CO Oxidation as a Prototypical Reaction for Heterogeneous Processes

Mie Resonant Metal Oxide Nanospheres for Broadband Photocatalytic Enhancements

Metal oxides are widely used in heterogeneous catalysis as supports to disperse catalytically active nanoparticles, isolated atomic sites, or even as catalysts themselves. Herein, we present a method to produce optically active metal oxide supports that exhibit size-dependent Mie resonances based on TiO2 nanospheres with tunable size, crystalline phase composition, and optical properties. Mie resonant TiO2 nanospheres were used as supports to disperse Au, Pt, and Pd nanoparticles. We have found up to a 50-fold enhancement of the electric field at the metal oxide/metal interface corresponding to wavelength-dependent multipolar resonances in the TiO2 structure. Using Au/TiO2 as a prototypical photocatalyst, we demonstrate broadband rate enhancements between 400 and 800 nm during CO oxidation, with a noticeable increase below 500 nm. This increased reactivity at higher photon energies is due to improved photon utilization and interband absorption in the gold that results in greater secondary electron generation through electron-electron scattering processes, thus leading to higher rates in conjunction with the Mie scattering TiO2 support. This study not only highlights the potential of Mie resonant TiO2 in broadband photocatalytic enhancements but also for developing various Mie resonant metal oxide supports, such as ZnO or Cu2O, which can improve photocatalytic performance for a number of critical reactions. As the chemical and energy industries move toward conversion technologies driven by renewable energy sources, the strategy of designing optical resonances into oxide supports that are already widely used could enable a straightforward adaptation of photochemical processing based on traditional heterogeneous catalysts.

Observation of the Transition from Triple Bonds to Single Bonds between Ru-Ge Bonding in RuGeO(CO)n- (n = 3-5)

This work reports the observation and characterization of heterobinuclear transition-metal main-group metal oxide carbonyl complex anions, RuGeO(CO)n- (n = 3-5), by combining mass-selected photoelectron velocity map imaging spectroscopy and quantum chemistry calculations. The experimentally determined vertical electron detachment energy of RuGeO(CO)3- surpasses those of RuGeO(CO)4- and RuGeO(CO)5-, which is attributed to distinctive bonding features. RuGeO(CO)3- manifests one covalent σ and two Ru-to-Ge dative π bonds, contrasting with the sole covalent σ bond present in RuGeO(CO)4- and RuGeO(CO)5-. Unpaired spin density distribution analysis reveals a 17-electron configuration at the Ru center in RuGeO(CO)3- and an 18-electron configuration in RuGeO(CO)4- and RuGeO(CO)5-. This work closes a gap in the quantitative physicochemical characterization of heteronuclear oxide carbonyl complexes, enhancing our insights into catalytic processes of CO/GeO on the metal surface at the molecular level.

Integration of conventional surface science techniques with surface-sensitive azimuthal and polarization dependent femtosecond-resolved sum frequency generation spectroscopy

Experimental insight into the elementary processes underlying charge transfer across interfaces has blossomed with the wide-spread availability of ultra-high vacuum (UHV) setups that allow the preparation and characterization of solid surfaces with well-defined molecular adsorbates over a wide range of temperatures. Within the last 15 years, such insights have extended to charge transfer heterostructures containing solids overlain by one or more atomically thin two dimensional materials. Such systems are of wide potential interest both because they appear to offer a path to separate surface reactivity from bulk chemical properties and because some offer completely novel physics, unrealizable in bulk three dimensional solids. Thick layers of molecular adsorbates or heterostructures of 2D materials generally preclude the use of electrons or atoms as probes. However, with linear photon-in/photon-out techniques, it is often challenging to assign the observed optical response to a particular portion of the interface. We and prior workers have demonstrated that by full characterization of the symmetry of the second order nonlinear optical susceptibility, i.e., the χ(2), in sum frequency generation (SFG) spectroscopy, this problem can be overcome. Here, we describe an UHV system built to allow conventional UHV sample preparation and characterization, femtosecond and polarization resolved SFG spectroscopy, the azimuthal sample rotation necessary to fully describe χ(2) symmetry, and sufficient stability to allow scanning SFG microscopy. We demonstrate these capabilities in proof-of-principle measurements on CO adsorbed on Pt(111) and on the clean Ag(111) surface. Because this setup allows both full characterization of the nonlinear susceptibility and the temperature control and sample preparation/characterization of conventional UHV setups, we expect it to be of great utility in the investigation of both the basic physics and applications of solid, 2D material heterostructures.

A molecular beam study of CO oxidation on Pd clusters supported on alumina: the effect of cluster size

The activity in CO oxidation of regular arrays of Pd clusters, in the size range of 5-180 atoms, supported on alumina has been studied by using a molecular beam method. The Pd clusters are grown on a nanostructured ultrathin alumina film on Ni3Al(111) providing a hexagonal array of clusters with a narrow size distribution. The steady state turnover frequency (TOF) is measured as a function of the mean cluster size. On average the TOF increases with size. Below about 20 atoms, the TOF increases rapidly and for larger clusters it grows slowly and reaches a value close to those obtained on bulk single crystals at 180 atoms. The size effect is explained by the smaller activity of Pd atoms in contact with the alumina support.

Bond Selective Photochemistry at Metal Nanoparticle Surfaces: CO Desorption from Pt and Pd

The use of visible photon fluxes to influence catalytic reactions on metal nanoparticle surfaces has attracted attention based on observations of reaction mechanisms and selectivity not observed under equilibrium heating. These observations suggest that photon fluxes can selectively impact the rates of certain elementary steps, creating nonequilibrium energy distributions among various reaction pathways. However, quantitative studies validating these hypotheses on metal nanoparticle surfaces are lacking. We examine the influence of continuous wave visible photon fluxes on the CO desorption rates from 1 to 2 nm diameter Pt and Pd nanoparticle surfaces supported on γ-Al2O3. Temperature-programmed desorption measurements quantified via diffuse reflectance infrared Fourier transform spectroscopy demonstrate that visible photon fluxes significantly enhanced the rate of CO desorption from Pt nanoparticles in a wavelength-dependent manner. 440 nm photons most efficiently promoted CO desorption from Pt nanoparticle surfaces, aligning with the excitation energy for the interfacial electronic transition within the Pt-CO bond. Conversely, visible photon fluxes had no measurable influence on CO desorption rates from Pd nanoparticle surfaces after accounting for photon-induced heating. Density functional theory calculations demonstrate that the Pt-CO bond exhibits a narrower LUMO resonance, stronger coupling between the photoexcitation and forces induced on the metal-C bond, and vibrational energy dissipation that more effectively couples to desorption as compared to Pd-CO. These results demonstrate the specificity photons provide in facilitating chemical reactions on metal nanoparticle surfaces and substantiate the idea that photon fluxes can steer processes and outcomes of catalytic reactions in ways not achievable by equilibrium heating.

Hydrogen Spillover Induced PtCo/CoOx Interfaces with Enhanced Catalytic Activity for CO Oxidation at Low Temperatures in Humid Conditions

The development of catalysts with abundant active interfaces for superior low-temperature catalytic CO oxidation is critical to meet increasingly rigorous emission requirements, yet still challenging. Herein, this work reports a PtCo/CoOx/Al2O3 catalyst with PtCo clusters and enriched Pt─O─Co interfaces induced by hydrogen spillover from the Pt sites and self-oxidation process in air, exhibiting excellent performance for CO oxidation at low temperatures and humid conditions. The combination of structural characterizations and in situ Fourier transform infrared spectroscopy reveals that the PtCo cluster effectively prevents CO saturation/poisoning on the Pt surface. Additionally, the presence of Pt─O─Co interfaces in the PtCo/CoOx/Al2O3 catalyst provides a significant number of active sites for oxygen activation and ─OH formation. This facilitates efficient generation of CO2 at ambient temperature by coupling with nearby adsorbed CO molecules, resulting in superior low-temperature activity and long-term stability for CO oxidation under humid conditions. This work provides a facile route toward rationalizing the design of catalysts with more active interfaces for superior low-temperature CO oxidation under humid conditions for practical applications.

CO and O2 Interaction with Kinked Pt Surfaces

We investigate the chemical interaction of carbon monoxide (CO) and oxygen (O2) with kink atoms on steps of platinum crystal surfaces using a specially designed Pt curved sample. We aim at describing the fundamental stages of the CO oxidation reaction, i.e., CO-covered/poisoned stage and O-covered/active stage, at the poorly known kinked Pt facets by probing CO uptake/saturation and O2 saturation, respectively. Based on the systematic analysis that the curved surface allows, and using high-resolution X-ray photoemission, a diversity of terrace and step/kink species are straightforwardly identified and accurately quantified, defining a smooth structural and chemical variation across different crystal planes. In the CO-saturated case, we observe a preferential adsorption at step edges, where the CO coverage reaches a CO molecule per step Pt atom, significantly higher than their close-packed analogous steps with straight terrace termination. For the O-saturated surface, a significantly higher O coverage is observed in kinked planes compared to the Pt(111) surface. While the strong adsorption of CO at the kinked edges points toward a higher ignition temperature of the CO oxidation at kinks as compared to terraces, the large O coverage at steps may lead to an increased reactivity of kinked surfaces during the active stage of the CO oxidation.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Interrogating site dependent kinetics over SiO2-supported Pt nanoparticles

A detailed knowledge of reaction kinetics is key to the development of new more efficient heterogeneous catalytic processes. However, the ability to resolve site dependent kinetics has been largely limited to surface science experiments on model systems. Herein, we can bypass the pressure, materials, and temperature gaps, resolving and quantifying two distinct pathways for CO oxidation over SiO2-supported 2 nm Pt nanoparticles using transient pressure pulse experiments. We find that the pathway distribution directly correlates with the distribution of well-coordinated (e.g., terrace) and under-coordinated (e.g., edge, vertex) CO adsorption sites on the 2 nm Pt nanoparticles as measured by in situ DRIFTS. We conclude that well-coordinated sites follow classic Langmuir-Hinshelwood kinetics, but under-coordinated sites follow non-standard kinetics with CO oxidation being barrierless but conversely also slow. This fundamental method of kinetic site deconvolution is broadly applicable to other catalytic systems, affording bridging of the complexity gap in heterogeneous catalysis.

The confined surface C2N/Pt(111) as a highly efficient catalyst for CO oxidation

The problem of poisoning on the surface of catalysts used in CO oxidation reactions, such as Pt, needs to be solved. In this work, we constructed lattice-matched C2N/Pt(111) catalysts with different configurations (top/fcc/hcp) and found that, within the confined space between the cover and the substrate, the adsorption energy of CO is reduced by 0.35 eV to 0.43 eV, while the adsorption of other reactants O/O2 is strengthened and the adsorption energy of the product CO2 is positive, indicating that the constraint effect produced by C2N and Pt(111) is beneficial to CO oxidation, when compared to the pure Pt(111). Our work suggests that the C2N cover not only protects the Pt surface under harsh conditions but also allows gaseous molecules CO and O2 to approach the Pt surface through a facile intercalation process, with enhanced surface reactivity for CO oxidation and reduced catalyst poisoning.

Materials Genes of CO2 Hydrogenation on Supported Cobalt Catalysts: An Artificial Intelligence Approach Integrating Theoretical and Experimental Data

Designing materials for catalysis is challenging because the performance is governed by an intricate interplay of various multiscale phenomena, such as the chemical reactions on surfaces and the materials' restructuring during the catalytic process. In the case of supported catalysts, the role of the support material can be also crucial. Here, we address this intricacy challenge by a symbolic-regression artificial intelligence (AI) approach. We identify the key physicochemical parameters correlated with the measured performance, out of many offered candidate parameters characterizing the materials, reaction environment, and possibly relevant underlying phenomena. Importantly, these parameters are obtained by both experiments and ab initio simulations. The identified key parameters might be called "materials genes", in analogy to genes in biology: they correlate with the property or function of interest, but the explicit physical relationship is not (necessarily) known. To demonstrate the approach, we investigate the CO2 hydrogenation catalyzed by cobalt nanoparticles supported on silica. Crucially, the silica support is modified with the additive metals magnesium, calcium, titanium, aluminum, or zirconium, which results in six materials with significantly different performances. These systems mimic hydrothermal vents, which might have produced the first organic molecules on Earth. The key parameters correlated with the CH3OH selectivity reflect the reducibility of cobalt species, the adsorption strength of reaction intermediates, and the chemical nature of the additive metal. By using an AI model trained on basic elemental properties of the additive metals (e.g., ionization potential) as physicochemical parameters, new additives are suggested. The predicted CH3OH selectivity of cobalt catalysts supported on silica modified with vanadium and zinc is confirmed by new experiments.

Reactant-Induced Structural Evolution of Pt Catalysts Confined in Zeolite

Reactant-induced structural evolutions of heterogeneous metal catalysts are frequently observed in numerous catalytic systems, which can be associated with the formation or deactivation of active sites. In this work, we will show the structural transformation of subnanometer Pt clusters in pure-silica MFI zeolite structure in the presence of CO, O2, and/or H2O and the catalytic consequences of the Pt-zeolite materials derived from various treatment conditions. By applying the appropriate pretreatment under a reactant atmosphere, we can precisely modulate the size distribution of Pt species spanning from single Pt atoms to small Pt nanoparticles (1-5 nm) in the zeolite matrix, resulting in the desirably active and stable Pt species for CO oxidation. We also show the incorporation of Fe into the zeolite framework greatly promotes the stability of Pt species against undesired sintering under harsh conditions (up to 650 °C in the presence of CO, O2, and moisture).

Role of H2O in Catalytic Conversion of C1 Molecules

Due to their role in controlling global climate change, the selective conversion of C1 molecules such as CH4, CO, and CO2 has attracted widespread attention. Typically, H2O competes with the reactant molecules to adsorb on the active sites and therefore inhibits the reaction or causes catalyst deactivation. However, H2O can also participate in the catalytic conversion of C1 molecules as a reactant or a promoter. Herein, we provide a perspective on recent progress in the mechanistic studies of H2O-mediated conversion of C1 molecules. We aim to provide an in-depth and systematic understanding of H2O as a promoter, a proton-transfer agent, an oxidant, a direct source of hydrogen or oxygen, and its influence on the catalytic activity, selectivity, and stability. We also summarize strategies for modifying catalysts or catalytic microenvironments by chemical or physical means to optimize the positive effects and minimize the negative effects of H2O on the reactions of C1 molecules. Finally, we discuss challenges and opportunities in catalyst design, characterization techniques, and theoretical modeling of the H2O-mediated catalytic conversion of C1 molecules.

CO Oxidation Promoted by NO Adsorption on RhMn2O3- Cluster Anions

CO oxidation represents an important model reaction in the gas phase to provide a clear structure-reactivity relationship in related heterogeneous catalysis. Herein, in combination with mass spectrometry experiments and quantum-chemical calculations, we identified that the RhMn2O3- cluster cannot oxidize CO into gas-phase CO2 at room temperature, while the NO preadsorbed products RhMn2O3-[(NO)1,2] are highly reactive in CO oxidation. This discovery is helpful to get a fundamental understanding on the reaction behavior in real-world three-way catalytic conditions where different kinds of reactants coexist. Theoretical calculations were performed to rationalize the crucial roles of preadsorbed NO where the strongly attached NO on the Rh atom can greatly stabilize the products RhMn2O2-[(NO)1,2] during CO oxidation and at the same time works together with the Rh atom to store electrons that stay originally in the attached CO2- unit. The leading result is that the desorption of CO2, which is the rate-determining step of CO oxidation by RhMn2O3-, can be greatly facilitated on the reactions of RhMn2O3-[(NO)1,2] with CO.

Boosting the catalytic performance of Al2O3-supported Pd catalysts by introducing CeO2 promoters

Maintaining the stability of noble metals is the key to the long-term stability of supported catalysts. In response to the instability of noble metal species at high temperatures, we developed a synergistic strategy of dual oxide supports. By designing and constructing ceria components with small sizes, we have achieved unity in the ability of catalytic materials to supply oxygen and stabilize metal species. In this study, we prepared Al2O3-CeO2-Pd (AlCePd) catalysts containing trace amounts of Ce through the hydrolysis of cerium acetate, which achieved 100% CO conversion at 160 °C. More importantly, the activity remained at its initial 100% in the long-term durability testing, demonstrating the high stability of AlCePd. In contrast, the CO conversion of the CeO2-Pd (CePd) catalyst decreased from 100% to 54% within 3 h. Through comprehensive studies, we found that this excellent catalytic performance stems from the stabilizing effect of an alumina support and the possible reverse oxygen spillover effect of small-sized ceria components, where small-sized ceria components provide active oxygen for independent Pd species, making it possible for the CO adsorbed on Pd to react with this oxygen species.

Operando Electron Microscopy of Catalysts: The Missing Cornerstone in Heterogeneous Catalysis Research?

Heterogeneous catalysis in thermal gas-phase and electrochemical liquid-phase chemical conversion plays an important role in our modern energy landscape. However, many of the structural features that drive efficient chemical energy conversion are still unknown. These features are, in general, highly distinct on the local scale and lack translational symmetry, and thus, they are difficult to capture without the required spatial and temporal resolution. Correlating these structures to their function will, conversely, allow us to disentangle irrelevant and relevant features, explore the entanglement of different local structures, and provide us with the necessary understanding to tailor novel catalyst systems with improved productivity. This critical review provides a summary of the still immature field of operando electron microscopy for thermal gas-phase and electrochemical liquid-phase reactions. It focuses on the complexity of investigating catalytic reactions and catalysts, progress in the field, and analysis. The forthcoming advances are discussed in view of correlative techniques, artificial intelligence in analysis, and novel reactor designs.

Catalysts Prepared from Atomically Dispersed Ce(III) on MgO Rival Bulk Ceria for CO Oxidation

Atomically dispersed cerium catalysts on an inert, crystalline MgO powder support were prepared by using both Ce(III) and Ce(IV) precursors. The materials were used as catalysts for CO oxidation in a once-through flow reactor and characterized by atomic-resolution scanning transmission electron microscopy, X-ray absorption near-edge structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction, among other techniques, before and after catalysis. The most active catalysts, formed from the precursor incorporating Ce(III), displayed performance similar to that reported for bulk ceria under comparable conditions. The catalyst provided stable time-on-stream performance for as long as it was kept on-stream, 2 days, increasing slightly in activity as the atomically dispersed cerium ions were transformed into ceria nanodomains represented as CeOx and having increased reducibility on the MgO support. The results suggest how highly dispersed supported ceria catalysts with low cerium loadings can be prepared and may pave the way for improved efficiencies of cerium utilization in oxidation catalysis.

Spectroscopic characterization of heteronuclear iron-chromium carbonyl cluster anions

Infrared photodissociation spectroscopy has been used to investigate CrFe(CO)n- (n = 4-9) clusters in the gas phase. Comparison of the observed spectra in the carbonyl stretching frequency region with those predicted for low-lying isomers by DFT calculations showed that the observed CrFe(CO)n- (n = 4-8) clusters could be characterized to have Cr-Fe bonded (OC)4Fe-Cr(CO)n-4 structures. The coexistence of isomers with the (OC)Fe-Cr(CO)5 and (OC)3Fe-Cr(CO)4 structures was also observed for CrFe(CO)6- and CrFe(CO)7- anions, respectively. The CrFe(CO)n- (n = 4-8) complexes were strongly bonded systems. The CrFe(CO)8- complex was a coordination-saturated cluster, and the CrFe(CO)9- anion was characterized to contain a CrFe(CO)8- core tagged by one CO molecule. Bonding analysis revealed that the Cr-Fe bonds in the CrFe(CO)n- (n = 4-8) clusters were predominantly σ-type single bonds. The iron center in the Fe(CO)4 moiety and the chromium center in the Cr(CO)5 moiety fulfilled the 18-electron configuration for the CrFe(CO)n- (n = 4-6) clusters. As in the CrFe(CO)n- (n = 7, 8) complexes, the iron center in the Fe(CO)4 moiety exhibited a 17-electron configuration, while the chromium center in the Cr(CO)4 moiety exhibited a 16-electron configuration. These findings provide valuable insights into the structure and bonding mechanism of heterometallic carbonyl clusters.

High or Low Coordination: Insight into the Active Site of Pt Nanoparticles toward CO Oxidation

The catalytic activity of metal nanoparticles (NPs) is highly dependent on the coordination environment of the surface sites. Understanding the role of different sites in reactions is essential for gaining insights into catalytic activity and the precise design of catalysts. Herein, we used first-principles calculation-based kinetic Monte Carlo simulations to investigate correlations between different sites on Pt NPs in CO oxidation reactions. Low-coordinated (LC) sites favor the CO adsorption and reaction, whereas the oxygen mainly adsorbs on high-coordinated (HC) sites and diffuses to LC sites for reaction at low temperatures. Compared with step-dominated and terrace-dominated structures, the step-terrace structures exhibit higher activities. This reveals that the catalytic performance is not simply determined by the sites where the reaction occurs but is dramatically affected by the kinetic synergies between different sites. A proper way to optimize the activity of Pt catalysts is to balance the LC and HC sites.

A Review of Mn-Based Catalysts for Abating NOx and CO in Low-Temperature Flue Gas: Performance and Mechanisms

Mn-based catalysts have attracted significant attention in the field of catalytic research, particularly in NOx catalytic reductions and CO catalytic oxidation, owing to their good catalytic activity at low temperatures. In this review, we summarize the recent progress of Mn-based catalysts for the removal of NOx and CO. The effects of crystallinity, valence states, morphology, and active component dispersion on the catalytic performance of Mn-based catalysts are thoroughly reviewed. This review delves into the reaction mechanisms of Mn-based catalysts for NOx reduction, CO oxidation, and the simultaneous removal of NOx and CO. Finally, according to the catalytic performance of Mn-based catalysts and the challenges faced, a possible perspective and direction for Mn-based catalysts for abating NOx and CO is proposed. And we expect that this review can serve as a reference for the catalytic treatment of NOx and CO in future studies and applications.

Phase Segregation in PdCu Alloy Nanoparticles During CO Oxidation Reaction at Atmospheric Pressure

Bimetallic nanoparticle (NP) catalysts are widely used in many heterogeneous gas-based reactions because they often outperform their monometallic counterparts. During these reactions, NPs often undergo structural changes, which impact their catalytic activity. Despite the important role of the structure in the catalytic activity, many aspects of how a reactive gaseous environment affects the structure of bimetallic nanocatalysts are still lacking. Here, using gas-cell transmission electron microscopy (TEM), it is shown that during a CO oxidation reaction over PdCu alloy NPs, the selective oxidation of Cu causes the segregation of Cu and transforms the NPs into Pd-CuO NPs. The segregated NPs are very stable and have high activity for the conversion of CO into CO2 . Based on the observations, the segregation of Cu from Cu-based alloys during a redox reaction is likely to be general and may have a positive impact on the catalytic activity. Hence, it is believed that similar insights based on direct observation of the reactions under relevant reactive conditions are critical both for understanding and designing high-performance catalysts.

Nb2S2C Monolayers with Transition Metal Atoms Embedded at the S Vacancy Are Promising Single-Atom Catalysts for CO Oxidation

Single atoms anchored on stable and robust two-dimensional (2D) materials are attractive catalysts for carbon monoxide (CO) oxidation. Here, 3d (Fe-Zn), 4d (Ru-Cd), and 5d (Os-Hg) transition metal-decorated Nb2S2C monolayers were systematically studied as potential single-atom catalysts for low-temperature CO oxidation reactions by performing first-principles calculations. Sulfur vacancies are essential for stabilizing the transition metals anchored on the surface of defective Nb2S2C. After estimating the structure stability, the aggregation trend of the embedded metal atoms, and adsorption strength of reactants and products, Zn-decorated defective Nb2S2C is predicted to be a promising catalyst to facilitate CO oxidation through the Langmuir-Hinshelwood (LH) mechanism with an energy barrier of only 0.25 eV. Our investigation indicates that defective carbosulfides can be promising substrates to generate efficient and low-cost single-atom catalysts for low-temperature CO oxidation.

Surface Lattice-Embedded Pt Single-Atom Catalyst on Ceria-Zirconia with Superior Catalytic Performance for Propane Oxidation

Tuning the metal-support interaction and coordination environment of single-atom catalysts can help achieve satisfactory catalytic performance for targeted reactions. Herein, via the facile control of calcination temperatures for Pt catalysts on pre-stabilized Ce0.9Zr0.1O2 (CZO) support, Pt single atoms (Pt1) with different strengths of Pt-CeO2 interaction and coordination environment were successfully constructed. With the increase in calcination temperature from 350 to 750 °C, a stronger Pt-CeO2 interaction and higher Pt-O-Ce coordination number were achieved due to the reaction between PtOx and surface Ce3+ species as well as the migration of Pt1 into the surface lattice of CZO. The Pt/CZO catalyst calcined at 750 °C (Pt/CZO-750) exhibited a surprisingly higher C3H8 oxidation activity than that calcined at 550 °C (Pt/CZO-550). Through systematic characterizations and reaction mechanism study, it was revealed that the higher concentration of surface Ce3+ species/oxygen vacancies and the stronger Pt-CeO2 interaction on Pt/CZO-750 could better facilitate the activation of oxygen to oxidize C3H8 into reactive carbonate/carboxyl species and further promote the transformation of these intermediates into gaseous CO2. The Pt/CZO-750 catalyst can be a potential candidate for the catalytic removal of hydrocarbons from vehicle exhaust.

Activating lattice oxygen of single-layer ZnO for the catalytic oxidation reaction

Tuning an oxide/metal interface is of critical importance for the performance enhancement of many heterogeneous catalytic reactions. However, catalytic oxidation occurring at the interface between non-reducible oxide and metal has been challenging, since non-reducible oxides hardly lose their lattice oxygen (O_L) or dissociate O₂ from the gas phase. In this work, a ZnO monolayer film on Au(111) is used as an inverse catalyst to investigate CO oxidation occurring at the ZnO/Au(111) interface via high pressure scanning tunneling microscopy. Surface science experiments indicate that oxygen intercalation under the ZnO monolayer film, termed ZnO/O/Au(111), can be achieved via a surface reaction with 1 × 10^-6 mbar O₃. Subsequent exposure of the formed ZnO/O/Au(111) surface to mbar CO at room temperature leads to the recovery of the pristine ZnO/Au(111) surface. Theoretical calculations reveal that O_L adjacent to intercalated oxygen (O_int) is activated due to the O_L-Zn-O_int bonding and surface corrugation, which can be directly involved in CO oxidation. Subsequently, O_int migrates to the formed oxygen vacancy from the subsurface resuming the pristine ZnO structure. These results thus reveal that oxygen intercalation underneath single-layer ZnO will strongly boost the oxidation reaction via activating adjacent lattice oxygen atoms.

High-Temperature Behavior of Laser Electrodispersion-Prepared Pd/ZSM-5 Hydrocarbon Traps under CO Oxidation Conditions

Zeolites and metal-doped zeolites are now widely considered as low-temperature hydrocarbon traps to be a part of emission control systems in automobiles. However, due to the high temperature of exhaust gases, the thermal stability of such sorbent materials is of great concern. To avoid the thermal instability problem, in the present work, laser electrodispersion was used to deposit Pd particles on the surface of ZSM-5 zeolite grains (SiO₂/Al₂O₃ = 55 and SiO₂/Al₂O₃ = 30) to obtain Pd/ZSM-5 materials with a Pd loading as low as 0.03 wt.%. The thermal stability was evaluated in a prompt thermal aging regime involving thermal treatment at temperatures up to 1000 °C in a real reaction mixture (CO, hydrocarbons, NO, an excess of O₂, and balance N₂) and a model mixture of the same composition with the exception of hydrocarbons. Low-temperature nitrogen adsorption and X-ray diffraction analysis were used to examine the stability of the zeolite framework. Special attention was paid to the state of Pd after thermal aging at varied temperatures. By means of transmission electron microscopy, X-ray photoelectron spectroscopy, and diffuse reflectance UV-Vis spectroscopy, it was shown that palladium, having been initially located on the surface of zeolite, undergoes oxidation and migrates into the zeolite's channels. This enhances the trapping of hydrocarbons and their subsequent oxidation at lower temperatures.

Dynamic evolution of the active center driven by hemilabile coordination in Cu/CeO2 single-atom catalyst

Hemilability is an important concept in homogeneous catalysis where both the reactant activation and the product formation can occur simultaneously through a reversible opening and closing of the metal-ligand coordination sphere. However, this effect has rarely been discussed in heterogeneous catalysis. Here, by employing a theoretical study on CO oxidation over substituted Cu₁/CeO₂ single atom catalysts, we show that dynamic evolution of metal-support coordination can significantly change the electronic structure of the active center. The evolution of the active center is shown to either strengthen or weaken the metal-adsorbate bonding as the reaction proceeds from reactants, through intermediates, to products. As a result, the activity of the catalyst can be increased. We explain our observations by extending hemilability effects to single atom heterogenous catalysts and anticipate that introducing this concept can offer a new insight into the important role active site dynamics have in catalysis toward the rational design of more sophisticated single atom catalyst materials.

Studies on High-Temperature Evolution of Low-Loaded Pd Three-Way Catalysts Prepared by Laser Electrodispersion

Pd/Al₂O₃ catalyst of the "crust" type with Pd loading of 0.03 wt.% was prepared by the deposition of 2 nm Pd particles on the outer surface of the alumina support using laser electrodispersion (LED). This technique differs from a standard laser ablation into a liquid in that the formation of monodisperse nanoparticles occurs in the laser torch plasma in a vacuum. As is found, the LED-prepared catalyst surpasses Pd-containing three-way catalysts, obtained by conventional chemical synthesis, in activity and stability in CO oxidation under prompt thermal aging conditions. Thus, the LED-prepared Pd/Al₂O₃ catalyst showed the best thermal stability up to 1000 °C. The present research is focused on the study of the high-temperature evolution of the Pd/Al₂O₃ catalyst in two reaction mixtures by a set of physicochemical methods (transmission electron microscopy, X-ray photoelectron spectroscopy, and diffuse reflectance UV-vis spectroscopy). In order to follow the dispersion of the Pd nanoparticles during the thermal aging procedure, the testing reaction of ethane hydrogenolysis was also applied. The possible reasons for the high stability of LED-prepared catalysts are suggested.

Promotion Effect of Well-Defined Deposited Water Layer on Carbon Monoxide Oxidation Catalyzed by Single-Atom Alloys

Single-atom alloys (SAAs) exhibit excellent catalytic performance and unique electronic structures, emerging as promising catalysts for potential industrial reactions. While most of them have been widely employed under reducing conditions, few are applied in oxidation reactions. Herein, using density functional theory calculations and microkinetic simulations, we demonstrate that a well-defined one water layer can improve CO oxidation on model SAAs, with reaction rates increased by orders of magnitude. It is found that the formation of hydrogen bonds and the transfer of charges effectively enhance the adsorption and activation of oxygen molecules at the H₂O/SAA interfaces, which not only increases the surface coverage of O₂ species but also reduces the energy barrier of CO oxidation. The proposed strategy in this work would extend the application range of SAA catalysts to oxidation reactions.

Advanced hematite nanomaterials for newly emerging applications

Because of the combined merits of rich physicochemical properties, abundance, low toxicity, etc., hematite (α-Fe2O3), one of the most chemically stable compounds based on the transition metal element iron, is endowed with multifunctionalities and has steadily been a research hotspot for decades. Very recently, advanced α-Fe2O3 materials have also been developed for applications in some cutting-edge fields. To reflect this trend, the latest progress in developing α-Fe2O3 materials for newly emerging applications is reviewed with a particular focus on the relationship between composition/nanostructure-induced electronic structure modulation and practical performance. Moreover, perspectives on the critical challenges as well as opportunities for future development of diverse functionalities are also discussed. We believe that this timely review will not only stimulate further increasing interest in α-Fe2O3 materials but also provide a profound understanding and insight into the rational design of other materials based on transition metal elements for various applications.

Multiple Interface Coupling in Ultrathin Mn-based Composites for Superior Catalytic Oxidation: Implications of Interface Coupling on Structural Defects

Manganese oxide has been recognized as one of the most promising gaseous heterogeneous catalysts due to its low cost, environmental friendliness, and high catalytic oxidation performance. The modulation of the interfacial coupling effect of manganese oxides by chemical means is considered a critical and effective way to improve the catalytic performance. Herein, a novel one-step synthetic strategy of highly-efficient ultrathin manganese-based catalysts is proposed through optimal regulation of metal/manganese oxide multi-interfacial coupling. Carbon monoxide (CO) and propane (C₃H₈) oxidation are employed as probe reactions to investigate the structure-catalytic mechanism - catalytic performance relationship. The ultrathin manganese (Mn)-based catalyst exhibits superior low-temperature catalytic activity with a 90% conversion of CO/C₃H₈ realized at 106℃ and 350℃. Subsequently, the effect of "interfacial effect" on the intrinsic properties of manganese oxides is revealed. The ultrathin appearance of two-dimensional (2D) manganese dioxide (MnO₂) nanosheets changes the binding force in the vertical direction, thus resulting in an increase in the average manganese-oxygen (Mn-O) bond length and exposing more surface defects. Besides, the introduction of Copper (Cu) species into the catalyst further weakens the Mn-O bond and promotes the generation of oxygen vacancies, which subsequently enhances the oxygen migration rate. This study provides new insights into the optimal design of transition metal oxide interfacial assemblies for efficient catalytic reactions.

Operando CO Infrared Spectroscopy and On-Line Mass Spectrometry for Studying the Active Phase of IrO2 in the Catalytic CO Oxidation Reaction

We combine operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) with on-line mass spectrometry (MS) to study the correlation between the oxidation state of titania-supported IrO2 catalysts (IrO2@TiO2) and their catalytic activity in the prototypical CO oxidation reaction. Here, the stretching vibration of adsorbed COad serves as the probe. DRIFTS provides information on both surface and gas phase species. Partially reduced IrO2 is shown to be significantly more active than its fully oxidized counterpart, with onset and full conversion temperatures being about 50 °C lower for reduced IrO2. By operando DRIFTS, this increase in activity is traced to a partially reduced state of the catalysts, as evidenced by a broad IR band of adsorbed CO reaching from 2080 to 1800 cm−1.

Rhodium Catalyst Structural Changes during, and Their Impacts on the Kinetics of, CO Oxidation

Catalysts can undergo structural changes during the reaction, affecting the number and/or the shape of active sites. For example, Rh can undergo interconversion between nanoparticles and single atoms when CO is present in the reaction mixture. Therefore, calculating a turnover frequency in such cases can be challenging as the number of active sites can change depending on the reaction conditions. Here, we use CO oxidation kinetics to track Rh structural changes occurring during the reaction. The apparent activation energy, considering the nanoparticles as the active sites, was constant in different temperature regimes. However, in a stoichiometric excess of O₂, there were observed changes in the pre-exponential factor, which we link to changes in the number of active Rh sites. An excess of O₂ enhanced CO-induced Rh nanoparticle disintegration into single atoms, affecting catalyst activity. The temperature at which these structural changes occur depend on Rh particle size, with small particle sizes disintegrating at higher temperature, relative to the temperature required to break apart bigger particles. Rh structural changes were also observed during in situ infrared spectroscopic studies. Combining CO oxidation kinetics and spectroscopic studies allowed us to calculate the turnover frequency before and after nanoparticle redispersion into single atoms.

Force Decomposition Analysis: A Method to Decompose Intermolecular Forces into Physically Relevant Component Contributions

Computational quantum chemistry can be more than just numerical experiments when methods are specifically adapted to investigate chemical concepts. One important example is the development of energy decomposition analysis (EDA) to reveal the physical driving forces behind intermolecular interactions. In EDA, typically the interaction energy from a good-quality density functional theory (DFT) calculation is decomposed into multiple additive components that unveil permanent and induced electrostatics, Pauli repulsion, dispersion, and charge-transfer contributions to noncovalent interactions. Herein, we formulate, implement, and investigate decomposing the forces associated with intermolecular interactions into the same components. The resulting force decomposition analysis (FDA) is potentially useful as a complement to the EDA to understand chemistry, while also providing far more information than an EDA for data analysis purposes such as training physics-based force fields. We apply the FDA based on absolutely localized molecular orbitals (ALMOs) to analyze interactions of water with sodium and chloride ions as well as in the water dimer. We also analyze the forces responsible for geometric changes in carbon dioxide upon adsorption onto (and activation by) gold and silver anions. We also investigate how the force components of an EDA-based force field for water clusters, namely MB-UCB, compare to those from force decomposition analysis.

Boosting CO Catalytic Oxidation Performance via Highly Dispersed Copper Atomic Clusters: Regulated Electron Interaction and Reaction Pathways

Copper-loaded ceria (Cu/CeO₂) catalysts have become promising for the catalytic oxidation of industrial CO emissions. Since their superior redox property mainly arises from the synergistic effect between Cu and the CeO₂ support, the dispersion state of Cu species may dominate the catalytic performance of Cu/CeO₂ catalysts: the extremely high or low dispersity is disadvantageous for the catalytic performance. The nanoparticle catalysts usually present few contact sites, while the single-atom catalysts tend to be passivated due to their relatively single valence state. To achieve a suitable dispersion state, we synthesized a superior Cu/CeO₂ catalyst with Cu atomic clusters, realizing high atomic exposure and unit atomic activity simultaneously via favorable electron interaction and an anchoring effect. The catalyst reaches a 90% CO conversion at 130 °C, comparable to noble-metal catalysts. According to combined in situ spectroscopy and density functional theory calculations, the superior CO oxidation performance of the Cu atomic cluster catalyst results from the joint efforts of effective adsorption of CO at the electrophilic sites, the CO spillover phenomenon, and the efficient bicarbonate pathway triggered by hydroxyl. By providing a superior atomic cluster catalyst and uncovering the catalytic oxidation mechanism of Cu-Ce dual-active sites, our work may enlighten future research on industrial gaseous pollutant removal.

Highly Effective Pt-Co/ZSM-5 Catalysts with Low Pt Loading for Preferential CO Oxidation in H2-Rich Mixture

New Pt-Co catalysts of hydrogen purification from CO impurities for fuel cells were fabricated via the deposition of monodispersed 1.7 nm Pt nanoparticles using laser electrodispersion on Co-modified ZSM-5 prepared by the Co(CH3COO)2 impregnation. The structure of prepared Pt-Co zeolites was studied by low-temperature N2 sorption, TEM, EDX, and XPS methods. The comparative analysis of samples with different Pt (0.01–0.05 wt.%) and Co (2.5–4.5 wt.%) contents on zeolites with the ratio of Si/Al = 15, 28, and 40 was performed in the CO-PROX reaction in H2-rich mixture (1%CO + 1%O2 + 49%H2 + 49%He). The synergistic catalytic action of Pt and Co on zeolite surface makes it possible to completely remove CO from a mixture with hydrogen in a wide temperature range from 50 to 150 °C; the high efficiency of designed composites with low Pt loading is maintained for a long time. The enhancement of PROX performance originates from the formation of new active sites for the CO oxidation at the Pt-Co interfaces within zeolite channels and at the surface. In terms of their activity, stability, and selectivity, such composites are significantly superior to known supported Pt-Co catalysts.

Activity and Thermal Aging Stability of La1-xSrxMnO3 (x = 0.0, 0.3, 0.5, 0.7) and Ir/La1-xSrxMnO3 Catalysts for CO Oxidation with Excess O2

The catalytic oxidation of CO is probably the most investigated reaction in the literature, for decades, because of its extended environmental and fundamental importance. In this paper, the oxidation of CO on La_1-xSr_xMnO₃ perovskites (LSMx), either unloaded or loaded with dispersed Ir nanoparticles (Ir/LSMx), was studied in the temperature range 100-450 °C under excess O₂ conditions (1% CO + 5% O₂). The perovskites, of the type La_1-xSr_xMnO₃ (x = 0.0, 0.3, 0.5 and 0.7), were prepared by the coprecipitation method. The physicochemical and structural properties of both the LSMx and the homologous Ir/LSMx catalysts were evaluated by various techniques (XRD, N₂ sorption-desorption by BET-BJH, H₂-TPR and H₂-Chem), in order to better understand the structure-activity-stability correlations. The effect of preoxidation/prereduction/aging of the catalysts on their activity and stability was also investigated. Results revealed that both LSMx and Ir/LSMx are effective for CO oxidation, with the latter being superior to the former. In both series of materials, increasing the substitution of La by Sr in the composition of the perovskite resulted to a gradual suppression of their CO oxidation activity when these were prereduced; the opposite was true for preoxidized samples. Inverse hysteresis phenomena in activity were observed during heating/cooling cycles on the prereduced Ir/LSMx catalysts with the loop amplitude narrowing with increasing Sr-content in LSMx. Oxidative thermal sintering experiments at high temperatures revealed excellent antisintering behavior of Ir nanoparticles supported on LSMx, resulting from perovskite's favorable antisintering properties of high oxygen storage capacity and surface oxygen vacancies.

Effect of reduction pretreatments on PdAg/Al2O3 for HCHO and CO oxidation

PdAg/Al₂O₃ were pretreated by CO and H₂ reduction pretreatments, respectively. The reduced catalysts were tested for HCHO and CO oxidation and characterized by Brunner Emmet Teller (BET), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and oxygen temperature programmed desorption (O₂-TPD). These results indicate that the pretreatments have effect on PdAg reconstruction, PdAg particle size and active oxygen species, which are responsible for the catalytic performance. Compared with H₂ reduction method, CO reduction is more suitable for PdAg/Al₂O₃ pretreatment. PdAg/Al₂O₃-CO exhibited better catalytic performance.

Structural and photoelectron spectroscopic study on the heterotrinuclear nickel-titanium dioxide carbonyl complexes Ni2TiO2(CO) n - (n = 2-4)

Herein, the configurations and intrinsic electronic properties of heteronuclear transition metal dioxide carbonyl anions Ni₂TiO₂(CO) _n ^- (n = 2-4) in the gas phase were investigated using mass spectrometry coupled anionic photoelectron spectroscopy, ab initio calculations, and simulated density-of-state (DOS) spectra. The results clearly show that the binding of electrons is enhanced by the addition of CO. The ground state structures of Ni₂TiO₂(CO) _n ^- (n = 2-4) are characterized to show that three transition metal atoms (one Ti atom and two Ni atoms) forming a quasi-line is favored. The interaction between Ni and C becomes weaker as the cluster size increases. The natural electron configuration shows that the extra electron is enriched on O atoms attached to Ti, and there is strong interaction between Ti and O atoms. This work gives significant insight into the configuration and electronic structures of nickel-titanium dioxide carbonyl anions, which has potential application in adsorption of carbon monoxide on the surfaces/interfaces of alloys.

Atomically Incorporating Ni into Mesoporous CeO2 Matrix via Synchronous Spray-Pyrolysis as Efficient Noble-Metal-Free Catalyst for Low-Temperature CO Oxidation

Low-temperature catalytic CO oxidation is an important chemical process in versatile applications, such as the H₂ utilization for low-temperature H₂ air fuel cells. Pt-group metal catalysts are efficient but highly cost-consuming. This work demonstrates an excellent and sixpenny catalyst with earth-abundant Ni and Ce, in which Ni ions are atomically incorporated into the CeO₂ matrix (Ni-Ce-O_x) by synchronous spray-pyrolysis (SSP) of mixture nitrates of Ni and Ce. The Ni-Ce-O_x catalyst presents a mesoporous structure. Revealed by a model reaction of 1% CO, 1% O₂, and 98% balance He at a space velocity of 13,200 mL/g_cat/h, Ni-Ce-O_x catalysts display a typical volcano-shaped relationship between reactivity and Ni incorporation amount. The optimized Ni incorporation appears with a high Ni/Ce atomic ratio of 0.25, endowing the T₅₀ (temperature corresponding to a CO conversion of 50%), which is lower-shifted by 165 °C than that of pristine CeO₂ (266 °C). The density functional theory (DFT) calculations further indicate that the much-reduced oxygen vacancy formation energy at Ni-Ce single-atom sites boosted the adsorption activation of the CO molecule and therefore promoted the CO oxidation process. Besides, the₂ Ni-Ce-O_x from the SSP method presents better performance than the counterparts from immersion and hydrothermal methods. This work paves a way to access efficient noble-metal-free catalysts for low-temperature CO oxidation.

Adsorbed Oxygen Ions and Oxygen Vacancies: Their Concentration and Distribution in Metal Oxide Chemical Sensors and Influencing Role in Sensitivity and Sensing Mechanisms

Oxidation reactions on semiconducting metal oxide (SMOs) surfaces have been extensively worked on in catalysis, fuel cells, and sensors. SMOs engage powerfully in energy-related applications such as batteries, supercapacitors, solid oxide fuel cells (SOFCs), and sensors. A deep understanding of SMO surface and oxygen interactions and defect engineering has become significant because all of the above-mentioned applications are based on the adsorption/absorption and consumption/transportation of adsorbed (physisorbed-chemisorbed) oxygen. More understanding of adsorbed oxygen and oxygen vacancies (VO•,VO••) is needed, as the former is the vital requirement for sensing chemical reactions, while the latter facilitates the replenishment of adsorbed oxygen ions on the surface. We determined the relation between sensor response (sensitivity) and the amounts of adsorbed oxygen ions (O2(ads)−, O(ads), −O2(ads)2−, O(ads)2−), water/hydroxide groups (H2O/OH−), oxygen vacancies (VO•, VO••), and ordinary lattice oxygen ions (Olattice2−) as a function of temperature. During hydrogen (H2) testing, the different oxidation states (W6+, W5+, and W4+) of WO3 were quantified and correlated with oxygen vacancy formation (VO•, VO••). We used a combined application of XPS, UPS, XPEEM-LEEM, and chemical, electrical, and sensory analysis for H2 sensing. The sensor response was extraordinarily high: 424 against H2 at a temperature of 250 °C was recorded and explained on the basis of defect engineering, including oxygen vacancies and chemisorbed oxygen ions and surface stoichiometry of WO3. We established a correlation between the H2 sensing mechanism of WO3, sensor signal magnitude, the amount of adsorbed oxygen ions, and sensor testing temperature. This paper also provides a review of the detection, quantification, and identification of different adsorbed oxygen species. The different surface and bulk-sensitive characterization techniques relevant to analyzing the SMOs-based sensor are tabulated, providing the sensor designer with the chemical, physical, and electronic information extracted from each technique.

Porous unsupported CuO nanoplates for efficient photothermal CO oxidation

It is a significant issue for environmental protection and industrial production to eliminate CO, a gas harmful to life and some important reaction sites. Real environmental conditions require catalytic CO oxidation to occur at relatively low temperature. Nowadays, photothermal catalysis has been exploited as a new way to achieve CO elimination, different from thermal catalysis. CuO, as cheap and abundant substitute for precious metals, is considered to have potential in photothermal catalysis. Oxygen vacancies (O_V) and lattice oxygen (O_L) activity are considered extremely crucial for oxide catalysts in CO oxidation, according to Mars-van Krevelen mechanism. Herein, porous CuO nanoplates with adjustable O_Vand O_Lactivity were prepared by a facile method via controlling the morphology and phase composition of precursors. The light-off temperature (50% conversion) of the best sample obtained under the optimal conditions was ∼110 °C and an almost complete conversion was reached at ∼150 °C. It also achieved nearly 70% conversion under 6 standard Suns (6 kW cm^-2irradiation) and could work in infrared radiation (IR) regions, which could be attributed to the photo-induced thermal effect and activation effect. The simple synthesis and characterization provide a good example for the future photothermal catalysis.