Understanding noncovalent interactions: ligand binding energy and catalytic efficiency from ligand-induced reductions in motion within receptors and enzymes

Insight into the effect of UVC-based advanced oxidation processes on the interaction of typical microplastics and their derived disinfection byproducts during disinfection

The 10 µm polystyrene and polyethylene-terephthalate microplastics (MPs), prevalent in finished drink water, were employed to investigate the effect of normal dosage UVC-based advanced-oxidation-processes (UVC-AOPs) on the interaction between MPs and their derived disinfection-byproducts (DBPs) during subsequent chlorination-disinfection, in the presence of Br-, for the first time. The results indicated that UVC/H2O2 caused higher leaching of microplastic-derived dissolved-organic-matter (MP-DOM), with smaller and narrower molecular-weight-distribution than UVC and UVC/peroxymonosulfate (UVC/PMS). The trihalomethanes (as dominant DBPs) molar-formation-potentials (THMs-MFPs) for MP-DOM leached in different UVC-AOPs followed the order of UVC/H2O2>UVC/PMS>UVC. The adsorption of formed THMs, especially Br-THMs, back on MPs was observed in all MPs suspensions with or without UVC-AOPs pre-treatment. The Cl-THMs adsorption by MPs is more sensitive to UVC-AOPs than Br-THMs. The adsorption experiments showed that UVC-AOPs reduce the capacity but increase the rate of THMs adsorption by MPs, suggesting the halogen and hydrogen bonding forces governed the THMs adsorption rate while hydrophobic interaction determines their adsorption capacity. The UVC-AOPs pre-treatment sharply increased the total yield of THMs via both indirectly inducing MP-DOM leaching and directly increasing the THMs-MFPs of MPs by oxidation. 21.36-41.96% of formed THMs adsorbed back on the UVC-AOPs-pretreated MPs, which might increase the toxicity of MPs.

Isoliquiritigenin: a potential drug candidate for the management of erectile dysfunction

OBJECTIVE

This study aimed to assess the erectogenic properties of isoliquiritigenin taking sildenafil (SDF) as the standard.

METHODS

The binding affinity of isoliquiritigenin (ISL) with the erectile marker proteins (endothelial nitric oxide synthase [eNOS] and enzyme phosphodiesterase type 5 [PDE5]) was investigated using Autodock Vina, which was validated using molecular dynamics simulation. Furthermore, the effect of ISL on the eNOS and PDE5 messenger ribonucleic acid (mRNA) expression and the sexual behavior of mice was investigated, along with the assessment of the pharmacokinetics of ISL.

KEY FINDINGS

The results revealed that the binding affinity of ISL-eNOS/PDE5 and SDF-eNOS/PDE5 was in the range of -7.5 to -8.6 kcal/mol. The ISL-eNOS/PDE5 complexes remained stable throughout the 100 ns simulation period. Root mean square deviation, Rg, SASA, hydrogen, and hydrophobic interactions were similar between ISL-eNOS/PDE5 and SDF-eNOS/PDE5. Analysis of mRNA expressions in paroxetine (PRX)-induced ED mice showed that the co-administration of PRX with ISL reduced PDE5 and increased eNOS mRNA expression, similar to the co-administered group (PRX+SDF). The sexual behavior study revealed that the results of PRX+ISL were better than those of the PRX+SDF group. Pharmacokinetic evaluation further demonstrated that ISL possesses drug-like properties.

CONCLUSIONS

The results showed that ISL is equally potent as SDF in terms of binding affinity, specific pharmacological properties, and modulating sexual behavior.

Structural, computational and in silico studies of 4-bromo-3-flurobenzonitrile as anti-Alzheimer and anti-Parkinson agents

A novel dimer of the 4-bromo-3-fluorobenzonitrile was crystallized and studied using a spectroscopic method such as the scanning electron microscope method. The computational simulations substantiated the structural analysis findings. The Hirshfeld surface analysis has been performed for visualizing, exploring and quantifying the intra and inter-molecular interactions that stabilize the crystal packing of the compound. The NBO and QTAIM analyses were applied to study the nature and origin of the attractive forces involved in the crystal structure. Further, the pharmacokinetic properties of the compound were evaluated, indicating good brain-blood barrier and central nervous system penetration capability. Hence, in silico studies was carried out to explore the binding pattern of the titled compound against acetylcholinesterase and butyrylcholinesterase, and tumor necrosis factor-alpha converting enzyme proteins using molecular docking and molecular dynamics simulations approach. Further, the titled compound is compared with standard drugs through molecular docking studies. The in silico studies finally predicts that the compound under investigation may act as a good inhibitor for treating Alzheimer's disease and further in vitro and in vivo studies may provide its therapeutic potential.Communicated by Ramaswamy H. Sarma.

Entropy-Enthalpy Compensation in Electron-Transfer Processes

Solvent reorganization energies, free energies, and entropies are obtained for photoexcitation of three molecules that exhibit strong solvatochromism [Nile red, 5-(dimethylamino)-5'-nitro-2,2-bisthiophene, and Reichardt's dye B30] by measuring their optical absorption spectra at temperatures between 150 and 300 K in solvents with a range of polarities. Energies, free energies, and entropies of solvent reorganization are also obtained from computer simulations of three intramolecular electron-transfer reactions (charge separation and recombination in Zn-porphyrin-quinone cyclophane and charge transfer in a bis-biphenylandrostane radical anion). Entropy-enthalpy compensation in the solvent reorganization free energy for photoexcitation or electron transfer is found to be essentially complete (having nearly equal and opposite contributions from entropic and enthalpic effects) for all of the processes with solvent reorganization energies less than about 0.1 eV. Compensation becomes less complete as the reorganization energy becomes larger. A semiclassical treatment of the solvent reorganization entropy can rationalize these results.

Chiral Induced Spin Selectivity

Since the initial landmark study on the chiral induced spin selectivity (CISS) effect in 1999, considerable experimental and theoretical efforts have been made to understand the physical underpinnings and mechanistic features of this interesting phenomenon. As first formulated, the CISS effect refers to the innate ability of chiral materials to act as spin filters for electron transport; however, more recent experiments demonstrate that displacement currents arising from charge polarization of chiral molecules lead to spin polarization without the need for net charge flow. With its identification of a fundamental connection between chiral symmetry and electron spin in molecules and materials, CISS promises profound and ubiquitous implications for existing technologies and new approaches to answering age old questions, such as the homochiral nature of life. This review begins with a discussion of the different methods for measuring CISS and then provides a comprehensive overview of molecules and materials known to exhibit CISS-based phenomena before proceeding to identify structure-property relations and to delineate the leading theoretical models for the CISS effect. Next, it identifies some implications of CISS in physics, chemistry, and biology. The discussion ends with a critical assessment of the CISS field and some comments on its future outlook.

Mechanistic insight into the role of typical microplastics in chlorination disinfection: Precursors and adsorbents of both MP-DOM and DBPs

Microplastics (MPs) in drinking water are predominantly < 10 µm. The leaching of MPs derived dissolved organic matters (MP-DOM) from 5 µm polypropylene MPs (PP-MPs) and polystyrene MPs (PS-MPs) and the formation of MP-DOM derived disinfection byproducts during chlorination disinfection were first investigated. Comparably, PS-MPs are more vulnerable to chlorination and the primary attacks are on para C in aromatic side-chains via electrophilic Cl-substitution and oxidation by two-electron transfer. The O/C and Cl/C ratio of polystyrene MPs was linear and exponential versus initial available Cl2 concentrations, respectively. The significant PS-DOM leaching was observed with initial available Cl2 of 4.0 mg/L (USEPA recommended upper dose). As the initial available Cl2 concentration increased to 8.0 mg/L, the adsorption of chloro-phenolic-components of 200 Daltons in PS-DOM by 5 µm PS-MPs was observed for the first time. Trichloromethane (TCM) was identified as the dominant disinfection byproduct with a formation potential of 60.3 ± 7.8 and 73.7 ± 9.8 μg/mg for PS-DOM and PP-DOM, respectively. The derived TCM could adsorb onto PS-MPs followed the pseudo-second-order kinetic and Langmuir isotherm models. Extreme chlorination could reduce the maximal adsorption capacity of TCM on 5 µm PS-MPs from 196.68 ± 48.66 to 146.02 ± 32.98 μg/g. Thus, PS-MPs act as precursors and carriers of TCM in chlorination.

Elucidation of Protonation Cooperativity of a STING-Activating Polymer

Stimuli-responsive nanomaterials have the potential to improve the performance and overcome existing barriers of conventional nanotherapeutics. Molecular cooperativity design in stimuli-responsive nanomedicine can amplify physiological signals, enabling a cooperative response for improved diagnostic and therapeutic precision. Previously, this work reported an ultra-pH-sensitive polymer, PEG-b-PC7A, that possesses innate immune activating properties by binding to the stimulator of interferon genes (STING) through polyvalent phase condensation. This interaction enhances STING activation and synergizes with the endogenous STING ligand for robust cancer immunotherapy. Despite its successes in innate immune activation, the fundamental physicochemical and pH-responsive properties of PC7A require further investigation. Here, this study elucidates the protonation cooperativity driven by the phase transition of PC7A copolymer. The highly cooperative system displays an "all-or-nothing" proton distribution between highly charged unimer (all) and neutral micelle (nothing) states without gradually protonated intermediates. The binary protonation behavior is further illustrated in pH-precision-controlled release of a representative anticancer drug, β-lapachone, by PC7A micelles over a noncooperative PE5A polymer. Furthermore, the bimodal distribution of protons is represented by a high Hill coefficient (nH  > 9), featuring strong positive cooperativity. This study highlights the nanoscale pH cooperativity of an immune activating polymer, providing insights into the physicochemical characterization and design parameters for future nanotherapeutics development.

Anti-Inflammatory Activity of the Constituents from the Leaves of Perilla frutescens var. acuta

Perilla frutense var. acuta (Lamiaceae) has been used to treat indigestion, asthma, and allergies in traditional medicine. In this study, luteolin 7-O-diglucuronide (1), apigenin 7-O-diglucuronide (2), and rosmarinic acid (3) were isolated from the leaves of P. frutescens var. acuta through various chromatographic purification techniques. Several approaches were used to investigate the anti-inflammatory activity of the constituents (1-3) and their working mechanisms. In silico docking simulation demonstrated that 1-3 would work as a PPAR-α/δ/γ agonist, and in vitro PPAR-α/δ/γ transcriptional assay showed that the Perilla water extract (PWE) and 3 increased PPAR-α luciferase activity (1.71 and 1.61 times of the control (PPAR-α + PPRE, p < 0.001)). In the NF-κB luciferase assay, 1 suppressed NF-κB activity the most (56.83% at 5 µM; 74.96% at 10 µM; 79.86% at 50 µM). In addition, 1 and 2 inhibited the mRNA expression of NF-κB target genes, including Il6, Mcp1, and Tnfa, at 50 µM, and 3 suppressed the genes at the mRNA level in a dose-dependent manner. We report that 1 and 2 exert anti-inflammatory effects through NF-κB inhibition, and the PPAR-α/NF-κB signaling pathway is related to the anti-inflammatory activity of 3.

GAS41 promotes H2A.Z deposition through recognition of the N terminus of histone H3 by the YEATS domain

Glioma amplified sequence 41 (GAS41), which has the Yaf9, ENL, AF9, Taf14, and Sas5 (YEATS) domain that recognizes lysine acetylation (Kac), regulates gene expression as a subunit of the SRCAP (SNF2-related CREBBP activator protein) complex that deposits histone H2A.Z at promoters in eukaryotes. The YEATS domains of the proteins AF9 and ENL recognize Kac by hydrogen bonding the aromatic cage to arginine situated just before K9ac or K27ac in the N-terminal tail of histone H3. Curiously, the YEATS domain of GAS41 binds most preferentially to the sequence that contains K14ac of H3 (H3K14ac) but lacks the corresponding arginine. Here, we biochemically and structurally elucidated the molecular mechanism by which GAS41 recognizes H3K14ac. First, stable binding of the GAS41 YEATS domain to H3K14ac required the N terminus of H3 (H3NT). Second, we revealed a pocket in the GAS41 YEATS domain responsible for the H3NT binding by crystallographic and NMR analyses. This pocket is away from the aromatic cage that recognizes Kac and is unique to GAS41 among the YEATS family. Finally, we showed that E109 of GAS41, a residue essential for the formation of the H3NT-binding pocket, was crucial for chromatin occupancy of H2A.Z and GAS41 at H2A.Z-enriched promoter regions. These data suggest that binding of GAS41 to H3NT via its YEATS domain is essential for its intracellular function.

On the Importance of Halogen and Chalcogen Bonds in the Solid State of Nucleic Acids: A Combined Crystallographic and Theoretical Perspective

In this work, intra- and intermolecular halogen and chalcogen bonds (HlgBs and ChBs, respectively) present in the solid state of nucleic acids (NAs) have been studied at the RI-MP2/def2-TZVP level of theory. To achieve this, a Protein Data Bank (PDB) survey was carried out, revealing a series of structures in which Br/I or S/Se/Te atoms belonging to nucleobases or pentose rings were involved in noncovalent interactions (NCIs) with electron-rich species. The energetics and directionality of these NCIs were rationalized through a computational study, which included the use of Molecular Electrostatic Potential (MEP) surfaces, the Quantum Theory of Atoms in Molecules (QTAIM), and Non Covalent Interaction plot (NCIplot) and Natural Bonding Orbital (NBO) techniques.

Modeling of magnesium-decorated graphene quantum dot nanostructure for trapping AsH3, PH3 and NH3 gases

A magnesium-decorated graphene quantum dot (C₂₄H₁₂-Mg) surface has been examined theoretically using density functional theory (DFT) computations at the ωB97XD/6-311++G(2p,2d) level of theory to determine its sensing capability toward XH₃ gases, where X = As, N and P, in four different phases: gas, benzene solvent, ethanol solvent and water. This research was carried out in different phases in order to predict the best possible phase for the adsorption of the toxic gases. Analysis of the electronic properties shows that in the different phases the energy gap follows the order NH₃@C₂₄H₁₂-Mg < PH₃@C₂₄H₁₂-Mg < AsH₃@C₂₄H₁₂-Mg. The results obtained from the adsorption studies show that all the calculated adsorption energies are negative, indicating that the nature of the adsorption is chemisorption. The adsorption energies can be arranged in an increasing trend of NH₃@C₂₄H₁₂-Mg < PH₃@C₂₄H₁₂-Mg < AsH₃@C₂₄H₁₂-Mg. The best adsorption performance was noted in the gas phase compared to the other studied counterparts. The interaction between the adsorbed gases and the surfaces shows a non-covalent interaction nature, as confirmed by the quantum theory of atoms-in-molecules (QTAIM) and non-covalent interactions (NCI) analysis. The overall results suggest that we can infer that the surface of the magnesium-decorated graphene quantum dot C₂₄H₁₂-Mg is more efficient for sensing the gas AsH₃ than PH₃ and NH₃.

New Approved Drugs Appearing in the Pharmaceutical Market in 2022 Featuring Fragments of Tailor-Made Amino Acids and Fluorine

The strategic fluorination of oxidatively vulnerable sites in bioactive compounds is a relatively recent, widely used approach allowing us to modulate the stability, bio-absorption, and overall efficiency of pharmaceutical drugs. On the other hand, natural and tailor-made amino acids are traditionally used as basic scaffolds for the development of bioactive molecules. The main goal of this review article is to emphasize these general trends featured in recently approved pharmaceutical drugs.

Rational In Silico Design of Molecularly Imprinted Polymers: Current Challenges and Future Potential

The rational design of molecularly imprinted polymers has evolved along with state-of-the-art experimental imprinting strategies taking advantage of sophisticated computational tools. In silico methods enable the screening and simulation of innovative polymerization components and conditions superseding conventional formulations. The combined use of quantum mechanics, molecular mechanics, and molecular dynamics strategies allows for macromolecular modelling to study the systematic translation from the pre- to the post-polymerization stage. However, predictive design and high-performance computing to advance MIP development are neither fully explored nor practiced comprehensively on a routine basis to date. In this review, we focus on different steps along the molecular imprinting process and discuss appropriate computational methods that may assist in optimizing the associated experimental strategies. We discuss the potential, challenges, and limitations of computational approaches including ML/AI and present perspectives that may guide next-generation rational MIP design for accelerating the discovery of innovative molecularly templated materials.

Characterization of ligand-induced thermal stability of the human organic cation transporter 2 (OCT2)

Introduction: The human organic cation transporter 2 (OCT2) is involved in the transport of endogenous quaternary amines and positively charged drugs across the basolateral membrane of proximal tubular cells. In the absence of a structure, the progress in unraveling the molecular basis of OCT2 substrate specificity is hampered by the unique complexity of OCT2 binding pocket, which seemingly contains multiple allosteric binding sites for different substrates. Here, we used the thermal shift assay (TSA) to better understand the thermodynamics governing OCT2 binding to different ligands.

Methods: Molecular modelling and in silico docking of different ligands revealed two distinct binding sites at OCT2 outer part of the cleft. The predicted interactions were assessed by cis-inhibition assay using [3H]1-methyl-4-phenylpyridinium ([3H]MPP+) as a model substrate, or by measuring the uptake of radiolabeled ligands in intact cells. Crude membranes from HEK293 cells harboring human OCT2 (OCT2-HEK293) were solubilized in n-Dodecyl-β-D-Maltopyranoside (DDM), incubated with the ligand, heated over a temperature gradient, and then pelleted to remove heat-induced aggregates. The OCT2 in the supernatant was detected by western blot.

Results: Among the compounds tested, cis-inhibition and TSA assays showed partly overlapping results. Gentamicin and methotrexate (MTX) did not inhibit [3H]MPP+ uptake but significantly increased the thermal stabilization of OCT2. Conversely, amiloride completely inhibited [3H]MPP+ uptake but did not affect OCT2 thermal stabilization. [3H]MTX intracellular level was significantly higher in OCT2-HEK293 cells than in wild type cells. The magnitude of the thermal shift (ΔTm) did not provide information on the binding. Ligands with similar affinity showed markedly different ΔTm, indicating different enthalpic and entropic contributions for similar binding affinities. The ΔTm positively correlated with ligand molecular weight/chemical complexity, which typically has high entropic costs, suggesting that large ΔTm reflect a larger displacement of bound water molecules.

Discussion: In conclusion, TSA might represent a viable approach to expand our knowledge on OCT2 binding descriptors.

A Comprehensive Ab Initio Study of Halogenated A···U and G···C Base Pair Geometries and Energies

Unraveling the binding preferences involved in the formation of a supramolecular complex is key to properly understand molecular recognition and aggregation phenomena, which are of pivotal importance to biology. The halogenation of nucleic acids has been routinely carried out for decades to assist in their X-ray diffraction analysis. The incorporation of a halogen atom on a DNA/RNA base not only affected its electronic distribution, but also expanded the noncovalent interactions toolbox beyond the classical hydrogen bond (HB) by incorporating the halogen bond (HalB). In this regard, an inspection of the Protein Data Bank (PDB) revealed 187 structures involving halogenated nucleic acids (either unbound or bound to a protein) where at least 1 base pair (BP) exhibited halogenation. Herein, we were interested in disclosing the strength and binding preferences of halogenated A···U and G···C BPs, which are predominant in halogenated nucleic acids. To achieve that, computations at the RI-MP2/def2-TZVP level of theory together with state of the art theoretical modeling tools (including the computation of molecular electrostatic potential (MEP) surfaces, the quantum theory of “Atoms in Molecules” (QTAIM) and the non-covalent interactions plot (NCIplot) analyses) allowed for the characterization of the HB and HalB complexes studied herein.

Surface supramolecular assemblies tailored by chemical/physical and synergistic stimuli: a scanning tunneling microscopy study

Supramolecular self-assemblies formed by various non-covalent interactions can produce diverse functional networks on solid surfaces. These networks have recently attracted much interest from both fundamental and application points of view. Unlike covalent organic frameworks (COFs), the properties of the assemblies differ from each other depending on the constituent motifs. These various motifs may find diverse applications such as in crystal engineering, surface modification, and molecular electronics. Significantly, these interactions between/among the molecular tectonics are relatively weak and reversible, which makes them responsive to external stimuli. Moreover, for a liquid-solid-interface environment, the dynamic processes are amenable to in situ observation using scanning tunneling microscopy (STM). In the literature, most review articles focus on supramolecular self-assembly interactions. This review summarizes the recent literature in which stimulation sources, including chemical, physical, and their combined stimuli, cooperatively tailor supramolecular assemblies on surfaces. The appropriate design and synthesis of functional molecules that can be integrated on different surfaces permits the use of nanostructured materials and devices for bottom-up nanotechnology. Finally, we discuss synergic effect on materials science.

Mechanistic insights into the crystallization of coamorphous drug systems

In our previous study, the coamorphous formulation of lurasidone hydrochloride (LH) with saccharin (SAC) showed significantly enhanced dissolution and physical stability compared to crystalline/amorphous LH. However, the coamorphous system is still in amorphous state, and has the tendency to recrystallization, which will in turn result in the loss of above advantages. In this study, the crystallization kinetics under isothermal and non-isothermal conditions was investigated. Compared to amorphous LH, coamorphous LH-SAC showed 68.3-361.2 and 2.6-6.1 times lower crystallization rates in glassy state and supercooled liquid state, respectively. After co-amorphization, the addition of SAC changed the crystallization mechanism of amorphous LH from nucleation-controlled to diffusion-controlled manner. Amorphous LH followed the site-saturated nucleation, whereas the coamorphous system exhibited a fixed number of nuclei. The non-isothermal crystallization indicated amorphous LH and coamorphous LH-SAC showed two-dimensional (JMAEK 2) and three-dimensional (JMAEK 3) growth of nuclei, respectively. Furthermore, coamorphous LH-SAC exhibited higher molecular mobility and dynamic fragility (m_D) than amorphous LH, which is kinetically unfavorable for its physical stability. However, from thermodynamic perspective, coamorphous LH-SAC had a higher configurational entropy, i.e., a higher entropy barrier for crystallization, which is beneficial to hinder its crystallization. Therefore, it was concluded that the higher configurational entropy rather than the molecular mobility was proposed to be responsible for its improved stability. In addition, molecular dynamics simulations with miscibility, radial distribution function and binding energy calculations suggested coamorphous components exhibited good miscibility and strong intermolecular interactions, which was also conductive to the enhancement in its stability. This study offers an in-depth understanding about the effect of the coformer on the crystallization kinetics of coamorphous systems, and points out the important contribution of the configurational entropy in stabilizing the coamorphous systems.

Effects of polystyrene nanoplastics with different functional groups on the accumulation and toxicity of Pb on dandelion

Micro (Nano)plastics are ubiquitous in the environment and can potentially affect the toxic effects of other chemicals, such as heavy metals. Although the interaction of micro (nano)plastics and heavy metals as well as their effects on aquatic organisms have been widely investigated, studies on their influence on terrestrial plants are limited. Therefore, in this study, the effects of polystyrene (PS), carboxy-modified PS (CPS) and amino-modified PS (APS) nanoparticles on the accumulation and toxicity of Pb on dandelion (Taraxacum asiaticum Dahlst) were investigated using hydroponic cultivation. The presence of the three PS caused cell damage and destroyed the tertiary structure of the ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) and dehydrogenase (DHA) enzymes, thereby inhibiting Rubisco and root activities, which hindered nutrient uptake and photosynthesis. The inhibition of APS on the biomass of dandelion was greater than that of PS and CPS. Confocal laser scanning microscope and transmission electron microscopy analysis showed that APS was more likely to enter the roots of dandelion than PS and CPS. The presence of Pb induced more PS, CPS, and APS to enter dandelion roots, and Pb aggravated PS and CPS toxicities on dandelion rather than APS toxicity. This is because the complex formed by CPS and Pb can affect the structure of Rubisco and DHA through covalent and coordination bonds, and Pb increased the surface positive charge on CPS, according to Gaussian analysis. The presence of both PS and CPS significantly reduced Pb uptake by dandelion, and they did not exacerbate the toxicity of Pb. In contrast, APS slightly inhibited Pb accumulation, but aggravated Pb toxicity in dandelion. Our findings revealed that the changes in the uptake of nanoplastics and Pb by dandelion potentially resulted in a cascade of events that increased the toxicity and inhibited the growth of dandelion seedlings.

Impacts of noncovalent interactions involving sulfur atoms on protein stability, structure, folding, and bioactivity

This review discusses the various types of noncovalent interactions in which sulfur atoms participate and their effects on protein stability, structure, folding and bioactivity. Current approaches and recommendations for modelling these noncovalent interactions (in terms of both geometries and interaction energies) are highlighted.

Harnessing the cyclization strategy for new drug discovery

The design of new ligands with high affinity and specificity against the targets of interest has been a central focus in drug discovery. As one of the most commonly used methods in drug discovery, the cyclization represents a feasible strategy to identify new lead compounds by increasing structural novelty, scaffold diversity and complexity. Such strategy could also be potentially used for the follow-on drug discovery without patent infringement. In recent years, the cyclization strategy has witnessed great success in the discovery of new lead compounds against different targets for treating various diseases. Herein, we first briefly summarize the use of the cyclization strategy in the discovery of new small-molecule lead compounds, including the proteolysis targeting chimeras (PROTAC) molecules. Particularly, we focus on four main strategies including fused ring cyclization, chain cyclization, spirocyclization and macrocyclization and highlight the use of the cyclization strategy in lead generation. Finally, the challenges including the synthetic intractability, relatively poor pharmacokinetics (PK) profiles and the absence of the structural information for rational structure-based cyclization are also briefly discussed. We hope this review, not exhaustive, could provide a timely overview on the cyclization strategy for the discovery of new lead compounds.

Effect of co-toxicity of lead and nanoplastics on the flavonoid biosynthetic pathway in dandelion (Taraxacum asiaticum Dahlst)

Negatively charged carboxy-polystyrene (CPS) and positively charged amino-polystyrene (NPS) could significantly inhibit the biomass and flavonoid content of dandelion roots and leaves, and the inhibitory effect of NPS was stronger than that of CPS. The increasingly serious pollution of microplastics and heavy metals is likely to affect the efficacy of flavonoids synthesized by dandelion in natural medicine fields. Therefore, we combined hydroponic experiments with computational chemistry (Gaussian and autodock analysis) to explore the mechanism by which amino-polystyrene (NPS), carboxy-polystyrene (CPS), and lead affect the flavonoid biosynthetic pathway in dandelion (Taraxacum asiaticum Dahlst). Our results show that CPS and NPS could significantly inhibit the biomass and flavonoid content of dandelion roots and leaves, and the inhibitory effect of NPS was stronger than that of CPS. Mechanistic studies showed that CPS and NPS increased the content of O₂^- and H₂O₂ in dandelion roots and leaves, causing membrane lipid peroxidation, resulting in cell damage and decreased biomass. CPS and NPS inhibited related enzymatic activities by affecting their tertiary structures, resulting in a decrease in phenolic acid, coumaroyl-CoA, and flavonoid content. Dandelion preferred to absorb positively charged NPS compared to negatively charged CPS, but CPS inhibited the uptake of Pb by dandelion more strongly than NPS. Pb promoted CPS agglomeration and increased the surface positive charge of CPS through coordination bonds and hydrogen bonds, so more CPS entered dandelion under CPS + Pb treatment than under CPS alone. Although NPS and CPS reduced the uptake of Pb by dandelion, the biomass and flavonoid contents of dandelion were lower than those of single Pb treatment because of the higher toxicity of NPS and CPS than Pb. Pb significantly increased the effect of CPS on the root biomass of dandelion compared with CPS alone by increasing the positive charge of CPS. We suggest that microplastics with different charges and lead composite pollution inhibit dandelion flavonoid biosynthesis and provide a reference for the loss of dandelion medicinal components and economic value.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.

QM/MM Simulations Reveal the Determinants of Carbapenemase Activity in Class A β-Lactamases

β-lactam antibiotic resistance in Gram-negative bacteria, primarily caused by β-lactamase enzymes that hydrolyze the β-lactam ring, has become a serious clinical problem. Carbapenems were formerly considered "last resort" antibiotics because they escaped breakdown by most β-lactamases, due to slow deacylation of the acyl-enzyme intermediate. However, an increasing number of Gram-negative bacteria now produce β-lactamases with carbapenemase activity: these efficiently hydrolyze the carbapenem β-lactam ring, severely limiting the treatment of some bacterial infections. Here, we use quantum mechanics/molecular mechanics (QM/MM) simulations of the deacylation reactions of acyl-enzyme complexes of eight β-lactamases of class A (the most widely distributed β-lactamase group) with the carbapenem meropenem to investigate differences between those inhibited by carbapenems (TEM-1, SHV-1, BlaC, and CTX-M-16) and those that hydrolyze them (SFC-1, KPC-2, NMC-A, and SME-1). QM/MM molecular dynamics simulations confirm the two enzyme groups to differ in the preferred acyl-enzyme orientation: carbapenem-inhibited enzymes favor hydrogen bonding of the carbapenem hydroxyethyl group to deacylating water (DW). QM/MM simulations of deacylation give activation free energies in good agreement with experimental hydrolysis rates, correctly distinguishing carbapenemases. For the carbapenem-inhibited enzymes, free energies for deacylation are significantly higher than for the carbapenemases, even when the hydroxyethyl group was restrained to prevent interaction with the DW. Analysis of these simulations, and additional simulations of mutant enzymes, shows how factors including the hydroxyethyl orientation, the active site volume, and architecture (conformations of Asn170 and Asn132; organization of the oxyanion hole; and the Cys69-Cys238 disulfide bond) collectively determine catalytic efficiency toward carbapenems.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

Positive Cooperativity Induced by Interstrand Interactions in Silver(I) Complexes with α,α′‐Diimine Ligands

The allosteric positive cooperativity accompanying the formation of compact [Cu^I(α,α′‐diimine)₂]⁺ building blocks contributed to the historically efficient synthesis of metal‐containing catenates and knotted assemblies. However, its limited magnitude can easily be overcome by the negative chelate cooperativity that controls the overall formation of related polymetallic multistranded helicates and grids. Despite the more abundant use of analogous dioxygen‐resistant [Ag^I(α,α′‐diimine)₂]⁺ units in modern entangled metallo‐supramolecular assemblies, a related thermodynamic justification was absent. Solid‐state structural characterizations show the successive formation of [Ag^I(α,α′‐diimine)(CH₃CN)][X] and [Ag^I(α,α′‐diimine)₂][X] upon the stepwise reactions of α,α′‐diimine=2,2′‐bipyridine (bpy) or 1,10‐phenanthroline (phen) derivatives with AgX (X=BF₄⁻, ClO₄⁻, PF₆⁻). In room‐temperature, 5–10 mM acetonitrile solutions, these cationic complexes exist as mixtures in fast exchange on the NMR timescale. Spectrophotometric titrations using the unsubstituted bpy and phen ligands point to the statistical (=non‐cooperative) binding of two successive bidentate ligands around Ag^I, a mechanism probably driven by the formation of hydrophobic belts, that overcomes the unfavorable decrease in the positive charge borne by the metallic cation. Surprisingly, the addition of methyl groups adjacent to the nitrogen donors (6,6′ positions in dmbpy; 2,9 positions in dmphen) induces positive cooperativity for the formation of [Ag(dmbpy)₂]⁺ and [Ag(dmphen)₂]⁺, a trend assigned to additional stabilizing interligand interactions. Adding rigid and polarizable phenyl side arms in [Ag(Brdmbpy)₂]⁺ further reinforces the positively cooperative process, while limiting the overall decrease in metal–ligand affinity.

Gelation switch of polyamorphic indomethacin depending on the thermal procedure

Amorphous indomethacin (IMC) prepared under different thermal procedures via melt quenching method showed significantly different dissolution behaviors. This study aims to investigate the influence of thermal procedures on the formation of IMC polyamorphism and to explore the mechanism for their different dissolution behaviors. Amorphous IMC samples were prepared by melting crystalline IMC under a series of temperatures (160-195 °C), respectively, followed by quenching in liquid nitrogen. Samples obtained under 170 °C exhibited bi-halo shapes at ∼15° and ∼26° (2θ), while the ones above 175 °C showed a single halo at ∼21° (2θ), suggesting amorphous IMC prepared under different thermal procedures probably have different local molecular arrangements. In comparison to crystalline IMC, amorphous IMC obtained under 170 °C showed significantly higher dissolution profiles with good dispersibility in aqueous medium, however, all amorphous IMC samples prepared above 175 °C demonstrated much lower dissolution with significant gelation, which seemed like a gelation switch existed for polyamorphic IMC when the preparation temperature was between 170 and 175 °C. Based on physicochemical characterizations, amorphous IMC prepared under 170 °C had higher surface free energy, more surficial hydrophilic groups and better wettability than the ones made above 175 °C. Molecular dynamics simulations revealed that the amorphous samples prepared below 170 °C had similar binding energy values in the range of 310.045-325.479 kcal/mol, while those prepared above 175 °C were significantly lower within 212.193-235.073 kcal/mol. Such binding energy difference might be responsible for their different local molecular arrangements after different thermal procedures. The current study deeply reminds us that the thermal procedure of preparation methods may significantly affect the physicochemical properties of amorphous materials, which should be paid special attention to the polymorphic selection during pharmaceutical development.

Identification of the most damaging nsSNPs in the human CFL1 gene and their functional and structural impacts on cofilin-1 protein

The cofilin-1 protein, encoded by CFL1, is an actin-binding protein that regulates F-actin depolymerization and nucleation activity through phosphorylation and dephosphorylation. CFL1 has been implicated in the development of neurodegenerative diseases (Alzheimer's disease and Huntington's disease), neuronal migration disorders (lissencephaly, epilepsy, and schizophrenia), and neural tube closure defects. Mutations in CFL1 have been associated with impaired neural crest cell migration and neural tube closure defects. In our study, various computational approaches were utilized to explore single-nucleotide polymorphisms (SNPs) in CFL1. The Variation Viewer and gnomAD databases were used to retrieve CFL1 SNPs, including 46 nonsynonymous SNPs (nsSNPs). The functional and structural annotation of SNPs was performed using 12 sequence-based web applications, which identified 20 nsSNPs as being the most likely to be deleterious or disease-causing. The conservation of cofilin-1 protein structures was illustrated using the ConSurf and PROSITE web servers, which projected the 12 most deleterious nsSNPs onto conserved domains, with the potential to disrupt the protein's functionality. These 12 nsSNPs were selected for protein structure construction, and the DynaMut/DUET servers predicted that the protein variants V7G, L84P, and L99A were the most likely to be damaging to the cofilin-1 protein structure or function. The evaluation of molecular docking studies demonstrated that the L99A and L84P cofilin-1 variants reduce the binding affinity for actin compared with the native cofilin-1 structure, and molecular dynamic simulation studies confirmed that these variants might destabilize the protein structure. The consequences of putative mutations on protein-protein interactions and post-translational modification sites in the cofilin-1 protein structure were analyzed. This study represents the first complete approach to understanding the effects of nsSNPs within the actin-depolymerizing factor/cofilin family, which suggested that SNPs resulting in L84P (rs199716082) and L99A (rs267603119) variants represent significant CFL1 mutations associated with disease development.

Biorecognition Engineering Technologies for Cancer Diagnosis: A Systematic Literature Review of Non-Conventional and Plausible Sensor Development Methods

Simple Summary

Approximately 70% of patients with cancer are diagnosed at late stages of the disease in developing countries. This is partly owed to the restricted access to cost-effective and accurate diagnostic tools in healthcare systems. Biosensor diagnostic tools based on conventional antibodies have been a valuable option for creating accessible detection systems for cancer. However, antibodies have certain limitations related to cost, stability, and applicability. The latter promoted the research and development of alternative approaches to generating molecules and molecule-based scaffolds with similar biorecognition properties to antibodies (non-conventional technologies). This review aimed to present and analyze the current trends of three of these emerging non-conventional technologies for biorecognition engineering in cancer diagnostics, named: molecularly imprinted polymers, recombinant antibodies, and antibody mimetic molecules. These non-conventional technologies are promising, relevant, and more accessible alternatives to conventional antibodies in developing cancer biosensors and worthy of being acknowledged by the scientific community, especially for their use in point-of-care cancer diagnostics in developing countries.

Abstract

Cancer is the second cause of mortality worldwide. Early diagnosis of this multifactorial disease is challenging, especially in populations with limited access to healthcare services. A vast repertoire of cancer biomarkers has been studied to facilitate early diagnosis; particularly, the use of antibodies against these biomarkers has been of interest to detect them through biorecognition. However, there are certain limitations to this approach. Emerging biorecognition engineering technologies are alternative methods to generate molecules and molecule-based scaffolds with similar properties to those presented by antibodies. Molecularly imprinted polymers, recombinant antibodies, and antibody mimetic molecules are three novel technologies commonly used in scientific studies. This review aimed to present the fundamentals of these technologies and address questions about how they are implemented for cancer detection in recent scientific studies. A systematic analysis of the scientific peer-reviewed literature regarding the use of these technologies on cancer detection was carried out starting from the year 2000 up to 2021 to answer these questions. In total, 131 scientific articles indexed in the Web of Science from the last three years were included in this analysis. The results showed that antibody mimetic molecules technology was the biorecognition technology with the highest number of reports. The most studied cancer types were: multiple, breast, leukemia, colorectal, and lung. Electrochemical and optical detection methods were the most frequently used. Finally, the most analyzed biomarkers and cancer entities in the studies were carcinoembryonic antigen, MCF-7 cells, and exosomes. These technologies are emerging tools with adequate performance for developing biosensors useful in cancer detection, which can be used to improve cancer diagnosis in developing countries.

The Complex Roles of Adenosine Triphosphate in Bioenergetics

ATP is generally defined as the "energy currency" of the cell. Its phosphoanhydride P-O bonds are often considered to be "high energy" linkages that release free energy when broken, and its hydrolysis is described as "strongly exergonic". However, breaking bonds cannot release energy and ATP hydrolysis in motor and active transport proteins is not "strongly exergonic". So, the relevance of ATP resides elsewhere. As important as the nucleotide are the proteins that undergo functionally relevant conformational changes upon both ATP binding and release of ADP and inorganic phosphate. ATP phosphorylates proteins for signaling, active transport, and substrates in condensation reactions. The ensuing dephosphorylation has different consequences in each case. In signaling and active transport the phosphate group is hydrolyzed whereas in condensation reactions the phosphoryl fragment acts as a dehydrating agent. As it will be discussed in this article, ATP does much more than simply contribute free energy to biological processes.

Characterization of an Aspergillus niger for Efficient Fatty Acid Ethyl Ester Synthesis in Aqueous Phase and the Molecular Mechanism

Fatty acid ethyl esters are important flavor chemicals in strong-flavor baijiu. Microorganisms are the main contributors to ester synthesis during baijiu manufacture. However, the ester synthesis was unstable between batches. This was owing to a limited knowledge of the mechanisms for ester synthesis by microorganisms. In this work, a fatty acid ethyl ester synthesizing Aspergillus niger strain CGMCC (China General Microbiological Culture Collection) 3.4309 was identified. The conversion ratios of ethyl valerate, ethyl caproate, ethyl caprylate, and ethyl caprate were 7.87, 29.20, 94.80, and 85.20%, respectively, under the optimized conditions. A comparison of transcriptomes under the initial and optimized ester synthetic conditions indicated that 23 genes were upregulated in transcription level and encoded enzymes with potential abilities for ester synthesis. Eleven of the enzymes were expressed, and three of them, numbered An605, An1097, and An3131, showed the ability to catalyze fatty acid ethyl ester synthesis under aqueous phase, with capric acid as the preferred substrate. The possible enzymatic catalytic mechanism was proposed based on homology modeling and molecular docking. This study reported for the first time that A. niger showed the ability to efficiently catalyze the synthesis of short- and medium-chain fatty acid ethyl esters in aqueous phase, identified the key enzymes, and analyzed the basic enzymatic properties. This is helpful to promote the application of related microorganisms and enzyme resources in the baijiu industry.

Reliable Prediction of the Protein-Ligand Binding Affinity Using a Charge Penetration Corrected AMOEBA Force Field: A Case Study of Drug Resistance Mutations in Abl Kinase

Protein mutations that directly impair drug binding are related to therapeutic resistance, and accurate prediction of their impact on drug binding would benefit drug design and clinical practice. Here, we have developed a scoring strategy that predicts the effect of the mutations on the protein-ligand binding affinity. In view of the critical importance of electrostatics in protein-ligand interactions, the charge penetration corrected AMOEBA force field (AMOEBA_CP model) was employed to improve the accuracy of the calculated electrostatic energy. We calculated the electrostatic energy using an energy decomposition analysis scheme based on the generalized Kohn-Sham (GKS-EDA). The AMOEBA_CP model was validated by a protein-fragment-ligand complex data set (Abl236) constructed from the co-crystal structures of the cancer target Abl kinase with six inhibitors. To predict ligand binding affinity changes upon protein mutation of Abl kinase, we used sampling protocol with multistep simulated annealing to search conformations of mutant proteins. The scoring strategy based on AMOEBA_CP model has achieved considerable performance in predicting resistance for 8 kinase inhibitors across 144 clinically identified point mutations. Overall, this study illustrates that the AMOEBA_CP model, which accurately treats electrostatics through penetration correction, enables the accurate prediction of the mutation-induced variation of protein-ligand binding affinity.

Cell components, interaction types and functional groups involved in the in vitro binding of bisphenol A by Lactiplantibacillus plantarum RS20D and DL7X

AIMS

The current study aimed to evaluate the capacity of two Lactiplantibacillus plantarum strains to remove Bisphenol A (BPA) and to determine the preliminary removal mechanisms underlying this process.

METHODS AND RESULTS

The BPA removal capacity of L. plantarum RS20D and DL7X was assessed by HPLC analysis. The effect of various treatments (physical, chemical, and enzymatic) on two strains were studied to understand which interaction types worked. The different cellular components of them were also subjected to binding assays. Additionally, Fourier-transform infrared spectroscopy (FTIR) was performed to identify the functional groups related to the BPA binding process. Results show that various treatments enhanced the binding capacity of two strains, the effect of sodium dodecyl sulfate was the most outstanding (P=0.000, P=0.000). Hydrogen bonding and hydrophobic interactions likely occurred. Peptidoglycans showed the highest binding capability, protoplasts and teichoic acids might also exert a binding effect. -OH, C=O, -CH, -NH, C-N, C-O, and P=O participated in BPA binding by the two L. plantarum lines.

CONCLUSIONS

Peptidoglycans, protoplasts, and teichoic acid played a vital role in the binding of BPA.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our results provided a theoretical foundation for developing effective dietary strategies with foodborne L. plantarum to remove food contaminants.

Sharing the salt bowl: Counterion identity drives N-alkyl resorcinarene affinity for pyrophosphate in water

N-Alkyl ammonium resorcinarene chloride receptors, NARX4, have been shown to act as high-sensitivity detectors of pyrophosphate (PPi), a biomarker of disease, in aqueous media through the chloride-to-PPi exchange [NAR(Cl)4 to...

Complementary approaches to obtaining thermodynamic parameters from protein ligand systems-challenges and opportunities

Protein ligand interactions play an important role in biology. Increasingly the aim is to understand and influence protein ligand binding. The binding process is heavily influenced by its thermodynamic parameters. In order to understand how the whole system thermodynamics work it is important to characterise the individual contribution of each of the systems components. While the change in conformational entropy of the protein can be determined using QENS complementary methods are necessary in order to characterise all components. This paper will describe the challenges that can occur when combining the different methods, as well as how they can be overcome.

Chiral Induced Spin Selectivity and Its Implications for Biological Functions

Chirality in life has been preserved throughout evolution. It has been assumed that the main function of chirality is its contribution to structural properties. In the past two decades, however, it has been established that chiral molecules possess unique electronic properties. Electrons that pass through chiral molecules, or even charge displacements within a chiral molecule, do so in a manner that depends on the electron's spin and the molecule's enantiomeric form. This effect, referred to as chiral induced spin selectivity (CISS), has several important implications for the properties of biosystems. Among these implications, CISS facilitates long-range electron transfer, enhances bio-affinities and enantioselectivity, and enables efficient and selective multi-electron redox processes. In this article, we review the CISS effect and some of its manifestations in biological systems. We argue that chirality is preserved so persistently in biology not only because of its structural effect, but also because of its important function in spin polarizing electrons. Expected final online publication date for the Annual Review of Biophysics, Volume 51 is May 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Insight into Carbocation-Induced Noncovalent Interactions in the Methanol-to-Olefins Reaction over ZSM-5 Zeolite by Solid-State NMR Spectroscopy

Carbocations such as cyclic carbenium ions are important intermediates in the zeolite-catalyzed methanol-to-olefins (MTO) reaction. The MTO reaction propagates through a complex hydrocarbon pool process. Understanding the carbocation-involved hydrocarbon pool reaction on a molecular level still remains challenging. Here we show that electron-deficient cyclopentenyl cations stabilized in ZSM-5 zeolite are able to capture the alkanes, methanol, and olefins produced during MTO reaction via noncovalent interactions. Intermolecular spatial proximities/interactions are identified by using two-dimensional ¹³ C-¹³ C correlation solid-state NMR spectroscopy. Combined NMR experiments and theoretical analysis suggests that in addition to the dispersion and CH/π interactions, the multiple functional groups in the cyclopentenyl cations produce strong attractive force via cation-induced dipole, cation-dipole and cation-π interactions. These carbocation-induced noncovalent interactions modulate the product selectivity of hydrocarbon pool reaction.

Evolution of dynamical networks enhances catalysis in a designer enzyme

Activation heat capacity is emerging as a crucial factor in enzyme thermoadaptation, as shown by the non-Arrhenius behaviour of many natural enzymes. However, its physical origin and relationship to the evolution of catalytic activity remain uncertain. Here we show that directed evolution of a computationally designed Kemp eliminase reshapes protein dynamics, which gives rise to an activation heat capacity absent in the original design. These changes buttress transition-state stabilization. Extensive molecular dynamics simulations show that evolution results in the closure of solvent-exposed loops and a better packing of the active site. Remarkably, this gives rise to a correlated dynamical network that involves the transition state and large parts of the protein. This network tightens the transition-state ensemble, which induces a negative activation heat capacity and non-linearity in the activity-temperature dependence. Our results have implications for understanding enzyme evolution and suggest that selectively targeting the conformational dynamics of the transition-state ensemble by design and evolution will expedite the creation of novel enzymes.

Tryptophan, an Amino-Acid Endowed with Unique Properties and Its Many Roles in Membrane Proteins

Tryptophan is an aromatic amino acid with unique physico-chemical properties. It is often encountered in membrane proteins, especially at the level of the water/bilayer interface. It plays a role in membrane protein stabilization, anchoring and orientation in lipid bilayers. It has a hydrophobic character but can also engage in many types of interactions, such as π–cation or hydrogen bonds. In this review, we give an overview of the role of tryptophan in membrane proteins and a more detailed description of the underlying noncovalent interactions it can engage in with membrane partners.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Molecular Tailoring Approach for Estimating Individual Intermolecular Interaction Energies in Benzene Clusters

There is no general method available for the estimation of individual intermolecular interaction energies in weakly bound molecular clusters, and such studies are limited only to the dimer. Recently, we proposed a molecular tailoring approach-based method for the estimation of individual O-H···O hydrogen bond energies in water clusters. In the present work, we extend the applicability of this method for estimating the individual intermolecular interaction energies in benzene clusters, which are expected to be small. The basis set superposition error (BSSE)-corrected individual intermolecular interaction energies in linear (LN) benzene clusters, LN-(Bz)_n n = 3-7, were calculated to be in the range from -1.75 to -2.33 kcal/mol with the cooperativity contribution falling between 0.05 and 0.20 kcal/mol, calculated at the MP2.5/aug-cc-pVDZ level of theory. In the case of non-linear (NLN) benzene clusters, NLN-(Bz)_n n = 3-5, the BSSE-corrected individual intermolecular interaction energies exhibit a wider range from -1.16 to -2.55 kcal/mol with cooperativity contribution in the range from 0.02 to -0.61 kcal/mol. The accuracy of these estimated values was validated by adding the sum of interaction energies to the sum of monomer energies. These estimated molecular energies of clusters were compared with their actual calculated values. The small difference (<0.3 kcal/mol) in these two values suggests that our estimated individual intermolecular interaction energies in benzene clusters are quite reliable.

A higher flexibility at the SARS-CoV-2 main protease active site compared to SARS-CoV and its potentialities for new inhibitor virtual screening targeting multi-conformers

The main-protease (Mpro) catalyzes a crucial step for the SARS-CoV-2 life cycle. The recent SARS-CoV-2 presents the main protease (MCoV2pro) with 12 mutations compared to SARS-CoV (MCoV1pro). Recent studies point out that these subtle differences lead to mobility variances at the active site loops with functional implications. We use metadynamics simulations and a sort of computational analysis to probe the dynamic, pharmacophoric and catalytic environment differences between the monomers of both enzymes. So, we verify how much intrinsic distinctions are preserved in the functional dimer of MCoV2pro, as well as its implications for ligand accessibility and optimized drug screening. We find a significantly higher accessibility to open binding conformers in the MCoV2pro monomer compared to MCoV1pro. A higher hydration propensity for the MCoV2pro S2 loop with the A46S substitution seems to exercise a key role. Quantum calculations suggest that the wider conformations for MCoV2pro are less catalytically active in the monomer. However, the statistics for contacts involving the N-finger suggest higher maintenance of this activity at the dimer. Docking analyses suggest that the ability to vary the active site width can be important to improve the access of the ligand to the active site in different ways. So, we carry out a multiconformational virtual screening with different ligand bases. The results point to the importance of taking into account the protein conformational multiplicity for new promissors anti MCoV2pro ligands. We hope these results will be useful in prospecting, repurposing and/or designing new anti SARS-CoV-2 drugs.Communicated by Ramaswamy H. Sarma.

Activated nanoscale actin-binding domain motion in the catenin-cadherin complex revealed by neutron spin echo spectroscopy

As the core component of the adherens junction in cell-cell adhesion, the cadherin-catenin complex transduces mechanical tension between neighboring cells. Structural studies have shown that the cadherin-catenin complex exists as an ensemble of flexible conformations, with the actin-binding domain (ABD) of α-catenin adopting a variety of configurations. Here, we have determined the nanoscale protein domain dynamics of the cadherin-catenin complex using neutron spin echo spectroscopy (NSE), selective deuteration, and theoretical physics analyses. NSE reveals that, in the cadherin-catenin complex, the motion of the entire ABD becomes activated on nanosecond to submicrosecond timescales. By contrast, in the α-catenin homodimer, only the smaller disordered C-terminal tail of ABD is moving. Molecular dynamics (MD) simulations also show increased mobility of ABD in the cadherin-catenin complex, compared to the α-catenin homodimer. Biased MD simulations further reveal that the applied external forces promote the transition of ABD in the cadherin-catenin complex from an ensemble of diverse conformational states to specific states that resemble the actin-bound structure. The activated motion and an ensemble of flexible configurations of the mechanosensory ABD suggest the formation of an entropic trap in the cadherin-catenin complex, serving as negative allosteric regulation that impedes the complex from binding to actin under zero force. Mechanical tension facilitates the reduction in dynamics and narrows the conformational ensemble of ABD to specific configurations that are well suited to bind F-actin. Our results provide a protein dynamics and entropic explanation for the observed force-sensitive binding behavior of a mechanosensitive protein complex.

Peptide-based inhibitors of protein-protein interactions: biophysical, structural and cellular consequences of introducing a constraint

Protein-protein interactions (PPIs) are implicated in the majority of cellular processes by enabling and regulating the function of individual proteins. Thus, PPIs represent high-value, but challenging targets for therapeutic intervention. The development of constrained peptides represents an emerging strategy to generate peptide-based PPI inhibitors, typically mediated by α-helices. The approach can confer significant benefits including enhanced affinity, stability and cellular penetration and is ingrained in the premise that pre-organization simultaneously pays the entropic cost of binding, prevents a peptide from adopting a protease compliant β-strand conformation and shields the hydrophilic amides from the hydrophobic membrane. This conceptual blueprint for the empirical design of peptide-based PPI inhibitors is an exciting and potentially lucrative way to effect successful PPI inhibitor drug-discovery. However, a plethora of more subtle effects may arise from the introduction of a constraint that include changes to binding dynamics, the mode of recognition and molecular properties. In this review, we summarise the influence of inserting constraints on biophysical, conformational, structural and cellular behaviour across a range of constraining chemistries and targets, to highlight the tremendous success that has been achieved with constrained peptides alongside emerging design opportunities and challenges.

Binding Revisited-Avidity in Cellular Function and Signaling

When characterizing biomolecular interactions, avidity, is an umbrella term used to describe the accumulated strength of multiple specific and unspecific interactions between two or more interaction partners. In contrast to the affinity, which is often sufficient to describe monovalent interactions in solution and where the binding strength can be accurately determined by considering only the relationship between the microscopic association and dissociation rates, the avidity is a phenomenological macroscopic parameter linked to several microscopic events. Avidity also covers potential effects of reduced dimensionality and/or hindered diffusion observed at or near surfaces e.g., at the cell membrane. Avidity is often used to describe the discrepancy or the "extra on top" when cellular interactions display binding that are several orders of magnitude stronger than those estimated in vitro. Here we review the principles and theoretical frameworks governing avidity in biological systems and the methods for predicting and simulating avidity. While the avidity and effects thereof are well-understood for extracellular biomolecular interactions, we present here examples of, and discuss how, avidity and the underlying kinetics influences intracellular signaling processes.

pH-Dependent Conformational Changes Lead to a Highly Shifted pKa for a Buried Glutamic Acid Mutant of SNase

Ionizable residues are rarely present in the hydrophobic interior of proteins, but when they are, they play important roles in biological processes such as energy transduction and enzyme catalysis. Internal ionizable residues have anomalous experimental pK_a values with respect to their pK_a in bulk water. This work investigates the atomistic cause of the highly shifted pK_a of the internal Glu23 in the artificially mutated variant V23E of Staphylococcal Nuclease (SNase) using pH replica exchange molecular dynamics (pH-REMD) simulations. The pK_a of Glu23 obtained from our calculations is 6.55, which is elevated with respect to the glutamate pK_a of 4.40 in bulk water. The calculated value is close to the experimental pK_a of 7.10. Our simulations show that the highly shifted pK_a of Glu23 is the product of a pH-dependent conformational change, which has been observed experimentally and also seen in our simulations. We carry out an analysis of this pH-dependent conformational change in response to the protonation state change of Glu23. Using a four-state thermodynamic model, we estimate the two conformation-specific pK_a values of Glu23 and describe the coupling between the conformational and ionization equilibria.

Discovery of highly selective and orally available benzimidazole-based phosphodiesterase 10 inhibitors with improved solubility and pharmacokinetic properties for treatment of pulmonary arterial hypertension

Optimization efforts were devoted to discover novel PDE10A inhibitors in order to improve solubility and pharmacokinetics properties for a long-term therapy against pulmonary arterial hypertension (PAH) starting from the previously synthesized inhibitor A. As a result, a potent and highly selective PDE10A inhibitor, 14·3HCl (half maximal inhibitory concentration, IC₅₀ = 2.8 nmol/L and >3500-fold selectivity) exhibiting desirable solubility and metabolic stability with a remarkable bioavailability of 50% was identified with the aid of efficient methods of binding free energy predictions. Animal PAH studies showed that the improvement offered by 14·3HCl [2.5 mg/kg, oral administration (p.o.)] was comparable to tadalafil (5.0 mg/kg, p.o.), verifying the feasibility of PDE10A inhibitors for the anti-PAH treatment. The crystal structure of the PDE10A−14 complex illustrates their binding pattern, which provided a guideline for rational design of highly selective PDE10A inhibitors.