Layered Double Hydroxide Nanosheets with Multiple Vacancies Obtained by Dry Exfoliation as Highly Efficient Oxygen Evolution Electrocatalysts

Empowering the Water Oxidation Activity of the Bimetallic Metal-Organic Framework by Annexing Gold Nanoparticles over the Catalytic Surface

Electrocatalytic water splitting to an anodic oxygen evolution reaction (OER) and a cathodic hydrogen evolution reaction (HER) is believed to be the most important application for sustainable hydrogen generation. Being a four-electron, four-proton transfer process, the OER plays the main obstacle for the same. Therefore, designing an effective electrocatalyst to minimize the activation energy barrier for the OER is a research topic of prime importance. The metal-organic framework (MOF) with a highly porous network is considered an appropriate candidate for the OER in alkaline conditions. Apart from several MOFs, the bimetallic one has an advantageous electrocatalytic performance due to the synergistic electronic interaction between two metal ions. However, most bimetallic MOFs have an obstacle to electrocatalytic application due to their low conductive nature, and therefore, they possess a barrier for charge transfer kinetics at the interface. Surface functionalization via various nanoparticles (NPs) is believed to be the most effective strategy for nullifying the conductive issue. In this work, we have designed a CoNi-based bimetallic MOF that was surface-functionalized by Au NPs (Au@CoNi-Bpy-BTC) for the OER under alkaline conditions. Au@CoNi-Bpy-BTC required an overpotential of just 330 mV, which is 56 mV lower as compared to the pristine MOF. Impedance analysis confirms an improved conductivity and charge transfer at the interface, where Au@CoNi-Bpy-BTC possesses a lower Rct value than CoNi-Bpy-BTC materials. Moreover, the Au-decorated MOF shows an 8.5 times increase in the TOF value compared to the pristine MOF. Therefore, this noble strategy toward the surface functionalization of MOFs via noble metal NPs is believed to be the most effective strategy for developing effective electrocatalysts for electrocatalytic application in energy-related fields. Overall, this report displays an exceptional correlation between the decorated NPs over the MOF surface, which can regulate the OER activity, as confirmed by experimental analysis.

NiFe-Coordination Polymers-Derived Layered Double Hydroxides as Bifunctional Materials: Effect of the Ni : Fe Ratio on the Electrochemical Performance

The development of an efficient and cost-effective material is highly desirable for electrochemical devices such as electrolyzers and supercapacitors. Especially, pseudomorphic transformations of metal-organic frameworks (MOFs)/coordination polymers (CPs) into layered double hydroxides (LDHs) materials endow well-defined porosities, high surface area, exchangeable interlayer anions and easily adjustable electronic structure that are truly required for oxygen evolution reaction (OER) and high-performance supercapacitor applications. Herein, we have prepared NiFe-LDHs of various Ni/Fe ratios via a facile room-temperature alkaline hydrolysis of NiFe-CPs precursors. Electrochemical studies reveal that the catalyst having high amount of Fe (Ni1.2 Fe1 -LDH) showed the better OER activity with a low Tafel slope (65 mV dec-1 ) in 1 M KOH. On the other hand, the catalyst containing higher amount of Ni with better layered structure (Ni11.7 Fe1 -LDH) showed high performance for supercapacitor (702 F g-1 at 0.25 A g-1 ) in 3 M KOH. Moreover, a solid-state asymmetric supercapacitor device Ni11.7 Fe1 -LDH/AC was fabricated which exhibited a specific capacitance of 18 F g-1 at a current density of 1 A g-1 . The device displayed high cycling stability with 88% of capacitance retention after 7000 cycles. The experimental findings in this work will help in the futuristic development of NiFe-LDH based electrocatalysts for the enhanced electrochemical performances.

Coupling Transition Metal Compound with Single-Atom Site for Water Splitting Electrocatalysis

Single-atom site catalysts (SACs) provide an ideal platform to identify the active centers, explore the catalytic mechanism, and establish the structure-property relationships, and thus have attracted increasing interests for electrocatalytic energy conversion. Substantial endeavors have been devoted to the construction of carbon-supported SACs, and their progress have been comprehensively reviewed. Compared with carbon-supported SACs, transition metal compounds (TMCs)-supported SACs are still in their infancy in the field of electrocatalysis. However, they have also aroused ever-increasing attention for driving electrocatalytic water splitting, and emerged as an indispensable class of SACs in recent years, predominately owing to their inherently structural features, such as rich anchoring sites, surface defects, and lattice vacancy. Herein, in this review, we have systematically summarized the recent advances of a variety of TMC supported SACs toward electrocatalytic water splitting. The advanced characterization techniques and theoretical analyses for identifying and monitoring the atomic structure of SACs are firstly manifested. Subsequently, the anchoring and stabilization mechanisms for TMC supported SACs are also highlighted. Thereafter, the advances of TMC supported SACs for driving water electrolysis are systematically unraveled.

Lithium Vacancy-Tuned [CuO4 ] Sites for Selective CO2 Electroreduction to C2+ Products

Electrochemical CO₂ reduction to valuable multi-carbon (C₂₊ ) products is attractive but with poor selectivity and activity due to the low-efficient CC coupling. Herein, a lithium vacancy-tuned Li₂ CuO₂ with square-planar [CuO₄ ] layers is developed via an electrochemical delithiation strategy. Density functional theory calculations reveal that the lithium vacancies (V_Li ) lead to a shorter distance between adjacent [CuO₄ ] layers and reduce the coordination number of Li⁺ around each Cu, featuring with a lower energy barrier for COCO coupling than pristine Li₂ CuO₂ without V_Li . With the V_Li percentage of ≈1.6%, the Li_{2- x} CuO₂ catalyst exhibits a high Faradaic efficiency of 90.6 ± 7.6% for C₂₊ at -0.85 V versus reversible hydrogen electrode without iR correction, and an outstanding partial current density of -706 ± 32 mA cm^-2 . This work suggests an attractive approach to create controllable alkali metal vacancy-tuned Cu catalytic sites toward C₂₊ products in electrochemical CO₂ reduction.

Heterointerface Engineering of Hierarchically Assembling Layered Double Hydroxides on Cobalt Selenide as Efficient Trifunctional Electrocatalysts for Water Splitting and Zinc-Air Battery

Engineering of structure and composition is essential but still challenging for electrocatalytic activity modulation. Herein, hybrid nanostructured arrays (HNA) with branched and aligned structures constructed by cobalt selenide (CoSe₂ ) nanotube arrays vertically oriented on carbon cloth with CoNi layered double hydroxide (CoSe₂ @CoNi LDH HNA) are synthesized by a hydrothermal-selenization-hybridization strategy. The branched and hollow structure, as well as the heterointerface between CoSe₂ and CoNi LDH guarantee structural stability and sufficient exposure of the surface active sites. More importantly, the strong interaction at the interface can effectively modulate the electronic structure of hybrids through the charge transfer and then improves the reaction kinetics. The resulting branched CoSe₂ @CoNi LDH HNA as trifunctional catalyst exhibits enhanced electrocatalytic performance toward oxygen evolution/reduction and hydrogen evolution reaction. Consequently, the branched CoSe₂ @CoNi LDH HNA exhibits low overpotential of 1.58 V at 10 mA cm^-2 for water splitting and superior cycling stability (70 h) for rechargeable flexible Zn-air battery. Theoretical calculations reveal that the construction of heterostructure can effectively lower the reaction barrier as well as improve electrical conductivity, consequently favoring the enhanced electrochemical performance. This work concerning engineering heterostructure and topography-performance relationship can provide new guidance for the development of multifunctional electrocatalysts.

Facile Synthesis of Amorphous MoCo Lamellar Hydroxide for Alkaline Water Oxidation

To find an oxygen evolution reaction (OER) catalyst with satisfactory catalytic performance and affordable cost is of great importance to the development of many new energy devices. In this work, a simple and effective strategy was developed to synthesize a series of amorphous MoCo lamellar hydroxide through one-step chemical co-precipitation. Systematic investigations showed that different functional agents (2-methylimidazole, NaOH, NH₄ OH) in the fabrication process resulted in different micromorphology of the catalyst, thus influencing its electrocatalytic performance. Also, adding various amounts of Mo could influence the intrinsic catalytic properties. Samples synthesized with appropriate functional agent addition and optimized Mo addition exhibited amorphous nature and bent nanosheet morphology, as well as highest intrinsic catalytic activity, showing a low overpotential of 290 mV at 10 mA cm^-2 and a small Tafel slope of 55 mV dec^-1 in 1 m KOH solution. Additionally, the catalytic performance of the sample showed just small decay after 50 h chronopotentiometry test and 3000 cyclic voltammetry cycles, exhibiting the ultra-stable catalytic activity of the catalyst. This work provides a possible large-scale commercial production strategy of OER catalysts with promising performance and low fabrication cost.

Layered Double Hydroxide-Assisted Fabrication of Prussian Blue Membranes for Precise Molecular Sieving

Prussian Blue (PB), which was first discovered as robust blue-colored pigment in the year 1706, has shown promising prospects in disease treatment, energy conversion, water splitting, and sensing. Relying on the uniform 3.2 Å-sized pore channels as well as high stability in aqueous environments, in this study, we pioneered in situ preparation of polycrystalline PB membranes to justify their dye rejection and metal ion discrimination ability in aqueous environments. Among various factors, the introduction of calcined NiFe layered double hydroxide buffer layers on porous α-Al₂ O₃ substrates was found to play a paramount role in the formation of continuous polycrystalline PB membranes, thereby leading to excellent dye rejection efficiency (>99.0 %). Moreover, prepared PB membranes enabled discriminating different monovalent metal ions (e.g., Li⁺ , Na⁺ , and K⁺ ) depending on their discrepancy in Stokes diameters, showing great promise for lithium extraction from smaller-sized metal ions.

Evolution of Cationic Vacancy Defects: A Motif for Surface Restructuration of OER Precatalyst

Defects have been found to enhance the electrocatalytic performance of NiFe-LDH for oxygen evolution reaction (OER). Nevertheless, their specific configuration and the role played in regulating the surface reconstruction of electrocatalysts remain ambiguous. Herein, cationic vacancy defects are generated via aprotic-solvent-solvation-induced leaking of metal cations from NiFe-LDH nanosheets. DFT calculation and in situ Raman spectroscopic observation both reveal that the as-generated cationic vacancy defects tend to exist as V_M (M=Ni/Fe); under increasing applied voltage, they tend to assume the configuration V_MOH , and eventually transform into V_MOH-H which is the most active yet most difficult to form thermodynamically. Meanwhile, with increasing voltage the surface crystalline Ni(OH)_x in the NiFe-LDH is gradually converted into disordered status; under sufficiently high voltage when oxygen bubbles start to evolve, local NiOOH species become appearing, which is the residual product from the formation of vacancy V_MOH-H . Thus, we demonstrate that the cationic defects evolve along with increasing applied voltage (V_M → V_MOH → V_MOH-H ), and reveal the essential motif for the surface restructuration process of NiFe-LDH (crystalline Ni(OH)_x → disordered Ni(OH)_x → NiOOH). Our work provides insight into defect-induced surface restructuration behaviors of NiFe-LDH as a typical precatalyst for efficient OER electrocatalysis.

Coupling Electrocatalytic Nitric Oxide Oxidation over Carbon Cloth with Hydrogen Evolution Reaction for Nitrate Synthesis

NO is a harmful pollutant to the environment. The traditional removal of NO is hindered by the harsh operating conditions and sacrifice of value-added chemicals. Efficient electrocatalytic oxidation of NO was achieved over plasma-treated commercial carbon cloth, serving as a promising anode substitution reaction to couple with the hydrogen evolution reaction without consumption of hydrogen-containing resources. The introduction of carboxyl groups onto the carbon cloth boosted the electrocatalytic activity via the enhancement of NO chemisorption. Only potentials of 1.39 V and 1.07 V were applied to reach the current density of 10 mA cm^-2 in neutral and acidic conditions, respectively, which is superior to the state-of-the-art electrocatalysts for oxygen evolution. Energy and environmental concerns on fossil-fuel-derived hydrogen production, ammonia manufacture and nitrate synthesis, are greatly alleviated. This work provides an original strategy to realize the resource utilization of NO, the sustainable nitrate synthesis and hydrogen production in a green and economical way.

Controllable Modulation of Defects for Layered Double Hydroxide Nanosheets by Altering Intercalation Anions for Efficient Electrooxidation Catalysis

Hydrazine (N₂ H₄ ) is considered as one of the most potential energy storage materials in liquid fuel cells, as it contains high energy and power density, and the high-efficiency oxidation of N₂ H₄ in fuel cells has drawn great attention. However, the most used catalysts are expensive noble metal catalysts, thus the development of highly efficient non-noble metal catalysts is crucial to reduce the cost of hydrazine oxidation in practical industry. Herein, we synthesized a series of CoFe-layered double hydroxides (CoFe-LDHs) intercalated with different anions via a simple one-step co-precipitation method for the electrooxidation of hydrazine. Through altering the intercalated anions of CoFe-LDHs, the defects and the electronic structure can be well controlled, and the catalytic performance for the electrooxidation of hydrazine were well promoted by using NO₃ ^- intercalated into CoFe-LDH compared with other anions (like Cl^- , BO₃ ^3- , CO₃ ^2- ). This work developed a series of hydrazine electrooxidation catalysts and established the relationship between the intercalated anions, the fine structure of the catalyst and the electrocatalytic performance.

Advancing the extended roles of 3D transition metal based heterostructures with copious active sites for electrocatalytic water splitting

The replacement of noble metals with alternative electrocatalysts is highly demanded for water splitting. From the exploration of 3D -transition metal based heterostructures, engineering at the nano-level brought more enhancements in active sites with reduced overpotentials for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). However, recent developments in 3D transition metal based heterostructures like direct growth on external substrates (Ni foam, Cu foam) gave highly impressive activities and stabilities. Research needs to be focused on how the active sites can be enhanced further with 3D heterostructures of transition metals by studying them with various counterparts like hydroxides, layered double hydroxides and phosphides for empowering both OER and HER applications. This perspective covers the way to enlarge the utilization of 3D heterostructures successfully in terms of reduced overpotentials, highly exposed active sites, increased electrical conductivity, porosity and high-rate activity. From the various approaches of growth of transition metal based 3D heterostructures, it is easy to fine tune the active sites to have a viable production of hydrogen with less applied energy input. Overall, this perspective outlines a direction to increase the number of active sites on 3D transition metal based heterostructures by growing on 3D foams for enhanced water splitting applications.

Synthesis and Electronic Modulation of Nanostructured Layered Double Hydroxides for Efficient Electrochemical Oxygen Evolution

Water electrolysis is considered to be one of the most promising technologies to produce clean fuels. However, its extensive realization critically depends on the progress in cost-effective and high-powered oxygen evolution reaction (OER) electrocatalysts. As a member of the big family of two-dimensional (2D) materials, nanostructured layered double hydroxides (nLDHs) have made significant processes and continuous breakthroughs for OER electrocatalysis. In this Review, the advancements in designing nLDHs for OER in recent years were discussed with a unique focus on their electronic modulations and in situ analysis on catalytic processes. After a brief discussion on different synthetic methodologies of nLDHs, including "bottom-up" and "top-down" approaches, the general strategies to enhance the catalytic performances of nLDHs reported so far were summarized, including compositional substitution, heteroatom doping, vacancy engineering, and amorphous/crystalline engineering. Furthermore, the in situ OER processes and mechanism analysis on engineering efficient nLDHs electrocatalysts were discussed. Finally, the research trends, perspectives, and challenges on designing nLDHs were also carefully outlined. This progress Review may offer enlightening experimental/theoretical guidance for designing highly catalytic active nLDHs and provide new directions to promote their future prosperity for practical utilization in water splitting.

Heterogeneous Fenton Degradation of Organic Pollutants in Water Enhanced by Combining Iron-type Layered Double Hydroxide and Sulfate

Water pollution derived from organic pollutants is one of the global environmental problems. The Fenton reaction using Fe²⁺ as a homogeneous catalyst has been known as one of clean methods for oxidative degradation of organic pollutants. Here, a layered double hydroxide (Fe²⁺ Al³⁺ -LDH) containing Fe²⁺ and Al³⁺ in the structure was used to develop a "heterogeneous" Fenton catalyst capable of mineralizing organic pollutants. We found that sulfate ion (SO₄ ^2- ) immobilized on the Fe²⁺ Al³⁺ -LDH significantly facilitated oxidative degradation (mineralization) of phenol as a model compound of water pollutants to carbon dioxide (CO₂ ) in a heterogeneous Fenton process. The phenol conversion and mineralization efficiency to CO₂ reached >99% and ca. 50%, respectively, even with a reaction time of only 60 min.

Polymer/Iron-Based Layered Double Hydroxides as Multifunctional Wound Dressings

This work presents the development of multifunctional therapeutic membranes based on a high-performance block copolymer scaffold formed by polyether (PE) and polyamide (PA) units (known as PEBA) and layered double hydroxide (LDH) biomaterials, with the aim to study their uses as wound dressings. Two LDH layer compositions were employed containing Mg2+ or Zn2+, Fe3+ and Al3+ cations, intercalated with chloride anions, abbreviated as Mg-Cl or Zn-Cl, or intercalated with naproxenate (NAP) anions, abbreviated as Mg-NAP or Zn-NAP. Membranes were structurally and physically characterized, and the in vitro drug release kinetics and cytotoxicity assessed. PEBA-loading NaNAP salt particles were also prepared for comparison. Intercalated NAP anions improved LDH-polymer interaction, resulting in membranes with greater mechanical performance compared to the polymer only or to the membranes containing the Cl-LDHs. Drug release (in saline solution) was sustained for at least 8 h for all samples and release kinetics could be modulated: a slower, an intermediate and a faster NAP release were observed from membranes containing Zn-NAP, NaNAP and Mg-NAP particles, respectively. In general, cell viability was higher in the presence of Mg-LDH and the membranes presented improved performance in comparison with the powdered samples. PEBA containing Mg-NAP sample stood out among all membranes in all the evaluated aspects, thus being considered a great candidate for application as multifunctional therapeutic dressings.

Multiple Vacancies on (111) Facets of Single-Crystal NiFe2 O4 Spinel Boost Electrocatalytic Oxygen Evolution Reaction

Oxygen evolution reaction (OER) as the rate-determining reaction of water splitting has been attracting enormous attention. At present, only some noble-metal oxide materials (IrO₂ and RuO₂ ) have been reported as efficient OER electrocatalysts for OER. However, the high cost and scarcity of these noble-metal oxide materials greatly hamper their large-scale practical application. Herein, we synthesize 100% (111) faceted NiFe₂ O₄ single crystals with multiple vacancies (cation vacancies and O vacancies). The (111) facets can supply enough platform to break chemical bonds and enhance electrocatalytic activity, due to its high density of atomic steps and kink atoms. Compared to NiFe₂ O₄ (without vacancies), the as-synthesized NiFe₂ O₄ -Ar (with vacancies) exhibits a dramatically improved OER activity. The NiFe₂ O₄ -Ar-30 shows the lowest onset potential (1.45 V vs RHE) and the best electrocatalytic OER activity with the lowest overpotential of 234 mV at 50 mA cm^-2 . Furthermore, based on the theoretical calculations that the introduction of multiple vacancies can effectively modulate the electronic structure of active centers to accelerate charge transfer and reaction intermediates adsorption, which can reduce the reaction energy barrier and enhance the activity of electrochemical OER.

Shuangyin Wang

"The secret of being a successful scientist is to do your own and labeled research … In my first experiment I unintentionally functionalized carbon nanotubes, on which Pt nanoparticles were deposited uniformly. Luck is part of research …" Find out more about Shuangyin Wang in his Author Profile.

Amorphous Ni-Fe-Mo Suboxides Coupled with Ni Network as Porous Nanoplate Array on Nickel Foam: A Highly Efficient and Durable Bifunctional Electrode for Overall Water Splitting

It is a great challenge to fabricate electrode with simultaneous high activity for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Herein, a high-performance bifunctional electrode formed by vertically depositing a porous nanoplate array on the surface of nickel foam is provided, where the nanoplate is made up by the interconnection of trinary Ni-Fe-Mo suboxides and Ni nanoparticles. The amorphous Ni-Fe-Mo suboxide and its in situ transformed amorphous Ni-Fe-Mo (oxy)hydroxide acts as the main active species for HER and OER, respectively. The conductive network built by Ni nanoparticles provides rapid electron transfer to active sites. Moreover, the hydrophilic and aerophobic electrode surface together with the hierarchical pore structure facilitate mass transfer. The corresponding water electrolyzer demonstrates low cell voltage (1.50 V @ 10 mA cm-2 and 1.63 V @ 100 mA cm-2) with high durability at 500 mA cm-2 for at least 100 h in 1 m KOH.

Advanced Bifunctional Oxygen Reduction and Evolution Electrocatalyst Derived from Surface-Mounted Metal-Organic Frameworks

Metal-organic frameworks (MOFs) and their derivatives are considered as promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which are important for many energy provision technologies, such as electrolyzers, fuel cells and some types of advanced batteries. In this work, a "strain modulation" approach has been applied through the use of surface-mounted NiFe-MOFs in order to design an advanced bifunctional ORR/OER electrocatalyst. The material exhibits an excellent OER activity in alkaline media, reaching an industrially relevant current density of 200 mA cm-2 at an overpotential of only ≈210 mV. It demonstrates operational long-term stability even at a high current density of 500 mA cm-2 and exhibits the so far narrowest "overpotential window" ΔEORR-OER of 0.69 V in 0.1 m KOH with a mass loading being two orders of magnitude lower than that of benchmark electrocatalysts.

Holey Assembly of Two-Dimensional Iron-Doped Nickel-Cobalt Layered Double Hydroxide Nanosheets for Energy Conversion Application

Layered double hydroxides (LDHs) containing first-row transition metals such as Fe, Co, and Ni have attracted significant interest for electrocatalysis owing to their abundance and excellent performance for the oxygen evolution reaction (OER) in alkaline media. Herein, the assembly of holey iron-doped nickel-cobalt layered double hydroxide (NiCo-LDH) nanosheets ('holey nanosheets') is demonstrated by employing uniform Ni-Co glycerate spheres as self-templates. Iron doping was found to increase the rate of hydrolysis of Ni-Co glycerate spheres and induce the formation of a holey interconnected sheet-like structure with small pores (1-10 nm) and a high specific surface area (279 m²  g^-1 ). The optimum Fe-doped NiCo-LDH OER catalyst showed a low overpotential of 285 mV at a current density of 10 mA cm^-2 and a low Tafel slope of 62 mV dec^-1 . The enhanced OER activity was attributed to (i) the high specific surface area of the holey nanosheets, which increases the number of active sites, and (ii) the improved kinetics and enhanced ion transport arising from the iron doping and synergistic effects.

Laser-Ablation-Produced Cobalt Nickel Phosphate with High-Valence Nickel Ions as an Active Catalyst for the Oxygen Evolution Reaction

Cost-effective, highly efficient and stable non-noble metal-based catalysts for the oxygen evolution reaction (OER) are very crucial for energy storage and conversion. Here, an amorphous cobalt nickel phosphate (CoNiPO₄ ), containing a considerable amount of high-valence Ni³⁺ species as an efficient electrocatalyst for OER in alkaline solution, is reported. The catalyst was converted from Co-doped Ni₂ P through pulsed laser ablation in liquid (PLAL) and exhibits a large specific surface area of 162.5 m²  g^-1 and a low overpotential of 238 mV at 10 mA cm^-2 with a Tafel slope of 46 mV dec^-1 , which is much lower than those of commercial RuO₂ and IrO₂ . This work demonstrates that PLAL is a powerful technology for generating amorphous CoNiPO₄ with high-valence Ni³⁺ , thus paving a new way towards highly effective OER catalysts.

Topochemical Synthesis of Two-Dimensional Transition-Metal Phosphides Using Phosphorene Templates

Transition-metal phosphides (TMPs) have emerged as a fascinating class of narrow-gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two-dimensional (2D) sheets. Here, we demonstrate a general bottom-up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co2 P, Ni12 P5 , and Cox Fe2-x P) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co2 P is a p-type semiconductor, with a hole mobility of 20.8 cm2  V-1  s-1 at 300 K in field-effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge-transport modulation and improved surface exposure. In particular, iron-doped Co2 P (i.e. Co1.5 Fe0.5 P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm-2 that outperforms the commercial Ir/C benchmark (304 mV).

Boosting Alkaline Hydrogen Evolution Electrocatalysis over Metallic Nickel Sites through Synergistic Coupling with Vanadium Sesquioxide

For renewable and sustainable energy, developing cut-price and high-efficiency electrocatalysts for the hydrogen evolution reaction (HER) by alkaline water electrolysis is of paramount importance. In this study, a compound electrocatalyst composed of nickel-vanadium sesquioxide nanoparticles supported on porous nickel foam (Ni-V₂ O₃ /NF) is found to exhibit electrocatalytic performance towards HER that is superior to that of the commercial Pt/C catalyst, with nearly zero onset overpotential, an extremely low overpotential of 25 mV to obtain a current density of -10 mA cm^-2 , a Tafel slope of 58 mV dec^-1 , and a good durability for 24 h in 1.0 m KOH. Theoretical calculations reveal that the presence of V₂ O₃ optimizes the electronic structure of active Ni components and continuously accelerates the dissociation of water molecules, which in turn improves the HER kinetics. The present work will advance the development of highly efficient nanocomposite electrocatalysts for alkaline water electrocatalysis.

Strongly Coupled Interface Structure in CoFe/Co3 O4 Nanohybrids as Efficient Oxygen Evolution Reaction Catalysts

The quest for developing electrochemical energy-storage and -conversion technologies continues to be a great impetus to develop cost-effective, highly active, and electrochemically stable electrocatalysts for overcoming the activation energy barriers of the oxygen evolution reaction (OER). Co₃ O₄ nanocrystals have great potential as OER catalysts, and research efforts on improving the catalytic activity of Co₃ O₄ are currently underway in many laboratories. Herein, CoFe layered double hydroxide (LDH) nanosheets were directly grown on the active Co₃ O₄ substrate to form nanohybrid electrocatalysts for OER. The CoFe LDH/Co₃ O₄ (6:4) nanohybrid exhibited superior catalytic performance with a low overpotential and a small Tafel slope in alkaline solution. The outstanding performance of the CoFe LDH/Co₃ O₄ (6:4) nanohybrid was primarily owing to the synergistic effects induced by the strongly coupled interface between CoFe LDH and Co₃ O₄ ; this feature enhanced the intrinsic OER catalytic activity of the nanohybrid and favored fast charge transfer. Compared with other Co₃ O₄ -based catalysts, the nanohybrid shows advantages and offers a feasible avenue for improving the activity of Co₃ O₄ -based catalysts.

Attuning the Electronic Properties of Two-Dimensional Co-Fe-O for Accelerating Water Electrolysis and Photolysis

Two-dimensional (2D) materials such as layered double hydroxides (LDH) are promising electrocatalysts, especially for water oxidation, owing to their unique physical and electronic properties besides having adequate surface area and availability of unsaturated active metal centers. Herein, we illustrate the high-temperature transformation of bimetallic LDH to semicrystalline 2D metal oxide nanoplates that can maneuver their electronic properties and thereby accelerate the water dissociation reactions. The nanoplates prepared at 300 °C require only 280 ± 13 and 177 ± 7 mV overpotentials for oxygen/hydrogen evolution reactions (OER and HER) to achieve a current density of ±10 mA cm^-2 in 1 M KOH, respectively. In a two-electrode water splitting cell, while this bifunctional catalyst needs 1.69 V to deliver a current density of 10 mA cm^-2, the LDH precursor demands a cell voltage of 1.93 V. However, both the catalysts demonstrate excellent durability for more than 200 h. When the bifunctional metal oxide electrolyzer is connected to perovskite solar cells for unassisted solar-driven water splitting, impressively, such an integrated photovoltaic-electrolyzer can achieve a solar-to-hydrogen (STH) efficiency of 9.3%. The predominantly superior catalytic activity of the nanoplates is due to the abundance of unsaturated oxygen which decreases the free energy of adsorption of the intermediates.

Defective NiFe2 O4 Nanoparticles for Efficient Urea Electro-oxidation

Urea is an important organic pollutants in sewage and needs to be removed for environmental protection. Here, we report defective NiFe₂ O₄ (NFO) nanoparticles with excellent performance for urea electro-oxidation. The results show that defects can be effectively implanted at the surface of NFO nanoparticles by a facile and versatile lithium reduction method without affecting its main crystal structure and grain size. The defective NFO-5Li nanoparticles displayed a significantly improved urea electro-oxidation performance compared with NFO-Pristine nanoparticles. Particularly, the NFO-Pristine and NFO-5Li show a potential of 1.398 and 1.361 V at the current density of 10 mA cm^-2 and Tafel slope of 37.3 and 31.4 mV dec^-1 , respectively. In addition, the NFO-5Li nanoparticles also revealed outstanding electrocatalytic stability. The superior performance can be attributed to the designed tunable surface defect engineering. Furthermore, the defect engineering strategy as well as the defective NFO nanoparticles hold great potential for applications in other materials and areas.

PBA@POM Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To realize the effective conversion of renewable energy through water decomposition, efficient electrocatalysts for the oxygen evolution reaction (OER) are essential. In this article, PBA@POM was successfully prepared with a Prussian blue analogue (PBA) as the initial structure. A facile hydrothermal process is reported for obtaining PBA@POM by etching the cubic PBA with a strong Brønsted acid, H₃ PMo₁₂ O₄₀ (HPMo). The hollow cube structure not only exposes more active sites but also promotes electron transport, which results in excellent electrocatalytic activity for the OER. Compared with the PBA, which initially simply adhered to POM, the optimum PBA@POM hybrids display remarkably enhanced OER catalytic activity, with an almost constant overpotential of 440 mV at a current density of 10 mA cm^-2 and a small Tafel slope (23.45 mV dec^-1 ). The facilely prepared PBA@POM with good electrochemical activity and stability promises great potential for the OER.

Edge/Defect Sites in α-Co1-m Fem (OH)x Nanoplates Responsible for Water Oxidation Activity

Fe-doped transition metal (oxy)hydroxides are regarded as the most efficient oxygen evolution reaction (OER) electrocatalysts in alkaline conditions. The incorporation of Fe effectively enhances the OER activity of Co-/Ni-based materials, but the corresponding role of Fe in Co-based (oxy)hydroxide materials still remains unresolved. Herein, α-Co_1-m Fe_m (OH)_x is synthesized and systematically engineered to study the effect of Fe content on the morphology, crystalline structure, electronic structure, and OER activity. As the Fe content is changed, the basic crystalline phase of α-Co_1-m Fe_m (OH)_x is consistent whereas the micromorphology changes. Much smaller and thinner nanoplates with more edge/defect sites are fabricated because of increased Fe incorporation. When the Fe content is more than 0.1, twin nanoparticles emerge at the edge/defect sites of the sister nanoplate. Additionally, the OER activity of α-Co_1-m Fe_m (OH)_x against Fe content can be plotted as a volcano curve. These data thus support a hypothesis that the edge/defect sites in α-Co_1-m Fe_m (OH)_x are responsible for the OER performance. The incorporation of Fe leads to not only the accelerated intrinsic reactivity of each active site, which is attributed to the strong electronic interaction between Co and Fe but also changes the number of edge/defect sites.

Rapid Fabrication of Ni/NiO@CoFe Layered Double Hydroxide Hierarchical Nanostructures by Femtosecond Laser Ablation and Electrodeposition for Efficient Overall Water Splitting

The development of simple and effective methods for the rapid preparation of electrocatalysts for overall water splitting from earth-abundant elements is an important and challenging task. A facile and ultrafast two-step method was developed to prepare a Ni/NiO@CoFe layered double hydroxide hierarchical nanostructure (NCF) within a few minutes by femtosecond laser ablation and electrodeposition. In 1 m KOH solution, the optimized NCF catalysts show a low overpotential of 230 mV for the oxygen evolution reaction (OER) at a current density of 10 mA cm^-2 with a low Tafel slope of 34.3 mV dec^-1 , indicating fast and efficient OER kinetics. Owing to the synergistic effect between NiO and CoFe layered double hydroxide, the hydrogen evolution reaction performance of the NCF was also improved. The synthesized electrocatalysts were further utilized in overall water splitting with a potential of only 1.56 V at a current density of 10 mA cm^-2 and excellent durability, better than that of the commercial RuO₂ (+)//Pt/C(-) system. The present work provides new insights on the rapid and facile preparation of efficient electrocatalysts for overall water splitting on a large scale.