J-Aggregate: von ihrer zufälligen Entdeckung bis zum gezielten supramolekularen Aufbau funktioneller Farbstoffmaterialien

Tuning Shortwave-Infrared J-aggregates of Aromatic Ring-Fused Aza-BODIPYs by Peripheral Substituents for Combined Photothermal and Photodynamic Therapies at Ultralow Laser Power

Achieving photothermal therapy (PTT) at ultralow laser power density is crucial for minimizing photo-damage and allowing for higher maximum permissible skin exposure. However, this requires photothermal agents to possess not just superior photothermal conversion efficiency (PCE), but also exceptional near-infrared (NIR) absorptivity. J-aggregates, exhibit a significant redshift and narrower absorption peak with a higher extinction coefficient. Nevertheless, achieving predictable J-aggregates through molecular design remains a challenge. In this study, we successfully induced desirable J-aggregation (λabs max : 968 nm, ϵ: 2.96×105  M-1  cm-1 , λem max : 972 nm, ΦFL : 6.2 %) by tuning electrostatic interactions between π-conjugated molecular planes through manipulating molecular surface electrostatic potential of aromatic ring-fused aza-BODIPY dyes. Notably, by controlling the preparation method for encapsulating dyes into F-127 polymer, we were able to selectively generate H-/J-aggregates, respectively. Furthermore, the J-aggregates exhibited two controllable morphologies: nanospheres and nanowires. Importantly, the shortwave-infrared J-aggregated nanoparticles with impressive PCE of 72.9 % effectively destroyed cancer cells and mice-tumors at an ultralow power density of 0.27 W cm-2 (915 nm). This phototherapeutic nano-platform, which generates predictable J-aggregation behavior, and can controllably form J-/H-aggregates and selectable J-aggregate morphology, is a valuable paradigm for developing photothermal agents for tumor-treatment at ultralow laser power density.

Modulating the Differentiation of Kinetically Controlled Supramolecular Polymerizations through the Alkyl Bridge Length

The synthesis and self-assembling features of N-annulated perylenebisimides (N-PBIs) 2-4 are reported and compared with the complex self-assembly of N-PBI 1. The studies presented herein demonstrate that increasing the length of the alkyl spacer separating the central aromatic core of the dye and the peripheral side chains cancels the differentiation on the corresponding supramolecular polymerization. Thus, only 2 is able to form two different supramolecular polymorphs. The formation of kinetically trapped monomeric species is observed for all the N-PBIs 2-4. These metastable species, constituted by intramolecularly H-bonded pseudocycles of 7, 8, 9, or 10 members for compounds 1, 2, 3, and 4, respectively, provoke kinetically controlled supramolecular polymerizations that can be accelerated by the addition of seeds. The results presented herein shed light on the intricate process of differentiation in self-assembly.

Charge-Segregated Stacking Structure with Anisotropic Electric Conductivity in NIR-Absorbing and Emitting Positively Charged π-Electronic Systems

Squarylium-based π-electronic cation with an augmented dipole was synthesized by methylation of zwitterionic squarylium. The cation formed various ion pairs in combination with anions, and the ion pairs exhibited distinct photophysical properties in the dispersed state, ascribed to the formation of J- and H-aggregates. The ion pairs provided solid-state assemblies based on cation stacking. It is noteworthy that complete segregation of cations and anions was observed in a pseudo-polymorph of the ion pair with pentacyanocyclopentadienide as a π-electronic anion. In the crystalline state, the ion pairs exhibited photophysical properties and electric conductivity derived from cation stacking. In particular, the charge-segregated ion-pairing assembly induces an electric conductive pathway along the stacking axis. The charge-segregated mode and fascinating properties were derived from the reduced electrostatic repulsion between adjacent π-electronic cations via dipole-dipole interactions.

Enantiomeric Resolution and Enantiomer Isolation of H2 TPPS4 J-Aggregate from Aqueous Solution Is Enabled by Vortexes

Protonated achiral H₂ TPPS4 spontaneously self-arranges at acids pH and high ionic strength to build mesoscopic J-aggregates that are intrinsically chiral. According to the symmetry rule aggregation leads to a racemate that, however, can be unbalanced by chemical (chiral pollutants) or physical stimuli (as vortexing the solution). Vortexing the title racemate, in principle, might either induce chiral separation or chiral enrichment. Indeed, herein it is shown that vortices enable the resolution of this racemic solution exploiting the tendency to deposit, onto the quartz cuvette walls, of the enantiomer favored by the stirring sense. Simultaneously, over time, it was found that the opposite chiral conformation becomes prevalent in solution realizing a significant enantiomeric resolution. Therefore, after removing all stirring-favored chiral J-aggregate from the solution, the recovering and isolating of the desired enantiomers from the cuvette walls was successfully obtained without complex procedures. In this sense, it has been demonstrated that the stirring forces are executively able to fulfil the chiral separation in H₂ TPPS4 J-aggregates, employed as model of a self-assembled system in aqueous solution.

Design Concepts for Solution and Solid-State Emitters - A Modern Viewpoint on Classical and Non-Classical Approaches

For a long time, luminescence phenomena were strictly distinguished between the emission of isolated molecules in dilute solutions or close-packed structures such as in powders or aggregates. This changed with the breakthrough observation of dual-state efficient materials, which led to a rapid boost of publications examining the influence of structural features to achieve balanced emission with disregarded molecular surroundings. Some first general structural design concepts have already been proposed based on reoccurring patterns and pivotal motifs. However, we have found another way to classify these solution and solid-state emitters (SSSEs). Hence, this minireview aims to present an overview of published structural features of SSSEs while shining light on design concepts from a more generalized perspective. Since SSSEs are believed to bridge the gap of hitherto known aggregation-sensitive compound classes, we hope to give future scientists a versatile tool in hand to efficiently design novel luminescent materials.

Two-Dimensional Excitonic Networks Directed by DNA Templates as an Efficient Model Light-Harvesting and Energy Transfer System

Photosynthetic organisms organize discrete light-harvesting complexes into large-scale networks to facilitate efficient light collection and utilization. Inspired by nature, herein, synthetic DNA templates were used to direct the formation of dye aggregates with a cyanine dye, K21, into discrete branched photonic complexes, and two-dimensional (2D) excitonic networks. The DNA templates ranged from four-arm DNA tiles, ≈10 nm in each arm, to 2D wireframe DNA origami nanostructures with different geometries and varying dimensions up to 100×100 nm. These DNA-templated dye aggregates presented strongly coupled spectral features and delocalized exciton characteristics, enabling efficient photon collection and energy transfer. Compared to the discrete branched photonic systems templated on individual DNA tiles, the interconnected excitonic networks showed approximately a 2-fold increase in energy transfer efficiency. This bottom-up assembly strategy paves the way to create 2D excitonic systems with complex geometries and engineered energy pathways.

Cyanine Dye Coupling Mediates Self-assembly of a pH Sensitive Peptide into Novel 3D Architectures

Synthetic multichromophore systems are of great importance in artificial light harvesting devices, organic optoelectronics, tumor imaging and therapy. Here, we introduce a promising strategy for the construction of self-assembled peptide templated dye stacks based on coupling of a de novo designed pH sensitive peptide with a cyanine dye Cy5 at its N-terminus. Microscopic techniques, in particular cryogenic TEM (cryo-TEM) and cryo-electron tomography technique (cryo-ET), reveal two types of highly ordered three-dimensional assembly structures on the micrometer scale. Unbranched compact layered rods are observed at pH 7.4 and two-dimensional membrane-like assemblies at pH 3.4, both species displaying spectral features of H-aggregates. Molecular dynamics simulations reveal that the coupling of Cy5 moieties promotes the formation of both ultrastructures, whereas the protonation states of acidic and basic amino acid side chains dictates their ultimate three-dimensional organization.

Theoretical Models, Preparation, Characterization and Applications of Cyanine J-Aggregates: A Minireview

Cyanines are one of the few kinds of molecules whose absorbance and emission can be shifted in a broad spectral range from the ultraviolet to the near infrared. They can easily transform into J-aggregates with narrow absorption and emission peaks, along with a redshift in their spectra. This mini-review presents cyanine dyes and their J-aggregates and discusses their structure and spectral properties that illustrate their specificities. We summarize the theoretical and experimental state of the art on cyanine J-aggregates and their applications, also laying the groundwork for cyanine J-aggregates synthesis and characterization methods.

Nitric-Oxide-Releasing aza-BODIPY: A New Near-Infrared J-Aggregate with Multiple Antibacterial Modalities

The development of near-infrared (NIR) J-aggregates has received increasing attention due to their broad applications. Here, we report the nitrosation of an amine-containing aza-BODIPY precursor (BDP-NH₂ ), affording the first nitric oxide (NO)-releasing NIR J-aggregate (BDP-NO). The introduction of N-nitrosamine moieties efficiently inhibits the aromatic interactions of BDP-NH₂ , which instead promotes the formation of J-aggregates within micellar nanoparticles with a remarkable bathochromic shift of ≈109 nm to the NIR window (820 nm). Interestingly, the NO release and photothermal conversion efficiency (PTCE) can be delicately tuned by the loading contents of BDP-NO within micellar nanoparticles, thereby enabling multiple antibacterial modalities by exploring either NO release, photothermal therapy (PTT), or both. We demonstrate the combination of NO and PTT can elevate antibacterial activity while attenuating PTT-associated inflammation for the in vivo treatment of MRSA infection.

Slip-Stacked J-Aggregate Materials for Organic Solar Cells and Photodetectors

Dye-dye interactions affect the optical and electronic properties in organic semiconductor films of light harvesting and detecting optoelectronic applications. This review elaborates how to tailor these properties of organic semiconductors for organic solar cells (OSCs) and organic photodiodes (OPDs). While these devices rely on similar materials, the demands for their optical properties are rather different, the former requiring a broad absorption spectrum spanning from the UV over visible up to the near-infrared region and the latter an ultra-narrow absorption spectrum at a specific, targeted wavelength. In order to design organic semiconductors satisfying these demands, fundamental insights on the relationship of optical properties are provided depending on molecular packing arrangement and the resultant electronic coupling thereof. Based on recent advancements in the theoretical understanding of intermolecular interactions between slip-stacked dyes, distinguishing classical J-aggregates with predominant long-range Coulomb coupling from charge transfer (CT)-mediated or -coupled J-aggregates, whose red-shifts are primarily governed by short-range orbital interactions, is suggested. Within this framework, the relationship between aggregate structure and functional properties of representative classes of dye aggregates is analyzed for the most advanced OSCs and wavelength-selective OPDs, providing important insights into the rational design of thin-film optoelectronic materials.

Transforming Dyes into Fluorophores: Exciton‐Induced Emission with Chain‐like Oligo‐BODIPY Superstructures

Herein we present a systematic study demonstrating to which extent exciton formation can amplify fluorescence based on a series of ethylene‐bridged oligo‐BODIPYs. A set of non‐ and weakly fluorescent BODIPY motifs was selected and transformed into discrete, chain‐like oligomers by linkage via a flexible ethylene tether. The prepared superstructures constitute excitonically active entities with non‐conjugated, Coulomb‐coupled oscillators. The non‐radiative deactivation channels of Internal Conversion (IC), also combined with an upstream reductive Photoelectron Transfer (rPET) and Intersystem Crossing (ISC) were addressed at the monomeric state and the evolution of fluorescence and (non‐)radiative decay rates studied along the oligomeric series. We demonstrate that a “masked” fluorescence can be fully reactivated irrespective of the imposed conformational rigidity. This work challenges the paradigm that a collective fluorescence enhancement is limited to sterically induced motional restrictions.

Discs to a 'Bright' Future: Exploring Discotic Liquid Crystals in Organic Light Emitting Diodes in the Era of New-Age Smart Materials

With the advent of a new decade and the paradigm shift of every sphere of urban life to virtual platforms, it has become imperative for the global researcher community to channelize efforts into upgradation of the existing display-technology. In this context, discotic liquid crystals (DLCs) are a class of self-assembling organic materials that are recently being explored in fabricating the emissive layers of organic light emitting diodes (OLEDs). With their unique inherent structural and functional properties, they have the potential to challenge the currently prevailing OLED-emitters. Yet the applications of this promising class of materials in OLEDs have not been comprehensively reviewed in literature till now. In this account, we present an overview of the developments in the field of luminescent DLC-based emitters, supported by their associated photophysical phenomena and their performance parameters as emitters in fabricated OLED devices.

A Highly Fluorescent Dinuclear Aluminium Complex with Near‐Unity Quantum Yield**

The high natural abundance of aluminium makes the respective fluorophores attractive for various optical applications, but photoluminescence quantum yields above 0.7 have yet not been reported for solutions of aluminium complexes. In this contribution, a dinuclear aluminium(III) complex featuring enhanced photoluminescence properties is described. Its facile one‐pot synthesis originates from a readily available precursor and trimethyl aluminium. In solution, the complex exhibits an unprecedented photoluminescence quantum yield near unity (Φ_absolute 1.0±0.1) and an excited‐state lifetime of 2.3 ns. In the solid state, J‐aggregation and aggregation‐caused quenching are noted, but still quantum yields of 0.6 are observed. Embedding the complex in electrospun non‐woven fabrics yields a highly fluorescent fleece possessing a quantum yield of 0.9±0.04.

Anti-cooperative Self-Assembly with Maintained Emission Regulated by Conformational and Steric Effects

Herein, we present a strategy to enable a maintained emissive behavior in the self‐assembled state by enforcing an anti‐cooperative self‐assembly involving weak intermolecular dye interactions. To achieve this goal, we designed a conformationally flexible monomer unit 1 with a central 1,3‐substituted (diphenyl)urea hydrogen bonding synthon that is tethered to two BODIPY dyes featuring sterically bulky trialkoxybenzene substituents at the meso‐position. The competition between attractive forces (H‐bonding and aromatic interactions) and destabilizing effects (steric and competing conformational effects) limits the assembly, halting the supramolecular growth at the stage of small oligomers. Given the presence of weak dye–dye interactions, the emission properties of molecularly dissolved 1 are negligibly affected upon aggregation. Our findings contribute to broadening the scope of emissive supramolecular assemblies and controlled supramolecular polymerization.

Spatial Distribution of Intracellular Ion Concentrations in Aggregate-Forming HeLa Cells Analyzed by μ-XRF Imaging

Protein aggregation is a hallmark of several severe neurodegenerative disorders such as Huntington's, Parkinson's, or Alzheimer's disease. Metal ions play a profound role in protein aggregation and altered metal‐ion homeostasis is associated with disease progression. Here we utilize μ‐X‐ray fluorescence imaging in combination with rapid freezing to resolve the elemental distribution of phosphorus, sulfur, potassium, and zinc in huntingtin exon‐1‐mYFP expressing HeLa cells. Using quantitative XRF analysis, we find a threefold increase in zinc and a 10‐fold enrichment of potassium that can be attributed to cellular stress response. While the averaged intracellular ion areal masses are significantly different in aggregate‐containing cells, a local intracellular analysis shows no different ion content at the location of intracellular inclusion bodies. The results are compared to corresponding experiments on HeLa cells forming pseudoisocyanine chloride aggregates. As those show similar results, changes in ion concentrations are not exclusively linked to huntingtin exon‐1 amyloid formation.

Highly Selective and Sensitive Aggregation-Induced Emission of Fluorescein-Coated Metal Oxide Nanoparticles

We report the synthesis, characterization, and photophysical properties of novel metal oxide nanoparticles (NPs) coated with specially designed fluorescein substituents which are capped with electron-withdrawing groups. The fluorescein-coated nanoparticles were synthesized in excellent yields, and their structures were confirmed using various advanced spectroscopic, instrumental, and surface analysis techniques, revealing the formation of the target functionalized nanoparticles (FNPs) which show superior chemical and thermal stabilities. In addition, the photophysical properties of the FNPs were examined using UV-visible absorption and fluorescence spectroscopy. These latter techniques disclosed aggregation-induced emission (AIE) properties for most of the target FNPs, namely those which are soluble in common organic solvents at selective concentration ranges of water fractions in the solvent mixture.

Synergistic Effects of Chlorination and Branched Alkyl Side Chain on the Photovoltaic Properties of Simple Non-Fullerene Acceptors with Quinoxaline as the Core

To date, the fused-ring electron acceptors show the best photovoltaic performances, and the development of simple non-fullerene acceptors via intramolecular noncovalent interactions can reduce synthetic costs. In this work, four simple non-fullerene acceptors with an A-D-A'-D-A configuration (QCIC1, QCIC2, QCIC3, and QCIC4) were synthesized. They contained the same conjugated backbone (A': quinoxaline; D: cyclopentadithiophene; A: dicyano-indanone) but different halogen atoms and alkyl side chains. Due to the chlorination on the end-groups and the most and/or longest branched alkyl side chains on the backbone, the blended film composed of QCIC3 and donor poly{[2,6'-4,8-di(5-ethylhexylthienyl)benzo [1,2-b : 4,5-b']dithiophene]-alt-[5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c : 4',5'-c']dithiophene-4,8-dione)]} (PBDB-T) exhibited the strongest π-π stacking and the most suitable phase-separation domains among the four blended films. Therefore, the QCIC3-based organic solar cells yielded the highest power conversion efficiency of 10.55 %. This work provides a pathway to optimize the molecular arrangements and enhance the photovoltaic property of simple electron acceptors through subtle chemical modifications.

Regulation of Thermally Activated Delayed Fluorescence to Room-Temperature Phosphorescent Emission Channels by Controlling the Excited-States Dynamics via J- and H-Aggregation

Control of excited-state dynamics is key in tuning room-temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) emissions but is challenging for organic luminescent materials (OLMs). We show the regulation of TADF and RTP emissions of a boron difluoride β-acetylnaphthalene chelate (βCBF₂ ) by controlling the excited-state dynamics via its J- and H-aggregation states. Two crystalline polymorphs emitting green and red light have been controllably obtained. Although both monoclinic, the green and red crystals are dominated by J- and H-aggregation, respectively, owing to different molecular packing arrangements. J-aggregation significantly reduces the energy gap between the lowest singlet and triplet excited states for ultra-fast reverse intersystem crossing (RISC) and enhances the radiative singlet decay, together leading to TADF. The H-aggregation accelerates the ISC and suppresses the radiative singlet decay, helping to stabilize the triplet exciton for RTP.

Columnar Mesomorphism of Board-Shaped Perylene, Diketopyrrolopyrrole, Isoindigo, Indigo, and Quinoxalino-Phenanthrophenazine Dyes

The properties of organic dyes depend as much on their intermolecular interactions as on their molecular structure. While it is generally predictable what supramolecular structure would be ideal for a specific application, the generation of specific supramolecular structures by molecular design and suitable processing methods remains to be a challenge. A versatile approach to different supramolecular structures has been the application of mesomorphism in conjunction with alignment techniques and self-assembly at interfaces. Reviewed here is the columnar mesomorphism of board-shaped dyes perylene, indigo, isoindigo, diketopyrrolopyrrole, and quinoxalinophenanthrophenazine. They generate a larger number of different supramolecular structures than conventional disc-shaped (discotic) mesogens because of their non-circular shape and directional intermolecular interactions. The mesomorphism of all but the perylene derivatives is systematically and comprehensively covered for the first time.

Externally Regulated Specific Molecular Recognition Driven Pathway Selectivity in Supramolecular Polymerization

This article reveals 4-dimethylaminopyridine (DMAP) regulated pathway selectivity in the supramolecular polymerization of a naphthalene-diimide derivative (NDI-1), appended with a carboxylic acid group. In decane, NDI-1 produces ill-defined aggregate (Agg-1) due to different H-bonding motifs of the -COOH group. With one mole equivalent DMAP, the NDI-1/DMAP complex introduces new nucleation condition and exhibits a cooperative supramolecular polymerization producing J-aggregated fibrillar nanostructure (Agg-2). With 10 % DMAP and fast cooling (10 K/min), similar nucleation and open chain H-bonding with the free monomer in an anti-parallel arrangement produces identical J-aggregate (Agg-2a). With 2.5 % DMAP and slow cooling (1 K/min), a distinct nucleation and supramolecular polymerization pathway emerge leading to the thermodynamically controlled Agg-3 with face-to-face stacking and 2D-morphology. Slow cooling with 5-10 % DMAP produces a mixture of Agg-2a and Agg-3. Computational modelling studies provide valuable insights into the internal order and the pathway complexity.

Tuning J-aggregate Formation and Emission Efficiency in Cationic Diazapentacenium Dyes

Enhancement of the luminescence efficiency of two new diazapentacenium salts (D1 and D2) of more than 55 for D1 and 22 times for D2) in poor solvents, acetonitrile and/or dichloromethane, was observed and rationalized as formation of emissive J-aggregates. Both compounds displaying 4-n-decylphenyl substituents at the 7,14-carbons and phenyl (D1) or 2,6-difluorophenyl (D2) substituents at the quaternary nitrogen atoms in 5,12-positions have been synthetized in a two-step procedure involving a two-fold Buchwald-Hartwig-type CN cross-coupling and an electrophilic Friedel-Crafts-type cyclization. The optical properties of the dicationic diazapentacenium salts in various solvents and in thin films have been investigated by steady-state and time-resolved absorption and photoluminescence spectroscopies. In thin films and in good solvents, isolated molecules coexist with aggregates. Nonetheless, D1 is seven times more emissive than D2, reflecting a higher J-aggregate contribution in the former.

Polymorphism in Squaraine Dye Aggregates by Self-Assembly Pathway Differentiation: Panchromatic Tubular Dye Nanorods versus J-Aggregate Nanosheets

A bis(squaraine) dye equipped with alkyl and oligoethyleneglycol chains was synthesized by connecting two dicyanomethylene substituted squaraine dyes with a phenylene spacer unit. The aggregation behavior of this bis(squaraine) was investigated in non-polar toluene/tetrachloroethane (98:2) solvent mixture, which revealed competing cooperative self-assembly pathways into two supramolecular polymorphs with entirely different packing structures and UV/Vis/NIR absorption properties. The self-assembly pathway can be controlled by the cooling rate from a heated solution of the monomers. For both polymorphs, quasi-equilibrium conditions between monomers and the respective aggregates can be established to derive thermodynamic parameters and insights into the self-assembly mechanisms. AFM measurements revealed a nanosheet structure with a height of 2 nm for the thermodynamically more stable polymorph and a tubular nanorod structure with a helical pitch of 13 nm and a diameter of 5 nm for the kinetically favored polymorph. Together with wide angle X-ray scattering measurements, packing models were derived: the thermodynamic polymorph consists of brick-work type nanosheets that exhibit red-shifted absorption bands as typical for J-aggregates, while the nanorod polymorph consists of eight supramolecular polymer strands of the bis(squaraine) intertwined to form a chimney-type tubular structure. The absorption of this aggregate covers a large spectral range from 550 to 875 nm, which cannot be rationalized by the conventional exciton theory. By applying the Essential States Model and considering intermolecular charge transfer, the aggregate spectrum was adequately reproduced, revealing that the broad absorption spectrum is due to pronounced donor-acceptor overlap within the bis(squaraine) nanorods. The latter is also responsible for the pronounced bathochromic shift observed for the nanosheet structure as a result of the slip-stacked arranged squaraine chromophores.

Biomimetic Nanoemulsion for Synergistic Photodynamic-Immunotherapy Against Hypoxic Breast Tumor

Photodynamic therapy (PDT) is commonly used as an "in situ vaccine" to enhance the response rate of PD-1/PD-L1 antibodies. Unfortunately, the high cost and adverse effects of these antibodies, and the hypoxic state of solid tumors limits the efficacy of synergistic photodynamic-immunotherapy. Here, we developed a biomimetic nanoemulsion camouflaged with a PD-1-expressing cell membrane for synergistic photodynamic-immunotherapy against hypoxic breast tumors. The perfluorocarbon of the nanoemulsion could provide oxygen as the source of PDT against hypoxic tumors. Moreover, co-delivering a photosensitizer and the PD-1 protein (substituting for a PD-L1 antibody) achieves the synergy effect of PDT and immunotherapy. Synergistic photodynamic-immunotherapy completely inhibited primary and distant subcutaneous 4T1 tumors, mechanistically by boosting the maturation of dendritic cells and tumor infiltration of cytotoxic T lymphocytes.

Fluorogenic Squaraine Dendrimers for Background-Free Imaging of Integrin Receptors in Cancer Cells

To overcome the limited brightness of existing fluorogenic molecular probes for biomolecular targets, we introduce a concept of fluorogenic dendrimer probe, which undergoes polarity-dependent switching due to intramolecular aggregation-caused quenching of its fluorophores. Based on a rational design of dendrimers with four and eight squaraine dyes, we found that octamer bearing dyes through a sufficiently long PEG(8) linker displays >400-fold fluorescence enhancement from water to non-polar dioxane. High extinction coefficient (≈2,300,000 m^-1  cm^-1 ) resulted from eight squaraine dyes and quantum yield (≈25 %) make this octamer the brightest environment-sensitive fluorogenic molecule reported to date. Its conjugate with cyclic RGD used at low concentration (3 nm) enables integrin-specific fluorescence imaging of cancer cells with high signal-to-background ratio. The developed dendrimer probe is a "golden middle" between molecular probes and nanoparticles, combining small size, turn-on response and high brightness, important for bioimaging.

White light employing luminescent engineered large (mega) Stokes shift molecules: a review

Large (mega) Stokes shift molecules have shown great potential in white light emission for optoelectronic applications, such as flat panel display technology, light-emitting diodes, photosensitizers, molecular probes, cellular and bioimaging, and other applications. This review aims to summarize recent developments of white light generation that incorporate a large Stokes shift component, key approaches to designing large Stokes shift molecules, perspectives on future opportunities, and remaining challenges confronting this emerging research field. After a brief introduction of feasible pathways in generating white light, exemplifications of large Stokes shift molecules as white light candidates from organic and inorganic-based materials are illustrated. Various possible ways to design such molecules have been revealed by integrating the photophysical mechanisms that are essential to produce red-shifted emission upon photoexcitation, such as excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), excited state geometrical relaxation or structural deformation, aggregation-induced emission (AIE) alongside the different formations of aggregates, interplay between monomer and excimer emission, host-guest interaction, and lastly metal to ligand charge transfer (MLCT) via harvesting triplet state. Furthermore, previously reported fluorescent materials are described and categorized based on luminescence behaviors on account of the Stokes shifts value. This review will serve as a rationalized introduction and reference for researchers who are interested in exploring large or mega Stokes shift molecules, and will motivate new strategies along with instigation of persistent efforts in this prominent subject area with great avenues.

Probing Transient DNA Conformation Changes with an Intercalative Fluorescent Excimer

Variation of DNA conformation is important in regulating gene expression and mediating drug-DNA interactions. However, directly probing transient DNA conformation changes is challenging owing to the dynamic nature of this process. We show a label-free fluorescence method to monitor transient DNA conformation changes in DNA structures with various lengths and shapes using a DNA intercalator, K21. K21 can form transient excimers on the surface of DNA; the ratiometric emission of monomer and excimer correlate to DNA transient conformation stability in numerous DNA structures, including i-motifs, G-quadruplex structures, and single nucleotide mutation at random position. We analyzed the conformation dynamics of a single plasmid before and after enzyme digestion with confocal fluorescence microscopy. This method provides a label-free fluorescence strategy to probe transient conformation changes of DNA structures and has potential in uncovering transient genomic processes in living cells.

Metal-Free Organic Luminophores that Exhibit Dual Fluorescence and Phosphorescence Emission at Room Temperature

Dual-fluorescent-phosphorescent compounds have attracted increasing attention in various fields, such as bio-imaging, data protection/encryption, ratiometric luminescence sensing, and white-light emission. Conventional dual-emissive compounds contain a phosphorescent organometallic complex of a precious metal, such as iridium or platinum. However, the use of precious metals in organic materials has several drawbacks. This Minireview focuses on precious-metal-free organic light-emitting materials that exhibit dual fluorescence and phosphorescence emission in the solid state at room temperature to produce bimodal steady-state emission spectra. The dual emitters presented herein are categorized into the following six compound classes: (1) difluoroboron diaroylmethanes, (2) diarylketones, (3) diarylsulfones, (4) triazines and pyrimidines, (5) fused phenazines, and (6) N-arylcarbazoles.