Ordered Transfer from 3D-Oriented MOF Superstructures to Polymeric Films: Microfabrication, Enhanced Chemical Stability, and Anisotropic Fluorescent Patterns

Films and patterns of 3D-oriented metal-organic frameworks (MOFs) afford well-ordered pore structures extending across centimeter-scale areas. These macroscopic domains of aligned pores are pivotal to enhance diffusion along specific pathways and orient functional guests. The anisotropic properties emerging from this alignment are beneficial for applications in ion conductivity and photonics. However, the structure of 3D-oriented MOF films and patterns can rapidly degrade under humid and acidic conditions. Thus, more durable 3D-ordered porous systems are desired for practical applications. Here, oriented porous polymer films and patterns are prepared by using heteroepitaxially oriented N3-functionalized MOF films as precursor materials. The film fabrication protocol utilizes an azide-alkyne cycloaddition on the Cu2(AzBPDC)2DABCO MOF. The micropatterning protocol exploits the X-ray sensitivity of azide groups in Cu2(AzBPDC)2DABCO, enabling selective degradation in the irradiated areas. The masked regions of the MOF film retain their N3-functionality, allowing for subsequent cross-linking through azide-alkyne coupling. Subsequent acidic treatment removes the Cu ions from the MOF, yielding porous polymer micro-patterns. The polymer has high chemical stability and shows an anisotropic fluorescent response. The use of 3D-oriented MOF systems as precursors for the fabrication of oriented porous polymers will facilitate the progress of optical components for photonic applications.

Design Strategies for Structurally Controlled Polymer Surfaces via Cyclophane-Based CVD Polymerization and Post-CVD Fabrication

Molecular structuring of soft matter with precise arrangements over multiple hierarchical levels, especially on polymer surfaces, and enabling their post-synthetic modulation has tremendous potential for application in molecular engineering and interfacial science. Here, recent research and developments in design strategies for structurally controlled polymer surfaces via cyclophane-based chemical vapor deposition (CVD) polymerization with precise control over chemical functionalities and post-CVD fabrication via orthogonal surface functionalization that facilitates the formation of designable biointerfaces are summarized. Particular discussion about innovative approaches for the templated synthesis of shape-controlled CVD polymers, ranging from 1D to 3D architecture, including inside confined nanochannels, nanofibers/nanowires synthesis into an anisotropic media such as liquid crystals, and CVD polymer nanohelices via hierarchical chirality transfer across multiple length scales is provided. Aiming at multifunctional polymer surfaces via CVD copolymerization of multiple precursors, the structural and functional design of the fundamental [2.2]paracyclophane (PCP) precursor molecules, that is, functional CVD monomer chemistry is also described. Technologically advanced and innovative surface deposition techniques toward topological micro- and nanostructuring, including microcontact printing, photopatterning, photomask, and lithographic techniques such as dip-pen nanolithography, showcasing research from the authors' laboratories as well as other's relevant important findings in this evolving field are highlighted that have introduced new programmable CVD polymerization capabilities. Perspectives, current limitations, and future considerations are provided.

Deep-Learning-Assisted Stratification of Amyloid Beta Mutants Using Drying Droplet Patterns

The development of simple and accurate methods to predict mutations in proteins remains an unsolved challenge in modern biochemistry. It is discovered that critical information about primary and secondary peptide structures can be inferred from the stains left behind by their drying droplets. To analyze the complex stain patterns, deep-learning neuronal networks are challenged with polarized light microscopy images derived from the drying droplet deposits of a range of amyloid beta (1-42) (Aβ₄₂ ) peptides. These peptides differ in a single amino acid residue and represent hereditary mutants of Alzheimer's disease. Stain patterns are not only reproducible but also result in comprehensive stratification of eight amyloid beta (Aβ) variants with predictive accuracies above 99%. Similarly, peptide stains of a range of distinct Aβ₄₂ peptide conformations are identified with accuracies above 99%. The results suggest that a method as simple as drying a droplet of a peptide solution onto a solid surface may serve as an indicator of minute, yet structurally meaningful differences in peptides' primary and secondary structures. Scalable and accurate detection schemes for stratification of conformational and structural protein alterations are critically needed to unravel pathological signatures in many human diseases such as Alzheimer's and Parkinson's disease.

Protein Nanoparticles: Uniting the Power of Proteins with Engineering Design Approaches

Protein nanoparticles, PNPs, have played a long-standing role in food and industrial applications. More recently, their potential in nanomedicine has been more widely pursued. This review summarizes recent trends related to the preparation, application, and chemical construction of nanoparticles that use proteins as major building blocks. A particular focus has been given to emerging trends related to applications in nanomedicine, an area of research where PNPs are poised for major breakthroughs as drug delivery carriers, particle-based therapeutics or for non-viral gene therapy.

Covalent immobilization of gold nanoparticles on a plastic substrate and subsequent immobilization of biomolecules

We propose a novel approach to stably immobilize gold nanoparticles (AuNPs) on a plastic substrate and demonstrate that the modified substrate is also capable of immobilizing biomolecules. To immobilize citrate-capped AuNPs, an acrylic substrate was simply dip-coated in a functional polymer solution to decorate the outermost surface with amino groups. Electrostatic interactions between AuNPs and the amino groups immobilized the AuNPs with a high density. The AuNP-modified acrylic substrate was transparent with a red tint. A heat treatment promoted the formation of amide bonds between carboxy groups on the AuNPs and amino groups on the substrate surface. These covalent bonds stabilized the immobilized AuNPs and the resulting substrate was resistant to washing with acid and thiol-containing solutions. The surface density of AuNPs was controlled by the surface density of amino groups on the substrate surface, which was in turn controlled by the dip-coating in the functional polymer solution. We attempted to immobilize functional biomolecules on the AuNPs-functionalized plastic surface by two different approaches. An enzyme (horseradish peroxidase) was successfully immobilized on the AuNPs through amide formation and 5′-thiolated DNA was also immobilized on the AuNPs through S–Au interactions. These chemistries allow for simultaneous immobilization of two different kinds of biomolecules on a plastic substrate without loss of their functional properties.

We propose a novel approach to stably immobilize gold nanoparticles (AuNPs) on a plastic substrate and demonstrate that the modified substrate is also capable of immobilizing biomolecules.

In situ preparation of hetero-polymers/clay nanocomposites by CUAAC click chemistry

A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N₃) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using ¹H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/intercalated morphologies. In addition, the increase of MMT-N₃ loading not only improved the onset and maximum degradation temperatures of the nanocomposites but also their char yields. Furthermore, the incorporation of MMT-N₃ in the polymer matrix did not significantly influence the crystallization behavior of both PEG and PCL segments.

Vapor Sublimation and Deposition to Fabricate a Porous Methyl Propiolate-Functionalized Poly-p-xylylene Material for Copper-Free Click Chemistry

Conventional porous materials are mostly synthesized in solution-based methods involving solvents and initiators, and the functionalization of these porous materials usually requires additional and complex steps. In the current study, a methyl propiolate-functionalized porous poly-p-xylylene material was fabricated based on a unique vapor sublimation and deposition process. The process used a water solution and ice as the template with a customizable shape and dimensions, and the conventional chemical vapor deposition (CVD) polymerization of poly-p-xylylene on such an ice template formed a three-dimensional, porous poly-p-xylylene material with interconnected porous structures. More importantly, the functionality of methyl propiolate was well preserved by using methyl propiolate-substituted [2,2]-paracyclophane during the vapor deposition polymerization process and was installed in one step on the final porous poly-p-xylylene products. This functionality exhibited an intact structure and reactivity during the proposed vapor sublimation and deposition process and was proven to have no decomposition or side products after further characterization and conjugation experiments. The electron-withdrawing methyl propiolate group readily provided efficient alkynes as click azide-terminated molecules under copper-free and mild conditions at room temperature and in environmentally friendly solvents, such as water. The resulting methyl propiolate-functionalized porous poly-p-xylylene exhibited interface properties with clickable specific covalent attachment toward azide-terminated target molecules, which are widely available for drugs and biomolecules. The fabricated functional porous materials represent an advanced material featuring porous structures, a straightforward synthetic approach, and precise and controlled interface click chemistry, rendering long-term stability and efficacy to conjugate target functionalities that are expected to attract a variety of new applications.

Single-Molecule Orthogonal Double-Click Chemistry-Inorganic to Organic Nanostructure Transition

Thiasilacyclopentane (TSCP) and azasilacyclopentane (ASCP) heteroatom cyclics have proven capable of rapidly converting hydroxylated surfaces to functionalized surfaces in inorganic click reactions. In this work, we demonstrate that the use of these reagents can be extended to "simultaneous double-clicking" when both inorganic and organic substrates are present at the onset of the reaction. The simultaneous double-click depends on a first ring-opening click with an inorganic substrate that is complete in ∼1 s at 30 °C and results in the reveal of a cryptic mercaptan or secondary amine group, which can then participate in a second click with an organic substrate. TSCPs and ASCPs can take part in tandem double-click reactions in which the organic substrate is added to the reaction mixture after the initial inorganic click reaction is completed. Additionally, ASCPs with exocyclic functionality, specifically N-alkenyl-, N-aminoalkyl, and N-alkynyl-ASCPs, are shown to be options for tandem double-clicking in which functionalization proceeds in two independent steps and the sequence of the double-click reaction can be reversed.

Functionalization and Patterning of Self-Assembled Monolayers and Polymer Brushes Using Microcontact Chemistry

Because the surface connects a material to its environment, the functionalization, modification, and patterning of surfaces is key to a wide range of materials applied in microelectronics, displays, sensing, microarrays, photovoltaics, catalysis, and other fields. Self-assembled monolayers (SAMs), which can be deposited on a wide range of inorganic materials, are only a few nanometers thick, yet they can radically change the properties of the resulting interface. Alternatively, thin polymer films composed of polymer brushes grown from the surface provide a more robust molecular modification of inorganic materials. For many applications, patterned SAMs or polymer brushes are desired. Over the past decade, our group has shown that both SAMs as well as polymer brushes can be patterned very efficiently using microcontact printing. In microcontact printing, a molecular "ink" is deposited on a suitable substrate using a microstructured elastomer stamp, which delivers the ink exclusively in the area of contact between stamp and substrate. In contrast to most types of lithography, microcontact printing does not require expensive equipment. Our work has shown that "microcontact chemistry" is a powerful additive surface patterning method, in which molecular inks react with a precursor SAM during printing so that surfaces can be modified with various orthogonal functional groups or molecular recognition sites in microscale patterns. Functional groups include reactive groups for click chemistry or photochemistry and initiators for radical polymerization. Molecular recognition sites include host-guest chemistry as well as biochemical ligands such as carbohydrates and biotin. In this Account, we present an overview of our research in this area including selected examples of work by other groups. In the first part, we review our work on the patterning of SAMs using microcontact chemistry, with a focus on click chemistry and photochemistry. We will show how cycloadditions, thiol-ene reactions, and tetrazole chemistry can be used to obtain versatile surface patterns. In the second part, we demonstrate that microcontact chemistry can be used to pattern polymer brushes. Among others, initiators for surface-induced nitroxide-mediated polymerization and atom transfer polymerization were printed and used to grow patterned polymer brushes with molecular recognition groups suitable for responsive surface adhesion. In the third part, we describe how SAMs and polymer brushes can be printed on microparticles instead of flat substrates so that Janus particles with functional patches can be obtained. Finally, we present a brief outlook on further developments expected in this field.

Quantification of azide groups on a material surface and a biomolecule using a clickable and cleavable fluorescent compound

We propose a novel method for quantifying azide groups on a solid surface and a protein.

Synthesis of novel magnetic nano-sorbent functionalized with N-methyl-D-glucamine by click chemistry and removal of boron with magnetic separation method

Click chemistry refers to a group of reactions that are fast, simple to use, easy to purify, versatile, regiospecific, and give high product yields. Therefore, a novel, efficient magnetic nano-sorbent based on N-methyl-D-glucamine attached to magnetic nanoparticles was prepared using click coupling method. Its boron sorption capacity was compared with N-methyl-D-glucamine direct attached nano-sorbent. The characterization of the magnetic sorbents was investigated by several techniques such as X-ray diffraction, scanning electron microscope, transmission electron microscope, dynamic light scattering, thermogravimetric analysis, Fourier transform infrared spectrophotometer, and vibrating sample magnetometer. The boron sorption capacity of sorbents was compared by studying various essential factors influencing the sorption, like sorbate concentration, sorbents dosage, pH of the solution, and contact time. Langmuir and Freundlich and Dubinin-Radushkevich adsorption isotherms models were applied. Percent removal and sorption capacities efficiencies of sorbents obtained with direct and click coupling are found to be 49.5%, 98.7% and 6.68 mg/g, 13.44 mg/g respectively. Both sorbents have been found to be compatible with Langmuir isotherm, and the boron sorption kinetics conforms to the pseudo second order kinetics. The reusability study of sorbents was carried out five times for boron sorption and desorption.

Substrate-Independent Micropatterning of Polymer Brushes Based on Photolytic Deactivation of Chemical Vapor Deposition Based Surface-Initiated Atom-Transfer Radical Polymerization Initiator Films

Precise microscale arrangement of biomolecules and cells is essential for tissue engineering, microarray development, diagnostic sensors, and fundamental research in the biosciences. Biofunctional polymer brushes have attracted broad interest in these applications. However, patterning approaches to creating microstructured biointerfaces based on polymer brushes often involve tedious, expensive, and complicated procedures that are specifically designed for model substrates. We report a substrate-independent, facile, and scalable technique with which to prepare micropatterned biofunctional brushes with the ability to generate binary chemical patterns. Employing chemical vapor deposition (CVD) polymerization, a functionalized polymer coating decorated with 2-bromoisobutyryl groups that act as atom-transfer radical polymerization (ATRP) initiators was prepared and subsequently modified using UV light. The exposure of 2-bromoisobutyryl groups to UV light with wavelengths between 187 and 254 nm resulted in selective debromination, effectively eliminating the initiation of ATRP. In addition, when coatings incorporating both 2-bromoisobutyryl and primary amine groups were irradiated with UV light, the amines retained their functionality after UV treatment and could be conjugated to activated esters, facilitating binary chemical patterns. In contrast, polymer brushes were selectively grown from areas protected from UV treatment, as confirmed by atomic force microscopy, time-of-flight secondary ion mass spectrometry, and imaging ellipsometry. Furthermore, spatial control over biomolecular adhesion was achieved in three ways: (1) patterned nonfouling brushes resulted in nonspecific protein adsorption to areas not covered with polymer brushes; (2) patterned brushes decorated with active binding sides gave rise to specific protein immobilization on areas presenting polymer brushes; (3) and primary amines were co-patterned along with clickable polymer brushes bearing pendant alkyne groups, leading to bifunctional reactivity. Because this novel technique is independent of the original substrate's physicochemical properties, it can be extended to technologically relevant substrates such as polystyrene, polydimethylsiloxane, polyvinyl chloride, and steel. With further work, the photolytic deactivation of CVD-based initiator coatings promises to advance the utility of patterned biofunctional polymer brushes across a spectrum of biomedical applications.

Vapor sublimation and deposition to build porous particles and composites

The vapor deposition of polymers on regular stationary substrates is widely known to form uniform thin films. Here we report porous polymer particles with sizes controllable down to the nanometer scale can be produced using a fabrication process based on chemical vapor deposition (CVD) on a dynamic substrate, i.e., sublimating ice particles. The results indicate that the vapor deposition of a polymer is directed by the sublimation process; instead of forming a thin film polymer, the deposited polymers replicated the size and shape of the ice particle. Defined size and porosity of the polymer particles are controllable with respect to varying the processing time. Extendable applications are shown to install multiple functional sites on the particles in one step and to localize metals/oxides forming composite particles. In addition, one fabrication cycle requires approximately 60 min to complete, and potential scaling up the production of the porous particles is manageable.

Controlling Surface Segregation of a Polymer To Display Carboxy Groups on an Outermost Surface Using Perfluoroacyl Groups

Controlling the surface properties of solid polymers is important for practical applications. We here succeeded in controlling the surface segregation of polymers to display carboxy groups on an outermost surface, which allowed the covalent immobilization of functional molecules via the carboxy groups on a substrate surface. Random methacrylate-based copolymers containing carboxy groups, which were protected with perfluoroacyl (R_f) groups, were dip-coated on acrylic substrate surfaces. X-ray photoelectron spectroscopy and contact-angle measurements revealed that the R_f groups were segregated to the outermost surface of the dip-coated substrates. The R_f groups were removed by hydrolysis of the R_f esters in the copolymers, resulting in the display of carboxy groups on the surface. The quantification of carboxy groups on a surface revealed that the carboxy groups were reactive to a water-soluble solute in an aqueous solution. The surface segregation was affected by the molecular structure of the copolymer used for dip-coating.

Robust label-free biosensing using microdisk laser arrays with on-chip references

Whispering-gallery mode (WGM) microdisk lasers show great potential for highly sensitive label-free detection in large-scale sensor arrays. However, when used in practical applications under normal ambient conditions, these devices suffer from temperature fluctuations and photobleaching. Here we demonstrate that these challenges can be overcome by a novel referencing scheme that allows for simultaneous compensation of temperature drift and photobleaching. The technique relies on reference structures protected by locally dispensed passivation materials, and can be scaled to extended arrays of hundreds of devices. We prove the viability of the concept in a series of experiments, demonstrating robust and sensitive label-free detection over a wide range of constant or continuously varying temperatures. To the best of our knowledge, these measurements represent the first demonstration of biosensing in active WGM devices with simultaneous compensation of both photobleaching and temperature drift.

Lotus-on-chip: computer-aided design and 3D direct laser writing of bioinspired surfaces for controlling the wettability of materials and devices

In this study we present the combination of a math-based design strategy with direct laser writing as high-precision technology for promoting solid free-form fabrication of multi-scale biomimetic surfaces. Results show a remarkable control of surface topography and wettability properties. Different examples of surfaces inspired on the lotus leaf, which to our knowledge are obtained for the first time following a computer-aided design with this degree of precision, are presented. Design and manufacturing strategies towards microfluidic systems whose fluid driving capabilities are obtained just by promoting a design-controlled wettability of their surfaces, are also discussed and illustrated by means of conceptual proofs. According to our experience, the synergies between the presented computer-aided design strategy and the capabilities of direct laser writing, supported by innovative writing strategies to promote final size while maintaining high precision, constitute a relevant step forward towards materials and devices with design-controlled multi-scale and micro-structured surfaces for advanced functionalities. To our knowledge, the surface geometry of the lotus leaf, which has relevant industrial applications thanks to its hydrophobic and self-cleaning behavior, has not yet been adequately modeled and manufactured in an additive way with the degree of precision that we present here.

Micro- and nano-surface structures based on vapor-deposited polymers

Vapor-deposition processes and the resulting thin polymer films provide consistent coatings that decouple the underlying substrate surface properties and can be applied for surface modification regardless of the substrate material and geometry. Here, various ways to structure these vapor-deposited polymer thin films are described. Well-established and available photolithography and soft lithography techniques are widely performed for the creation of surface patterns and microstructures on coated substrates. However, because of the requirements for applying a photomask or an elastomeric stamp, these techniques are mostly limited to flat substrates. Attempts are also conducted to produce patterned structures on non-flat surfaces with various maskless methods such as light-directed patterning and direct-writing approaches. The limitations for patterning on non-flat surfaces are resolution and cost. With the requirement of chemical control and/or precise accessibility to the linkage with functional molecules, chemically and topographically defined interfaces have recently attracted considerable attention. The multifunctional, gradient, and/or synergistic activities of using such interfaces are also discussed. Finally, an emerging discovery of selective deposition of polymer coatings and the bottom-up patterning approach by using the selective deposition technology is demonstrated.

Backbone-Degradable Polymers Prepared by Chemical Vapor Deposition

Polymers prepared by chemical vapor deposition (CVD) polymerization have found broad acceptance in research and industrial applications. However, their intrinsic lack of degradability has limited wider applicability in many areas, such as biomedical devices or regenerative medicine. Herein, we demonstrate, for the first time, a backbone-degradable polymer directly synthesized via CVD. The CVD co-polymerization of [2.2]para-cyclophanes with cyclic ketene acetals, specifically 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), results in well-defined, hydrolytically degradable polymers, as confirmed by FTIR spectroscopy and ellipsometry. The degradation kinetics are dependent on the ratio of ketene acetals to [2.2]para-cyclophanes as well as the hydrophobicity of the films. These coatings address an unmet need in the biomedical polymer field, as they provide access to a wide range of reactive polymer coatings that combine interfacial multifunctionality with degradability.

A Synthetic Toolbox for the In Situ Formation of Functionalized Homo- and Heteropolysaccharide-Based Hydrogel Libraries

A synthetic toolbox for the introduction of aldehydo and hydrazido groups into the polysaccharides hyaluronic acid, alginate, dextran, pullulan, glycogen, and carboxymethyl cellulose and their use for hydrogel formation is reported. Upon mixing differently functionalized polysaccharides derived from the same natural precursor, hydrazone cross-linking takes place, which results in formation of a hydrogel composed of one type of polysaccharide backbone. Likewise, hydrogels based on two different polysaccharide strands can be formed after mixing the corresponding aldehydo- and hydrazido-modified polysaccharides. A second line of these studies paves the way to introduce a biomedically relevant ligand, namely, the adhesion factor cyclic RGD pentapeptide, by using an orthogonal click reaction. This set of modified polysaccharides served to create a library of hydrogels that differ in the combination of polysaccharide strands and the degree of cross-linking. The different hydrogels were evaluated with respect to their rheological properties, their ability to absorb water, and their cytotoxicity towards human fibroblast cell cultures. None of the hydrogels studied were cytotoxic, and, hence, they are in principal biocompatible for applications in tissue engineering.

Multifunctional and Continuous Gradients of Biointerfaces Based on Dual Reverse Click Reactions

Chemical or biological gradients that are composed of multifunctional and/or multidirectional guidance cues are of fundamental importance for prospective biomaterials and biointerfaces. As a proof of concept, a general modification approach for generating multifunctional and continuous gradients was realized via two controlled and reversed click reactions, namely, thermo-activated thiol-yne and copper-free alkyne and azide click reactions. The cell adhesion property of fibroblasts was guided in a gradient with an enhancement, showing that the PEG molecule and RGD peptide were countercurrently immobilized to form such reversed gradients (with negating of the cell adhesion property). Using the gradient modification protocol to also create countercurrent distributions of FGF-2 and BMP-2 gradients, the demonstration of not only multifunctional but also gradient biointerfacial properties was resolved in time latencies on one surface by showing the manipulation in gradients toward proliferation and osteogenic differentiation for adipose-derived stem cells.

Direct and reversible immobilization and microcontact printing of functional proteins on glass using a genetically appended silica-binding tag

Fusion of disulfide-constrained or linear versions of the Car9 dodecapeptide to model fluorescent proteins support their on-contact and oriented immobilization onto unmodified glass. Bound proteins can be released and the surface regenerated by incubation with l-lysine. This noncovalent chemistry enables rapid and reversibe microcontact printing of tagged proteins and speeds up the production of bicontinuous protein patterns.

Towards mussel-like on-demand coatings: light-triggered polymerization of dopamine through a photoinduced pH jump

Polydopamine polymerization was achieved through a photoinduced pH jump involving the irradiation of a photobase generator.

Multifaceted and route-controlled “click” reactions based on vapor-deposited coatings

Multifaceted and route-controlled click reactions are realized using functionalized poly-para-xylylene coatings, and the concurrent display of orthogonal interface properties is demonstrated.

Selective and Reversible Binding of Thiol-Functionalized Biomolecules on Polymers Prepared via Chemical Vapor Deposition Polymerization

We use chemical vapor deposition polymerization to prepare a novel dibromomaleimide-functionalized polymer for selective and reversible binding of thiol-containing biomolecules on a broad range of substrates. We report the synthesis and CVD polymerization of 4-(3,4-dibromomaleimide)[2.2]paracyclophane to yield nanometer thick polymer coatings. Fourier transformed infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the chemical composition of the polymer coating. The reactivity of the polymer coating toward thiol-functionalized molecules was confirmed using fluorescent ligands. As a proof of concept, the binding and subsequent release of cysteine-modified peptides from the polymer coating were also demonstrated via sum frequency generation spectroscopy. This reactive polymer coating provides a flexible surface modification approach to selectively and reversibly bind biomolecules on a broad range of materials, which could open up new opportunities in many biomedical sensing and diagnostic applications where specific binding and release of target analytes are desired.

Hierarchically functionalized magnetic core/multishell particles and their postsynthetic conversion to polymer capsules

The controlled synthesis of hierarchically functionalized core/multishell particles is highly desirable for applications in medicine, catalysis, and separation. Here, we describe the synthesis of hierarchically structured metal-organic framework multishells around magnetic core particles (magMOFs) via layer-by-layer (LbL) synthesis. The LbL deposition enables the design of multishell systems, where each MOF shell can be modified to install different functions. Here, we used this approach to create controlled release capsules, in which the inner shell serves as a reservoir and the outer shell serves as a membrane after postsynthetic conversion of the MOF structure to a polymer network. These capsules enable the controlled release of loaded dye molecules, depending on the surrounding media.

The impact of 1,2,3-triazoles in the design of functional coatings

This review article presents an overview of the application of 1,2,3-triazoles in the design of various high performance organic coatings with properties like anti-corrosive, anti-microbial, self-healing, hybrid nanocomposite, bio degradableetc.

UV-triggered dopamine polymerization: control of polymerization, surface coating, and photopatterning

UV irradiation is demonstrated to initiate dopamine polymerization and deposition on different surfaces under both acidic and basic pH. The observed acceleration of the dopamine polymerization is explained by the UV-induced formation of reactive oxygen species that trigger dopamine polymerization. The UV-induced dopamine polymerization leads to a better control over polydopamine deposition and formation of functional polydopamine micropatterns.

Sequential and parallel dual labeling of nanoparticles using click chemistry

Bioorthogonal 'click' reactions have recently emerged as promising tools for chemistry and biological applications. By using a combination of two different 'click' reactions, 'double-click' strategies have been developed to attach multiple labels onto biomacromolecules. These strategies require multi-step modifications of the biomacromolecules that can lead to heterogeneity in the final conjugates. Herein, we report the synthesis and characterization of a set of three trifunctional linkers. The linkers having alkyne and cyclooctyne moieties that are capable of participating in sequential copper(I)-catalyzed and copper-free cycloaddition reactions with azides. We have also prepared a linker comprised of an alkyne and a 1,2,4,5-terazine moiety that allows for simultaneous cycloaddition reactions with azides and trans-cyclooctenes, respectively. These linkers can be attached to synthetic or biological macromolecules to create a platform capable of sequential or parallel 'double-click' labeling in biological systems. We show this potential using a generation 5 (G5) polyamidoamine (PAMAM) dendrimer in combination with the clickable linkers. The dendrimers were successfully modified with these linkers and we demonstrate both sequential and parallel 'double-click' labeling with fluorescent reporters. We anticipate that these linkers will have a variety of application including molecular imaging and monitoring of macromolecule interactions in biological systems.

Sequential "click" - "photo-click" cross-linker for catalyst-free ligation of azide-tagged substrates

Heterobifunctional linker allows for selective catalyst-free ligation of two different azide-tagged substrates via strained-promoted azide-alkyne cycloaddition (SPAAC). The linker contains an azadibenzocyclooctyne (ADIBO) moiety on one end and a cyclopropenone-masked dibenzocyclooctyne (photo-DIBO) group on the other. The first azide-derivatized substrate reacts only at the ADIBO end of the linker as the photo-DIBO moiety is azide-inert. After the completion of the first SPAAC step, photo-DIBO is activated by brief exposure to 350 nm light from a fluorescent UV lamp. The unmasked DIBO group then reacts with the second azide-tagged substrate. Both click reactions are fast (k = 0.4 and 0.07 M(-1) s(-1), respectively) and produce quantitative yield of ligation in organic solvents or aqueous solutions. The utility of the new cross-linker has been demonstrated by conjugation of azide functionalized bovine serum albumin (azido-BSA) with azido-fluorescein and by the immobilization of the latter protein on azide-derivatized silica beads. The BSA-bead linker was designed to incorporate hydrolytically labile fragment, which permits release of protein under the action of dilute acid. UV activation of the second click reaction permits spatiotemporal control of the ligation process.

Chemically orthogonal three-patch microparticles

Compared to two-dimensional substrates, only a few methodologies exist for the spatially controlled decoration of three-dimensional objects, such as microparticles. Combining electrohydrodynamic co-jetting with synthetic polymer chemistry, we were able to create two- and three-patch microparticles displaying chemically orthogonal anchor groups on three distinct surface patches of the same particle. This approach takes advantage of a combination of novel chemically orthogonal polylactide-based polymers and their processing by electrohydrodynamic co-jetting to yield unprecedented multifunctional microparticles. Several micropatterned particles were fabricated displaying orthogonal click functionalities. Specifically, we demonstrate novel two- and three-patch particles. Multi-patch particles are highly sought after for their potential to present multiple distinct ligands in a directional manner. This work clearly establishes a viable route towards orthogonal reaction strategies on multivalent micropatterned particles.

Exploiting end group functionalization for the design of antifouling bioactive brushes

The Diels–Alder reaction between cyclopentadiene and maleimide is exploited to immobilize proteins on the chain-end of polymer brushes.

Co-immobilization of biomolecules on ultrathin reactive chemical vapor deposition coatings using multiple click chemistry strategies

Immobilization of biomolecules, such as proteins or sugars, is a key issue in biotechnology because it enables the understanding of cellular behavior in more biological relevant environment. Here, poly(4-ethynyl-p-xylylene-co-p-xylylene) coatings have been fabricated by chemical vapor deposition (CVD) polymerization in order to bind bioactive molecules onto the surface of the material. The control of the thickness of the CVD films has been achieved by tuning the amount of precursor used for deposition. Copper-catalyzed Huisgen cycloaddition has then been performed via microcontact printing to immobilize various biomolecules on the reactive coatings. The selectivity of this click chemistry reaction has been confirmed by spatially controlled conjugation of fluorescent sugar recognizing molecules (lectins) as well as cell adhesion onto the peptide pattern. In addition, a microstructured coating that may undergo multiple click chemistry reactions has been developed by two sequential CVD steps. Poly(4-ethynyl-p-xylylene-co-p-xylylene) and poly(4-formyl-p-xylylene-co-p-xylylene) have been patterned via vapor-assisted micropatterning in replica structures (VAMPIR). A combination of Huisgen cycloaddition and carbonyl-hydrazide coupling was used to spatially direct the immobilization of sugars on a patterned substrate. This work opens new perspectives in tailoring microstructured, multireactive interfaces that can be decorated via bio-orthogonal chemistry for use as mimicking the biological environment of cells.

Peptide-functionalized oxime hydrogels with tunable mechanical properties and gelation behavior

We demonstrate the formation of polyethylene glycol (PEG) based hydrogels via oxime ligation and the photoinitiated thiol-ene 3D patterning of peptides within the hydrogel matrix postgelation. The gelation process and final mechanical strength of the hydrogels can be tuned using pH and the catalyst concentration. The time scale to reach the gel point and complete gelation can be shortened from hours to seconds using both pH and aniline catalyst, which facilitates the tuning of the storage modulus from 0.3 to over 15 kPa. Azide- and alkene-functionalized hydrogels were also synthesized, and we have shown the post gelation "click"-type Huisgen 1,3 cycloaddition and thiolene-based radical reactions for spatially defined peptide incorporation. These materials are the initial demonstration for translationally relevant hydrogel materials that possess tunable mechanical regimes attractive to soft tissue engineering and possess atom neutral chemistries attractive for post gelation patterning in the presence or absence of cells.