Triplet exciton dynamics of pure organics with halogen substitution boosted two photon absorption and room temperature phosphorescence: A theoretical perspective

Organic room temperature phosphorescence (RTP) molecules have shown promising applications in organic light emitting diodes and vivo imaging. Thus, triplet exciton dynamics in solid phase should be revealed and the molecule should possess large two photon absorption (TPA) cross sections under near-infrared excitation. The effects of halogen substitution and intermolecular interaction on RTP and TPA properties are studied at molecular level for a series of derivatives. Surrounding environment in solid phase is considered by combined quantum mechanics and molecular mechanics method. Intermolecular interactions are evaluated by the independent gradient model and calculated through the molecular force field energy decomposition method. Minimum energy crossing point, Huang-Rhys factor and reorganization energy are discussed, triplet exciton dynamics are investigated by thermal vibration correlation function method. Results indicate that the largest TPA cross sections are found for molecule in water. The halogen substitution can enlarge the proportion of (π, π*) and facilitate the intersystem crossing process. Restricted intramolecular rotation motions of dihedral angle in low frequency regions are found for Br-Np-Cz-BF₂ in solid phase. While enhanced vibrations of bond length and bond angle in high frequency regions are detected for I-Np-Cz-BF₂. Effects of halogen substitution and intermolecular interaction on triplet exciton dynamics are highlighted.

Thermotriggered Domino-like Single-Crystal-to-Single-Crystal Phase Transition from Face-to-Edge to Face-to-Face Packing of Anthracenes

Stimuli-triggered crystal-to-crystal and single-crystal-to-single-crystal (SCSC) transformations have received significant attention in the scientific community. To visualize such phenomenon, controlling the optical properties and the thermodynamic stability of the molecular crystals is a very important research subject. In this report, the selective growth of photoluminescent (PL) 1,8-bisphenylanthracene polymorphic (cI and cII) and 1,2-dichloroethane-inclusion crystals (iC) under various optimized conditions is described. These crystals exhibited unique mechano- and thermoresponsive disordering, crystal-to-crystal phase transition, and SCSC phase transition. In particular, rapid thermostimulus SCSC occurred from blue-PL cI into greenish-blue-PL cII. Interestingly, the SCSC phase transition of cI into cII was triggered by thermal stimuli and propagated spontaneously. Thermotriggered domino-like SCSC phase transition was observed on a fully visible timescale (ca. 125 μm min^-1 ).

Thermochromic aggregation-induced dual phosphorescence via temperature-dependent sp3-linked donor-acceptor electronic coupling

Aggregation-induced emission (AIE) has proven to be a viable strategy to achieve highly efficient room temperature phosphorescence (RTP) in bulk by restricting molecular motions. Here, we show that by utilizing triphenylamine (TPA) as an electronic donor that connects to an acceptor via an sp³ linker, six TPA-based AIE-active RTP luminophores were obtained. Distinct dual phosphorescence bands emitting from largely localized donor and acceptor triplet emitting states could be recorded at lowered temperatures; at room temperature, only a merged RTP band is present. Theoretical investigations reveal that the two temperature-dependent phosphorescence bands both originate from local/global minima from the lowest triplet excited state (T₁). The reported molecular construct serves as an intermediary case between a fully conjugated donor-acceptor system and a donor/acceptor binary mix, which may provide important clues on the design and control of high-freedom molecular systems with complex excited-state dynamics.

Multi-Mode Color-Tunable Long Persistent Luminescence in Single-Component Coordination Polymers

Materials with tunable long persistent luminescence (LPL) properties have wide applications in security signs, anti-counterfeiting, data encrypting, and other fields. However, the majority of reported tunable LPL materials are pure organic molecules or polymers. Herein, a series of metal-organic coordination polymers displaying color-tunable LPL were synthesized by the self-assembly of HTzPTpy ligand with different cadmium halides (X=Cl, Br, and I). In the solid state, their LPL emission colors can be tuned by the time-evolution, as well as excitation and temperature variation, realizing multi-mode dynamic color tuning from green to yellow or green to red, and are the first such examples in single-component coordination polymer materials. Single-crystal X-ray diffraction analysis and theoretical calculations reveal that the modification of LPL is due to the balanced action from single molecule and aggregate triplet excited states caused by an external heavy-atom effect. The results show that the rational introduction of different halide anions into coordination polymers can realize multi-color LPL.

The Aggregation Regularity Effect of Multiarylpyrroles on Their Near-Infrared Aggregation-Enhanced Emission Property

Increasing the quantum yield of near-infrared (NIR) emissive dyes is critical for biological applications because these fluorescent dyes generally show decreased emission efficiency under aqueous conditions. In this work, we designed and synthesized several multiarylpyrrole (MAP) derivatives, in which a furanylidene (FE) group at the 3-position of the pyrrole forms donor-π-acceptor molecules, MAP-FE, with a NIR emissive wavelength and aggregation-enhanced emission (AEE) features. Different alkyl chains of MAP-FEs linked to phenyl groups at the 2,5-position of the pyrrole ring resulted in different emissive wavelengths and quantum yields in aggregated states, such as powders or single crystals. Powder XRD data and single crystal analysis elucidated that the different lengths of alkyl chains had a significant impact on the regularity of MAP-FEs when they were forced to aggregate or precipitate, which affected the intermolecular interaction and the restriction degree of the rotating parts, which are essential components. Therefore, an increasing number of NIR dyes could be developed by this design strategy to produce efficient NIR dyes with AEE. Moreover, this method can provide general guidance for other related fields, such as organic solar cells and organic light-emitting materials, because they are all applied in the aggregated state.

Persistent Room Temperature Phosphorescence from Triarylboranes: A Combined Experimental and Theoretical Study

Achieving highly efficient phosphorescence in purely organic luminophors at room temperature remains a major challenge due to slow intersystem crossing (ISC) rates in combination with effective non-radiative processes in those systems. Most room temperature phosphorescent (RTP) organic materials have O- or N-lone pairs leading to low lying (n, π*) and (π, π*) excited states which accelerate kisc through El-Sayed's rule. Herein, we report the first persistent RTP with lifetimes up to 0.5 s from simple triarylboranes which have no lone pairs. RTP is only observed in the crystalline state and in highly doped PMMA films which are indicative of aggregation induced emission (AIE). Detailed crystal structure analysis suggested that intermolecular interactions are important for efficient RTP. Furthermore, photophysical studies of the isolated molecules in a frozen glass, in combination with DFT/MRCI calculations, show that (σ, B p)→(π, B p) transitions accelerate the ISC process. This work provides a new approach for the design of RTP materials without (n, π*) transitions.

Tunable lifetimes and efficiencies of room temperature phosphorescent liquids by modulating the length and number of alkyl chains

Organic room temperature phosphorescence (RTP) liquid composites exhibit the potential to make innovative changes in large area flexible lighting applications, and it is extremely challenging to achieve high-efficiency RTP in pure organic solvent-free liquid systems. The excited state properties and inner lighting mechanisms of these composites are unclear; therefore, a theoretical perspective to design high efficiency RTP liquids with tunable lifetime is highly desired. Herein, we systematically investigate the photophysical properties of a series of long swallow-tailed bromonaphthalimide (BT unit) molecules by the newly proposed optimally tuned range-separated (RS) functional method, and a state-of-the-art RTP molecule with an absolute quantum yield (ΦRTP) of 57.1% and a lifetime (τ) of 160 ms in solvent-free liquid is obtained. Moreover, theoretical results show that the energy gap between the lowest singlet excited state (S1) and triplet excited state (T1) can be reduced and the non-radiative energy consumption process can be restricted by modulating the length and number of alkyl chains in organic RTP molecules. Thus, a wise molecular design strategy is proposed and five additional efficient RTP molecules with tunable lifetimes (43, 19, 136, 0.11 and 0.005 ms) and efficiencies (11.3%, 6.8%, 5.9%, 0.2% and 0.05%) are theoretically proposed. This study sheds light on the relationship among molecular structure, lifetime and efficiency, and can provide an important prototype to explore high-efficiency RTP by pure organic solvent-free liquid systems.

Stimuli-Responsive Purely Organic Room-Temperature Phosphorescence Materials

This Minireview summarizes the recent progress of stimuli-responsive purely organic phosphorescence materials. Organic phosphorescence is closely related to the intermolecular interactions, because such interactions are beneficial to promote spin orbital coupling (SOC) and boost intersystem cross (ISC) efficiency and finally are conducive to satisfactory phosphorescence. It is found that the intermolecular interactions, which are essential for organic phosphorescence, are easily disturbed by external stimuli such as mechanical force, photon, acid, chemical vapor, leading to the luminescence change. According to this principle, various purely organic phosphorescence materials sensitive to external stimuli have been developed. This Minireview categorizes reported stimuli-responsive purely organic phosphorescence materials on the basis of different stimuli, including mechanochromism, mechanoluminescence, photoactivity, acid-responsiveness and other stimuli. Some prospective strategies for constructing stimuli-responsive purely organic phosphorescence molecules are provided.

Wide-Range Color-Tunable Organic Phosphorescence Materials for Printable and Writable Security Inks

Organic materials with long-lived, color-tunable phosphorescence are potentially useful for optical recording, anti-counterfeiting, and bioimaging. Herein, we develop a series of novel host-guest organic phosphors allowing dynamic color tuning from the cyan (502 nm) to orange red (608 nm). Guest materials are employed to tune the phosphorescent color, while the host materials interact with the guest to activate the phosphorescence emission. These organic phosphors have an ultra-long lifetime of 0.7 s and a maximum phosphorescence efficiency of 18.2 %. Although color-tunable inks have already been developed using visible dyes, solution-processed security inks that are temperature dependent and display time-resolved printed images are unprecedented. This strategy can provide a crucial step towards the next-generation of security technologies for information handling.

Enhanced Long Persistent Luminescence by Multifold Interpenetration in Metal-Organic Frameworks

Metal-organic frameworks (MOFs) with long persistent luminescence (LPL) have attracted widespread attention due to potential applications in displays, anticounterfeiting, and so on. However, MOFs often have large pore size, which restricts the formation of efficient inter- and intramolecular interactions to realize LPL. Herein, a new approach to achieving LPL in MOFs by multifold interpenetration of discrete frameworks is reported. By comparison between threefold- and twofold-interpenetrating MOFs, it was found that the former, which have higher multiplicity and denser frameworks, can be endowed with enhanced inter- and intramolecular interactions, and thus enhanced LPL is obtained. Meanwhile, metal-cluster and heavy-halogen effects could also cause variations in LPL duration and color.