Metal–Organic Frameworks for Photo/Electrocatalysis

An electrically conducting 3D coronene-based metal-organic framework

A novel cubic mesoporous metal-organic framework (MOF), consisting of hexahydroxy-cata-hexabenzocoronene (c-HBC) and FeIII ions is presented. The highly crystalline and porous MOF features broad optical absorption over the whole visible and near infrared spectral regions. An electrical conductivity of 10-4 S cm-1 was measured on a pressed pellet.

Uncoordinated amino groups of MIL-101 anchoring cobalt porphyrins for highly selective CO2 electroreduction

Electrocatalytic carbon dioxide reduction reaction (CO2RR) presents a sustainable route to address energy crisis and environmental issues, where the rational design of catalysts remains crucial. Metal-organic frameworks (MOFs) with high CO2 capture capacities have immense potential as CO2RR electrocatalysts but suffer from poor activity. Herein we report a redox-active cobalt protoporphyrin grafted MIL-101(Cr)-NH2 for CO2 electroreduction. Material characterizations reveal that porphyrin molecules are covalently attached to uncoordinated amino groups of the parent MOF without compromising its well-defined porous structure. Furthermore, in situ spectroscopic techniques suggest inherited CO2 concentrate ability and more abundant adsorbed carbonate species on the modified MOF. As a result, a maximum CO Faradaic efficiency (FECO) up to 97.1% and a turnover frequency of 0.63 s-1 are achieved, together with FECO above 90% within a wide potential window of 300 mV. This work sheds new light on the coupling of MOFs with molecular catalysts to enhance catalytic performances.

Selectivity Control in the Direct CO Esterification over Pd@UiO-66: The Pd Location Matters

The selectivity control of Pd nanoparticles (NPs) in the direct CO esterification with methyl nitrite toward dimethyl oxalate (DMO) or dimethyl carbonate (DMC) remains a grand challenge. Herein, Pd NPs are incorporated into isoreticular metal-organic frameworks (MOFs), namely UiO-66-X (X=-H, -NO2 , -NH2 ), affording Pd@UiO-66-X, which unexpectedly exhibit high selectivity (up to 99 %) to DMC and regulated activity in the direct CO esterification. In sharp contrast, the Pd NPs supported on the MOF, yielding Pd/UiO-66, displays high selectivity (89 %) to DMO as always reported with Pd NPs. Both experimental and DFT calculation results prove that the Pd location relative to UiO-66 gives rise to discriminated microenvironment of different amounts of interface between Zr-oxo clusters and Pd NPs in Pd@UiO-66 and Pd/UiO-66, resulting in their distinctly different selectivity. This is an unprecedented finding on the production of DMC by Pd NPs, which was previously achieved by Pd(II) only, in the direct CO esterification.

Metal-organic framework boosts heterogeneous electron donor-acceptor catalysis

Metal-organic framework (MOF) is a class of porous materials providing an excellent platform for engineering heterogeneous catalysis. We herein report the design of MOF Zr-PZDB consisting of Zr6-clusters and PZDB (PZDB = 4,4'-(phenazine-5,10-diyl)dibenzoate) linkers, which served as the heterogeneous donor catalyst for enhanced electron donor-acceptor (EDA) photoactivation. The high local concentration of dihydrophenazine active centers in Zr-PZDB can promote the EDA interaction, therefore resulting in superior catalytic performance over homogeneous counterparts. The crowded environment of Zr-PZDB can protect the dihydrophenazine active center from being attacked by radical species. Zr-PZDB efficiently catalyzes the Minisci-type reaction of N-heterocycles with a series of C-H coupling partners, including ethers, alcohols, non-activated alkanes, amides, and aldehydes. Zr-PZDB also enables the coupling reaction of aryl sulfonium salts with heterocycles. The catalytic activity of Zr-PZDB extends to late-stage functionalization of bioactive and drug molecules, including Nikethamide, Admiral, and Myristyl Nicotinate. Systematical spectroscopy study and analysis support the EDA interaction between Zr-PZDB and pyridinium salt or aryl sulfonium salt, respectively. Photoactivation of the MOF-based EDA adduct triggers an intra-complex single electron transfer from donor to acceptor, giving open-shell radical species for cross-coupling reactions. This research represents the first example of MOF-enabled heterogeneous EDA photoactivation.

Self-supporting, hierarchically hollow structured NiFe-PBA electrocatalyst for efficient alkaline seawater oxidation

Seawater electrolysis, taking advantage of the huge seawater resource, holds great promise for sustainable hydrogen generation. Compared to conventional water electrolysis, seawater electrolysis is more challenging because of the more complex and corrosive electrolyte and competitive side reactions, which necessitates the development of highly efficient and stable electrocatalysts. In this study, a self-supporting, highly porous NiFe-PBA (Prussian-blue-analogue) electrocatalyst with a hierarchically hollow nanostructure is introduced, which exhibits impressive catalytic performance towards the oxygen evolution in alkaline seawater electrolytes. In NiFe-PBA, the synergistic interaction between Ni and Fe improves intrinsic conductivity for efficient electron transfer, enhances chemical stability in seawater, and boosts overall electrocatalytic activity. The direct use of self-supporting NiFe-PBA as an electrocatalyst avoids the energy-intensive and tedious pyrolysis procedure during the preparation process while making use of the tailored morphological, structural, and compositional benefits of PBA-based materials. By combining the NiFe-PBA catalyst with the NiMoN cathode, the constructed two-electrode electrolyzer achieved a high current density of 500 mA cm-2 at a low cell voltage of 1.782 V for overall electrolysis of alkaline seawater, demonstrating excellent durability for 100 hours. Our findings have important implications for the hydrogen economy and sustainable development through the development of robust and efficient PBA-based electrocatalysts for seawater electrolysis.

Progress on Single-Atom Photocatalysts for H2 Generation: Material Design, Catalytic Mechanism, and Perspectives

Solar energy utilization is of great significance to current challenges of the energy crisis and environmental pollution, which benefit the development of the global community to achieve carbon neutrality goals. Hydrogen energy is also treated as a good candidate for future energy supply since its combustion not only supplies high-density energy but also shows no pollution gas. In particular, photocatalytic water splitting has attracted increasing research as a promising method for H2 production. Recently, single-atom (SA) photocatalysts have been proposed as a potential solution to improve catalytic efficiency and lower the costs of photocatalytic water splitting for H2 generation. Owing to the maximized atom utilization rate, abundant surface active sites, and tunable coordination environment, SA photocatalysts have achieved significant progress. This review reviews developments of advanced SA photocatalysts for H2 generation regarding the different support materials. The recent progress of titanium dioxide, metal-organic frameworks, two-dimensional carbon materials, and red phosphorus supported SA photocatalysts are carefully discussed. In particular, the material designs, reaction mechanisms, modulation strategies, and perspectives are highlighted for realizing improved solar-to-energy efficiency and H2 generation rate. This work will supply significant references for future design and synthesis of advanced SA photocatalysts.

Integration of Metal-Organic Frameworks and Metals: Synergy for Electrocatalysis

Electrocatalysis is a highly promising technology widely used in clean energy conversion. There is a continuing need to develop advanced electrocatalysts to catalyze the critical electrochemical reactions. Integrating metal active species, including various metal nanostructures (NSs) and atomically dispersed metal sites (ADMSs), into metal-organic frameworks (MOFs) leads to the formation of promising heterogeneous electrocatalysts that take advantage of both components. Among them, MOFs can provide support and protection for the active sites on guest metals, and the resulting host-guest interactions can synergistically enhance the electrocatalytic performance. In this review, three key concerns on MOF-metal heterogeneous electrocatalysts regarding the catalytic sites, conductivity, and catalytic stability are first presented. Then, rational integration strategies of MOFs and metals, including the integration of metal NSs via surface anchoring, space confining, and MOF coating, as well as the integration of ADMSs either with the metal nodes/linkers or within the pores of MOFs, along with their recent progress on synergistic cooperation for specific electrochemical reactions are summarized. Finally, current challenges and possible solutions in applying these increasingly concerned electrocatalysts are also provided.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Green Energy by Hydrogen Production from Water Splitting, Water Oxidation Catalysis and Acceptorless Dehydrogenative Coupling

In this review, we want to explain how the burning of fossil fuels is pushing us towards green energy. Actually, for a long time, we have believed that everything is profitable, that resources are unlimited and there are no consequences. However, the reality is often disappointing. The use of non-renewable resources, the excessive waste production and the abandonment of the task of recycling has created a fragile thread that, once broken, may never restore itself. Metaphors aside, we are talking about our planet, the Earth, and its unique ability to host life, including ourselves. Our world has its balance; when the wind erodes a mountain, a beach appears, or when a fire devastates an area, eventually new life emerges from the ashes. However, humans have been distorting this balance for decades. Our evolving way of living has increased the number of resources that each person consumes, whether food, shelter, or energy; we have overworked everything to exhaustion. Scientists worldwide have already said actively and passively that we are facing one of the biggest problems ever: climate change. This is unsustainable and we must try to revert it, or, if we are too late, slow it down as much as possible. To make this happen, there are many possible methods. In this review, we investigate catalysts for using water as an energy source, or, instead of water, alcohols. On the other hand, the recycling of gases such as CO2 and N2O is also addressed, but we also observe non-catalytic means of generating energy through solar cell production.

Perovskite LaNiO3/Ag3PO4 heterojunction photocatalyst for the degradation of dyes

Pristine lanthanum nickelate (LaNiO₃), silver phosphate (Ag₃PO₄) and perovskite lanthanum nickelate silver phosphate composites (LaNiO₃/Ag₃PO₄) were prepared using the facile hydrothermal method. Three composites were synthesized by varying the percentage of LaNiO₃ in Ag₃PO₄. The physical properties of as-prepared samples were studied by powder X-ray diffraction (pXRD), Fourier-transform infrared (FT-IR), Scanning electron microscopy (SEM) and Energy-dispersive X-ray (EDX). Among all synthesized photocatalysts, 5%LaNiO₃/Ag₃PO₄ composite has been proved to be an excellent visible light photocatalyst for the degradation of dyes i.e., rhodamine B (RhB) and methyl orange (MO). The photocatalytic activity and stability of Ag₃PO₄ were also enhanced by introducing LaNiO₃ in Ag₃PO₄ heterojunction formation. Complete photodegradation of 50 mg/L of RhB and MO solutions using 25 mg of 5%LaNiO₃/Ag₃PO₄ photocatalyst was observed in just 20 min. Photodegradation of RhB and MO using 5%LaNiO₃/Ag₃PO₄ catalyst follows first-order kinetics with rate constants of 0.213 and 0.1804 min^-1, respectively. Perovskite LaNiO₃/Ag₃PO₄ photocatalyst showed the highest stability up to five cycles. The photodegradation mechanism suggests that the holes ( h ⁺) and superoxide anion radicals O 2   • - plays a main role in the dye degradation of RhB and MO.

Synthesis, Characterization, and Photocatalytic Activity of Mixed-Ligand Cerium(III) and Bismuth(III) Complexes

Two ternary complexes (Ce(sal)3(phen)2) (1) and (Bi(sal)3(phen)2) (2) with salicylic acid (sal) and 1,10-phenanthroline (phen) have been synthesized and characterized by analytical techniques such as UV-visible spectroscopy, FT-IR spectroscopy, PXRD, and SEM. The UV-visible study indicated the shifting of peak positions of metal complexes compared with the individual ligands whereas FT-IR analysis demonstrated that the metals were successfully coordinated with different functional groups of the ligands. The photocatalytic properties of prepared complexes were evaluated against Congo red dye as a model pollutant under ultraviolet and sunlight irradiation. The degradation efficiency of complex (2) was greater than that of complex (1). The results indicated that the investigated complexes can be employed as potential candidates for photocatalytic breakdown of synthetic dyes and can be safely recommended for environmental remediation.

Achievements and Perspectives in Metal–Organic Framework-Based Materials for Photocatalytic Nitrogen Reduction

Metal–organic frameworks (MOFs) are coordination polymers with high porosity that are constructed from molecular engineering. Constructing MOFs as photocatalysts for the reduction of nitrogen to ammonia is a newly emerging but fast-growing field, owing to MOFs’ large pore volumes, adjustable pore sizes, controllable structures, wide light harvesting ranges, and high densities of exposed catalytic sites. They are also growing in popularity because of the pristine MOFs that can easily be transformed into advanced composites and derivatives, with enhanced catalytic performance. In this review, we firstly summarized and compared the ammonia detection methods and the synthetic methods of MOF-based materials. Then we highlighted the recent achievements in state-of-the-art MOF-based materials for photocatalytic nitrogen fixation. Finally, the summary and perspectives of MOF-based materials for photocatalytic nitrogen fixation were presented. This review aims to provide up-to-date developments in MOF-based materials for nitrogen fixation that are beneficial to researchers who are interested or involved in this field.

Solvent-controlled synthesis of Ti-based porphyrinic metal–organic frameworks for the selective photocatalytic oxidation of amines

The photocatalytic activity of metal-organic frameworks (MOFs) can be managed by the milieu of synthesis. Herein, N,N'-dimethylacetamide (DMA) and N,N'-diethylformamide (DEF) were employed as solvents for the synthesis of two Ti-based porphyrinic MOFs, namely Ti-PMOF-DMA and Ti-PMOF-DEF, from tetrabutyl orthotitanate and 4,4',4'',4'''-(porphine-5,10,15,20-tetrayl)tetrakis(benzoic acid). Notably, both DMA and DEF were adsorbed onto the Ti-oxo clusters of the two MOFs to shape their properties. Ti-PMOF-DMA was observed with better optoelectronic response and charge transfer than Ti-PMOF-DEF. Moreover, Ti-PMOF-DMA owned a larger pore volume than Ti-PMOF-DEF, imparting more accessible sites to benzyl amines. Ti-PMOF-DMA exhibited better activity in selective photocatalytic aerobic oxidation of benzylamine than Ti-PMOF-DEF. Irradiated by red light-emitting diodes, outstanding results for selective conversion of  benzyl amines to imines over Ti-PMOF-DMA were attained. Superoxide radical anion, generated by the electron transfer from porphyrin via Ti-oxo clusters to dioxygen, turned out to be the primary reactive oxygen species. There was generality towards aerobic oxidation of amines to imines and considerable stability for Ti-PMOF-DMA. This work provides a new perspective on the altering MOFs to enhance photocatalytic organic transformations.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Ag Nanoparticle-Modified Polyoxometalate-Based Metal-Organic Framework for Enhanced CO2 Photoreduction

The photoreduction deposition method is employed to fabricate a family of silver nanoparticle (Ag NP)-modified polyoxometalate-based metal-organic framework (NENU-5) photocatalysts, named Ag/NENU-5. The title photocatalysts, Ag/NENU-5, can be used for the photocatalytic reduction of CO₂ and are observed to efficiently reduce CO₂ into CO, in which the highest reduction rate is 22.28 μmol g^-1 h^-1, 3 times greater than that of NENU-5. Photocatalytic reduction performances of CO₂ have been extremely improved after the incorporation of Ag NPs as the cocatalyst. The enhancement of the photocatalytic reduction of CO₂ has been attributed to the synergistic effects of Ag NPs and NENU-5, inhibiting the charge recombination during the photocatalytic process and increasing the reaction active sites. Furthermore, the influence of Ag NPs on the photocatalytic activity has also been investigated. The experimental results clearly reveal that the size of Ag NPs could exert a main effect on the photocatalytic activity, and the reasonable size of Ag NPs is able to enhance the photocatalytic reduction activity toward CO₂ significantly.

Amino-Functionalized Titanium Based Metal-Organic Framework for Photocatalytic Hydrogen Production

Photocatalytic hydrogen production using stable metal-organic frameworks (MOFs), especially the titanium-based MOFs (Ti-MOFs) as photocatalysts is one of the most promising solutions to solve the energy crisis. However, due to the high reactivity and harsh synthetic conditions, only a limited number of Ti-MOFs have been reported so far. Herein, we synthesized a new amino-functionalized Ti-MOFs, named NH₂-ZSTU-2 (ZSTU stands for Zhejiang Sci-Tech University), for photocatalytic hydrogen production under visible light irradiation. The NH₂-ZSTU-2 was synthesized by a facile solvothermal method, composed of 2,4,6-tri(4-carboxyphenylphenyl)-aniline (NH₂-BTB) triangular linker and infinite Ti-oxo chains. The structure and photoelectrochemical properties of NH₂-ZSTU-2 were fully studied by powder X-ray diffraction, scanning electron microscope, nitro sorption isotherms, solid-state diffuse reflectance absorption spectra, and Mott–Schottky measurements, etc., which conclude that NH₂-ZSTU-2 was favorable for photocatalytic hydrogen production. Benefitting from those structural features, NH₂-ZSTU-2 showed steady hydrogen production rate under visible light irradiation with average photocatalytic H₂ yields of 431.45 μmol·g⁻¹·h⁻¹ with triethanolamine and Pt as sacrificial agent and cocatalyst, respectively, which is almost 2.5 times higher than that of its counterpart ZSTU-2. The stability and proposed photocatalysis mechanism were also discussed. This work paves the way to design Ti-MOFs for photocatalysis.

Red room temperature phosphorescence of lead halide based coordination polymer showing efficient angle-dependent polarized emission and photoelectric performance

The development of organic-inorganic hybrid materials with long-lived room temperature phosphorescence (RTP) has attracted tremendous attention owing to their promising applications in the optoelectronic and anti-counterfeiting fields. In this work, by the selection of lead halide and electron-poor heteroaromatic molecule 1,10-phenanthroline (phen), a coordination polymer [Pb(phen)Cl₂] has been synthesized under hydrothermal conditions. This complex shows an alternating arrangement of a long-range order of phen π-conjugated systems and lead halide inorganic chains as revealed by X-ray single-crystal structural analysis. This structural character and special chemical components endow this hybrid material with a rare example of red room temperature phosphorescence. Its electronic structure and electronic transition behavior were further examined by theoretical calculations. Meanwhile, the film of the complex features remarkable angle-dependent polarized emission and photoelectric performance.

Ultra-stable two-dimensional metal-organic frameworks for photocatalytic H2 production

Two-dimensional (2D) metal-organic frameworks (MOFs) are some of the most promising photocatalysts owing to their high numbers of exposed active sites and excellent charge mobility. However, the synthesis of highly stable 2D MOF photocatalysts involves challenges, and examples have been rarely reported. Herein, a new kind of material, 2D indium-based porphyrin MOF cubic nanosheets (2D In-TCPP NS) with an average thickness of ∼3.97 nm, is synthesized via a surfactant-assisted approach, and it shows good chemical stability in the pH range of 2-11 in aqueous solution. In photocatalytic H₂-generation experiments, 2D In-TCPP NS exhibits activity that is enhanced by over one order of magnitude compared with the 3D bulk In-TCPP MOF, arising from its highly enhanced electron-hole separation abilities. Moreover, after 40 h of continuous photocatalysis testing, 2D In-TCPP NS shows nearly no activity decrease, which suggests its great potential for practical commercial use.

2D MOF nanosheets as an artificial light-harvesting system with enhanced photoelectric switching performance

Herein, we report the synthesis, structure and photophysical properties of a novel well-defined layered metal-organic framework (MOF) [Cd(ppda)(mbib)] by the selection of two flexible ligands 1,4-phenylenediacetic acid (ppda) and 1,3-bis(imidazol-1-ylmethyl)benzene...

Rational synthesis of isomorphic rare earth metal–organic framework materials for simultaneous adsorption and photocatalytic degradation of organic dyes in water

Two isomorphic rare earth metal–organic frameworks (MOFs) were synthesized by a solvothermal method. These MOFs have good removal effects on cationic and neutral dyes through simultaneous adsorption and photocatalysis.

One step synthesis of a bimetallic (Ni and Co) metal–organic framework for the efficient electrocatalytic oxidation of water and hydrazine

A series of metal–organic frameworks (MOFs) with varying Ni : Co ratios are synthesized by an easy one-step solvothermal method using trimesic acid as an organic linker.

Double-Walled Zn36@Zn104 Multicomponent Senary Metal-Organic Polyhedral Framework and Its Isoreticular Evolution

Metal-organic polyhedral frameworks are attractive in gas storage and separation due to large voids with windows that can serve as traps for guest molecules. Introducing multivariant/multicomponent functionalities in them are ways of improving performances for certain targets. The high compatibility of organic linkers can generate multivariant MOFs, but by far, the diversity of secondary building units (SBUs) in a single metal-organic framework is still limited (no more than two in most cases). Here we report a new double-walled Zn₃₆@Zn₁₀₄ metal-organic polyhedral framework (HHU-8) with five types of topologically distinct SBUs and its isoreticular evolution to the Zn₃₆@Zn₁₃₆ counterpart (HHU-8s). Both MOFs are the first to be constructed with such high numbers of topologically distinct SBUs as well as topologically distinct nodes, and their formation and evolution provide new insight into SBU's controllability.

Metal-Triazolate-Framework-Derived FeN4 Cl1 Single-Atom Catalysts with Hierarchical Porosity for the Oxygen Reduction Reaction

The construction of single-atom catalysts (SACs) with high single atom densities, favorable electronic structures and fast mass transfer is highly desired. We have utilized metal-triazolate (MET) frameworks, a subclass of metal-organic frameworks (MOFs) with high N content, as precursors since they can enhance the density and regulate the electronic structure of single-atom sites, as well as generate abundant mesopores simultaneously. Fe single atoms dispersed in a hierarchically porous N-doped carbon matrix with high metal content (2.78 wt %) and a FeN₄ Cl₁ configuration (FeN₄ Cl₁ /NC), as well as mesopores with a pore:volume ratio of 0.92, were obtained via the pyrolysis of a Zn/Fe-bimetallic MET modified with 4,5-dichloroimidazole. FeN₄ Cl₁ /NC exhibits excellent oxygen reduction reaction (ORR) activity in both alkaline and acidic electrolytes. Density functional theory calculations confirm that Cl can optimize the adsorption free energy of Fe sites to *OH, thereby promoting the ORR process. The catalyst demonstrates great potential in zinc-air batteries. This strategy selects, designs, and adjusts MOFs as precursors for high-performance SACs.