Deoxygenation of Biomass-Derived Feedstocks: Oxorhenium-Catalyzed Deoxydehydration of Sugars and Sugar Alcohols

First Evidence of the Double-Bond Formation by Deoxydehydration of Glycerol and 1,2-Propanediol in Ionic Liquids

Deoxydehydration (DODH) reaction of glycerol (GL) and 1,2-propanediol (1,2-PD), in ionic liquids (ILs), catalyzed by methyltrioxorhenium (MTO) and Re₂O₇, was studied in detail. To better understand the ability of ILs to improve the catalytic performance of the rhenium catalyst, several experiments, employing eight different cations and two different anions, were carried out. Among the anions, bis(trifluoromethylsulfonyl)imide (TFSI) appears to be more appropriate than PF₆ ^-, for its relatively lower volatility of the resulting IL. Regarding the choice of the most appropriate cation, the presence of a single aromatic ring seems to be a necessary requirement for a satisfying and convenient reactivity. With the aim to extend the recyclability of the catalyst, experiments involving the readdition of polyol to the terminal reaction mixture were carried out. Worthy of interest is the fact that the presence of the IL prevents the inertization process of the catalyst, allowing us to obtain the alkene also after a readdition of fresh polyol.

Deoxydehydration of Biomass-Derived Polyols Over Silver-Modified Ceria-Supported Rhenium Catalyst with Molecular Hydrogen

Olefin production from polyols via deoxydehydration (DODH) was carried out over Ag-modified CeO₂ -supported heterogeneous Re catalysts with H₂ as a reducing agent. Both high DODH activity and low hydrogenation ability for C=C bonds were observed in the reaction of erythritol, giving a 1,3-butadiene yield of up to 90 % under "solvent-free" conditions. This catalyst is applicable to other substrates such as methyl glycosides (methyl α-fucopyranoside: 91 % yield of DODH product; methyl β-ribofuranoside: 88 % yield), which were difficult to be converted to the DODH products over the DODH catalysts reported previously. ReO_x -Ag/CeO₂ was reused 3 times without a decrease of activity or selectivity after calcination as regeneration. Although the transmission electron microscopy energy-dispersive X-ray spectroscopy and X-ray absorption fine structure analyses showed that Re species were highly dispersed and Ag was present as metal particles with various sizes from well-dispersed species (<1 nm) to around 5 nm particles, the catalysts prepared from size-controlled Ag nanoparticles showed similar performance, indicating that the catalytic performance is insensitive to the Ag particle size.

Perspectives for the Upgrading of Bio-Based Vicinal Diols within the Developing European Bioeconomy

The previous decade has witnessed a drastic increase of European incentives aimed at pushing forward the transition from an exclusively petro-based economy toward a strong and homogeneous bio-based economy. Since 2012, numerous programs have been developed to stimulate and promote research and innovation relying on sustainable and renewable resources. Terrestrial biomass is a virtually infinite reservoir of biomacromolecules, the biorefining of which provides platform molecules of low complexity yet with tremendous industrial potential. Among such bio-based platform molecules, polyols and, more specifically, molecules featuring vicinal diols have gained tremendous interest and have stimulated an increasing research effort from the chemistry and chemical engineering communities. This Review revolves around the most promising process conditions and technologies reported since 2012 that specifically target bio-based vicinal diols and promote their transformation into value-added molecules of wide industrial interest, such as olefins, epoxides, cyclic carbonates, and ketals.

Bifunctional Polyene Cyclizations: Synthetic Studies on Pimarane Natural Products

Polyene cyclizations generate molecular complexity from a linear polyene in a single step. While methods to initiate these cyclizations have been continuously expanded and improved over the years, the majority of polyene substrates are still limited to simple alkyl-substituted alkenes. In this study, we took advantage of the unique reactivity of higher-functionalized bifunctional alkenes. The realization of a polyene tetracyclization of a dual nucleophilic aryl enol ether involving a transannular endo-termination step enabled the total synthesis of the tricyclic diterpenoid pimara-15-en-3α-8α-diol. The highly flexible and modular route allowed for the preparation of a diverse library of cyclization precursors specifically designed for the total synthesis of the tetracyclic nor-diterpenoid norflickinflimiod C. The tetracyclization of three diversely substituted allenes enabled access to complex pentacyclic products and provided a detailed insight into the underlying reaction pathways.

Product Control and Insight into Conversion of C6 Aldose Toward C2, C4 and C6 Alditols in One-Pot Retro-Aldol Condensation and Hydrogenation Processes

Alcohols have a wide range of applicability, and their functions vary with the carbon numbers. C6 and C4 alditols are alternative of sweetener, as well as significant pharmaceutical and chemical intermediates, which are mainly obtained through the fermentation of microorganism currently. Similarly, as a bulk chemical, C2 alditol plays a decisive role in chemical synthesis. However, among them, few works have been focused on the chemical production of C4 alditol yet due to its difficult accumulation. In this paper, under a static and semi-flowing procedure, we have achieved the product control during the conversion of C6 aldose toward C6 alditol, C4 alditol and C2 alditol, respectively. About C4 alditol yield of 20 % and C4 plus C6 alditols yield of 60 % are acquired in the one-pot conversion via a cascade retro-aldol condensation and hydrogenation process. Furthermore, in the semi-flowing condition, the yield of ethylene glycol is up to 73 % thanks to its low instantaneous concentration.

Direct Deoxydehydration of Cyclic trans-Diol Substrates: An Experimental and Computational Study of the Reaction Mechanism of Vanadium(V)-based Catalysis*

The deoxydehydration of carbohydrates represents a key target to leverage renewable biomass resources chemically. Using a vanadium(V)-based catalyst, it was possible to directly deoxydehydrate cyclic trans-diol substrates. Accompanying mechanistic characterisation of this process by density functional calculations pointed to an energetically tractable route for deoxydehydration of cyclic trans-diol substrates involving stepwise cleavage of the diol C-O bonds via the triplet state; experimentally, this was supported by light dependence of the reaction. Calculations also indicated that cyclic cis-diols and a linear diol substrate could additionally proceed by a concerted singlet DODH mechanism. This work potentially opens a new and cost-effective way to efficiently convert carbohydrates of trans-diol stereochemistry into alkenes.

Efficient Catalysts for the Green Synthesis of Adipic Acid from Biomass

Green synthesis of adipic acid from renewable biomass is a very attractive goal of sustainable chemistry. Herein, we report efficient catalysts for a two-step transformation of cellulose-derived glucose into adipic acid via glucaric acid. Carbon nanotube-supported platinum nanoparticles are found to work efficiently for the oxidation of glucose to glucaric acid. An activated carbon-supported bifunctional catalyst composed of rhenium oxide and palladium is discovered to be powerful for the removal of four hydroxyl groups in glucaric acid, affording adipic acid with a 99 % yield. Rhenium oxide functions for the deoxygenation but is less efficient for four hydroxyl group removal. The co-presence of palladium not only catalyzes the hydrogenation of olefin intermediates but also synergistically facilitates the deoxygenation. This work presents a green route for adipic acid synthesis and offers a bifunctional-catalysis strategy for efficient deoxygenation.

Selective Hydrogenolysis of Erythritol over Ir-ReOx /Rutile-TiO2 Catalyst

Partial hydrogenolysis of erythritol, which can be produced at large scale by fermentation, to 1,4-butanediol (1,4-BuD) is investigated with Ir-ReO_x /SiO₂ and Ir-ReO_x /rutile-TiO₂ catalysts. In addition to the higher conversion rate over Ir-ReO_x /TiO₂ than over Ir-ReO_x /SiO₂ , which has been also reported for glycerol hydrogenolysis, Ir-ReO_x /TiO₂ showed higher selectivity to 1,4-BuD than Ir-ReO_x /SiO₂ , especially at low conversion levels, leading to high 1,4-BuD productivity of 20 mmol_1,4-BuD  g_Ir ^-1  h^-1 at 373 K (36 % conversion, 33 % selectivity). The productivity based on the noble metal amount is higher than those reported previously, although the maximum yield of 1,4-BuD (23 %) is not higher than the highest reported values. The reactions of various triols, diols and mono-ols are tested and the selectivity and the reaction rates are compared between catalysts and between substrates. The Ir-ReO_x /TiO₂ catalyst showed about twofold higher activity than Ir-ReO_x /SiO₂ in hydrogenolysis of the C-OH bond at the 2- or 3-positions in 1,2- and 1,3-diols, respectively, whereas the hydrogenolysis of C-OH at the 1-position is less promoted by the TiO₂ support. Lowering the loading amount of Ir on TiO₂ (from 4 wt % to 2 or 1 wt %) decreases the Ir-based activity and 1,4-BuD selectivity. Similarly, increasing the loading amount on SiO₂ from 4 wt % to 20 wt % increases the Ir-based activity and 1,4-BuD selectivity, although they remain lower than those for TiO₂ -supported catalyst with 4 wt % Ir. High metal loadings on the support seem to be important.

Molybdenum-Catalyzed Deoxygenation Coupling of Lignin-Derived Alcohols for Functionalized Bibenzyl Chemicals

With the growing demand for sustainability and reducing CO₂ footprint, lignocellulosic biomass has attracted much attention as a renewable, carbon-neutral and low-cost feedstock for the production of chemicals and fuels. To realize efficient utilization of biomass resource, it is essential to selectively alter the high degree of oxygen functionality of biomass-derivates. Herein, we introduced a novel procedure to transform renewable lignin-derived alcohols to various functionalized bibenzyl chemicals. This strategy relied on a short deoxygenation coupling pathway with economical molybdenum catalyst. A well-designed H-donor experiment was performed to investigate the mechanism of this Mo-catalyzed process. It was proven that benzyl carbon-radical was the most possible intermediate to form the bibenzyl products. It was also discovered that the para methoxy and phenolic hydroxyl groups could stabilize the corresponding radical intermediates and then facilitate to selectively obtain bibenzyl products. Our research provides a promising application to produce functionalized aromatics from biomass-derived materials.

H2 -Free Re-Based Catalytic Dehydroxylation of Aldaric Acid to Muconic and Adipic Acid Esters

As one of the most demanded dicarboxylic acids, adipic acid can be directly produced from renewable sources. Hexoses from (hemi)cellulose are oxidized to aldaric acids and subsequently catalytically dehydroxylated. Hitherto performed homogeneously, we present the first heterogeneous catalytic process for converting an aldaric acid into muconic and adipic acid. The contribution of leached Re from the solid pre-reduced catalyst was also investigated with hot-filtration test and found to be inactive for dehydroxylation. Corrosive or hazardous (HBr/H2 ) reagents are avoided and simple alcohols and solid Re/C catalysts in an inert atmosphere are used. At 120 °C, the carboxylic groups are protected by esterification, which prevents lactonization in the absence of water or acidic sites. Dehydroxylation and partial hydrogenation yield monohexenoates (93 %). For complete hydrogenation to adipate, a 16 % higher activation barrier necessitates higher temperatures.

N,N,O-Coordinated tricarbonylrhenium precatalysts for the aerobic deoxydehydration of diols and polyols

The bench-top stable and synthetically easily accessible, low-valent NNO–rhenium complex L⁴Re(CO)₃ provides an alternative to high-valent rhenium catalysts in DODH chemistry.

Preparation of Highly Active Monometallic Rhenium Catalysts for Selective Synthesis of 1,4-Butanediol from 1,4-Anhydroerythritol

1,4-Butanediol can be produced from 1,4-anhydroerythritol through the co-catalysis of monometallic mixed catalysts (ReO_x /CeO₂ +ReO_x /C) in the one-pot reduction with H₂ . The highest yield of 1,4-butanediol was over 80 %, which is similar to the value obtained over ReO_x -Au/CeO₂ +ReO_x /C catalysts. Mixed catalysts of CeO₂ +ReO_x /C showed almost the same performance, giving 89 % yield of 1,4-butanediol. The reactivity trends of possible intermediates suggest that the reaction mechanism over ReO_x /CeO₂ +ReO_x /C is similar to that over ReO_x -Au/CeO₂ +ReO_x /C: deoxydehydration (DODH) of 1,4-anhydroerythritol to 2,5-dihydrofuran over ReO_x species on the CeO₂ support with the promotion of H₂ activation by ReO_x /C, isomerization of 2,5-dihydrofuran to 2,3-dihydrofuran catalyzed by ReO_x on the C support, hydration of 2,3-dihydrofuran catalyzed by C, and hydrogenation to 1,4-butanediol catalyzed by ReO_x /C. The reaction order of conversion of 1,4-anhydroerythritol with respect to H₂ pressure is almost zero and this indicates that the rate-determining step is the formation of 2,5-dihydrofuran from the coordinated substrate with reduced Re in the DODH step. The activity of ReO_x /CeO₂ +ReO_x /C is higher than that of ReO_x -Au/CeO₂ +ReO_x /C, which is probably related to the reducibility of ReO_x /C and the mobility of the Re species between the supports. High-valent Re species such as Re⁷⁺ on the CeO₂ and C supports are mobile in the solvent; however, low-valent Re species, including metallic Re species, have much lower mobility. Metallic Re and cationic low-valent Re species with high reducibility and low mobility can be present on the carbon support as a trigger for H₂ activation and promoter of the reduction of Re species on CeO₂ . The presence of noble metals such as Au can enhance the reducibility through the activation of H₂ molecules on the noble metal and the formation of spilt-over hydrogen over noble metal/CeO₂ , as indicated by H₂ temperature-programmed reduction. The higher reducibility of ReO_x -Au/CeO₂ lowers the DODH activity of ReO_x -Au/CeO₂ +ReO_x /C in comparison with ReO_x /CeO₂ +ReO_x /C by restricting the movement of Re species from C to CeO₂ .

A Cptt-Based Trioxo-Rhenium Catalyst for the Deoxydehydration of Diols and Polyols

Trioxo-rhenium complexes are well known catalysts for the deoxydehydration (DODH) of vicinal diols (glycols). In this work, we report on the DODH of diols and biomass-derived polyols using CpttReO3 as a new catalyst (Cptt=1,3-di-tert-butylcyclopentadienyl). The DODH reaction was optimized using 2 mol % of CpttReO3 and 3-octanol as both reductant and solvent. The CpttReO3 catalyst exhibits an excellent activity for biomass-derived polyols. Specifically, glycerol is almost quantitatively converted to allyl alcohol and mucic acid gives 75 % of muconates at 91 % conversion. In addition, the loading of CpttReO3 can be reduced to 0.1 mol % to achieve a turn-over number as high as 900 per Re when using glycerol as substrate. Examination of DODH reaction profiles by NMR spectroscopy indicates that catalysis is related to Cp-ligand release, which raises questions on the nature of the actual catalyst.

Selective Cleavage of C-O Bonds in Lignin Catalyzed by Rhenium(VII) Oxide (Re2 O7 )

The selective cleavage of C-O bonds in typical model lignin β-O-4 compounds and deconstruction of a realistic lignin feedstock catalyzed by Re₂ O₇ is described. High yields of C-O cleavage products (up to 97.8 %) from model compounds and oils (76.3 %) from organosolv pinewood lignin were obtained under mild conditions. Evidence for the pathway of this catalytic process is also provided.

Production of Plant Phthalate and its Hydrogenated Derivative from Bio-Based Platform Chemicals

Direct transformation of bio-based platform chemicals into aromatic dicarboxylic acids and their derivatives, which are widely used for the manufacture of polymers, is of significant importance for the sustainable development of the plastics industry. However, limited successful chemical processes have been reported. This study concerns a sustainable route for the production of phthalate and its hydrogenated derivative from bio-based malic acid and erythritol. The key Diels-Alder reaction is applied to build a substituted cyclohexene structure. The dehydration reaction of malic acid affords fumaric acid with 96.6 % yield, which could be used as the dienophile, and 1,3-butadiene generated in situ through erythritol deoxydehydration serves as the diene. Starting from erythritol and dibutyl fumarate, a 74.3 % yield of dibutyl trans-4-cyclohexene-1,2-dicarboxylate is obtained. The palladium-catalyzed dehydrogenation of the cycloadduct gives a 77.8 % yield of dibutyl phthalate. Dibutyl trans-cyclohexane-1,2-dicarboxylate could be formed in nearly 100 % yield under mild conditions by hydrogenation of the cycloadduct. Furthermore, fumaric acid and fumarate, with trans configurations, were found to be better dienophiles for this Diels-Alder reaction than maleic acid and maleate, with cis configuration, based on the experimental and computational results. This new route will pave the way for the production of environmental friendly plastic materials from plants.

Photocatalytic Transfer Hydrogenolysis of Allylic Alcohols on Pd/TiO2 : A Shortcut to (S)-(+)-Lavandulol

We report herein a regio- and stereoselective photocatalytic hydrogenolysis of allylic alcohols to form unsaturated hydrocarbons employing a palladium(II)-loaded titanium oxide; the reaction proceeds at room temperature under light irradiation without stoichiometric generation of salt wastes. Olefin and saturated alcohol moieties tolerated the reaction conditions. Hydrogen atoms were selectively incorporated into less sterically congested carbons of the allylic functionalities. This protocol allowed a short-step synthesis of (S)-(+)-lavandulol from (R)-(-)-carvone by avoiding otherwise necessary protection/deprotection steps.

Supported Molybdenum Catalysts for the Deoxydehydration of 1,4-Anhydroerythritol into 2,5-Dihydrofuran

Efficient deoxygenation strategies are crucial for the valorization of renewable feedstocks. Deoxydehydration (DODH) enables the direct transformation of two adjacent hydroxyl groups into a double bond. Supported molybdenum-based catalysts were utilized for the first time in DODH. MoO_x /TiO₂ showed superior catalytic activity compared to common molybdenum salts. The catalyst efficiently converted 1,4-anhydroerythritol into 2,5-dihydrofuran in the presence of 3-octanol as reducing agent, showing high reproducibility and stability.

Highly Selective Deoxydehydration of Tartaric Acid over Supported and Unsupported Rhenium Catalysts with Modified Acidities

The deoxydehydration (DODH) of sugar acids to industrially important carboxylic acids is a very attractive topic. Oxorhenium complexes are the most-often employed DODH catalysts. Because of the acidity of the rhenium catalysts, the DODH products of sugar acids were usually in the form of mixture of free carboxylic acids and esters. Herein, we demonstrate strategies for the selective DODH of sugar acids to free carboxylic acids by tuning the Lewis acidity or the Brønsted acidity of the rhenium-based catalysts. Starting from tartaric acid, up to 97 % yield of free maleic acid was achieved. Based on our strategies, functional polymer immobilized heterogeneous rhenium catalysts were also developed for the selective DODH conversion of sugar acids.

Synthesis of 2-Butanol by Selective Hydrogenolysis of 1,4-Anhydroerythritol over Molybdenum Oxide-Modified Rhodium-Supported Silica

Rh-MoOx /SiO2 (Mo/Rh=0.13) is an effective catalyst for the hydrogenolysis of 1,4-anhydroerythritol (1,4-AHERY) and provides 2-BuOH in high yield of 51 %. This is the first report of the production of 2-BuOH from 1,4-AHERY by hydrogenolysis. 1,4-AHERY was more suitable as a starting material than erythritol because the 2-BuOH yield from erythritol was low (34 %). Based on the kinetics and comparison of reactivities of the related compounds using Rh-MoOx /SiO2 and Rh/SiO2 catalysts, the modification of Rh/SiO2 with MoOx leads to the high activity and high selectivity to 2-BuOH because of the generation of reactive hydride species and the strong adsorption of 1,4-AHERY on MoOx species. The reaction proceeds by main two routes, (I) the combination of single C-O hydrogenolysis with the desorption of intermediates, a usual route in hydrogenolysis, and (II) multiple C-O hydrogenolysis without the desorption of intermediates from the active site, and the reaction mechanism for Route (II) is proposed.

Catalytic total hydrodeoxygenation of biomass-derived polyfunctionalized substrates to alkanes

The total hydrodeoxygenation of carbohydrate-derived molecules to alkanes, a key reaction in the production of biofuel, was reviewed from the aspect of catalysis. Noble metals (or Ni) and acid are the main components of the catalysts, and group 6 or 7 metals such as Re are sometimes added as modifiers of the noble metal. The main reaction route is acid-catalyzed dehydration plus metal-catalyzed hydrogenation, and in some systems metal-catalyzed direct CO dissociation is involved. The appropriate active metal, acid strength, and reaction conditions depend strongly on the reactivity of the substrate. Reactions that use Pt or Pd catalysts supported on Nb-based acids or relatively weak acids are suitable for furanic substrates. Carbohydrates themselves and sugar alcohols undergo CC dissociation easily. The systems that use metal-catalyzed direct CO dissociations can give a higher yield of the corresponding alkane from carbohydrates and sugar alcohols.

Rhenium-catalyzed deoxydehydration of diols and polyols

The substitution of platform chemicals of fossil origin by biomass-derived analogues requires the development of chemical transformations capable of reducing the very high oxygen content of biomass. One such reaction, which has received increasing attention within the past five years, is the rhenium-catalyzed deoxydehydration (DODH) of a vicinal diol into an alkene; this is a model system for abundant polyols like glycerol and sugar alcohols. The present contribution includes a review of early investigations of stoichiometric reactions involving rhenium, diols, and alkenes followed by a discussion of the various catalytic systems that have been developed with emphasis on the nature of the reductant, the substrate scope, and mechanistic investigations.

Vitamin B1-catalyzed acetoin formation from acetaldehyde: a key step for upgrading bioethanol to bulk C₄ chemicals

The production of bulk chemicals and fuels from renewable biobased feedstocks is of significant importance for the sustainability of human society. The production of ethanol from biomass has dramatically increased and bioethanol also holds considerable potential as a versatile building block for the chemical industry. Herein, we report a highly selective process for the conversion of ethanol to C4 bulk chemicals, such as 2,3-butanediol and butene, via a vitamin B1 (thiamine)-derived N-heterocyclic carbene (NHC)-catalyzed acetoin condensation as the key step to assemble two C2 acetaldehydes into a C4 product. The environmentally benign and cheap natural catalyst vitamin B1 demonstrates high selectivity (99%), high efficiency (97% yield), and high tolerance toward ethanol and water impurities in the acetoin reaction. The results enable a novel and efficient process for ethanol upgrading.

Selective hydrodeoxygenation of cyclic vicinal diols to cyclic alcohols over tungsten oxide-palladium catalysts

Hydrodeoxygenation of cyclic vicinal diols such as 1,4-anhydroerythritol was conducted over catalysts containing both a noble metal and a group 5-7 transition-metal oxide. The combination of Pd and WOx allowed the removal of one of the two OH groups selectively. 3-Hydroxytetrahydrofuran was obtained from 1,4-anhydroerythritol in 72 and 74% yield over WOx -Pd/C and WOx -Pd/ZrO2 , respectively. The WOx -Pd/ZrO2 catalyst was reusable without significant loss of activity if the catalyst was calcined as a method of regeneration. Characterization of WOx -Pd/C with temperature-programmed reduction, X-ray diffraction, and transmission electron microscopy/energy-dispersive X-ray spectroscopy suggested that Pd metal particles approximately 9 nm in size were formed on amorphous tungsten oxide particles. A reaction mechanism was proposed on the basis of kinetics, reaction results with tungsten oxides under an atmosphere of Ar, and density functional theory calculations. A tetravalent tungsten center (W(IV) ) was formed by reduction of WO3 with the Pd catalyst and H2 , and this center served as the reductant for partial hydrodeoxygenation.