Design and Advanced Manufacturing of NU-1000 Metal-Organic Frameworks with Future Perspectives for Environmental and Renewable Energy Applications

Metal-organic frameworks (MOFs) represent a relatively new family of materials that attract lots of attention thanks to their unique features such as hierarchical porosity, active metal centers, versatility of linkers/metal nodes, and large surface area. Among the extended list of MOFs, Zr-based-MOFs demonstrate comparably superior chemical and thermal stabilities, making them ideal candidates for energy and environmental applications. As a Zr-MOF, NU-1000 is first synthesized at Northwestern University. A comprehensive review of various approaches to the synthesis of NU-1000 MOFs for obtaining unique surface properties (e.g., diverse surface morphologies, large surface area, and particular pore size distribution) and their applications in the catalysis (electro-, and photo-catalysis), CO2 reduction, batteries, hydrogen storage, gas storage/separation, and other environmental fields are presented. The review further outlines the current challenges in the development of NU-1000 MOFs and their derivatives in practical applications, revealing areas for future investigation.

Rational Design of a Zr-MOF@Curli-Polyelectrolyte Hybrid Membrane toward Efficient Chemical Protection, Moisture Permeation, and Catalytic Detoxification

Developing high-performance protective materials is important for soldiers and civilians who are exposed to the atmosphere of highly toxic chemical warfare agents (CWAs). Polyelectrolyte membranes are promising candidates with excellent chemical resistance and moisture permeability, but they cannot efficiently degrade CWAs. Here, we design and prepare a hybrid membrane through in situ growth of catalytically active zirconium-based metal-organic frameworks (Zr-MOFs) on a polyelectrolyte membrane mediated by biofilm-inspired curli nanofibers (CNFs). Superior to the bare polyelectrolyte membrane, the prepared MOF-808@CNF-PQ hybrid membrane exhibits improved rejection of the nerve agent simulant dimethyl methyl phosphonate (DMMP) vapor and permeation of the water vapor by 113 and 45%, respectively. The water/DMMP selectivity of the hybrid membrane reaches 498.6, approximately 13 times that of the commercial polyelectrolyte membrane Nafion 117. In addition, the hybrid membrane possesses appreciable catalytic activity for the hydrolysis of the nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP) with a half-life of ∼38 min. Nanomechanical characterization results based on atomic force microscopy (AFM) techniques demonstrate the critical role of CNFs in mediating Zr-MOF nucleation and the dominant effect of electrostatic interactions on self-assembly of CNFs on polyelectrolyte base. It is also confirmed that the Zr-MOF toppings serve as the key components in physically adsorbing and chemically degrading the DMNP molecules through multiple strong intermolecular interactions. Our work offers a rational strategy to develop advanced membranes toward efficient chemical protection, moisture permeation, and catalytic detoxification against CWAs.

2D MOF with Compact Catalytic Sites for the One‐pot Synthesis of 2,5‐Dimethylfuran from Saccharides via Tandem Catalysis

One pot synthesis of 2,5‐dimethylfuran (2,5‐DMF) from saccharides under mild conditions is of importance for the production of biofuel and fine chemicals. However, the synthesis requires a multitude of active sites and suffers from slow kinetics due to poor diffusion in most composite catalysts. Herein, a metal‐acid functionalized 2D metal‐organic framework (MOF; Pd/NUS‐SO₃H), as an ultrathin nanosheet of 3–4 nm with Lewis acid, Brønsted acid, and metal active sites, was prepared based on the diazo method for acid modification and subsequent metal loading. This new composite catalyst gives substantially higher yields of DMF than all reported catalysts for different saccharides (fructose, glucose, cellobiose, sucrose, and inulins). Characterization suggests that a cascade of reactions including polysaccharide hydrolysis, isomerization, dehydration, and hydrodeoxygenation takes place with rapid molecular interactions.

Combined Deep Learning and Classical Potential Approach for Modeling Diffusion in UiO-66

Modeling of diffusion of adsorbates through porous materials with atomistic molecular dynamics (MD) can be a challenging task if the flexibility of the adsorbent needs to be included. This is because potentials need to be developed that accurately account for the motion of the adsorbent in response to the presence of adsorbate molecules. In this work, we show that it is possible to use accurate machine learning atomistic potentials for metal-organic frameworks in concert with classical potentials for adsorbates to accurately compute diffusivities though a hybrid potential approach. As a proof-of-concept, we have developed an accurate deep learning potential (DP) for UiO-66, a metal-organic framework, and used this DP to perform hybrid potential simulations, modeling diffusion of neon and xenon through the crystal. The adsorbate-adsorbate interactions were modeled with Lennard-Jones (LJ) potentials, the adsorbent-adsorbent interactions were described by the DP, and the adsorbent-adsorbate interactions used LJ cross-interactions. Thus, our hybrid potential allows for adsorbent-adsorbate interactions with classical potentials but models the response of the adsorbent to the presence of the adsorbate through near-DFT accuracy DPs. This hybrid approach does not require refitting the DP for new adsorbates. We calculated self-diffusion coefficients for Ne in UiO-66 from DFT-MD, our hybrid DP/LJ approach, and from two different classical potentials for UiO-66. Our DP/LJ results are in excellent agreement with DFT-MD. We modeled diffusion of Xe in UiO-66 with DP/LJ and a classical potential. Diffusion of Xe in UiO-66 is about a factor of 30 slower than that of Ne, so it is not computationally feasible to compute Xe diffusion with DFT-MD. Our hybrid DP-classical potential approach can be applied to other MOFs and other adsorbates, making it possible to use an accurate DP generated from DFT simulations of an empty adsorbent in concert with existing classical potentials for adsorbates to model adsorption and diffusion within the porous material, including adsorbate-induced changes to the framework.

Environmentally Benign Biosynthesis of Hierarchical MOF/Bacterial Cellulose Composite Sponge for Nerve Agent Protection

The fabrication of MOF polymer composite materials enables the practical applications of MOF-based technology, in particular for protective suits and masks. However, traditional production methods typically require organic solvent for processing which leads to environmental pollution, low-loading efficiency, poor accessibility, and loss of functionality due to poor solvent resistance properties. For the first time, we have developed a microbial synthesis strategy to prepare a MOF/bacterial cellulose nanofiber composite sponge. The prepared sponge exhibited a hierarchically porous structure, high MOF loading (up to ≈90 %), good solvent resistance, and high catalytic activity for the liquid- and solid-state hydrolysis of nerve agent simulants. Moreover, the MOF/ bacterial cellulose composite sponge reported here showed a nearly 8-fold enhancement in the protection against an ultra-toxic nerve agent (GD) in permeability studies as compared to a commercialized adsorptive carbon cloth. The results shown here present an essential step toward the practical application of MOF-based protective gear against nerve agents.

A Ce-MOF as an alkaline phosphatase mimic: Ce-OH2 sites in catalytic dephosphorylation

For the first time, a metal–organic framework (Ce-MOF) bearing a Ce–OH2–Ce motif was used to mimic the active sites of alkaline phosphatase.

In-situ detoxification of schedule-I chemical warfare agents utilizing Zr(OH)4@W-ACF functional material for the development of next generation NBC protective gears

Chemical warfare agents (CWAs) have become a pivotal concern for the global community and spurred a wide spectrum of research for the development of new generation protective materials. Herein, a highly effective self-detoxifying filter consisting of in-situ immobilized Zirconium hydroxide [Zr(OH)4] over woven activated carbon fabric [Zr(OH)4@W-ACF] is presented for the removal of CWAs. It was prepared to harness the synergistic effect of high surface area of W-ACF, leads to high dispersion of CWAs and high phosphilicity and reactivity of [Zr(OH)4]. The synthesized materials were characterized by ATR-FTIR, EDX, SEM, TEM, XPS, TGA, and BET surface area analyzer. The kinetics of  in-situ degradation of CWAs over Zr(OH)4@W-ACF were studied and found to be following the first-order reaction kinetics. The rate constant was found to be 0.244 min-1 and 2.31 × 10-2 min-1 for sarin and soman, respectively over Zr(OH)4@W-ACF. The potential practical applicability of this work was established by fabricating Zr(OH)4@W-ACF as reactive adsorbent layer for protective suit, and found to be meeting the specified criteria in terms of air permeability, tearing strength and nerve agent permeation as per TOP-08-2-501A:2013 and IS-17380:2020. The degradation products of CWAs were analyzed with NMR and GC-MS. The combined properties of dual functional textile with reactive material are expected to open up new exciting avenues in the field of CWAs protective clothing and thus find diverse application in defence and environmental sector.

Selective and Sensitive Fluorescence Turn-On Detection of Cyanide Ions in Water by Post Metallization of a MOF

Owing to detrimental impact of cyanide ion (CN^- ) towards the entire living system as well as its availability in drinking water, it has become very important developing potential sensory materials for the selective and sensitive recognition of CN^- ions in water. In the domain of sensory materials, luminescent metal-organic frameworks (LMOFs) have been considered as a promising candidate owing to their unique host-guest interaction, where MOFs can serve as an ideal scaffold for encapsulating relevant guest molecules rendering specific functionality. In this study, a post-synthetically modified MOF (viz., CuCl₂ @MOF-867) was applied to recognize cyanide (CN^- ) ions in water via "turn-on" response. The bipyridyl functionalities in MOF-867 were used to perform post-synthetic metalation to infiltrate CuCl₂ inside porous architecture of the MOF. Moreover, a CuCl₂ @MOF-867 based probe demonstrated highly selective and sensitive aqueous phase recognition of CN^- ions even in the presence of other interfering anions such as Br^- , NO₃ ^- , I^- , SO₄ ^2- , OAc^- , SCN^- , NO₂ ^- , etc. The selective binding of CN^- ions to the copper-metal center has led to the generation of stable Cu(CN)₂ species. This phenomenon has further resulted in a fluorescence turn-on response. The aqueous phase cyanide detection by the rationally modified MOF system exhibited very low limit of detection (0.19 μM), which meets the standardized limit stated by World Health Organization (WHO) that is 1.9 μM.

Molecular Recognition of Nerve Agents and Their Organophosphorus Surrogates: Toward Supramolecular Scavengers and Catalysts

Nerve agents are tetrahedral organophosphorus compounds (OPs) that were developed in the last century to irreversibly inhibit acetylcholinesterase (AChE) and therefore impede neurological signaling in living organisms. Exposure to OPs leads to a rapid development of symptoms from excessive salivation, nasal congestion and chest pain to convulsion and asphyxiation which if left untreated may lead to death. These potent toxins are prepared on a large scale from inexpensive staring materials, making it feasible for terrorist groups or states to use them against military and civilians. The existing antidotes provide limited protection and are difficult to apply to a large number of affected individuals. While new prophylactics are currently being developed, there is still need for therapeutics capable of both preventing and reversing the effects of OP poisoning. In this review, we describe how the science of molecular recognition can expand the pallet of tools for rapid and safe sequestration of nerve agents.

Advances of the highly efficient and stable visible light active photocatalyst Zr(IV)-phthalate coordination polymer for the degradation of organic contaminants in water

This work presents the restoration of the Zr-phthalate coordination polymer (Zr-Ph CP) via valuable application in photocatalysis. Zr-Ph CP was facilely synthesized using a soft hydrothermal method at 70 °C, and was characterized utilizing FTIR, Raman Spectrosopy, XPS, PXRD, SEM/EDX, BET, and a hyperspectral camera. Assessment of its photocatalytic degradation potential was performed against two different dyes, the cationic methylene blue (MB) and the anionic methyl orange (MO), as frequent models of organic contaminants, under properly selected mild visible illumination (9 W) where the bandgap energy (Eg) was determined to be 2.72 eV. Effects of different initial pH values and different dyes' initial concentrations were covered. Photocatalytic degradation studies showed that Zr-Ph CP effectively degraded both dyes for initial pH 7 within about 40-60 minutes. Degradation rate constants were calculated as 0.17 and 0.13 min-1 for MB and MO, respectively. Generally, both direct and indirect mechanisms share in the degradation, where adsorption has shown an important role. The repeated use of Zr-Ph CP does not significantly affect its photocatalytic performance suggesting high water stability.

Tuning the Properties of MOF-808 via Defect Engineering and Metal Nanoparticle Encapsulation

Defect engineering and metal encapsulation are considered as valuable approaches to fine‐tune the reactivity of metal–organic frameworks. In this work, various MOF‐808 (Zr) samples are synthesized and characterized with the final aim to understand how defects and/or platinum nanoparticle encapsulation act on the intrinsic and reactive properties of these MOFs. The reactivity of the pristine, defective and Pt encapsulated MOF‐808 is quantified with water adsorption and CO₂ adsorption calorimetry. The results reveal strong competitive effects between crystal morphology and missing linker defects which in turn affect the crystal morphology, porosity, stability, and reactivity. In spite of leading to a loss in porosity, the introduction of defects (missing linkers or Pt nanoparticles) is beneficial to the stability of the MOF‐808 towards water and could also be advantageously used to tune adsorption properties of this MOF family.

Function-Topology Relationship in the Catalytic Hydrolysis of a Chemical Warfare Simulant in Two Zr-MOFs

Owing to their high surface area, high concentration of active metal sites, and water stability, zirconium(VI)-based metal-organic frameworks (Zr-MOFs) have shown excellent activity in the hydrolysis of organophosphorus nerve agents (OPNs). In this regard, for the first time, two topologically different Zr-MOFs (Zr-fcu-tmuc and Zr-bcu-tmuc, constructed from the same organic and inorganic building blocks; fcu=face-centered cubic, bcu=body-centered cubic) have been rationally chosen to investigate the effect of network topology on the catalytic hydrolysis of the nerve agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP). A remarkable enhancement in the hydrolysis rate of DMNP was observed with Zr-bcu-tmuc, reducing the half-life more than three-fold compared with Zr-fcu-tmuc. Greater accessibility of the active Zr^VI sites in the 8-connected bcu net compared with the 12-connected fcu leads to a faster hydrolysis of DMNP on Zr-bcu-tmuc. Interestingly, the higher activity of Zr-bcu-tmuc was also confirmed by its higher fluorescence sensitivity towards DMNP (limit of detection (LOD)=0.557 μm) compared with Zr-fcu-tmuc (LOD=1.09 μm). The results show that controlling the desired topology of Zr-MOFs is a useful strategy for improving their performance in the detection and catalytic detoxification of OPNs.

Intrinsic Apyrase-Like Activity of Cerium-Based Metal-Organic Frameworks (MOFs): Dephosphorylation of Adenosine Tri- and Diphosphate

Apyrase is an important family of extracellular enzymes that catalyse the hydrolysis of high-energy phosphate bonds (HEPBs) in ATP and ADP, thereby modulating many physiological processes and driving life activities. Herein, we report an unexpected discovery that cerium-based metal-organic frameworks (Ce-MOFs) of UiO-66(Ce) have intrinsic apyrase-like activity for ATP/ADP-related physiological processes. The abundant Ce^III /Ce^IV couple sites of Ce-MOFs endow them with the ability to selectively catalyse the hydrolysis of HEPBs of ATP and ADP under physiological conditions. Compared to natural enzymes, they could resist extreme pH and temperature, and present a broad range of working conditions. Based on this finding, a significant inhibitory effect on ADP-induced platelet aggregation was observed upon exposing the platelet-rich plasma (PRP) to the biomimetic UiO-66(Ce) films, prefiguring their wide application potentials in medicine and biotechnology.

Evolution of a Metal-Organic Framework into a Brønsted Acid Catalyst for Glycerol Dehydration to Acrolein

Metal-organic frameworks (MOFs) as solid acid catalysts provide active sites with definite structures. Here, Zr₆ -based MOF-808 and its derivatives were studied as catalysts for glycerol dehydration, the products of which (acrolein vs. acetol) are very sensitive to the nature of the catalytic acid sites. Evolving MOF-808 into MOF-808-S with a 120 % increase in the number of Brønsted OH^- /H₂ O coordinated to Zr^IV and a vanished Lewis acidity by steam treatment, the post-synthetically modified catalyst presented 100 % conversion of glycerol, 91 % selectivity to acrolein, and 0 % selectivity to acetol within the active window. Real-time analysis of the product composition indicated the in situ MOF structural evolution. Overall, the specific MOF-substrate interaction characterized by the probe reaction provides more understandings on the structural evolution of the MOFs and their impact on the performance as solid acid catalysts.

Spray-Coating of Catalytically Active MOF-Polythiourea through Postsynthetic Polymerization

A UiO-66-NCS MOF was formed by postsynthetic modification of UiO-66-NH₂ . The UiO-66-NCS MOFs displays a circa 20-fold increase in activity against the chemical warfare agent simulant dimethyl-4-nitrophenyl phosphate (DMNP) compared to UiO-66-NH₂ , making it the most active MOF materials using a validated high-throughput screening. The -NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine-terminated polypropylene polymers (Jeffamines) through a facile room-temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF-polythiourea (MOF-PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF-PTU hybrid material was spray-coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray-coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.

Coordination-Cage-Catalysed Hydrolysis of Organophosphates: Cavity- or Surface-Based?

The hydrophobic central cavity of a water-soluble M8 L12 cubic coordination cage can accommodate a range of phospho-diester and phospho-triester guests such as the insecticide "dichlorvos" (2,2-dichlorovinyl dimethyl phosphate) and the chemical warfare agent analogue di(isopropyl) chlorophosphate. The accumulation of hydroxide ions around the cationic cage surface due to ion-pairing in solution generates a high local pH around the cage, resulting in catalysed hydrolysis of the phospho-triester guests. A series of control experiments unexpectedly demonstrates that-in marked contrast to previous cases-it is not necessary for the phospho-triester substrates to be bound inside the cavity for catalysed hydrolysis to occur. This suggests that catalysis can occur on the exterior surface of the cage as well as the interior surface, with the exterior-binding catalysis pathway dominating here because of the small binding constants for these phospho-triester substrates in the cage cavity. These observations suggest that cationic but hydrophobic surfaces could act as quite general catalysts in water by bringing substrates into contact with the surface (via the hydrophobic effect) where there is also a high local concentration of anions (due to ion pairing/electrostatic effects).

Screening for Improved Nerve Agent Simulants and Insights into Organophosphate Hydrolysis Reactions from DFT and QSAR Modeling

The effective detoxification of chemical warfare agents, specifically nerve agents, is a pressing issue in the modern world. Due to the high toxicity of these molecules, simulants are often used in experiments as substitutes for the agents. However, there is little reason to believe that the current simulants used in the literature are optimal predictors of nerve agent reactivity. Density functional theory calculations were performed on the alkaline hydrolysis of over 100 organophosphate molecules to identify improved simulants for the G-series nerve agents soman and sarin, based on low toxicity and similarity to nerve agent hydrolysis energetics and degradation mechanism. This screening highlighted 5 molecules that have nearly identical reaction barriers to the actual agents, while being far less toxic. Quantitative structure-activity relationship (QSAR) models were also derived to determine the most significant molecular descriptors for describing the hydrolysis free energy barriers of these reactions. The optimal QSAR model was subjected to a thorough statistical analysis and validation procedure to confirm its predictive capacity, showing excellent quantitative and ranking accuracy. It was further shown that the model trained on G-series agents can reliably predict energetics for other organophosphate classes as well, including VX. Through these computational insights, experimentalists may be aided in accurately and safely studying these reactions with less toxic simulants.

Geminal Coordinatively Unsaturated Sites on MOF-808 for the Selective Uptake of Phenolics from a Real Bio-Oil Mixture

The capping formate anions of the metal-organic framework (MOF) zirconium benzene-1,3,5-tricarboxylate (MOF-808) were removed by a solvent exchange procedure, resulting in a formate-free MOF-808 sample containing "geminal" defects consisting of six coordinatively unsaturated sites (CUSs) on each of the Zr₆ nodes. Adsorption experiments with this material showed that the uptake of 4-methylguaiacol from a bio-oil mixture was proportional to the number of defects and amounted to one mole adsorbed per mole of zirconium. The selective uptake behavior of MOF-808 towards phenolic compounds was further evident from competitive adsorption experiments between furfuryl alcohol and 4-methylguaiacol as well as from the excellent (20 wt % for phenolic compounds and <7 wt % for other compounds) uptake performance for real bio-oil mixtures containing a large concentration and diversity of molecules.

A Polyoxoniobate-Polyoxovanadate Double-Anion Catalyst for Simultaneous Oxidative and Hydrolytic Decontamination of Chemical Warfare Agent Simulants

A novel double-anion complex, H₁₃ [(CH₃ )₄ N]₁₂ [PNb₁₂ O₄₀ (V^V O)₂ ⋅(V^IV₄ O₁₂ )₂ ]⋅22 H₂ O (1), based on bicapped polyoxoniobate and tetranuclear polyoxovanadate was synthesized, characterized by routine techniques and used in the catalytic decontamination of chemical warfare agents. Under mild conditions, 1 catalyzes both hydrolysis of the nerve agent simulant, diethyl cyanophosphonate (DECP) and selective oxidation of the sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES). In the oxidative decontamination system 100 % CEES was transformed selectively to nontoxic 2-chloroethyl ethyl sulfoxide and vinyl ethyl sulfoxide using nearly stoichiometric 3 % aqueous H₂ O₂ with a turnover frequency (TOF) of 16 000 h^-1 . Importantly, the catalytic activity is maintained even after ten recycles and CEES is completely decontaminated in 3 mins without formation of the highly toxic sulfone by-product. A three-step oxidative mechanism is proposed.