Engineering Non-sintered, Metal-Terminated Tungsten Carbide Nanoparticles for Catalysis

η-Carbides (Co, Mo, or W) Nanoparticles from Octacyanometalates Precursors-Based Network

This paper describes a simple, two-steps chemical pathway to obtain bimetallic carbide nanoparticles (NPs) of general formula MxM″yC, also called η-carbides. This process allows for a control of the chemical composition of metals present in the carbides (M = Co and M″ = Mo or W). The first step involves the synthesis of a precursor consisting of a network of octacyanometalates. The second step consists in a thermal degradation of the previously obtained octacyanometalates networks under neutral atmosphere (Ar or N2 ). It is shown that this process results in the formation of carbide NPs with diameter of ≈ 5nm, and the stoichiometries Co3 M'3 C, Co6 M'6 C, Co2 M'4 C for the CsCoM' systems.

Recent Advances in Carbon Dioxide Adsorption, Activation and Hydrogenation to Methanol using Transition Metal Carbides

The inevitable emission of carbon dioxide (CO₂ ) due to the burning of a substantial amount of fossil fuels has led to serious energy and environmental challenges. Metal-based catalytic CO₂ transformations into commodity chemicals are a favorable approach in the CO₂ mitigation strategy. Among these transformations, selective hydrogenation of CO₂ to methanol is the most promising process that not only fulfils the energy demands but also re-balances the carbon cycle. The investigation of CO₂ adsorption on the surface of heterogeneous catalyst is highly important because the formation of various intermediates which determines the selectivity of product. Transition metal carbides (TMCs) have received considerable attention in recent years because of their noble metal-like reactivity, ceramic-like properties, high chemical and thermal stability. These features make them excellent catalytic materials for a variety of transformations such as CO₂ adsorption and its conversion into value-added chemicals. Herein, the catalytic properties of TMCs are summarize along with synthetic methods, CO₂ binding modes, mechanistic studies, effects of dopant on CO₂ adsorption, and carbon/metal ratio in the CO₂ hydrogenation reaction to methanol using computational as well as experimental studies. Additionally, this Review provides an outline of the challenges and opportunities for the development of potential TMCs in CO₂ hydrogenation reactions.

Recent advances in activating surface reconstruction for the high-efficiency oxygen evolution reaction

A climax in the development of cost-effective and high-efficiency transition metal-based electrocatalysts has been witnessed recently for sustainable energy and related conversion technologies. In this regard, structure-activity relationships based on several descriptors have already been proposed to rationally design electrocatalysts. However, the dynamic reconstruction of the surface structures and compositions of catalysts during electrocatalytic water oxidation, especially during the anodic oxygen evolution reaction (OER), complicate the streamlined prediction of the catalytic activity. With the achievements in operando and in situ techniques, it has been found that electrocatalysts undergo surface reconstruction to form the actual active species in situ accompanied with an increase in their oxidation state during OER in alkaline solution. Accordingly, a thorough understanding of the surface reconstruction process plays a critical role in establishing unambiguous structure-composition-property relationships in pursuit of high-efficiency electrocatalysts. However, several issues still need to be explored before high electrocatalytic activities can be realized, as follows: (1) the identification of initiators and pathways for surface reconstruction, (2) establishing the relationships between structure, composition, and electrocatalytic activity, and (3) the rational manipulation of in situ catalyst surface reconstruction. In this review, the recent progress in the surface reconstruction of transition metal-based OER catalysts including oxides, non-oxides, hydroxides and alloys is summarized, emphasizing the fundamental understanding of reconstruction behavior from the original precatalysts to the actual catalysts based on operando analysis and theoretical calculations. The state-of-the-art strategies to tailor the surface reconstruction such as substituting/doping with metals, introducing anions, incorporating oxygen vacancies, tuning morphologies and exploiting plasmonic/thermal/photothermal effects are then introduced. Notably, comprehensive operando/in situ characterization together with computational calculations are responsible for unveiling the improvement mechanism for OER. By delivering the progress, strategies, insights, techniques, and perspectives, this review will provide a comprehensive understanding of the surface reconstruction in transition metal-based OER catalysts and future guidelines for their rational development.

Stable and Antisintering Tungsten Carbides with Controllable Active Phase for Selective Cleavage of Aryl Ether C-O Bonds

Transition-metal carbides are important materials in heterogeneous catalysis. It remains challenging yet attractive in nanoscience to construct the active phase of carbide catalysts in a controllable manner and keep a sintering-resistant property in redox reactions, especially hydroprocessing. In this work, an integrated strategy was presented to synthesize stable and well-defined tungsten carbide nanoparticles (NPs) by assembling the metal precursor onto carbon nanotubes (CNTs), wrapping a thin polymeric layer, and following a controlled carburization. The polymer served as a soft carbon source to modulate the metal/carbon ratio in the carbides and introduced amorphous carbons around the carbides to prevent the NPs from sintering. The as-built p-W_xC/CNT displayed high stability in the hydrogenolysis of aryl ether C-O bond in guaiacol for more than 150 h. Its activity was more than two and six times higher than those prepared via typical temperature-programmed reduction with gaseous carbon (W_xC/CNT-TPR) and carbothermal reduction with intrinsic carbon support (W_xC/CNT-CTR), respectively. Our p-W_xC/CNT catalyst also achieved high efficiency for selective cleavage of the aryl ether C-O bonds in lignin-derived aromatic ethers, including anisole, dimethoxylphenol, and diphenyl ether, with a robust lifespan.

High-Current-Density HER Electrocatalysts: Graphene-like Boron Layer and Tungsten as Key Ingredients in Metal Diborides

Transition-metal borides belong to a small class of non-noble-metal electrocatalysts that exhibit excellent activity toward the hydrogen evolution reaction (HER) already in bulk form; those containing graphene-like (flat) boron layers, such as α-MoB₂ , are particularly promising. In this study, the first tungsten-based boride HER electrocatalysts were studied experimentally and theoretically. Tungsten, the diborides of which (α- and β-WB₂ ) contain both the active graphene-like (flat) boron layer and the less active phosphorene-like (puckered) boron layer, could be successfully substituted (up to 30 at %) for molybdenum in α-MoB₂ . The resulting α-Mo_1-x W_x B₂ exhibited better HER activity and stability than the binaries WB₂ and MoB₂ , especially at high current density in acidic electrolytes. DFT calculations showed that the graphene-like boron layer is the most active among the studied surfaces and that tungsten promotes hydrogen generation by facilitating bonding between hydrogen atoms in contrast to molybdenum. These results should pave the way for high-current-density, abundant, and inexpensive bulk and nanoscale HER catalysts by applying structure-activity relationships.

Efficient Electrocatalyst for the Hydrogen Evolution Reaction Derived from Polyoxotungstate/Polypyrrole/Graphene

Efficient hydrogen evolution reaction (HER) from water by electrocatalysis using cost-effective materials is critical to realize the clean hydrogen production. Herein, with controlling the structure and composition of polyoxotungstate/conductive polypyrrole/graphene (PCG) precursor precisely and followed by a temperature-programmed reaction, we developed a highly active and stable catalyst: NC@W_x C/NRGO (NC: nitrogen-doped porous carbon, NRGO: nitrogen-doped reduced graphene oxide). The composite presents splendid performance towards HER in acidic media, with a small onset overpotential of 24 mV versus RHE (reversible hydrogen electrode), a low Tafel slope of 58.4 mV dec^-1 , a low overpotential of 100 mV at 10 mA cm^-2 , and remarkable long-term cycle stability. This is one of the highest HER catalysts among the tungsten carbide-based materials ever reported.

Electrochemical Dealloying of PdCu3 Nanoparticles to Achieve Pt-like Activity for the Hydrogen Evolution Reaction

Manipulating the d-band center of the metal surface and hence optimizing the free energy of hydrogen adsorption (ΔG_H ) close to the optimal adsorption energy (ΔG_H =0) for hydrogen evolution reaction (HER), is an efficient strategy to enhance the activity for HER. Herein, we report a oleylamine-mediated (acting as the solvent, stabilizer, and reducing agent) strategy to synthesize intermetallic PdCu₃ nanoparticles (NPs) without using any external reducing agent. Upon electrochemical cycling, PdCu₃ transforms into Pd-rich PdCu (ΔG_H =0.05 eV), exhibiting remarkably enhanced activity (with a current density of 25 mA cm^-2 at ∼69 mV overpotential) as an alternative to Pt for HER. The first-principle calculation suggests that formation of low coordination number Pd active sites alters the d-band center and hence optimal adsorption of hydrogen, leading to enhanced activity. This finding may provide guidelines towards the design and development of Pt-free highly active and robust electrocatalysts.

Interconnected Co-Entrapped, N-Doped Carbon Nanotube Film as Active Hydrogen Evolution Cathode over the Whole pH Range

The use of electrocatalysts with low metal content (metal-deficient) or metal free for the hydrogen evolution reaction (HER) can prevent or decrease metal ion release, which reduces environmental impact; development of such catalysts with high activity and durability over the whole pH range is thus highly desired but still remains a huge challenge. Herein, we describe the direct growth of a film consisting of interconnected Co-entrapped, N-doped carbon nanotubes on carbon cloth using chemical vapor deposition from dicyanodiamine using a Co3 O4 nanowire array as catalyst. This integrated architecture is used as a flexible 3D electrode for the electrolytic hydrogen evolution with outstanding catalytic activity and durability in acidic media. Moreover, this electrode is also highly efficient under neutral and basic conditions. It offers us an attractive carbon-based metal-deficient HER catalyst outperforming most transition-metal and all metal-free/deficient catalysts.