Catalytic regeneration of metal-hydrides from their corresponding metal-alkoxides via the hydroboration of carbonates to obtain methanol and diols

Thorium complexes decorated with 5-, 6-, and 7-membered N-heterocyclic iminato ligands containing mesityl wingtip substitutions have been synthesized and fully characterized. These complexes were found to be efficient in the hydroboration of cyclic and linear organic carbonates with HBpin or 9-BBN promoting their decarbonylation and producing the corresponding boronated diols and methanol. In addition, the hydroboration of CO2 breaks the molecule into "CO" and "O" forming boronated methanol and pinBOBpin. Moreover, the demanding depolymerization of polycarbonates to the corresponding boronated diols and methanol opens the possibility of recycling polymers for energy sources. Increasing the core ring size of the ligands allows a better performance of the complexes. The reaction proceeds with high yields under mild reaction conditions, with low catalyst loading, and short reaction times, and shows a broad applicability scope. The reaction is achieved via the recycling of a high-energy Th-H moiety from a stable Th-OR motif. Experimental evidence and DFT calculations corroborate the formation of the thorium hydride species and the reduction of the carbonate with HBpin to the corresponding Bpin-protected alcohols and H3COBpin through the formate and acetal intermediates.

Manganese-Catalyzed Hydrogenative Desulfurization of Thioamides

Earth-abundant transition metal catalysis has emerged as an important alternative to noble transition metal catalysis in hydrogenation reactions. However, there has been no Earth-abundant transition metal catalyzed hydrogenation of thioamides reported so far, presumably due to the poisoning of catalysts by sulfur-containing molecules. Herein, we described the first manganese-catalyzed hydrogenative desulfurization of thioamides to amines or imines. The key to success is the use of MnBr(CO)₅ instead of commonly-employed pincer-manganese catalysts, together with simple NEt₃ and CuBr. This protocol features excellent selectivity on sole cleavage of the C=S bond of thioamides, in contrast to the only known Ru-catalyzed hydrogenation of thioamides, and unprecedented chemo-selectivity tolerating vulnerable functional groups such as nitrile, ketone, aldehyde, ester, sulfone, nitro, olefin, alkyne and heterocycle, which are usually susceptible to common hydride-type reductive protocols.

Efficient Hydrogenation of N-Heterocycles Catalyzed by NNP-Manganese(I) Pincer Complexes at Ambient Temperature

Manganese-catalyzed hydrogenation reactions have aroused widespread interest in recent years. Among the catalytic systems described, especially PNP- and NNP-Mn pincer catalysts have been reported for the hydrogenation of aldehydes, ketones, nitriles, aldimines and esters. Furthermore, NNP-Mn pincer compounds are efficient catalysts for the hydrogenolysis of less reactive amides, ureas, carbonates, and carbamates. Herein, the synthesis and application of specific imidazolylaminophosphine ligands and the corresponding Mn pincer complexes are described. These new catalysts have been characterized and studied by a combination of experimental and theoretical investigations, and their catalytic activities have been tested in several hydrogenation reactions with good to excellent performance. Especially, the reduction of N-heterocycles can be performed under very mild conditions.

Homogeneous Hydrogenation of CO2 and CO to Methanol: The Renaissance of Low-Temperature Catalysis in the Context of the Methanol Economy

The traditional economy based on carbon-intensive fuels and materials has led to an exponential rise in anthropogenic CO₂ emissions. Outpacing the natural carbon cycle, atmospheric CO₂ levels increased by 50 % since the pre-industrial age and can be directly linked to global warming. Being at the core of the proposed methanol economy pioneered by the late George A. Olah, the chemical recycling of CO₂ to produce methanol, a green fuel and feedstock, is a prime channel to achieve carbon neutrality. In this direction, homogeneous catalytic systems have lately been a major focus for methanol synthesis from CO₂ , CO and their derivatives as potential low-temperature alternatives to the commercial processes. This Review provides an account of this rapidly growing field over the past decade, since its resurgence in 2011. Based on the critical assessment of the progress thus far, the present key challenges in this field have been highlighted and potential directions have been suggested for practically viable applications.

Manganese-Catalyzed Asymmetric Formal Hydroamination of Allylic Alcohols: A Remarkable Macrocyclic Ligand Effect

A unique family of chiral peraza N₆ -macrocyclic ligands, which are conformationally rigid and have a tunable saddle-shaped cavity, is described. Utilizing their manganese(I) complexes, the first example of earth-abundant transition metal-catalyzed asymmetric formal anti-Markovnikov hydroamination of allylic alcohols was realized, providing a practical access to synthetically important chiral γ-amino alcohols in excellent yields and enantioselectivities (up to 99 % yield and 98 % ee). The single-crystal structure of a Mn^I complex indicates that the manganese atom coordinates with the chiral dialkylamine moiety in a bidentate fashion. Further DFT calculations revealed that five of the six nitrogen atoms in the ligand were engaged in multiple noncovalent interactions with Mn, an isopropanol molecule, and a β-amino ketone intermediate via coordination, hydrogen bonding, and/or CH⋅⋅⋅π interactions in the transition state, showing a remarkable role of the macrocyclic framework.

Manganese-Catalyzed Asymmetric Hydrogenation of 3H-Indoles

The asymmetric hydrogenation (AH) of 3H-indoles represents an ideal approach to the synthesis of useful chiral indoline scaffolds. However, very few catalytic systems based on precious metals have been developed to realize this challenging reaction. Herein, we report a Mn-catalyzed AH of 3H-indoles with excellent yields and enantioselectivities. The kinetic resolution of racemic 3H-indoles by AH was also achieved with high s-factors to construct quaternary stereocenters. Many acid-sensitive functional groups, which cannot be tolerated when using a state-of-the-art ruthenium catalyst, were compatible with manganese catalysis. This new process expands the scope of this transformation and highlights the uniqueness of earth-abundant metal catalysis. The reaction could proceed with catalyst loadings at the parts per million (ppm) level with an exceptional turnover number of 72 350. This is the highest value yet reported for an earth-abundant metal-catalyzed AH reaction.

Evaluation of Manganese Catalysts for the Hydrogenative Deconstruction of Commercial and End-of-Life Polyurethane Samples

Polyurethane (PU) is a thermoset plastic that is found in everyday objects, such as mattresses and shoes, but also in more sophisticated materials, including windmills and airplanes, and as insulation materials in refrigerators and buildings. Because of extensive inter-cross linkages in PU, current recycling methods are somewhat lacking. In this work, the effective catalytic hydrogenation of PU materials is carried out by applying a catalyst based on the earth-abundant metal manganese, to give amine and polyol fractions, which represent the original monomeric composition. In particular, Mn-^Ph MACHO is found to catalytically deconstruct flexible foam, molded foams, insulation, and end-of-life materials at 1 wt.% catalyst loading by applying a reaction temperature of 180 °C, 50 bar of H₂ , and 0.9 wt.% of KOH in isopropyl alcohol. The protocol is showcased in the catalytic deconstruction of 2 g of mattress foam using only 0.13 wt.% catalyst, resulting in 90 % weight recovery and a turnover number of 905.

Hydrogenative Depolymerization of Polyurethanes Catalyzed by a Manganese Pincer Complex

Chemical recycling, in particular hydrogenative depolymerization, offers a promising way to utilize plastic waste. This report covers the manganese-catalyzed hydrogenation of polyurethane materials to the corresponding monomeric units. The key to success is a Mn pincer complex as a potent hydrogenation catalyst in combination with elevated temperatures (up to 200 °C) and appropriate solvents to ensure sufficient solubility of the polymers. A wide range of polyurethane samples of varying polyol and isocyanate compositions, some of which feature significant amounts of urea functionalities, are depolymerized, releasing polyetherols and diaminotoluene (TDA) in yields of up to 89 % and 76 %, respectively.

Utilizing Design of Experiments Approach to Assess Kinetic Parameters for a Mn Homogeneous Hydrogenation Catalyst

Homogeneous hydrogenation catalysts based on metal complexes provide a diverse and highly tunable tool for the fine chemical industry. To fully unleash their potential, fast and effective methods for the evaluation of catalytic properties are needed. In turn, this requires changes in the experimental approaches to test and evaluate the performance of the catalytic processes. Design of experiment combined with statistical analysis can enable time‐ and resource‐efficient experimentation. In this work, we employ a set of different statistical models to obtain the detailed kinetic description of a highly active homogeneous Mn (I) ketone hydrogenation catalyst as a representative model system. The reaction kinetics were analyzed using a full second order polynomial regression model, two models with eliminated parameters and finally a model which implements “chemical logic”. The coefficients obtained are compared with the corresponding high‐quality kinetic parameters acquired using conventional kinetic experiments. We demonstrate that various kinetic effects can be well captured using different statistical models, providing important insights into the reaction kinetics and mechanism of a complex catalytic reaction.

Ascendancy of Nitrogen Heterocycles in the Computationally Designed Mn(I)PNN Pincer Catalysts on the Hydrogenation of Carbon Dioxide to Methanol

The development of sustainable catalysts to get methanol from CO₂ under milder conditions and without any additives is still considered an arduous task. In many instances, transition-metal-catalyzed carbon dioxide to formic acid formation is more facile than methanol formation. This article provides comprehensive density functional theoretic investigations of six new Mn(I)PNN complexes, which are designed to perform CO₂ to methanol conversion under milder reaction conditions. All these six catalysts have similar structural features except at terminal nitrogen, -N (1), where adenine-inspired nitrogen heterocycles containing pyridine and pyrimidine moieties are attached to instill an electron withdrawing effect on the central metal and thus to facilitate dihydrogen polarization during the catalyst regeneration. All these computationally modeled Mn(I)PNN complexes demonstrate the promising catalytic activity to get methanol through cascade catalytic cycles at 298.15 K. The metal-ligand cooperative (MLC) as well as noncooperative (NC) pathways are investigated for each catalytic cycle. The NC pathway is the preferred pathway for formic acid and formaldehyde formation, whereas methanol formation proceeds through only the MLC pathway. Different nitrogen heterocycles attached to the -N (1) terminal manifested a considerable amount of impact on the Gibbs free energies, overall activation energies, and computed turnover frequencies (TOFs). Among all the catalysts, SPCAT02 provides excellent TOFs for HCO₂H (500 151 h^-1), HCHO (11 912 h^-1), and CH₃OH (2 372 400 h^-1) formation at 50 °C. SPCAT04 is found to be a better catalyst for the selective formation of formic acid formation at room temperature than the rest of the catalysts. The computed TOF results are found reliable upon comparison with experimentally established catalysts. To establish the structure-activity relationship, the activation strain model and Fukui function calculations are performed on all the catalysts. Both these studies provide complementary results. The present study revealed a very important finding that a more electrophilic metal center could facilitate the CO₂ hydrogenation reaction robustly. All computationally designed catalysts could be cheaper and better alternatives to convert CO₂ to methanol under mild reaction conditions in an aqueous medium.

Depolymerization of Technical-Grade Polyamide 66 and Polyurethane Materials through Hydrogenation

Chemical recycling provides a promising solution to utilize plastic waste. Here, a catalytic hydrogenative depolymerization of polyamide 66 (PA 66) and polyurethane (PU) was developed. The system employed Ru pincer complexes at high temperature (200 °C) in THF solution, and even technical-grade polymers could be hydrogenated with satisfactory yields under these conditions. A comparison of the system with some known heterogeneous catalysts as well as catalyst poisoning tests supported the homogeneity of the system. These results demonstrate the potential of chemical recycling to regain building blocks for polymers and will be interesting for the further development of polymer hydrogenation.

Ligand-assisted Hydride Transfer: A Pivotal Step for CO2 Hydroboration Catalyzed by a Mononuclear Mn(I) PNP Complex

A mononuclear Mn(I) pincer complex [Mn(Ph₂ PCH₂ SiMe₂ )₂ NH(CO)₂ Br] was disclosed to catalyze the pinacolborane (HBpin)-based CO₂ hydroboration reaction. Density functional calculations were conducted to reveal the reaction mechanism. The calculations showed that the reaction mechanism could be divided into four stages: (1) the addition of HBpin to the unsaturated catalyst C1; (2) the reduction of CO₂ to HCOOBpin; (3) the reduction of HCOOBpin to HCHO; (4) the reduction of HCHO to CH₃ OBpin. The activation of HBpin is the ligand-assisted addition of HBpin to the unsaturated Mn(I)-N complex C1 generated by the elimination of HBr from the Mn(I) pincer catalyst. The sequential substrate reductions share a common mechanism, and every hydroboration commences with the nucleophilic attack of the Mn(I)-H to the electron-deficient carbon centers. The hydride transfer from Mn(I) to HCOOBpin was found to be the rate-limiting step for the whole catalytic reaction, with a total barrier of 27.0 kcal/mol, which fits well with the experimental observations at 90 °C. The reactivity trend of CO₂ , HCOOBpin, HCHO, and CH₃ OBpin was analyzed through both thermodynamic and kinetic analysis, in the following order, namely HCHO>CO₂ >HCOOBpin≫CH₃ OBpin. Importantly, the very high barrier for the reduction of CH₃ OBpin to form CH₄ reconciles with the fact that methane was not observed in this catalytic reaction.

Manganese-Catalyzed Hydroborations with Broad Scope

Reductive transformations of easily available oxidized matter are at the heart of synthetic manipulation and chemical valorization. The applications of catalytic hydrofunctionalization benefit from the use of liquid reducing agents and operationally facile setups. Metal‐catalyzed hydroborations provide a highly prolific platform for reductive valorizations of stable C=X electrophiles. Here, we report an especially facile, broad‐scope reduction of various functions including carbonyls, carboxylates, pyridines, carbodiimides, and carbonates under very mild conditions with the inexpensive pre‐catalyst Mn(hmds)₂. The reaction could be successfully applied to depolymerizations.

Hydrogenative Depolymerization of End-of-Life Polycarbonates by an Iron Pincer Complex

Chemical recycling processes can contribute to a resource-efficient plastic economy. Herein, a procedure for the iron-catalyzed hydrogenation of the carbonate function of end-of-life polycarbonates under simultaneous depolymerization is presented. The use of a straightforward iron pincer complex leads to high rate of depolymerization of poly(bisphenol A carbonate) and poly(propylene carbonate) yielding the monomers bisphenol A and 1,2-propanediol, respectively, as products under mild reaction conditions. Furthermore, the iron complex was able to depolymerize polycarbonates containing goods and mixture of plastics containing polycarbonates.

Formal C-H Carboxylation of Unactivated Arenes

A formal C-H carboxylation of unactivated arenes using CO2 in green solvents is described. The present strategy combines a sterically controlled Ir-catalyzed C-H borylation followed by a Cu-catalyzed carboxylation of the in situ generated organoboronates. The reaction is highly regioselective for the C-H carboxylation of 1,3-disubstituted and 1,2,3-trisubstituted benzenes, 1,2- or 1,4-symmetrically substituted benzenes, fluorinated benzenes and different heterocycles. The developed methodology was applied to the late-stage C-H carboxylation of commercial drugs and ligands.

Manganese(I)-Catalyzed β-Methylation of Alcohols Using Methanol as C1 Source

Highly selective β-methylation of alcohols was achieved using an earth-abundant first row transition metal in the air stable molecular manganese complex [Mn(CO)2 Br[HN(C2 H4 Pi Pr2 )2 ]] 1 ([HN(C2 H4 Pi Pr2 )2 ]=MACHO-i Pr). The reaction requires only low loadings of 1 (0.5 mol %), methanolate as base and MeOH as methylation reagent as well as solvent. Various alcohols were β-methylated with very good selectivity (>99 %) and excellent yield (up to 94 %). Biomass derived aliphatic alcohols and diols were also selectively methylated on the β-position, opening a pathway to "biohybrid" molecules constructed entirely from non-fossil carbon. Mechanistic studies indicate that the reaction proceeds through a borrowing hydrogen pathway involving metal-ligand cooperation at the Mn-pincer complex. This transformation provides a convenient, economical, and environmentally benign pathway for the selective C-C bond formation with potential applications for the preparation of advanced biofuels, fine chemicals, and biologically active molecules.

Indirect CO2 Methanation: Hydrogenolysis of Cyclic Carbonates Catalyzed by Ru-Modified Zeolite Produces Methane and Diols

We report a ruthenium-modified zeolite which efficiently transforms propylene carbonate to propylene glycol and methane, under solvent-free conditions. The catalyst achieved high product selectivity and no significant ageing effect was observed after multiple cycles. The resulting liquid product (water-containing glycol) can be directly used as anti-freeze solution and the gas phase can directly be used as an energy carrier in the form of H₂ -enriched methane. This process efficiently bridges energy storage and an important chemical synthesis under sustainable (CO₂ consuming) conditions.

Catalytic Hydrogenation of Cyclic Carbonates using Manganese Complexes

Catalytic hydrogenation of cyclic carbonates to diols and methanol was achieved using a molecular catalyst based on earth-abundant manganese. The complex [Mn(CO)2 (Br)[HN(C2 H4 Pi Pr2 )2 ] 1 comprising commercially available MACHO ligand is an effective pre-catalyst operating under relatively mild conditions (T=120 °C, p(H2 )=30-60 bar). Upon activation with NaOt Bu, the formation of coordinatively unsaturated complex [Mn(CO)2 [N(C2 H4 Pi Pr2 )2 )] 5 was spectroscopically verified, which confirmed a kinetically competent intermediate. With the pre-activated complex, turnover numbers up to 620 and 400 were achieved for the formation of the diol and methanol, respectively. Stoichiometric reactions under catalytically relevant conditions provide insight into the stepwise reduction form the CO2 level in carbonates to methanol as final product.

Hydrogenation of CO2 -Derived Carbonates and Polycarbonates to Methanol and Diols by Metal-Ligand Cooperative Manganese Catalysis

The first base-metal-catalysed hydrogenation of CO₂ -derived carbonates to alcohols is presented. The reaction proceeds under mild conditions in the presence of a well-defined manganese complex with a loading as low as 0.25 mol %. The non-precious-metal homogenous catalytic system provides an indirect route for the conversion of CO₂ into methanol with the co-production of value-added (vicinal) diols in yields of up to 99 %. Experimental and computational studies indicate a metal-ligand cooperative catalysis mechanism.