Rapid, Simple, and High-Throughput Antimicrobial Susceptibility Testing and Antibiotics Screening

Activated alkyne-enabled turn-on click bioconjugation with cascade signal amplification for ultrafast and high-throughput antibiotic screening

Antimicrobial susceptibility testing plays a pivotal role in the discovery of new antibiotics. However, the development of simple, sensitive, and rapid assessment approaches remains challenging. Herein, we report an activated alkyne-based cascade signal amplification strategy for ultrafast and high-throughput antibiotic screening. First of all, a novel water-soluble aggregation-induced emission (AIE) luminogen is synthesized, which contains an activated alkyne group to enable fluorescence turn-on and metal-free click bioconjugation under physiological conditions. Taking advantage of the in-house established method for bacterial lysis, a number of clickable biological substances (i.e., bacterial solutes and debris) are released from the bacterial bodies, which remarkably increases the quantity of analytes. By means of the activated alkyne-mediated turn-on click bioconjugation, the system fluorescence signal is significantly amplified due to the increased labeling sites as well as the AIE effect. Such a cascade signal amplification strategy efficiently improves the detection sensitivity and thus enables ultrafast antimicrobial susceptibility assessment. By integration with a microplate reader, this approach is further applied to high-throughput antibiotic screening.

Theranostic FRET Gate to Visualize and Quantify Bacterial Membrane Breaching

Designing new antimicrobial-cum-probes to study real-time bacterial membrane breaching and concurrently developing inquisitorial image-based analytical tools is essential for the treatment of infectious diseases. An array of aggregation-induced emission (AIE) polymers (donor) consisting of neutral, anionic, and cationic charges were designed and employed as antimicrobial theranostic gatekeepers for the permeabilization of the peptidoglycan layer-adherable crystal violet (CV, acceptor). An AIE-active tetraphenylethylene (TPE)-tagged polycaprolactone biodegradable platform was chosen, and their self-assembled tiny amphiphilic nanoparticles were employed as a gatekeeper in the construction of bacterial membrane-reinforced fluorescent resonance energy transfer (FRET) probes. Electrostatic adhering of the cationic AIE polymer and subsequent gate opening aided fluorescent FRET probe activation on the membrane of Gram-negative bacteria, Escherichia coli. The selective photoexcitation energy transfer process in confocal microscopy experiments facilitated the building of a visualization-based FRET assay for the quantification of bactericidal activity. Nonantimicrobial AIE polymers (neutral and anionic) did not breach the bacterial membrane, resulting in no FRET signal. Detailed photophysical studies were done to establish the FRET probe mechanism, and a proof of concept was established.

Polarity-Sensitive Fluorescent Probe for Reflecting the Packing Degree of Bacterial Membrane Lipids

The maintenance of an intact membrane structure is of great importance for bacteria to execute various biological functions. However, chemical probes for monitoring the dynamic changes of bacterial membranes are barely reported. Herein, we, for the first time, report a novel polarity-sensitive probe for reflecting the packing degree of bacterial membrane lipids. Specifically, we synthesize a membrane-targeting fluorescent probe (TICT-lipid) that possesses both twist intramolecular charge transfer and aggregation-induced emission properties. TICT-lipid exhibits sensitive responses to the minute difference in the packing degree of membrane lipids, facilitating rapid differentiation of Gram-negative and Gram-positive bacteria. Interestingly, in the presence of membrane-disrupting antibiotics, the localization of TICT-lipid shifts from the outer membrane to the cell membrane by outputting blue-shifted and enhanced emission, making the mechanism of action of antibiotics clearly visible. TICT-lipid is a polarity-sensitive fluorescent probe, holding great promise in the study of membrane-related bacterial processes and antibiotic screening.

Advances in aggregation induced emission (AIE) materials in biosensing and imaging of bacteria

With their ubiquitous nature, bacteria have had a significant impact on human health and evolution. Though as commensals residing in/on our bodies several bacterial communities support our health in many ways, bacteria remain one of the major causes of infectious diseases that plague the human world. Adding to this, emergence of antibiotic resistant strains limited the use of available antibiotics. The current available techniques to prevent and control such infections remain insufficient. This has been proven during one of greatest pandemic of our generation, COVID-19. It has been observed that bacterial coinfections were predominantly observed in COVID-19 patients, despite antibiotic treatment. Such higher rates of coinfections in critical patients even after antibiotic treatment is a matter of concern. Owing to many reasons across the world drug resistance in bacteria is posing a major problem i. According to Center for Disease control (CDC) antibiotic report threats (AR), 2019 more than 2.8 million antibiotic resistant cases were reported, and more than 35,000 were dead among them in USA alone. In both normal and pandemic conditions, failure of identifying infectious agent has played a major role. This strongly prompts the need to improve upon the existing techniques to not just effective identification of an unknown bacterium, but also to discriminate normal Vs drug resistant strains. New techniques based on Aggregation Induced Emission (AIE) are not only simple and rapid but also have high accuracy to visualize infection and differentiate many strains of bacteria based on biomolecular variations which has been discussed in this chapter.

Recent progress in fluorescent probes for bacteria

Food fermentation, antibiotics, and pollutant degradation are closely related to bacteria. Bacteria play an irreplaceable role in life. However, some bacteria seriously threaten human health and cause large-scale infectious diseases. Therefore, there is a pressing need to develop strategies to accurately monitor bacteria. Technology based on molecular probes and fluorescence imaging is noninvasive, results in little damage, and has high specificity and sensitivity, so it has been widely applied in the detection of bacteria. In this review, we summarize the recent progress in bacterial detection using fluorescence. In particular, we generalize the mechanisms commonly used to design organic fluorescent probes for detecting and imaging bacteria. Moreover, a perspective regarding fluorescent probes for bacterial detection is discussed.

Antimicrobial Susceptibility Testing in a Rapid Single Test via an Egg-like Multivolume Microchamber-Based Microfluidic Platform

Fast determination of antimicrobial agents' effectiveness (susceptibility/resistance pattern) is an essential diagnostic step for treating bacterial infections and stopping world-wide outbreaks. Here, we report an egg-like multivolume microchamber-based microfluidic (EL-MVM²) platform, which is used to produce a wide range of gradient-based antibiotic concentrations quickly (∼10 min). The EL-MVM² platform works based upon testing a bacterial suspension in multivolume microchambers (microchamber sizes that range from a volume of 12.56 to 153.86 nL). Antibiotic molecules from a stock solution diffuse into the microchambers of various volumes at the same loading rate, leading to different concentrations among the microchambers. Therefore, we can quickly and easily produce a robust antibiotic gradient-based concentration profile. The EL-MVM² platform's diffusion (loading) pattern was investigated for different antibiotic drugs using both computational fluid dynamics simulations and experimental approaches. With an easy-to-follow protocol for sample loading and operation, the EL-MVM² platform was also found to be of high precision with respect to predicting the susceptibility/resistance outcome (>97%; surpassing the FDA-approval criterion for technology-based antimicrobial susceptibility testing instruments). These features indicate that the EL-MVM² is an effective, time-saving, and precise alternative to conventional antibiotic susceptibility testing platforms currently being used in clinical diagnostics and point-of-care settings.

Polymer Electrochromism Driven by Metabolic Activity Facilitates Rapid and Facile Bacterial Detection and Susceptibility Evaluation

The electrochromism of a water-soluble naturally oxidized electrochromic polymer, ox-PPE, is harnessed for rapid and facile bacterial detection, discrimination, and susceptibility testing. The ox-PPE solution shows distinct colorimetric and spectroscopic changes within 30 min when mixed with live bacteria. For the underlying mechanism, it is found that ox-PPE responds to the reducing species (e.g. cysteine and glutathione) released by metabolically active bacteria. This reduction reaction is ubiquitous among various bacterial strains, with a noticeable difference that enables discrimination of Gram-negative and Gram-positive bacterial strains. Combining ox-PPE with antibiotics, methicillin-susceptible and -resistant S. aureus can be differentiated within 2.5 h. Proof-of-concept demonstration of ox-PPE for antimicrobial susceptibility testing is carried out by incubating E. coli with various antibiotics. The obtained minimum inhibition concentrations are consistent with the conventional culture-based methods, but with the procedure time significantly shortened to 3 h.

Surface Functional Nanofiber Membrane for Ultrasensitive and Naked-Eye Visualization of Bacterial Concentration

Bacterial contamination in water is a serious health risk to human beings, so it is very important to realize the point-of-care (POC) bacterial detection in water. However, the traditional bacterial detection methods are time-consuming, professional- and equipment-dependent, and do not meet the needs of POC detection. There is a pressing need to develop a platform for POC bacterial detection to defeat the increasing risk of bacterial infections. Herein, a surface functional nanofiber membrane (NFM) is prepared by layer-by-layer (LBL) self-assembly as a platform for POC detection of bacterial concentration; it is naked-eye visualization and ultrasensitive. The platform shows obvious bacterial responsiveness, which allows naked-eye visualization of bacterial concentration (10²-10⁶ CFU/mL) within 30 min and can quantitatively detect the bacterial concentration (10¹-10⁶ CFU/mL) by fluorescence within 5 min. The platform not only exhibits high efficiency but also has a low threshold for bacterial concentration detection. Furthermore, the platform shows good consistency with traditional methods in the detection of bacteria in practical water samples, and has the potential for use in detecting bacterial concentrations in water supplies to protect human beings from health hazards. This work also provides useful reference for research on bacterial detection, taking advantage of the surface characteristics of bacteria and the high sensitivity of NFM.

Conjugated Polymer-Quantum Dot Hybrid Materials for Pathogen Discrimination and Disinfection

In this work, a new platform for pathogen discrimination and killing based on a conjugated polymer-quantum dot hybrid material was designed and constructed through the fluorescence resonance energy transfer (FRET) process. The hybrid material comprises water-soluble anionic CdSe/ZnS quantum dots (QDs) and a cationic poly(fluorene-alt-phenylene) derivative (PFP) through electrostatic interactions, thus promoting efficient FRET between PFP and QDs. Upon addition of different pathogen strains, the FRET from PFP to QDs was interrupted because of the competitive binding between PFP and the pathogens. Complexation of PFP and QDs also reduced the dark toxicity to a more desirable level, therefore potentially realizing the controllable killing of pathogens. The technique provides a promising theranostic platform in pathogen discrimination and disinfection based on FRET and phototoxicity of the PFP and QDs.

Adaptable microfluidic system for single-cell pathogen classification and antimicrobial susceptibility testing

Infectious diseases caused by bacterial pathogens remain one of the most common causes of morbidity and mortality worldwide. Rapid microbiological analysis is required for prompt treatment of bacterial infections and to facilitate antibiotic stewardship. This study reports an adaptable microfluidic system for rapid pathogen classification and antimicrobial susceptibility testing (AST) at the single-cell level. By incorporating tunable microfluidic valves along with real-time optical detection, bacteria can be trapped and classified according to their physical shape and size for pathogen classification. By monitoring their growth in the presence of antibiotics at the single-cell level, antimicrobial susceptibility of the bacteria can be determined in as little as 30 minutes compared with days required for standard procedures. The microfluidic system is able to detect bacterial pathogens in urine, blood cultures, and whole blood and can analyze polymicrobial samples. We pilot a study of 25 clinical urine samples to demonstrate the clinical applicability of the microfluidic system. The platform demonstrated a sensitivity of 100% and specificity of 83.33% for pathogen classification and achieved 100% concordance for AST.

Polyprodrug Antimicrobials: Remarkable Membrane Damage and Concurrent Drug Release to Combat Antibiotic Resistance of Methicillin-Resistant Staphylococcus aureus

The increased threat of antibiotic resistance has created an urgent need for new strategies. Herein, polyprodrug antimicrobials are proposed to mimic antimicrobial peptides appended with a concurrent drug release property, exhibiting broad-spectrum antibacterial activity and especially high potency to inhibit methicillin-resistant Staphylococcus aureus (MRSA) without inducing resistance. Two series of polyprodrug antimicrobials are fabricated by facile polymerization of triclosan prodrug monomer (TMA) and subsequent quaternization of hydrophilic poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), affording PDMAEMA-b-PTMA and PQDMA-b-PTMA, respectively. Optimized samples with proper hydrophobic ratio are screened out, which exhibit remarkable bacterial inhibition and low hemolysis toward red blood cells. Furthermore, synergistic antibacterial mechanisms contribute to the bacteria killing, including serious membrane damage, increased out-diffusion of cytosolic milieu across the membrane, and intracellular reductive milieu-mediated triclosan release. No detectable resistance is observed for polyprodrug antimicrobials against MRSA, which is demonstrated to be better than commercial triclosan and vancomycin against in vivo MRSA-infected burn models and a promising approach to the hurdle of antibiotic resistance in biomedicine.

Metal Nanoparticles for Diagnosis and Therapy of Bacterial Infection

Infectious diseases caused by pathogenic bacteria, especially multidrug-resistant bacteria, and their global spreading have become serious public health concerns. Early diagnosis and effective therapy can efficiently prevent deterioration and further spreading of the infections. There is an urgent need for sensitive, selective, and facile diagnosis as well as therapeutically potent treatment. The emergence of nanotechnology has provided more options for diagnosis and treatments of bacterial infections. Metal nanoparticles and metal oxide nanoparticles have drawn intense attention owing to their unique optical, magnetic, and electrical properties. These versatile metal-based nanoparticles have great potential for selective detection of bacteria and/or therapy. This review gives an overview of recent efforts on developing various metal-based nanoparticles for bacterial detection and infection therapy. It begins with an introduction of fundamental concepts and mechanisms in designing diagnostic and therapeutic strategies. Representative achievements are selected to illustrate the proof-of-concept in vitro and in vivo applications. A brief discussion of challenges and perspective outlook in this field is provided at the end of this review.

A multifunctional luminogen with aggregation-induced emission characteristics for selective imaging and photodynamic killing of both cancer cells and Gram-positive bacteria

The increasing impact of bacteria on cancer progression and treatments has been witnessed in recent years. Insufficient attention to cancer-related bacteria may lead to distant metastasis, poor therapeutic efficiency and low survival rates for cancers. Exploiting new approaches that enable selective imaging and effective killing of cancer cells and bacteria are thus of great value for the battle against cancers. Herein, we report an aggregation-induced emission (AIE) luminogen, namely TPPCN, with intense emission and efficient reactive oxygen species production for fluorescence imaging and killing cancer cells and Gram-positive bacteria. This work not only demonstrates the potential of AIE luminogens in comprehensive cancer treatments but also stimulates the enthusiasm of scientists to design more multifunctional AIE systems for both cancer and bacteria theranostics.

ROS-Activated Ratiometric Fluorescent Polymeric Nanoparticles for Self-Reporting Drug Delivery

Reactive oxygen species (ROS)-responsive theranostic nanomedicines have attracted wide interest in recent years because ROS stress is implicated in some pathological disorders such as inflammatory diseases and cancers. In this article, we report a kind of innovative ROS-responsive theranostic polymeric nanoparticles that are able to load hydrophobic drugs and to fluorescently self-report the in vitro or intracellular drug release under ROS triggering. The fluorescent nanoparticles were formed by amphiphilic block copolymers consisting of a poly(ethylene glycol) (PEG) segment and an oxidation-responsive hydrophobic block. The copolymers with different hydrophobic block lengths were synthesized by the atom transfer radical polymerization of a phenylboronic ester-containing acrylic monomer with a small fraction of a ROS-activatable 1,8-naphthalimide-based fluorescent monomer, using PEG-Br as the macroinitiator. The copolymer nanoparticles were stable in neutral phosphate buffer but degraded upon H₂O₂ triggering, with the degradation rate depending on the hydrophobic block length and the concentration of H₂O₂. The degradation of nanoparticles was accompanied by a colorimetric change of the fluorophore from blue to green, which affords the nanoparticles the ability to detecting H₂O₂ by a ratiometric fluorescent approach. Moreover, the nanoparticles could encapsulate doxorubicin (DOX) and the H₂O₂-triggered DOX release was well associated with the change in ratiometric fluorescence. Confocal laser scanning microscope results reveal that the fluorescent nanoparticles were internalized into A549 cells through the endocytosis pathway. The ROS-stimulated degradation of the nanoparticles and intracellular DOX release and the fate of the degraded polymers could be monitored by ratiometric fluorescent imaging. Finally, the naked nanoparticles and the degradation products are cytocompatible, whereas the DOX-loaded ones exhibit concentration-dependent cytotoxicity. Of importance, the stimulation with exogenous H₂O₂ or lipopolysaccharide enhanced obviously the cell-killing capability of the DOX-loaded nanoparticles because of the ROS-enhanced intracellular DOX release.

D-alanyl-D-alanine-Modified Gold Nanoparticles Form a Broad-Spectrum Sensor for Bacteria

Rationale: Rapid and facile detection of pathogenic bacteria is challenging due to the requirement of large-scale instruments and equipment in conventional methods. We utilize D-amino acid as molecules to selectively target bacteria because bacteria can incorporate DADA in its cell wall while mammalian cells or fungi cannot.

Methods: We show a broad-spectrum bacterial detection system based on D-amino acid-capped gold nanoparticles (AuNPs). AuNPs serve as the signal output that we can monitor without relying on any complex instruments.

Results: In the presence of bacteria, the AuNPs aggregate and the color of AuNPs changes from red to blue. This convenient color change can distinguish between Staphylococcus aureus (S. aureus) and methicillin-resistant Staphylococcus aureus (MRSA). This system can be applied for detection of ascites samples from patients.

Conclusion: These D-amino acid-modified AuNPs serve as a promising platform for rapid visual identification of pathogens in the clinic.

Highly Sensitive Naked-Eye Assay for Enterovirus 71 Detection Based on Catalytic Nanoparticle Aggregation and Immunomagnetic Amplification

Development of sensitive, convenient, and cost-effective virus detection product is of great significance to meet the growing demand of clinical diagnosis at the early stage of virus infection. Herein, a naked-eye readout of immunoassay by means of virion bridged catalase-mediated in situ reduction of gold ions and growth of nanoparticles, has been successfully proposed for rapid visual detection of Enterovirus 71 (EV71). Through tailoring the morphologies of the produced gold nanoparticles (GNPs) varying between dispersion and aggregation, a distinguishing color changing was ready for observation. This colorimetric detection assay, by further orchestrating the efficient magnetic enrichment and the high catalytic activity of enzyme, is managed to realize highly sensitive detection of EV71 virions with the limit of detection (LOD) down to 0.65 ng/mL. Our proposed method showed a much lower LOD value than the commercial ELISA for EV71 virion detection. Comparing to the current clinical gold standard polymerase chain reaction (PCR) method, our strategy provided the same diagnostic outcomes after testing real clinical samples. Besides, this strategy has no need of complicated sample pretreatment or expensive instruments. Our presented naked-eye immunoassay method holds a promising prospect for the early detection of virus-infectious disease especially in resource-constrained settings.

Digital Quantification of DNA Replication and Chromosome Segregation Enables Determination of Antimicrobial Susceptibility after only 15 Minutes of Antibiotic Exposure

Rapid antimicrobial susceptibility testing (AST) would decrease misuse and overuse of antibiotics. The "holy grail" of AST is a phenotype-based test that can be performed within a doctor visit. Such a test requires the ability to determine a pathogen's susceptibility after only a short antibiotic exposure. Herein, digital PCR (dPCR) was employed to test whether measuring DNA replication of the target pathogen through digital single-molecule counting would shorten the required time of antibiotic exposure. Partitioning bacterial chromosomal DNA into many small volumes during dPCR enabled AST results after short exposure times by 1) precise quantification and 2) a measurement of how antibiotics affect the states of macromolecular assembly of bacterial chromosomes. This digital AST (dAST) determined susceptibility of clinical isolates from urinary tract infections (UTIs) after 15 min of exposure for all four antibiotic classes relevant to UTIs. This work lays the foundation to develop a rapid, point-of-care AST and strengthen global antibiotic stewardship.

Label-Free Fluorescence Assay of S1 Nuclease and Hydroxyl Radicals Based on Water-Soluble Conjugated Polymers and WS₂ Nanosheets

We developed a new method for detecting S1 nuclease and hydroxyl radicals based on the use of water-soluble conjugated poly[9,9-bis(6,6-(N,N,N-trimethylammonium)-fluorene)-2,7-ylenevinylene-co-alt-2,5-dicyano-1,4-phenylene)] (PFVCN) and tungsten disulfide (WS₂) nanosheets. Cationic PFVCN is used as a signal reporter, and single-layer WS₂ is used as a quencher with a negatively charged surface. The ssDNA forms complexes with PFVCN due to much stronger electrostatic interactions between cationic PFVCN and anionic ssDNA, whereas PFVCN emits yellow fluorescence. When ssDNA is hydrolyzed by S1 nuclease or hydroxyl radicals into small fragments, the interactions between the fragmented DNA and PFVCN become weaker, resulting in PFVCN being adsorbed on the surface of WS₂ and the fluorescence being quenched through fluorescence resonance energy transfer. The new method based on PFVCN and WS₂ can sense S1 nuclease with a low detection limit of 5 × 10(-6) U/mL. Additionally, this method is cost-effective by using affordable WS₂ as an energy acceptor without the need for dye-labeled ssDNA. Furthermore, the method provides a new platform for the nuclease assay and reactive oxygen species, and provides promising applications for drug screening.

Transmutation of Personal Glucose Meters into Portable and Highly Sensitive Microbial Pathogen Detection Platform

Herein, for the first time, we presented a simple and general approach by using personal glucose meters (PGM) for portable and ultrasensitive detection of microbial pathogens. Upon addition of pathogenic bacteria, glucoamylase-quaternized magnetic nanoparticles (GA-QMNPS) conjugates were disrupted by the competitive multivalent interactions between bacteria and QMNPS, resulting in the release of GA. After magnetic separation, the free GA could catalyze the hydrolysis of amylose into glucose for quantitative readout by PGM. In such way, PGM was transmuted into a bacterial detection device and extremely low detection limits down to 20 cells mL(-1) was achieved. More importantly, QMNPS could inhibit the growth of the bacteria and destroy its cellular structure, which enabled bacteria detection and inhibition simultaneously. The simplicity, portability, sensitivity and low cost of presented work make it attractive for clinical applications.

A Luminogen with Aggregation-Induced Emission Characteristics for Wash-Free Bacterial Imaging, High-Throughput Antibiotics Screening and Bacterial Susceptibility Evaluation

A luminogen with aggregation-induced emission characteristics is reported for bacterial imaging and antibiotics screening studies. The luminogen can light up bacteria in a wash-free manner, which simplifies the imaging process and increases its accuracy in bacterial detection. It can also be applied to high-throughput screening of antibiotics and fast evaluation of bacterial susceptibility, giving reliable results in less than 5 h.

Conjugated Polythiophene for Rapid, Simple, and High-Throughput Screening of Antimicrobial Photosensitizers

The cationic conjugated poly[3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene hydrochloride] (PMNT) has been developed for high-throughput screening of photodynamic antimicrobial chemotherapy photosensitizers (PSs). The bacterial number can be detected quantitatively by PMNT via various fluorescence quenching efficiencies. The photosensitized inactivation of bacteria is not efficient with ineffective PSs, and thus the bacteria grow exponentially and can be coated tightly by PMNT through electrostatic and hydrophobic interactions, resulting in aggregates and fluorescence quenching of PMNT, whereas, conversely, effective PSs lead to original and strong fluorescence of PMNT. This new platform of high-throughput screening is promising for discovering new PSs.

Proton Nuclear Magnetic Resonance Spectroscopy as a Technique for Gentamicin Drug Susceptibility Studies with Escherichia coli ATCC 25922

Antimicrobial drug susceptibility tests involving multiple time-consuming steps are still used as reference methods. Today, there is a need for the development of new automated instruments that can provide faster results and reduce operating time, reagent costs, and labor requirements. Nuclear magnetic resonance (NMR) spectroscopy meets those requirements. The metabolism and antimicrobial susceptibility of Escherichia coli ATCC 25922 in the presence of gentamicin have been analyzed using NMR and compared with a reference method. Direct incubation of the bacteria (with and without gentamicin) into the NMR tube has also been performed, and differences in the NMR spectra were obtained. The MIC, determined by the reference method found in this study, would correspond with the termination of the bacterial metabolism observed with NMR. Experiments carried out directly into the NMR tube enabled the development of antimicrobial drug susceptibility tests to assess the effectiveness of the antibiotic. NMR is an objective and reproducible method for showing the effects of a drug on the subject bacterium and can emerge as an excellent tool for studying bacterial activity in the presence of different antibiotic concentrations.

Guanidinium-pendant oligofluorene for rapid and specific identification of antibiotics with membrane-disrupting ability

A new method based on fluorescence resonance energy transfer was developed for specifically screening membrane-disrupting antibiotics.

Amphiphilic star copolymer-based bimodal fluorogenic/magnetic resonance probes for concomitant bacteria detection and inhibition

Four-arm star-shaped copolymers, TPE-star-P(DMA-co-BMA-co-Gd), containing TPE cores with an aggregation-induced emission (AIE) feature, a T 1 -type magnetic resonance (MR) contrast agent, and amphiphilic cationic arms, are synthesized. By taking advantage of non-covalent interactions between star copolymers and bacteria surfaces, bimodal fluorometric/MR detection and concomitant inhibition of both Gram-positive and Gram-negative bacteria strains in aqueous media are explored.

Water-soluble conjugated polymer as a platform for adenosine deaminase sensing based on fluorescence resonance energy transfer technique

We report a new biosensor for adenosine deaminase (ADA) sensing based on water-soluble conjugated poly(9,9-bis(6'-N,N,N-trimethylammonium)hexyl)fluorine phenylene (PFP) and fluorescence resonance energy transfer technique. In this biosensor, PFP, DNAc-FI labeled with fluorescein (FAM), and ethidium bromide (EB) were used as the fluorescence energy donor, resonance gate, and the final fluorescence energy acceptor, respectively. In the absence of ADA, the adenosine aptamer forms a hairpin-like conformation with adenosine, which is far from its complementary single-stranded DNA (DNAc-FI). When PFP is excited at 380 nm, fluorescein emits strong green fluorescence via one-step FRET while EB has no fluorescence. After addition of ADA, adenosine is hydrolyzed to inosine and then double-stranded DNA (dsDNA) is formed between the aptamer and DNAc-FI, followed by EB intercalating into dsDNA. Once PFP is excited, EB will emit strong yellow fluorescence after two-step FRET from PFP to fluorescein and from fluorescein to EB. The sensitive ADA detection then is realized with a low detection limit of 0.5 U/L by measuring the FRET ratio of EB to fluorescein. Most importantly, the assay is accomplished homogeneously in 25 min without further treatments, which is much more simple and rapid than that reported in literature. Hence, this method demonstrates the sensitive, cost-effective, and rapid detection of ADA activity. It also opens an opportunity for designing promising sensors for other enzymes.

Rational design and synthesis of covalent organic polymers with hollow structure and excellent antibacterial efficacy

A covalent organic polymer with hollow structure (COP-H) has been synthesizedviaSonogashira coupling from the precursors containing positive charge.

A single-step emulsion approach to prepare fluorescent nanoscale coordination polymers for bioimaging

A facile and convenient microemulsion method is demonstrated to prepare fluorescent nanoscale coordination polymers. And the nanoscale coordination polymers exhibited bright blue fluorescence and good biocompatibility, thus giving them the ability for bioimaging.

Macromolecular self-assembly and nanotechnology in China

Macromolecular self-assembly refers to the assembly of synthetic polymers, biomacromolecules and supra-molecular polymers. Through macromolecular self-assembly, the fabrication of ordered structures at different scales, the control of the dynamic assembly process and the integrations of advanced functions can be realized. Macromolecular self-assembly and nanotechnology research in China has developed rapidly, from the early periods of follow-up at low to high level and progress into a stage of innovation and creation. This review selects some representative progresses achieved recently, aiming to reflect the current status of macromolecular self-assembly and nanotechnology research in China.

Dual colorimetric and luminescent assay for dipicolinate, a biomarker of bacterial spores

A binary mixture of Tb(3+) and pyrocatechol violet (PV) forms a 1 : 1 Tb(3+)/PV complex that can be used in a dye displacement assay. Addition of dipicolinate (DPA) to the Tb(3+)/DPA complex simultaneously produces a PV color change from blue to yellow and luminescence emission from the newly formed Tb(3+)/DPA complex.

Magnetophoretic chromatography for the detection of pathogenic bacteria with the naked eye

A facile and sensitive analytical method that uses gold-coated magnetic nanoparticle clusters (Au/MNCs) and magnetophoretic chromatography with a precision pipet has been developed for the detection of Salmonella bacteria. Antibody-conjugated Au/MNCs are used to capture the Salmonella bacteria in milk and are then separated from the milk by applying an external magnetic field. The Salmonella-containing solution is sucked into a precision pipet tip to which a viscous polymer solution is then added. Once the magnetophoretic chromatography process has been carried out for 10 min, the presence of 100 cfu/mL Salmonella bacteria can be detected with the naked eye because the bacteria have become concentrated at the narrow pipet tip. The performance of this method was evaluated by using dynamic light scattering and light absorption spectroscopy.

Synthesis of a new conjugated polymer for DNA alkylation and gene regulation

A new polyfluorene derivative containing pendent alkylating chlorambucil (PFP-Cbl) was synthesized and characterized. Under direct incubation with DNA in vitro, PFP-Cbl could undergo an efficient DNA alkylating reaction and induce DNA cross-linking. In vitro transcription and translation experiment exhibited that the PFP-Cbl significantly down-regulated the gene expression of luciferase reporter plasmid. The down-regulation of gene expression was also verified through the transfection experiment of p-EGFP plasmid, which showed decreased green fluorescent protein (GFP) in cells. Meanwhile, the self-luminous property of PFP-Cbl could make it able to trace the internalized PFP-Cbl and plasmid complexes resulted from cross-linking in cells by fluorescent microscopy. Combining the features of alkylating function, multivalent binding sites, and fluorescent characteristics, PFP-Cbl provides a new insight in the area of gene regulation and extends the new applications of conjugated polymers (CPs).

A facile and sensitive detection of pathogenic bacteria using magnetic nanoparticles and optical nanocrystal probes

We report a facile and sensitive analytical method for the detection of pathogenic bacteria. Salmonella bacteria in milk were captured by antibody-conjugated magnetic nanoparticles (MNPs) and separated from analyte samples by applying an external magnetic field. The MNP-Salmonella complexes were re-dispersed in a buffer solution then exposed to antibody-immobilized TiO(2) nanocrystals (TNs), which absorb UV light. After magnetically separating the MNP-Salmonella-TN complexes from solution, the UV-Vis absorption spectrum of the unbound TN solution was obtained. Because the light absorption intensity was reversely proportional to the Salmonella concentration, the assay exhibited high sensitivity toward low concentrations of Salmonella bacteria. The detection limit of Salmonella in milk was found to be more than 100 cfu mL(-1).

Deep-red fluorescent imaging probe for bacteria

A versatile deep-red fluorescent imaging probe is described that is comprised of a bis(zinc(II)-dipicolylamine) targeting unit covalently attached to a pentamethine carbocyanine fluorophore with Cy5-like spectroscopic properties. A titration assay based on fluorescence resonance energy transfer is used to prove that the probe selectively associates with anionic vesicle membranes whose composition mimics bacterial cell membranes. Whole-body optical imaging experiments show that the probe associates with the surfaces of both Gram-positive and Gram-negative bacteria cells, and it can target the site of bacterial infection in a living mouse. In vivo accumulation at the infection site and subsequent clearance occurs more quickly than a structurally related near-infrared bis(zinc(II)-dipicolylamine) probe. The fact that the same deep-red probe molecule can be used for spectroscopic assays, cell microscopy, and in vivo imaging studies, is an important and attractive technical feature.