Strukturbasierte Entwicklung von Protein-Protein-Interaktionsinhibitoren: Stabilisierung und Nachahmung von Peptidliganden

Constraining and Modifying Peptides Using Pd-Mediated Cysteine Allylation

Over the past decades, several strategies for inducing and stabilizing secondary structure formation in peptides have been developed to increase their proteolytic stability and their binding affinity to specific interaction partners. Here, we report how our recently introduced chemoselective Pd-catalyzed cysteine allylation reaction can be extended to stapling and how the resulting alkene-containing staples themselves can be further modified to introduce additional probes into such stabilized peptides. The latter is demonstrated by introducing a fluorophore as well as a PEG moiety into different stapled peptides using bioorthogonal thiol-ene and Diels-Alder reactions. Furthermore, we investigated structural implications of our allyl staples when used to replace conformationally relevant disulfide bridges. To this end, we chose a selective binder of integrin α3 β1 (LXY3), which is only active in its cyclic disulfide form. We replaced the disulfide bridge by different stapling reagents in order to increase stability and binding affinity towards integrin α3 β1 .

Protein Backbone Alteration in Non-Hairpin β-Turns: Impacts on Tertiary Folded Structure and Folded Stability

The importance of β-turns to protein folding has motivated extensive efforts to stabilize the motif with non-canonical backbone connectivity. Prior work has focused almost exclusively on turns between strands in a β-sheet (i. e., hairpins). Turns in other structural contexts are also common in nature and have distinct conformational preferences; however, design principles for their mimicry remain poorly understood. Here, we report strategies that stabilize non-hairpin β-turns through systematic evaluation of the impacts of backbone alteration on the high-resolution folded structure and folded stability of a helix-loop-helix prototype protein. Several well-established hairpin turn mimetics are shown detrimental to folded stability and/or hydrophobic core packing, while less-explored modification schemes that reinforce alternate turn types lead to improved stability and more faithful structural mimicry. Collectively, these results have implications in control over protein folding through chemical modification as well as the design of protein mimetics.

A Modular Synthesis of Teraryl‐based α‐Helix Mimetics, Part 5: A Complete Set of Pyridine Boronic Acid Pinacol Esters Featuring Side Chains of Proteinogenic Amino Acids

Teraryl‐based α‐helix mimetics have proven to be useful compounds for the inhibition of protein‐protein interactions (PPI). We have developed a modular and flexible approach for the synthesis of teraryl‐based α‐helix mimetics using pyridine containing boronic acid building blocks to increase the water solubility. Following our initial publication in which we have introduced the methodology in combination with sequential Pd‐catalyzed cross‐coupling for teraryl assembly, we can now report a complete set of pyridine based boronic acid building blocks decorated with side chains of all proteinogenic amino acids relevant for PPI (Ala, Arg, Asn, Asp, Cys, Gln, Glu, His, Ile, Leu, Lys, Met, Phe, Ser, Thr, Trp, Tyr, Val) to complement the core fragment set. For a representative set of teraryls we have studied the influence of the pyridine rings on the solubility of the assembled oligoarenes.

Modular Synthesis of Teraryl‐based alpha ‐Helix Mimetics, Part 3: Iodophenyltriflate Core Fragments Featuring Side Chains of Proteinogenic Amino Acids

Teraryl‐based α‐helix mimetics have proven to be useful compounds for the inhibition of protein‐protein interactions (PPI). We have developed a modular and flexible approach for the synthesis of teraryl‐based α‐helix mimetics using a benzene core unit featuring two leaving groups of differentiated reactivity in the Pd‐catalyzed cross‐coupling used for teraryl assembly. In previous publications we have introduced the methodology of 4‐iodophenyltriflates decorated with the side chains of some of the proteinogenic amino acids. We herein report the core fragments corresponding to the previously missing amino acids Arg, Asn, Asp, Met, Trp and Tyr. Therefore, our set now encompasses all relevant amino acid analogues with the exception of His. In order to be compatible with the triflate moiety, some of the nucleophilic side chains had to be provided in a protected form to serve as stable building blocks. Additionally, cross‐coupling procedures for the assembly of teraryls were investigated.

Modular Synthesis of Teraryl‐based alpha‐Helix Mimetics, Part 4: Core Fragments with two Halide Leaving Groups Featuring Side Chains of Proteinogenic Amino Acids

Teraryl‐based α‐helix mimetics have proven to be useful compounds for the inhibition of protein‐protein interactions (PPI). We have developed a modular and flexible approach for the synthesis of teraryl‐based α‐helix mimetics using a benzene core unit featuring two halide leaving groups of differentiated reactivity in the Pd‐catalyzed cross‐coupling used for teraryl assembly. The use of para‐bromo iodoarene core fragments resolved the issue of hydrolysis during cross‐coupling that was observed when using triflate as a leaving group. We report a complete set of para‐bromoiodoarene core fragments decorated with side chains of all proteinogenic amino acids relevant for PPI (Ala, Arg, Asn, Asp, Cys, Gln, Glu, His, Ile, Leu, Lys, Met, Phe, Ser, Thr, Trp, Tyr and Val). In order to be compatible with general cross‐coupling conditions, some of the nucleophilic side chains had to be provided in a protected form to serve as stable building blocks.

A Conformationally Stable Acyclic β-Hairpin Scaffold Tolerating the Incorporation of Poorly β-Sheet-Prone Amino Acids

The β-hairpin is a structural element of native proteins, but it is also a useful artificial scaffold for finding lead compounds to convert into peptidomimetics or non-peptide structures for drug discovery. Since linear peptides are synthetically more easily accessible than cyclic ones, but are structurally less well-defined, we propose XWXWXpPXK(/R)X(R) as an acyclic but still rigid β-hairpin scaffold that is robust enough to accommodate different types of side chains, regardless of the secondary-structure propensity of the X residues. The high conformational stability of the scaffold results from tight contacts between cross-strand cationic and aromatic side chains, combined with the strong tendency of the d-Pro-l-Pro dipeptide to induce a type II' β-turn. To demonstrate the robustness of the scaffold, we elucidated the NMR structures and performed molecular dynamics (MD) simulations of a series of peptides displaying mainly non-β-branched, poorly β-sheet-prone residues at the X positions. Both the NMR and MD data confirm that our acyclic β-hairpin scaffold is highly versatile as regards the amino-acid composition of the β-sheet face opposite to the cationic-aromatic one.

Protein Macrocyclization for Tertiary Structure Stabilization

Proteins possess unique molecular recognition capabilities and enzymatic activities, features that are usually tied to a particular tertiary structure. To make use of proteins for biotechnological and biomedical purposes, it is often required to enforce their tertiary structure in order to ensure sufficient stability under the conditions inherent to the application of interest. The introduction of intramolecular crosslinks has proven efficient in stabilizing native protein folds. Herein, we give an overview of methods that allow the macrocyclization of expressed proteins, discussing involved reaction mechanisms and structural implications.

Synthesis of Three-Dimensional (Di)Azatricyclododecene Scaffold and Its Application to Peptidomimetics

A novel sp³ carbon-rich tricyclic 3D scaffold-based peptide mimetic compound library was constructed to target protein-protein interactions. Tricyclic framework 7 was synthesized from 9-azabicyclo[3,3,1]nonan-3-one (11) via a gold(I)-catalyzed Conia-ene reaction. The electron-donating group on the pendant alkyne of cyclization precursor 12 b-e was the key to forming 6-endo-dig cyclized product 7 with complete regioselectivity. Using the synthetic strategy for regioselective construction of bridged tricyclic framework 7, a diazatricyclododecene 3D-scaffold 8 a, which enables the introduction of substituents into the scaffold to mimic amino acid side chains, was designed and synthesized. The peptide mimetics 21 a-u were synthesized via step-by-step installation of three substituents on diazatricyclododecene scaffold 8 a. Compounds 21 a-h were synthesized as α-helix peptide mimics of hydrophobic ZZxxZ and ZxxZZ sequences (Z=Leu or Phe) and subjected to cell-based assays: antiproliferative activity, HIF-1 transcriptional activity which is considered to affect cancer malignancy, and antiviral activity against rabies virus. Compound 21 a showed the strongest inhibitory activity of HIF-1 transcriptional activity (IC₅₀ =4.1±0.8 μM), whereas compounds 21 a-g showed antiviral activity with IC₅₀ values of 4.2-12.4 μM, suggesting that the 3D-scaffold 8 a has potential as a versatile peptide mimic skeleton.

Bicyclic β-Sheet Mimetics that Target the Transcriptional Coactivator β-Catenin and Inhibit Wnt Signaling

Protein complexes are defined by the three-dimensional structure of participating binding partners. Knowledge about these structures can facilitate the design of peptidomimetics which have been applied for example, as inhibitors of protein-protein interactions (PPIs). Even though β-sheets participate widely in PPIs, they have only rarely served as the basis for peptidomimetic PPI inhibitors, in particular when addressing intracellular targets. Here, we present the structure-based design of β-sheet mimetics targeting the intracellular protein β-catenin, a central component of the Wnt signaling pathway. Based on a protein binding partner of β-catenin, a macrocyclic peptide was designed and its crystal structure in complex with β-catenin obtained. Using this structure, we designed a library of bicyclic β-sheet mimetics employing a late-stage diversification strategy. Several mimetics were identified that compete with transcription factor binding to β-catenin and inhibit Wnt signaling in cells. The presented design strategy can support the development of inhibitors for other β-sheet-mediated PPIs.

Increased Valency Improves Inhibitory Activity of Peptides Targeting Proprotein Convertase Subtilisin/Kexin Type 9 (PCSK9)

Proprotein convertase subtilisin/kexin type 9 (PCSK9) is a clinically validated target for treating hypercholesterolemia. Peptide-based PCSK9 inhibitors have attracted pharmaceutical interest, but the effect of multivalency on bioactivity is poorly understood. Here we designed bivalent and tetravalent dendrimers, decorated with the PCSK9 inhibitory peptides Pep2-8[RRG] or P9-38, to study relationships between peptide binding affinity, peptide valency, and PCSK9 inhibition. Increased valency resulted in improved PCSK9 inhibition for both peptides, with activity improvements of up to 100-fold achieved for the P9-38-decorated dendrimers compared to monomeric P9-38 in in vitro competition binding assays. Furthermore, the P9-38-decorated dendrimers showed improved potency at restoring functional low-density lipoprotein (LDL) receptor levels and internalizing LDL in the presence of PCSK9, demonstrating significant cell-based activity at picomolar concentrations. This study demonstrates the potential of increasing valency as a strategy for increasing the efficacy of peptide-based PCSK9 therapeutics.

Development of Generic G Protein Peptidomimetics Able to Stabilize Active State Gs Protein-Coupled Receptors for Application in Drug Discovery

G protein-coupled receptors (GPCRs) represent an important group of membrane proteins that play a central role in modern medicine. Unfortunately, conformational promiscuity hampers full therapeutic exploitation of GPCRs, since the largest population of the receptor will adopt a basal conformation, which subsequently challenges screens for agonist drug discovery programs. Herein, we describe a set of peptidomimetics able to mimic the ability of G proteins in stabilizing the active state of the β₂ adrenergic receptor (β₂ AR) and the dopamine 1 receptor (D1R). During fragment-based screening efforts, these (un)constrained peptide analogues of the α₅ helix in G_s proteins, were able to identify agonism pre-imprinted fragments for the examined GPCRs, and as such, they behave as a generic tool, enabling an engagement in agonist earmarked discovery programs.

Scanning Protein Surfaces with DNA-Encoded Libraries

Understanding the ligandability of a target protein, defined as the capability of a protein to bind drug-like compounds on any site, can give important stimuli to drug-development projects. For instance, inhibition of protein-protein interactions usually depends on the identification of protein surface binders. DNA-encoded chemical libraries (DELs) allow scanning of protein surfaces with large chemical space. Encoded library selection screens uncovered several protein-protein interaction inhibitors and compounds binding to the surface of G protein-coupled receptors (GPCRs) and kinases. The protein surface-binding chemotypes from DELs are predominantly chemically modified and cyclized peptides, and functional small-molecule peptidomimetics. Peptoid libraries and structural peptidomimetics have been less studied in the DEL field, hinting at hitherto less populated chemical space and suggesting alternative library designs. Roughly a third of bioactive molecules evolved from smaller, target-focused libraries. They showcase the potential of encoded libraries to identify more potent molecules from weak, for example, fragment-like, starting points.

Structure Based Design of Bicyclic Peptide Inhibitors of RbAp48

The scaffolding protein RbAp48 is part of several epigenetic regulation complexes and is overexpressed in a variety of cancers. In order to develop tool compounds for the study of RbAp48 function, we have developed peptide inhibitors targeting the protein-protein interaction interface between RbAp48 and the scaffold protein MTA1. Based on a MTA1-derived linear peptide with low micromolar affinity and informed by crystallographic analysis, a bicyclic peptide was developed that inhibits the RbAp48/MTA1 interaction with a very low nanomolar KD value of 8.56 nM, and which showed appreciable stability against cellular proteases. Design included exchange of a polar amide cyclization strategy to hydrophobic aromatic linkers enabling mono- and bicyclization by means of cysteine alkylation, which improved affinity by direct interaction of the linkers with a hydrophobic residue on RbAp48. Our results demonstrate that stepwise evolution of a structure-based design is a suitable strategy for inhibitor development targeting PPIs.

Selective Affimers Recognise the BCL-2 Family Proteins BCL-xL and MCL-1 through Noncanonical Structural Motifs*

The BCL-2 family is a challenging group of proteins to target selectively due to sequence and structural homologies across the family. Selective ligands for the BCL-2 family regulators of apoptosis are useful as probes to understand cell biology and apoptotic signalling pathways, and as starting points for inhibitor design. We have used phage display to isolate Affimer reagents (non-antibody-binding proteins based on a conserved scaffold) to identify ligands for MCL-1, BCL-xL , BCL-2, BAK and BAX, then used multiple biophysical characterisation methods to probe the interactions. We established that purified Affimers elicit selective recognition of their target BCL-2 protein. For anti-apoptotic targets BCL-xL and MCL-1, competitive inhibition of their canonical protein-protein interactions is demonstrated. Co-crystal structures reveal an unprecedented mode of molecular recognition; where a BH3 helix is normally bound, flexible loops from the Affimer dock into the BH3 binding cleft. Moreover, the Affimers induce a change in the target proteins towards a desirable drug-bound-like conformation. These proof-of-concept studies indicate that Affimers could be used as alternative templates to inspire the design of selective BCL-2 family modulators and more generally other protein-protein interaction inhibitors.

Aromatic Foldamer Helices as α-Helix Extended Surface Mimetics

Helically folded aromatic oligoamide foldamers have a size and geometrical parameters very distinct from those of α-helices and are not obvious candidates for α-helix mimicry. Nevertheless, they offer multiple sites for attaching side chains. It was found that some arrays of side chains at the surface of an aromatic helix make it possible to mimic extended α-helical surfaces. Synthetic methods were developed to produce quinoline monomers suitably functionalized for solid phase synthesis. A dodecamer was prepared. Its crystal structure validated the initial design and showed helix bundling involving the α-helix-like interface. These results open up new uses of aromatic helices to recognize protein surfaces and to program helix bundling in water.

Cyclic Peptides as Drugs for Intracellular Targets: The Next Frontier in Peptide Therapeutic Development

Developing macrocyclic peptides that can reach intracellular targets is a significant challenge. This review discusses the most recent strategies used to develop cell permeable cyclic peptides that maintain binding to their biological target inside the cell. Macrocyclic peptides are unique from small molecules because traditional calculated physical properties are unsuccessful for predicting cell membrane permeability. Peptide synthesis and experimental membrane permeability is the only strategy that effectively differentiates between cell permeable and cell impermeable molecules. Discussed are chemical strategies, including backbone N-methylation and stereochemical changes, which have produced molecular scaffolds with improved cell permeability. However, these improvements often come at the expense of biological activity as chemical modifications alter the peptide conformation, frequently impacting the compound's ability to bind to the target. Highlighted is the most promising approach, which involves side-chain alterations that improve cell permeability without impact binding events.

Activity-Directed Synthesis of Inhibitors of the p53/hDM2 Protein-Protein Interaction

Protein-protein interactions (PPIs) provide a rich source of potential targets for drug discovery and biomedical science research. However, the identification of structural-diverse starting points for discovery of PPI inhibitors remains a significant challenge. Activity-directed synthesis (ADS), a function-driven discovery approach, was harnessed in the discovery of the p53/hDM2 PPI. Over two rounds of ADS, 346 microscale reactions were performed, with prioritisation on the basis of the activity of the resulting product mixtures. Four distinct and novel series of PPI inhibitors were discovered that, through biophysical characterisation, were shown to have promising ligand efficiencies. It was thus shown that ADS can facilitate ligand discovery for a target that does not have a defined small-molecule binding site, and can provide distinctive starting points for the discovery of PPI inhibitors.

Stapled Peptides as HIF-1α/p300 Inhibitors: Helicity Enhancement in the Bound State Increases Inhibitory Potency

Protein-protein interactions (PPIs) control virtually all cellular processes and have thus emerged as potential targets for development of molecular therapeutics. Peptide-based inhibitors of PPIs are attractive given that they offer recognition potency and selectivity features that are ideal for function, yet, they do not predominantly populate the bioactive conformation, frequently suffer from poor cellular uptake and are easily degraded, for example, by proteases. The constraint of peptides in a bioactive conformation has emerged as a promising strategy to mitigate against these liabilities. In this work, using peptides derived from hypoxia-inducible factor 1 (HIF-1α) together with dibromomaleimide stapling, we identify constrained peptide inhibitors of the HIF-1α/p300 interaction that are more potent than their unconstrained sequences. Contrary to expectation, the increased potency does not correlate with an increased population of an α-helical conformation in the unbound state as demonstrated by experimental circular dichroism analysis. Rather, the ability of the peptide to adopt a bioactive α-helical conformation in the p300 bound state is better supported in the constrained variant as demonstrated by molecular dynamics simulations and circular dichroism difference spectra.

Multicomponent Peptide Stapling as a Diversity-Driven Tool for the Development of Inhibitors of Protein-Protein Interactions

Stapled peptides are chemical entities in-between biologics and small molecules, which have proven to be the solution to high affinity protein-protein interaction antagonism, while keeping control over pharmacological performance such as stability and membrane penetration. We demonstrate that the multicomponent reaction-based stapling is an effective strategy for the development of α-helical peptides with highly potent dual antagonistic action of MDM2 and MDMX binding p53. Such a potent inhibitory activity of p53-MDM2/X interactions was assessed by fluorescence polarization, microscale thermophoresis, and 2D NMR, while several cocrystal structures with MDM2 were obtained. This MCR stapling protocol proved efficient and versatile in terms of diversity generation at the staple, as evidenced by the incorporation of both exo- and endo-cyclic hydrophobic moieties at the side chain cross-linkers. The interaction of the Ugi-staple fragments with the target protein was demonstrated by crystallography.

Synthesis of Bis-Glyoxylamide Peptidomimetics Derived from Bis-N-acetylisatins Linked at C5 by a Methylene or Oxygen Bridge

The bis-glyoxylamide peptidomimetics have been synthesized from bis-N-acetylisatins linked at C5 by ring-opening with alcohols, amines, and amino acid methyl ester hydrochlorides. X-ray images of single crystals of bis-glyoxylamide peptidomimetics have been obtained.

Constrained Peptides with Fine-Tuned Flexibility Inhibit NF-Y Transcription Factor Assembly

Protein complex formation depends on the interplay between preorganization and flexibility of the binding epitopes involved. The design of epitope mimetics typically focuses on stabilizing a particular bioactive conformation, often without considering conformational dynamics, which limits the potential of peptidomimetics against challenging targets such as transcription factors. We developed a peptide-derived inhibitor of the NF-Y transcription factor by first constraining the conformation of an epitope through hydrocarbon stapling and then fine-tuning its flexibility. In the initial set of constrained peptides, a single non-interacting α-methyl group was observed to have a detrimental effect on complex stability. Biophysical characterization revealed how this methyl group affects the conformation of the peptide in its bound state. Adaption of the methylation pattern resulted in a peptide that inhibits transcription factor assembly and subsequent recruitment to the target DNA.

Lipidated Stapled Peptides Targeting the Acyl Binding Protein UNC119

The acyl-binding UNC119 proteins mediate the activation and transport of various N-myristoylated proteins. In particular, UNC119a plays a crucial role in the completion of cytokinesis. Herein, we report the use of a lipidated peptide originating from the UNC119 binding partner Gnat1 as the basis for the design of lipidated, stabilized α-helical peptides that target UNC119a. By using the hydrocarbon peptide-stapling approach, cell-permeable binders of UNC119a were generated that induced the accumulation of cytokinetic and binucleated cells; this suggests UNC119a as a potential target for the inhibition of cytokinesis.

Trifluoromethylated Proline Surrogates as Part of "Pro-Pro" Turn-Inducing Templates

Proline is often found as a turn inducer in peptide or protein domains. Exploitation of its restricted conformational freedom led to the development of the d-Pro-l-Pro (corresponding to (R)-Pro-(S)-Pro) segment as a "templating" unit, frequently used in the design of β-hairpin peptidomimetics, in which conformational stability is, however, inherently linked to the cis-trans isomerization of the prolyl amide bonds. In this context, the stereoelectronic properties of the CF₃ group can aid in conformational control. Herein, the impact of α-trifluoromethylated proline analogues is examined for the design of enhanced β-turn inducers. A theoretical conformational study permitted the dipeptide (R)-Pro-(R)-TfmOxa (TfmOxa: 2-trifluoromethyloxazolidine-2-carboxylic acid) to be selected as a template with an increased trans-cis rotational energy barrier. NMR spectroscopic analysis of the Ac-(R)-Pro-(R)-TfmOxa-(S)-Val-OtBu β-turn model, obtained through an original synthetic pathway, validated the prevalence of a major trans-trans conformer and indicated the presence of an internal hydrogen bond. Altogether, it was shown that the (R)-Pro-(R)-TfmOxa template fulfilled all crucial β-turn-inducer criteria.

Autophagy inducing cyclic peptides constructed by methionine alkylation

Peptides that induced autophagy at micromolar concentrations with improved proteolytic resistance properties were generated using the facile methionine bis-alkylation method. Notably, a short bicyclic peptide 7f was proven to be the most potent one among the designed peptides in regards to autophagy inducing activity. This study facilitated the development of a peptide-based autophagy inducer and demonstrated the potential applications of the methionine alkylation-based macrocyclization method for the diversity-oriented generation of peptide-based autophagy inducers.

RNA Structure and Cellular Applications of Fluorescent Light-Up Aptamers

The cellular functions of RNA are not limited to their role as blueprints for protein synthesis. In particular, noncoding RNA, such as, snRNAs, lncRNAs, miRNAs, play important roles. With increasing numbers of RNAs being identified, it is well known that the transcriptome outnumbers the proteome by far. This emphasizes the great importance of functional RNA characterization and the need to further develop tools for these investigations, many of which are still in their infancy. Fluorescent light-up aptamers (FLAPs) are RNA sequences that can bind nontoxic, cell-permeable small-molecule fluorogens and enhance their fluorescence over many orders of magnitude upon binding. FLAPs can be encoded on the DNA level using standard molecular biology tools and are subsequently transcribed into RNA by the cellular machinery, so that they can be used as fluorescent RNA tags (FLAP-tags). In this Minireview, we give a brief overview of the fluorogens that have been developed and their binding RNA aptamers, with a special focus on published crystal structures. A summary of current and future cellular FLAP applications with an emphasis on the study of RNA-RNA and RNA-protein interactions using split-FLAP and Förster resonance energy transfer (FRET) systems is given.

Peptide Nanomaterials Designed from Natural Supramolecular Systems

Natural supramolecular assemblies exhibit unique structural and functional properties that have been optimized over the course of evolution. Inspired by these natural systems, various bio-nanomaterials have been developed using peptides, proteins, and nucleic acids as components. Peptides are attractive building blocks because they enable the important domains of natural protein assemblies to be isolated and optimized while retaining the original structures and functions. Furthermore, the peptide subunits can be conjugated with exogenous molecules such as peptides, proteins, nucleic acids, and metal nanoparticles to generate advanced functions. In this personal account, we summarize recent progress in the construction of peptide-based nanomaterial designed from natural supramolecular systems, including (1) artificial viral capsids, (2) self-assembled nanofibers, and (3) protein-binding motifs. The peptides inspired by nature should provide new design principles for bio-nanomaterials.

Differential Effects of β3 - versus β2 -Amino Acid Residues on the Helicity and Recognition Properties of Bim BH3-Derived α/β-Peptides

Oligomers containing α- and β-amino acid residues (α/β-peptides) have been shown to mimic the α-helical conformation of conventional peptides when the unnatural residues are derived from β³ -amino acids or cyclic β-amino acids, but the impact of incorporating β² residues has received little attention. The effects of β² residues on the conformation and recognition behavior of α/β-peptides that mimic an isolated α-helix were investigated. This effort has focused on 26-mers based on the Bim BH3 domain; a set of isomers with identical α/β backbones that differ only in the placement of certain side chains along the backbone (β³ vs. β² substitution) was compared. Circular dichroism data suggest that β² residues can be helix-destabilizing relative to β³ residues, although the size of this effect seems to depend on side chain identity. Binding data show that β³ →β² substitution at sites that contact a partner protein, Bcl-x_L , can influence affinity in a way that transcends effects on helicity.

In Situ Cyclization of Native Proteins: Structure-Based Design of a Bicyclic Enzyme

Increased tolerance of enzymes towards thermal and chemical stress is required for many applications and can be achieved by macrocyclization of the enzyme resulting in the stabilizing of its tertiary structure. Thus far, macrocyclization approaches utilize a very limited structural diversity, which complicates the design process. Herein, we report an approach that enables cyclization through the installation of modular crosslinks into native proteins composed entirely of proteinogenic amino acids. Our stabilization procedure involves the introduction of three surface-exposed cysteine residues, which are reacted with a triselectrophile, resulting in the in situ cyclization of the protein (INCYPRO). A bicyclic version of sortase A was designed that exhibits increased tolerance towards thermal as well as chemical denaturation, and proved to be efficient in protein labeling under denaturing conditions. In addition, we applied INCYPRO to the KIX domain, resulting in up to 24 °C increased thermal stability.

Rational Design of a 310 -Helical PIP-Box Mimetic Targeting PCNA, the Human Sliding Clamp

The human sliding clamp (PCNA) controls access to DNA for many proteins involved in DNA replication and repair. Proteins are recruited to the PCNA surface by means of a short, conserved peptide motif known as the PCNA-interacting protein box (PIP-box). Inhibitors of these essential protein-protein interactions may be useful as cancer therapeutics by disrupting DNA replication and repair in these highly proliferative cells. PIP-box peptide mimetics have been identified as a potentially rapid route to potent PCNA inhibitors. Here we describe the rational design and synthesis of the first PCNA peptidomimetic ligands, based on the high affinity PIP-box sequence from the natural PCNA inhibitor p21. These mimetics incorporate covalent i,i+4 side-chain/side-chain lactam linkages of different lengths, designed to constrain the peptides into the 3₁₀ -helical structure required for PCNA binding. NMR studies confirmed that while the unmodified p21 peptide had little defined structure in solution, mimetic ACR2 pre-organized into 3₁₀ -helical structure prior to interaction with PCNA. ACR2 displayed higher affinity binding than most known PIP-box peptides, and retains the native PCNA binding mode, as observed in the co-crystal structure of ACR2 bound to PCNA. This study offers a promising new strategy for PCNA inhibitor design for use as anti-cancer therapeutics.

Design of a Short Thermally Stable α-Helix Embedded in a Macrocycle

Although helices play key roles in peptide-protein and protein-protein interactions, the helical conformation is generally unstable for short peptides (10-15 residues) in aqueous solution in the absence of their binding partners. Thus, stabilizing the helical conformation of peptides can lead to increases in binding potency, specificity, and stability towards proteolytic degradation. Helices have been successfully stabilized by introducing side chain-to-side chain crosslinks within the central portion of the helix. However, this approach leaves the ends of the helix free, thus leading to fraying and exposure of the non-hydrogen-bonded amide groups to solvent. Here, we develop a "capped-strapped" peptide strategy to stabilize helices by embedding the entire length of the helix within a macrocycle, which also includes a semirigid organic template as well as end-capping interactions. We have designed a ten-residue capped-strapped helical peptide that behaves like a miniprotein, with a cooperative thermal unfolding transition and Tm ≈70 °C, unprecedented for helical peptides of this length. The NMR structure determination confirmed the design, and X-ray crystallography revealed a novel quaternary structure with implications for foldamer design.

Switching substitution groups on the in-tether chiral centre influences backbone peptides' permeability and target binding affinity

Different substitution groups on the in-tether chiral centre of chirality-induced helical peptides (CIH peptides) showed distinguishable effects on the peptides' cellular uptakes and binding affinities with the estrogen receptor α(ER-α). This study proves that in-tether chiral centres are a valuable modification site for constructing peptide ligands with preferable biophysical properties.