Mesiodistal tooth crown dimensions of the primary dentition: A worldwide survey

Are deciduous upper molars and lower canines useful for sex estimation?

OBJECTIVE

This paper investigates whether deciduous upper molars and lower canines have sexual dimorphic features, exploring these teeth' dimensions and the presence of Zuckerkandl's tubercle and Carabelli's cusp on the first and second upper molars.

DESIGN

We analyzed 64 pairs of dental plaster casts from 34 females and 30 males aged between 3 and 12 years. We measured the first and second deciduous upper molars and the lower deciduous canines (maximum mesiodistal and buccolingual length), and we registered the presence of the Zuckerkandl's tubercle and the Carabelli's cusp on the first and second upper molars, respectively.

RESULTS

Regarding the differentiation between sexes using Carabelli's cusp and Zuckerkandl's tubercle, the classification was not independent of Carabelli's cusp presence only for tooth 65 (p = 0.035). In all other teeth, whether for Carabelli's cusp or Zuckerkandl's tubercle, their presence was similar for both sexes. There were statistically significant differences between sexes (p < 0.05) for the buccolingual measurements of both upper second molars, the first right upper molar, and the right canine. The developed model allowed for a 64.1% accuracy in sex estimation.

CONCLUSIONS

The study suggests that while Carabelli's cusp and Zuckerkandl's tubercle in upper deciduous molars don't consistently differ between sexes, tooth size, particularly the buccolingual measurements of certain teeth, including upper deciduous molars and lower canines, may provide a more reliable criterion for sex estimation. The developed model depicted moderate accuracy, underscoring the need for a multifactorial approach when estimating sex from skeletal remains. It suggests that while dental features can contribute to sex estimation, they should be used in conjunction with other skeletal or molecular markers to improve accuracy.

Estimation of sex assigned at birth using dental crown and cervical measurements in a modern global sample

Despite developing prior to the appearance of secondary sexual characteristics of the skeleton, the permanent dentition exhibits sexual dimorphism. Therefore, teeth can serve as a means to estimate sex assigned at birth even in young individuals. This project takes a large global sample of maximum dimensions of the crown as well as measurements of the crown at the cervix to explore sexual dimorphism. Dimorphism is noted in teeth throughout the dental arcade, particularly in the canines. We provide sectioning points as well as the probability of correct classification (ranging from 50.9% to 81.3%) for each measurement to aid the practitioner in sex estimation from the dentition. This research provides a method to estimate sex without arbitrary population specifications. We argue for a global approach that incorporates more population variation to remove the need to estimate "ancestry," (which in actuality is translated to a social race category) and therefore does not force sexual dimorphism-related variation into these mutable and ambiguous categories. Further, this paper demonstrates the utility of the dentition as an additional indicator to aid with the estimation of sex assigned at birth in forensic anthropology. The goal of this research is to better understand the expression of sexual dimorphism across the skeleton in a global context.

Digital measurement of deciduous tooth dimensions in China: A cross-sectional survey

OBJECTIVE

Crown dimensions data of deciduous teeth hold anthropological, forensic, and archaeological value. However, such information remains scarce for the Chinese population. This multi-center study aimed to collect a large sample of deciduous crown data from Chinese children using three-dimensional measurement methods and to analyze their dimensions.

DESIGN

A total of 1592 children's deciduous dentition samples were included, and the sample size was distributed according to Northeast, North, East, Northwest, Southwest and South China. Digital dental models were reconstructed from plaster dental models. Independent sample t test, paired t test, principal component analysis (PCA), and factor analysis (FA) were used to analyze the tooth crown dimensions.

RESULT

18,318 deciduous teeth from 1592 children were included. Males exhibited slightly larger values than females. The range of sexual dimorphism percentages for each measurement was as follows: mesiodistal diameter (0.40-2.08), buccolingual diameter (0.13-2.24), and maxillogingival diameter (0.48-3.37). The FA results showed that the main trend of crown dimensions changes was the simultaneous increase or decrease in mesiodistal diameter, buccolingual diameter and maxillogingival diameter in three directions.

CONCLUSION

This is the first large-scale survey of deciduous tooth crown dimensions in China, which supplements the data of deciduous tooth measurement and provides a reference for clinical application.

Use of dimensions in posterior dentition for sex estimation in forensic contexts: A systematic review and meta-analysis

OBJECTIVE

This study assessed the validity of dimensions in posterior dentition for sex estimation in forensic contexts.

DESIGN

A systematic review was established following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). After assessing the risk of bias and methodological quality with the QUADAS-2 system, the data were subjected to statistical tests for a meta-analysis of diagnostic accuracy and I2 to verify the heterogeneity.

RESULTS

The search resulted in 15 studies that underwent qualitative testing, all were selected for quantitative analysis. The papers included: the mesiodistal of the upper first molar, lower first molar, and upper second molar, and the buccolingual of the upper first molar and upper second molar. The results showed that sensitivity and specificity rates were lower with the mesiodistal diameter, with rates of 0.577 for the lower first molar, 0.674 for the upper first molar, and 0.698 for the upper second molar, while the rates were higher with the buccolingual diameter, with 0.724 for the upper first molar, and 0.743 for the upper second molar. The power to estimate sex is greater for males than for females. High heterogeneity was detected among the studies of almost all dimensions, except sensibility for the lower first molar and specificity for the upper second molar.

CONCLUSIONS

None of the dimensions reached an accuracy of ≥80%, however, so they are not a reliable method for sex estimation in forensic practice.

Dental size variation in admixed Latin Americans: Effects of age, sex and genomic ancestry

Dental size variation in modern humans has been assessed from regional to worldwide scales, especially under microevolutionary and forensic contexts. Despite this, populations of mixed continental ancestry such as contemporary Latin Americans remain unexplored. In the present study we investigated a large Latin American sample from Colombia (N = 804) and obtained buccolingual and mesiodistal diameters and three indices for maxillary and mandibular teeth (except third molars). We evaluated the correlation between 28 dental measurements (and three indices) with age, sex and genomic ancestry (estimated using genome-wide SNP data). In addition, we explored correlation patterns between dental measurements and the biological affinities, based on these measurements, between two Latin American samples (Colombians and Mexicans) and three putative parental populations: Central and South Native Americans, western Europeans and western Africans through PCA and DFA. Our results indicate that Latin Americans have high dental size diversity, overlapping the variation exhibited by the parental populations. Several dental dimensions and indices have significant correlations with sex and age. Western Europeans presented closer biological affinities with Colombians, and the European genomic ancestry exhibited the highest correlations with tooth size. Correlations between tooth measurements reveal distinct dental modules, as well as a higher integration of postcanine dentition. The effects on dental size of age, sex and genomic ancestry is of relevance for forensic, biohistorical and microevolutionary studies in Latin Americans.

Sexual dimorphism in deciduous tooth crown size: Variability within and between groups

OBJECTIVES

Sexual dimorphism in deciduous tooth crown size is often used to identify sex in sub-adults from archeological sites and forensic settings. Yet sexual dimorphism in deciduous dental attributes is less well documented than in permanent teeth. This analysis was conducted to document variation in sexual dimorphism within and between a global sample of populations.

METHODS

Mean deciduous tooth crown size was culled from published literature, yielding a sample of 37 groups. Mean mesiodistal (MD) and buccolingual (BL) crown dimensions are the basis for computing percent sexual dimorphism [(M/F-1) * 100]. Three analyses were conducted: (1) a statistical analysis of mean % sex dimorphism (%SD) within and between populations, (2) an evaluation of rank-ordered %SD by tooth, and (3) an assessment of intergroup patterns in degree of sexual dimorphism. Univariate tests of significance, correlation and regression, and multivariate cluster analysis were used.

RESULTS

Mean %SD is low overall (1.77) for 26 groups and the level of dimorphism is not significantly different for MD (1.68) and BL (1.72) dimensions. The most sexual dimorphic deciduous teeth include incisor, canine and molar tooth types, while in the permanent dentition canines are consistently most sexual dimorphic. Global variation in sexual dimorphism of deciduous tooth size is low with little inter-ethnic variation.

CONCLUSIONS

Sexual dimorphism in crown size is lower and more variably expressed than in permanent teeth. Differences may relate to developmental, chromosomal, and hormonal factors. Degree of sexual dimorphism is not associated with ethnicity in this global sample.

Patterns of variation in canal and root number in human post-canine teeth

Descriptive morphology of tooth roots traditionally focuses on number of canals and roots. However, how or if canal and root number are related is poorly understood. While it is often assumed that canal number is concomitant with root number and morphology, in practice canal number and morphology do not always covary with external root features. To investigate the relationship between canal and root number, fully developed, adult post‐canine teeth were examined and quantified from computerized tomography scans from a global sample of 945 modern humans. We tested the hypotheses that root and canal number do not follow a 1:1 ratio, that canal to root ratios differ between teeth, and that canal to root ratios differ across major human geographical groups. Results indicate that not only is root number dependent on canal number, but that this relationship becomes more variable as canal number increases, varies between individual teeth and by major geographical group, and changes as these groups increase in geographical distance from Sub‐Saharan Africa. These results show that the ratio of canal number to root number is an important indicator of variation in dental phenotypes.

Measurement of the morphological data of primary teeth in northwest China

OBJECTIVE

This study aims to digitally obtain the morphological data of children's primary teeth in northwest China and evaluate the reliability of digitally obtaining the anatomical morphological data of primary teeth.

METHODS

A total of 308 extracted primary teeth and cone-beam computed tomography (CBCT) images of 407 primary teeth were collected in northwest China. Electronic digital Vernier callipers (accuracy: 0.01 mm) were used to measure the mesiodistal and buccolingual diameters and crown length of the extracted primary teeth and calculate the crown area and crown index. Each sample was scanned with an intraoral scanner (Trios2 3shape, Denmark), and the resulting stl format files were imported into Geomagic Wrap 2015 to measure the axial and buccolingual diameters and crown length. The crown area and crown index were then calculated. After verifying the accuracy of the CBCT image measurement, the CBCT image data of 407 samples were measured in SmartV software using the "measure length" function by referring to the coronal, sagittal, and horizontal planes to adjust the position of the reference line.

RESULTS

Northern Chinese have larger primary teeth than other populations (Japanese, white American, African, Icelander, Spanish, and Dominican Mestizo) but smaller primary teeth than native Australians. Compared to Indian primary teeth, northwest Chinese's primary teeth have larger diameters on the central axis and smaller diameters on the buccolingual surface. Male teeth are usually larger than female teeth. Compared with the results of Wang Huiyun's study, the axial and buccolingual diameters and crown length of all native tooth types in this total sample were significantly smaller at the 0.1% level, and only the axial diameters of the upper first molar and lower second molar and the crown length of the lower lateral incisor were significantly smaller at the 1% level. The results of the intraclass correlation coefficient of 308 extracted primary teeth expressed an excellent degree of agreement between the callipers and intraoral scanner for the following: mesiodistal diameter (0.956-0.991), buccolingual diameter (0.963-0.989), crown length [0.864-0.992, except for the upper canine (0.690)], crown index (0.850-0.975), and crown area (0.946-0.993).

CONCLUSION

The digital measurements of the intraoral scanner and CBCT image are in good agreement with the manual measurement of the Vernier calliper. The difference between the anatomical morphology size of the primary teeth measured in this study and the results of different populations could be due to different genetic backgrounds and environmental factors.

Dimorphism in dental tissues: Sex differences in archaeological individuals for multiple tooth types

OBJECTIVES

Dimorphism in the dentition has been observed in human populations worldwide. However, research has largely focused on traditional linear crown measurements. As imaging systems, such as micro-computed tomography (micro-CT), become increasingly more accessible, new dental measurements such as dental tissue size and proportions can be obtained. This research investigates the variation of dental tissues and proportions by sex in archaeological samples.

MATERIALS AND METHODS

Upper and lower first incisor to second premolar tooth rows were obtained from 30 individuals (n = 300), from 3 archaeological samples. The teeth were micro-CT scanned and surface area and volumetric measurements were obtained from the surface meshes extracted. Dental wear was also recorded and differences between sexes determined.

RESULTS

Enamel and crown measurements were found to be larger in females. Conversely, dentine and root measurements were larger in males.

DISCUSSION

The findings support the potential use of dental tissues to estimate sex of individuals from archaeological samples, while also indicating that individuals aged using current dental aging methods may be underaged or overaged due to sex differences in enamel thickness.

Sex determination using maxillary arch width of pediatric population of Namakkal district, India: A forensic study

Aim and Objectives:

The aim of the study is to compute a new formula for sex determination using maxillary arch width of a pediatric population of Namakkal district.

Materials and Methods:

The sample consisted of 146 females and 218 males of South Indian origin aged between 4 and 6 years. Alginate impressions of the upper and lower dental arch were made, and casts were poured immediately. A digital vernier caliper was used to obtain measurements. Arch width at canine, first molar and second molar for both maxilla and mandible were considered for measurement. Statistical analysis was performed using the Statistical Package for the Social Sciences Version 20.0 software.

Results:

The Student's t-test was used to find out the significance between male and female among the different predictor variables at P < 0.05. Significant sexual dimorphism was found in maxillary intercanine width and maxillary first and second intermolar width with conical discriminant function coefficient of 0.732, −0.177 and −0.244, respectively.

Conclusion:

The formula derived from the present study could be of great value in sex determination of pediatric populations of Namakkal district.

The Crown Size and Sexual Dimorphism of Permanent Teeth in Jordanian Cleft Lip and Palate Patients

Objective:

To provide a detailed description of crown size dimensions in the permanent dentition of Jordanian cleft lip and palate patients and to compare the findings with those of other populations.

Method:

The mesiodistal crown diameters of the permanent teeth of 47 patients with unilateral cleft lip and palate (UCLP), 25 patients with bilateral cleft lip and palate (BCLP), and 74 controls were measured.

Results:

The cleft group (UCLP and BCLP patients) generally demonstrated a smaller tooth size for both the maxillary and mandibular arches than did the control group. A sexual dimorphism pattern with males having larger teeth than females was observed for controls and UCLP patients. More males with BCLP had smaller teeth than did females. In the maxilla, the UCLP cleft-side teeth showed the largest percentage (4%) of sexual dimorphism, whereas the BCLP teeth achieved the highest percentage (3.4%) in the mandible. The UCLP cleft-side maxillary lateral incisors (13.2%) and BCLP mandibular canines (6%) displayed greater sexual dimorphism in crown size than did any other tooth class.

Conclusions:

Tooth size reduction occurred across all permanent tooth types and among early and late-forming teeth in cleft patients compared with the controls. This reduction was more pronounced in the maxillary incisor field. Males with UCLP and control males had larger teeth than did females, whereas a reversal of the normal dimorphism pattern was observed in patients with BCLP.

Alveolar bone resorption after primary tooth loss has a negative impact on straightforward implant installation in patients with agenesis of the lower second premolar

OBJECTIVES

To compare the alveolar bone dimensions in patients with lower second premolar (P2) agenesis prior to and after primary molar loss on CT scans, and assess the possibility for straightforward implant placement.

METHODS

Alveolar bone dimensions were evaluated on 150 mandibular CT scans in three groups: (i) agenesis of P2, with the primary tooth in situ, and regularly erupted first premolar (P1) and molar (M1) (AW); (ii) agenesis of P2, without the primary tooth in situ for ≥3 m, but regularly erupted P1 and M1 (AWO); and (iii) P1, P2, and M1 regularly erupted (CTR). The possibility of straightforward placement of an implant 3.5 or 4.3 mm in Ø × 10 mm long was digitally simulated and compared to the actually performed treatment.

RESULTS

Buccolingual width (7.3 ± 2.0 mm) at the coronal aspect of the ridge in the AWO group was statistically significantly smaller comparing with both the AW (9.2 ± 1.4 mm) and the CTR (9.5 ± 1.1 mm) group; width reduction appeared to be mainly due to "collapse" of the buccal aspect of the ridge. Simulated straightforward placement of implants with a diameter of 3.5 or 4.3 mm was possible in 62% and 56% of the cases in the AWO vs. 86% and 84% in the AW group (p = .006 and .002, respectively). Straightforward implant placement was actually possible in all patients (22) in the AW group, while 28% (11 of 39) of the patients in the AWO group needed additional hard tissue augmentation.

CONCLUSIONS

Significant dimensional differences exist in the alveolar ridge, especially in the coronal part, at lower P2 agenesis sites missing the primary tooth for ≥3 m, when compared to P2 agenesis sites with the primary tooth in situ. It seems thus reasonable to advise that the primary second molar should be kept as long as possible, in order to facilitate straightforward implant installation and reduce the probability of additional bone augmentation procedures.

Demystifying the Mysteries: Sexual Dimorphism in Primary Teeth

INTRODUCTION

One of the critical steps in the process of identification is the sex determination of an unknown individual. Many studies have shown that sex can be determined using the human skeleton, especially by examining the pelvis and skull. Odontometric analysis of the human sexual variation has been less investigated, especially of primary dentition.

AIM

To verify the presence of sexual dimorphism in primary teeth of local population of Faridabad, Haryana, India.

MATERIALS AND METHODS

The research was performed on dental casts of 500 children (250 boys and 250 girls, age range 3-5 years). Mesiodistal and buccolingual crown dimensions of maxillary and mandibular primary teeth were measured with a digital Vernier's caliper and were analysed for sexual dimorphism. Mann-Whitney-U test was used to check the statistical significance of difference in tooth dimensions among boys and girls.

RESULTS

Differences were found in the mean values of mesiodistal and buccolingual diameters of primary teeth, in which boys generally had larger crown diameters than girls.

CONCLUSION

Primary teeth may be used as an additional tool for sex identification of juvenile skeletons where other dimorphic features are not much developed.

Interpretative potential of dental metrics for biodistance analysis in hunter-gatherers from central Argentina. A theoretical-methodological approach

The use of dental metrics as a reliable tool for the assessment of biological distances has diversified dramatically in the last decades. In this paper some of the basic assumptions on this issue and the potential of cervical measurements in biodistance protocols are discussed. A sample of 1173 permanent teeth from 57 male and female individuals, recovered in Chenque I site (western Pampas, central Argentina), a Late Holocene hunter-gatherer cemetery, is examined in order to test the impact of exogenous factors that may have influenced the phenotypic manifestation and affected dental crown sizes. The statistical association between dental metric data, obtained by measuring the mesiodistal and buccolingual diameters of the crown and cervix, and the quantification of hypoplastic defects as a measure to evaluate the influence of the environment in the dental phenotypic expression is evaluated. The results show that socioenvironmental stress did not affect dental metrics and that only the more stable teeth (first incisors, canines, first premolars and first molars) and three variables (buccolingual diameter of the crown and both mesiodistal and buccolingual measurements of the cervix) should be included in multivariate analyses. These suggestions must be strengthened with additional studies of other regional samples to identify factors of variation among populations, so as to develop general guidelines for dental survey and biodistance analysis, but they are a first step for discussing assumptions usually used and maximizing the available information for low-density hunter-gatherer societies.

Volume measurement of crowns in mandibular primary central incisors by micro-computed tomography

OBJECTIVE

To determine sex differences in the tissue proportions of crowns of mandibular primary central incisors in Chinese children and to quantify the volume of crown components in three dimensions using micro-computed tomography (micro-CT).

MATERIALS AND METHODS

The specimens used in this study were 41 mandibular first deciduous incisor teeth with intact crowns (21 males and 20 females) obtained from patients between 5-6 years of age. Each specimen was scanned using micro-CT at a resolution of 0.05 mm and 3D-rendered images were created. The volume of each component of the crown was measured and examined for differences in different sex and ages.

RESULTS

The pulp chamber volume decreased with age and the volume ratio of the pulp chamber to the whole crown was significantly smaller in 6-year-olds than in 5-year-olds (p < 0.05).

CONCLUSIONS

Males had significantly larger tooth crown volumes and dentin volumes than females did (p < 0.001), while the volume of enamel showed no sexual dimorphism.

Sex estimation based on deciduous and permanent dentition in a contemporary Spanish population

Sex estimation of skeletal remains with satisfactory allocation accuracy represents an essential step in reconstructing the biological profile of unknown individuals in archaeological research and forensic practice. Teeth are among the most frequently recovered physical elements of an individual that remain after death due to their hardness, durability, and resistance to postmortem insults. This study was based on the deciduous and permanent dentition of 269 individuals (150 males and 119 females) from the Granada osteological collection of identified infants, young children, and adults (Granada, Spain). Mesiodistal, buccolingual, and diagonal crown and cervical diameters of both dentitions were measured, and logistic regression analyses were performed to create equations for sex discrimination. The results show that the first and second deciduous molars and the permanent canines are the teeth with the greatest sexual dimorphism, providing percentages of correct assignment of sex between 78.1 and 93.1% in deciduous dentition and between 79.4 and 92.6% in permanent teeth, depending on the dimensions used. The results indicate that this method may be applicable as an adjunct with other accepted procedures for sex estimation when fragmentary skeletal remains are encountered in archaeological excavations and in forensic contexts.

Carabelli's trait and tooth size of human maxillary first molars

Carabelli's trait is a morphological feature that can occur on the protocone of human maxillary molars. This study tests the hypothesis that Carabelli's trait is correlated statistically with the dimensions of the crown's four principal cusps or whether, as a cingular feature, the trait truly accretes onto an otherwise unaffected crown. Computer-assisted image analysis was used to measure the 6 intercusp distances and 12 angular relationships among cusp tips on the permanent first molar of 300 young adult American whites. Carabelli's complex was scored using an 8-grade ordinal scheme. Crown size was quantified in three ways, namely as 1) maximum mesiodistal and buccolingual diameters, 2) the 6 intercusp distances, and 3) the 12 angular cusp arrangements. There was no sex difference in the morphological expression of Carabelli's trait in this sample. Overall crown size and intercusp distances were significantly and progressively larger in molars with larger Carabelli's trait expressions. There are graded size responses between crown size (mesiodistal and buccolingual diameters), sizes of the four principal cusps, and morphological stage of Carabelli's complex, though the statistical relationships are appreciably stronger in males than females. Carabelli's trait occurs preferentially in larger molars. In contrast, angular (shape) relationships among cusp tips are not discernibly affected by trait size in either sex. There is the situation, then, that Carabelli's trait is developmentally correlated with crown size, but with no apparent alteration of cusp arrangements, suggesting that the increases are isometric across the occlusal table. Why the association is much weaker in females remains speculative, but these data provide yet another line of evidence that, within a population, tooth size is associated in a positive fashion with crown complexity.

Dentition of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, part 1: Quantitative variation

Analyses of dental variation in geographically restricted, wild populations of primates are extremely rare; however, such data form the best source for models of likely degrees of variation within and between fossil species. Data from dental casts of a geographically restricted population of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, document high levels of dental variability, as measured by coefficients of variation, in a nonsexually dimorphic species, despite its isolation and small population size. Like other primates, moustached tamarins show lower variability in the dimensions of the first molars and increased variability in the dimensions of the final molars in the toothrow. Moustached tamarins from Padre Isla have a distinctive pattern of variability in the remaining teeth, including more stable tooth lengths in the anterior and posterior portions of the toothrow, and more stable tooth widths in the midregion of the toothrow. High variability in incisor width may be due to age effects of a distinctive diet and pattern of dental wear.

Modern human molar enamel thickness and enamel-dentine junction shape

This study examines cross-sections of molar crowns in a diverse modern human sample to quantify variation in enamel thickness and enamel-dentine junction (EDJ) shape. Histological sections were generated from molars sectioned buccolingually across mesial cusps. Enamel cap area, dentine area, EDJ length, and bi-cervical diameter were measured on micrographs using a digitizing tablet. Nine landmarks along the EDJ were defined, and X and Y coordinates were digitized in order to quantify EDJ shape. Upper molars show greater values for the components of enamel thickness, leading to significantly greater average enamel thickness than in lower molars. Average enamel thickness increased significantly from M1 to M3 in both molar rows, due to significantly increasing enamel cap area in upper molars, and decreasing dentine area in lower molars. Differences in EDJ shape were found among maxillary molars in combined and individual populations. Sex differences were also found; males showed significantly greater dentine area, EDJ length, and bi-cervical diameters in certain tooth types, which resulted in females having significantly thicker average enamel. Differences in enamel thickness and EDJ shape within molars were also found among populations, although few consistent trends were evident. This study demonstrates that enamel thickness and EDJ shape vary among molars, between sexes, and among populations; these factors must be considered in the categorization and comparison of ape and human molars, particularly when isolated teeth or fossil taxa are included. Human relative enamel thickness encompasses most values reported for fossil apes and humans, suggesting limited taxonomic value when considered alone.

Variation in mineral properties in normal and mutant bones and teeth

Hydroxyapatite mineral is deposited in an organized fashion in the matrices of bones and teeth. The amount of mineral present, the composition of the mineral, and the size of the mineral crystals varies with both tissue and animal age, diet, health status, and the tissue being examined. Here, we review methods for measuring these differences in mineral properties and provide some illustrations from bones and teeth of animals in which the small leucine-rich proteoglycans (biglycan and decorin) were ablated. Differences in mineral properties between biglycan-deficient bones and teeth are related to the functions of this small proteoglycan in these tissues.