Control of the morphology and the size of complex coacervate microcapsules during scale-up

Critical Review of Food Colloidal Delivery System for Bioactive Compounds: Physical Characterization and Application

Bioactive compounds (BACs) have attracted much attention due to their potential health benefits. However, such substances have problems such as difficulty dissolving in water, poor stability, and low intestinal absorption, leading to serious limitations in practical applications. Nowadays, food colloidal delivery carriers have become a highly promising solution due to their safety, controllability, and efficiency. The use of natural macromolecules to construct delivery carriers can not only regulate the solubility, stability, and intestinal absorption of BACs but also effectively enhance the nutritional added value of functional foods, improve sensory properties, and extend shelf life. Moreover, smart-responsive colloidal delivery carriers can control the release characteristics of BACs, thus improving their absorption rate in the human body. This review describes the characteristics of several typical food colloid delivery carriers, focuses on their physical properties from static structure to dynamic release, summarizes their applications in delivery systems, and provides an outlook on the future development of food colloid delivery carriers. The different compositions and structures of food colloids tend to affect their stability and release behaviors, and the different surface properties and rheological characteristics of the carriers predestine their different application scenarios. The control of in vivo release properties and the effect on food media should be emphasized in the future exploration of safer and more controllable carrier systems.

Encapsulation and delivery systems of cinnamon essential oil for food preservation applications

Food safety threats and deterioration due to the invasion of microorganisms has led to economic losses and food-borne diseases in the food industry; so, development of natural food preservatives is urgently needed when considering the safety of chemically synthesized preservatives. Because of its outstanding antioxidant and antibacterial properties, cinnamon essential oil (CEO) is considered a promising natural preservative. However, CEO's low solubility and easy degradability limits its application in food products. Therefore, some encapsulation and delivery systems have been developed to improve CEO efficiency in food preservation applications. This work discusses the chemical and techno-functional properties of CEO, including its key components and antioxidant/antibacterial properties, and summarizes recent developments on encapsulation and delivery systems for CEO in food preservation applications. Since CEO is currently added to most biopolymeric films/coatings (BFCs) for food preservation, most studies have shown that encapsulation systems can improve the food preservation performance of BFCs containing CEOs. It has been confirmed that various delivery systems could improve the stability and controlled-release properties of CEO, thereby enhancing its ability to extend the shelf life of foods. These encapsulation techniques include spray drying, emulsion systems, complex coacervation (nanoprecipitation), ionic gelation, liposomes, inclusion complexation (cyclodextrins, silica), and electrospinning.

Preparation of β-ionone microcapsules by gelatin/pectin complex coacervation

β-ionone has a unique violet odor and good biological activity, which is an essential fragrance component and potential anticancer drug. In this paper, β-ionone was encapsulated using complex coacervation of gelatin and pectin, followed by cross-linking with glutaraldehyde. The pH value, wall material concentration, core-wall ratio, homogenization conditions, and curing agent content were investigated in the single-factor experiments. For example, the encapsulation efficiency increased with the homogenization speed, which reached a relatively high value at 13000 r/min for 5 min. The gelatin/pectin ratio (3:1, w/w) and pH value (4.23) significantly affected the size, shape, and encapsulation efficiency of the microcapsule. The fluorescence microscope and SEM were used to characterize the morphology of the microcapsules, in which the microcapsule has a stable morphology, uniform size, and spherical multinuclear structure. FTIR measurements confirmed the electrostatic interactions between gelatin and pectin during complex coacervation. Thermogravimetric analysis (TGA) revealed that the microcapsules could maintain good thermal stability over 260 °C. The release rate of β-ionone microcapsule was only 20.6 % after 30 days at the low temperature of 4 °C. These findings provide an effective carrier to deliver flavors like β-ionone and could be useful in the fields of daily chemicals and textiles.

Complex coacervation and freeze drying using whey protein concentrate, soy protein isolate and arabic gum to improve the oxidative stability of chia oil

BACKGROUND

Chia oil (CO) is popular for being the richest vegetable source of α-linolenic acid (60-66%). However, this content of polyunsaturated fatty acids (PUFA) limits the incorporation of bulk CO in food products due to its high probability of oxidation. This justifies the study of alternative wall materials for microencapsulation. No reports regarding the use of dairy protein/vegetable protein/polysaccharide blends as wall material for the microencapsulation of CO have been published. Therefore, this work analyzed the behavior of a whey protein concentrate (WPC)/soy protein isolate (SPI)/arabic gum (AG) blend as wall material. The complex coacervation (CC) process was studied: pH, 4.0; total solid content, 30% w/v; WPC/SPI/AG ratio, 8:1:1 w/w/w; stirring speed, 600 rpm; time, 30 min; room temperature.

RESULTS

The oxidative stability index (OSI) of CO (3.25 ± 0.16 h) was significantly increased after microencapsulation (around four times higher). Furthermore, the well-known matrix-forming ability of AG and WPC helped increase the OSI of microencapsulated oils. Meanwhile, SPI contributed to the increase of the encapsulation efficiency due to its high viscosity. Enhanced properties were observed with CC: encapsulation efficiency (up to 79.88%), OSIs (from 11.25 to 12.52 h) and thermal stability of microcapsules given by the denaturation peak temperatures of WPC (from 77.12 to 86.00 °C). No significant differences were observed in the fatty acid composition of bulk and microencapsulated oils.

CONCLUSION

Microcapsules developed from complex coacervates based on the ternary blend represent promising omega-3-rich carriers for being incorporated into functional foods.

Core-Shell Microcapsules from Unpurified Legume Flours

Plant-based ingredients are key building blocks for future sustainable advanced materials. Functionality is typically higher for highly purified plant-based ingredients, but this is at the expense of their sustainability value. Here, a method is introduced for creating a soft functional material, with structural elements ranging from the nanometer to the millimeter scale, directly from legume flours. Globulins from soy and pea flours are extracted in their native state at acidic pH and mixed with gum arabic, resulting in liquid-liquid phase separation into a dilute phase and a viscoelastic complex coacervate. Interfacial tensions of the coacervates, determined via AFM-based probing of capillary condensation, are found to be very low (γ = 48.5 and 32.3 μN/m for, respectively, soy and pea), thus promoting the deposition of a shell of coacervate material around oil droplets. Despite the complex nature of the starting material, the dependence of interfacial tensions on salt concentrations follows a scaling law previously shown to hold for model complex coacervates. Curing of the coacervate material into a strong and purely elastic hydrogel is shown to be possible via simple heating, both in bulk and as a shell around oil droplets, thus providing proof of principle for the fabrication of precise core-shell microcapsules directly from legume flours.

Encapsulation and sedimentation of nanomaterials through complex coacervation

HYPOTHESIS

Nanoparticles removal from seawage water is a health and environmental challenge, due to the increasing use of these materials of excellent colloidal stability. Herein we hypothesize to reach this objective through complex coacervation, a straightforward, low-cost process, normally accomplished with non-toxic and biodegradable macromolecules. Highly dense polymer-rich colloidal droplets (the coacervates) obtained from a reversible charge-driven phase separation, entrap suspended nanomaterials, allowing their settling and potential recovery.

EXPERIMENTS

In this work we apply this process to highly stable aqueous colloidal dispersions of different surface charge, size, type and state (solid or liquid). We systematically investigate the effects of the biopolymers excess and the nanomaterials concentration and charge on the encapsulation and sedimentation efficiency and rate. This strategy is also applied to real laboratory water-based wastes.

FINDINGS

Long-lasting colloidal suspensions are succesfully destabilized through coacervate formation, which ensures high nanomaterials encapsulation efficiencies (~85%), payloads and highly tranparent supernatants (%T ~90%), within two hours. Lower polymer excess induces faster clearance and less sediments, while preserving effective nanomaterials removal. Preliminary experiments also validate the method for the clearance of real water residuals, making complex coacervation a promising scalable, low-cost and ecofriendly alternative to concentrate, separate or recover suspended micro/nanomaterials from aqueous sludges.

Complex coacervation assisted by a two-fluid nozzle for microencapsulation of ginger oil: Effect of atomization parameters

This study investigates the influence of the atomization parameters on complex coacervation by atomization, and is following a preceding study that presented the technique and investigated the effects of formulation. Complex coacervated capsules were produced by atomization, using emulsions with 1 and 6%(w/w) of gelatin and ginger oil atomized over a 1%(w/w) solution of gum Arabic, at constant polymer ratio of 1:2 (gelatin:gum Arabic) at pH 3.5. The air velocity at the nozzle varied from 72 to 168 m/s and the emulsion velocity at the nozzle varied from 0.4 to 0.6 m/s, maintaining the air to liquid velocity ratio at 170, 220 and 270. The mean diameter of the microcapsules produced varied from 52 to 75 μm and no crosslinking agents were used. The influence of atomization numbers Weber (We) and Ohnesorge (Oh), shear rate and shear stress on the encapsulation performance was carried out and a proposed model was able to predict the final size of the microcapsules produced at We ≥ 180 and Oh = 0.063. Encapsulation efficiency varied from 9 to 95%, and encapsulation yield varied from 50 to 99%. Finally, optimum conditions based on size prediction and microencapsulation parameters were proposed.

Encapsulation Using Plant Proteins: Thermodynamics and Kinetics of Wetting for Simple Zein Coacervates

Traditionally, complex coacervates of oppositely charged biopolymers have been used to form coatings around oil droplets for encapsulation of oil-soluble payloads. However, many proteins can form coacervates by themselves under certain conditions. Here, we revisit the well-known simple coacervates of prolamins such as zein in mixed solvents to explore whether they can be used for plant-based encapsulation systems. We show that, for zein in mixed water/propylene glycol (PG) solvents, we can encapsulate limonene droplets but only under specific conditions. We illustrate that this limitation is due to the very different physical properties of the simple zein coacervates as compared to those of the more extensively studied complex coacervates. Droplets of simple coacervates of zein can carry a significant net charge, whereas complex coacervates are usually close to being charge-balanced. In particular, we demonstrate that the spreading of zein coacervates at the interface of the droplets is thermodynamically favorable due to their extremely low interfacial tensions in both the dispersed (∼0.24 mN/m) and oil phases (∼0.68 mN/m), but the kinetics of coacervate droplet deposition and the interactions among coacervate droplets that oppose coacervate droplet coalescence are highly pH-dependent, leading to a sharp pH optimum (around pH 8) for capsule formation.

Recent progress in preparation and agricultural application of microcapsules

Recent advances in life science technology have prompted the need to develop microcapsule delivery systems that can encapsulate many different functional or active materials such as drugs, peptides, and live cells, etc. The encapsulation technology is now commonly used in medicine, agriculture, food, and other many fields. The application of biodegradable microcapsule systems can not only effectively prevent the degradation of core materials in the body or the biological environment, but also improve the bioavailability, control the release and prolong the halftime or storage of core active materials. Various wall materials, preparation methods, encapsulation processes, and release mechanisms are covered in this review, as well as several main factors including pH values, temperatures, particle sizes, and additives, which can strongly influence the encapsulation efficiency, the strength, and release of microcapsules. The improvement of coating materials, preparation techniques, and challenges are also highlighted, as well as application prospects.

Delivery Systems for Low Molecular Weight Payloads: Core/Shell Capsules with Composite Coacervate/Polyurea Membranes

Composite polyurea/coacervate core/shell capsules are formed by coupling associative biopolymer phase separation with interfacial polymerization. They combine the excellent chemical stability of synthetic polymer barriers with the strong adhesive properties of protein-based complex coacervates, inspired by biological underwater glues. To encapsulate volatile oil droplets, a primary coacervate hydrogel capsule is formed by a protein and weak polyanion and is reinforced with a polyurea membrane synthesized in situ at the interface between the coacervate and the oil core. The polyurea layer provides an excellent permeability barrier against diffusion of small volatile molecules while the coacervate portion of the shell enhances adhesion on the targeted substrate.

A review of the preparation and application of flavour and essential oils microcapsules based on complex coacervation technology

This paper briefly introduces the preparation and application of flavour and essential oils microcapsules based on complex coacervation technology. The conventional encapsulating agents of oppositely charged proteins and polysaccharides that are used for microencapsulation of flavours and essential oils are reviewed along with the recent advances in complex coacervation methods. Proteins extracted from animal-derived products (gelatin, whey proteins, silk fibroin) and from vegetables (soy proteins, pea proteins), and polysaccharides such as gum Arabic, pectin, chitosan, agar, alginate, carrageenan and sodium carboxymethyl cellulose are described in depth. In recent decades, flavour and essential oils microcapsules have found numerous potential practical applications in food, textiles, agriculturals and pharmaceuticals. In this paper, the different coating materials and their application are discussed in detail. Consequently, the information obtained allows criteria to be established for selecting a method for the preparation of microcapsules according to their advantages, limitations and behaviours as carriers of flavours and essential oils.

Three-phase interactions and interfacial transport phenomena in coacervate/oil/water systems

Complex coacervation is an associative liquid/liquid phase separation resulting in the formation of two liquid phases: a polymer-rich coacervate phase and a dilute continuous solvent phase. In the presence of a third liquid phase in the form of disperse oil droplets, the coacervate phase tends to wet the oil/water interface. This affinity has long been known and used for the formation of core/shell capsules. However, while encapsulation by simple or complex coacervation has been used empirically for decades, there is a lack of a thorough understanding of the three-phase wetting phenomena that control the formation of encapsulated, compound droplets and the role of the viscoelasticity of the biopolymers involved. In this contribution, we review and discuss the interplay of wetting phenomena and fluid viscoelasticity in coacervate/oil/water systems from the perspective of colloid chemistry and fluid dynamics, focusing on aspects of rheology, interfacial tension measurements at the coacervate/solvent interface, and on the formation and fragmentation of three-phase compound drops.

Controlled pesticide release from biodegradable polymers

Polymers have been widely used in agriculture for applications including controlled release of pesticides and other active ingredients. The ability to predict their delivery helps avoid environmental hazards. Macromolecular matrices used as carriers in controlled release of agricultural active agents, especially pesticides, are reviewed. The review focuses on the advantages and mechanisms of controlled release. It includes biodegradable polymers in agriculture, their manufacturing methods, and their degradation mechanisms and kinetics. The article also presents a critical account of recent release studies and considers upcoming challenges.