Microwave-enhanced hydrolysis of cellulose by acidic ionic liquids

In the [Bmim]Cl reaction medium, five different acidic ionic liquids were used as catalysts to study the effects of reaction time, reaction temperature, system water content, catalyst dosage, microwave power, and other factors on cellulose hydrolysis under microwave irradiation. The results showed that in the [Bmim]Cl reaction system, using N-methylpyrrolidone methylsulfonic acid salt as a catalyst, controlling the microwave reaction time at 10 min, reaction temperature at 130 °C, catalyst dosage at 1 g/g (cellulose), water addition at 0.756 μL/g ([Bmim]Cl), and microwave power at 480 W, resulted in the best cellulose hydrolysis effect with a glucose yield of 74.49%. Compared to conventional heating, the glucose yield increased by 24% and the hydrolysis time was reduced by 77%. Microwave irradiation significantly enhances the cellulose hydrolysis process in an ionic liquid medium.

Designing for Degradation: Transient Devices Enabled by (Nano)Cellulose

Transient technology involves materials and devices that undergo controlled degradation after a reliable operation period. This groundbreaking strategy offers significant advantages over conventional devices based on non-renewable materials by limiting environmental exposure to potentially hazardous components after disposal, and by increasing material circularity. As the most abundant naturally occurring polymer on Earth, cellulose is an attractive material for this purpose. Besides, (nano)celluloses are inherently biodegradable and have competitive mechanical, optical, thermal, and ionic conductivity properties that can be exploited to develop sustainable devices and avoid the end-of-life issues associated with conventional systems. Despite its potential, few efforts have been made to review current advances in cellulose-based transient technology. Therefore, this review catalogs the state-of-the-art developments in transient devices enabled by cellulosic materials. To provide a wide perspective, the various degradation mechanisms involved in cellulosic transient devices are introduced. The advanced capabilities of transient cellulosic systems in sensing, photonics, energy storage, electronics, and biomedicine are also highlighted. Current bottlenecks toward successful implementation are discussed, with material circularity and environmental impact metrics at the center. It is believed that this review will serve as a valuable resource for the proliferation of cellulose-based transient technology and its implementation into fully integrated, circular, and environmentally sustainable devices.

Cellulose nanocrystals in the development of biodegradable materials: A review on CNC resources, modification, and their hybridization

The escalating demand for sustainable materials has propelled cellulose into the spotlight as a promising alternative to petroleum-based products. As the most abundant organic polymer on Earth, cellulose is ubiquitous, found in plants, bacteria, and even a unique marine animal-the tunicate. Cellulose polymers naturally give rise to microscale semi-crystalline fibers and nanoscale crystalline regions known as cellulose nanocrystals (CNCs). Exhibiting rod-like structures with widths spanning 3 to 50 nm and lengths ranging from 50 nm to several microns, CNC characteristics vary based on the cellulose source. The degree of crystallinity, crucial for CNC properties, fluctuates between 49 and 95 % depending on the source and synthesis method. CNCs, with their exceptional properties such as high aspect ratio, relatively low density (≈1.6 g cm-3), high axial elastic modulus (≈150 GPa), significant tensile strength, and birefringence, emerge as ideal candidates for biodegradable fillers in nanocomposites and functional materials. The percolation threshold, a mathematical concept defining long-range connectivity between filler and polymer, governs the effectiveness of reinforcement in nanocomposites. This threshold is intricately influenced by the aspect ratio and molecular interaction strength, impacting CNC performance in polymeric and pure nanocomposite materials. This comprehensive review explores diverse aspects of CNCs, encompassing their derivation from various sources, methods of modification (both physical and chemical), and hybridization with heterogeneous fillers. Special attention is devoted to the hybridization of CNCs derived from tunicates (TCNC) with those from wood (WCNC), leveraging the distinct advantages of each. The overarching objective is to demonstrate how this hybridization strategy mitigates the limitations of WCNC in composite materials, offering improved interaction and enhanced percolation. This, in turn, is anticipated to elevate the reinforcing effects and pave the way for the development of nanocomposites with tunable viscoelastic, physicochemical, and mechanical properties.

Reactivity of metal-oxo clusters towards biomolecules: from discrete polyoxometalates to metal-organic frameworks

Metal-oxo clusters hold great potential in several fields such as catalysis, materials science, energy storage, medicine, and biotechnology. These nanoclusters of transition metals with oxygen-based ligands have also shown promising reactivity towards several classes of biomolecules, including proteins, nucleic acids, nucleotides, sugars, and lipids. This reactivity can be leveraged to address some of the most pressing challenges we face today, from fighting various diseases, such as cancer and viral infections, to the development of sustainable and environmentally friendly energy sources. For instance, metal-oxo clusters and related materials have been shown to be effective catalysts for biomass conversion into renewable fuels and platform chemicals. Furthermore, their reactivity towards biomolecules has also attracted interest in the development of inorganic drugs and bioanalytical tools. Additionally, the structural versatility of metal-oxo clusters allows for the efficiency and selectivity of the biomolecular reactions they promote to be readily tuned, thereby providing a pathway towards reaction optimization. The properties of the catalyst can also be improved through incorporation into solid supports or by linking metal-oxo clusters together to form Metal-Organic Frameworks (MOFs), which have been demonstrated to be powerful heterogeneous catalysts. Therefore, this review aims to provide a comprehensive and critical analysis of the state of the art on biomolecular transformations promoted by metal-oxo clusters and their applications, with a particular focus on structure-activity relationships.

Preparation of nanocellulose and its applications in wound dressing: A review

Nanocellulose, as a nanoscale polymer material, has garnered significant attention worldwide due to its numerous advantages including excellent biocompatibility, thermal stability, non-toxicity, large specific surface area, and good hydrophilicity. Various methods can be employed for the preparation of nanocellulose. Traditional approaches such as mechanical, chemical, and biological methods possess their own distinct characteristics and limitations. However, with the growing deterioration of our living environment, several green and environmentally friendly preparation techniques have emerged. These novel approaches adopt eco-friendly technologies or employ green reagents to achieve environmental sustainability. Simultaneously, there is a current research focus on optimizing traditional nanocellulose preparation methods while addressing their inherent drawbacks. The combination of mechanical and chemical methods compensates for the limitations associated with using either method alone. Nanocellulose is widely used in wound dressings owing to its exceptional properties, which can accelerate the wound healing process and reduce patient discomfort. In this paper, the principle, advantages and disadvantages of each preparation method of nanocellulose and the research findings in recent years are introduced Moreover, this review provides an overview of the utilization of nanocellulose in wound dressing applications. Finally, the prospective trends in its development alongside corresponding preparation techniques are discussed.

Physicochemical, thermal, pasting, morphological, functional and bioactive binding characteristics of starches of different oat varieties of North-Western Himalayas

Starches were isolated from five oat varieties (SFO-1, SFO-3, Sabzar, SKO-20 and SKO-96) grown in North-Western Himalayas of India. Moisture content of the varieties ranged from 9.25 ± 0.09 to 13.21 ± 0.11 %, indicating their shelf-stability. Results suggested >90 % purity of starches as was evident from values of ash, proteins, and lipids. Amylose content results showed that all starches fall within category of intermediate-amylose starches. Lambdamax, blue value and OD620/550 were found significantly (p ≤ 0.05) higher in SKO-20. Sabzar exhibited higher starch hydrolysis percentage of 85.16 % whereas, lowest was observed in SKO-20 (78.12 %). Degree of syneresis was higher in SKO-20 however, its freeze-thaw stability was lesser. Wide peak in FTIR spectra at 3320 cm-1 confirms nature of starches. SKO-20 exhibited significantly higher onset gelatinization temperature (65.19 ± 1.06 °C) and enthalpy (15.78 ± 0.15 J/g) whereas, Sabzar exhibited lowest enthalpy. Pasting characteristics indicated lowest and highest final viscosity in SKO-20 (341.30 ± 2.11 mPas) and SKO-96 (1470 ± 4.56 mPas), respectively. SEM results indicated irregular and polygonal shape of starches with size <10 μm. SKO-20 exhibited lowest disintegration time of 2.08 ± 0.01 min and Sabzar showed highest (3.31 ± 0.07 min). SKO-20 released more curcumin (71.28 %) whereas, Sabzar released less. This suggests that SKO-20 could be used as better excipient for delivery of curcumin at target site.

A Comparison of Dilute Aqueous Isethionic Acid and Sulfuric Acid in Hydrolysis of Three Different Untreated Lignocellulosic Biomass Varieties

Efficient catalytic hydrolysis of lignocellulosic biomass to sugars is a major challenge in the production of sustainable biofuels and chemical feedstocks. In this study isethionic acid was compared with H2SO4 for hydrolysis of polysaccharides in corn stover, switch grass, and poplar. The catalytic activities of acids were compared by analysis of total reducing sugar (TRS) and glucose yields in a sequence of experiments in water at 90-190 °C using 0.050 mol of H+/L isethionic acid and H2SO4. In comparison to using H2SO4, the use of isethionic acid catalyst lowered the maximum TRS percent yield temperatures by 25, 24, and 21% for corn stover, switch grass, and poplar. A similar effect was observed for glucose percent yields as well. This temperature reduction is due to lowering of the activation energy in the polysaccharide depolymerization reaction and most likely due to hydrogen-bonding-type dipolar interactions between the isethionic acid -OH group and -OH groups in biomass polysaccharides.

Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Ionic liquids (ILs) consisting entirely of ions exhibit many fascinating and tunable properties, making them promising functional materials for a large number of energy-related applications. For example, ILs have been employed as electrolytes for electrochemical energy storage and conversion, as heat transfer fluids and phase-change materials for thermal energy transfer and storage, as solvents and/or catalysts for CO2 capture, CO2 conversion, biomass treatment and biofuel extraction, and as high-energy propellants for aerospace applications. This paper provides an extensive overview on the various energy applications of ILs and offers some thinking and viewpoints on the current challenges and emerging opportunities in each area. The basic fundamentals (structures and properties) of ILs are first introduced. Then, motivations and successful applications of ILs in the energy field are concisely outlined. Later, a detailed review of recent representative works in each area is provided. For each application, the role of ILs and their associated benefits are elaborated. Research trends and insights into the selection of ILs to achieve improved performance are analyzed as well. Challenges and future opportunities are pointed out before the paper is concluded.

Efficient Reaction Systems for Lignocellulosic Biomass Conversion to Furan Derivatives: A Minireview

Lignocellulosic biomass as abundant, renewable, and sustainable carbon feedstock is an alternative to relieve the dependence on fossil fuels and satisfy the demands of chemicals and materials. Conversions of lignocellulosic biomass to high-value-added chemicals have drawn much attention recently due to the high availability of sustainable ways. This minireview surveys the recent trends in lignocellulosic biomass conversion into furan derivatives based on the following systems: (1) ionic liquids, (2) deep eutectic solvents, and (3) biphasic systems. Moreover, the current challenges and future perspectives in the development of efficient routes for lignocellulosic biomass conversion are provided.

Highly selective separation of eucalyptus hemicellulose by salicylic acid treatment with both aromatic and hydroxy acids

Aromatic and hydroxyl acid treatments demonstrate their respective characteristics for the separation of lignocellulosic biomass. In this study, the effect of salicylic acid (SA-A) treatment on the separation of eucalyptus components with both aromatic and hydroxyl acid properties was analyzed. The optimal conditions were SA-A concentration 9.0%, reaction temperature 140 °C and time 75 min. The separation yield of xylose was 85.93%. The separation of cellulose and lignin was inhibited by SA-A treatment in contrast to the separation by glycolic acid and p-toluenesulfonic acid treatment. Moreover, SA-A treatment resulted in a larger fiber crystallinity index and higher thermal stability. The SA-A-treated samples contained lignin that was rich in β-O-4 and hydroxyl groups. The degradation and condensation of lignin was inhibited. The selectivity of aromatic acids for separating hemicellulose and protecting the lignin structure using hydroxy acids was demonstrated. Thus, new and efficient organic acid treatments can be developed.

Nanocellulose, a versatile platform: From the delivery of active molecules to tissue engineering applications

Nanocellulose, a biopolymer, has received wide attention from researchers owing to its superior physicochemical properties, such as high mechanical strength, low density, biodegradability, and biocompatibility. Nanocellulose can be extracted from wide range of sources, including plants, bacteria, and algae. Depending on the extraction process and dimensions (diameter and length), they are categorized into three main types: cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and bacterial nanocellulose (BNC). CNCs are a highly crystalline and needle-like structure, whereas CNFs have both amorphous and crystalline regions in their network. BNC is the purest form of nanocellulose. The nanocellulose properties can be tuned by chemical functionalization, which increases its applicability in biomedical applications. This review highlights the fabrication of different surface-modified nanocellulose to deliver active molecules, such as drugs, proteins, and plasmids. Nanocellulose-mediated delivery of active molecules is profoundly affected by its topographical structure and the interaction between the loaded molecules and nanocellulose. The applications of nanocellulose and its composites in tissue engineering have been discussed. Finally, the review is concluded with further opportunities and challenges in nanocellulose-mediated delivery of active molecules.

A highly crosslinked, mesoporous poly(ionic liquid) containing salen–Pd for efficient, eco-friendly Suzuki–Miyaura coupling reactions

Mesoporous poly(ionic liquid) obtained by hyper-crosslinking of a salen-containing poly(ionic liquid) can efficiently catalyze Suzuki–Miyaura coupling reactions with excellent recyclability under an air atmosphere in 50% aqueous ethanol.

Multilayer photonic films based on interlocked chiral-nematic cellulose nanocrystals in starch/chitosan

In this study, a new approach to employ and control cellulose nanocrystal (CNC) chiral nematic structure as a biodegradable, intelligent material was investigated. Tuned CNC self-assembled films were interlocked between two layers of citric acid, cross-linked starch/chitosan (1:1) films through the solvent casting process. This method increased the mechanical properties of produced films and created a selective reflection band from UV to near-IR depending on the helical pitch of the chiral nematic CNC layer. The features of these intelligent films have potential for different applications, from UV protective packaging to biomedical uses. The water vapor permeability (WVP) of the produced films decreased considerably by adding a CNC layer into the cross-linked starch/chitosan structure. Also, the WVP was different for the different helical pitches of the CNC layer. The starch/chitosan (outer layer) also showed a remarkable antibacterial property against E. coli, P. fluorescens, S. Enteritidis, and S. aureus which could be useful for biomedical applications or antibacterial packaging.

Hydrolysis of Oligosaccharides and Polysaccharides on Sulfonated Solid Acid Catalysts: Relations between Adsorption Properties and Catalytic Activities

Sulfonated solid acid materials, such as sulfonated carbon catalysts, are promising materials as heterogeneous catalysts for the hydrolysis of esters and polysaccharides in water solvents. The catalytic active site is a sulfonic acid functional group. Compared to conventional strong acidic ion-exchange resin catalysts, sulfonated carbon materials have less sulfonic acid functional groups but higher catalytic activity for hydrolysis of polysaccharides per catalyst weight. However, the details of catalytic properties and the substrate suitability of both catalysts are unclear. In this study, the hydrolytic activities and the adsorption properties of both catalysts were investigated for various oligosaccharides and polysaccharides with varying degrees of polymerization (DP). The catalytic activities for the hydrolysis with increase of the DP of saccharides were found to increase over the sulfonated carbon catalyst but decrease over strong acidic ion-exchange resin catalyst. The inverse catalytic properties attribute to the dependence of the amounts of adsorption and/or penetration of saccharides on the DP. Moreover, the catalytic activity per acidic sites of strong acidic ion-exchange resin is in good agreement with the value obtained by multiplying the catalytic activity of a dilute sulfuric acid by the penetration degrees.

Microcrystalline cellulose (MCC) based materials as emerging adsorbents for the removal of dyes and heavy metals - A review

In an attempt to overcome such threats posed by water pollution, various processes ranging from physical, chemical as well as biological were applied to get rid of wastewater pollutants. The simplicity, high efficiency and cheapness of an adsorption process make it the most widely used among various other processes. Adsorbents with different properties were used in the adsorption process but this paper was focused on reviewing various articles published by numerous researchers on the isolation of microcrystalline cellulose (MCC), a popular carbohydrate polymer from lignocellulosic biomass and utilization of MCC based materials as effective adsorbents for the successful removal of dyes and heavy metals from synthetic wastewater. The sudden interest on MCC and MCC-based materials as adsorbents cannot be separated from their excellent properties such as renewability, biodegradability, biocompatibility, economic value, non-toxicity, high mechanical properties and surface area. Upon comparison with established adsorbents reported from literature, MCC-based materials performed excellently well in the adsorption of dyes and heavy metals with Langmuir isotherm and pseudo-second order reported mostly as the best fit models for the generated equilibrium and kinetic data, respectively pointing at the distribution of adsorption sites to be homogeneous as well as the formation of monolayer adsorbate on their surfaces. The various thermodynamic studies reported further revealed the adsorption processes of both dyes and heavy metals onto MCC-based materials to be entropy driven processes, spontaneous, and endothermic. Finally, future research was suggested to focus on optimization to enhance the performance of the MCC-based adsorbents, carrying out the adsorption on real wastewater instead of synthetic ones as well as expanding the range of adsorbates to include other contaminants such as chlorophenols, herbicides, pesticides and others in addition to dyes and heavy metals.

Catalytic Production of Oxygenated and Hydrocarbon Chemicals From Cellulose Hydrogenolysis in Aqueous Phase

As the most abundant polysaccharide in lignocellulosic biomass, a clean and renewable carbon resource, cellulose shows huge capacity and roused much attention on the methodologies of its conversion to downstream products, mainly including platform chemicals and fuel additives. Without appropriate treatments in the processes of cellulose decompose, there are some by-products that may not be chemically valuable or even truly harmful. Therefore, higher selectivity and more economical and greener processes would be favored and serve as criteria in a correlational study. Aqueous phase, an economically accessible and immensely potential reaction system, has been widely studied in the preparation of downstream products of cellulose. Accordingly, this mini-review aims at making a related summary about several conversion pathways of cellulose to target products in aqueous phase. Mainly, there are four categories about the conversion of cellulose to downstream products in the following: (i) cellulose hydrolysis hydrogenation to saccharides and sugar alcohols, like glucose, sorbitol, mannose, etc.; (ii) selective hydrogenolysis leads to the cleavage of the corresponding glucose C-C and C-O bond, like ethylene glycol (EG), 1,2-propylene glycol (PG), etc.; (iii) dehydration of fructose and further oxidation, like 5-hydroxymethylfurfural (HMF), 2,5-furandicarboxylic acid (FDCA), etc.; and (iv) production of liquid alkanes via hydrogenolysis and hydrodeoxygenation, like pentane, hexane, etc. The representative products were enumerated, and the mechanism and pathway of mentioned reaction are also summarized in a brief description. Ultimately, the remaining challenges and possible further research objects are proposed in perspective to provide researchers with a lucid research direction.

Study on reaction mechanism of superior bamboo biochar catalyst production by molten alkali carbonates pyrolysis and its application for cellulose hydrolysis

Biochar has attracted wide interest due to its important role in the synthesis of functionalized carbon materials. Molten alkali carbonates (MC) pyrolysis as a novel mean was explored to obtain superior bamboo biochar compared with alkali impregnation pretreating bamboo powder associated with pyrolysis. The properties of biochar produced by MC pyrolysis were enhanced, suggesting an increase in BET surface area of 43.59 m²/g compared with non-pretreat biochar of 5.76 m²/g, and possessed preferable pore structure than the alkali impregnation one of 39.82 m²/g and 16.98 nm for catalyst support. Besides, pyrolysis temperature reinforced the porosity and the degree of carbonization as it rising, however, the optimized temperature for top-grade biochar materials was 450 °C. The MC weakened the hydrogen bonds network in bamboo powder acting a similar role just as alkaline pretreated, meanwhile neutralized the acid produced during pyrolysis process supported by the analysis of FTIR and TGA. The potential pathways of biomass pyrolysis with MC had also been proposed. In addition, the biochar obtained was utilized as a catalyst support of biochar-bearing sulfonic acid groups, which achieved the remarkable yields of TRS and glucose (52.8% and 43.5%) in hydrolysis of cellulose.

Stimuli-responsive self-assembly of cellulose nanocrystals (CNCs): Structures, functions, and biomedical applications

Cellulose nanocrystals (CNCs) have received a significant amount of attention from the researchers. It is used as a nanomaterial for various applications due to its excellent physiochemical properties for the last few decades. Self-assembly is a phenomenon where autonomous reorganization of randomly oriented species occurs elegantly. Self-assembly is responsible for the formation of the hierarchical cholesteric structure of CNCs. This process is highly influenced by several factors, such as the surface chemistry of the nanoparticles, intermolecular forces, and the fundamental laws of thermodynamics. Various conventional experimental designs and molecular dynamics (MD) studies have been applied to determine the possible mechanism of self-assembly in CNCs. Different external factors, like pH, temperature, magnetic/electric fields, vacuum, also influence the self-assembly process in CNCs. Notably, better responses have been observed in CNCs-grafted polymer nanocomposites. These functionalized CNCs with stimuli-responsive self-assembly have immense practical applications in modern biotechnology and medicine. Herein, we have concisely discussed the mechanism of the self-assembled CNCs in the presence of different external factors such as pH, temperature, electric/magnetic fields, and their biomedical applications.

Evolution Process and Controlled Synthesis of Humins with 5-Hydroxymethylfurfural (HMF) as Model Molecule

Elucidation of the chemical structure and formation mechanism of humins is a requisite to further improve the efficiency of acid-catalyzed biomass conversion. Through a low-temperature approach, the key intermediates resulting in the formation of 5-hydroxymethylfurfural (HMF)-derived humins were captured, revealing multiple elementary reactions such as etherification, esterification, aldol condensation, and acetalization. Through humin characterization, it was found out that the aldol condensation moiety between aldehyde group and levulinic acid is critical to justify the characteristic IR peaks (1620 and 1710 cm^-1 ) and aromatic fragments from pyrolysis GC-MS. Based on the investigations by means of HPLC-MS/MS, IR, pyrolysis GC-MS, and SEM, the structural models of humins at different temperatures were proposed, which are comprised of the elementary reaction types confirmed by the key intermediates. Humin structures with varying content of aldol condensation could be controllably synthesized under different reaction conditions (temperature and time), demonstrating the evolution process of HMF-derived humins.

A Review on the Partial and Complete Dissolution and Fractionation of Wood and Lignocelluloses Using Imidazolium Ionic Liquids

Ionic liquids have shown great potential in the last two decades as solvents, catalysts, reaction media, additives, lubricants, and in many applications such as electrochemical systems, hydrometallurgy, chromatography, CO2 capture, etc. As solvents, the unlimited combinations of cations and anions have given ionic liquids a remarkably wide range of solvation power covering a variety of organic and inorganic materials. Ionic liquids are also considered "green" solvents due to their negligible vapor pressure, which means no emission of volatile organic compounds. Due to these interesting properties, ionic liquids have been explored as promising solvents for the dissolution and fractionation of wood and cellulose for biofuel production, pulping, extraction of nanocellulose, and for processing all-wood and all-cellulose composites. This review describes, at first, the potential of ionic liquids and the impact of the cation/anion combination on their physiochemical properties and on their solvation power and selectivity to wood polymers. It also elaborates on how the dissolution conditions influence these parameters. It then discusses the different approaches, which are followed for the homogeneous and heterogeneous dissolution and fractionation of wood and cellulose using ionic liquids and categorize them based on the target application. It finally highlights the challenges of using ionic liquids for wood and cellulose dissolution and processing, including side reactions, viscosity, recyclability, and price.

High Yielding Acid-Catalysed Hydrolysis of Cellulosic Polysaccharides and Native Biomass into Low Molecular Weight Sugars in Mixed Ionic Liquid Systems

Ionic media comprising 1‐butyl‐3‐methylimidazolium chloride and the acidic deep eutectic solvent choline chloride/oxalic acid as co‐solvent‐catalyst, very efficiently convert various cellulosic substrates, including native cellulosic biomass, into water‐soluble carbohydrates. The optimum reaction systems yield a narrow range of low molecular weight carbohydrates directly from cellulose, lignocellulose, or algal saccharides, in high yields and selectivities up to 98 %. Cellulose possesses significant potential as a renewable platform from which to generate large volumes of green replacements to many petrochemical products. Within this goal, the production of low molecular weight saccharides from cellulosic substances is the key to success. Native cellulose and lignocellulosic feedstocks are less accessible for such transformations and depolymerisation of polysaccharides remains a primary challenge to be overcome. In this study, we identify the catalytic activity associated with selected deep eutectic solvents that favours the hydrolysis of polysaccharides and develop reaction conditions to improve the outcomes of desirable low molecular weight sugars. We successfully apply the chemistry to raw bulk, non‐pretreated cellulosic substances.

Modular Engineering of Biomass Degradation Pathways

Production of fuels and chemicals from renewable lignocellulosic feedstocks is a promising alternative to petroleum-derived compounds. Due to the complexity of lignocellulosic feedstocks, microbial conversion of all potential substrates will require substantial metabolic engineering. Non-model microbes offer desirable physiological traits, but also increase the difficulty of heterologous pathway engineering and optimization. The development of modular design principles that allow metabolic pathways to be used in a variety of novel microbes with minimal strain-specific optimization will enable the rapid construction of microbes for commercial production of biofuels and bioproducts. In this review, we discuss variability of lignocellulosic feedstocks, pathways for catabolism of lignocellulose-derived compounds, challenges to heterologous engineering of catabolic pathways, and opportunities to apply modular pathway design. Implementation of these approaches will simplify the process of modifying non-model microbes to convert diverse lignocellulosic feedstocks.

Green chemical engineering in China

In China, the rapid development greatly promotes the national economic power and living standard but also inevitably brings a series of environmental problems. In order to resolve these problems fundamentally, Chinese scientists have been undertaking research in the area of green chemical engineering (GCE) for many years and achieved great progresses. In this paper, we reviewed the research progresses related to GCE in China and screened four typical topics related to the Chinese resources characteristics and environmental requirements, i.e. ionic liquids and their applications, biomass utilization and bio-based materials/products, green solvent-mediated extraction technologies, and cold plasmas for coal conversion. Afterwards, the perspectives and development tendencies of GCE were proposed, and the challenges which will be faced while developing available industrial technologies in China were mentioned.

Catalytic preparation of levulinic acid from cellobiose via Brønsted-Lewis acidic ionic liquids functional catalysts

Brønsted-Lewis acidic ionic liquids (ILs) were applied to catalyze cellobiose to prepare levulinic acid (LA) in one pot under hydrothermal conditions. Under the optimum conditions, the highest LA yield of 67.51% was obtained when low [HO₃S-(CH₂)₃-mim]Cl-FeCl₃ (molar fraction of FeCl₃ x = 0.60) was used. This indicated the Brønsted-Lewis acidic ILs played an active role in the conversion of cellobiose to LA. The catalytic mechanism of ILs had been established, disclosing that the Brønsted-Lewis acidic ILs had the catalytic synergistic effect originating from its double acid sites. During the reaction process, the Lewis acid sites improved the isomerization of glucose to fructose, then the Brønsted and Lewis acid sites simultaneously enhanced the dehydration of fructose to produce hydroxymethylfurfural (HMF), which was propitious to the synthesize LA with high yield. In addition, LA could be easily extracted by methyl isobutyl ketone (MIBK), and the ILs could retain its basic activity after 5 cycles. The solid residues were characterized using SEM, FT-IR and TG-DTG spectroscopy. It was the conclusion that a large amount of humins were produced during the cellobiose conversion process. In this reaction, the ILs not only overcomes the problems of the conventional catalyst, but also completes the reaction-separation integration and the recycling of the catalyst. This paper provided an important theoretical basis for the application of ILs in the field of biomass.

Synergistic effect of modified activated carbon and ionic liquid in the conversion of microcrystalline cellulose to 5-Hydroxymethyl Furfural

This study highlights cellulose conversion for the production of 5-Hydroxymethyl Furfural using synergistic effect of modified activated carbon and ionic liquid under moderate reaction conditions. Modified Activated carbon after acid treatment (ACS, ACP, ACH) were used to examine their catalytic activity on hydrolysis of cellulose in [Bmim]Cl medium. Changes in physical-chemical properties were characterized using XRD, FE-SEM, EDX, FT-IR and BET surface area analyser techniques. Modified activated carbon is found competent in enhancing cellulose conversion to Total Reducing Sugars and 5-Hydroxymethyl Furfural. Further, the effect of six metal ions i.e Cr⁺³, Fe⁺³, Cu⁺², Zn⁺², K⁺ and Al⁺³ impregnated on sulfuric acid treated activated carbon (ACS) was explored. The catalytic performance improves with the impregnation of metals in the decreasing order: Cr⁺³> Fe⁺³> Cu⁺²> Zn⁺²> Al⁺³> K⁺. These modified catalysts with ionic liquid as solvent are found promising to generate eco-friendly system and cost effective cellulose conversion to value added products.

Chemocatalytic Conversion of Cellulose into Key Platform Chemicals

Chemocatalytic transformation of lignocellulosic biomass to value-added chemicals has attracted global interest in order to build up sustainable societies. Cellulose, the first most abundant constituent of lignocellulosic biomass, has received extensive attention for its comprehensive utilization of resource, such as its catalytic conversion into high value-added chemicals and fuels (e.g., HMF, DMF, and isosorbide). However, the low reactivity of cellulose has prevented its use in chemical industry due to stable chemical structure and poor solubility in common solvents over the cellulose. Recently, homogeneous or heterogeneous catalysis for the conversion of cellulose has been expected to overcome this issue, because various types of pretreatment and homogeneous or heterogeneous catalysts can be designed and applied in a wide range of reaction conditions. In this review, we show the present situation and perspective of homogeneous or heterogeneous catalysis for the direct conversion of cellulose into useful platform chemicals.

COSMO-RS-Based Screening of Antisolvents for the Separation of Sugars from Ionic Liquids: Experimental and Molecular Dynamic Simulations

The use of ionic liquids (ILs) in the biorefinery process has been increasing for the past few decades. In biorefinery, the separation process with respect to sugars needs to be evaluated for an efficient process design. Therefore, the present work aims to investigate the separation of sugars and ILs by means of a precipitation process using an antisolvent method. For this purpose, both theoretical and experimental studies were conducted. Initially, the conductor-like screening model for real solvents model was employed to screen the suitable antisolvents for the separation of sugars from the ILs. From the screening study, dichloromethane (DCM) and 1,2-dichloroethane were found to be the better antisolvents for the separation process. With the selected antisolvents, precipitation experiments were conducted for the mixtures involving four different sugars and three ILs at different experimental conditions. The process variables such as different antisolvents, sugars, ILs, antisolvent-IL molar ratios, and temperatures were examined in terms of their effect on sugar removal and IL recovery. DCM was found to be the most suitable antisolvent in this study with 90-99% of sugar removal and 80-98% of IL recovery. Further, molecular dynamics simulations were adopted to understand the structural properties of carbohydrates with ILs and antisolvents via interaction energies, hydrogen bonding, and coordination numbers. It was observed that the interaction energy between the sugars and IL plays a critical role in the removal of sugar. Higher the interaction energy between the sugars and IL, lower is the sugar removal.

Catalytic Transformation of Cellulose and Its Derivatives into Functionalized Organic Acids

Cellulose is a promising renewable and abundant resource for the production of high-value chemicals, in particular, organic oxygenates, because of its high oxygen/carbon ratio. The sustainable production of hydroxycarboxylic acids and dicarboxylic acids, such as gluconic/glucaric acid, lactic acid, 2,5-furandicarboxylic acid, adipic acid, and terephthalic acid, most of which are monomers of key polymers, have attracted much attention in recent years. The synthesis of these organic acids from cellulose generally involves several tandem reaction steps, and thus, multifunctional catalysts that can catalyze the selective activation of specific C-O or C-C bonds hold the key. This review highlights recent advances in the development of efficient catalytic systems and new strategies for the selective conversion of cellulose or its derived carbohydrates into functionalized organic acids. The reaction mechanism is discussed to offer deep insights into the regioselective cleavage of C-O or C-C bonds.

Towards a molecular understanding of cellulose dissolution in ionic liquids: anion/cation effect, synergistic mechanism and physicochemical aspects

Cellulose is one of the most abundant bio-renewable materials on the earth and its conversion to biofuels provides an appealing way to satisfy the increasing global energy demand. However, before carrying out the process of enzymolysis to glucose or polysaccharides, cellulose needs to be pretreated to overcome its recalcitrance. In recent years, a variety of ionic liquids (ILs) have been found to be effective solvents for cellulose, providing a new, feasible pretreatment strategy. A lot of experimental and computational studies have been carried out to investigate the dissolution mechanism. However, many details are not fully understood, which highlights the necessity to overview the current knowledge of cellulose dissolution and identify the research trend in the future. This perspective summarizes the mechanistic studies and microscopic insights of cellulose dissolution in ILs. Recent investigations of the synergistic effect of cations/anions and the distinctive structural changes of cellulose microfibril in ILs are also reviewed. Besides, understanding the factors controlling the dissolution process, such as the structure of anions/cations, viscosity of ILs, pretreatment temperature, heating rate, etc., has been discussed from a structural and physicochemical viewpoint. At the end, the existing problems are discussed and future prospects are given. We hope this article would be helpful for deeper understanding of the cellulose dissolution process in ILs and the rational design of more efficient and recyclable ILs.

Facile synthesis of hierarchical porous solid catalysts with acid–base bifunctional active sites for the conversion of cellulose to 5-hydroxymethylfurfural

Hierarchical porous catalysts with acid–base bifunctional active sites were successfully synthesized using a Pickering HIPE template that was stabilized by halloysite nanotubes.

Brønsted acidic ionic liquids for cellulose hydrolysis in an aqueous medium: structural effects on acidity and glucose yield

The conversion of cellulose into valuable chemicals has attracted much attention, due to the concern about depletion of fossil fuels. The hydrolysis of cellulose is a key step in this conversion, for which Brønsted acidic ionic liquids (BAILs) have been considered promising acid catalysts. In this study, using BAILs with various structures, their acidic catalytic activity for cellulose hydrolysis assisted by microwave irradiation was assessed using the Hammett acidity function (H₀) and theoretical calculations. The glucose yields exceeded 10% when the H₀ values of the BAIL aqueous solutions were below 1.5. The highest glucose yield was about 36% in 1-(1-octyl-3-imidazolio)propane-3-sulfonate (Oimps)/sulfuric acid (H₂SO₄) aqueous solution. A long alkyl side chain on the imidazolium cation, which increased the hydrophobicity of the BAILs, enhanced the glucose yield.

Using Brønsted acidic ionic liquids with various structures, their acidic catalytic activity for cellulose hydrolysis assisted by microwave irradiation was assessed using the Hammett acidity function (H₀) and theoretical calculations.

Homogenous graphene oxide-peptide nanofiber hybrid hydrogel as biomimetic polysaccharide hydrolase

Cellulose, an impressive potential sustainable fuel, is difficult to hydrolyze because of the protection of β-1,4-glycosidic bonds through the tight hydrogen bonding network. In this study, homogenous graphene oxide (GO)-peptide nanofiber hybrid hydrogels (GO-PNFs) were designed as a β-glycosyl hydrolase mimetic to achieve efficient degradation of cellobiose and cellopentaose. For comparison, free peptides, graphene oxide mixed with free peptides (GO-peptdies) and self-assembled peptide nanofibers (PNFs) were also studied for their activity as a hydrolase mimetics for degradation of cellobiose. Among these materials, GO-PNFs showed the highest hydrolysis activity. Transmission electron microscopy, atomic force microscopy, fluorescence analysis, circular dichroism spectroscopies, X-ray diffraction, Raman spectra and computational modeling were used to interpret the difference in activity mechanism in these artificially designed enzymes. These investigations suggested that high catalytic performance of GO-PNFs toward cellobiose and cellopentaose hydrolysis could be attributed to the formation of nanofiber structures of peptides, optimal molecular conformation and less steric hindrance to access the substrate. More importantly, GO not only served as a platform for attaching PNFs, but also created a hydrophobic microenvironment and facilitated proton transfer, an essential step in catalytic hydrolysis, thus enhancing catalytic activity. All these provided insights into the potential use of peptides and GO hybrid composite nanoenzymes in efficient cellulose hydrolysis.

Enhanced hydrolysis of cellulose hydrogels by morphological modification

Cellulose is one of the most abundant bio-renewable materials on earth, yet the potential of cellulosic bio-fuels is not fully exploited, primarily due to the high costs of conversion. Hydrogel particles of regenerated cellulose constitute a useful substrate for enzymatic hydrolysis, due to their porous and amorphous structure. This article describes the influence of several structural aspects of the cellulose hydrogel on its hydrolysis. The hydrogel density was shown to be directly proportional to the cellulose concentration in the initial solution, thus affecting its hydrolysis rate. Using high-resolution scanning electron microscopy, we show that the hydrogel particles in aqueous suspension exhibit a dense external surface layer and a more porous internal network. Elimination of the external surface layer accelerated the hydrolysis rate by up to sixfold and rendered the process nearly independent of cellulose concentration. These findings may be of practical relevance to saccharification processing costs, by reducing required solvent quantities and enzyme load.

Catalytic Transformation of Lignocellulose into Chemicals and Fuel Products in Ionic Liquids

Innovative valorization of naturally abundant and renewable lignocellulosic biomass is of great importance in the pursuit of a sustainable future and biobased economy. Ionic liquids (ILs) as an important kind of green solvents and functional fluids have attracted significant attention for the catalytic transformation of lignocellulosic feedstocks into a diverse range of products. Taking advantage of some unique properties of ILs with different functions, the catalytic transformation processes can be carried out more efficiently and potentially with lower environmental impacts. Also, a new product portfolio may be derived from catalytic systems with ILs as media. This review focuses on the catalytic chemical conversion of lignocellulose and its primary ingredients (i.e., cellulose, hemicellulose, and lignin) into value-added chemicals and fuel products using ILs as the reaction media. An outlook is provided at the end of this review to highlight the challenges and opportunities associated with this interesting and important area.

The enhancement of the hydrolysis of bamboo biomass in ionic liquid with chitosan-based solid acid catalysts immobilized with metal ions

Three kinds of sulfonated cross-linked chitosan (SCCR) immobilized with metal ions of Cu(2+), Fe(3+) and Zn(2+) individually were synthesized and firstly used as solid acid catalysts in the hydrolysis of bamboo biomass. FTIR spectra showed that metal ions had been introduced into SCCR and the N-metal ions coordinate bound was formed. The particle sizes of these catalysts were about 500-1000μm with a pore size of 50-160μm. All of the three kinds of catalysts performed well for bamboo hydrolysis with 1-butyl-3-methyl-imidazolium chloride used as solvent. The most effective one was sulfonated cross-linked chitosan immobilized with Fe(3+) (Fe(3+)-SCCR). TRS yields were up to 73.42% for hydrolysis of bamboo powder in [C4mim]Cl with Fe(3+)-SCCR at 120°C and 20RPM after 24h. These novel chitosan-based metal ions immobilized solid acid catalysts with ionic liquids as the solvent might be promising to facilitate cost-efficient conversion of biomass into biofuels and bioproducts.

Microcrystalline cellulose: Isolation, characterization and bio-composites application-A review

Considering its widespread usage in various fields, such as food, pharmaceutical, medical, cosmetic and polymer composites industries, microcrystalline cellulose (MCC) is becoming impellent due to increasing demand of alternatives to non-renewable and scarce fossil materials. Although it still suffers from some drawbacks, MCC has recently gained more interest owing to its renewability, non-toxicity, economic value, biodegradability, high mechanical properties, high surface area and biocompatibility. New sources, new isolation processes, and new treatments are currently under development to satisfy the increasing demand of producing new types of MCC-based materials on an industrial scale. Therefore, this review assembles the current knowledge on the isolation of MCC from different sources using various procedures, its characterization, and its application in bio-composites. Challenges and future opportunities of MCC-based composites are discussed as well as obstacles remaining for their extensive uses.