Synthesis of Monolayer-Patched Graphene from Glucose

In situ synergistic reduced graphene oxide-boron carbon nitride nanosheet heterostructures for high-performance fabric-based supercapacitors

We develop a new type of heterostructure nanocomposite made of reduced graphene oxide-boron carbon nitride nanosheets (rGO-BCN) by B-C covalent bonds. The rGO-BCN nanocomposite delivers a large specific surface and excellent electrochemical properties, and is then constructed into flexible fabric-based high-performance supercapacitor electrodes based on the microfluidic electrospinning technology.

Sequential co-reduction of nitrate and carbon dioxide enables selective urea electrosynthesis

Despite the recent achievements in urea electrosynthesis from co-reduction of nitrogen wastes (such as NO3-) and CO2, the product selectivity remains fairly mediocre due to the competing nature of the two parallel reduction reactions. Here we report a catalyst design that affords high selectivity to urea by sequentially reducing NO3- and CO2 at a dynamic catalytic centre, which not only alleviates the competition issue but also facilitates C-N coupling. We exemplify this strategy on a nitrogen-doped carbon catalyst, where a spontaneous switch between NO3- and CO2 reduction paths is enabled by reversible hydrogenation on the nitrogen functional groups. A high urea yield rate of 596.1 µg mg-1 h-1 with a promising Faradaic efficiency of 62% is obtained. These findings, rationalized by in situ spectroscopic techniques and theoretical calculations, are rooted in the proton-involved dynamic catalyst evolution that mitigates overwhelming reduction of reactants and thereby minimizes the formation of side products.

Comparative catalytic reduction and degradation with biodegradable sodium alginate based nanocomposite: Zinc oxide/N-doped carbon nitride/sodium alginate

Sodium alginate (SA) is a biodegradable macromolecule which is used to synthesize nanocomposites and their further use as catalysis. Zinc oxide (ZnO) and nitrogen doped carbon nitride (ND-C3N4) nanoparticles are prepared using solvothermal and hydrothermal methods, respectively. ZnO/ND-C3N4/SA nanocomposites are successfully synthesized by employing in-situ polymerization. The presence of essential functional groups is confirmed by Fourier transform infrared (FTIR) spectroscopic analysis. Controlled spherical morphology for ZnO nanoparticles, with an average diameter of ∼52 nm, is shown by Scanning electron microscopic (SEM) analysis, while rice-like grain structure with an average grain size ∼62 nm is exhibited by ND-C3N4 nanoparticles. The presence of required elements is confirmed by Energy dispersive X-ray spectroscopic (EDX) analysis. The crystalline nature of nanocomposites is verified by X-ray diffraction spectroscopic (XRD) analysis. The investigation of the catalytic efficiency for degradation and reduction of various organic dyes is carried out on nanoparticles and nanocomposites. Thorough examination and comparison of parameters, such as apparent rate constant (kapp), reduction time, percentage reduction, reduced concentration and half-life, are conducted for all substrates. The nanocomposites show greater efficiency than nanoparticles in both reactions: catalytic reduction and catalytic degradation.

Carbon Nanosheets Infused with Gold Nanoparticles as an Ultrasensitive Nose for Electrochemical Arsenic Sensing

Herein, we introduce an eco-friendly electrochemical sensor based on melamine-enriched nitrogen-doped carbon nanosheets decorated with gold nanoparticles (Au-CNSm) for arsenic sensing. An extremely facile, low-toxicity, biocompatible, and affordable hydrothermal technique was adopted for the synthesis of the Au-CNSm nanocomposite. The Au-CNSm-integrated sensing platform was optimized for electrode composition by cyclic voltammetry (CV). Owing to the synergistic effects of melamine-enriched carbon nanosheets (CNSm) and gold nanoparticles (AuNPs), the anodic peak current increased in the Au-CNSm-modified sensing electrode as compared to the CNSm-decorated platform. A wide linear range of 0.0001-100 μM and a low detection limit of 0.0001 μM were obtained. The visual signals can be measured at a very minute concentration of 0.0001 μM (0.1 ppb) on a screen-printed carbon electrode (SPCE) modified with Au-CNSm. Hence, this electrode system clearly outperformed the previously reported studies in terms of linear range, limit of detection (LOD), and electrocatalytic activity for arsenic sensing. Interestingly, the fabricated biosensor can be developed as a point-of-care device for real-time environmental monitoring for public safety. Henceforth, owing to exceptional attributes such as portability, selectivity, and sensitivity, this device offers great promise in modeling a revolutionary new class of electrochemical sensing platforms for an ultrasensitive and reliable detection strategy for arsenite (As(III)).

Functional Carbon from Nature: Biomass-Derived Carbon Materials and the Recent Progress of Their Applications

Biomass is considered as a promising source to fabricate functional carbon materials for its sustainability, low cost, and high carbon content. Biomass-derived-carbon materials (BCMs) have been a thriving research field. Novel structures, diverse synthesis methods, and versatile applications of BCMs have been reported. However, there has been no recent review of the numerous studies of different aspects of BCMs-related research. Therefore, this paper presents a comprehensive review that summarizes the progress of BCMs related research. Herein, typical types of biomass used to prepare BCMs are introduced. Variable structures of BCMs are summarized as the performance and properties of BCMs are closely related to their structures. Representative synthesis strategies, including both their merits and drawbacks are reviewed comprehensively. Moreover, the influence of synthetic conditions on the structure of as-prepared carbon products is discussed, providing important information for the rational design of the fabrication process of BCMs. Recent progress in versatile applications of BCMs based on their morphologies and physicochemical properties is reported. Finally, the remaining challenges of BCMs, are highlighted. Overall, this review provides a valuable overview of current knowledge and recent progress of BCMs, and it outlines directions for future research development of BCMs.

Permanganate activation by glucose-derived carbonaceous materials for highly efficient degradation of phenol and p-nitrophenol: Formation of hydroxyl radicals and multiple roles of carbonaceous materials

Owing to its inertness toward refractory organic pollutants and the release of Mn²⁺, the use of permanganate was limited in soil and groundwater remediation. The present study proposed an improvement strategy based on glucose-derived carbonaceous materials, which enhanced the potential of permanganate degrading organic pollutants. The glucose-derived carbonaceous material with 1000 °C charring temperature was named C1000, which was exploited in activating KMnO₄ for the elimination of refractory organic contaminants. The addition of C1000 in the KMnO₄ system triggered the degradation of refractory p-nitrophenol and quicken phenol degradation. Unlike the detection of Mn(III) species in a solo KMnO₄ system, the presence of C1000 facilitated the formation of ^•OH in the KMnO₄ system, which was confirmed by the use of quenchers such as methanol, benzoic acid, tertiary butanol, and carbonate. Additionally, the glucose-derived carbonaceous material played multiple roles in improving the performance of permanganate, including the enrichment of organic pollutants, donation of electrons to permanganate, and acting as an electron shuttle to facilitate the oxidation of organic pollutants by permanganate. The study's novel findings have the potential to expand the use of permanganate in the remediation of organic pollutants.

Graphitized Cu-β-cyclodextrin polymer driving an efficient dual-reaction-center Fenton-like process by utilizing electrons of pollutants for water purification

Excessive consumption of energy and resources is a major challenge in wastewater treatment. Here, a novel heterogeneous Fenton-like catalyst consisting of Cu-doped graphene-like catalysts (Cu-GCD NSs) was first synthesized by an enhanced carbothermal reduction of β-cyclodextrin (β-CD). The catalyst exhibits excellent Fenton-like catalytic activity for the degradation of various pollutants under neutral conditions, accompanied by low H₂O₂ consumption. The results of structural characterization and theoretical calculations confirmed that the dual reaction centers (DRCs) were constructed on Cu-GCD NSs surface through C-O-Cu bonds supported on zero-valent copper species, which play a significant role in the high-performance Fenton-like reaction. The pollutants that served as electron donors were decomposed in the electron-poor carbon centers, whereas H₂O₂ and dissolved oxygen obtained these electrons in the electron-rich Cu centers through C-O-Cu bonds, thereby producing more active species. This study demonstrates that the electrons of pollutants can be efficiently utilized in Fenton-like reactions by DRCs on the catalyst surface, which provides an effective strategy to improve Fenton-like reactivity and reduce H₂O₂ consumption.

Inter-Metal Interaction with a Threshold Effect in NiCu Dual-Atom Catalysts for CO2 Electroreduction

Dual-atom catalysts (DACs) have become an emerging platform to provide more flexible active sites for electrocatalytic reactions with multi-electron/proton transfer, such as the CO₂  reduction reaction (CRR). However, the introduction of asymmetric dual-atom sites causes complexity in structure, leaving an incomprehensive understanding of the inter-metal interaction and catalytic mechanism. Taking NiCu DACs as an example, herein, a more rational structural model is proposed, and the distance-dependent inter-metal interaction is investigated by combining theoretical simulations and experiments, including density functional theory computation, aberration-corrected transmission electron microscopy, synchrotron-based X-ray absorption fine structure, and Monte Carlo experiments. A distance threshold around 5.3 Å between adjacent NiN₄  and CuN₄  moieties is revealed to trigger effective electronic regulation and boost CRR performance on both selectivity and activity. A universal macro-descriptor rigorously correlating the inter-metal distance and intrinsic material features (e.g., metal loading and thickness) is established to guide the rational design and synthesis of advanced DACs. This study highlights the significance of identifying the inter-metal interaction in DACs, and helps bridge the gap between theoretical study and experimental synthesis of atomically dispersed catalysts with highly correlated active sites.

Covalently Assembled Black Phosphorus/Conductive C3N4 Hybrid Material for Flexible Supercapacitors Exhibiting a Superlong 30,000 Cycle Durability

Black phosphorus (BP) has been demonstrated as a promising electrode material for supercapacitors. Currently, the main limitation of its practical application is the low electrical conductivity and poor structure stability. Hence, BP-based supercapacitors usually severely suffer from low capacitance and poor cycling stability. Herein, a chemically bridged BP/conductive g-C₃N₄ (BP/c-C₃N₄) hybrid is developed via a facile ball-milling method. Covalent P-C bonds are generated through the ball-milling process, effectively preventing the structural distortion of BP induced by ion transport and diffusion. In addition, the overall electrical conductivity is significantly enhanced owing to the sufficient coupling between BP and highly conductive c-C₃N₄. Moreover, the imbalanced charge distribution around the C atom can induce the generation of a local electric field, facilitating the charge transfer behavior of the electrode material. As a result, the BP/c-C₃N₄-20:1 flexible supercapacitor (FSC) exhibits an outstanding volumetric capacitance of 42.1 F/cm³ at 0.005 V/s, a high energy density of 5.85 mW h/cm³, and a maximum power density of 15.4 W/cm³. More importantly, the device delivers excellent cycling stability with no capacitive loss after 30,000 cycles.

Manipulating K-Storage Mechanism of Soft Carbon via Molecular Design-Driven Structure Transformation

The emerging potassium-ion batteries (PIBs) have been placing stratospheric expectations for realizing grid-scale electrochemical storage of renewable energy. However, the unsatisfactory K-storage of PIB anode materials, especially promising carbonaceous materials, significantly limited the development of PIBs. Here, a molecular design strategy was proposed to realize controllable structure transformation of soft carbon (SC) materials for enhanced K-storage performance. The optimized SC-PCN material delivered a high reversible K-storage capacity of 838 mAh/g at 50 mA/g, outstanding rate capability (213 mAh/g at 1000 mA/g), and excellent long-term cycling performance (301 mAh/g maintained after 300 cycles at 500 mA/g), superior to most previously reported carbon-based PIB anodes materials. Reaction kinetic analysis revealed that the proposed molecular design strategy can achieve the transformation from a surface capacitive-dominated mechanism to a capacitive-diffusion hybrid mechanism for SC-PCN, benefiting from its unique microstructures with highly defective surface generated via the synergistic effect from template removal, N doping, and surface reconstruction. The optimal hybrid K-storage mechanism should be responsible for the excellent K-storage properties of the prepared SC-PCN.

New Folding 2D-Layered Nitro-Oxygenated Carbon Containing Ultra High-Loading Copper Single Atoms

The discoveries of 2D nanomaterials have made huge impacts on the scientific community. Their unique properties unlock new technologies and bring significant advances to diverse applications. Herein, an unprecedented 2D-stacked material consisting of copper (Cu) on nitro-oxygenated carbon is disclosed. Unlike any known 2D stacked structures that are usually constructed by stacking of separate 2D layers, this material forms a continuously folded 2D-stacked structure. Interestingly, advanced characterizations indicate that Cu atoms inside the structure are in an atomically-dispersed form with extraordinarily high Cu loading up to 15.9 ± 1.2 wt.%, which is among the highest reported metal loading for single-atom catalysts on 2D supports. Facile exfoliation results in thin 2D nanosheets that maximize the exposure of the unique active sites (two neighboring Cu single atoms), leading to impressive catalytic performance, as demonstrated in the electrochemical oxygen reduction reaction.

Constructing Interfacial Boron‐Nitrogen Moieties in Turbostratic Carbon for Electrochemical Hydrogen Peroxide Production

The electrochemical oxygen reduction reaction (ORR) provides a green route for decentralized H₂O₂ synthesis, where a structure–selectivity relationship is pivotal for the control of a highly selective and active two‐electron pathway. Here, we report the fabrication of a boron and nitrogen co‐doped turbostratic carbon catalyst with tunable B−N−C configurations (CNB‐ZIL) by the assistance of a zwitterionic liquid (ZIL) for electrochemical hydrogen peroxide production. Combined spectroscopic analysis reveals a fine tailored B−N moiety in CNB‐ZIL, where interfacial B−N species in a homogeneous distribution tend to segregate into hexagonal boron nitride domains at higher pyrolysis temperatures. Based on the experimental observations, a correlation between the interfacial B−N moieties and HO₂⁻ selectivity is established. The CNB‐ZIL electrocatalysts with optimal interfacial B−N moieties exhibit a high HO₂⁻ selectivity with small overpotentials in alkaline media, giving a HO₂⁻ yield of ≈1787 mmol g_catalyst⁻¹ h⁻¹ at −1.4 V in a flow‐cell reactor.

Upcycling of Plastic Wastes and Biomass for Sustainable Graphitic Carbon Production: A Critical Review

Upcycling of waste plastics diverts plastics from landfill, which helps in reducing greenhouse gas emissions. Graphitic carbon is an interesting material with a wide range of applications in electronics, energy storage, fuel cells, and even as advanced fillers for polymer composites. It is a very strong and highly conductive material consisting of weakly bound graphene layers arranged in a hexagonal structure. There are different ways of synthesizing graphitic carbons, of which the co-pyrolysis of biomass and plastic wastes is a promising approach for large-scale production. Highly graphitized carbon with surface areas in the range of 201 m²/g was produced from the co-pyrolysis of polyethylene and pinewood at 600 °C. Similarly, porous carbon having a superior discharge capacity (290 mAh/g) was developed from the co-pyrolysis of sugar cane and plastic polymers with catalysts. The addition of plastic wastes including polyethylene and high-density polyethylene to the pyrolysis of biomass tends to increase the surface area and improve the discharge capacity of the produced graphitic carbons. Likewise, temperature plays an important role in enhancing the carbon content and thereby the quality of the graphitic carbon during the co-pyrolysis process. The application of metal catalysts can reduce the graphitization temperature while at the same time improve the quality of the graphitic carbon by increasing the carbon contents. This work reports some typical graphitic carbon preparation methods from the co-pyrolysis of biomass and plastic wastes for the first time including thermochemical methods, exfoliation methods, template-based production methods, and salt-based methods. The factors affecting the graphitic char quality during the conversion processes are reviewed critically. Moreover, the current state-of-the-art characterization technologies such as Raman, scanning electron microscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy are discussed in detail, and finally, an overview on the applications, scalability, and future trends of graphitic-like carbons is highlighted.

Single-atom palladium anchored N-doped carbon towards oxygen electrocatalysis for rechargeable Zn-air batteries

Herein, an atomically dispersed palladium catalyst on a hierarchical porous structure of N-doped carbon (Pd₁/N-C) is prepared using a facile freeze-drying-assisted strategy. Freeze-drying methods not only suppress the aggregation of Pd atoms but also successfully produce abundant nanopores. HAADF-STEM confirms that Pd single atoms are uniformly anchored on the N-C surface. The Pd₁/N-C electrocatalyst enhances the ORR and OER activity and durability compared to N-C and Pd-NPs/N-C. Rechargeable Zn-air batteries (ZABs) based on novel Pd₁/N-C exhibit a peak power density of 113.7 mW cm^-2 and maintain a voltage efficiency of 64.0% after 495 cycles at a discharge current density of 5 mA cm^-2. Besides, two ZABs in series can supply an LED light for at least 170 h.

Defect-Engineered Co3 O4 @Nitrogen-Deficient Graphitic Carbon Nitride as an Efficient Bifunctional Electrocatalyst for High-Performance Metal-Air Batteries

The ability to craft high-efficiency and non-precious bifunctional oxygen catalysts opens an enticing avenue for the real-world implementation of metal-air batteries (MABs). Herein, Co₃ O₄ encapsulated within nitrogen defect-rich g-C₃ N₄ (denoted Co₃ O₄ @ND-CN) as a bifunctional oxygen catalyst for MABs is prepared by graphitizing the zeolitic imidazolate framework (ZIF)-67@ND-CN. Co₃ O₄ @ND-CN possesses superb bifunctional catalytic performance, which facilitates the construction of high-performance MABs. Concretely, the rechargeable zinc-air battery based on Co₃ O₄ @ND-CN shows a superior round-trip efficiency of ≈60% with long-term durability (over 340 cycles), exceeding the battery with the state-of-the-art noble metals. The corresponding lithium-oxygen battery using Co₃ O₄ @ND-CN exhibits an excellent maximum discharge/charge capacity (9838.8/9657.6 mAh g^-1 ), an impressive discharge/charge overpotential (1.14 V/0.18 V), and outstanding cycling stability. Such compelling electrocatalytic processes and device performances of Co₃ O₄ @ND-CN originate from concurrent compositional (i.e., defect-engineering) and structural (i.e., wrinkled morphology with abundant porosity) elaboration as well as the well-defined synergy between Co₃ O₄ and ND-CN, which produce an advantageous surface electronic environment corroborated by theoretical modeling. By extension, a rich diversity of other metal oxides@ND-CN with adjustable defects, architecture, and enhanced activities may be rationally designed and crafted for both scientific research on catalytic properties and technological development in renewable energy conversion and storage systems.

Green syntheses of graphene and its applications in internet of things (IoT)-a status review

Internet of Things (IoT) is a trending technological field that converts any physical object into a communicable smarter one by converging the physical world with the digital world. This innovative technology connects the device to the internet and provides a platform to collect real-time data, cloud storage, and analyze the collected data to trigger smart actions from a remote location via remote notifications, etc. Because of its wide-ranging applications, this technology can be integrated into almost all the industries. Another trending field with tremendous opportunities is Nanotechnology, which provides many benefits in several areas of life, and helps to improve many technological and industrial sectors. So, integration of IoT and Nanotechnology can bring about the very important field of Internet of Nanothings (IoNT), which can re-shape the communication industry. For that, data (collected from trillions of nanosensors, connected to billions of devices) would be the 'ultimate truth', which could be generated from highly efficient nanosensors, fabricated from various novel nanomaterials, one of which is graphene, the so-called 'wonder material' of the 21st century. Therefore, graphene-assisted IoT/IoNT platforms may revolutionize the communication technologies around the globe. In this article, a status review of the smart applications of graphene in the IoT sector is presented. Firstly, various green synthesis of graphene for sustainable development is elucidated, followed by its applications in various nanosensors, detectors, actuators, memory, and nano-communication devices. Also, the future market prospects are discussed to converge various emerging concepts like machine learning, fog/edge computing, artificial intelligence, big data, and blockchain, with the graphene-assisted IoT field to bring about the concept of 'all-round connectivity in every sphere possible'.

Cobalt-Containing Nitrogen-Doped Carbon Materials Derived from Saccharides as Efficient Electrocatalysts for Oxygen Reduction Reaction

The development of non-precious metal electrocatalysts towards oxygen reduction reaction (ORR) is crucial for the commercialisation of polymer electrolyte fuel cells. In this work, cobalt-containing nitrogen-doped porous carbon materials were prepared by a pyrolysis of mixtures of saccharides, cobalt nitrate and dicyandiamide, which acts as a precursor for reactive carbon nitride template and a nitrogen source. The rotating disk electrode (RDE) experiments in 0.1 M KOH solution showed that the glucose-derived material with optimised cobalt content had excellent ORR activity, which was comparable to that of 20 wt % Pt/C catalyst. In addition, the catalyst exhibited high tolerance to methanol, good stability in short-time potential cycling test and low peroxide yield. The materials derived from xylan, xylose and cyclodextrin displayed similar activities, indicating that various saccharides can be used as inexpensive and sustainable precursors to synthesise active catalyst materials for anion exchange membrane fuel cells.

Vanadium nitride nanoparticle decorated N-doped carbon nanotube/N-doped carbon nanosheet hybrids via a C3N4 self-sacrificing method for electrochemical capacitors

Owing to the wide negative potential window (∼1.2 V) along with high specific capacitance (1340 F g-1) in alkaline electrolyte, vanadium nitride (VN) has been served as promising negative supercapacitor electrode material. However, VN is easy to dissolve during cycling process and shows low capacitance retainability. Herein, a hybrid electrode (marked as VN/NCNT/NCN), featuring VN nanoparticles and N-doped carbon nanotube inserted in N-doped carbon nanosheets, has been fabricated with a facile C3N4 self-sacrificing method. The porous structure and high conductive carbon skeleton, as well as the uniform distribution of VN nanoparticles give VN/NCNT/NCN a great amount of active site and fulfill excellent electrochemical performance for VN/NCNT/NCN-based electrode. The as-fabricated hybrid electrode exhibits a maximum specific capacitance of 232.9 F g-1 at 1 A g-1. Moreover, the cycling performance has been greatly improved and the specific capacitance remains 91% after 5000 cycles.

Tungsten Nanoparticles Accelerate Polysulfides Conversion: A Viable Route toward Stable Room-Temperature Sodium-Sulfur Batteries

Room-temperature sodium-sulfur (RT Na-S) batteries are arousing great interest in recent years. Their practical applications, however, are hindered by several intrinsic problems, such as the sluggish kinetic, shuttle effect, and the incomplete conversion of sodium polysulfides (NaPSs). Here a sulfur host material that is based on tungsten nanoparticles embedded in nitrogen-doped graphene is reported. The incorporation of tungsten nanoparticles significantly accelerates the polysulfides conversion (especially the reduction of Na₂ S₄ to Na₂ S, which contributes to 75% of the full capacity) and completely suppresses the shuttle effect, en route to a fully reversible reaction of NaPSs. With a host weight ratio of only 9.1% (about 3-6 times lower than that in recent reports), the cathode shows unprecedented electrochemical performances even at high sulfur mass loadings. The experimental findings, which are corroborated by the first-principles calculations, highlight the so far unexplored role of tungsten nanoparticles in sulfur hosts, thus pointing to a viable route toward stable Na-S batteries at room temperatures.

Green synthetic nitrogen-doped graphene quantum dot fluorescent probe for the highly sensitive and selective detection of tetracycline in food samples

Tetracycline (TC) is a broad-spectrum antibiotic. When humans consume too much food containing tetracycline residues, it can be a serious health hazard. Therefore, it is essential to develop a strategy to detect TC. In this study, we prepared light blue-green luminescent nitrogen-doped graphene quantum dots (N-GQDs) by a hydrothermal method using the natural products potato straight-chain starch and urea as precursors; the fluorescence quantum yield of the prepared N-GQDs was 5.2%. We investigated the detection of tetracycline (TC) by this N-GQD fluorescent sensor based on the internal filtration effect (IFE) of TC on N-GQDs. The reaction is green, simple and no other contaminating products are present. A good linear relationship was established between the relative fluorescence intensity ratio of the system and the logarithm of the TC concentration of 2.5 × 10⁻¹⁰ to 5 × 10⁻⁶ M (R² = 0.9930), with a detection limit of 9.735 × 10⁻¹³ M. The method has been used to analyze TC in three real food samples (whole milk, skim milk, honey) with low detection limits (3.750 × 10⁻¹¹ to 2.075 × 10⁻⁹ M), wide linear range, and satisfactory recoveries of 93.80–109.20% were obtained. In conclusion, the proposed method is a green, rapid, highly sensitive and selective method for the detection of tetracycline in real food samples, demonstrating the potential application of N-GQDs in food detection.

Tetracycline (TC) is a broad-spectrum antibiotic.

A Review on Graphene Based Materials and Their Antimicrobial Properties

Graphene-based materials are found as excellent resources and employed as efficient anti-microbial agents, and they have been receiving significant attention from scientists and researchers in this regard. By giving special attention to recent applications of graphene-based materials, the current review is dedicated to unveiling the antimicrobial properties of graphene and its hybrid composites and their preparation methods. Different factors like the number of layers, concentration, size, and shape of the antibacterial activity are thoroughly discussed. Graphene-based materials could damage the bacteria physically by directly contacting the cell membrane or wrapping the bacterial cell. It can also chemically react to bacteria through oxidative stress and charge transfer mechanisms. This review explains such mechanisms thoroughly and summarizes the antibacterial applications (wound bandages, coatings, food packaging, etc.) of graphene and its hybrid materials.

Monodisperse Molybdenum Nanoparticles as Highly Efficient Electrocatalysts for Li-S Batteries

Lithium-sulfur (Li-S) batteries have attracted widespread attention due to their high theoretical energy density. However, their practical application is still hindered by the shuttle effect and the sluggish conversion of lithium polysulfides (LiPSs). Herein, monodisperse molybdenum (Mo) nanoparticles embedded onto nitrogen-doped graphene (Mo@N-G) were developed and used as a highly efficient electrocatalyst to enhance LiPS conversion. The weight ratio of the electrocatalyst in the catalyst/sulfur cathode is only 9%. The unfilled d orbitals of oxidized Mo can attract the electrons of LiPS anions and form Mo-S bonds during the electrochemical process, thus facilitating fast conversion of LiPSs. Li-S batteries based on the Mo@N-G/S cathode can exhibit excellent rate performance, large capacity, and superior cycling stability. Moreover, Mo@N-G also plays an important role in room-temperature quasi-solid-state Li-S batteries. These interesting findings suggest the great potential of Mo nanoparticles in building high-performance Li-S batteries.

A Review of Graphene: Material Synthesis from Biomass Sources

Single-atom-thick graphene is a particularly interesting material in basic research and applications owing to its remarkable electronic, mechanical, chemical, thermal, and optical properties. This leads to its potential use in a multitude of applications for improved energy storage (capacitors, batteries, and fuel cells), energy generation, biomedical, sensors or even as an advanced membrane material for separations. This paper provided an overview of research in graphene, in the area of synthesis from various sources specially from biomass, advanced characterization techniques, properties, and application. Finally, some challenges and future perspectives of graphene are also discussed.

Selective oxidation of alcohols by graphene-like carbon with electrophilic oxygen and integrated pyridinic nitrogen active sites

The selective oxidations of alcohols into corresponding aldehydes or ketones are essential reactions for organic synthesis. The development of facile, green and cost-effective protocols to accomplish selective oxidation is highly attractive. Here, we present the selective oxidation of alcohols using peroxymonosulfate (PMS) oxidants with N-doped graphene-like carbon (NG) synthesized via a metal-free approach without producing a large amount of hazardous wastes. In the tested selective oxidation reaction, over 96% of benzyl alcohol (BzOH) was converted into benzaldehyde (BzH) with high selectivity under mild conditions. The synthesized NG catalyst contains abundant electrophilic oxygen species, serving as the major active sites for the generation of reactive radicals from PMS to enable the selective oxidation of BzOH in the radical pathway. Besides, non-radical oxidation of BzOH occurs via the electron transfer through the surface coordinated complex, dominantly upon the N species. Particularly, the configuration of integrated pyridinic N is possible to create active domains for BzOH oxidation with activated PMS. This work opens a new avenue to convert metal-free raw materials into effectively functionalized carbon materials, coupled with their potential applications in the selective oxidation of alcohols.

Dual Inorganic Sacrificial Template Synthesis of Hierarchically Porous Carbon with Specific N Sites for Efficient Oxygen Reduction

It is still a challenge to achieve efficiently controlled preparation of functional oxygen reduction reaction (ORR) carbon electrocatalysts with multi-preferred structures (hierarchically porous networks and specific carbon-nitrogen bonds) from carbohydrate-containing small molecules via simple one-step pyrolysis. Based on the step-by-step spontaneous gas-foaming strategy, we successfully prepare 3D hierarchically porous networks with tunable N sites (N_P/N_G ≈ 1:1) by pyrolyzing diverse carbohydrates (glucose, maltose, and cyclodextrin) using nonmetal-metal dual inorganic sacrificial templates. In situ evaporation templates can simplify the procedure of the experiments and avoid the active site loss compared with traditional hard templates. Crucially, dual inorganic sacrificial templates can induce abundant defects and microscopic pore structures (the specific surface area increased from 922.403 to 1898.792 m²·g^-1) and tunable N sites compared with single nonmetal sacrificial templates. The regulatory mechanism of dual inorganic templates on N sites (N_P/N_G ≈ 1:1) is independent of the polymeric state of carbohydrate precursors or even the carbonization condition of the pyrolysis process. A series of carbon materials prepared by this strategy all have ORR-preferred structures and exhibit low ORR overpotentials compared with Pt/C. For instance, the Zn-air battery with βCD-DSC-950-1 exhibits an open-circuit potential of 1.51 V and a peak power density of 180.89 mW·cm^-2, higher than those of Pt/C (1.47 V, 174.94 mW·cm^-2). In general, the conversion of carbohydrate-containing small molecules to functional carbon materials provides a new strategy for the development of carbonaceous electrocatalysts.

A Model Procedure for Catalytic Conversion of Waste Cotton into Useful Chemicals

Cotton is grown in about 90 countries and accounts for 24% of the fibers used in the global production of textiles. In 2018/2019, 25.8 Mt of cotton were produced around the world. Since this natural product consists mainly of cellulose, it can be used as a raw material in the so-called “sugar economy”. This paper discusses a model procedure for thermally assisted acidic hydrolysis of cotton into glucose and subsequent oxidation of the glucose into calcium gluconate over Pd-Au/SiO₂ catalyst. In the first step, H₂SO₄ was used as a catalyst for hydrolysis. The cotton hydrolysates were neutralized using CaCO₃ and applied as a substrate in the second step, where glucose was oxidized over Pd-Au/SiO₂ prepared by ultrasound assisted co-impregnation. With the appropriate Au/Pd molar ratio, small crystallites of palladium and gold were created which were active and selective towards the formation of gluconate ions. This approach to the transformation of glucose represents as a viable alternative to biological processes using fungal and bacterial species, which are sensitive to the presence of inhibitors such as furfurals and levulinic acid in hydrolysates.

A porous heterostructure catalyst for oxygen evolution: synergy between IrP2nanocrystals and ultrathin P,N-codoped carbon nanosheets

Designing efficient and robust oxygen evolution reaction (OER) electrocatalysts is of great importance for various electrochemical energy storage and conversion applications. Herein, we developed IrP₂nanocrystals uniformly anchored in P,N-codoped carbon nanosheets (IrP₂@PNC-NS) as highly active OER electrocatalysts. The ultrathin PNC-NS reconstructs an agaric-like porous structure, which can inhibit the agglomeration of the IrP₂nanocrystals effectively. Moreover, thein-situphosphatization leads to the formation of a strong electron interaction between PNC-NS and IrP₂nanocrystals, endowing the heterostructure materials with satisfying synergistic effects. Benefiting from the collaborative advantages of ideal configuration structure and favorable synergistic effects, IrP₂@PNC-NS exhibits excellent OER performance with a low overpotential of 221 mV at 10 mA cm^-2, and a small Tafel slope of 37.5 mV dec^-1. DFT calculations reveal that the synergistic effects derived from the IrP₂/PNC interfaces, which can effectively tune the activation barriers towards facilitating the oxygen evolution process. This work provides new insight into the design of heterostructure materials for advanced OER electrocatalysts.

Confining Chainmail-Bearing Ni Nanoparticles in N-doped Carbon Nanotubes for Robust and Efficient Electroreduction of CO2

It still remains challenging to simultaneously achieve high stability, selectivity, and activity in CO₂ reduction. Herein, a dual chainmail-bearing nickel-based catalyst (Ni@NC@NCNT) was fabricated via a solvothermal-evaporation-calcination approach. In situ encapsulated N-doped carbon layers (NCs) and nanotubes (NCNTs) gave a dual protection to the metallic core. The confined space well maintained the local alkaline pH value and suppressed hydrogen evolution. Large surface area and abundant pyridinic N and Ni^δ+ sites ensured high CO₂ adsorption capacity and strength. Benefitting from these, it delivered a CO faradaic efficiency of 94.1 % and current density of 48.0 mA cm^-2 at -0.75 and -1.10 V, respectively. Moreover, the performance remained unchanged after continuous electrolysis for 43 h, far exceeding Ni@NC with single chainmail, Ni@NC/NCNT with Ni@NC sitting on the walls of NCNT, bare NCNT and most state-of-the-art catalysts, demonstrating structural superiority of Ni@NC@NCNT. This work sheds light on designing unique architectures to improve electrochemical performances.

Electroreduction of Carbon Dioxide Driven by the Intrinsic Defects in the Carbon Plane of a Single Fe-N4 Site

Manipulating the in-plane defects of metal-nitrogen-carbon catalysts to regulate the electroreduction reaction of CO₂ (CO₂ RR) remains a challenging task. Here, it is demonstrated that the activity of the intrinsic carbon defects can be dramatically improved through coupling with single-atom Fe-N₄ sites. The resulting catalyst delivers a maximum CO Faradaic efficiency of 90% and a CO partial current density of 33 mA cm^-2 in 0.1 m KHCO_3. The remarkable enhancements are maintained in concentrated electrolyte, endowing a rechargeable Zn-CO₂ battery with a high CO selectivity of 86.5% at 5 mA cm^-2 . Further analysis suggests that the intrinsic defect is the active sites for CO₂ RR, instead of the Fe-N₄ center. Density functional theory calculations reveal that the Fe-N₄ coupled intrinsic defect exhibits a reduced energy barrier for CO₂ RR and suppresses the hydrogen evolution activity. The high intrinsic activity, coupled with fast electron-transfer capability and abundant exposed active sites, induces excellent electrocatalytic performance.

C2N: A Class of Covalent Frameworks with Unique Properties

C2N is a unique member of the CnNm family (carbon nitrides), i.e., having a covalent structure that is ideally composed of carbon and nitrogen with only 33 mol% of nitrogen. C2N, with a stable composition, can easily be prepared using a number of precursors. Moreover, it is currently gaining extensive interest owing to its high polarity and good thermal and chemical stability, complementing carbon as well as classical carbon nitride (C3N4) in various applications, such as catalysis, environmental science, energy storage, and biotechnology. In this review, a comprehensive overview on C2N is provided; starting with its preparation methods, followed by a fundamental understanding of structure-property relationships, and finally introducing its application in gas sorption and separation technologies, as supercapacitor and battery electrodes, and in catalytic and biological processes. The review with an outlook on current research questions and future possibilities and extensions based on these material concepts is ended.

Synthesis of low dimensional hierarchical transition metal oxides via a direct deep eutectic solvent calcining method for enhanced oxygen evolution catalysis

Transition metal oxides (TMOs) are regarded as important materials due to their wide applications in catalysis, sensors, energy storage and conversion devices owing to their advantages of facile synthesis, low cost, and high activity. Here we develop a direct deep eutectic solvent (DES) calcining method to prepare low-dimensional and highly active TMOs for the electrochemical oxygen evolution reaction (OER). Glucose monohydrate and urea can form a glucose-urea DES, which was calcined under a N2 atmosphere to produce 2D N,O-doped graphene. When metal precursors were introduced into the glucose-urea DES and calcined together, the TMOs were templated by graphene flakes and exhibited low-dimensional morphologies. With this method, 2D nanonet-shaped La0.5Sr0.5Co0.8Fe0.2O3 (LSCF), Co3O4, NiCo2O4, and RuO2 and 1D nanowire-shaped Ba0.5Sr0.5Co0.8Fe0.2O3 (BSCF) were readily synthesized, and their thickness and porosity can be conveniently tuned by adjusting the concentrations of metal salts. Our nanostructured TMOs were further applied for the OER, and they showed quite competitive activities over their counterparts obtained from other methods. The 2D porous LSCF20-DES exhibited the largest specific surface area (28.9 m2 g-1) and the highest OER electrocatalytic activities (0.304 V overpotential at a current density of 10 mA cm-2). These results demonstrate that the DES calcining method is a comprehensive approach to synthesize hierarchical TMOs as highly active OER catalysts.