Fibro-Gel: An All-Aqueous Hydrogel Consisting of Microfibers with Tunable Release Profile and its Application in Wound Healing

Affinity-Controlled Partitioning of Biomolecules at Aqueous Interfaces and Their Bioanalytic Applications

All-aqueous phase separation systems play essential roles in bioanalytical and biochemical applications. Compared to conventional oil and organic solvent-based systems, these systems are characterized by their rich bulk and interfacial properties, offering superior biocompatibility. In particular, phase separation in all-aqueous systems facilitates the creation of compartments with specific physicochemical properties, and therefore largely enhances the accessibility of the systems. In addition, the all-aqueous compartments have diverse affinities, with an important property known as partitioning, which can concentrate (bio)molecules toward distinct immiscible phases. This partitioning affinity imparts all-aqueous interfaces with selective permeability, enabling the controlled enrichment of target (bio)molecules. This review introduces the basic principles and applications of partitioning-induced interfacial phenomena in a typical all-aqueous system, namely aqueous two-phase systems (ATPSs); these applications include interfacial chemical reactions, bioprinting, and assembly, as well as bio-sensing and detection. The primary challenges associated with designing all-aqueous phase separation systems and several future directions are also discussed, such as the stabilization of aqueous interfaces, the handling of low-volume samples, and exploration of suitable ATPSs compositions with the efficient protocol.

Engineered Microfibers for Tissue Engineering

Hydrogel microfibers are hydrogel materials engineered into fiber structures. Techniques such as wet spinning, microfluidic spinning, and 3D bioprinting are often used to prepare microfibers due to their ability to precisely control the size, morphology, and structure of the microfibers. Microfibers with different structural morphologies have different functions; they provide a flow-through culture environment for cells to improve viability, and can also be used to induce the differentiation of cells such as skeletal muscle and cardiac muscle cells to eventually form functional organs in vitro through special morphologies. This Review introduces recent advances in microfluidics, 3D bioprinting, and wet spinning in the preparation of microfibers, focusing on the materials and fabrication methods. The applications of microfibers in tissue engineering are highlighted by summarizing their contributions in engineering biomimetic blood vessels, vascularized tissues, bone, heart, pancreas, kidney, liver, and fat. Furthermore, applications of engineered fibers in tissue repair and drug screening are also discussed.

Injectable Self-Healing Antibacterial Hydrogels with Tailored Functions by Loading Peptide Nanofiber-Biomimetic Silver Nanoparticles

Polymer hydrogels find extensive application in biomedicine, serving specific purposes such as drug delivery, biosensing, bioimaging, cancer therapy, tissue engineering, and others. In response to the growing threat of bacterial infections and the escalating resistance to conventional antibiotics, this research introduces a novel injectable, self-healing antimicrobial hydrogel comprising bioactive aldolized hyaluronic acid (AHA) and quaternized chitosan (QCS). This designed QCS/AHA hydrogel incorporates self-assembling peptide nanofibers (PNFs) and small-sized silver nanoparticles (AgNPs) for tailored functionality. The resulting hybrid QCS/AHA/PNF/AgNPs hydrogel demonstrates impressive rheological characteristics, broad-spectrum antimicrobial efficacy, and high biocompatibility. Notably, its antimicrobial effectiveness against Escherichia coli and S. aureus surpasses 99.9%, underscoring its potential for treating infectious wounds. Moreover, the rheological analysis confirms its excellent shear-thinning and self-healing properties, enabling it to conform closely to irregular wound surfaces. Furthermore, the cytotoxicity assessment reveals its compatibility with human umbilical vein endothelial cells, exhibiting no significant adverse effects. The combined attributes of this bioactive QCS/AHA/PNF/AgNPs hydrogel position it as a promising candidate for antimicrobial applications and wound healing.

Exploring the potential of all-aqueous immiscible systems for preparing complex biomaterials and cellular constructs

All-aqueous immiscible systems derived from liquid-liquid phase separation of incompatible hydrophilic agents such as polymers and salts have found increasing interest in the biomedical and tissue engineering fields in the last few years. The unique characteristics of aqueous interfaces, namely their low interfacial tension and elevated permeability, as well as the non-toxic environment and high water content of the immiscible phases, confer to these systems optimal qualities for the development of biomaterials such as hydrogels and soft membranes, as well as for the preparation of in vitro tissues derived from cellular assembly. Here, we overview the main properties of these systems and present a critical review of recent strategies that have been used for the development of biomaterials with increased levels of complexity using all-aqueous immiscible phases and interfaces, and their potential as cell-confining environments for micropatterning approaches and the bioengineering of cell-rich structures. Importantly, due to the relatively recent emergence of these areas, several key design considerations are presented, in order to guide researchers in the field. Finally, the main present challenges, future directions, and adaptability to develop advanced materials with increased biomimicry and new potential applications are briefly evaluated.

Triple-Mechanism Enhanced Flexible SiO2 Nanofiber Composite Hydrogel with High Stiffness and Toughness for Cartilaginous Ligaments

Hydrogels are widely used in tissue engineering, soft robotics and wearable electronics. However, it is difficult to achieve both the required toughness and stiffness, which severely hampers their application as load-bearing materials. This study presents a strategy to develop a hard and tough composite hydrogel. Herein, flexible SiO2 nanofibers (SNF) are dispersed homogeneously in a polyvinyl alcohol (PVA) matrix using the synergistic effect of freeze-drying and annealing through the phase separation, the modulation of macromolecular chain movement and the promotion of macromolecular crystallization. When the stress is applied, the strong molecular interaction between PVA and SNF effectively disperses the load damage to the substrate. Freeze-dried and annealed-flexible SiO2 nanofibers/polyvinyl alcohol (FDA-SNF/PVA) reaches a preferred balance between enhanced stiffness (13.71 ± 0.28 MPa) and toughness (9.9 ± 0.4 MJ m-3). Besides, FDA-SNF/PVA hydrogel has a high tensile strength of 7.84 ± 0.10 MPa, super elasticity (no plastic deformation under 100 cycles of stretching), fast deformation recovery ability and excellent mechanical properties that are superior to the other tough PVA hydrogels, providing an effective way to optimize the mechanical properties of hydrogels for potential applications in artificial tendons and ligaments.

Carboxymethyl chitosan-based hydrogel-Janus nanofiber scaffolds with unidirectional storage-drainage of biofluid for accelerating full-thickness wound healing

Self-pumping wound scaffolds designed for directional biofluid transport are extensively investigated. They efficiently extract excessive biofluids from wounds, while maintaining an optimally humid wound environment, thus facilitating rapid wound healing. However, the existing designed scaffolds are insufficiently focused on stimulating the hydrophobic layer at the wound site, thereby exacerbating inflammation and impeding the wound healing process. Herein, we engineered and fabricated a hydrophilic-hydrophobic-hydrophilic sandwich-structured hydrogel-Janus nanofiber scaffold (NFS) employing a Layer-by-Layer (LbL) method. This scaffold comprises a hydrophilic carboxymethyl chitosan/silver (CMCS-Ag) hydrogel component in conjunction with a poly(caprolactone)/poly(caprolactone)-poly(citric acid)-co-ε-polylysine (PCL/PCL-PCE) Janus NFS. It is noteworthy that the hydrogel-Janus nanofiber scaffold not only demonstrates outstanding water absorption (202.2 %) and unidirectional biofluid transport capability but also possesses high breathability (308.663 m3/m2 h kPa), appropriate pore size (6.7-7.5 μm), excellent tensile performance (270 ± 10 %), and superior mechanical strength (26.36 ± 1.77 MPa). Moreover, in vitro experimentation has convincingly demonstrated the impeccable biocompatibility of hydrogel-Janus NFS. The inherent dual-antibacterial properties in CMCS-Ag and PCE significantly augment fibroblast proliferation and migration. In vivo studies further underscore its capability to expedite wound healing by absorption and expulsion of wound exudates, thereby fostering collagen deposition and vascularization. As such, this work potentially provides fresh insights into the design and fabrication of multifunctional biomimetic scaffolds, holding immense potential in the medical field for efficient wound healing.

A Multifunctional Herb-Derived Glycopeptide Hydrogel for Chronic Wound Healing

Chronic wounds constitute an increasingly prevalent global healthcare issue, characterized by recurring bacterial infections, pronounced oxidative stress, compromised functionality of immune cells, unrelenting inflammatory reactions, and deficits in angiogenesis. In response to these multifaceted challenges, the study introduced a stimulus-responsive glycopeptide hydrogel constructed by oxidized Bletilla striata polysaccharide (OBSP), gallic acid-grafted ε-Polylysine (PLY-GA), and paeoniflorin-loaded micelles (MIC@Pae), called OBPG&MP. The hydrogel emulates the structure of glycoprotein fibers of the extracellular matrix (ECM), exhibiting exceptional injectability, self-healing, and biocompatibility. It adapts responsively to the inflammatory microenvironment of chronic wounds, sequentially releasing therapeutic agents to eradicate bacterial infection, neutralize reactive oxygen species (ROS), modulate macrophage polarization, suppress inflammation, and encourage vascular regeneration and ECM remodeling, playing a critical role across the inflammatory, proliferative, and remodeling phases of wound healing. Both in vitro and in vivo studies confirmed the efficacy of OBPG&MP hydrogel in regulating the wound microenvironment and enhancing the regeneration and remodeling of chronic wound skin tissue. This research supports the vast potential for herb-derived multifunctional hydrogels in tissue engineering and regenerative medicine.

High-throughput measurement of elastic moduli of microfibers by rope coiling

There are many fields where it is of interest to measure the elastic moduli of tiny fragile fibers, such as filamentous bacteria, actin filaments, DNA, carbon nanotubes, and functional microfibers. The elastic modulus is typically deduced from a sophisticated tensile test under a microscope, but the throughput is low and limited by the time-consuming and skill-intensive sample loading/unloading. Here, we demonstrate a simple microfluidic method enabling the high-throughput measurement of the elastic moduli of microfibers by rope coiling using a localized compression, where sample loading/unloading are not needed between consecutive measurements. The rope coiling phenomenon occurs spontaneously when a microfiber flows from a small channel into a wide channel. The elastic modulus is determined by measuring either the buckling length or the coiling radius. The throughput of this method, currently 3,300 fibers per hour, is a thousand times higher than that of a tensile tester. We demonstrate the feasibility of the method by testing a nonuniform fiber with axially varying elastic modulus. We also demonstrate its capability for in situ inline measurement in a microfluidic production line. We envisage that high-throughput measurements may facilitate potential applications such as screening or sorting by mechanical properties and real-time control during production of microfibers.

Fabrication of antimicrobial cationic hydrogels driven by physically and chemically crosslinking for wound healing

The wound therapy based on antibiotic delivery inevitably leads to the emergence of drug resistance. Hydrogel biomaterials with inherent antibacterial activities have emerged as promising candidates for addressing this issue. However, developing an inherently antibacterial hydrogel through simple and facile strategies to promote localized wound infection healing remains a challenge. In this study, we successfully constructed antimicrobial cationic hydrogels with self-healing and injectable properties through physically and chemically dual-crosslinked networks. The networks were formed by the copolymers poly[(di(ethylene glycol) methyl ether methacrylate)-co-(4-formylphenyl methacrylate)-co-(2-(methacryloyloxy)ethyl]trimethylammonium chloride solution)] (PDFM) and poly[(di(ethylene glycol) methyl ether methacrylate)-co-(2-aminoethyl methacrylate hydrochloride)-co-(2-(((6-(6-methyl-4[1H]pyrimidionylureido) hexyl)carbamoyl)oxy)ethyl methacrylate)] (PDAU). The hydrogel systems effectively facilitate the regeneration and healing of infected wounds through the contact bactericidal feature of quaternary ammonium cations. The presence of Schiff base bonds in the injectable hydrogels imparts remarkable pH responsiveness and self-healing properties. In vitro experiments verified their intrinsic antibacterial activities along with their favorable cytocompatibility and hemocompatibility in both in vitro and in vivo. In addition, the hydrogel significantly accelerated the healing of bacterially infected in a full-thickness skin wound. This facilely prepared dual-crosslinked hydrogel, without antibiotics loading, holds significant prospects for treating infected wounds.

Connective tissue inspired elastomer-based hydrogel for artificial skin via radiation-indued penetrating polymerization

Robust hydrogels offer a candidate for artificial skin of bionic robots, yet few hydrogels have a comprehensive performance comparable to real human skin. Here, we present a general method to convert traditional elastomers into tough hydrogels via a unique radiation-induced penetrating polymerization method. The hydrogel is composed of the original hydrophobic crosslinking network from elastomers and grafted hydrophilic chains, which act as elastic collagen fibers and water-rich substances. Therefore, it successfully combines the advantages of both elastomers and hydrogels and provides similar Young's modulus and friction coefficients to human skin, as well as better compression and puncture load capacities than double network and polyampholyte hydrogels. Additionally, responsive abilities can be introduced during the preparation process, granting the hybrid hydrogels shape adaptability. With these unique properties, the hybrid hydrogel can be a candidate for artificial skin, fluid flow controller, wound dressing layer and many other bionic application scenarios.

Body temperature-induced adhesive hyaluronate/gelatin-based hybrid hydrogel dressing for promoting skin regeneration

Skin wound management faces significant clinical challenges, including continuous bacterial infection and inflammation. Therefore, developing removable hydrogel dressings with intrinsic multifunctional properties is highly desirable. In this study, a body temperature-induced adhesive and removable hydrogel was designed to treat skin defect wounds. The HA/Gel-R-Ag hybrid gel was prepared by incorporating a silver ion-crosslinked sulfhydryl hyaluronate/gelatin-based polymeric gel network into a supramolecular rhein gel network, thereby significantly enhancing its mechanical properties. Temperature-responsive gelatin chains give the hybrid gel reversible tissue adhesiveness and detachment, thus avoiding secondary injury to wounds when changing the hydrogels. The hybrid gel exhibited excellent bactericidal ability owing to the antibacterial capacity of the silver ions and rhein. Moreover, both HA and rhein endowed the hybrid gel with immunoregulatory effects by promoting macrophage polarization from pro-inflammatory M1 phenotype to anti-inflammatory M2 phenotype. In a full-thickness skin defect mouse mode, this porous, degradable, and biocompatible HA/Gel-R-Ag hybrid gel boosted skin regeneration by inhibiting inflammation and promoting collagen deposition and angiogenesis. It is thus a simple method for widening the application range of mechanically weak rhein gels and providing a promising wound dressing material with multiple intrinsic functions for treating skin wounds.

Metal-organic gels: recent advances in their classification, characterization, and application in the pharmaceutical field

Metal-organic gels (MOGs) are a type of functional soft substance with a three-dimensional (3D) network structure and solid-like rheological behavior, which are constructed by metal ions and bridging ligands formed under the driving force of coordination interactions or other non-covalent interactions. As the homologous substances of metal-organic frameworks (MOFs) and gels, they exhibit the potential advantages of high porosity, flexible structure, and adjustable mechanical properties, causing them to attract extensive research interest in the pharmaceutical field. For instance, MOGs are often used as excellent vehicles for intelligent drug delivery and programmable drug release to improve the clinical curative effect with reduced side effects. Also, MOGs are often applied as advanced biomedical materials for the repair and treatment of pathological tissue and sensitive detection of drugs or other molecules. However, despite the vigorous research on MOGs in recent years, there is no systematic summary of their applications in the pharmaceutical field to date. The present review systematically summarize the recent research progress on MOGs in the pharmaceutical field, including drug delivery systems, drug detection, pharmaceutical materials, and disease therapies. In addition, the formation principles and classification of MOGs are complemented and refined, and the techniques for the characterization of the structures/properties of MOGs are overviewed in this review.

Multiple Bio-Actives Loaded Gellan Gum Microfibers from Microfluidics for Wound Healing

Wound healing, known as a fundamental healthcare issue worldwide, has been attracting great attention from researchers. Here, novel bioactive gellan gum microfibers loaded with antibacterial peptides (ABPs) and vascular endothelial growth factor (VEGF) are proposed for wound healing by using microfluidic spinning. Benefitting from the high controllability of microfluidics, bioactive microfibers with uniform morphologies are obtained. The loaded ABPs are demonstrated to effectively act on bacteria at the wound site, reducing the risk of bacterial infection. Besides, sustained release of VEGF from microfibers helps to accelerate angiogenesis and further promote wound healing. The practical value of woven bioactive microfibers is demonstrated via animal experiments, where the wound healing process is greatly facilitated because of the excellent circulation of air and nutritious substances. Featured with the above properties, it is believed that the novel bioactive gellan gum microfibers would have a remarkable effect in the field of biomedical application, especially in promoting wound healing.

A Whole-Course-Repair System Based on Neurogenesis-Angiogenesis Crosstalk and Macrophage Reprogramming Promotes Diabetic Wound Healing

Diabetic wound (DW) therapy is currently a big challenge in medicine and strategies to enhance neurogenesis and angiogenesis have appeared to be a promising direction. However, the current treatments have failed to coordinate neurogenesis and angiogenesis simultaneously, leading to an increased disability rate caused by DWs. Herein, a whole-course-repair system is introduced by a hydrogel to concurrently achieve a mutually supportive cycle of neurogenesis-angiogenesis under a favorable immune-microenvironment. This hydrogel can first be one-step packaged in a syringe for later in situ local injections to cover wounds long-termly for accelerated wound healing via the synergistic effect of magnesium ions (Mg²⁺ ) and engineered small extracellular vesicles (sEVs). The self-healing and bio-adhesive properties of the hydrogel make it an ideal physical barrier for DWs. At the inflammation stage, the formulation can recruit bone marrow-derived mesenchymal stem cells to the wound sites and stimulate them toward neurogenic differentiation, while providing a favorable immune microenvironment via macrophage reprogramming. At the proliferation stage of wound repair, robust angiogenesis occurs by the synergistic effect of the newly differentiated neural cells and the released Mg²⁺ , allowing a regenerative neurogenesis-angiogenesis cycle to take place at the wound site. This whole-course-repair system provides a novel platform for combined DW therapy.