High-Rate Charge-Carrier Transport in Porphyrin Covalent Organic Frameworks: Switching from Hole to Electron to Ambipolar Conduction

An Appraisal for Providing Charge Transfer (CT) Through Synthetic Porous Frameworks for their Semiconductor Applications

In recent years, there has been considerable focus on the development of charge transfer (CT) complex formation as a means to modify the band gaps of organic materials. In particular, CT complexes alternate layers of aromatic molecules with donor (D) and acceptor (A) properties to provide inherent electrical conductivity. In particular, the synthetic porous frameworks as attractive D-A components have been extensively studied in recent years in comparison to existing D-A materials. Therefore, in this work, the synthetic porous frameworks are classified into conjugated microporous polymers (CMPs), covalent organic frameworks (COFs), and metal-organic frameworks (MOFs) and compare high-quality materials for CT in semiconductors. This work updates the overview of the above porous frameworks for CT, starting with their early history regarding their semiconductor applications, and lists CT concepts and selected key developments in their CT complexes and CT composites. In addition, the network formation methods and their functionalization are discussed to provide access to a variety of potential applications. Furthermore, several theoretical investigations, efficiency improvement techniques, and a discussion of the electrical conductivity of the porous frameworks are also highlighted. Finally, a perspective of synthetic porous framework studies on CT performance is provided along with some comparisons.

Covalent Organic Frameworks: Linkage Chemistry and Its Critical Role in The Evolution of π Electronic Structures and Functions

Covalent organic frameworks (COFs) provide a molecular platform for designing a novel class of functional materials with well-defined structures. A crucial structural parameter is the linkage, which dictates how knot and linker units are connected to form two-dimensional polymers and layer frameworks, shaping ordered π-array and porous architectures. However, the roles of linkage in the development of ordered π electronic structures and functions remain fundamental yet unresolved issues. Here we report the designed synthesis of COFs featuring four representative linkages: hydrazone, imine, azine, and C=C bonds, to elucidate their impacts on the evolution of π electronic structures and functions. Our observations revealed that the hydrazone linkage provides a non-conjugated connection, while imine and azine allow partial π conjugation, and the C=C bond permits full π-conjugation. Importantly, the linkage profoundly influences the control of π electronic structures and functions, unraveling its pivotal role in determining key electronic properties such as band gap, frontier energy levels, light absorption, luminescence, carrier density and mobility, and magnetic permeability. These findings highlight the significance of linkage chemistry in COFs and offer a general and transformative guidance for designing framework materials to achieve electronic functions.

2D Conjugated Polymer Thin Films for Organic Electronics: Opportunities and Challenges

2D conjugated polymers (2DCPs) possess extended in-plane π-conjugated lattice and out-of-plane π-π stacking, which results in enhanced electronic performance and potentially unique band structures. These properties, along with predesignability, well-defined channels, easy postmodification, and order structure attract extensive attention from material science to organic electronics. In this review, the recent advance in the interfacial synthesis and conductivity tuning strategies of 2DCP thin films, as well as their application in organic electronics is summarized. Furthermore, it is shown that, by combining topology structure design and targeted conductivity adjustment, researchers have fabricated 2DCP thin films with predesigned active groups, highly ordered structures, and enhanced conductivity. These films exhibit great potential for various thin-film organic electronics, such as organic transistors, memristors, electrochromism, chemiresistors, and photodetectors. Finally, the future research directions and perspectives of 2DCPs are discussed in terms of the interfacial synthetic design and structure engineering for the fabrication of fully conjugated 2DCP thin films, as well as the functional manipulation of conductivity to advance their applications in future organic electronics.

Conductive Covalent Organic Frameworks of Polymetallophthalocyanines as a Tunable Platform for Electrocatalysis

Developing an electrocatalyst platform that can control the interplay among activity, selectivity, and stability at atomic precision remains a grand challenge. Here, we have synthesized highly crystalline polymetallophthalocyanines (pMPcs, M = Fe, Co, Ni, and Cu) through the annulation of tetracyanobenzene in the presence of transition metals. The conjugated, conductive, and stable backbones with precisely installed metal sites render pMPcs a unique platform in electrochemical catalysis, where tunability emerges from long-range interactions. The construction of pCoNiPc with a Co and Ni dual-site integrates the advantageous features of pCoPc and pNiPc in electrocatalytic CO2 reduction through electronic communication of the dual-site with an unprecedented long atomic separation of ≥14 chemical bonds. This integration provides excellent activity (current density, j = -16.0 and -100 mA cm-2 in H-type and flow cell, respectively), selectivity (CO Faraday efficiency, FECO = 94%), and stability (>10 h), making it one of the best-performing reticular materials.

Photoresponse of CVD grown crystalline quantum dot-embedded covalent organic framework thin film

Covalent organic frameworks (COFs) are a new family of novel 2D materials which are highly sought after for integration into future sensors and other devices for their highly porous structures and large surface areas. However, low-temperature large-area growth of these semiconductive materials with a clean surface for direct device applications is still a challenging task. To provide an on-chip photonic device, a COF366-Quantum dot (COF366-QDs) thin-film-based device fabricated by in situ chemical vapor deposition (CVD) is presented. The high-resolution transmission electron microscopy (HRTEM) displays the formation of the periodic, crystalline and porous framework of the COF layer with mono-dispersed QDs of average particle size of ∼2.5-3 nm. The fabricated COF366-QD layer acts as a photoactive layer in the photonic device with an Au-COFQD-Au structure where a conduction path is formed between the metal electrodes through a network of COF layer with embedded QDs. The device shows photoactive response under 514 nm visible light with a very low dark current of 4.36 × 10-11 A with a minimum light detection capability of 160 nW and a responsivity of ∼3.42 A W-1. The photonic device was highly stable for successive switching cycles with very low attenuation. To our knowledge, this is the first report of a Quantum dot embedded COF366 thin-film by chemical vapor deposition. The proposed interfacing of COF366-QD thin-films on silicon substrate using in situ low-temperature CVD technique can be highly valuable for the development of transfer-free, clean, and low-cost preparation of industrial-scale organic electronics, optoelectronic device applications, and lab-on-chip based technologies for a wide range of future applications.

Preparation of Carborane-Tailored Covalent Organic Frameworks by a Postsynthetic Modification Strategy as a Barrier to Polysulfide in Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) have attracted much attention due to their high energy density and theoretical specific capacity. However, the "shuttle effect" of polysulfides limits their application. Herein, we propose a postsynthetic modification (PSM) strategy to synthesize a fibrous carborane-tailored covalent organic framework (PMCB-COF). Benefiting from its amphiphilicity, strong adsorption ability, high specific surface area, and accessible Li⁺ transport channels, PMCB-COF could serve as a barrier to polysulfide to inhibit the shuttle effect. The cell assembled with PMCB-COF exhibits a high initial capacity of 926 mAh g^-1 at 1 C. A Coulombic efficiency of 98% and a fading rate of only 0.039% per cycle are exhibited even after 1500 cycles. So far as we know, PMCB-COF is one of the best materials as a separator of LSBs. This work provides a safe and efficient avenue for tailoring COFs with carborane and might help promote the development of secure, low-cost, and durable rechargeable batteries.

A Semiconducting Two-Dimensional Polymer as an Organic Electrochemical Transistor Active Layer

Organic electrochemical transistors (OECTs) are devices with broad potential in bioelectronic sensing, circuits, and neuromorphic hardware. Their unique properties arise from the use of organic mixed ionic/electronic conductors (OMIECs) as the active channel. Typical OMIECs are linear polymers, where defined and controlled microstructure/morphology, and reliable characterization of transport and charging can be elusive. Semiconducting two-dimensional polymers (2DPs) present a new avenue in OMIEC materials development, enabling electronic transport along with precise control of well-defined channels ideal for ion transport/intercalation. To this end, a recently reported 2DP, TIIP, is synthesized and patterned at 10 µm resolution as the channel of a transistor. The TIIP films demonstrate textured microstructure and show semiconducting properties with accessible oxidation states. Operating in an aqueous electrolyte, the 2DP-OECT exhibits a device-scale hole mobility of 0.05 cm² V^-1 s^-1 and a µC* figure of merit of 1.75 F cm^-1 V^-1 s^-1 . 2DP OMIECs thus offer new synthetic degrees of freedom to control OECT performance and may enable additional opportunities such as ion selectivity or improved stability through reduced morphological modulation during device operation.

Outstanding Charge Mobility by Band Transport in Two-Dimensional Semiconducting Covalent Organic Frameworks

Two-dimensional covalent organic frameworks (2D COFs) represent a family of crystalline porous polymers with a long-range order and well-defined open nanochannels that hold great promise for electronics, catalysis, sensing, and energy storage. To date, the development of highly conductive 2D COFs has remained challenging due to the finite π-conjugation along the 2D lattice and charge localization at grain boundaries. Furthermore, the charge transport mechanism within the crystalline framework remains elusive. Here, time- and frequency-resolved terahertz spectroscopy reveals intrinsically Drude-type band transport of charge carriers in semiconducting 2D COF thin films condensed by 1,3,5-tris(4-aminophenyl)benzene (TPB) and 1,3,5-triformylbenzene (TFB). The TPB–TFB COF thin films demonstrate high photoconductivity with a long charge scattering time exceeding 70 fs at room temperature which resembles crystalline inorganic materials. This corresponds to a record charge carrier mobility of 165 ± 10 cm² V^–1 s^–1, vastly outperforming that of the state-of-the-art conductive COFs. These results reveal TPB–TFB COF thin films as promising candidates for organic electronics and catalysis and provide insights into the rational design of highly crystalline porous materials for efficient and long-range charge transport.

Atomistic insight into 2D COFs as antiviral agents against SARS-CoV-2

The recent pandemic of COVID-19 has raised global health concerns. Preventing severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) activity in the body is a very promising method to overcome the COVID-19 pandemic. One of the prevention methods is constraining the binding process among the human cell receptor-ACE2 and coronavirus spike protein. In the research done, the effect of deformation of the spike protein structure, due to the covalent organic frameworks (COFs), in reducing the interactions of ACE2 and the spike protein by the computational method was investigated. In this regard, atomic analysis of the interactions of ACE2 and the spike protein is provided using a molecular dynamics simulation. First, we investigated the interactions of the three different COFs, including COF-78, DAAQ-TFP, and COF-OEt, with the spike protein by analyzing the bond energies, as well as structural changes of the spike protein. Then, intermolecular interactions of the deformed spike protein along with ACE2 were assessed to clarify the protein's fusion after the deformation. As indicated by the results, although all introduced COFs deformed the spike protein in an effective way, COF-78 showed the best performance in the prevention of spike protein-ACE2 interactions by changing the molecular structure of the protein. Indeed, the interaction analysis of the deformed spike protein by COF-78 with the ACE2 showed that their interactions had the lowest absolute value of energy, along with the least amount of hydrogen bonds, in which the compaction of the protein was lower compared to the other deformed proteins. Moreover, having a high contact area with an aqueous media as well as severe fluctuations during the simulation time confirmed the positive performance of COF-78. In the current study, we aimed to introduce novel materials and COVID-19 prevention methodology that can be used in face masks and for surface disinfection.

Self-Assembly of a Bilayer 2D Supramolecular Organic Framework in Water

Accurate control of the layer number of orderly stacked 2D polymers has been an unsettled challenge in self-assembly. Herein we describe the fabrication of a bilayer 2D supramolecular organic framework from a monolayer 2D supramolecular organic framework in water by utilizing the cooperative coordination of a rod-like bipyridine ligands to zinc porphyrin subunits of the monolayer network. The monolayer supramolecular framework is prepared from the co-assembly of an octacationic zinc porphyrin monomer and cucurbit[8]uril (CB[8]) in water through CB[8]-encapsulation-promoted dimerization of 4-phenylpyridiunium subunits that the zinc porphyrin monomer bear. The bilayer 2D supramolecular organic framework exhibits structural regularity in both solution and the solid state, which is characterized by synchrotron small-angle X-ray scattering and high-resolution transmission electron microscopic techniques. Atomic force microscopic imaging confirms that the bilayer character of the 2D supramolecular organic framework can be realized selectively on the micrometer scale.

Ultra-fast single-crystal polymerization of large-sized covalent organic frameworks

In principle, polymerization tends to produce amorphous or poorly crystalline materials. Efficiently producing high-quality single crystals by polymerization in solvent remains as an unsolved issue in chemistry, especially for covalent organic frameworks (COFs) with highly complex structures. To produce μm-sized single crystals, the growth time is prolonged to >15 days, far away from the requirements in practical applications. Here, we find supercritical CO2 (sc-CO2) accelerates single-crystal polymerization by 10,000,000 folds, and produces two-dimensional (2D) COF single crystals with size up to 0.2 mm within 2~5 min. Although it is the fastest single-crystal polymerization, the growth in sc-CO2 leads to not only the largest crystal size of 2D COFs, but also higher quality with improved photoconductivity performance. This work overcomes traditional concept on low efficiency of single-crystal polymerization, and holds great promise for future applications owing to its efficiency, industrial compatibility, environmental friendliness and universality for different crystalline structures and linkage bonds.

Conductive Metallophthalocyanine Framework Films with High Carrier Mobility as Efficient Chemiresistors

The poor electrical conductivity of two-dimensional (2D) crystalline frameworks greatly limits their utilization in optoelectronics and sensor technology. Herein, we describe a conductive metallophthalocyanine-based NiPc-CoTAA framework with cobalt(II) tetraaza[14]annulene linkages. The high conjugation across the whole network combined with densely stacked metallophthalocyanine units endows this material with high electrical conductivity, which can be greatly enhanced by doping with iodine. The NiPc-CoTAA framework was also fabricated as thin films with different thicknesses from 100 to 1000 nm by the steam-assisted conversion method. These films enabled the detection of low-concentration gases and exhibited remarkable sensitivity and stability. This study indicates the enormous potential of metallophthalocyanine-based conductive frameworks in advanced stand-off chemical sensors and provides a general strategy through tailor-make molecular design to develop sensitive and stable chemical sensors for the detection of low-concentration gases.

Quantifying the Likelihood of Structural Models through a Dynamically Enhanced Powder X-Ray Diffraction Protocol

Structurally characterizing new materials is tremendously challenging, especially when single crystal structures are hardly available which is often the case for covalent organic frameworks. Yet, knowledge of the atomic structure is key to establish structure-function relations and enable functional material design. Herein, a new protocol is proposed to unambiguously predict the structure of poorly crystalline materials through a likelihood ordering based on the X-ray diffraction (XRD) pattern. Key of the procedure is the broad set of structures generated from a limited number of building blocks and topologies, which is submitted to operando structural characterization. The dynamic averaging in the latter accounts for the operando conditions and inherent temporal character of experimental measurements, yielding unparalleled agreement with experimental powder XRD patterns. The proposed concept can hence unquestionably identify the structure of experimentally synthesized materials, a crucial step to design next generation functional materials.

In-situ synthesized porphyrin polymer/TiO2 composites as high-performance Z-scheme photocatalysts for CO2 conversion

The promising photocatalytic conversion of CO₂ into valuable fuel promotes the development of photocatalyst through various methods. In this work, TiO₂ nanoparticle was composited with covalent porphyrin polymers (COP-Ps) to fabricate composite photocatalysts. The resultant COP-Ps/TiO₂ composites by in situ hydrothermal method exhibit much improved photocatalytic activity for the conversion of CO₂ into CO relative to two components, and it is attributable to improved charge transfer between two moieties led by strong interaction. Especially, TiO₂ is composited more evenly with the sulfonated hollow COP-P (sh-COP-P). The resultant composite sh-COP-P/TiO₂ performs best with a CO production rate of 5.70 μmol·g^-1·h^-1, which is approximately 20.4 times as high as that of pure TiO₂ and 2.3 times of sh-COP-P polymer. For comparison, the simple physical mixture of sh-COP-P and TiO₂ (sm-sh-COP-P/TiO₂) was fabricated, and it performs more badly due to poor mixing uniformity. A Z-scheme photocatalytic mechanism was proposed for sh-COP-P/TiO₂ composite on the basis of energy band analysis and hydroxyl radical test. This study provides a new in situ strategy to fabricate organic polymer/metal oxide composites of high photocatalytic activity for CO₂ reduction.

Two-Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device

Despite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin-film through solvothermal method and on-solid-surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin-film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin-film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two-dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF-PP or 2D BECOF-PN) by employing a surfactant-monolayer-assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF-PP is featured as free-standing thin film with large single-crystalline domains up to ≈60 μm² and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF-PP film on silicon nanowire-based field-effect transistor is demonstrated as a bio-inspired system to mimic neuronal synapses, displaying a learning-erasing-forgetting memory process.

Covalent Organic Frameworks: Chemical Approaches to Designer Structures and Built-In Functions

A new approach has been developed to design organic polymers using topology diagrams. This strategy enables covalent integration of organic units into ordered topologies and creates a new polymer form, that is, covalent organic frameworks. This is a breakthrough in chemistry because it sets a molecular platform for synthesizing polymers with predesignable primary and high-order structures, which has been a central aim for over a century but unattainable with traditional design principles. This new field has its own features that are distinct from conventional polymers. This Review summarizes the fundamentals as well as major progress by focusing on the chemistry used to design structures, including the principles, synthetic strategies, and control methods. We scrutinize built-in functions that are specific to the structures by revealing various interplays and mechanisms involved in the expression of function. We propose major fundamental issues to be addressed in chemistry as well as future directions from physics, materials, and application perspectives.

Two-Dimensional Covalent Organic Framework-Graphene Photodetectors: Insight into the Relationship between the Microscopic Interfacial Structure and Performance

Graphene is an attractive material for photodetection and optoelectronic applications because it offers a broad spectral bandwidth and ultrafast response speed. However, because of the broad light absorption characteristic, graphene has a lack of selectivity to the wavelength, which limits the performance of graphene-based photodetectors. Here, we demonstrate a novel hybrid photodetector with monolayer graphene covered with an ultrathin film of surface covalent organic frameworks (COFs) with variable structures as the light-harvesting materials. Photodetectors based on surface COF-G show enhanced responsivity in comparison with unmodified graphene and graphene modified with monomers. The submolecular resolution of scanning tunneling microscopy allows us to get a direct insight into the relationship between the microscopic interfacial structure and the performance of the device. We prove that the enhancement in the device performance is directly related with the orderliness of surface COFs, which influences the interfacial charge transfer by tuning π-π stacking between surface COF and graphene.

Isostructural Three-Dimensional Covalent Organic Frameworks

Herein, we reported the designed synthesis of three isostructural three-dimensional covalent organic frameworks (3D COFs) with -H, -Me, or -F substituents, which have similar crystallinity and topology. Their crystal structures were determined by continuous rotation electron diffraction (cRED), and all three 3D COFs were found to adopt a fivefold interpenetrated pts topology. More importantly, the resolution of these cRED datasets reached up to 0.9-1.0 Å, enabling the localization of all non-hydrogen atomic positions in a COF framework directly by 3D ED techniques for the first time. In addition, the precise control of the pore environments through the use of different functional groups led to different selectivities for CO₂ over N₂ . We have thus confirmed that polycrystalline COFs can be definitely studied to the atomic level as other materials, and this study should also inspire the design and synthesis of 3D COFs with tailored pore environments for interesting applications.

Postsynthetic Functionalization of Zr4+-Immobilized Core-Shell Structured Magnetic Covalent Organic Frameworks for Selective Enrichment of Phosphopeptides

Chemical modification of covalent organic frameworks (COFs) is indispensable for integrating functionalities of greater complexity and accessing advanced COF materials suitable for more potential applications. Reported here is a novel strategy for fabricating controllable core-shell structured Zr⁴⁺-immobilized magnetic COFs (MCNC@COF@Zr⁴⁺) composed of a high-magnetic-response magnetic colloid nanocrystal cluster (MCNC) core, Zr⁴⁺ ion-functionalized two-dimensional COFs as the shell by sequential postsynthetic functionalization and, for the first time, the application of the MCNC@COF@Zr⁴⁺ composites for efficient and selective enrichment of phosphopeptides. The as-prepared MCNC@COF@Zr⁴⁺ composites possess regular porosity with large surface areas, high Zr⁴⁺ loading amount, strong magnetic responsiveness, and good thermal/chemical stability, which can serve as an ideal adsorbent for selective enrichment of phosphopeptides and simultaneous size exclusion of biomacromolecules, such as proteins. The high detection sensitivity (10 fmol) together with the excellent recovery of phosphopeptides is also obtained. These outstanding features suggest that the MCNC@COF@Zr⁴⁺ composites are of great benefit for pretreatment prior to mass spectrometry analysis of phosphopeptides. In addition, the performance of the developed approach in selective enrichment of phosphopeptides from the tryptic digests of defatted milk and directly specific capture of endogenous phosphopeptides from human serum gives powerful proof for its high selectivity and effectiveness in identifying the low-abundance phosphopeptides from complicated biological samples. This study not only provides a strategy for versatile functionalization of magnetic COFs but also opens a new avenue in their use in phosphoproteome analysis.

Facile Fabrication of Nanoscale Porphyrinic Covalent Organic Polymers for Combined Photodynamic and Photothermal Cancer Therapy

Photodynamic therapy (PDT) of cancers is usually inefficient due to the relatively low level of oxygen in cancer cells; therefore, it needs to combine with other treatment strategies such as chemotherapy or photothermal therapy (PTT) to achieve the best anticancer efficacy. Although porphyrin-containing materials have been widely studied for PDT, the photothermal effect is rarely reported. Herein, nanoscale porphyrin-containing covalent organic polymers (PCOPs) were produced via a room temperature solution-based aging method. The resulting nanoparticles possess high photothermal conversion efficiency (21.7%) and excellent photodynamic effect. For the first time, the in vitro and in vivo tests indicated an enhanced antitumor efficacy for PCOP with combined PDT and PTT. This study provides an efficient approach to fabricate nanoCOP and also demonstrates the great potential of porphyrin-containing COP for biomedical applications.

2D-porphrinic covalent organic framework-based aptasensor with enhanced photoelectrochemical response for the detection of C-reactive protein

In this study, a novel photoelectrochemical (PEC) aptasensor based on two-dimensional (2D) porphyrinic covalent organic frameworks (p-COFs) for the label-free detection of C-reactive protein (CRP) is presented. The obtained p-COFs possess high conductivity and an improved stability due to strong and rigid covalent linkages. The introduction of p-COFs hinder the recombination of electrons and holes, decreasing their band gap (E_g), thereby which improved the photocurrent conversion efficiency. Compared with pure porphyrin, p-COFs exhibited enhanced photocurrent intensity. An amplified photocurrent conversion efficiency and enhanced photocurrent results from H₂O₂, which act as active molecules and electron donors. As an unprecedented application of COFs in PEC bioanalysis, the detection of CRP with a PEC aptasensor is presented. The assembly of a CRP aptamer on the surface of Ag nanoparticles hinders the electron transfer, resulting in the decrease of the photocurrent response. This PEC aptasensor exhibits good analytical performances such as a rapid response, high stability, wide linear range and excellent selectivity, making COFs promising candidates for PEC bioanalysis.

Rational design of functionalized covalent organic frameworks and their performance towards CO2 capture

We describe the design and synthesis of two new functionalized covalent organic frameworks, named Cz-COF and Tz-COF, by using monomers containing carbazole and benzobisthiazole as building blocks. The resultant materials possess high crystallinity, permanent porosities as well as abundant heteroatom activated sites in the framework. As solid adsorbents, both COFs exhibit excellent CO₂ uptake (11.0 wt% for Cz-COF and 15.4 wt% for Tz-COF), high adsorption selectivity for CO₂ over N₂ and good recyclability.

Two new functionalized covalent organic frameworks containing carbazole and benzothiazole displayed excellent CO₂ uptake.

Reaction of porphyrin-based surface-anchored metal-organic frameworks caused by prolonged illumination

Crystalline surface-anchored metal-organic framework (SURMOF) thin films made from porphyrin-based organic linkers have recently been used in both photon upconversion and photovoltaic applications. While these studies showed promising results, the question of photostability in this organic-inorganic hybrid material has to be investigated before applications can be considered. Here, we combine steady-state photoluminescence, transient absorption, and time-resolved electron paramagnetic resonance spectroscopy to examine the effects of prolonged illumination on a palladium-porphyrin based SURMOF thin film. We find that phototreatment leads to a change in the material's photoresponse caused by the creation of stable products of photodecomposition - likely chlorin - inside the SURMOF structure. When the mobile triplet excitons encounter such a defect site, a short-lived (80 ns) cation-anion radical pair can be formed by electron transfer, wherein the charges are localized at a porphyrin and the photoproduct site, respectively.