Mixed‐Matrix‐Membranen

Postsynthetically Modified Alkoxide-Exchanged Ni2(OR)2BTDD: Synergistic Interactions of CO2 with Open Metal Sites and Functional Groups

Postsynthetic modifications (PSMs) of metal-organic frameworks (MOFs) play a crucial role in enhancing material performance through open metal site (OMS) functionalization or ligand exchange. However, a significant challenge persists in preserving open metal sites during ligand exchange, as these sites are inherently bound by incoming ligands. In this study, for the first time, we introduced alkoxides by exchanging bridging chloride in Ni2Cl2BTDD (BTDD=bis (1H-1,2,3,-triazolo [4,5-b],-[4',5'-i]) dibenzo[1,4]dioxin) through PSM. Rietveld refinement of synchrotron X-ray diffraction data indicated that the alkoxide oxygen atom bridges Ni(II) centers while the OMSs of the MOF are preserved. Due to the synergy of the existing OMS and introduced functional group, the alkoxide-exchanged MOFs showed CO2 uptakes superior to the pristine MOF. Remarkably, the tert-butoxide-substituted Ni_T exhibited a nearly threefold and twofold increase in CO2 uptake compared to Ni2Cl2BTDD at 0.15 and 1 bar, respectively, as well as high water stability relative to the other exchanged frameworks. Furthermore, the Grand Canonical Monte Carlo simulations for Ni_T suggested that CO2 interacts with the OMS and the surrounding methyl groups of tert-butoxide groups, which is responsible for the enhanced CO2 capacity. This work provides a facile and unique synthetic strategy for realizing a desirable OMS-incorporating MOF platform through bridging ligand exchange.

Amidoxime Modified UiO-66@PIM-1 Mixed-Matrix Membranes to Enhance CO2 Separation and Anti-Aging Performance

Mixed matrix membranes (MMMs) generally have some fatal defects, such as poor compatibility between the two phases leading to non-selective pores. In this work, PIM-1 was chosen as the polymer matrix, and UiO-66 modified with amidoxime (UiO-66-AO) was used as the filler to prepare the MMMs. In the MMMs, the amino and hydroxyl groups on UO-66-AO form a rich hydrogen bond network with the N and O atoms in the polymer PIM-1 chain to improve the compatibility between the polymer matrix and the filler. In addition, the selective adsorption of CO2 by the amidoxime group can promote the transport of CO2 in the membrane, which enhances the gas selectivity. The CO2 permeability and CO2/N2 selectivity of UiO-66-AO@PIM-1 MMMs are increased by 35.2% and 45.2% compared to pure PIM-1 membranes, reaching 7535.5 Barrer and 26.9, surpassing the Robeson Upper Bound (2008) and close to the 2019 Upper Bound. After 38 days of the aging experiment, the CO2 permeability is approximately 74% of the original. The results show that the addition of UiO-66-AO has an obvious effect on improving the aging properties of the membrane. The UiO-66-AO@PIM-1 MMMs have a bright prospect for CO2 separation in the future.

Robust Proton Conduction against Mechanical Stress in Flexible Free-Standing Membrane Composed of Two-Dimensional Coordination Polymer

Introduction of mechanical flexibility into proton-conducting coordination polymers (CPs) is in high demand for future protonic applications such as fuel cells and hydrogen sensors. Although such mechanical properties have been primarily investigated in one-dimensional (1D) CPs, in this study, we successfully fabricated highly flexible free-standing CP membranes with a high surface-to-volume ratio, which is beneficial for enhanced performance in the aforementioned applications. We fabricated a layered CP, Cu2 (NiTCPP) (H4 (H2 TCPP); 5,10,15,20-tetrakis(4-carboxyphenyl) porphyrin), in which a two-dimensional (2D) square grid sheet composed of tetradentate nickel porphyrins and paddlewheel-type copper dimers was connected to each other by weak van der Waals forces. The mechanical flexibility was evaluated by bending and tensile tests. The flexural and Young's moduli of the membrane were significantly higher than those of conventional Nafion membranes. Electrochemical impedance spectroscopy analysis revealed that the in-plane proton conductivity of the membrane was maintained even under applied bending stress. Because the X-ray diffraction analysis indicates that the proton-conducting pathway through the hydrogen bonding network remains intact during the bending operation, our present study provides a promising strategy for the fabrication of new and advanced 2D CPs without using substrates or additional polymers for protonic devices.

Ultramicroporous Covalent Organic Framework Nanosheets with Functionality Pair for Membrane C2 H2 /C2 H4 Separation

Gas separation efficiency of covalent organic framework (COF) membrane can be greatly elevated through precise functionalization. A pair-functionalized COF membrane of 1,3,5-triformylphloroglucinol (TP) and isoquinoline-5,8-diamine (IQD) monomers in two and three nodes is designed and synthesized. TP-IQD is crystallized in a two-dimensional structure with a pore size of 6.5 Å and a surface area of 289 m²  g^-1 . This COF possesses N-O paired groups which cooperatively interact with C₂ H₂ instead of C₂ H₄ . TP-IQD nanosheets of ≈10 μm in width and ≈4 nm in thickness are prepared by mechanical exfoliation; they are further processed with 6FDA-ODA polymer into a hybrid membrane. High porosity and functionality pair of TP-IQD offer the membrane with significantly increased C₂ H₂ permeability and C₂ H₂ /C₂ H₄ selectivity which are 160 % and 430 % higher of pure 6FDA-ODA. The boosted performance demonstrates high efficiency of the pair-functionality strategy for the synthesis of separation-led COFs.

Constructing Mechanical Shuttles in a Three-dimensional (3D) Porous Architecture for Selective Transport of Lithium Ions

Lithium (Li) extraction from brines is a major barrier to the sustainable development of batteries and alloys; however, current separation technology suffers from a trade-off between ion selectivity and permeability. Herein, a crown ether mechanically interlocked 3D porous organic framework (Crown-POF) was prepared as the porous filler of thin-film nanocomposite membranes. Crown-POF with penta-coordinated (four O_crown atoms and one N_tert-amine atom) adsorption sites enables a special recognition for Li⁺ ion. Moreover, the four N_tert-amine atoms on each POF branch facilitate the flipping motion of Li⁺ ion along the skeletal thread, while retaining the specified binding pattern. Accordingly, the crown ether interlocked POF network displays an ultrafast ion transfer rate, over 10 times that of the conventional porous materials. Notably, the nanocomposite membrane gives high speed and selectivity for Li⁺ ion transport as compared with other porous solid-based mixed-matrix membranes.

CO2 Separation by Imide/Imine Organic Cages

Two novel imide/imine-based organic cages have been prepared and studied as materials for the selective separation of CO2 from N2 and CH4 under vacuum swing adsorption conditions. Gas adsorption on the new compounds showed selectivity for CO2 over N2 and CH4 . The cages were also tested as fillers in mixed-matrix membranes for gas separation. Dense and robust membranes were obtained by loading the cages in either Matrimid® or PEEK-WC polymers. Improved gas-transport properties and selectivity for CO2 were achieved compared to the neat polymer membranes.

Potential Applications of Nickel-Based Metal-Organic Frameworks and their Derivatives

Metal-Organic Frameworks (MOFs), a novel class of porous extended crystalline structures, are favored in different fields of heterogeneous catalysis, CO₂ separation and conversion, and energy storage (supercapacitors) due to their convenience of synthesis, structural tailor-ability, tunable pore size, high porosity, large specific surface area, devisable structures, and adjustable compositions. Nickel (Ni) is a ubiquitous element extensively applied in various fields of catalysis and energy storage due to its low cost, high abundance, thermal and chemical stability, and environmentally benign nature. Ni-based MOFs and their derivatives provide us with the opportunity to modify different properties of the Ni center to improve their potential as heterogeneous catalysts or energy storage materials. The recent achievements of Ni-MOFs and their derivatives as catalysts, membrane materials for CO₂ separation and conversion, electrode materials and their respective performance have been discussed in this review.

Continuous Porous Aromatic Framework Membranes with Modifiable Sites for Optimized Gas Separation

Continuous microporous membranes are widely studied for gas separation, due to their low energy premium and strong molecular specificity. Porous aromatic frameworks (PAFs) with their exceptional stability and structural flexibility are suited to a wide range of separations. Main-stream PAF-based membranes are usually prepared with polymeric matrices, but their discrete entities and boundary defects weaken their selectivity and permeability. The synthesis of continuous PAF membranes is still a major challenge because PAFs are insoluble. Herein, we successfully synthesized a continuous PAF membrane for gas separation. Both pore size and chemistry of the PAF membrane were modified by ion-exchange, resulting in good selectivity and permeance for the gas mixtures H₂ /N₂ and CO₂ /N₂ . The membrane with Br^- as a counter ion in the framework exhibited a H₂ /N₂ selectivity of 72.7 with a H₂ permeance of 51844 gas permeation units (GPU). When the counter ions were replaced by BF₄ ^- , the membrane showed a CO₂ permeance of 23058 GPU, and an optimized CO₂ /N₂ selectivity of 60.0. Our results show that continuous PAF membranes with modifiable pores are promising for various gas separation situations.

Synthesis and Mechanical Properties of sub 5-µm PolyUiO-66 Thin Films on Gold Surfaces

Metal-organic framework (MOF) thin films currently lack the mechanical stability needed for electronic device applications. Polymer-based metal-organic frameworks (polyMOFs) have been suggested to provide mechanical advantages over MOFs, however, the mechanical properties of polyMOFs have not yet been characterized. In this work, we developed a method to synthesize continuous sub-5 µm polyUiO-66(Zr) films on Au substrates, which allowed us to undertake initial mechanical property investigations.  Comparisons between polyUiO-66 and UiO-66 thin films determined polyUiO-66 thin films exhibit a lower modulus but similar hardness to UiO-66 thin films. The initial mechanical characterization indicates that further development is needed to leverage the mechanical property advantages of polyMOFs over MOFs. Additionally, the demonstration in this work of a continuous surface-supported polyUiO-66 thin film also enables utilization of the emerging class of polyMOF materials in sensors and devices applications.

Progress in Multifunctional Metal-Organic Frameworks/Polymer Hybrid Membranes

The fabrication of state-of-the-art membranes with customized functions and high efficiency is of great significance, but presents challenges. Emerging metal-organic frameworks (MOFs)/polymer hybrid membranes have provided bright promise as an innovative platform to target multifunctional hybrid materials and devices; this is thanks to their unique properties, which come from three components that are collaboratively enforced. This minireview provides a brief overview of recent progress in the construction of such hybrid membranes, and highlights some of their very important applications in separation, conduction, and sensing.

Isoreticular Crystallization of Highly Porous Cubic Covalent Organic Cage Compounds*

Modular frameworks featuring well-defined pore structures in microscale domains establish tailor-made porous materials. For open molecular solids however, maintaining long-range order after desolvation is inherently challenging, since packing is usually governed by only a few supramolecular interactions. Here we report on two series of nanocubes obtained by co-condensation of two different hexahydroxy tribenzotriquinacenes (TBTQs) and benzene-1,4-diboronic acids (BDBAs) with varying linear alkyl chains in 2,5-position. n-Butyl groups at the apical position of the TBTQ vertices yielded soluble model compounds, which were analyzed by mass spectrometry and NMR spectroscopy. In contrast, methyl-substituted cages spontaneously crystallized as isostructural and highly porous solids with BET surface areas and pore volumes of up to 3426 m2  g-1 and 1.84 cm3  g-1 . Single crystal X-ray diffraction and sorption measurements revealed an intricate cubic arrangement of alternating micro- and mesopores in the range of 0.97-2.2 nm that are fine-tuned by the alkyl substituents at the BDBA linker.

Single-Phase Covalent Organic Framework Staggered Stacking Nanosheet Membrane for CO2 -Selective Separation

Two-dimensional covalent organic frameworks (2D COFs) are considered as potential candidates for gas separation membranes, benefiting from permanent porosity, light-weight skeletons, excellent stability and facilely-tailored functionalities. However, their pore sizes are generally larger than the kinetic diameters of common gas molecules. One great challenge is the fabrication of single-phase COF membranes to realize precise gas separations. Herein, three kinds of high-quality β-ketoenamine-type COF nanosheets with different pore sizes were developed and aggregated to ultrathin nanosheet membranes with distinctive staggered stacking patterns. The narrowed pore sizes derived from the micro-structures and selective adsorption capacities synergistically endowed the COF membranes with intriguing CO₂ -philic separation performances, among which TpPa-2 with medium pore size exhibited an optimal CO₂ /H₂ separation factor of 22 and a CO₂ permeance of 328 gas permeation units at 298 K. This membrane performance reached the target with commercial feasibility for syngas separations.

Coating the Right Polymer: Achieving Ideal Metal-Organic Framework Particle Dispersibility in Polymer Matrixes Using a Coordinative Crosslinking Surface Modification Method

This work describes the first generalizable method to modify various metal-organic framework (MOF) surfaces with polyimide, polysulfone, polycarbonate, and polymer of intrinsic microporosity-1 (PIM-1). The method first utilizes electrostatic adsorption to rapidly decorate positively charged MOF surfaces with a layer of negatively charged metal-organic nanocapsule, PgC₅ Cu. After mixing with the polymer, the copper open metal sites on PgC₅ Cu can coordinatively crosslink the polar functional groups on the surface polymer upon thermal activation thereby resulting in the immobilization of a uniform sub-10 nm polymer coating. We quantitatively analyzed the distribution of free path spacing between MOF particles and demonstrated that when the surface polymer matches the matrix polymer, the MOF dispersion was not only visually improved but also found to align perfectly with a theoretically predicted ideal dispersion model where no aggregation driving force was present.

"Host in Host" Supramolecular Core-Shell Type Systems Based on Giant Ring-Shaped Polyoxometalates

Herein, we show how the chaotropic effect arising from reduced molybdate ions in acidified aqueous solution is able to amplify drastically weak supramolecular interactions. Time-resolved Small Angle X-ray Scattering (SAXS) analysis suggests that molybdenum-blue oligomeric species form huge aggregates in the presence of γ-cyclodextrin (γ-CD) which results in the fast formation of nanoscopic {Mo₁₅₄ }-based host-guest species, while X-ray diffraction analysis reveals that the ending-point of the scenario results in an unprecedented three-component well-ordered core-shell-like motif. A similar arrangement was found by using preformed hexarhenium chalcogenide-type cluster [Re₆ Te₈ (CN)₆ ]^4- as exogenous guest. This seminal work brings better understanding of the self-assembly processes in general and gives new opportunities for practical applications in the design of complex multicomponent materials via the simplicity of the non-covalent chemistry.

Encapsulation of a Porous Organic Cage into the Pores of a Metal-Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient-wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO2 affinity were successfully encapsulated into the nanospace of Cr-based MIL-101 while retaining the crystal framework, morphology, and high stability of MIL-101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL-101, more affinity sites for CO2 are created in the resulting CB6@MIL-101 composites, leading to enhanced CO2 uptake capacity and CO2 /N2 , CO2 /CH4 separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.

A Spiderweb-Like Metal-Organic Framework Multifunctional Foam

Processing metal-organic frameworks (MOFs) into hierarchical macroscopic materials can greatly extend their practical applications. However, current strategies suffer from severe aggregation of MOFs and limited tuning of the hierarchical porous network. Now, a strategy is presented that can simultaneously tune the MOF loading, composition, spatial distribution, and confinement within various bio-originated macroscopic supports, as well as control the accessibility, robustness, and formability of the support itself. This method enables the good dispersion of individual MOF nanoparticles on a spiderweb-like network within each macrovoid even at high loadings (up to 86 wt %), ensuring the foam pores are highly accessible for excellent adsorption and catalytic capacity. Additionally, this approach allows the direct pre-incorporation of other functional components into the framework. This strategy provides precise control over the properties of both the hierarchical support and MOF.

Synthesis of novel Co(ii) complexed bipyrimidine polyimide and preparation of thin film composite membranes

A systematic study was carried out on the effect of the polyimide complexed with Co²⁺ as the selective layer of thin film composite membranes on gas separation.

The Ultrafast and Continuous Fabrication of a Polydimethylsiloxane Membrane by Ultraviolet-Induced Polymerization

The polydimethylsiloxane (PDMS) membrane commonly used for separation of biobutanol from fermentation broth fails to meet demand owing to its discontinuous and polluting thermal fabrication. Now, an UV-induced polymerization strategy is proposed to realize the ultrafast and continuous fabrication of the PDMS membrane. UV-crosslinking of synthesized methacrylate-functionalized PDMS (MA-PDMS) is complete within 30 s. The crosslinking rate is three orders of magnitude larger than the conventional thermal crosslinking. The MA-PDMS membrane shows a versatile potential for liquid and gas separations, especially featuring an excellent pervaporation performance for n-butanol. Filler aggregation, the major bottleneck for the development of high-performance mixed matrix membranes (MMMs), is overcome, because the UV polymerization strategy demonstrates a freezing effect towards fillers in polymer, resulting in an extremely high-loading silicalite-1/MA-PDMS MMM with uniform particle distribution.

Highly Cation Permselective Metal-Organic Framework Membranes with Leaf-Like Morphology

Highly cation permselective metal-organic framework (MOF) membranes are desirable for the extraction of valuable metal cations. However, fabrication of defect-free and stable permselective MOF membranes is technically challenging, owing to their arduous self-assembly and poor water resistance, respectively. A simple and readily scalable method has been developed for the controlled in situ smart growth of UiO-66-NH₂ into leaf-like nanostructures with tunable density of the leaves and the surface layer thickness. The self-assembly approach reproducibly fabricates seamless, ultrathin (<500 nm) UiO-66-NH₂ membranes at the surface of anodic aluminum oxide. The membranes contain nanosized interstices among the MOF leaves, which enable maximum admission of ions within the membrane, and angstrom-sized inherent pores in every single UiO-66-NH₂ crystal, which efficiently regulate the cation permselectivity. Consequently, the highest ever reported cation separations (Na⁺ /Mg²⁺ >200 and Li⁺ /Mg²⁺ >60) and excellent membrane stability during five sequential electrodialysis cycles are achieved. These characteristics position the fabricated MOF membranes as potential candidates for efficient extraction of pure lithium and sodium ions from salt lakes and seawater, respectively.

In Situ Assembly of a Zeolite Imidazolate Framework Hybrid Thin-Film Nanocomposite Membrane with Enhanced Desalination Performance Induced by Noria-Polyethyleneimine Codeposition

Zeolite imidazolate framework-8 (ZIF-8) has emerged as an excellent candidate for the preparation of thin-film nanocomposite (TFN) membranes. Nevertheless, it still remains a great challenge to make the effective incorporation of ZIF-8 into the resulting TFN membrane feasible for facile application. Herein, we propose an in situ strategy to fabricate a ZIF-8 nanocrystal hybrid reverse osmosis membrane induced by the ultrafast surface modification of Noria-polyethyleneimine codeposition. By this method, ZIF-8 nanocubes with monodispersity were first formed on a modified support through the step-by-step deposition of precursor solutions. Afterward, a TFN membrane was fabricated by interfacial polymerization (IP) on a ZIF-8 loaded support. Due to the significantly altered IP process induced by the coexistence of Noria and ZIF-8 on the support surface, the TFN membrane depicts a distinct nanostrand-nanoparticle hybrid morphology, which endows the TFN membrane with excellent antifouling ability. Moreover, the permeance of the as-fabricated TFN membrane is up to 3.64 L·m^-2·h^-1·bar^-1, nearly 2.7-fold higher than that of the nascent membrane, while it still maintains a high rejection toward NaCl. The in situ assembly strategy reported here could also pave a promising way for the fabrication of TFN membranes with other nanomaterials in future.

A Self-Folding Polymer Film Based on Swelling Metal-Organic Frameworks

Herein, we exploit the well-known swelling behaviour of metal-organic frameworks (MOFs) to create a self-folding polymer film. Namely, we show that incorporating crystals of the flexible MOF MIL-88A into a polyvinylidene difluoride (PVDF) matrix affords a polymer composite film that undergoes reversible shape transformations upon exposure to polar solvents and vapours. Since the self-folding properties of this film correlate directly with the swelling properties of the MIL-88A crystals, it selectively bends to certain solvents and its degree of folding can be controlled by controlling the relative humidity. Moreover, it shows a shape-memory effect at relative humidity values from 60 % to 90 %. As proof of concept, we demonstrate that these composite films can lift cargo and can be used to assemble 3D structures from 2D patterns. Our strategy is a straightforward method for designing autonomous soft materials with folding properties that can be tuned by judicious choice of the constituent flexible MOF.