUCTION

Cancer mortality worldwide highlights the urgency for advanced therapeutic methods to fill the gaps in conventional cancer therapies. Bacteriotherapy is showing great potential in tumor regression due to the motility and colonization tendencies of bacteria. However, the complicated in vivo environment and tumor pathogenesis hamper the therapeutic outcomes. Synthetic engineering methods endow bacteria with flexible abilities both at the extracellular and intracellular levels to meet treatment requirements. In this review, we introduce synthetic engineering methods for bacterial modifications. We highlight the recent progress in engineered bacteria and explore how these synthetic methods endow bacteria with superior abilities in cancer therapy. The current clinical translations are further discussed. Overall, this review may shed light on the advancement of engineered bacteria for cancer therapy.

AREAS COVERED

Recent progress in synthetic methods for bacterial engineering and specific examples of their applications in cancer therapy are discussed in this review.

EXPERT OPINION

Bacteriotherapy bridges the gaps of conventional cancer therapies through the natural motility and colonization tendency of bacteria, as well as their synthetic engineering. Nevertheless, to fulfill the bacteriotherapy potential and move into clinical trials, more research focusing on its safety concerns should be conducted.

The biosynthesis of amidated bacterial cellulose derivatives via in-situ strategy

Bacterial cellulose, as a kind of natural biopolymer produced by bacterial fermentation, has attracted wide attention owing its unique physical and chemical properties. Nevertheless, the single functional group on the surface of BC greatly hinders its wider application. The functionalization of BC is of great significance to broaden the application of BC. In this work, N-acetylated bacterial cellulose (ABC) was successfully prepared using K. nataicola RZS01-based direct synthetic method. FT-IR, NMR and XPS confirmed the in-situ modification of BC by acetylation. The SEM and XRD results demonstrated that ABC has a lower crystallinity and higher fiber width compare with pristine 88 BCE % cell viability on NIH-3 T3 cell and near zero hemolysis ratio indicate its good biocompatibility. In addition, the as-prepared acetyl amine modified BC was further treated by nitrifying bacteria to enrich its functionalized diversity. This study provides a mild in-situ pathway to construct BC derivatives in an environmentally friendly way during its metabolism.

Fabrication of Advanced Cellulosic Triboelectric Materials via Dielectric Modulation

The rapid rise of triboelectric nanogenerators (TENGs), which are emerging energy conversion devices in advanced electronics and wearable sensing systems, has elevated the interest in high-performance and multifunctional triboelectric materials. Among them, cellulosic materials, affording high efficiency, biodegradability, and customizability, are becoming a new front-runner. The inherently low dielectric constant limits the increase in the surface charge density. However, owing to its unique structure and excellent processability, cellulose shows great potential for dielectric modulation, providing a strong impetus for its advanced applications in the era of Internet of Things and artificial intelligence. This review aims to provide comprehensive insights into the fabrication of dielectric-enhanced cellulosic triboelectric materials via dielectric modulation. The exceptional advantages and research progress in cellulosic materials are highlighted. The effects of the dielectric constant, polarization, and percolation threshold on the charge density are systematically investigated, providing a theoretical basis for cellulose dielectric modulation. Typical dielectric characterization methods are introduced, and their technical characteristics are analyzed. Furthermore, the performance enhancements of cellulosic triboelectric materials endowed by dielectric modulation, including more efficient energy harvesting, high-performance wearable electronics, and impedance matching via material strategies, are introduced. Finally, the challenges and future opportunities for cellulose dielectric modulation are summarized.

Nonreleasing AgNP Colloids Composite Hydrogel with Potent Hemostatic, Photodynamic Bactericidal and Wound Healing-Promoting Properties

Reactive oxygen species (ROS) produced by noble metallic nanoparticles under visible light is an effective way to combat drug-resistant bacteria colonized on the wound. However, the photocatalytic efficiency of noble metallic nanoparticles is limited by its self-aggregation in water media. Moreover, the fast release of noble metallic ions from nanoparticles might engender cellular toxicity and hazardous environmental issues. Herein, we chose AgNPs, the most common plasmonic noble metallic nanoparticles, as an example, modifying the surface of AgNPs with oleic acid and n-butylamine and imbedded them into calcium alginate (CA) hydrogel that holds tissue adhesion, rapid hemostatic, sunlight-sensitive antibacterial and anti-inflammatory abilities, and thus effectively promotes the healing of wounds. Unlike conventional AgNP-based materials, the constrain of colloids and hydrogel networks hinders the leach of Ag⁺. Nonetheless, the CA/Ag hydrogels exhibit on-demand photodynamic antibacterial efficacy due to the generation of ROS under visible light. In addition, the CA/Ag hydrogel can effectively stop the hemorrhage in a mouse liver bleeding model due to their skin-adaptive flexibility and tissue adhesiveness. The potent sunlight-responsive antibacterial activity of the CA/Ag hydrogel can effectively kill multidrug-resistant bacteria both in vitro (>99.999%) and in vivo (>99.9%), while the diminished Ag⁺ release guarantees its biocompatibility. The CA/Ag hydrogel significantly promotes the wound healing process by the downregulation of proinflammatory cytokines (TNF-α and IL-6) in a rodent full-thickness cutaneous wound model. Overall, the proposed multifunctional CA/Ag nanocomposite hydrogel has excellent prospects as an advanced wound dressing.

Engineered Living Materials For Sustainability

Recent advances in synthetic biology and materials science have given rise to a new form of materials, namely engineered living materials (ELMs), which are composed of living matter or cell communities embedded in self-regenerating matrices of their own or artificial scaffolds. Like natural materials such as bone, wood, and skin, ELMs, which possess the functional capabilities of living organisms, can grow, self-organize, and self-repair when needed. They also spontaneously perform programmed biological functions upon sensing external cues. Currently, ELMs show promise for green energy production, bioremediation, disease treatment, and fabricating advanced smart materials. This review first introduces the dynamic features of natural living systems and their potential for developing novel materials. We then summarize the recent research progress on living materials and emerging design strategies from both synthetic biology and materials science perspectives. Finally, we discuss the positive impacts of living materials on promoting sustainability and key future research directions.

Enzyme-regulated NO programmed to release from hydrogel-forming microneedles with endogenous/photodynamic synergistic antibacterial for diabetic wound healing

The infection-prone wound pathology microenvironment leads to ulceration and difficult healing of diabetic wounds, which seriously affects the quality of survival of patients. In this study, natural polymer materials gelatin and polylysine were used as substrates. By introducing iron/tannic acid (Fe^IIITA) composite nanoparticles with excellent photothermal properties into the system, the glutamine residues of gelatin were crosslinked with the primary ammonia of polylysine by glutamine aminotransferase. A nanocomposite hydrogel with excellent antibacterial ability and NO production was constructed it was used to improve the clinical problems of diabetes wounds that were difficult to vascularize and easy to be infected. Under the premise of maintaining its structural stability, the hydrogel can be customized to meet the needs of different mechanical strengths by adjusting the ratios to match different diabetic wounds. Meanwhile, the photothermal effect of Fe^IIITA nanoparticles can synergize with the endogenous antibacterial ability of polylysine to improve the antibacterial efficacy of hydrogels. The potential of hydrogel to promote intracellular NO production was confirmed by fluorescent staining. Microneedle patches prepared from hydrogel can be applied to diabetic wounds, which can achieve NO deep release. Its anti-inflammatory and angiogenic abilities are also useful in achieving effective healing of diabetic wounds.

Aligned electrospun fiber film loaded with multi-enzyme mimetic iridium nanozymes for wound healing

A film with elaborate microstructures that offers biomimetic properties and multi functionalities is highly desired in wound healing. Here, we develop an aligned hydrogel fiber film integrated with multi-active constituents to promote wound healing. Such fiber films are designed and constructed by photo-crosslinking the methacrylate gelatin (GelMA) doped with silver nanoparticles (Ag NPs) and iridium nanoparticles coated with polyvinylpyrrolidone (PVP-Ir NPs) in the precursor solution using electrospinning. The nature of GelMA hydrogel and the aligned arrangement of nanofibers endow the film with high-water content, self-degradability, improved bionic characteristics, oriented cell growth, and improved cell proliferation and migration. Moreover, the encapsulated nanozymes and Ag NPs offer the fiber film with superior reactive oxygen species (ROS) scavenging and antibacterial capability. The infected wound model shows that the multi-active hydrogel fiber film can reduce inflammation by killing bacteria and decomposing ROS, which accelerates the growth of new blood vessels and granulation tissue. Benefitting from these features, the versatile aligned GelMA fiber film demonstrates the clinically translational potential for wound healing.

Engineered living materials (ELMs) design: From function allocation to dynamic behavior modulation

Natural materials possess many distinctive "living" attributes, such as self-growth, self-healing, environmental responsiveness, and evolvability, that are beyond the reach of many existing synthetic materials. The emerging field of engineered living materials (ELMs) takes inspiration from nature and harnesses engineered living systems to produce dynamic and responsive materials with genetically programmable functionalities. Here, we identify and review two main directions for the rational design of ELMs: first, engineering of living materials with enhanced performances by incorporating functional material modules, including engineered biological building blocks (proteins, polysaccharides, and nucleic acids) or well-defined artificial materials; second, engineering of smart ELMs that can sense and respond to their surroundings by programming dynamic cellular behaviors regulated via cell-cell or cell-environment interactions. We next discuss the strengths and challenges of current ELMs and conclude by providing a perspective of future directions in this promising area.