Elucidating the Binding Mode of Sulfur- and Selenium-Based Cationic Chalcogen-Bond Donors

For a comparison of the interaction modes of various chalcogen-bond donors, 2-chalcogeno-imidazolium salts have been designed, synthesized, and studied by single crystal X-ray diffraction, solution NMR and DFT as well as for their ability to act as activators in an SN1-type substitution reaction. Their interaction modes in solution were elucidated based on NMR diffusion and chemical shift perturbation experiments, which were supported by DFT-calculations. Our finding is that going from lighter to the heavier chalcogens, hydrogen bonding plays a less, while chalcogen bonding an increasingly important role for the coordination of anions. Anion-π interactions also show importance, especially for the sulfur and selenium derivatives.

Preparation of Carbon-Based Solid Acid Catalyst from High-Sulfur Petroleum Coke with Nitric Acid and Ball Milling, and a Computational Evaluation of Inherent Sulfur Conversion Pathways

A series of petroleum coke (petcoke)-derived solid acid catalysts were prepared via nitric acid treatment with or without ball milling pretreatment. The inherent sulfur in petcoke was converted to sulfonic groups, which were active sites for the esterification of octanoic acid and methanol at 60 °C, with ester yields of 14-43%. More specifically, samples without ball milling treated at 120 °C for 3 h had a total acidity of 4.67 mmol/g, which was 1.6 times that of the samples treated at 80 °C, despite their -SO3H acidities being similar (~0.08 mmol/g). The samples treated for 24 h had higher -SO3H (0.10 mmol/g) and total acidity (5.25 mmol/g) but not increased catalytic activity. Ball milling increased the defects and exposed aromatic hydrogen groups on petcoke, which facilitated further acid oxidation (0.12 mmol -SO3H/g for both materials and total acidity of 5.18 mmol/g and 5.01 mmol/g for BP-N-3/120 and BP-N-8/90, respectively) and an increased ester yield. DFT calculations were used to analyze the pathways of sulfonic acid group formation, and the reaction pathway with NO2• was the most thermodynamically and kinetically favourable. The activities of the prepared catalysts were related to the number of -SO3H acid sites, the total acidity, and the oxygen content, with the latter two factors having a negative impact.

Visible-Light-Switchable Tellurium-Based Chalcogen Bonding: Photocontrolled Anion Binding and Anion Abstraction Catalysis

Exploring new noncovalent bonding motifs with reversibly tunable binding affinity is of fundamental importance in manipulating the properties and functions of supramolecular self-assembly systems and materials. Herein, for the first time, we demonstrate a unique visible-light-switchable telluro-triazole/triazolium-based chalcogen bonding (ChB) system in which the Te moieties are connected by azobenzene cores. The binding strengths between these azo-derived ChB receptors and the halide anions (Cl^- , Br^- ) could be reversibly regulated upon irradiation by visible light of different wavelengths. The cis-bidentate ChB receptors exhibit enhanced halide anion binding ability compared to the trans-monodentate receptors. In particular, the telluro-triazolium-based ChB receptor can achieve both high and significantly photoswitchable binding affinities for halide anions, which enable it to serve as an efficient photocontrolled organocatalyst for ChB-assisted halide abstraction in a Friedel-Crafts alkylation benchmark reaction.

Stereochemistry Controls Dihydrogen Bonding Strengths in Chiral Amine Boranes Adducts

The growing interest in exploiting novel concepts of non-covalent interactions in catalysts and supramolecular chemistry made us revisit a special kind of hydrogen bonding: the dihydrogen bond (DHB), formed between a classical hydrogen bond donor and a hydridic hydrogen as acceptor. Herein, we investigate how the strength of the N-H^δ+ ⋅⋅⋅^δ- H-B interaction and hence the DHB-driven self-aggregation of amine-borane adducts is governed by steric effects by comparing the structures and binding enthalpies of various chiral derivatives. For a diastereomeric pair of amine-boranes prepared from a chiral secondary amine, we show that the stereochemistry at the nitrogen has significant influence on the interaction enthalpy. Based on this finding, N-chiral amine boranes can be envisioned to become interesting building blocks in supramolecular chemistry to fine-tune the formation dynamics of assemblies.

Heterocyclic Hemithioindigos: Highly Advantageous Properties as Molecular Photoswitches

A survey of heterocyclic hemithioindigo photoswitches is presented identifying a number of structural motives with outstanding property profiles. The highly sought-after combination of pronounced color change, quantitative switching in both directions, exceptional high quantum yields, and tunable high thermal stability of metastable states can be realized with 4-imidazole, 2-pyrrole, and 3-indole-based derivatives. In the former, an unusual preorganization using isomer selective chalcogen- and hydrogen bonding allows to precisely control geometry changes and tautomerism upon switching. Heterocyclic hemithioindigos thus represent highly promising photoswitches with advanced capabilities that will be of great value to anyone interested in establishing defined and reversible control at the molecular level.

Supramolecular Chalcogen‐Bonded Semiconducting Nanoribbons at Work in Lighting Devices

This work describes the design and synthesis of a π‐conjugated telluro[3,2‐β][1]‐tellurophene‐based synthon that, embodying pyridyl and haloaryl chalcogen‐bonding acceptors, self‐assembles into nanoribbons through chalcogen bonds. The ribbons π‐stack in a multi‐layered architecture both in single crystals and thin films. Theoretical studies of the electronic states of chalcogen‐bonded material showed the presence of a local charge density between Te and N atoms. OTFT‐based charge transport measurements showed hole‐transport properties for this material. Its integration as a p‐type semiconductor in multi‐layered Cu^I‐based light‐emitting electrochemical cells (LECs) led to a 10‐fold increase in stability (38 h vs. 3 h) compared to single‐layered devices. Finally, using the reference tellurotellurophene congener bearing a C−H group instead of the pyridyl N atom, a herringbone solid‐state assembly is formed without charge transport features, resulting in LECs with poor stabilities (<1 h).

Topochemical, Single‐Crystal‐to‐Single‐Crystal [2+2] Photocycloadditions Driven by Chalcogen‐Bonding Interactions

The face‐to‐face association of (E)‐1,2‐di(4‐pyridyl)ethylene (bpen) molecules into rectangular motifs stabilized for the first time by chalcogen bonding (ChB) interactions is shown to provide photoreactive systems leading to cyclobutane formation through single‐crystal‐to‐single‐crystal [2+2] photodimerizations. The chelating chalcogen bond donors are based on original aromatic, ortho‐substituted bis(selenocyanato)benzene derivatives 1–3, prepared from ortho‐diboronic acid bis(pinacol) ester precursors and SeO₂ and malononitrile in 75–90 % yield. The very short intramolecular Se⋅⋅⋅Se distance in 1–3 (3.22–3.24 Å), a consequence of a strong intramolecular ChB interaction, expands to 3.52–3.54 Å in the chalcogen‐bonded adducts with bpen, a distance (<4 Å) well adapted to the face‐to‐face association of the bpen molecules into the reactive position toward photochemical dimerization.

Catalytic Activation of Imines by Chalcogen Bond Donors in a Povarov [4+2] Cycloaddition Reaction

Recently, chalcogen bonding has been investigated in more detail in organocatalysis and the scope of activated functionalities continues to increase. Herein, the activation of imines in a Povarov [4+2] cycloaddition reaction with bidentate cationic chalcogen bond donors is presented. Tellurium‐based Lewis acids show superior properties compared to selenium‐based catalysts and inactive sulfur‐based analogues. The catalytic activity of the chalcogen bonding donors increases with weaker binding anions. Triflate, however, is not suitable due to its participation in the catalytic pathway. A solvent screening revealed a more efficient activation in less polar solvents and a pronounced effect of solvent (and catalyst) on endo : exo diastereomeric ratio. Finally, new chiral chalcogen bonding catalysts were applied but provided only racemic mixtures of the product.

Noncovalent Interactions Involving Group 6 in Biological Systems: The Case of Molybdopterin and Tungstopterin Cofactors

In this study we propose to coin the term Wolfium bond (WfB) to refer to a net attractive force (noncovalent interaction) between any element of group 6 and electron donor atoms (neutral molecules or anions) and to differentiate it from a coordination bond (metal‐ligand interaction). We provide evidence of the existence of this interaction by inspecting the X‐ray crystal structure of proteins containing Molybdopterin and Tungstopterin cofactors from the Protein Data Bank (PDB). The plausible biological role of the interaction as well as its physical nature (antibonding Wf‐Ligand orbital involved) are also analyzed by means of ab initio calculations (RI‐MP2/def2‐TZVP level of theory), Atoms in Molecules (AIM), Natural Bond Orbital (NBO) and Noncovalent Interactions plot (NCIplot) analyses.

Alkynyl Sulfonium Salts Can Be Employed as Chalcogen-Bonding Catalysts and Generate Alkynyl Radicals under Blue-Light Irradiation

Chalcogen bonding (ChB) has emerged as a promising tool in organic synthesis. However, compared with the well-developed selenium- and tellurium-based salt catalysts, the ChB catalysis of sulfonium salts is still unknown. Here, we report a new type of alkynyl-sulfonium salt ChB catalysis for various ionic transformations, including transfer hydrogenation, bromination, bromolactonization, dimerization of 1,1-diphenylethylene, nitro-Michael addition reaction and Ritter reaction. More importantly, the photocapability of ChB was first demonstrated to generate alkynyl radicals for the synthesis of a variety of chalcogenoacetylenes. Mechanistic studies shed light on the mechanism of the photoinduced reactions and confirmed the involvement of alkynyl radicals which are difficult to generate otherwise.

Solid-State Assembly by Chelating Chalcogen Bonding in Quinodimethane Tetraesters Fused with a Chalcogenadiazole

In contrast to p-quinodimethane tetraesters, which undergo facile polymerization due to their diradical character, newly synthesized 1 and 2 consisting of a chalcogenadiazole fused to a p-naphthoquinodimethane tetraester are thermodynamically stable due to butterfly-shaped deformation. Such a folded molecular structure is also favorable for chalcogen bond (ChB) formation through intermolecular close contacts between a chalcogen atom (E: Se or S) and the oxygen atoms of ester groups in a crystal. The less-explored chelating-ChB through a C=O⋅⋅⋅E⋅⋅⋅O=C contact [Se⋅⋅⋅O: 2.94-3.37 Å] is the key supramolecular synthon for the formation of a one-dimensional rod-like assembly in a crystal, which is commonly observed in selenadiazole-tetraesters (1) with OMe, OEt, and OiPr groups. The formation of inclusion cavities between the rods shows that 1 could serve as solid-state host molecules for clathrate formation, as found in a hexane-solvated crystal. In contrast, thiadiazole-tetraesters (2) are less suitable for the formation of a rod-like assembly since the ChB involving S is less effective, and thus is overwhelmed by weak hydrogen bonds through C-H⋅⋅⋅O contacts.

Topochemical Polymerization of a Diacetylene in a Chalcogen-Bonded (ChB) Assembly

The successful topochemical polymerization of bis(selenocyanatomethyl)butadyine 1 is achieved upon association in a 1 : 1 co-crystal with 1,2-bis(2-pyridyl)ethylene (2-bpen) through strong and linear (NC)-Se⋅⋅⋅N_Py chalcogen bonding (ChB) interactions, allowing for an appropriate parallel alignment of the diacetylene moieties toward the solid-state reaction. Co-crystal 1⋅(2-bpen) undergoes polymerization upon heating at 100 °C. The reaction progress was monitored by IR, DSC and PXRD. An enhancement of the polymer conductivity by 8 orders of magnitude is observed upon iodine doping. Strikingly, the course of polymerization is accompanied with sublimation of the ChB acceptor molecules 2-bpen, providing the polymer in a pure form with full recovery of the co-former, at variance with the usual hydrogen-bonded co-crystal strategies toward polydiacetylenes.

Cooperative Effect of Noncovalent Interactions on Tetrel Bonding in Halogenated Silanes

Tetrel bond, a weak noncovalent interaction between the  σ -hole of a Group IV element (Silicon in our case) and the cloud of an electronegative element (Oxygen in our case) is the focus of current work. The percentage strengthening of tetrel bond has been investigated by optimising 16 binary complexes of halogenated silane and water of general formula SiX n H 4 - n  - H 2 O and 16 ternary complexes, of general formula NaX - SiX n H 4 - n  -H 2 O, where X =F, Cl, Br and I and n = 1, 2, 3 and 4 at various levels of theory defined within the formalism of density functional theory (DFT). With the addition of NaX, tetrel bond between Si and O in SiX n H 4 - n  - H 2 O gets strengthened up to 49%, owing to cooperativity effect exerted by hydrogen bonding between X and H in the ternary complex NaX - SiX n H 4 - n  - H 2 O. In the series of complexes studied here, overall stabilization due to cooperativity lies between 10 kJ/mol to 170 kJ/mol. This large extent of reinforcement due to cooperativity has never been showcased before. The exceptional stabilization and reinforcement owe its genesis to the transformation of the ternary complex into a cluster orchestrated by the H-bonding in most of the cases and covalent bonding in few of the cases.

Catalysis with Supramolecular Carbon-Bonding Interactions

Herein, we describe a new catalysis platform, supramolecular carbon-bonding catalysis, which exploits the highly directional weak interactions between carbon centers of catalysts and electron donors to drive chemical reactions. To demonstrate this catalysis approach, we discovered a class of cyclopropane derivatives incorporated with carbonyl, ester and cyano groups as catalysts which showed general catalysis capability in different types of benchmark reactions. Among these typical examples, a challenging tail-to-head terpene cyclization can be achieved by supramolecular carbon-bonding catalysis. The co-crystal structures of catalyst and electron donors, comparison experiments, and titrations support a catalysis mode of carbon-bonding activation of Lewis basic reactants.

Halogen Bonding in Dithiane/Iodofluorobenzene Mixtures: A New Class of Hydrophobic Deep Eutectic Solvents

While research into deep eutectic solvents (DESs) has expanded over the previous two decades, the focus has remained on the utilization of hydrogen bond donors in these systems. Additionally, the majority of the known DESs rely on at least one ionic component. Through the combination of 1,3-dithiane and 1,2-diiodo-3,4,5,6-tetrafluorobenzene (1,2-F₄ DIB), we report the first known DES based on halogen bonding. This mixture remains a liquid, with a eutectic melting temperature of 13.7 °C over a range of 1,3-dithiane mole fraction (0.35 to 0.75). Additionally, cocrystals of 1,3- and 1,4-dithiane with 1,2-, 1,3-, and 1,4-F₄ DIB, as well as 1,3,5-trifluoro-2,4,6-triiodobenzene were studied via single-crystal X-ray diffraction. These data reveal a wide range of halogen bonding strengths (0.85<R_XB <0.99; R_XB =normalized halogen bond distance parameter) and geometries about the sulfur atom. By including intermolecular interactions beyond hydrogen bonding, the scope of possible DES systems can be greatly expanded.

Visible-Light-Induced Selective Photolysis of Phosphonium Iodide Salts for Monofluoromethylations

The sigma (σ)-hole effect has emerged as a promising tool to construct novel architectures endowed with new properties. A simple yet effective strategy for the generation of monofluoromethyl radicals is a continuing challenge within the synthetic community. Fluoromethylphosphonium salts are easily available, air- and thermally stable, as well as simple-to-handle. Herein, we report the ability of the σ-hole effect to facilitate the visible-light-triggered photolysis of phosphonium iodide salts, a charge-transfer complex, selectively giving fluoromethyl radicals. The usefulness and versatility of this new protocol are demonstrated through the mono-, di-, and trifluoromethylation of a variety of alkenes.

Chalcogen-Bonding Catalysis with Telluronium Cations

Chalcogen bonding results from non-covalent interactions occurring between electrodeficient chalcogen atoms and Lewis bases. Among the chalcogens, tellurium is the strongest Lewis acid, but Te-based compounds are scarcely used as organocatalysts. For the first time, telluronium cations demonstrated impressive catalytic properties at low loadings in three benchmark reactions: the Friedel-Crafts bromination of anisole, the bromolactonization of ω-unsaturated carboxylic acids and the aza-Diels-Alder between Danishefsky's diene and imines. The ability of telluronium cations to interact with a Lewis base through chalcogen bonding was demonstrated on the basis of multi-nuclear (¹⁷ O, ³¹ P, and ¹²⁵ Te) NMR analysis and DFT calculations.

Bioinspired Ether Cyclizations within a π-Basic Capsule Compared to Autocatalysis on π-Acidic Surfaces and Pnictogen-Bonding Catalysts

While the integration of supramolecular principles in catalysis attracts increasing attention, a direct comparative assessment of the resulting systems catalysts to work out distinct characteristics is often difficult. Herein is reported how the broad responsiveness of ether cyclizations to diverse inputs promises to fill this gap. Cyclizations in the confined, π-basic and Brønsted acidic interior of supramolecular capsules, for instance, are found to excel with speed (exceeding general Brønsted acid and hydrogen-bonding catalysts by far) and selective violations of the Baldwin rules (as extreme as the so far unique pnictogen-bonding catalysts). The complementary cyclization on π-acidic aromatic surfaces remains unique with regard to autocatalysis, which is shown to be chemo- and diastereoselective with regard to product-like co-catalysts but, so far, not enantioselective.

Azide···Oxygen Interaction: A Crystal Engineering Tool for Conformational Locking

We have designed, synthesized and crystallized 36 compounds, each containing an azide group and an oxygen atom separated by three bonds. Crystal structure analysis revealed that each of these molecules adopts a conformation in which the azide and oxygen groups orient syn to each other with a short O ··· N b  contact. Geometry-optimized structures [using  M06-2X/6-311G(d,p) level of theory ] also showed the syn conformation in all 36 of these cases, suggesting that this not merely a crystal packing effect. Quantum topological analysis using Bader's Atoms in Molecules (AIM) theory revealed bond paths and bond critical points (BCP) in these structures suggesting its nature and energetics to be similar to weak hydrogen bonding. The NCI-RDG plot clearly revealed the attractive interaction consisting of electrostatic or dispersive components in all the 36 systems. NBO analysis suggested a weak orbital-relaxation (charge-transfer) contribution of energy for a few  (sp2) O-donor systems. Natural population analysis (NPA) and molecular electrostatic potential mapping (MESP) of these crystal structures further revealed the existence of favorable azide-oxygen interaction.   A CSD search indicated the frequent and consistent occurrence of this interaction and its role dictating the syn conformation of azide and oxygen in molecules where these groups are separated by 2-4 bonds.

Noncovalent Interactions at Lanthanide Complexes

Lanthanide complexes have attracted a widespread attention due to their structural diversity, as well as multifunctional and tunable properties. The development of lanthanide based functional materials has often relied on the design of the secondary coordination sphere of the corresponding lanthanide complexes. For instance, usually simple lanthanide salts (solvento complexes) do not catalyze effectively organic reactions or provide low yield of the expected product, whereas the presence of a suitable organic ligand with a noncovalent bond donor or acceptor centre (secondary coordination sphere) modifies the symmetry around the metal centre in lanthanide complexes which then successfully can act as catalysts in both homogenous and heterogenous catalysis. In this minireview, we discuss several relevant examples, based on X-ray crystal structure analyses, in which the hydrogen, halogen, chalcogen, pnictogen, tetrel and rare-earth bonds, as well as cation-π, anion-π, lone pair-π, π-π and pancake interactions, are used as a synthon in the decoration of the secondary coordination sphere of lanthanide complexes.

Competing Effects of Chlorination on the Strength of Te⋅⋅⋅O Chalcogen Bonds Select the Structure of Mixed Supramolecular Macrocyclic Aggregates of Iso-Tellurazole N-Oxides

Chlorination of 3-methyl-5-phenyl-1,2-tellurazole-2-oxide yielded the λ⁴ Te dichloro derivative. Its crystal structure demonstrates that the heterocycle retains its ability to autoassociate by chalcogen bonding (ChB) forming macrocyclic tetramers. The corresponding Te⋅⋅⋅O ChB distances are 2.062 Å, the shortest observed to date in aggregates of this type. DFT-D3 calculations indicate that while the halogenated molecule is stronger as a ChB donor it also is a weaker ChB acceptor; the overall effect is that the ChBs in the chlorinated homotetramer are not significantly stronger. However, partial halogenation or scrambling selectively yield the 2 : 2 heterotetramer with alternating λ⁴ Te and λ² Te centers, which calculations identified as the thermodynamically preferred arrangement.

Cobaltoceniumselenolate Gold(I) Complexes: Synthesis, Spectroscopic, Structural and Anticancer Properties

Cobaltoceniumselenolate is an unusual, highly air-sensitive, mesoionic compound containing a very soft anionic selenium donor atom. Here we explore its coordination chemistry with Au(I) metal centers and show that its hetero- and homoleptic gold complexes are highly colored, air-stable compounds, which were characterized by 1H/13C/31P/77Se NMR, IR, UV-Vis, HR-MS and single crystal XRD. Cytotoxicity of these polar, water-soluble complexes was studied against various standard cancer cell lines (A549MDA-MB-231, HT-29) revealing good anticancer activity of all three complexes.

Chalcogen⋅⋅⋅π Bonding Catalysis

While the presence of sulfur⋅⋅⋅π bonding interaction is a general phenomenon in the biological systems, the exploitation of this noncovalent force in a chemical process yet remains elusive. Herein, we describe the concept of chalcogen⋅⋅⋅π bonding catalysis that activates molecules of π systems through the interaction between chalcogen and π-electron cloud. The proof-of-concept studies using a vinylindole-based Diels-Alder benchmark reaction demonstrate that S⋅⋅⋅π and Se⋅⋅⋅π bonding interaction can drive the cycloaddition reaction efficiently. Experimental results suggest that a simultaneously double Se⋅⋅⋅π bonding interaction directs the stereoselectivity in this cycloaddition process.

A Quantitative Molecular Orbital Perspective of the Chalcogen Bond

We have quantum chemically analyzed the structure and stability of archetypal chalcogen-bonded model complexes D2 Ch⋅⋅⋅A- (Ch = O, S, Se, Te; D, A = F, Cl, Br) using relativistic density functional theory at ZORA-M06/QZ4P. Our purpose is twofold: (i) to compute accurate trends in chalcogen-bond strength based on a set of consistent data; and (ii) to rationalize these trends in terms of detailed analyses of the bonding mechanism based on quantitative Kohn-Sham molecular orbital (KS-MO) theory in combination with a canonical energy decomposition analysis (EDA). At odds with the commonly accepted view of chalcogen bonding as a predominantly electrostatic phenomenon, we find that chalcogen bonds, just as hydrogen and halogen bonds, have a significant covalent character stemming from strong HOMO-LUMO interactions. Besides providing significantly to the bond strength, these orbital interactions are also manifested by the structural distortions they induce as well as the associated charge transfer from A- to D2 Ch.

Chemistry Evolves, Terms Evolve, but Phenomena Do Not Evolve: From Chalcogen-Chalcogen Interactions to Chalcogen Bonding

Chalcogen bonding is important in numerous aspects of chemistry, both in the solid state and in solution. Surveying the literature, it becomes clear that during its rebranding from chalcogen-chalcogen interactions, some parts of the community have somewhat neglected to recall its discovery and the initial studies referring to it in its previous guise. In this Viewpoint, we trace the path of research into this phenomenon, from its discovery, through its renaming, and to some of the varied and interesting chemistry it has led to so far, ranging from crystal engineering through supramolecular assembly to modern catalysis.

A Sterically Hindered Derivative of 2,1,3-Benzotelluradiazole: A Way to the First Structurally Characterised Monomeric Tellurium-Nitrogen Radical Anion

Interaction of the tetradentate redox-active 6,6'-[1,2-phenylenebis(azanediyl)]bis(2,4-di-tert-butylphenol) (H₄ L) with TeCl₄ leads to neutral diamagnetic compound TeL (1) in high yield. The molecule of 1 has a nearly planar TeN₂ O₂ fragment, which suggests the formulation of 1 as Te^II L^2- , in agreement with the results of DFT calculations and QTAIM and NBO analyses. Reduction of 1 with one equivalent of [CoCp₂ ] leads to quantitative formation of the paramagnetic salt [CoCp₂ ]⁺ [1]^.- , which was characterised by single-crystal XRD. The solution EPR spectrum of [CoCp₂ ]⁺ [1]^.- at room temperature features a quintet due to splitting on two equivalent ¹⁴ N nuclei. Below 150 K it turns into a broad singlet line with two weak satellites due to the splitting on the ¹²⁵ Te nucleus. Two-component relativistic DFT calculations perfectly reproduce the a(¹⁴ N) HFI constants and A_∥ (¹²⁵ Te) value responsible for the low-temperature satellite splitting. Calculations predict that the additional electron in 1^.- is localised mainly on L, while the spin density is delocalised over the whole molecule with significant localisation on the Te atom (≥30 %). All these data suggest that 1^.- can be regarded as the first example of a structurally characterised monomeric tellurium-nitrogen radical anion.

The Nature of Chalcogen-Bonding-Type Tellurium-Nitrogen Interactions: A First Experimental Structure from the Gas Phase

(C₆ F₅ )Te(CH₂ )₃ NMe₂ (1), a perfluorophenyltellurium derivative capable of forming intramolecular N⋅⋅⋅Te interactions, was prepared and characterized. The donor-free reference substance (C₆ F₅ )TeMe (2) and the unsupported adduct (C₆ F₅ )(Me)Te⋅NMe₂ Et (2 b) were studied in parallel. Molecular structures of 1, 2 and 2 b were determined by single-crystal X-ray diffraction and for 1 and 2 by gas-phase electron diffraction. The structure of 1 shows N⋅⋅⋅Te distances of 2.639(1) Å (solid) and 2.92(3) Å (gas). Ab initio plus NBO and QTAIM calculations show significant charge transfer effects within the N⋅⋅⋅Te interactions and indicate σ-hole interactions.

The Nature of Strong Chalcogen Bonds Involving Chalcogen-Containing Heterocycles

Chalcogen bonds are σ hole interactions and have been used in recent years as an alternative to hydrogen bonds. In general, the electrostatic potential at the chalcogen atom and orbital delocalization effects are made responsible for the orientation of the chalcogen bond. Here, we were able to show by means of SAPT calculations that neither the induction (orbital delocalization effects) nor the electrostatic term is causing the spatial orientation of strong chalcogen bonds in tellurium-containing aromatics. Instead, steric interactions (Pauli repulsion) are responsible for the orientation. Against chemical intuition the dispersion energies of the examined tellurium-containing aromatics are far less important for the net attractive forces compared to the energies in the corresponding sulfur and selenium compounds. Our results underline the importance of often overlooked steric interactions (Pauli repulsion) in conformational control of σ hole interactions.

Chalcogen-Bonding Interactions in Telluroether Heterocycles [Te(CH2 )m ]n (n=1-4; m=3-7)

The Te⋅⋅⋅Te secondary bonding interactions (SBIs) in solid cyclic telluroethers were explored by preparing and structurally characterizing a series of [Te(CH2 )m ]n (n=1-4; m=3-7) species. The SBIs in 1,7-Te2 (CH2 )10 , 1,8-Te2 (CH2 )12 , 1,5,9-Te3 (CH2 )9 , 1,8,15-Te3 (CH2 )18 , 1,7,13,19-Te4 (CH2 )20 , 1,8,15,22-Te4 (CH2 )24 and 1,9,17,25-Te4 (CH2 )28 lead to tubular packing of the molecules, as has been observed previously for related thio- and selenoether rings. The nature of the intermolecular interactions was explored by solid-state PBE0-D3/pob-TZVP calculations involving periodic boundary conditions. The molecular packing in 1,7,13,19-Te4 (CH2 )20 , 1,8,15,22-Te4 (CH2 )24 and 1,9,17,25-Te4 (CH2 )28 forms infinite shafts. The electron densities at bond critical points indicate a narrow range of Te⋅⋅⋅Te bond orders of 0.12-0.14. The formation of the shafts can be rationalized by frontier orbital overlap and charge transfer.