Harnessing Nature's Catalysts: Advances in Enzymatic Alkene Cleavage

Double bonds are prevalent in various substrates and renewable feedstocks, and their cleavage typically necessitates harsh reaction conditions involving high temperatures, organic solvents, and hazardous catalysts such as heavy metals or ozone. This review explores the sustainable enzymatic alternatives developed by nature for alkene cleavage. It provides a comprehensive overview of alkene-cleaving enzymes, detailing their mechanisms, substrate specificities, and applications. The enzymes discussed include those acting on aliphatic, cyclic, and activated aromatic systems. Emphasizing the significance of these biocatalysts in green chemistry and biocatalysis, this review highlights their potential to replace traditional chemical oxidants with safer, cost-effective, and environmentally friendly options. Future research directions include expanding enzyme substrate scopes, enhancing their operational stability and activity, and integrating them into scalable processes for broader application in the pharmaceutical, flavor, and fragrance industries.

Review of key issues and potential strategies in bio-degradation of polyolefins

Polyolefins are the most widely used plastic product and a major contributor to white pollution. Currently, studies on polyolefin degradation systems are mainly focused on microorganisms and some redox enzymes, and there is a serious black-box phenomenon. The use of polyolefin-degrading enzymes is limited because of the small number of enzymes; in addition, the catalytic efficiency of these enzymes is poor and their catalytic mechanism is unclear, which leads to the incomplete degradation of polyolefins to produce microplastics. In this review three questions are addressed: the generation and degradation of action targets that promote the degradation of polyolefins, the different modes by which enzymes bind substrates and their application scenarios, and possible multienzyme systems in a unified system. This review will be valuable for mining or modifying polyolefin degradation enzymes and constructing polyolefins degradation systems and may provide novel ideas and opportunities for polyolefin degradation.

Influence of Configurational Isomerism of Pyridine π Bridge in Donor-π Bridge-Acceptor Type Covalent Triazine Frameworks on The Photocatalytic Performance

Covalent triazine frameworks (CTFs) involving a donor-π bridge-acceptor (D-π-A) structure are considered one of the most promising photocatalytic materials, in which the π bridge is known to play an important role in influencing the photocatalytic performance. So far, much effort has been directed at the designing of the different π bridge structure to facilitate the photo-induced charge separation. However, the orientation of the π bridge units (configurational isomerism) has not been considered. In this paper, a pair of pyridine-bridged D-π-A type CTFs, named TFA-P1-CTF and TFA-P2-CTF, were designed to investigate how the orientation of the π bridge would influence their performance in the photocatalytic oxidation of olefins into carbonyl compounds. Interestingly, due to the superior charge separation capability, TFA-P2-CTF was found to be able to catalyze the reaction more efficiently than TFA-P1-CTF. Our study eventually provided a guide for the design of D-π-A type CTFs as high-performance photocatalytic materials via tuning the configurational isomerism of the π bridge unit for use in chemical transformations.

Natural Occurring Terpene Cyclic Anhydrides: Biosynthetic Origin and Biological Activities

Cyclic acid anhydride is a not very widespread structure in nature, but with a determining role in natural products possessing this functionality in their skeleton. To the best of our knowledge, no revision of terpenes containing cyclic anhydrides has been previously reported. The result was that more than 100 terpenic cyclic anhydrides and related compounds were found to be in need of being reported. This review has been systematically organized by terpene skeletons, from the smallest to largest, describing their sources and bioactivities. In addition, different biosynthetic pathways for their final oxidations, namely, routes A, B and C, leading to the formation of these heterocyclic natural products, have been proposed. We have also included the most plausible precursors of these natural products, which mostly happened to be present in the same natural source. Some molecules derived from terpene cyclic anhydrides, such as their natural imide derivatives, have also been described due to their significant biological activity. In this sense, special attention has been paid to cantharidin because of its historical relevance and its broad bioactivity. A plausible biosynthesis of cantharidin has been proposed for the first time. Finally, cyclic anhydride structures that were firstly assigned as anhydrides and later corrected have been also described.

Iodine-Promoted Sulfoximidation of Cinnamic Acids via Oxidative C═C Bond Cleavage

An iodine-promoted C═C bond cleavage with concomitant decarboxylation and cross-coupling between cinnamic acids and NH-sulfoximines has been developed. This reaction proceeds via selective C═C bond cleavage, followed by decarboxylation and oxidative sulfoximidation. This metal- and base-free protocol involves dioxygen as the source of oxygen, which is facilitated by tert-butyl hydroperoxide (TBHP) as the oxidant affording N-aroylated sulfoximines with good functional group tolerance and good yields.

Recent Advances in Photoinduced Oxidative Cleavage of Alkenes

Oxidative cleavage of alkenes leading to valuable carbonyl derivatives is a fundamental transformation in synthetic chemistry. In particular, ozonolysis is the mainstream method for the oxidative cleavage of alkenes that has been widely implemented in the synthesis of natural products and pharmaceutically relevant compounds. However, due to the toxicity and explosive nature of ozone, alternative approaches employing transition metals and enzymes in the presence of oxygen and/or strong oxidants have been developed. These protocols are often conducted under harsh reaction conditions that limit the substrate scope. Photochemical approaches can provide milder and more practical alternatives for this synthetically useful transformation. In this review, we outline recent visible-light-promoted oxidative cleavage reactions that involve photocatalytic activation of oxygen via electron transfer and energy transfer. Also, an emerging field featuring visible-light-promoted oxidative cleavage under anaerobic conditions is discussed. The methods highlighted in this review represent a transformative step toward more sustainable and efficient strategies for the oxidative cleavage of alkenes.

The Application of Porous Organic Polymers as Metal Free Photocatalysts in Organic Synthesis

Concerns about increasing greenhouse gas emissions and their effect on our environment highlight the urgent need for new sustainable technologies. Visible light photocatalysis allows the clean and selective generation of reactive intermediates under mild conditions. The more widespread adoption of the current generation of photocatalysts, particularly those using precious metals, is hampered by drawbacks such as their cost, toxicity, difficult separation, and limited recyclability. This is driving the search for alternatives, such as porous organic polymers (POPs). This new class of materials is made entirely from organic building blocks, can possess high surface area and stability, and has a controllable composition and functionality. This review focuses on the application of POPs as photocatalysts in organic synthesis. For each reaction type, a representative material is discussed, with special attention to the mechanism of the reaction. Additionally, an overview is given, comparing POPs with other classes of photocatalysts, and critical conclusions and future perspectives are provided on this important field.

A Proline-Based Artificial Enzyme That Favors Aldol Condensation Enables Facile Synthesis of Aliphatic Ketones via Tandem Catalysis

A proline-based artificial enzyme is prepared by grafting the l-proline moieties onto the surface of bovine serum albumin (BSA) protein through atom transfer radical polymerization (ATRP). The artificial enzyme, the BSA-PolyProline conjugate, prefers to catalyze the formation of unsaturated ketones rather than β-hydroxy ketones in the reaction between acetone and aldehydes, which is difficult to achieve in free-proline catalysis. The altered reaction selectivity is ascribed to the locally concentrated l-proline moieties surrounding the BSA molecule, indicating a microenvironmental effect-induced switching of the reaction mechanism. Taking advantage of this selectivity, we used this artificial enzyme in conjunction with a natural enzyme, old yellow enzyme 1 (OYE1), to demonstrate a simple synthesis of different aliphatic ketones from acetone and aldehydes via tandem catalysis.

Nature stays natural: two novel chemo-enzymatic one-pot cascades for the synthesis of fragrance and flavor aldehydes

Novel synthetic strategies for the production of high-value chemicals based on the 12 principles of green chemistry are highly desired. Herein, we present a proof of concept for two novel chemo-enzymatic one-pot cascades allowing for the production of valuable fragrance and flavor aldehydes. We utilized renewable phenylpropenes, such as eugenol from cloves or estragole from estragon, as starting materials. For the first strategy, Pd-catalyzed isomerization of the allylic double bond and subsequent enzyme-mediated (aromatic dioxygenase, ADO) alkene cleavage were performed to obtain the desired aldehydes. In the second route, the double bond was oxidized to the corresponding ketone via a copper-free Wacker oxidation protocol followed by enzymatic Baeyer-Villiger oxidation (phenylacetone monooxygenase from Thermobifida fusca), esterase-mediated (esterase from Pseudomonas fluorescens, PfeI) hydrolysis and subsequent oxidation of the primary alcohol (alcohol dehydrogenase from Pseudomonas putida, AlkJ) to the respective aldehyde products. Eight different phenylpropene derivatives were subjected to these reaction sequences, allowing for the synthesis of seven aldehydes in up to 55% yield after 4 reaction steps (86% for each step).

Iron-incorporated metal-organic frameworks for oxidative cleavage of trans-anethole to p-anisaldehyde

An iron-incorporated Zn-MOF catalyst Zn-bpydc·Fe was fabricated for the oxidative cleavage of trans-anethole to p-anisaldehyde under facile conditions, under 1 atm of O2. The Fe coordinated bipyridine serves as the catalytically active center inside the structural skeleton of Zn-MOFs. This work affords a new avenue for the mild oxidation of olefins.

Carbon-Carbon Bond Cleavage for Late-Stage Functionalization

Late-stage functionalization (LSF) introduces functional group or structural modification at the final stage of the synthesis of natural products, drugs, and complex compounds. It is anticipated that late-stage functionalization would improve drug discovery's effectiveness and efficiency and hasten the creation of various chemical libraries. Consequently, late-stage functionalization of natural products is a productive technique to produce natural product derivatives, which significantly impacts chemical biology and drug development. Carbon-carbon bonds make up the fundamental framework of organic molecules. Compared with the carbon-carbon bond construction, the carbon-carbon bond activation can directly enable molecular editing (deletion, insertion, or modification of atoms or groups of atoms) and provide a more efficient and accurate synthetic strategy. However, the efficient and selective activation of unstrained carbon-carbon bonds is still one of the most challenging projects in organic synthesis. This review encompasses the strategies employed in recent years for carbon-carbon bond cleavage by explicitly focusing on their applicability in late-stage functionalization. This review expands the current discourse on carbon-carbon bond cleavage in late-stage functionalization reactions by providing a comprehensive overview of the selective cleavage of various types of carbon-carbon bonds. This includes C-C(sp), C-C(sp2), and C-C(sp3) single bonds; carbon-carbon double bonds; and carbon-carbon triple bonds, with a focus on catalysis by transition metals or organocatalysts. Additionally, specific topics, such as ring-opening processes involving carbon-carbon bond cleavage in three-, four-, five-, and six-membered rings, are discussed, and exemplar applications of these techniques are showcased in the context of complex bioactive molecules or drug discovery. This review aims to shed light on recent advancements in the field and propose potential avenues for future research in the realm of late-stage carbon-carbon bond functionalization.

Caulobacter segnis Dioxygenase CsO2: A Practical Biocatalyst for Stilbenoid Ozonolysis

Ozonolysis is a useful as well as dangerous reaction for performing alkene cleavage. On the other hand, enzymes are considered a more sustainable and safer alternative. Among them, Caulobacter segnis dioxygenase (CsO2) known so far for its ability to catalyze the coenzyme-free oxidation of vinylguaiacol into vanillin, was selected and its substrate scope evaluated towards diverse natural and synthetic stilbenoids. Under optimized conditions, CsO2 catalyzed the oxidative cleavage of the C=C double bonds of various trans-stilbenes, providing that a hydroxyl moiety was necessary in para-position of the phenyl group (e. g., resveratrol and its derivatives) for the reaction to take place, which was confirmed by modelling studies. The reactions occurred rapidly (0.5-3 h) with high conversions (95-99 %) and without formation of by-products. The resveratrol biotransformation was carried out on 50-mL scale thus confirming the feasibility of the biocatalytic system as a preparative method.

Donor-Acceptor Covalent Organic Frameworks as a Heterogeneous Photoredox Catalyst for Scissoring Alkenes to Carbonyl Constituents

The conversion of alkenes to carbonyl constituents via the cleavage of the C═C bond is unique due to its biological and pharmacological significance. Though a number of oxidative C═C cleavage protocols have been demonstrated for terminal and electron-rich alkene systems, none of them were optimized for electron-deficient and conjugated alkenes. In this work, a covalent organic framework containing triphenylamine and triazine units was revealed to cleave the C═C bond of alkenes under very mild conditions involving visible light irradiation due to its photoredox property. The alkenes can be conveniently broken across the double bond to their constituent carbonyl derivatives on light irradiation in the presence of air and the covalent organic framework photocatalyst. This protocol is applicable for a wide range of alkenes in an aqueous acetonitrile medium with high functional group tolerance and regioselectivity. Though the electron-deficient alkenes required tetramethylethylene diamine as a sacrificial donor, the electron-rich alkenes do not demand any additives.

Oxidations of Alcohols, Aldehydes, and Diols Using NaBr and Selectfluor

We present protocols for the oxidation of alcohols and aldehydes and for the oxidative cyclization of diols which use a combination of Selectfluor and NaBr. For most substrates, the optimal solvent system is a 1:1 mixture of CH3CN/H2O, but, in select cases, biphasic 1:1 mixtures of EtOAc/H2O or CH2Cl2/H2O are superior. This procedure is operationally simple, uses inexpensive and readily available reagents, and tolerates a variety of functional groups. Mechanistic studies suggest that the active oxidant is hypobromous acid, generated by the almost instantaneous oxidation of Br- by Selectfluor in an aqueous milieu.

Enzymatic reactions towards aldehydes: An overview

Many aldehydes are volatile compounds with distinct and characteristic olfactory properties. The aldehydic functional group is reactive and, as such, an invaluable chemical multi-tool to make all sorts of products. Owing to the reactivity, the selective synthesis of aldehydic is a challenging task. Nature has evolved a number of enzymatic reactions to produce aldehydes, and this review provides an overview of aldehyde-forming reactions in biological systems and beyond. Whereas some of these biotransformations are still in their infancy in terms of synthetic applicability, others are developed to an extent that allows their implementation as industrial biocatalysts.

Oxygen transfer reactivity mediated by nickel perfluoroalkyl complexes using molecular oxygen as a terminal oxidant

Nickel perfluoroethyl and perfluoropropyl complexes supported by naphthyridine-type ligands show drastically different aerobic reactivity from their trifluoromethyl analogs resulting in facile oxygen transfer to perfluoroalkyl groups or oxygenation of external organic substrates (phosphines, sulfides, alkenes and alcohols) using O₂ or air as a terminal oxidant. Such mild aerobic oxygenation occurs through the formation of spectroscopically detected transient high-valent Ni^III and structurally characterized mixed-valent Ni^II-Ni^IV intermediates and radical intermediates, resembling O₂ activation reported for some Pd dialkyl complexes. This reactivity is in contrast with the aerobic oxidation of naphthyridine-based Ni(CF₃)₂ complexes resulting in the formation of a stable Ni^III product, which is attributed to the effect of greater steric congestion imposed by longer perfluoroalkyl chains.

Chemo-enzymatic synthesis and biological activity evaluation of propenylbenzene derivatives

Propenylbenzenes, including isosafrole, anethole, isoeugenol, and their derivatives, are natural compounds found in essential oils from various plants. Compounds of this group are important and valuable, and are used in the flavour and fragrance industries as well as the pharmaceutical and cosmetic industries. The aim of this study was to develop an efficient process for synthesising oxygenated derivatives of these compounds and evaluate their potential biological activities. In this paper, we propose a two-step chemo-enzymatic method. The first step involves the synthesis of corresponding diols 1b-5b from propenylbenzenes 1a-5avia lipase catalysed epoxidation followed by epoxide hydrolysis. The second step involves the microbial oxidation of a diasteroisomeric mixture of diols 1b-5b to yield the corresponding hydroxy ketones 1c-4c, which in this study was performed on a preparative scale using Dietzia sp. DSM44016, Rhodococcus erythropolis DSM44534, R. erythropolis PCM2150, and Rhodococcus ruber PCM2166. Application of scaled-up processes allowed to obtain hydroxy ketones 1-4c with the following yield range 36-62.5%. The propenylbenzene derivatives thus obtained and the starting compounds were tested for various biological activities, including antimicrobial, antioxidant, haemolytic, and anticancer activities, and their impact on membrane fluidity. Fungistatic activity assay against selected strains of Candida albicans results in MIC₅₀ value varied from 37 to 124 μg/mL for compounds 1a, 3a-c, 4a,b, and 5a,b. The highest antiradical activity was shown by propenylbenzenes 1-5a with a double bond in their structure with EC₅₀ value ranged from 19 to 31 μg/mL. Haemolytic activity assay showed no cytotoxicity of the tested compounds on human RBCs whereas, compounds 2b-4b and 2c-4c affected the fluidity of the RBCs membrane. The tested compounds depending on their concentration showed different antiproliferative activity against HepG2, Caco-2, and MG63. The results indicate the potential utility of these compounds as fungistatics, antioxidants, and proliferation inhibitors of selected cell lines.

Catalytic Chemical Recycling of Post-Consumer Polyethylene

Among commercial plastics, polyolefins are the most widely produced worldwide but have limited recyclability. Here, we report a chemical recycling route for the conversion of post-consumer high-density polyethylene (HDPE) into telechelic macromonomers suitable for circular reprocessing. Unsaturation was introduced into HDPE by catalytic dehydrogenation using an Ir-POCOP catalyst without an alkene acceptor. Cross-metathesis with 2-hydroxyethyl acrylate followed by hydrogenation transformed the partially unsaturated HDPE into telechelic macromonomers. The direct repolymerization of the macromonomers gave a brittle material due to the low overall weight-average molecular weight. Aminolysis of telechelic macromonomers with a small amount of diethanolamine increased the overall functionality. The resulting macromonomers were repolymerized through transesterification to generate a polymer with comparable mechanical properties to the starting post-consumer HDPE waste. Depolymerization of the repolymerized material catalyzed by an organic base regenerated the telechelic macromonomers, thereby allowing waste polyethylene materials to enter a chemical recycling pathway.

Structure- and computational-aided engineering of an oxidase to produce isoeugenol from a lignin-derived compound

Various 4-alkylphenols can be easily obtained through reductive catalytic fractionation of lignocellulosic biomass. Selective dehydrogenation of 4-n-propylguaiacol results in the formation of isoeugenol, a valuable flavor and fragrance molecule and versatile precursor compound. Here we present the engineering of a bacterial eugenol oxidase to catalyze this reaction. Five mutations, identified from computational predictions, are first introduced to render the enzyme more thermostable. Other mutations are then added and analyzed to enhance chemoselectivity and activity. Structural insight demonstrates that the slow catalytic activity of an otherwise promising enzyme variant is due the formation of a slowly-decaying covalent substrate-flavin cofactor adduct that can be remedied by targeted residue changes. The final engineered variant comprises eight mutations, is thermostable, displays good activity and acts as a highly chemoselective 4-n-propylguaiacol oxidase. We lastly use our engineered biocatalyst in an illustrative preparative reaction at gram-scale. Our findings show that a natural enzyme can be redesigned into a tailored biocatalyst capable of valorizing lignin-based monophenols.

Photoinduced Oxygen Transfer Using Nitroarenes for the Anaerobic Cleavage of Alkenes

Herein we report the anaerobic cleavage of alkenes into carbonyl compounds using nitroarenes as oxygen transfer reagents under visible light. This approach serves as a safe and practical alternative to mainstream oxidative cleavage protocols, such as ozonolysis and the Lemieux-Johnson reaction. A wide range of alkenes possessing oxidatively sensitive functionalities underwent anaerobic cleavage to generate carbonyl derivatives with high efficiency and regioselectivity. Mechanistic studies support that the transformation occurs via direct photoexcitation of the nitroarene followed by a nonstereospecific radical cycloaddition event with alkenes. This leads to 1,3,2- and 1,4,2-dioxazolidine intermediates that fragment to give the carbonyl products. A combination of radical clock experiments and in situ photoNMR spectroscopy revealed the identities of the key radical species and the putative aryl dioxazolidine intermediates, respectively.

Photochemical Organocatalytic Aerobic Cleavage of C═C Bonds Enabled by Charge-Transfer Complex Formation

A novel visible-light-driven organocatalytic protocol to access aerobic oxidative cleavage of olefins, promoted by sodium benzene sulfinate, is described herein. An array of alkenes smoothly delivered the corresponding aldehydes and ketones under transition-metal-free conditions. Notably, α-halo-substituted styrenes proceeded with photoinduced oxidation to finally afford α-halo-acetophenones with halogen migration. Crucial to this oxidation was the formation of charge-transfer complexes between sodium benzene sulfinate with molecular O₂ to ultimately deliver the carbonyl products.

Regioselective Disulfide-Catalyzed Photocatalytic Oxidative Cleavage of 1-Arylbutadienes to Cinnamaldehydes

This work discloses a simple, efficient, and environmentally benevolent disulfide-catalyzed photocatalytic regioselective oxidative cleavage of 1-arylbutadienes to cinnamaldehydes. This methodology illustrates mild reaction conditions, ambient temperature, excellent regioselectivity, and compatibility with wide range of functional groups (38 examples). The method gains significance, as few reports with limited substrate scope are available for such excellent photocatalytic oxidative cleavage of conjugated dienes.

Iodine-Mediated C═C Double Bond Cleavage toward Pyrido[2,1-b]quinazolinones

A transition-metal-free C═C double bond cleavage reaction employing molecular iodine is described. In the presence of K₂CO₃ as the base, I₂-mediated C═C bond cleavage followed by intramolecular annulation of N-(2-vinylaryl)pyridin-2-amine substrates produces pyrido[2,1-b]quinazolinones and related heterocyclic compounds. This reaction can be completed on a gram scale and has been successfully applied to the synthesis of compounds with important biological properties, including efflux pump inhibitory and antiallergic activities.

Visible light-promoted aerobic oxidative cleavage and cyclization of olefins to access 3-hydroxy-isoindolinones

An environmentally friendly synthetic approach is described from 2-vinylbenzamide to 3-hydroxy-isoindolinones through visible light-promoted transformations via iron/disulfide catalysis and molecular oxygen oxidation.

Visible-Light-Driven Oxidative Cleavage of Alkenes Using Water-Soluble CdSe Quantum Dots

The oxidative cleavage of C=C bonds is an important chemical reaction, which is a popular reaction in the photocatalytic field. However, high catalyst-loading and low turnover number (TON) are general shortcomings in reported visible-light-driven reactions. Herein, the direct oxidative cleavage of C=C bonds through water-soluble CdSe quantum dots (QDs) is described under visible-light irradiation at room temperature with high TON (up to 3.7×10⁴ ). Under the same conditions, water-soluble CdSe QDs could also oxidize sulfides to sulfoxides with 51-84 % yields and TONs up to 3.4×10⁴ . The key features of this photocatalytic protocol include high TONs, wide substrates scope, low catalyst loadings, simple and mild reaction conditions, and molecular O₂ as the oxidant.

Photo-induced oxidative cleavage of C-C double bonds for the synthesis of biaryl methanone via CeCl3 catalysis

A Ce-catalyzed strategy is developed to produce biaryl methanones via photooxidative cleavage of C-C double bonds at room temperature. This reaction is performed under air and demonstrates high activity as well as functional group tolerance. A synergistic Ce/ROH catalytic mechanism is also proposed based on the experimental observations. This protocol should be the first successful Ce-catalyzed photooxidation reaction of olefins with air as the oxidant, which would provide inspiration for the development of novel Ce-catalyzed photochemical synthesis processes.

Oxidative Cleavage of Alkenes by O2 with a Non-Heme Manganese Catalyst

The oxidative cleavage of C=C double bonds with molecular oxygen to produce carbonyl compounds is an important transformation in chemical and pharmaceutical synthesis. In nature, enzymes containing the first-row transition metals, particularly heme and non-heme iron-dependent enzymes, readily activate O₂ and oxidatively cleave C=C bonds with exquisite precision under ambient conditions. The reaction remains challenging for synthetic chemists, however. There are only a small number of known synthetic metal catalysts that allow for the oxidative cleavage of alkenes at an atmospheric pressure of O₂, with very few known to catalyze the cleavage of nonactivated alkenes. In this work, we describe a light-driven, Mn-catalyzed protocol for the selective oxidation of alkenes to carbonyls under 1 atm of O₂. For the first time, aromatic as well as various nonactivated aliphatic alkenes could be oxidized to afford ketones and aldehydes under clean, mild conditions with a first row, biorelevant metal catalyst. Moreover, the protocol shows a very good functional group tolerance. Mechanistic investigation suggests that Mn–oxo species, including an asymmetric, mixed-valent bis(μ-oxo)-Mn(III,IV) complex, are involved in the oxidation, and the solvent methanol participates in O₂ activation that leads to the formation of the oxo species.

Fe-S Catalyst Generated In Situ from Fe(III)- and S3•--Promoted Aerobic Oxidation of Terminal Alkenes

An iron-sulfur complex formed by the simple mixture of FeCl₃ with S₃^•- generated in situ from K₂S is developed and applied to selective aerobic oxidation of terminal alkenes. The reaction was carried out under an atmosphere of O₂ (balloon) and could proceed on a gram scale, expanding the application of S₃^•- in organic synthesis. This study also encourages us to explore the application of an Fe-S catalyst in organic reactions.

Monokaryotic Pleurotus sapidus Strains with Intraspecific Variability of an Alkene Cleaving DyP-Type Peroxidase Activity as a Result of Gene Mutation and Differential Gene Expression

The basidiomycete Pleurotus sapidus produced a dye-decolorizing peroxidase (PsaPOX) with alkene cleavage activity, implying potential as a biocatalyst for the fragrance and flavor industry. To increase the activity, a daughter-generation of 101 basidiospore-derived monokaryons (MK) was used. After a pre-selection according to the growth rate, the activity analysis revealed a stable intraspecific variability of the strains regarding peroxidase and alkene cleavage activity of PsaPOX. Ten monokaryons reached activities up to 2.6-fold higher than the dikaryon, with MK16 showing the highest activity. Analysis of the PsaPOX gene identified three different enzyme variants. These were co-responsible for the observed differences in activities between strains as verified by heterologous expression in Komagataella phaffii. The mutation S371H in enzyme variant PsaPOX_high caused an activity increase alongside a higher protein stability, while the eleven mutations in variant PsaPOX_low resulted in an activity decrease, which was partially based on a shift of the pH optimum from 3.5 to 3.0. Transcriptional analysis revealed the increased expression of PsaPOX in MK16 as reason for the higher PsaPOX activity in comparison to other strains producing the same PsaPOX variant. Thus, different expression profiles, as well as enzyme variants, were identified as crucial factors for the intraspecific variability of the PsaPOX activity in the monokaryons.

Chemo-enzymatic oxidative cleavage of isosafrole for the synthesis of piperonal

Piperonal is a key feedstock for the fine chemical industry. A novel process for its production from isosafrole is described, based on lipase-mediated perhydrolysis in flow, followed by batch alkaline treatment and by MnO2 oxidation in flow.

Thiol-initiated photocatalytic oxidative cleavage of the CC bond in olefins and its extension to direct production of acetals from olefins

Oxidative cleavage of a broad scope of olefins is realized over ZnIn₂S₄ under visible light, using air as oxidant and thiol as initiator. Coupled with the condensation between aldehydes/ketones and alcohols, this strategy can be used to yield acetals directly from olefins.

Highly efficient oxidative cleavage of olefins with O2 under catalyst-, initiator- and additive-free conditions

Without employing any external catalyst, initiator and additives, an efficient and eco-friendly protocol has been developed for the synthesis of carbonyl compound via 1,4-dioxane- promoted oxidation of olefins with atmospheric O₂ as the sole oxidant.

A DyP-Type Peroxidase of Pleurotus sapidus with Alkene Cleaving Activity

Alkene cleavage is a possibility to generate aldehydes with olfactory properties for the fragrance and flavor industry. A dye-decolorizing peroxidase (DyP) of the basidiomycete Pleurotus sapidus (PsaPOX) cleaved the aryl alkene trans-anethole. The PsaPOX was semi-purified from the mycelium via FPLC, and the corresponding gene was identified. The amino acid sequence as well as the predicted tertiary structure showed typical characteristics of DyPs as well as a non-canonical Mn²⁺-oxidation site on its surface. The gene was expressed in Komagataella pfaffii GS115 yielding activities up to 142 U/L using 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) as substrate. PsaPOX exhibited optima at pH 3.5 and 40 °C and showed highest peroxidase activity in the presence of 100 µM H₂O₂ and 25 mM Mn²⁺. PsaPOX lacked the typical activity of DyPs towards anthraquinone dyes, but oxidized Mn²⁺ to Mn³⁺. In addition, bleaching of β-carotene and annatto was observed. Biotransformation experiments verified the alkene cleavage activity towards the aryl alkenes (E)-methyl isoeugenol, α-methylstyrene, and trans-anethole, which was increased almost twofold in the presence of Mn²⁺. The resultant aldehydes are olfactants used in the fragrance and flavor industry. PsaPOX is the first described DyP with alkene cleavage activity towards aryl alkenes and showed potential as biocatalyst for flavor production.

Two novel nornemoralisin-type diterpenoids from Aphanamixis polystachya (Wall.) R. Parker

Two novel heptanornemoralisin-type diterpenoids nornemoralisins A (1) and B (2), together with two known compounds nemoralisin (3) and nemoralisin A (4), were isolated from the stem bark and leaves of Aphanamixis polystachya (Wall.) R. Parker. Their structures were established through comprehensive analyses of NMR spectroscopic data and high resolution mass spectrometric (HR-ESI-MS) data. The absolute configurations of carbon stereocenters were elucidated by circular dichroism (CD) analyses. The four compounds were tested for their potential cytotoxic effects against ACHN, HeLa, SMMC-7721, and MCF-7 cell lines. Nornemoralisins A (1) and B (2) exhibited significant cytotoxicity on ACHN with an IC₅₀ value of 13.9 ± 0.8 and 10.3 ± 0.4 μM, respectively, and other compounds failed to reveal obvious cytotoxicity on the tested cell lines, compared to positive control vinblastine (IC₅₀, 28.0 ± 0.9 μM).

Iron-Catalyzed Nitrene Transfer Reaction of 4-Hydroxystilbenes with Aryl Azides: Synthesis of Imines via C═C Bond Cleavage

C═C bond breaking to access the C═N bond remains an underdeveloped area. A new protocol for C═C bond cleavage of alkenes under nonoxidative conditions to produce imines via an iron-catalyzed nitrene transfer reaction of 4-hydroxystilbenes with aryl azides is reported. The success of various sequential one-pot reactions reveals that the good compatibility of this method makes it very attractive for synthetic applications. On the basis of experimental observations, a plausible reaction mechanism is also proposed.

Anti-prion Butenolides and Diphenylpropanones from the Australian Ascidian Polycarpa procera

A library of 500 Australian marine invertebrate extracts was screened for anti-prion activity using a yeast-based assay, and this resulted in an extract from the ascidian Polycarpa procera showing potent activity. Purification of this extract led to the isolation of six new butenolide metabolites, the procerolides 1-4 and two related diphenylpropanones, the procerones 5 and 6, as the bioactive components. The structures of 1-6 were elucidated from the analysis of 1D/2D NMR and MS data, and their absolute configurations determined from comparison of experimental and computed ECD data. Compounds 1-6 were tested for anti-prion activity in a yeast-based assay, and 1 and 5 displayed potent bioactivity (EC₅₀ of 23 and 29 μM, respectively) comparable to the potently active anti-prion compound guanabenz. The procerolides and procerones are the first anti-prion compounds to be reported from ascidians, indicating that ascidians may be an untapped source of new lead anti-prion compounds.

Biocatalytic selective functionalisation of alkenes via single-step and one-pot multi-step reactions

Alkenes are excellent starting materials for organic synthesis due to the versatile reactivity of C[double bond, length as m-dash]C bonds and the easy availability of many unfunctionalised alkenes. Direct regio- and/or enantioselective conversion of alkenes into functionalised (chiral) compounds has enormous potential for industrial applications, and thus has attracted the attention of researchers for extensive development using chemo-catalysis over the past few years. On the other hand, many enzymes have also been employed for conversion of alkenes in a highly selective and much greener manner to offer valuable products. Herein, we review recent advances in seven well-known types of biocatalytic conversion of alkenes. Remarkably, recent mechanism-guided directed evolution and enzyme cascades have enabled the development of seven novel types of single-step and one-pot multi-step functionalisation of alkenes, some of which are even unattainable via chemo-catalysis. These new reactions are particularly highlighted in this feature article. Overall, we present an ever-expanding enzyme toolbox for various alkene functionalisations inspiring further research in this fast-developing theme.

Iron(ii) tetrafluoroborate complexes of new tetradentate C-scorpionates as catalysts for the oxidative cleavage of trans-stilbene with H2O2

Iron(ii) complexes of two new tetradentate C-scorpionate ligands are characterized. Both catalyze stilbene cleavage using either H₂O₂ or a O₂/photocatalyst oxidant.