Crowning Lithium Ions in Hole-Transport Layer toward Stable Perovskite Solar Cells

Tailored Supramolecular Interactions in Host-Guest Complexation for Efficient and Stable Perovskite Solar Cells and Modules

Host-guest complexation offers a promising approach for mitigating surface defects in perovskite solar cells (PSCs). Crown ethers are the most widely used macrocyclic hosts for complexing perovskite surfaces, yet their supramolecular interactions and functional implications require further understanding. Here we show that the dipole moment of crown ethers serves as an indicator of supramolecular interactions with both perovskites and precursor salts. A larger dipole moment, achieved through the substitution of heteroatoms, correlates with enhanced coordination with lead cations. Perovskite films incorporating aza-crown ethers as additives exhibited improved morphology, reduced defect densities, and better energy-level alignment compared to those using native crown ethers. We report power-conversion efficiencies (PCEs) exceeding 25 % for PSCs, which show enhanced long-term stability, and a record PCE of 21.5 % for host-guest complexation-based perovskite solar modules with an active area of 14.0 cm2.

Superoxide radical derived metal-free spiro-OMeTAD for highly stable perovskite solar cells

Lithium salt-doped spiro-OMeTAD is widely used as a hole-transport layer (HTL) for high-efficiency n-i-p perovskite solar cells (PSCs), but unfortunately facing awkward instability for commercialization arising from the intrinsic Li+ migration and hygroscopicity. We herein demonstrate a superoxide radicals (•O2-) derived HTL of metal-free spiro-OMeTAD with remarkable capability of avoiding the conventional tedious oxidation treatment in air for highly stable PSCs. Present work explores the employing of variant-valence Eu(TFSI)2 salts that could generate •O2- for facile and adequate pre-oxidation of spiro-OMeTAD, resulting in the HTL with dramatically increased conductivity and work function. Comparing to devices adopting HTL with LiTFSI doping, the •O2--derived spiro-OMeTAD increases the PSCs efficiency up to 25.45% and 20.76% for 0.05 cm2 active area and 6 × 6 cm2 module, respectively. State-of-art PSCs employing such metal-free HTLs are also demonstrated to show much-improved environmental stability even under harsh conditions, e.g., maintaining over 90% of their initial efficiency after 1000 h of operation at the maximum power point and after 80 light-thermal cycles under simulated low earth orbit conditions, respectively, indicating the potentials of developing metal-free spiro-OMeTAD for low-cost and shortened processing of perovskite photovoltaics.

Highly Efficient and Stable Perovskite Solar Modules Based on FcPF6 Engineered Spiro-OMeTAD Hole Transporting Layer

Li-TFSI doped spiro-OMeTAD is widely recognized as a beneficial hole transport layer (HTL) in perovskite solar cells (PSCs), contributing to high device efficiencies. However, the uncontrolled migration of lithium ions (Li+) during device operation has impeded its broad adoption in scalable and stable photovoltaic modules. Herein, an additive strategy is proposed by employing ferrocenium hexafluorophosphate (FcPF6) as a relay medium to enhance the hole extraction capability of the spiro-OMeTAD via the instant oxidation function. Besides, the novel Fc-Li interaction effectively restricts the movement of Li+. Simultaneously, the dissociative hexafluorophosphate group is cleverly exploited to regulate the unstable iodide species on the perovskite surface, further inhibiting the formation of migration channels and stabilizing the interfaces. This modification leads to power conversion efficiencies (PCEs) reaching 22.13% and 20.27% in 36 cm2 (active area of 18 cm2) and 100 cm2 (active area of 56 cm2) perovskite solar modules (PSMs), respectively, with exceptional operational stability obtained for over 1000 h under the ISOS-L-1 procedure. The novel FcPF6-based engineering approach is pivotal for advancing the industrialization of PSCs, particularly those relying on high-performance spiro-OMeTAD- based HTLs.

Crown Ethers with Different Cavity Diameters Inhibit Ion Migration and Passivate Defects toward Efficient and Stable Lead Halide Perovskite Solar Cells

Organic-inorganic hybrid metal halide perovskite solar cells have been considered as one of the most promising next-generation photovoltaic technologies. Nevertheless, perovskite defects and Li+ ionic migration will seriously affect the power conversion efficiency and stability of the formal device. Herein, we designed two crown ether derivatives (PC12 and PC15) with different cavity diameters, which selectively bind to different metal cations. It is found that PC15 in perovskite precursor solution can actively regulate the nucleation and crystallization processes and passivate the uncoordinated Pb2+ ions, while PC12 at the interface between the perovskite layer and hole-transporting layer can effectively inhibit the migration of Li+ ions and reduce nonradiative recombination losses. Therefore, PC12 and PC15 can act as "lubricant" and defect passivators, as well as inhibitors of ion migration, when they are synergistically applied at the surface and bulk of perovskite layer. Consequently, the optimized device achieved a champion efficiency of 24.8% with significantly improved humidity, thermal, and light stability.

Engineering the Hole Transport Layer with a Conductive Donor-Acceptor Covalent Organic Framework for Stable and Efficient Perovskite Solar Cells

Spiro-OMeTAD doped with lithium-bis(trifluoromethylsulfonyl)-imide (Li-TFSI) and tertbutyl-pyridine (t-BP) is widely used as a hole transport layer (HTL) in n-i-p perovskite solar cells (PSCs). Spiro-OMeTAD based PSCs typically show poor stability owing to the agglomeration of Li-TFSI, the migration of lithium ions (Li+), and the existence of potential mobile defects originating from the perovskite layer. Thus, it is necessary to search for a strategy that suppresses the degradation of PSCs and overcomes the Shockley Queisser efficiency limit via harvesting excess energy from hot charge carrier. Herein, two covalent organic frameworks (COFs) including BPTA-TAPD-COF and a well-defined donor-acceptor COF (BPTA-TAPD-COF@TCNQ) were developed and incorporated into Spiro-OMeTAD HTL. BPTA-TAPD-COF and BPTA-TAPD-COF@TCNQ could act as multifunctional additives of Spiro-OMeTAD HTL, which improve the photovoltaic performance and stability of the PSC device by accelerating charge-carrier extraction, suppressing the Li+ migration and Li-TFSI agglomeration, and capturing mobile defects. Benefiting from the increased conductivity, the addition of BPTA-TAPD-COF@TCNQ in the device led to the highest power conversion efficiency of 24.68% with long-term stability in harsh conditions. This work provides an example of using COFs as additives of HTL to enable improvements of both efficiency and stability for PSCs.

Organic Semiconductor Based on N, S-Containing Crown Ether Enabling Efficient and Stable Perovskite Solar Cells

The uncoordinated lead cations are ubiquitous in perovskite films and severely affect the efficiency and stability of perovskite solar cells (PSCs). In this work, 15-crown-5 with various heteroatoms are connected to the organic semiconductor carbazole diphenylamine, and two new compounds, CDT-S and CDT-N, are developed to modify the Pb2+ defects in perovskite films through the anti-solvent method. Apart from the oxygen atoms, there are also N atoms on crown ether ring in CDT-N, and both S and N heteroatoms in CDT-S. The heteroatoms enhance the interaction between the crown ether-based semiconductors and the undercoordinated Pb2+ defect in perovskite. Particularly, the stronger interaction between S atoms and Pb2+ further enhances the defect passivation effect of CDT-S than CDT-N, thereby more effectively suppressing the non-radiative recombination of charge carriers. Finally, the efficiency of the device treated with CDT-S is up to 23.05 %. Moreover, the unencapsulated device based on CDT-S maintained 90.5 % of the initial efficiency after being stored under dark conditions for 1000 hours, demonstrating good long-term stability. Our work demonstrates that crown ethers are promising in perovskite solar cells, and the crown ether containing multiple heteroatoms could effectively improve both efficiency and stability of devices.

Enhancing Stability and Efficiency of Inverted Inorganic Perovskite Solar Cells with In-Situ Interfacial Cross-Linked Modifier

Inverted inorganic perovskite solar cells (PSCs) is potential as the top cells in tandem configurations, owing to the ideal bandgap, good thermal and light stability of inorganic perovskites. However, challenges such as mismatch of energy levels between charge transport layer and perovskite, significant non-radiative recombination caused by surface defects, and poor water stability have led to the urgent need for further improvement in the performance of inverted inorganic PSCs. Herein, the fabrication of efficient and stable CsPbI3-x Brx PSCs through surface treatment of (3-mercaptopropyl) trimethoxysilane (MPTS), is reported. The silane groups in MPTS can in situ crosslink in the presence of moisture to build a 3-dimensional (3D) network by Si-O-Si bonds, which forms a hydrophobic layer on perovskite surface to inhibit water invasion. Additionally, -SH can strongly interact with the undercoordinated Pb2+ at the perovskite surface, effectively minimizing interfacial charge recombination. Consequently, the efficiency of the inverted inorganic PSCs improves dramatically from 19.0% to 21.0% under 100 mW cm-2 illumination with MPTS treatment. Remarkably, perovskite films with crosslinked MPTS exhibit superior stability when soaking in water. The optimized PSC maintains 91% of its initial efficiency after aging 1000 h in ambient atmosphere, and 86% in 800 h of operational stability testing.

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

Metal halide inorganic perovskite solar cells (PSCs) have great potential to achieve high efficiency with excellent thermal stability. However, the surface defect traps restrain the achievement of high open circuit voltage (VOC ) and power conversion efficiency (PCE) of the devices due to the severe nonradiative charge recombination. Moreover, the state-of-the-art hole transporting layer (HTL) significantly hampers device moisture stability, even though it renders the highest solar cell efficiency. Herein, a one-stone-two-birds strategy is proposed using a biocompatible material tryptamine (TA) as an additive in HTL. First, TA bearing electron rich moieties can favorably passivate the surface defects of inorganic perovskite films, significantly reducing trap density and prolonging charge lifetime. It results in a drastic improvement of VOC from 1.192 to 1.251 V, with a VOC loss of 0.48 V. The corresponding PSCs achieve a 21.8% PCE under 100 mW cm-2 illumination. Second, TA in HTL can coordinate with lithium cations, retarding their reaction with moisture and increasing the moisture stability of HTL. Consequently, the black phase of inorganic perovskite films is well preserved, and the corresponding PSCs maintain 90% of the initial PCE after 800 h storage at relative humidity of 25-35%, much higher than the control devices.

Iodonium Initiators: Paving the Air-free Oxidation of Spiro-OMeTAD for Efficient and Stable Perovskite Solar Cells

To date, perovskite solar cells (pero-SCs) with doped 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD) hole transporting layers (HTLs) have shown the highest recorded power conversion efficiencies (PCEs). However, their commercialization is still impeded by poor device stability owing to the hygroscopic lithium bis(trifluoromethanesulfonyl)imide and volatile 4-tert-butylpyridine dopants as well as time-consuming oxidation in air. In this study, we explored a series of single-component iodonium initiators with strong oxidability and different electron delocalization properties to precisely manipulate the oxidation states of Spiro-OMeTAD without air assistance, and the oxidation mechanism was clearly understood. Iodine (III) in the diphenyliodonium cation (IP+ ) can accept a single electron from Spiro-OMeTAD and forms Spiro-OMeTAD⋅+ owing to its strong oxidability. Moreover, because of the coordination of the strongly delocalized TFSI- with Spiro-OMeTAD⋅+ in a stable radical complex, the resulting hole mobility was 30 times higher than that of pristine Spiro-OMeTAD. In addition, the IP-TFSI initiator facilitated the growth of a homogeneous and pinhole-free Spiro-OMeTAD film. The pero-SCs based on this oxidizing HTL showed excellent efficiencies of 25.16 % (certified: 24.85 % for 0.062-cm2 ) and 20.71 % for a 15.03-cm2 module as well as remarkable overall stability.

Inhibition of Ion Migration for Highly Efficient and Stable Perovskite Solar Cells

In recent years, organic-inorganic halide perovskites are now emerging as the most attractive alternatives for next-generation photovoltaic devices, due to their excellent optoelectronic characteristics and low manufacturing cost. However, the resultant perovskite solar cells (PVSCs) are intrinsically unstable owing to ion migration, which severely impedes performance enhancement, even with device encapsulation. There is no doubt that the investigation of ion migration and the summarization of recent advances in inhibition strategies are necessary to develop "state-of-the-art" PVSCs with high intrinsic stability for accelerated commercialization. This review systematically elaborates on the generation and fundamental mechanisms of ion migration in PVSCs, the impact of ion migration on hysteresis, phase segregation, and operational stability, and the characterizations for ion migration in PVSCs. Then, many related works on the strategies for inhibiting ion migration toward highly efficient and stable PVSCs are summarized. Finally, the perspectives on the current obstacles and prospective strategies for inhibition of ion migration in PVSCs to boost operational stability and meet all of the requirements for commercialization success are summarized.

Multiple-ion Management of Perovskites by Regulating Spatial Distribution of Hydroxyls in Oligosaccharides

Suppressing migrations of intrinsic and extrinsic ions (e.g., Pb2+ , I- , FA+ /MA+ , and Li+ ) in organic-inorganic hybrid perovskites is critical for alleviating the hysteresis and degradation of perovskite solar cells (PSCs). However, various additives reported for that purpose usually interact with one or two types of those ions, not inhibiting multiple-ion migrations simultaneously. Two oligosaccharides (β-cyclodextrin (β-CD) and maltotetraose (G4)), containing 14 hydroxyls (-OH) with different spatial distributions, for the suppression of multiple-ion migrations in PSCs is herein employed. Compared to linear arrangement of -OH in G4, annular distribution of -OH around wide and narrow rims of β-CD can form supramolecular multi-site interactions in a focal manner with various ions, more effectively capturing and immobilizing these migrated ions. With this multiple-ion management strategy, β-CD-based PSCs exhibit an impressive efficiency of 24.22% with negligible hysteresis and excellent device stability. This work highlights the significances of multi-site interactions and molecular configuration of the additive for inhibiting multi-ion migrations in PSCs.

Inhibiting Li+ migration by thenoyltrifluoroacetone toward efficient and stable perovskite solar cells

Thenoyltrifluoroacetone (TTA) modifies the perovskite/spiro-OMeTAD interface to inhibit Li+ migration from the hole transport layer to the perovskite layer and improves the performance of perovskite solar cells.

Perovskite grain wrapping by converting interfaces and grain boundaries into robust and water-insoluble low-dimensional perovskites

Stabilizing perovskite solar cells requires consideration of all defective sites in the devices. Substantial efforts have been devoted to interfaces, while stabilization of grain boundaries received less attention. Here, we report on a molecule tributyl(methyl)phosphonium iodide (TPI), which can convert perovskite into a wide bandgap one-dimensional (1D) perovskite that is mechanically robust and water insoluble. Mixing TPI with perovskite precursor results in a wrapping of perovskite grains with both grain surfaces and grain boundaries converted into several nanometer-thick 1D perovskites during the grain formation process as observed by direct mapping. The grain wrapping passivates the grain boundaries, enhances their resistance to moisture, and reduces the iodine released during light soaking. The perovskite films with wrapped grains are more stable under heat and light. The best device with wrapped grains maintained 92.2% of its highest efficiency after light soaking under 1-sun illumination for 1900 hours at 55°C open-circuit condition.

Spiro-OMeTAD-Based Hole Transport Layer Engineering toward Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have undergone unprecedented growth in the past decade as an emerging photovoltaic technology. Up till now, the power conversion efficiency of PSCs has exceeded 25% that rivals silicon solar cells and there is still room for further enhancement. However, the development in long-term stability lags far behind, which remains a great concern for the commercial application in the future. The device instability mainly arises from the functional components, including perovskite film, charge transport layers, and electrodes along with the involved interfaces. As the most widely studied hole transport layer at the current stage, 2,2',7,7'-tetrakis(N,N-di(4-methoxyphenyl)amino)-9,9-spirobifluorene (Spiro-OMeTAD) helps contribute to the achievement of record efficiency but it weakens the device stability due to the doping-induced side effects such as hygroscopicity and ion migration. Great efforts are devoted to boosting the stability of Spiro-OMeTAD while maintaining excellent photovoltaic performance. In this review, the fundamental properties of Spiro-OMeTAD have been summarized and the recent advances in engineering Spiro-OMeTAD-based hole transport layer for the sake of highly efficient PSCs with enhanced longevity are highlighted. In the end, an outlook for the further optimization of Spiro-OMeTAD is provided and the issues related to large-scale production are discussed.

Oxidation of Spiro-OMeTAD in High-Efficiency Perovskite Solar Cells

2,2',7,7'-Tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD), as an organic small molecule material, is the most commonly employed hole transport material (HTM) in perovskite solar cells (PSCs) because of its excellent properties that result in high photovoltaic performances. However, the material still suffers from low conductivity, leading to the necessary use of dopants and oxidative processes to overcome this issue. The spiro-OMeTAD oxidation process is highlighted in this review, and the main parameters involved in the process have been studied. Furthermore, the best alternatives aiming to improve the spiro-OMeTAD electrical properties have been discussed. Lastly, this review concludes with suggestions and outlooks for further research directions.