Visible light driven (VLD) reduced TiO2-x nanocatalysts designed by inorganic and organic reducing agent-mediated solvothermal methods for electrocatalytic and photocatalytic applications

This work presents a comparative study on the structural, optical and electrochemical characteristics of visible light driven (VLD) reduced titanium dioxide (TiO2-x ) nanocatalysts synthesized via inorganic and organic synthetic routes. X-ray diffraction (XRD) patterns, Raman spectra and X-ray absorption fine structure (XAFS) analyses reflected anatase phase titania. Whereas, the quantitative EXAFS fit and XANES analysis revealed structural distortion due to the presence of oxygen and titanium vacancies with low valent Ti states in anatase lattices of certain nanocatalysts, which subsequently leads to better electrochemical and photocatalytic activities. Moreover, owing to the large surface area and mesoporous structures, the Mg-TiO2-x nanocatalysts exhibited enhanced water adsorption and ultimately increased overall water splitting with an OER overpotential equal to 420 mV vs. RHE at a current density of 10 mA cm-2 (Tafel slope = 62 mV dec-1), extended visible light absorbance, decreased photoluminescence (PL) intensity and increased carrier lifetime in comparison with commercial titania.

Plasma Processing and Treatment of 2D Transition Metal Dichalcogenides: Tuning Properties and Defect Engineering

Two-dimensional transition metal dichalcogenides (TMDs) offer fascinating opportunities for fundamental nanoscale science and various technological applications. They are a promising platform for next generation optoelectronics and energy harvesting devices due to their exceptional characteristics at the nanoscale, such as tunable bandgap and strong light-matter interactions. The performance of TMD-based devices is mainly governed by the structure, composition, size, defects, and the state of their interfaces. Many properties of TMDs are influenced by the method of synthesis so numerous studies have focused on processing high-quality TMDs with controlled physicochemical properties. Plasma-based methods are cost-effective, well controllable, and scalable techniques that have recently attracted researchers' interest in the synthesis and modification of 2D TMDs. TMDs' reactivity toward plasma offers numerous opportunities to modify the surface of TMDs, including functionalization, defect engineering, doping, oxidation, phase engineering, etching, healing, morphological changes, and altering the surface energy. Here we comprehensively review all roles of plasma in the realm of TMDs. The fundamental science behind plasma processing and modification of TMDs and their applications in different fields are presented and discussed. Future perspectives and challenges are highlighted to demonstrate the prominence of TMDs and the importance of surface engineering in next-generation optoelectronic applications.

Novel Sb-SnO2 Electrode with Ti3+ Self-Doped Urchin-Like Rutile TiO2 Nanoclusters as the Interlayer for the Effective Degradation of Dye Pollutants

Stable and efficient SnO₂ electrodes are very promising for effectively degrading refractory organic pollutants in wastewater treatment. In this regard, we firstly prepared Ti³⁺ self-doped urchin-like rutile TiO₂ nanoclusters (TiO_2-x NCs) on a Ti mesh substrate by hydrothermal and electroreduction to serve as an interlayer for the deposition of Sb-SnO₂ . The TiO_2-x NCs/Sb-SnO₂ anode exhibited a high oxygen evolution potential (2.63 V vs. SCE) and strong ⋅OH generation ability for the enhanced amount of absorbed oxygen species. Thus, the degradation results demonstrated its good rhodamine B (RhB), methylene blue (MB), alizarin yellow R (AYR), and methyl orange (MO) removal performance, with the rate constant increased 5.0, 1.9, 1.9, and 4.7 times, respectively, compared to the control Sb-SnO₂ electrode. RhB and AYR degradation mechanisms are also proposed based on the results of high-performance liquid chromatography coupled with mass spectrometry and quenching experiments. More importantly, this unique rutile interlayer prolonged the anode lifetime sixfold, given its good lattice match with SnO₂ and the three-dimensional concave-convex structure. Consequently, this work paves a new way for designing the crystal form and structure of the interlayers to obtain efficient and stable SnO₂ electrodes for addressing dye wastewater problems.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Oxygen Vacancy-Induced Construction of CoO/h-TiO2 Z-Scheme Heterostructures for Enhanced Photocatalytic Hydrogen Evolution

Environmentally friendly catalysts with excellent performance and low cost are critical for photocatalysis. Herein, using hydrogenated TiO₂ (h-TiO₂) nanosheets with enriched oxygen vacancies as the support, two-dimensional CoO/h-TiO₂ Z-scheme heterostructures are fabricated for hydrogen production through photocatalytic water splitting. It is revealed that the oxygen vacancies in h-TiO₂ can inhibit the oxidation of Co²⁺ into high-valence Co³⁺ during the hydrothermal reaction and thermal treatment processes. A CoO/h-TiO₂ Z-scheme heterostructure possesses a space charge region and a built-in electric field at the interface, and oxygen vacancies in h-TiO₂ can provide more reactive sites, which synergistically improve the separation and transportation of photogenerated carriers. As a result, the photocatalytic hydrogen evolution rate achieves 129.75 μmol·h^-1 (with 50 mg of photocatalysts) on the optimized CoO/h-TiO₂ heterostructures. This work provides a new design idea for the preparation of excellent TiO₂-based photocatalysts.

Versatile Synthesis of Mesoporous Crystalline TiO2 Materials by Monomicelle Assembly

Mesoscale TiO₂ structures have realized many technological applications-ranging from catalysis and biomedicine to energy storage and conversion-because of their large mesoporosities offering desirable accessibility and mass transport. Tailoring mesoporous TiO₂ structures with novel mesoscopic and microscopic configurations is envisaged to offer ample opportunities for further applications. In this Review, we explain how to synthesize novel mesoporous TiO₂ materials and present recent examples. An emphasis is placed on a "monomicelle assembly" strategy as an emerging and powerful approach to direct the formation of mesostructured TiO₂ with precise control over its structural orientations and architectures. Furthermore, typical examples of mesoporous TiO₂ for applications in batteries and photocatalysis are highlighted. The Review ends with an outlook towards the synthesis of mesoporous TiO₂ with tailored architectures by self-assembly, which could pave the way for developing advanced energy conversion and storage devices.

A Mixed-Metal Porphyrinic Framework Promoting Gas-Phase CO2 Photoreduction without Organic Sacrificial Agents

A photoactive porphyrinic metal-organic framework (MOF) has been prepared by exchanging Ti into a Zr-based MOF precursor. The resultant mixed-metal Ti/Zr porphyrinic MOF demonstrates much-improved efficiency for gas-phase CO₂ photoreduction into CH₄ and CO under visible-light irradiation using water vapor compared to the parent Zr-MOF. Insightful studies have been conducted to probe the photocatalysis processes. This work provides the first example of gas-phase CO₂ photoreduction into methane without organic sacrificial agents on a MOF platform, thereby paving an avenue for developing MOF-based photocatalysts for application in CO₂ photoreduction and other types of photoreactions.

Internal Polarization Modulation in Bi2 MoO6 for Photocatalytic Performance Enhancement under Visible-Light Illumination

A built-in electric field from polarization inside polar photocatalysts could provide the driving force for photogenerated electrons and holes to move in opposite directions for better separation to improve their photocatalytic performance. The photocatalytic performance of a polar photocatalyst of Bi₂ MoO₆ has been enhanced through the precise control of its structure to increase internal polarization. DFT calculations predicted that a shortened crystal lattice parameter b in Bi₂ MoO₆ could induce larger internal polarization, which was achieved by the modulation of the pH of the reaction solution during a solvothermal synthetic process. A series of Bi₂ MoO₆ samples were created with reaction solutions of pH≈1, 4, and 8; the crystal lattice parameter b was found to decrease gradually with increasing solution pH. Accordingly, these Bi₂ MoO₆ samples demonstrated a gradually enhanced photocatalytic performance with decreasing crystal lattice parameter b, as demonstrated by the photocatalytic degradation of sulfamethoxazole/phenol and disinfection of Staphylococcus aureus bacteria under visible-light illumination due to improved photogenerated charge-carrier separation. This study demonstrates an innovative design strategy for materials to further enhance the photocatalytic performance of polar photocatalysts for a broad range of technical applications.

Thermal Transition of Bimetallic Metal-Phenolic Networks to Biomass-Derived Hierarchically Porous Nanofibers

The development and utilization of biomass resources could contribute to new materials for long-term sustainable energy storage and environmental applications, reduce environmental impacts, and meet the urgent need for green and sustainable development strategies. Herein, a bimetallic metal-phenolic network (MPN) was applied to incorporate different metallic element species into cattle skin and fabricate collagen-fiber-derived complex oxide nanofibers using natural polyphenols (Myrica tannins). Direct thermal transition of these biomass-MPN composites generates hierarchically porous nanofibers possessing micro- and mesoporous architectures along with a well-preserved macroscopic structure. The pore system and complex oxide composition provide excellent photocatalytic performance. This low-cost, simple, and readily scalable MPN-based approach provides a straightforward route to synthesize nanostructured materials directly from biomass, which could play important roles in a wide range of potential applications.

Synthesis, properties, and applications of black titanium dioxide nanomaterials

Photocatalysis has been regarded as one of best solutions to using the sunlight to produce hydrogen from water and to removing organic pollutants from the environment, and titanium dioxide (TiO₂) nanomaterials have been treated as the primary photocatalyst for these purposes. However, their large band gap has largely limited the activity to the UV region of the solar spectrum. The discovery of black TiO₂ in 2011 has triggered world-wide research interests with new hope to overcome this problem. This review briefly summarizes the recent progresses of black TiO₂ nanomaterials, including their synthesis, properties and applications, to provide a timely update and to inspire more ideas in the related research.

Fe/W Co-Doped BiVO4 Photoanodes with a Metal-Organic Framework Cocatalyst for Improved Photoelectrochemical Stability and Activity

BiVO₄ has been identified as one of the excellent visible light responsive photoanodes for use in photoelectrochemical (PEC) water splitting. However, pristine BiVO₄ usually exhibits relative low photocatalytic properties owing to insufficient charge separation and transport characteristics. Although the marginal n-type doping of higher valence ions can obviously raise the photocurrent value, it by no means improves the PEC stability. In this work, we successfully enhanced the PEC stability of BiVO₄ by doping Fe ions in substitution of Bi. Density functional theory calculations have illustrated that Fe-doping would result in an impurity band in the forbidden gap, and thus narrow its energy gap. More importantly, Fe-doping can synergize with other means to further improve the PEC activities of BiVO₄ . Therefore, we fabricated a nanoporous Fe/W co-doped BiVO₄ photoelectrode, and then loaded the metal-organic framework (MOF) MIL-100(Fe) as cocatalyst to further promote the separation of charge carriers. To the best of our knowledge, MOFs have not yet been utilized as a cocatalyst to facilitate the charge separation, which could increase the photocurrent density of Fe/W co-doped BiVO₄ .

Black N/H-TiO2 Nanoplates with a Flower-Like Hierarchical Architecture for Photocatalytic Hydrogen Evolution

A facile two-step strategy was used to prepare black of hydrogenated/nitrogen-doped TiO₂ nanoplates (NHTA) with a flower-like hierarchical architecture. In situ nitriding and self-assembly was realized by hydrothermal synthesis using tripolycyanamide as a N source and as a structure-directing agent. After thorough characterization, it was found that the hydrogenation treatment did not damage the flower-like architecture but distorted the anatase crystal structure and significantly changed the band structure of NHTA owing to the increased concentration of oxygen vacancies, hydroxyl groups, and Ti³⁺ cations. Under AM 1.5 illumination, the photocatalytic H₂ evolution rate on the black NHTA was approximately 1500 μmol g^-1  h^-1 , which was much better than the N-doped TiO₂ nanoplates (≈690 μmol g^-1  h^-1 ). This improvement in the hydrogen evolution rate was attributed to a reduced bandgap, enhanced separation of the photogenerated charge carriers, and an increase in the surface-active sites.

Synthesis of Ti3+ self-doped TiO2 nanocrystals based on Le Chatelier's principle and their application in solar light photocatalysis

Ti³⁺-doped TiO₂ nanocrystals, synthesized based on Le Chatelier's principle, show a high degradation ratio of 99% towards MB under sun light.

Surface Engineering and Design Strategy for Surface-Amorphized TiO2@Graphene Hybrids for High Power Li-Ion Battery Electrodes

Surface amorphization provides unprecedented opportunities for altering and tuning material properties. Surface-amorphized TiO2@graphene synthesized using a designed low temperature-phase transformation technique exhibits significantly improved rate capability compared to well-crystallized TiO2@graphene and bare TiO2 electrodes. These improvements facilitates lithium-ion transport in both insertion and extraction processes and enhance electrolyte absorption capability.

Facile synthesis of the Ti3+ self-doped TiO2-graphene nanosheet composites with enhanced photocatalysis

This study developed a facile approach for preparing Ti(3+) self-doped TiO2-graphene photocatalyst by a one-step vacuum activation technology involved a relative lower temperature, which could be activated by the visible light owing to the synergistic effect among Ti(3+) doping, some new intersurface bonds generation and graphene oxide reduction. Compared with the traditional methods, the vacuum activation involves a low temperature and low-costing, which can achieve the reduction of GO, the self doping of Ti(3+) in TiO2 and the loading of TiO2 nanoparticles on GR surface at the same time. These resulting TiO2-graphene composites show the high photodegradation rate of MO, high hydrogen evolution activity and excellent IPCE in the visible light irradiation. The facile vacuum activation method can provide an effective and practical approach to improve the performance of TiO2-graphene and other metal oxides-graphene towards their practical photocatalytic applications.